diff options
Diffstat (limited to 'arch/arm/mach-davinci')
44 files changed, 1736 insertions, 334 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 033bfede6b6..0ebe185610b 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -91,10 +91,14 @@ config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x + select MACH_DAVINCI_DM6467TEVM help Configure this option to specify the whether the board used for development is a DM6467 EVM +config MACH_DAVINCI_DM6467TEVM + bool + config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index eeb9230d884..6aac880eb79 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o -obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o +obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o cdce949.o obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o @@ -34,3 +34,4 @@ obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o # Power Management obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_SUSPEND) += pm.o sleep.o diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 31dc9901e55..dc19870b23c 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -112,7 +112,7 @@ static __init void da830_evm_usb_init(void) * Set up USB clock/mode in the CFGCHIP2 register. * FYI: CFGCHIP2 is 0x0000ef00 initially. */ - cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)); + cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); /* USB2.0 PHY reference clock is 24 MHz */ cfgchip2 &= ~CFGCHIP2_REFFREQ; @@ -139,7 +139,7 @@ static __init void da830_evm_usb_init(void) cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; #endif - __raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)); + __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); /* USB_REFCLKIN is not used. */ ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 07de8db1458..411284d0b0f 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -46,8 +46,20 @@ static struct mtd_partition da850_evm_norflash_partition[] = { { - .name = "NOR filesystem", + .name = "bootloaders + env", .offset = 0, + .size = SZ_512K, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0, + }, + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, .mask_flags = 0, }, @@ -77,6 +89,18 @@ static struct platform_device da850_evm_norflash_device = { .resource = da850_evm_norflash_resource, }; +static struct davinci_pm_config da850_pm_pdata = { + .sleepcount = 128, +}; + +static struct platform_device da850_pm_device = { + .name = "pm-davinci", + .dev = { + .platform_data = &da850_pm_pdata, + }, + .id = -1, +}; + /* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash * (128K blocks). It may be used instead of the (default) SPI flash * to boot, using TI's tools to install the secondary boot loader @@ -119,6 +143,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = { .parts = da850_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, + .ecc_bits = 4, .options = NAND_USE_FLASH_BBT, }; @@ -537,7 +562,7 @@ static int __init da850_evm_config_emac(void) if (!machine_is_davinci_da850_evm()) return 0; - cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG); + cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG); val = __raw_readl(cfg_chip3_base); @@ -696,6 +721,11 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: cpuidle registration failed: %d\n", ret); + + ret = da850_register_pm(&da850_pm_device); + if (ret) + pr_warning("da850_evm_init: suspend registration failed: %d\n", + ret); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 077ecf4fecd..aa48e3f6971 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -111,6 +111,8 @@ static struct platform_device davinci_nand_device = { static struct davinci_i2c_platform_data i2c_pdata = { .bus_freq = 400 /* kHz */, .bus_delay = 0 /* usec */, + .sda_pin = 15, + .scl_pin = 14, }; static struct snd_platform_data dm355_evm_snd_data; diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index b476395d2cd..df4ab210586 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -22,8 +22,11 @@ #include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/slab.h> #include <linux/mtd/nand.h> #include <linux/input.h> +#include <linux/spi/spi.h> +#include <linux/spi/eeprom.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -37,6 +40,8 @@ #include <mach/nand.h> #include <mach/keyscan.h> +#include <media/tvp514x.h> + static inline int have_imager(void) { /* REVISIT when it's supported, trigger via Kconfig */ @@ -306,6 +311,73 @@ static void dm365evm_mmc_configure(void) davinci_cfg_reg(DM365_SD1_DATA0); } +static struct tvp514x_platform_data tvp5146_pdata = { + .clk_polarity = 0, + .hs_polarity = 1, + .vs_polarity = 1 +}; + +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) +/* Inputs available at the TVP5146 */ +static struct v4l2_input tvp5146_inputs[] = { + { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = TVP514X_STD_ALL, + }, + { + .index = 1, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .std = TVP514X_STD_ALL, + }, +}; + +/* + * this is the route info for connecting each input to decoder + * ouput that goes to vpfe. There is a one to one correspondence + * with tvp5146_inputs + */ +static struct vpfe_route tvp5146_routes[] = { + { + .input = INPUT_CVBS_VI2B, + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, + }, +{ + .input = INPUT_SVIDEO_VI2C_VI1C, + .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, + }, +}; + +static struct vpfe_subdev_info vpfe_sub_devs[] = { + { + .name = "tvp5146", + .grp_id = 0, + .num_inputs = ARRAY_SIZE(tvp5146_inputs), + .inputs = tvp5146_inputs, + .routes = tvp5146_routes, + .can_route = 1, + .ccdc_if_params = { + .if_type = VPFE_BT656, + .hdpol = VPFE_PINPOL_POSITIVE, + .vdpol = VPFE_PINPOL_POSITIVE, + }, + .board_info = { + I2C_BOARD_INFO("tvp5146", 0x5d), + .platform_data = &tvp5146_pdata, + }, + }, +}; + +static struct vpfe_config vpfe_cfg = { + .num_subdevs = ARRAY_SIZE(vpfe_sub_devs), + .sub_devs = vpfe_sub_devs, + .i2c_adapter_id = 1, + .card_name = "DM365 EVM", + .ccdc = "ISIF", +}; + static void __init evm_init_i2c(void) { davinci_init_i2c(&i2c_pdata); @@ -497,9 +569,29 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm365_evm_map_io(void) { + /* setup input configuration for VPFE input devices */ + dm365_set_vpfe_config(&vpfe_cfg); dm365_init(); } +static struct spi_eeprom at25640 = { + .byte_len = SZ_64K / 8, + .name = "at25640", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm365_evm_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640, + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + static __init void dm365_evm_init(void) { evm_init_i2c(); @@ -516,6 +608,9 @@ static __init void dm365_evm_init(void) dm365_init_asp(&dm365_evm_snd_data); dm365_init_rtc(); dm365_init_ks(&dm365evm_ks_data); + + dm365_init_spi0(BIT(0), dm365_evm_spi_info, + ARRAY_SIZE(dm365_evm_spi_info)); } static __init void dm365_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index e9612cf727b..976e11b7fa4 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -629,6 +629,8 @@ static struct i2c_board_info __initdata i2c_info[] = { static struct davinci_i2c_platform_data i2c_pdata = { .bus_freq = 20 /* kHz */, .bus_delay = 100 /* usec */, + .sda_pin = 44, + .scl_pin = 43, }; static void __init evm_init_i2c(void) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 8d0b0e01c59..5ba3cb2daaa 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -30,6 +30,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/clk.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,54 +40,13 @@ #include <mach/serial.h> #include <mach/i2c.h> #include <mach/nand.h> +#include <mach/clock.h> +#include <mach/cdce949.h> -#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ - defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) -#define HAS_ATA 1 -#else -#define HAS_ATA 0 -#endif - -#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000 -#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000 +#include "clock.h" #define NAND_BLOCK_SIZE SZ_128K -/* CPLD Register 0 bits to control ATA */ -#define DM646X_EVM_ATA_RST BIT(0) -#define DM646X_EVM_ATA_PWD BIT(1) - -#define DM646X_EVM_PHY_MASK (0x2) -#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - -#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38) -#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c) -#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8)) -#define VCH2CLK_SYSCLK8 (BIT(9)) -#define VCH2CLK_AUXCLK (BIT(9) | BIT(8)) -#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12)) -#define VCH3CLK_SYSCLK8 (BIT(13)) -#define VCH3CLK_AUXCLK (BIT(14) | BIT(13)) - -#define VIDCH2CLK (BIT(10)) -#define VIDCH3CLK (BIT(11)) -#define VIDCH1CLK (BIT(4)) -#define TVP7002_INPUT (BIT(4)) -#define TVP5147_INPUT (~BIT(4)) -#define VPIF_INPUT_ONE_CHANNEL (BIT(5)) -#define VPIF_INPUT_TWO_CHANNEL (~BIT(5)) -#define TVP5147_CH0 "tvp514x-0" -#define TVP5147_CH1 "tvp514x-1" - -static void __iomem *vpif_vidclkctl_reg; -static void __iomem *vpif_vsclkdis_reg; -/* spin lock for updating above registers */ -static spinlock_t vpif_reg_lock; - -static struct davinci_uart_config uart_config __initdata = { - .enabled_uarts = (1 << 0), -}; - /* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot * and U-Boot environment this avoids dependency on any particular combination * of UBL, U-Boot or flashing tools etc. @@ -120,6 +80,9 @@ static struct davinci_nand_pdata davinci_nand_data = { .options = 0, }; +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000 + static struct resource davinci_nand_resources[] = { { .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, @@ -144,6 +107,17 @@ static struct platform_device davinci_nand_device = { }, }; +#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \ + defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE) +#define HAS_ATA 1 +#else +#define HAS_ATA 0 +#endif + +/* CPLD Register 0 bits to control ATA */ +#define DM646X_EVM_ATA_RST BIT(0) +#define DM646X_EVM_ATA_PWD BIT(1) + /* CPLD Register 0 Client: used for I/O Control */ static int cpld_reg0_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -417,6 +391,9 @@ static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("cpld_video", 0x3b), }, + { + I2C_BOARD_INFO("cdce949", 0x6c), + }, }; static struct davinci_i2c_platform_data i2c_pdata = { @@ -424,6 +401,30 @@ static struct davinci_i2c_platform_data i2c_pdata = { .bus_delay = 0 /* usec */, }; +#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38) +#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c) +#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8)) +#define VCH2CLK_SYSCLK8 (BIT(9)) +#define VCH2CLK_AUXCLK (BIT(9) | BIT(8)) +#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12)) +#define VCH3CLK_SYSCLK8 (BIT(13)) +#define VCH3CLK_AUXCLK (BIT(14) | BIT(13)) + +#define VIDCH2CLK (BIT(10)) +#define VIDCH3CLK (BIT(11)) +#define VIDCH1CLK (BIT(4)) +#define TVP7002_INPUT (BIT(4)) +#define TVP5147_INPUT (~BIT(4)) +#define VPIF_INPUT_ONE_CHANNEL (BIT(5)) +#define VPIF_INPUT_TWO_CHANNEL (~BIT(5)) +#define TVP5147_CH0 "tvp514x-0" +#define TVP5147_CH1 "tvp514x-1" + +static void __iomem *vpif_vidclkctl_reg; +static void __iomem *vpif_vsclkdis_reg; +/* spin lock for updating above registers */ +static spinlock_t vpif_reg_lock; + static int set_vpif_clock(int mux_mode, int hd) { unsigned long flags; @@ -685,11 +686,44 @@ static void __init evm_init_i2c(void) evm_init_video(); } +#define CDCE949_XIN_RATE 27000000 + +/* CDCE949 support - "lpsc" field is overridden to work as clock number */ +static struct clk cdce_clk_in = { + .name = "cdce_xin", + .rate = CDCE949_XIN_RATE, +}; + +static struct clk_lookup cdce_clks[] = { + CLK(NULL, "xin", &cdce_clk_in), + CLK(NULL, NULL, NULL), +}; + +static void __init cdce_clk_init(void) +{ + struct clk_lookup *c; + struct clk *clk; + + for (c = cdce_clks; c->clk; c++) { + clk = c->clk; + clkdev_add(c); + clk_register(clk); + } +} + static void __init davinci_map_io(void) { dm646x_init(); + cdce_clk_init(); } +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +#define DM646X_EVM_PHY_MASK (0x2) +#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + static __init void evm_init(void) { struct davinci_soc_info *soc_info = &davinci_soc_info; @@ -713,6 +747,17 @@ static __init void davinci_dm646x_evm_irq_init(void) davinci_irq_init(); } +#define DM646X_EVM_REF_FREQ 27000000 +#define DM6467T_EVM_REF_FREQ 33000000 + +void __init dm646x_board_setup_refclk(struct clk *clk) +{ + if (machine_is_davinci_dm6467tevm()) + clk->rate = DM6467T_EVM_REF_FREQ; + else + clk->rate = DM646X_EVM_REF_FREQ; +} + MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") .phys_io = IO_PHYS, .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, @@ -723,3 +768,13 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") .init_machine = evm_init, MACHINE_END +MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = davinci_map_io, + .init_irq = davinci_dm646x_evm_irq_init, + .timer = &davinci_timer, + .init_machine = evm_init, +MACHINE_END + diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c new file mode 100644 index 00000000000..aec37569054 --- /dev/null +++ b/arch/arm/mach-davinci/cdce949.c @@ -0,0 +1,293 @@ +/* + * TI CDCE949 clock synthesizer driver + * + * Note: This implementation assumes an input of 27MHz to the CDCE. + * This is by no means constrained by CDCE hardware although the datasheet + * does use this as an example for all illustrations and more importantly: + * that is the crystal input on boards it is currently used on. + * + * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> + +#include <mach/clock.h> + +#include "clock.h" + +static struct i2c_client *cdce_i2c_client; +static DEFINE_MUTEX(cdce_mutex); + +/* CDCE register descriptor */ +struct cdce_reg { + u8 addr; + u8 val; +}; + +/* Per-Output (Y1, Y2 etc.) frequency descriptor */ +struct cdce_freq { + /* Frequency in KHz */ + unsigned long frequency; + /* + * List of registers to program to obtain a particular frequency. + * 0x0 in register address and value is the end of list marker. + */ + struct cdce_reg *reglist; +}; + +#define CDCE_FREQ_TABLE_ENTRY(line, out) \ +{ \ + .reglist = cdce_y ##line## _ ##out, \ + .frequency = out, \ +} + +/* List of CDCE outputs */ +struct cdce_output { + /* List of frequencies on this output */ + struct cdce_freq *freq_table; + /* Number of possible frequencies */ + int size; +}; + +/* + * Finding out the values to program into CDCE949 registers for a particular + * frequency output is not a simple calculation. Have a look at the datasheet + * for the details. There is desktop software available to help users with + * the calculations. Here, we just depend on the output of that software + * (or hand calculations) instead trying to runtime calculate the register + * values and inflicting misery on ourselves. + */ +static struct cdce_reg cdce_y1_148500[] = { + { 0x13, 0x00 }, + /* program PLL1_0 multiplier */ + { 0x18, 0xaf }, + { 0x19, 0x50 }, + { 0x1a, 0x02 }, + { 0x1b, 0xc9 }, + /* program PLL1_11 multiplier */ + { 0x1c, 0x00 }, + { 0x1d, 0x40 }, + { 0x1e, 0x02 }, + { 0x1f, 0xc9 }, + /* output state selection */ + { 0x15, 0x00 }, + { 0x14, 0xef }, + /* switch MUX to PLL1 output */ + { 0x14, 0x6f }, + { 0x16, 0x06 }, + /* set P2DIV divider, P3DIV and input crystal */ + { 0x17, 0x06 }, + { 0x01, 0x00 }, + { 0x05, 0x48 }, + { 0x02, 0x80 }, + /* enable and disable PLL */ + { 0x02, 0xbc }, + { 0x03, 0x01 }, + { }, +}; + +static struct cdce_reg cdce_y1_74250[] = { + { 0x13, 0x00 }, + { 0x18, 0xaf }, + { 0x19, 0x50 }, + { 0x1a, 0x02 }, + { 0x1b, 0xc9 }, + { 0x1c, 0x00 }, + { 0x1d, 0x40 }, + { 0x1e, 0x02 }, + { 0x1f, 0xc9 }, + /* output state selection */ + { 0x15, 0x00 }, + { 0x14, 0xef }, + /* switch MUX to PLL1 output */ + { 0x14, 0x6f }, + { 0x16, 0x06 }, + /* set P2DIV divider, P3DIV and input crystal */ + { 0x17, 0x06 }, + { 0x01, 0x00 }, + { 0x05, 0x48 }, + { 0x02, 0x80 }, + /* enable and disable PLL */ + { 0x02, 0xbc }, + { 0x03, 0x02 }, + { }, +}; + +static struct cdce_reg cdce_y1_27000[] = { + { 0x13, 0x00 }, + { 0x18, 0x00 }, + { 0x19, 0x40 }, + { 0x1a, 0x02 }, + { 0x1b, 0x08 }, + { 0x1c, 0x00 }, + { 0x1d, 0x40 }, + { 0x1e, 0x02 }, + { 0x1f, 0x08 }, + { 0x15, 0x02 }, + { 0x14, 0xed }, + { 0x16, 0x01 }, + { 0x17, 0x01 }, + { 0x01, 0x00 }, + { 0x05, 0x50 }, + { 0x02, 0xb4 }, + { 0x03, 0x01 }, + { }, +}; + +static struct cdce_freq cdce_y1_freqs[] = { + CDCE_FREQ_TABLE_ENTRY(1, 148500), + CDCE_FREQ_TABLE_ENTRY(1, 74250), + CDCE_FREQ_TABLE_ENTRY(1, 27000), +}; + +static struct cdce_reg cdce_y5_13500[] = { + { 0x27, 0x08 }, + { 0x28, 0x00 }, + { 0x29, 0x40 }, + { 0x2a, 0x02 }, + { 0x2b, 0x08 }, + { 0x24, 0x6f }, + { }, +}; + +static struct cdce_reg cdce_y5_16875[] = { + { 0x27, 0x08 }, + { 0x28, 0x9f }, + { 0x29, 0xb0 }, + { 0x2a, 0x02 }, + { 0x2b, 0x89 }, + { 0x24, 0x6f }, + { }, +}; + +static struct cdce_reg cdce_y5_27000[] = { + { 0x27, 0x04 }, + { 0x28, 0x00 }, + { 0x29, 0x40 }, + { 0x2a, 0x02 }, + { 0x2b, 0x08 }, + { 0x24, 0x6f }, + { }, +}; +static struct cdce_reg cdce_y5_54000[] = { + { 0x27, 0x04 }, + { 0x28, 0xff }, + { 0x29, 0x80 }, + { 0x2a, 0x02 }, + { 0x2b, 0x07 }, + { 0x24, 0x6f }, + { }, +}; + +static struct cdce_reg cdce_y5_81000[] = { + { 0x27, 0x02 }, + { 0x28, 0xbf }, + { 0x29, 0xa0 }, + { 0x2a, 0x03 }, + { 0x2b, 0x0a }, + { 0x24, 0x6f }, + { }, +}; + +static struct cdce_freq cdce_y5_freqs[] = { + CDCE_FREQ_TABLE_ENTRY(5, 13500), + CDCE_FREQ_TABLE_ENTRY(5, 16875), + CDCE_FREQ_TABLE_ENTRY(5, 27000), + CDCE_FREQ_TABLE_ENTRY(5, 54000), + CDCE_FREQ_TABLE_ENTRY(5, 81000), +}; + + +static struct cdce_output output_list[] = { + [1] = { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) }, + [5] = { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) }, +}; + +int cdce_set_rate(struct clk *clk, unsigned long rate) +{ + int i, ret = 0; + struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table; + struct cdce_reg *regs = NULL; + + if (!cdce_i2c_client) + return -ENODEV; + + if (!freq_table) + return -EINVAL; + + for (i = 0; i < output_list[clk->lpsc].size; i++) { + if (freq_table[i].frequency == rate / 1000) { + regs = freq_table[i].reglist; + break; + } + } + + if (!regs) + return -EINVAL; + + mutex_lock(&cdce_mutex); + for (i = 0; regs[i].addr; i++) { + ret = i2c_smbus_write_byte_data(cdce_i2c_client, + regs[i].addr | 0x80, regs[i].val); + if (ret) + break; + } + mutex_unlock(&cdce_mutex); + + if (!ret) + clk->rate = rate; + + return ret; +} + +static int cdce_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + cdce_i2c_client = client; + return 0; +} + +static int __devexit cdce_remove(struct i2c_client *client) +{ + cdce_i2c_client = NULL; + return 0; +} + +static const struct i2c_device_id cdce_id[] = { + {"cdce949", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, cdce_id); + +static struct i2c_driver cdce_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "cdce949", + }, + .probe = cdce_probe, + .remove = __devexit_p(cdce_remove), + .id_table = cdce_id, +}; + +static int __init cdce_init(void) +{ + return i2c_add_driver(&cdce_driver); +} +subsys_initcall(cdce_init); + +static void __exit cdce_exit(void) +{ + i2c_del_driver(&cdce_driver); +} +module_exit(cdce_exit); + +MODULE_AUTHOR("Texas Instruments"); +MODULE_DESCRIPTION("CDCE949 clock synthesizer driver"); +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index baece65cb9c..bf6218ee94e 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -49,7 +49,8 @@ static void __clk_disable(struct clk *clk) { if (WARN_ON(clk->usecount == 0)) return; - if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) + if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) && + (clk->flags & CLK_PSC)) davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0); if (clk->parent) __clk_disable(clk->parent); @@ -124,9 +125,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (clk == NULL || IS_ERR(clk)) return ret; - spin_lock_irqsave(&clockfw_lock, flags); if (clk->set_rate) ret = clk->set_rate(clk, rate); + + spin_lock_irqsave(&clockfw_lock, flags); if (ret == 0) { if (clk->recalc) clk->rate = clk->recalc(clk); @@ -363,6 +365,7 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, { u32 ctrl; unsigned int locktime; + unsigned long flags; if (pll->base == NULL) return -EINVAL; @@ -376,25 +379,23 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, locktime = ((2000 * prediv) / 100); prediv = (prediv - 1) | PLLDIV_EN; } else { - locktime = 20; + locktime = PLL_LOCK_TIME; } if (postdiv) postdiv = (postdiv - 1) | PLLDIV_EN; if (mult) mult = mult - 1; + /* Protect against simultaneous calls to PLL setting seqeunce */ + spin_lock_irqsave(&clockfw_lock, flags); + ctrl = __raw_readl(pll->base + PLLCTL); /* Switch the PLL to bypass mode */ ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); __raw_writel(ctrl, pll->base + PLLCTL); - /* - * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched - * to bypass mode. Delay of 1us ensures we are good for all > 4MHz - * OSCIN/CLKIN inputs. Typically the input is ~25MHz. - */ - udelay(1); + udelay(PLL_BYPASS_TIME); /* Reset and enable PLL */ ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS); @@ -408,11 +409,7 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, if (pll->flags & PLL_HAS_POSTDIV) __raw_writel(postdiv, pll->base + POSTDIV); - /* - * Wait for PLL to reset properly, OMAP-L138 datasheet says - * 'min' time = 125ns - */ - udelay(1); + udelay(PLL_RESET_TIME); /* Bring PLL out of reset */ ctrl |= PLLCTL_PLLRST; @@ -424,17 +421,20 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, ctrl |= PLLCTL_PLLEN; __raw_writel(ctrl, pll->base + PLLCTL); + spin_unlock_irqrestore(&clockfw_lock, flags); + return 0; } EXPORT_SYMBOL(davinci_set_pllrate); -int __init davinci_clk_init(struct davinci_clk *clocks) +int __init davinci_clk_init(struct clk_lookup *clocks) { - struct davinci_clk *c; + struct clk_lookup *c; struct clk *clk; + size_t num_clocks = 0; - for (c = clocks; c->lk.clk; c++) { - clk = c->lk.clk; + for (c = clocks; c->clk; c++) { + clk = c->clk; if (!clk->recalc) { @@ -457,35 +457,23 @@ int __init davinci_clk_init(struct davinci_clk *clocks) if (clk->lpsc) clk->flags |= CLK_PSC; - clkdev_add(&c->lk); clk_register(clk); + num_clocks++; /* Turn on clocks that Linux doesn't otherwise manage */ if (clk->flags & ALWAYS_ENABLED) clk_enable(clk); } - return 0; -} - -#ifdef CONFIG_PROC_FS -#include <linux/proc_fs.h> -#include <linux/seq_file.h> + clkdev_add_table(clocks, num_clocks); -static void *davinci_ck_start(struct seq_file *m, loff_t *pos) -{ - return *pos < 1 ? (void *)1 : NULL; + return 0; } -static void *davinci_ck_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return NULL; -} +#ifdef CONFIG_DEBUG_FS -static void davinci_ck_stop(struct seq_file *m, void *v) -{ -} +#include <linux/debugfs.h> +#include <linux/seq_file.h> #define CLKNAME_MAX 10 /* longest clock name */ #define NEST_DELTA 2 @@ -525,41 +513,38 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent) static int davinci_ck_show(struct seq_file *m, void *v) { - /* Show clock tree; we know the main oscillator is first. - * We trust nonzero usecounts equate to PSC enables... + struct clk *clk; + + /* + * Show clock tree; We trust nonzero usecounts equate to PSC enables... */ mutex_lock(&clocks_mutex); - if (!list_empty(&clocks)) - dump_clock(m, 0, list_first_entry(&clocks, struct clk, node)); + list_for_each_entry(clk, &clocks, node) + if (!clk->parent) + dump_clock(m, 0, clk); mutex_unlock(&clocks_mutex); return 0; } -static const struct seq_operations davinci_ck_op = { - .start = davinci_ck_start, - .next = davinci_ck_next, - .stop = davinci_ck_stop, - .show = davinci_ck_show -}; - static int davinci_ck_open(struct inode *inode, struct file *file) { - return seq_open(file, &davinci_ck_op); + return single_open(file, davinci_ck_show, NULL); } -static const struct file_operations proc_davinci_ck_operations = { +static const struct file_operations davinci_ck_operations = { .open = davinci_ck_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; -static int __init davinci_ck_proc_init(void) +static int __init davinci_clk_debugfs_init(void) { - proc_create("davinci_clocks", 0, NULL, &proc_davinci_ck_operations); + debugfs_create_file("davinci_clocks", S_IFREG | S_IRUGO, NULL, NULL, + &davinci_ck_operations); return 0; } -__initcall(davinci_ck_proc_init); -#endif /* CONFIG_DEBUG_PROC_FS */ +device_initcall(davinci_clk_debugfs_init); +#endif /* CONFIG_DEBUG_FS */ diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index c92d77a3008..aa0a6115032 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -12,9 +12,6 @@ #ifndef __ARCH_ARM_DAVINCI_CLOCK_H #define __ARCH_ARM_DAVINCI_CLOCK_H -#include <linux/list.h> -#include <asm/clkdev.h> - #define DAVINCI_PLL1_BASE 0x01c40800 #define DAVINCI_PLL2_BASE 0x01c40c00 #define MAX_PLL 2 @@ -53,6 +50,26 @@ #define PLLDIV_EN BIT(15) #define PLLDIV_RATIO_MASK 0x1f +/* + * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN + * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us + * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input + * is ~25MHz. Units are micro seconds. + */ +#define PLL_BYPASS_TIME 1 +/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */ +#define PLL_RESET_TIME 1 +/* + * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4 + * Units are micro seconds. + */ +#define PLL_LOCK_TIME 20 + +#ifndef __ASSEMBLER__ + +#include <linux/list.h> +#include <asm/clkdev.h> + struct pll_data { u32 phys_base; void __iomem *base; @@ -89,23 +106,19 @@ struct clk { #define CLK_PLL BIT(4) /* PLL-derived clock */ #define PRE_PLL BIT(5) /* source is before PLL mult/div */ -struct davinci_clk { - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck) \ - { \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } +#define CLK(dev, con, ck) \ + { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + } \ -int davinci_clk_init(struct davinci_clk *clocks); +int davinci_clk_init(struct clk_lookup *clocks); int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, unsigned int mult, unsigned int postdiv); extern struct platform_device davinci_wdt_device; #endif + +#endif diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index c2de94cde56..94f27cbcd55 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -11,13 +11,13 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/etherdevice.h> +#include <linux/davinci_emac.h> #include <asm/tlb.h> #include <asm/mach/map.h> #include <mach/common.h> #include <mach/cputype.h> -#include <mach/emac.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c index 97a90f36fc9..bd59f31b8a9 100644 --- a/arch/arm/mach-davinci/cpuidle.c +++ b/arch/arm/mach-davinci/cpuidle.c @@ -19,6 +19,7 @@ #include <asm/proc-fns.h> #include <mach/cpuidle.h> +#include <mach/memory.h> #define DAVINCI_CPUIDLE_MAX_STATES 2 @@ -39,10 +40,6 @@ static struct cpuidle_driver davinci_idle_driver = { static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device); static void __iomem *ddr2_reg_base; -#define DDR2_SDRCR_OFFSET 0xc -#define DDR2_SRPD_BIT BIT(23) -#define DDR2_LPMODEN_BIT BIT(31) - static void davinci_save_ddr_power(int enter, bool pdown) { u32 val; @@ -109,8 +106,6 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) int ret; struct cpuidle_device *device; struct davinci_cpuidle_config *pdata = pdev->dev.platform_data; - struct resource *ddr2_regs; - resource_size_t len; device = &per_cpu(davinci_cpuidle_device, smp_processor_id()); @@ -119,28 +114,12 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) return -ENOENT; } - ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!ddr2_regs) { - dev_err(&pdev->dev, "cannot get DDR2 controller register base"); - return -ENODEV; - } - - len = resource_size(ddr2_regs); - - ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name); - if (!ddr2_regs) - return -EBUSY; - - ddr2_reg_base = ioremap(ddr2_regs->start, len); - if (!ddr2_reg_base) { - ret = -ENOMEM; - goto ioremap_fail; - } + ddr2_reg_base = pdata->ddr2_ctlr_base; ret = cpuidle_register_driver(&davinci_idle_driver); if (ret) { dev_err(&pdev->dev, "failed to register driver\n"); - goto driver_register_fail; + return ret; } /* Wait for interrupt state */ @@ -167,18 +146,11 @@ static int __init davinci_cpuidle_probe(struct platform_device *pdev) ret = cpuidle_register_device(device); if (ret) { dev_err(&pdev->dev, "failed to register device\n"); - goto device_register_fail; + cpuidle_unregister_driver(&davinci_idle_driver); + return ret; } return 0; - -device_register_fail: - cpuidle_unregister_driver(&davinci_idle_driver); -driver_register_fail: - iounmap(ddr2_reg_base); -ioremap_fail: - release_mem_region(ddr2_regs->start, len); - return ret; } static struct platform_driver davinci_cpuidle_driver = { diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index b22b5cf0425..e8cb982f5e8 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -371,7 +371,7 @@ static struct clk rmii_clk = { .parent = &pll0_sysclk7, }; -static struct davinci_clk da830_clks[] = { +static struct clk_lookup da830_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), CLK(NULL, "pll0_aux", &pll0_aux_clk), @@ -410,7 +410,7 @@ static struct davinci_clk da830_clks[] = { CLK("davinci-mcasp.0", NULL, &mcasp0_clk), CLK("davinci-mcasp.1", NULL, &mcasp1_clk), CLK("davinci-mcasp.2", NULL, &mcasp2_clk), - CLK("musb_hdrc", NULL, &usb20_clk), + CLK(NULL, "usb20", &usb20_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, "aintc", &aintc_clk), CLK(NULL, "secu_mgr", &secu_mgr_clk), @@ -1208,13 +1208,13 @@ static struct davinci_soc_info davinci_soc_info_da830 = { void __init da830_init(void) { - da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K); - if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module")) + da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K); + if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module")) return; davinci_soc_info_da830.jtag_id_base = - DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG); - davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120); + DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG); + davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120); davinci_common_init(&davinci_soc_info_da830); } diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 717806c6cef..d0fd7566712 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -26,6 +26,7 @@ #include <mach/time.h> #include <mach/da8xx.h> #include <mach/cpufreq.h> +#include <mach/pm.h> #include "clock.h" #include "mux.h" @@ -40,6 +41,7 @@ #define DA850_REF_FREQ 24000000 #define CFGCHIP3_ASYNC3_CLKSRC BIT(4) +#define CFGCHIP3_PLL1_MASTER_LOCK BIT(5) #define CFGCHIP0_PLL_MASTER_LOCK BIT(4) static int da850_set_armrate(struct clk *clk, unsigned long rate); @@ -333,7 +335,7 @@ static struct clk aemif_clk = { .flags = ALWAYS_ENABLED, }; -static struct davinci_clk da850_clks[] = { +static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), CLK(NULL, "pll0_aux", &pll0_aux_clk), @@ -535,6 +537,7 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false) MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false) MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false) + MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false) #endif }; @@ -770,6 +773,12 @@ static struct map_desc da850_io_desc[] = { .length = DA8XX_CP_INTC_SIZE, .type = MT_DEVICE }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(DA8XX_ARM_RAM_BASE), + .length = SZ_8K, + .type = MT_DEVICE + }, }; static void __iomem *da850_psc_bases[] = { @@ -825,12 +834,12 @@ static struct davinci_timer_info da850_timer_info = { static void da850_set_async3_src(int pllnum) { struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2; - struct davinci_clk *c; + struct clk_lookup *c; unsigned int v; int ret; - for (c = da850_clks; c->lk.clk; c++) { - clk = c->lk.clk; + for (c = da850_clks; c->clk; c++) { + clk = c->clk; if (clk->flags & DA850_CLK_ASYNC3) { ret = clk_set_parent(clk, newparent); WARN(ret, "DA850: unable to re-parent clock %s", @@ -838,12 +847,12 @@ static void da850_set_async3_src(int pllnum) } } - v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG)); + v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); if (pllnum) v |= CFGCHIP3_ASYNC3_CLKSRC; else v &= ~CFGCHIP3_ASYNC3_CLKSRC; - __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG)); + __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); } #ifdef CONFIG_CPU_FREQ @@ -987,7 +996,6 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index) unsigned int prediv, mult, postdiv; struct da850_opp *opp; struct pll_data *pll = clk->pll_data; - unsigned int v; int ret; opp = (struct da850_opp *) da850_freq_table[index].index; @@ -995,11 +1003,6 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index) mult = opp->mult; postdiv = opp->postdiv; - /* Unlock writing to PLL registers */ - v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG)); - v &= ~CFGCHIP0_PLL_MASTER_LOCK; - __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG)); - ret = davinci_set_pllrate(pll, prediv, mult, postdiv); if (WARN_ON(ret)) return ret; @@ -1028,6 +1031,43 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate) } #endif +int da850_register_pm(struct platform_device *pdev) +{ + int ret; + struct davinci_pm_config *pdata = pdev->dev.platform_data; + + ret = davinci_cfg_reg(DA850_RTC_ALARM); + if (ret) + return ret; + + pdata->ddr2_ctlr_base = da8xx_get_mem_ctlr(); + pdata->deepsleep_reg = DA8XX_SYSCFG1_VIRT(DA8XX_DEEPSLEEP_REG); + pdata->ddrpsc_num = DA8XX_LPSC1_EMIF3C; + + pdata->cpupll_reg_base = ioremap(DA8XX_PLL0_BASE, SZ_4K); + if (!pdata->cpupll_reg_base) + return -ENOMEM; + + pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K); + if (!pdata->ddrpll_reg_base) { + ret = -ENOMEM; + goto no_ddrpll_mem; + } + + pdata->ddrpsc_reg_base = ioremap(DA8XX_PSC1_BASE, SZ_4K); + if (!pdata->ddrpsc_reg_base) { + ret = -ENOMEM; + goto no_ddrpsc_mem; + } + + return platform_device_register(pdev); + +no_ddrpsc_mem: + iounmap(pdata->ddrpll_reg_base); +no_ddrpll_mem: + iounmap(pdata->cpupll_reg_base); + return ret; +} static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, @@ -1049,17 +1089,25 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, + .sram_dma = DA8XX_ARM_RAM_BASE, + .sram_len = SZ_8K, }; void __init da850_init(void) { - da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K); - if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module")) + unsigned int v; + + da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K); + if (WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module")) + return; + + da8xx_syscfg1_base = ioremap(DA8XX_SYSCFG1_BASE, SZ_4K); + if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module")) return; davinci_soc_info_da850.jtag_id_base = - DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG); - davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120); + DA8XX_SYSCFG0_VIRT(DA8XX_JTAG_ID_REG); + davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG0_VIRT(0x120); davinci_common_init(&davinci_soc_info_da850); @@ -1071,4 +1119,14 @@ void __init da850_init(void) * be any noticible change even in non-DVFS use cases. */ da850_set_async3_src(1); + + /* Unlock writing to PLL0 registers */ + v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG)); + v &= ~CFGCHIP0_PLL_MASTER_LOCK; + __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG)); + + /* Unlock writing to PLL1 registers */ + v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); + v &= ~CFGCHIP3_PLL1_MASTER_LOCK; + __raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG)); } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index a5105f03fd8..0a96791d3b0 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,8 +24,10 @@ #include "clock.h" #define DA8XX_TPCC_BASE 0x01c00000 +#define DA850_TPCC1_BASE 0x01e30000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 +#define DA850_TPTC2_BASE 0x01e38000 #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 #define DA8XX_RTC_BASE 0x01C23000 @@ -42,7 +44,8 @@ #define DA8XX_MDIO_REG_OFFSET 0x4000 #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K -void __iomem *da8xx_syscfg_base; +void __iomem *da8xx_syscfg0_base; +void __iomem *da8xx_syscfg1_base; static struct plat_serial8250_port da8xx_serial_pdata[] = { { @@ -82,11 +85,6 @@ struct platform_device da8xx_serial_device = { }, }; -static const s8 da8xx_dma_chan_no_event[] = { - 20, 21, - -1 -}; - static const s8 da8xx_queue_tc_mapping[][2] = { /* {event queue no, TC no} */ {0, 0}, @@ -101,20 +99,52 @@ static const s8 da8xx_queue_priority_mapping[][2] = { {-1, -1} }; -static struct edma_soc_info da8xx_edma_info[] = { +static const s8 da850_queue_tc_mapping[][2] = { + /* {event queue no, TC no} */ + {0, 0}, + {-1, -1} +}; + +static const s8 da850_queue_priority_mapping[][2] = { + /* {event queue no, Priority} */ + {0, 3}, + {-1, -1} +}; + +static struct edma_soc_info da830_edma_info[] = { { .n_channel = 32, .n_region = 4, .n_slot = 128, .n_tc = 2, .n_cc = 1, - .noevent = da8xx_dma_chan_no_event, .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, }, }; -static struct resource da8xx_edma_resources[] = { +static struct edma_soc_info da850_edma_info[] = { + { + .n_channel = 32, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .n_cc = 1, + .queue_tc_mapping = da8xx_queue_tc_mapping, + .queue_priority_mapping = da8xx_queue_priority_mapping, + }, + { + .n_channel = 32, + .n_region = 4, + .n_slot = 128, + .n_tc = 1, + .n_cc = 1, + .queue_tc_mapping = da850_queue_tc_mapping, + .queue_priority_mapping = da850_queue_priority_mapping, + }, +}; + +static struct resource da830_edma_resources[] = { { .name = "edma_cc0", .start = DA8XX_TPCC_BASE, @@ -145,19 +175,91 @@ static struct resource da8xx_edma_resources[] = { }, }; -static struct platform_device da8xx_edma_device = { +static struct resource da850_edma_resources[] = { + { + .name = "edma_cc0", + .start = DA8XX_TPCC_BASE, + .end = DA8XX_TPCC_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = DA8XX_TPTC0_BASE, + .end = DA8XX_TPTC0_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = DA8XX_TPTC1_BASE, + .end = DA8XX_TPTC1_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_cc1", + .start = DA850_TPCC1_BASE, + .end = DA850_TPCC1_BASE + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc2", + .start = DA850_TPTC2_BASE, + .end = DA850_TPTC2_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma0", + .start = IRQ_DA8XX_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .name = "edma0_err", + .start = IRQ_DA8XX_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + { + .name = "edma1", + .start = IRQ_DA850_CCINT1, + .flags = IORESOURCE_IRQ, + }, + { + .name = "edma1_err", + .start = IRQ_DA850_CCERRINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da830_edma_device = { .name = "edma", .id = -1, .dev = { - .platform_data = da8xx_edma_info, + .platform_data = da830_edma_info, }, - .num_resources = ARRAY_SIZE(da8xx_edma_resources), - .resource = da8xx_edma_resources, + .num_resources = ARRAY_SIZE(da830_edma_resources), + .resource = da830_edma_resources, +}; + +static struct platform_device da850_edma_device = { + .name = "edma", + .id = -1, + .dev = { + .platform_data = da850_edma_info, + }, + .num_resources = ARRAY_SIZE(da850_edma_resources), + .resource = da850_edma_resources, }; int __init da8xx_register_edma(void) { - return platform_device_register(&da8xx_edma_device); + struct platform_device *pdev; + + if (cpu_is_davinci_da830()) + pdev = &da830_edma_device; + else if (cpu_is_davinci_da850()) + pdev = &da850_edma_device; + else + return -ENODEV; + + return platform_device_register(pdev); } static struct resource da8xx_i2c_resources0[] = { @@ -495,6 +597,19 @@ int da8xx_register_rtc(void) return ret; } +static void __iomem *da8xx_ddr2_ctlr_base; +void __iomem * __init da8xx_get_mem_ctlr(void) +{ + if (da8xx_ddr2_ctlr_base) + return da8xx_ddr2_ctlr_base; + + da8xx_ddr2_ctlr_base = ioremap(DA8XX_DDR2_CTL_BASE, SZ_32K); + if (!da8xx_ddr2_ctlr_base) + pr_warning("%s: Unable to map DDR2 controller", __func__); + + return da8xx_ddr2_ctlr_base; +} + static struct resource da8xx_cpuidle_resources[] = { { .start = DA8XX_DDR2_CTL_BASE, @@ -520,6 +635,7 @@ static struct platform_device da8xx_cpuidle_device = { int __init da8xx_register_cpuidle(void) { + da8xx_cpuidle_pdata.ddr2_ctlr_base = da8xx_get_mem_ctlr(); + return platform_device_register(&da8xx_cpuidle_device); } - diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index dedf4d4f3a2..3dc0a88712e 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -29,6 +29,7 @@ #include <mach/serial.h> #include <mach/common.h> #include <mach/asp.h> +#include <mach/spi.h> #include "clock.h" #include "mux.h" @@ -125,7 +126,6 @@ static struct clk vpss_slave_clk = { .lpsc = DAVINCI_LPSC_VPSSSLV, }; - static struct clk clkout1_clk = { .name = "clkout1", .parent = &pll1_aux_clk, @@ -335,7 +335,7 @@ static struct clk usb_clk = { .lpsc = DAVINCI_LPSC_USB, }; -static struct davinci_clk dm355_clks[] = { +static struct clk_lookup dm355_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll1", &pll1_clk), CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), @@ -363,9 +363,9 @@ static struct davinci_clk dm355_clks[] = { CLK("davinci-asp.1", NULL, &asp1_clk), CLK("davinci_mmc.0", NULL, &mmcsd0_clk), CLK("davinci_mmc.1", NULL, &mmcsd1_clk), - CLK(NULL, "spi0", &spi0_clk), - CLK(NULL, "spi1", &spi1_clk), - CLK(NULL, "spi2", &spi2_clk), + CLK("spi_davinci.0", NULL, &spi0_clk), + CLK("spi_davinci.1", NULL, &spi1_clk), + CLK("spi_davinci.2", NULL, &spi2_clk), CLK(NULL, "gpio", &gpio_clk), CLK(NULL, "aemif", &aemif_clk), CLK(NULL, "pwm0", &pwm0_clk), @@ -392,24 +392,40 @@ static struct resource dm355_spi0_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IRQ_DM355_SPINT0_1, + .start = IRQ_DM355_SPINT0_0, .flags = IORESOURCE_IRQ, }, - /* Not yet used, so not included: - * IORESOURCE_IRQ: - * - IRQ_DM355_SPINT0_0 - * IORESOURCE_DMA: - * - DAVINCI_DMA_SPI_SPIX - * - DAVINCI_DMA_SPI_SPIR - */ + { + .start = 17, + .flags = IORESOURCE_DMA, + }, + { + .start = 16, + .flags = IORESOURCE_DMA, + }, + { + .start = EVENTQ_1, + .flags = IORESOURCE_DMA, + }, }; +static struct davinci_spi_platform_data dm355_spi0_pdata = { + .version = SPI_VERSION_1, + .num_chipselect = 2, + .clk_internal = 1, + .cs_hold = 1, + .intr_level = 0, + .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */ + .c2tdelay = 0, + .t2cdelay = 0, +}; static struct platform_device dm355_spi0_device = { .name = "spi_davinci", .id = 0, .dev = { .dma_mask = &dm355_spi0_dma_mask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dm355_spi0_pdata, }, .num_resources = ARRAY_SIZE(dm355_spi0_resources), .resource = dm355_spi0_resources, @@ -564,13 +580,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static const s8 dma_chan_dm355_no_event[] = { - 12, 13, 24, 56, 57, - 58, 59, 60, 61, 62, - 63, - -1 -}; - static const s8 queue_tc_mapping[][2] = { /* {event queue no, TC no} */ @@ -594,7 +603,6 @@ static struct edma_soc_info dm355_edma_info[] = { .n_slot = 128, .n_tc = 2, .n_cc = 1, - .noevent = dma_chan_dm355_no_event, .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, }, @@ -665,6 +673,17 @@ static struct platform_device dm355_asp1_device = { .resource = dm355_asp1_resources, }; +static void dm355_ccdc_setup_pinmux(void) +{ + davinci_cfg_reg(DM355_VIN_PCLK); + davinci_cfg_reg(DM355_VIN_CAM_WEN); + davinci_cfg_reg(DM355_VIN_CAM_VD); + davinci_cfg_reg(DM355_VIN_CAM_HD); + davinci_cfg_reg(DM355_VIN_YIN_EN); + davinci_cfg_reg(DM355_VIN_CINL_EN); + davinci_cfg_reg(DM355_VIN_CINH_EN); +} + static struct resource dm355_vpss_resources[] = { { /* VPSS BL Base address */ @@ -701,6 +720,10 @@ static struct resource vpfe_resources[] = { .end = IRQ_VDINT1, .flags = IORESOURCE_IRQ, }, +}; + +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); +static struct resource dm355_ccdc_resource[] = { /* CCDC Base address */ { .flags = IORESOURCE_MEM, @@ -708,8 +731,18 @@ static struct resource vpfe_resources[] = { .end = 0x01c70600 + 0x1ff, }, }; +static struct platform_device dm355_ccdc_dev = { + .name = "dm355_ccdc", + .id = -1, + .num_resources = ARRAY_SIZE(dm355_ccdc_resource), + .resource = dm355_ccdc_resource, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = dm355_ccdc_setup_pinmux, + }, +}; -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); static struct platform_device vpfe_capture_dev = { .name = CAPTURE_DRV_NAME, .id = -1, @@ -857,20 +890,13 @@ static int __init dm355_init_devices(void) if (!cpu_is_davinci_dm355()) return 0; + /* Add ccdc clock aliases */ + clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL); + clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL); davinci_cfg_reg(DM355_INT_EDMA_CC); platform_device_register(&dm355_edma_device); platform_device_register(&dm355_vpss_device); - /* - * setup Mux configuration for vpfe input and register - * vpfe capture platform device - */ - davinci_cfg_reg(DM355_VIN_PCLK); - davinci_cfg_reg(DM355_VIN_CAM_WEN); - davinci_cfg_reg(DM355_VIN_CAM_VD); - davinci_cfg_reg(DM355_VIN_CAM_HD); - davinci_cfg_reg(DM355_VIN_YIN_EN); - davinci_cfg_reg(DM355_VIN_CINL_EN); - davinci_cfg_reg(DM355_VIN_CINH_EN); + platform_device_register(&dm355_ccdc_dev); platform_device_register(&vpfe_capture_dev); return 0; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index f53735cb922..0d6ee583f65 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/spi/spi.h> #include <asm/mach/map.h> @@ -32,6 +33,8 @@ #include <mach/common.h> #include <mach/asp.h> #include <mach/keyscan.h> +#include <mach/spi.h> + #include "clock.h" #include "mux.h" @@ -403,7 +406,7 @@ static struct clk mjcp_clk = { .lpsc = DM365_LPSC_MJCP, }; -static struct davinci_clk dm365_clks[] = { +static struct clk_lookup dm365_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll1", &pll1_clk), CLK(NULL, "pll1_aux", &pll1_aux_clk), @@ -455,7 +458,7 @@ static struct davinci_clk dm365_clks[] = { CLK(NULL, "timer3", &timer3_clk), CLK(NULL, "usb", &usb_clk), CLK("davinci_emac.1", NULL, &emac_clk), - CLK("voice_codec", NULL, &voicecodec_clk), + CLK("davinci_voicecodec", NULL, &voicecodec_clk), CLK("davinci-asp.0", NULL, &asp0_clk), CLK(NULL, "rto", &rto_clk), CLK(NULL, "mjcp", &mjcp_clk), @@ -606,9 +609,78 @@ INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false) EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false) EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false) +EVT_CFG(DM365, EVT2_VC_TX, 0, 1, 1, false) +EVT_CFG(DM365, EVT3_VC_RX, 1, 1, 1, false) #endif }; +static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32); + +static struct davinci_spi_platform_data dm365_spi0_pdata = { + .version = SPI_VERSION_1, + .num_chipselect = 2, + .clk_internal = 1, + .cs_hold = 1, + .intr_level = 0, + .poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */ + .c2tdelay = 0, + .t2cdelay = 0, +}; + +static struct resource dm365_spi0_resources[] = { + { + .start = 0x01c66000, + .end = 0x01c667ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM365_SPIINT0_0, + .flags = IORESOURCE_IRQ, + }, + { + .start = 17, + .flags = IORESOURCE_DMA, + }, + { + .start = 16, + .flags = IORESOURCE_DMA, + }, + { + .start = EVENTQ_3, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device dm365_spi0_device = { + .name = "spi_davinci", + .id = 0, + .dev = { + .dma_mask = &dm365_spi0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &dm365_spi0_pdata, + }, + .num_resources = ARRAY_SIZE(dm365_spi0_resources), + .resource = dm365_spi0_resources, +}; + +void __init dm365_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len) +{ + davinci_cfg_reg(DM365_SPI0_SCLK); + davinci_cfg_reg(DM365_SPI0_SDI); + davinci_cfg_reg(DM365_SPI0_SDO); + + /* not all slaves will be wired up */ + if (chipselect_mask & BIT(0)) + davinci_cfg_reg(DM365_SPI0_SDENA0); + if (chipselect_mask & BIT(1)) + davinci_cfg_reg(DM365_SPI0_SDENA1); + + spi_register_board_info(info, len); + + platform_device_register(&dm365_spi0_device); +} + static struct emac_platform_data dm365_emac_pdata = { .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, @@ -686,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_MMCINT] = 7, [IRQ_DM365_MMCINT1] = 7, [IRQ_DM365_PWMINT3] = 7, - [IRQ_DDRINT] = 4, [IRQ_AEMIFINT] = 2, [IRQ_DM365_SDIOINT1] = 2, [IRQ_TINT0_TINT12] = 7, @@ -754,7 +825,7 @@ static struct edma_soc_info dm365_edma_info[] = { .n_cc = 1, .queue_tc_mapping = dm365_queue_tc_mapping, .queue_priority_mapping = dm365_queue_priority_mapping, - .default_queue = EVENTQ_2, + .default_queue = EVENTQ_3, }, }; @@ -835,6 +906,31 @@ static struct platform_device dm365_asp_device = { .resource = dm365_asp_resources, }; +static struct resource dm365_vc_resources[] = { + { + .start = DAVINCI_DM365_VC_BASE, + .end = DAVINCI_DM365_VC_BASE + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = DAVINCI_DMA_VC_TX, + .end = DAVINCI_DMA_VC_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = DAVINCI_DMA_VC_RX, + .end = DAVINCI_DMA_VC_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device dm365_vc_device = { + .name = "davinci_voicecodec", + .id = -1, + .num_resources = ARRAY_SIZE(dm365_vc_resources), + .resource = dm365_vc_resources, +}; + static struct resource dm365_rtc_resources[] = { { .start = DM365_RTC_BASE, @@ -991,6 +1087,14 @@ void __init dm365_init_asp(struct snd_platform_data *pdata) platform_device_register(&dm365_asp_device); } +void __init dm365_init_vc(struct snd_platform_data *pdata) +{ + davinci_cfg_reg(DM365_EVT2_VC_TX); + davinci_cfg_reg(DM365_EVT3_VC_RX); + dm365_vc_device.dev.platform_data = pdata; + platform_device_register(&dm365_vc_device); +} + void __init dm365_init_ks(struct davinci_ks_platform_data *pdata) { dm365_ks_device.dev.platform_data = pdata; @@ -1008,6 +1112,97 @@ void __init dm365_init(void) davinci_common_init(&davinci_soc_info_dm365); } +static struct resource dm365_vpss_resources[] = { + { + /* VPSS ISP5 Base address */ + .name = "isp5", + .start = 0x01c70000, + .end = 0x01c70000 + 0xff, + .flags = IORESOURCE_MEM, + }, + { + /* VPSS CLK Base address */ + .name = "vpss", + .start = 0x01c70200, + .end = 0x01c70200 + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device dm365_vpss_device = { + .name = "vpss", + .id = -1, + .dev.platform_data = "dm365_vpss", + .num_resources = ARRAY_SIZE(dm365_vpss_resources), + .resource = dm365_vpss_resources, +}; + +static struct resource vpfe_resources[] = { + { + .start = IRQ_VDINT0, + .end = IRQ_VDINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_VDINT1, + .end = IRQ_VDINT1, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); +static struct platform_device vpfe_capture_dev = { + .name = CAPTURE_DRV_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(vpfe_resources), + .resource = vpfe_resources, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +static void dm365_isif_setup_pinmux(void) +{ + davinci_cfg_reg(DM365_VIN_CAM_WEN); + davinci_cfg_reg(DM365_VIN_CAM_VD); + davinci_cfg_reg(DM365_VIN_CAM_HD); + davinci_cfg_reg(DM365_VIN_YIN4_7_EN); + davinci_cfg_reg(DM365_VIN_YIN0_3_EN); +} + +static struct resource isif_resource[] = { + /* ISIF Base address */ + { + .start = 0x01c71000, + .end = 0x01c71000 + 0x1ff, + .flags = IORESOURCE_MEM, + }, + /* ISIF Linearization table 0 */ + { + .start = 0x1C7C000, + .end = 0x1C7C000 + 0x2ff, + .flags = IORESOURCE_MEM, + }, + /* ISIF Linearization table 1 */ + { + .start = 0x1C7C400, + .end = 0x1C7C400 + 0x2ff, + .flags = IORESOURCE_MEM, + }, +}; +static struct platform_device dm365_isif_dev = { + .name = "isif", + .id = -1, + .num_resources = ARRAY_SIZE(isif_resource), + .resource = isif_resource, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = dm365_isif_setup_pinmux, + }, +}; + static int __init dm365_init_devices(void) { if (!cpu_is_davinci_dm365()) @@ -1016,7 +1211,16 @@ static int __init dm365_init_devices(void) davinci_cfg_reg(DM365_INT_EDMA_CC); platform_device_register(&dm365_edma_device); platform_device_register(&dm365_emac_device); - + /* Add isif clock alias */ + clk_add_alias("master", dm365_isif_dev.name, "vpss_master", NULL); + platform_device_register(&dm365_vpss_device); + platform_device_register(&dm365_isif_dev); + platform_device_register(&vpfe_capture_dev); return 0; } postcore_initcall(dm365_init_devices); + +void dm365_set_vpfe_config(struct vpfe_config *cfg) +{ + vpfe_capture_dev.dev.platform_data = cfg; +} diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 2cd008156de..2f2ae8bc77b 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -277,7 +277,7 @@ static struct clk timer2_clk = { .usecount = 1, /* REVISIT: why cant' this be disabled? */ }; -struct davinci_clk dm644x_clks[] = { +struct clk_lookup dm644x_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll1", &pll1_clk), CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), @@ -479,15 +479,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static const s8 dma_chan_dm644x_no_event[] = { - 0, 1, 12, 13, 14, - 15, 25, 30, 31, 45, - 46, 47, 55, 56, 57, - 58, 59, 60, 61, 62, - 63, - -1 -}; - static const s8 queue_tc_mapping[][2] = { /* {event queue no, TC no} */ @@ -511,7 +502,6 @@ static struct edma_soc_info dm644x_edma_info[] = { .n_slot = 128, .n_tc = 2, .n_cc = 1, - .noevent = dma_chan_dm644x_no_event, .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, }, @@ -612,6 +602,11 @@ static struct resource vpfe_resources[] = { .end = IRQ_VDINT1, .flags = IORESOURCE_IRQ, }, +}; + +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); +static struct resource dm644x_ccdc_resource[] = { + /* CCDC Base address */ { .start = 0x01c70400, .end = 0x01c70400 + 0xff, @@ -619,7 +614,17 @@ static struct resource vpfe_resources[] = { }, }; -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32); +static struct platform_device dm644x_ccdc_dev = { + .name = "dm644x_ccdc", + .id = -1, + .num_resources = ARRAY_SIZE(dm644x_ccdc_resource), + .resource = dm644x_ccdc_resource, + .dev = { + .dma_mask = &vpfe_capture_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + static struct platform_device vpfe_capture_dev = { .name = CAPTURE_DRV_NAME, .id = -1, @@ -769,9 +774,13 @@ static int __init dm644x_init_devices(void) if (!cpu_is_davinci_dm644x()) return 0; + /* Add ccdc clock aliases */ + clk_add_alias("master", dm644x_ccdc_dev.name, "vpss_master", NULL); + clk_add_alias("slave", dm644x_ccdc_dev.name, "vpss_slave", NULL); platform_device_register(&dm644x_edma_device); platform_device_register(&dm644x_emac_device); platform_device_register(&dm644x_vpss_device); + platform_device_register(&dm644x_ccdc_dev); platform_device_register(&vpfe_capture_dev); return 0; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 829a44bcf79..893baf4ad37 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -42,7 +42,6 @@ /* * Device specific clocks */ -#define DM646X_REF_FREQ 27000000 #define DM646X_AUX_FREQ 24000000 static struct pll_data pll1_data = { @@ -57,7 +56,6 @@ static struct pll_data pll2_data = { static struct clk ref_clk = { .name = "ref_clk", - .rate = DM646X_REF_FREQ, }; static struct clk aux_clkin = { @@ -313,7 +311,7 @@ static struct clk vpif1_clk = { .flags = ALWAYS_ENABLED, }; -struct davinci_clk dm646x_clks[] = { +struct clk_lookup dm646x_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "aux", &aux_clkin), CLK(NULL, "pll1", &pll1_clk), @@ -513,14 +511,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ -static const s8 dma_chan_dm646x_no_event[] = { - 0, 1, 2, 3, 13, - 14, 15, 24, 25, 26, - 27, 30, 31, 54, 55, - 56, - -1 -}; - /* Four Transfer Controllers on DM646x */ static const s8 dm646x_queue_tc_mapping[][2] = { @@ -549,7 +539,6 @@ static struct edma_soc_info dm646x_edma_info[] = { .n_slot = 512, .n_tc = 4, .n_cc = 1, - .noevent = dma_chan_dm646x_no_event, .queue_tc_mapping = dm646x_queue_tc_mapping, .queue_priority_mapping = dm646x_queue_priority_mapping, }, @@ -925,6 +914,7 @@ void dm646x_setup_vpif(struct vpif_display_config *display_config, void __init dm646x_init(void) { + dm646x_board_setup_refclk(&ref_clk); davinci_common_init(&davinci_soc_info_dm646x); } diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 648fbb760ae..53137387aee 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> #include <mach/edma.h> @@ -226,11 +227,11 @@ struct edma { */ DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY); - /* The edma_noevent bit for each channel is clear unless - * it doesn't trigger DMA events on this platform. It uses a - * bit of SOC-specific initialization code. + /* The edma_unused bit for each channel is clear unless + * it is not being used on this platform. It uses a bit + * of SOC-specific initialization code. */ - DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH); + DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH); unsigned irq_res_start; unsigned irq_res_end; @@ -243,6 +244,7 @@ struct edma { }; static struct edma *edma_info[EDMA_MAX_CC]; +static int arch_num_cc; /* dummy param set used to (re)initialize parameter RAM slots */ static const struct edmacc_param dummy_paramset = { @@ -555,8 +557,27 @@ static int reserve_contiguous_slots(int ctlr, unsigned int id, return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1); } +static int prepare_unused_channel_list(struct device *dev, void *data) +{ + struct platform_device *pdev = to_platform_device(dev); + int i, ctlr; + + for (i = 0; i < pdev->num_resources; i++) { + if ((pdev->resource[i].flags & IORESOURCE_DMA) && + (int)pdev->resource[i].start >= 0) { + ctlr = EDMA_CTLR(pdev->resource[i].start); + clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start), + edma_info[ctlr]->edma_unused); + } + } + + return 0; +} + /*-----------------------------------------------------------------------*/ +static bool unused_chan_list_done; + /* Resource alloc/free: dma channels, parameter RAM slots */ /** @@ -594,7 +615,22 @@ int edma_alloc_channel(int channel, void *data, enum dma_event_q eventq_no) { - unsigned i, done, ctlr = 0; + unsigned i, done = 0, ctlr = 0; + int ret = 0; + + if (!unused_chan_list_done) { + /* + * Scan all the platform devices to find out the EDMA channels + * used and clear them in the unused list, making the rest + * available for ARM usage. + */ + ret = bus_for_each_dev(&platform_bus_type, NULL, NULL, + prepare_unused_channel_list); + if (ret < 0) + return ret; + + unused_chan_list_done = true; + } if (channel >= 0) { ctlr = EDMA_CTLR(channel); @@ -602,15 +638,15 @@ int edma_alloc_channel(int channel, } if (channel < 0) { - for (i = 0; i < EDMA_MAX_CC; i++) { + for (i = 0; i < arch_num_cc; i++) { channel = 0; for (;;) { channel = find_next_bit(edma_info[i]-> - edma_noevent, + edma_unused, edma_info[i]->num_channels, channel); if (channel == edma_info[i]->num_channels) - return -ENOMEM; + break; if (!test_and_set_bit(channel, edma_info[i]->edma_inuse)) { done = 1; @@ -622,6 +658,8 @@ int edma_alloc_channel(int channel, if (done) break; } + if (!done) + return -ENOMEM; } else if (channel >= edma_info[ctlr]->num_channels) { return -EINVAL; } else if (test_and_set_bit(channel, edma_info[ctlr]->edma_inuse)) { @@ -642,7 +680,7 @@ int edma_alloc_channel(int channel, map_dmach_queue(ctlr, channel, eventq_no); - return channel; + return EDMA_CTLR_CHAN(ctlr, channel); } EXPORT_SYMBOL(edma_alloc_channel); @@ -1219,7 +1257,7 @@ int edma_start(unsigned channel) unsigned int mask = (1 << (channel & 0x1f)); /* EDMA channels without event association */ - if (test_bit(channel, edma_info[ctlr]->edma_noevent)) { + if (test_bit(channel, edma_info[ctlr]->edma_unused)) { pr_debug("EDMA: ESR%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_ESR, j)); edma_shadow0_write_array(ctlr, SH_ESR, j, mask); @@ -1229,7 +1267,8 @@ int edma_start(unsigned channel) /* EDMA channel with event association */ pr_debug("EDMA: ER%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_ER, j)); - /* Clear any pending error */ + /* Clear any pending event or error */ + edma_write_array(ctlr, EDMA_ECR, j, mask); edma_write_array(ctlr, EDMA_EMCR, j, mask); /* Clear any SER */ edma_shadow0_write_array(ctlr, SH_SECR, j, mask); @@ -1344,7 +1383,6 @@ static int __init edma_probe(struct platform_device *pdev) const s8 (*queue_tc_mapping)[2]; int i, j, found = 0; int status = -1; - const s8 *noevent; int irq[EDMA_MAX_CC] = {0, 0}; int err_irq[EDMA_MAX_CC] = {0, 0}; struct resource *r[EDMA_MAX_CC] = {NULL}; @@ -1407,11 +1445,9 @@ static int __init edma_probe(struct platform_device *pdev) memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i), &dummy_paramset, PARM_SIZE); - noevent = info[j].noevent; - if (noevent) { - while (*noevent != -1) - set_bit(*noevent++, edma_info[j]->edma_noevent); - } + /* Mark all channels as unused */ + memset(edma_info[j]->edma_unused, 0xff, + sizeof(edma_info[j]->edma_unused)); sprintf(irq_name, "edma%d", j); irq[j] = platform_get_irq_byname(pdev, irq_name); @@ -1467,6 +1503,7 @@ static int __init edma_probe(struct platform_device *pdev) edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); edma_write_array(j, EDMA_QRAE, i, 0x0); } + arch_num_cc++; } if (tc_errs_handled) { diff --git a/arch/arm/mach-davinci/include/mach/cdce949.h b/arch/arm/mach-davinci/include/mach/cdce949.h new file mode 100644 index 00000000000..c73331fae34 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cdce949.h @@ -0,0 +1,19 @@ +/* + * TI CDCE949 off-chip clock synthesizer support + * + * 2009 (C) Texas Instruments, Inc. http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _MACH_DAVINCI_CDCE949_H +#define _MACH_DAVINCI_CDCE949_H + +#include <linux/clk.h> + +#include <mach/clock.h> + +int cdce_set_rate(struct clk *clk, unsigned long rate); + +#endif diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 6ca2c9a0a48..50a955f05ef 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -43,7 +43,7 @@ struct davinci_soc_info { void __iomem *jtag_id_base; struct davinci_id *ids; unsigned long ids_num; - struct davinci_clk *cpu_clks; + struct clk_lookup *cpu_clks; void __iomem **psc_bases; unsigned long psc_bases_num; void __iomem *pinmux_base; diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h index cbfc6a9c81b..74f088b0edf 100644 --- a/arch/arm/mach-davinci/include/mach/cpuidle.h +++ b/arch/arm/mach-davinci/include/mach/cpuidle.h @@ -12,6 +12,7 @@ struct davinci_cpuidle_config { u32 ddr2_pdown; + void __iomem *ddr2_ctlr_base; }; #endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 90704910d34..03acfd39042 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -3,7 +3,7 @@ * * Author: Mark A. Greer <mgreer@mvista.com> * - * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under + * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -13,15 +13,19 @@ #include <video/da8xx-fb.h> +#include <linux/platform_device.h> +#include <linux/davinci_emac.h> + #include <mach/serial.h> #include <mach/edma.h> #include <mach/i2c.h> -#include <mach/emac.h> #include <mach/asp.h> #include <mach/mmc.h> #include <mach/usb.h> +#include <mach/pm.h> -extern void __iomem *da8xx_syscfg_base; +extern void __iomem *da8xx_syscfg0_base; +extern void __iomem *da8xx_syscfg1_base; /* * The cp_intc interrupt controller for the da8xx isn't in the same @@ -34,13 +38,17 @@ extern void __iomem *da8xx_syscfg_base; #define DA8XX_CP_INTC_SIZE SZ_8K #define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K) -#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000) -#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x)) +#define DA8XX_SYSCFG0_BASE (IO_PHYS + 0x14000) +#define DA8XX_SYSCFG0_VIRT(x) (da8xx_syscfg0_base + (x)) #define DA8XX_JTAG_ID_REG 0x18 #define DA8XX_CFGCHIP0_REG 0x17c #define DA8XX_CFGCHIP2_REG 0x184 #define DA8XX_CFGCHIP3_REG 0x188 +#define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000) +#define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x)) +#define DA8XX_DEEPSLEEP_REG 0x8 + #define DA8XX_PSC0_BASE 0x01c10000 #define DA8XX_PLL0_BASE 0x01c11000 #define DA8XX_TIMER64P0_BASE 0x01c20000 @@ -48,11 +56,13 @@ extern void __iomem *da8xx_syscfg_base; #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 #define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA8XX_PLL1_BASE 0x01e1a000 #define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 #define DA8XX_DDR2_CTL_BASE 0xb0000000 +#define DA8XX_ARM_RAM_BASE 0xffff0000 #define PINMUX0 0x00 #define PINMUX1 0x04 @@ -90,6 +100,8 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); int da850_register_cpufreq(void); int da8xx_register_cpuidle(void); +void __iomem * __init da8xx_get_mem_ctlr(void); +int da850_register_pm(struct platform_device *pdev); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; @@ -134,6 +146,10 @@ extern const short da850_mmcsd0_pins[]; extern const short da850_nand_pins[]; extern const short da850_nor_pins[]; +#ifdef CONFIG_DAVINCI_MUX int da8xx_pinmux_setup(const short pins[]); +#else +static inline int da8xx_pinmux_setup(const short pins[]) { return 0; } +#endif #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index 17ab5236da6..3cd93a801d9 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -19,7 +19,7 @@ #include <linux/serial_reg.h> #define UART_SHIFT 2 - .macro addruart, rx + .macro addruart, rx, tmp mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0x01000000 @ physical base address diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index f1710a30e7b..3a37b5a6983 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -14,10 +14,11 @@ #define __ASM_ARCH_DM665_H #include <linux/platform_device.h> +#include <linux/davinci_emac.h> #include <mach/hardware.h> -#include <mach/emac.h> #include <mach/asp.h> #include <mach/keyscan.h> +#include <media/davinci/vpfe_capture.h> #define DM365_EMAC_BASE (0x01D07000) #define DM365_EMAC_CNTRL_OFFSET (0x0000) @@ -31,9 +32,17 @@ #define DM365_RTC_BASE (0x01C69000) +#define DAVINCI_DM365_VC_BASE (0x01D0C000) +#define DAVINCI_DMA_VC_TX 2 +#define DAVINCI_DMA_VC_RX 3 + void __init dm365_init(void); void __init dm365_init_asp(struct snd_platform_data *pdata); +void __init dm365_init_vc(struct snd_platform_data *pdata); void __init dm365_init_ks(struct davinci_ks_platform_data *pdata); void __init dm365_init_rtc(void); +void dm365_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); +void dm365_set_vpfe_config(struct vpfe_config *cfg); #endif /* __ASM_ARCH_DM365_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 44e8f0fae9e..1a8b09ccc3c 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -22,8 +22,8 @@ #ifndef __ASM_ARCH_DM644X_H #define __ASM_ARCH_DM644X_H +#include <linux/davinci_emac.h> #include <mach/hardware.h> -#include <mach/emac.h> #include <mach/asp.h> #include <media/davinci/vpfe_capture.h> diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index 8cec746ae9d..846da98b619 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -12,10 +12,11 @@ #define __ASM_ARCH_DM646X_H #include <mach/hardware.h> -#include <mach/emac.h> #include <mach/asp.h> #include <linux/i2c.h> #include <linux/videodev2.h> +#include <linux/clk.h> +#include <linux/davinci_emac.h> #define DM646X_EMAC_BASE (0x01C80000) #define DM646X_EMAC_CNTRL_OFFSET (0x0000) @@ -30,6 +31,7 @@ void __init dm646x_init(void); void __init dm646x_init_ide(void); void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); +void __init dm646x_board_setup_refclk(struct clk *clk); void dm646x_video_init(void); diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index eb8bfd7925e..ced3092af5b 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -280,8 +280,6 @@ struct edma_soc_info { unsigned n_cc; enum dma_event_q default_queue; - /* list of channels with no even trigger; terminated by "-1" */ - const s8 *noevent; const s8 (*queue_tc_mapping)[2]; const s8 (*queue_priority_mapping)[2]; }; diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h deleted file mode 100644 index beff4fb7c84..00000000000 --- a/arch/arm/mach-davinci/include/mach/emac.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * TI DaVinci EMAC platform support - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef _MACH_DAVINCI_EMAC_H -#define _MACH_DAVINCI_EMAC_H - -#include <linux/if_ether.h> -#include <linux/memory.h> - -struct emac_platform_data { - char mac_addr[ETH_ALEN]; - u32 ctrl_reg_offset; - u32 ctrl_mod_reg_offset; - u32 ctrl_ram_offset; - u32 mdio_reg_offset; - u32 ctrl_ram_size; - u32 phy_mask; - u32 mdio_max_freq; - u8 rmii_en; - u8 version; -}; - -enum { - EMAC_VERSION_1, /* DM644x */ - EMAC_VERSION_2, /* DM646x */ -}; - -void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context); -#endif diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index 41c89386e39..c45ba1f62a1 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -27,7 +27,7 @@ /* * I/O mapping */ -#define IO_PHYS 0x01c00000 +#define IO_PHYS 0x01c00000UL #define IO_OFFSET 0xfd000000 /* Virtual IO = 0xfec00000 */ #define IO_SIZE 0x00400000 #define IO_VIRT (IO_PHYS + IO_OFFSET) diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h index c248e9b7e82..2312d197dfb 100644 --- a/arch/arm/mach-davinci/include/mach/i2c.h +++ b/arch/arm/mach-davinci/include/mach/i2c.h @@ -1,5 +1,5 @@ /* - * DaVinci I2C controller platfrom_device info + * DaVinci I2C controller platform_device info * * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> * @@ -16,6 +16,8 @@ struct davinci_i2c_platform_data { unsigned int bus_freq; /* standard bus frequency (kHz) */ unsigned int bus_delay; /* post-transaction delay (usec) */ + unsigned int sda_pin; /* GPIO pin ID to use for SDA */ + unsigned int scl_pin; /* GPIO pin ID to use for SCL */ }; /* for board setup code */ diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 80309aed534..a91edfb8bee 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -31,6 +31,11 @@ #define PHYS_OFFSET DAVINCI_DDR_BASE #endif +#define DDR2_SDRCR_OFFSET 0xc +#define DDR2_SRPD_BIT BIT(23) +#define DDR2_MCLKSTOPEN_BIT BIT(30) +#define DDR2_LPMODEN_BIT BIT(31) + /* * Increase size of DMA-consistent memory region */ diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index b60c693985f..2a68c1d8a24 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -327,6 +327,8 @@ enum davinci_dm365_index { /* EDMA event muxing */ DM365_EVT2_ASP_TX, DM365_EVT3_ASP_RX, + DM365_EVT2_VC_TX, + DM365_EVT3_VC_RX, DM365_EVT26_MMC0_RX, }; @@ -899,6 +901,7 @@ enum davinci_da850_index { DA850_GPIO2_15, DA850_GPIO4_0, DA850_GPIO4_1, + DA850_RTC_ALARM, }; #ifdef CONFIG_DAVINCI_MUX diff --git a/arch/arm/mach-davinci/include/mach/pm.h b/arch/arm/mach-davinci/include/mach/pm.h new file mode 100644 index 00000000000..37b19bf35a8 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/pm.h @@ -0,0 +1,54 @@ +/* + * TI DaVinci platform support for power management. + * + * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef _MACH_DAVINCI_PM_H +#define _MACH_DAVINCI_PM_H + +/* + * Caution: Assembly code in sleep.S makes assumtion on the order + * of the members of this structure. + */ +struct davinci_pm_config { + void __iomem *ddr2_ctlr_base; + void __iomem *ddrpsc_reg_base; + int ddrpsc_num; + void __iomem *ddrpll_reg_base; + void __iomem *deepsleep_reg; + void __iomem *cpupll_reg_base; + /* + * Note on SLEEPCOUNT: + * The SLEEPCOUNT feature is mainly intended for cases in which + * the internal oscillator is used. The internal oscillator is + * fully disabled in deep sleep mode. When you exist deep sleep + * mode, the oscillator will be turned on and will generate very + * small oscillations which will not be detected by the deep sleep + * counter. Eventually those oscillations will grow to an amplitude + * large enough to start incrementing the deep sleep counter. + * In this case recommendation from hardware engineers is that the + * SLEEPCOUNT be set to 4096. This means that 4096 valid clock cycles + * must be detected before the clock is passed to the rest of the + * system. + * In the case that the internal oscillator is not used and the + * clock is generated externally, the SLEEPCOUNT value can be very + * small since the clock input is assumed to be stable before SoC + * is taken out of deepsleep mode. A value of 128 would be more than + * adequate. + */ + int sleepcount; +}; + +extern unsigned int davinci_cpu_suspend_sz; +extern void davinci_cpu_suspend(struct davinci_pm_config *); + +#endif diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 171173c1dba..651f6d8158f 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -180,8 +180,23 @@ #define DA8XX_LPSC1_CR_P3_SS 26 #define DA8XX_LPSC1_L3_CBA_RAM 31 +/* PSC register offsets */ +#define EPCPR 0x070 +#define PTCMD 0x120 +#define PTSTAT 0x128 +#define PDSTAT 0x200 +#define PDCTL1 0x304 +#define MDSTAT 0x800 +#define MDCTL 0xA00 + +#define MDSTAT_STATE_MASK 0x1f + +#ifndef __ASSEMBLER__ + extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, char enable); +#endif + #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h new file mode 100644 index 00000000000..910efbf099c --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/spi.h @@ -0,0 +1,44 @@ +/* + * Copyright 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_SPI_H +#define __ARCH_ARM_DAVINCI_SPI_H + +enum { + SPI_VERSION_1, /* For DM355/DM365/DM6467 */ + SPI_VERSION_2, /* For DA8xx */ +}; + +struct davinci_spi_platform_data { + u8 version; + u8 num_chipselect; + u8 wdelay; + u8 odd_parity; + u8 parity_enable; + u8 wait_enable; + u8 timer_disable; + u8 clk_internal; + u8 cs_hold; + u8 intr_level; + u8 poll_mode; + u8 use_dma; + u8 c2tdelay; + u8 t2cdelay; +}; + +#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h index 52827567841..9b885298f10 100644 --- a/arch/arm/mach-davinci/include/mach/timex.h +++ b/arch/arm/mach-davinci/include/mach/timex.h @@ -11,7 +11,12 @@ #ifndef __ASM_ARCH_TIMEX_H #define __ASM_ARCH_TIMEX_H -/* The source frequency for the timers is the 27MHz clock */ +/* + * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz, + * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/ + * linux/jiffies.h) are not used directly in code. Currently none of the + * code relevant to DaVinci platform depends on these values directly. + */ #define CLOCK_TICK_RATE 27000000 #endif /* __ASM_ARCH_TIMEX_H__ */ diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index 49912b48b1b..a1c0b6b99ed 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -24,7 +24,7 @@ void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type) if (BETWEEN(p, IO_PHYS, IO_SIZE)) return XLATE(p, IO_PHYS, IO_VIRT); - return __arm_ioremap(p, size, type); + return __arm_ioremap_caller(p, size, type, __builtin_return_address(0)); } EXPORT_SYMBOL(davinci_ioremap); diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c new file mode 100644 index 00000000000..fab953b43de --- /dev/null +++ b/arch/arm/mach-davinci/pm.c @@ -0,0 +1,158 @@ +/* + * DaVinci Power Management Routines + * + * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/pm.h> +#include <linux/suspend.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/spinlock.h> + +#include <asm/cacheflush.h> +#include <asm/delay.h> + +#include <mach/da8xx.h> +#include <mach/sram.h> +#include <mach/pm.h> + +#include "clock.h" + +#define DEEPSLEEP_SLEEPCOUNT_MASK 0xFFFF + +static void (*davinci_sram_suspend) (struct davinci_pm_config *); +static struct davinci_pm_config *pdata; + +static void davinci_sram_push(void *dest, void *src, unsigned int size) +{ + memcpy(dest, src, size); + flush_icache_range((unsigned long)dest, (unsigned long)(dest + size)); +} + +static void davinci_pm_suspend(void) +{ + unsigned val; + + if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) { + + /* Switch CPU PLL to bypass mode */ + val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN); + __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + + udelay(PLL_BYPASS_TIME); + + /* Powerdown CPU PLL */ + val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val |= PLLCTL_PLLPWRDN; + __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + } + + /* Configure sleep count in deep sleep register */ + val = __raw_readl(pdata->deepsleep_reg); + val &= ~DEEPSLEEP_SLEEPCOUNT_MASK, + val |= pdata->sleepcount; + __raw_writel(val, pdata->deepsleep_reg); + + /* System goes to sleep in this call */ + davinci_sram_suspend(pdata); + + if (pdata->cpupll_reg_base != pdata->ddrpll_reg_base) { + + /* put CPU PLL in reset */ + val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val &= ~PLLCTL_PLLRST; + __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + + /* put CPU PLL in power down */ + val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val &= ~PLLCTL_PLLPWRDN; + __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + + /* wait for CPU PLL reset */ + udelay(PLL_RESET_TIME); + + /* bring CPU PLL out of reset */ + val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val |= PLLCTL_PLLRST; + __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + + /* Wait for CPU PLL to lock */ + udelay(PLL_LOCK_TIME); + + /* Remove CPU PLL from bypass mode */ + val = __raw_readl(pdata->cpupll_reg_base + PLLCTL); + val &= ~PLLCTL_PLLENSRC; + val |= PLLCTL_PLLEN; + __raw_writel(val, pdata->cpupll_reg_base + PLLCTL); + } +} + +static int davinci_pm_enter(suspend_state_t state) +{ + int ret = 0; + + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + davinci_pm_suspend(); + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static struct platform_suspend_ops davinci_pm_ops = { + .enter = davinci_pm_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init davinci_pm_probe(struct platform_device *pdev) +{ + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "cannot get platform data\n"); + return -ENOENT; + } + + davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL); + if (!davinci_sram_suspend) { + dev_err(&pdev->dev, "cannot allocate SRAM memory\n"); + return -ENOMEM; + } + + davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend, + davinci_cpu_suspend_sz); + + suspend_set_ops(&davinci_pm_ops); + + return 0; +} + +static int __exit davinci_pm_remove(struct platform_device *pdev) +{ + sram_free(davinci_sram_suspend, davinci_cpu_suspend_sz); + return 0; +} + +static struct platform_driver davinci_pm_driver = { + .driver = { + .name = "pm-davinci", + .owner = THIS_MODULE, + }, + .remove = __exit_p(davinci_pm_remove), +}; + +static int __init davinci_pm_init(void) +{ + return platform_driver_probe(&davinci_pm_driver, davinci_pm_probe); +} +late_initcall(davinci_pm_init); diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 04a3cb72c5a..adf6b5c7f1e 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -25,17 +25,6 @@ #include <mach/cputype.h> #include <mach/psc.h> -/* PSC register offsets */ -#define EPCPR 0x070 -#define PTCMD 0x120 -#define PTSTAT 0x128 -#define PDSTAT 0x200 -#define PDCTL1 0x304 -#define MDSTAT 0x800 -#define MDCTL 0xA00 - -#define MDSTAT_STATE_MASK 0x1f - /* Return nonzero iff the domain's clock is active */ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) { diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S new file mode 100644 index 00000000000..fb5e72b532b --- /dev/null +++ b/arch/arm/mach-davinci/sleep.S @@ -0,0 +1,224 @@ +/* + * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* replicated define because linux/bitops.h cannot be included in assembly */ +#define BIT(nr) (1 << (nr)) + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/psc.h> +#include <mach/memory.h> + +#include "clock.h" + +/* Arbitrary, hardware currently does not update PHYRDY correctly */ +#define PHYRDY_CYCLES 0x1000 + +/* Assume 25 MHz speed for the cycle conversions since PLLs are bypassed */ +#define PLL_BYPASS_CYCLES (PLL_BYPASS_TIME * 25) +#define PLL_RESET_CYCLES (PLL_RESET_TIME * 25) +#define PLL_LOCK_CYCLES (PLL_LOCK_TIME * 25) + +#define DEEPSLEEP_SLEEPENABLE_BIT BIT(31) + + .text +/* + * Move DaVinci into deep sleep state + * + * Note: This code is copied to internal SRAM by PM code. When the DaVinci + * wakes up it continues execution at the point it went to sleep. + * Register Usage: + * r0: contains virtual base for DDR2 controller + * r1: contains virtual base for DDR2 Power and Sleep controller (PSC) + * r2: contains PSC number for DDR2 + * r3: contains virtual base DDR2 PLL controller + * r4: contains virtual address of the DEEPSLEEP register + */ +ENTRY(davinci_cpu_suspend) + stmfd sp!, {r0-r12, lr} @ save registers on stack + + ldr ip, CACHE_FLUSH + blx ip + + ldmia r0, {r0-r4} + + /* + * Switch DDR to self-refresh mode. + */ + + /* calculate SDRCR address */ + ldr ip, [r0, #DDR2_SDRCR_OFFSET] + bic ip, ip, #DDR2_SRPD_BIT + orr ip, ip, #DDR2_LPMODEN_BIT + str ip, [r0, #DDR2_SDRCR_OFFSET] + + ldr ip, [r0, #DDR2_SDRCR_OFFSET] + orr ip, ip, #DDR2_MCLKSTOPEN_BIT + str ip, [r0, #DDR2_SDRCR_OFFSET] + + mov ip, #PHYRDY_CYCLES +1: subs ip, ip, #0x1 + bne 1b + + /* Disable DDR2 LPSC */ + mov r7, r0 + mov r0, #0x2 + bl davinci_ddr_psc_config + mov r0, r7 + + /* Disable clock to DDR PHY */ + ldr ip, [r3, #PLLDIV1] + bic ip, ip, #PLLDIV_EN + str ip, [r3, #PLLDIV1] + + /* Put the DDR PLL in bypass and power down */ + ldr ip, [r3, #PLLCTL] + bic ip, ip, #PLLCTL_PLLENSRC + bic ip, ip, #PLLCTL_PLLEN + str ip, [r3, #PLLCTL] + + /* Wait for PLL to switch to bypass */ + mov ip, #PLL_BYPASS_CYCLES +2: subs ip, ip, #0x1 + bne 2b + + /* Power down the PLL */ + ldr ip, [r3, #PLLCTL] + orr ip, ip, #PLLCTL_PLLPWRDN + str ip, [r3, #PLLCTL] + + /* Go to deep sleep */ + ldr ip, [r4] + orr ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT + /* System goes to sleep beyond after this instruction */ + str ip, [r4] + + /* Wake up from sleep */ + + /* Clear sleep enable */ + ldr ip, [r4] + bic ip, ip, #DEEPSLEEP_SLEEPENABLE_BIT + str ip, [r4] + + /* initialize the DDR PLL controller */ + + /* Put PLL in reset */ + ldr ip, [r3, #PLLCTL] + bic ip, ip, #PLLCTL_PLLRST + str ip, [r3, #PLLCTL] + + /* Clear PLL power down */ + ldr ip, [r3, #PLLCTL] + bic ip, ip, #PLLCTL_PLLPWRDN + str ip, [r3, #PLLCTL] + + mov ip, #PLL_RESET_CYCLES +3: subs ip, ip, #0x1 + bne 3b + + /* Bring PLL out of reset */ + ldr ip, [r3, #PLLCTL] + orr ip, ip, #PLLCTL_PLLRST + str ip, [r3, #PLLCTL] + + /* Wait for PLL to lock (assume prediv = 1, 25MHz OSCIN) */ + mov ip, #PLL_LOCK_CYCLES +4: subs ip, ip, #0x1 + bne 4b + + /* Remove PLL from bypass mode */ + ldr ip, [r3, #PLLCTL] + bic ip, ip, #PLLCTL_PLLENSRC + orr ip, ip, #PLLCTL_PLLEN + str ip, [r3, #PLLCTL] + + /* Start 2x clock to DDR2 */ + + ldr ip, [r3, #PLLDIV1] + orr ip, ip, #PLLDIV_EN + str ip, [r3, #PLLDIV1] + + /* Enable VCLK */ + + /* Enable DDR2 LPSC */ + mov r7, r0 + mov r0, #0x3 + bl davinci_ddr_psc_config + mov r0, r7 + + /* clear MCLKSTOPEN */ + + ldr ip, [r0, #DDR2_SDRCR_OFFSET] + bic ip, ip, #DDR2_MCLKSTOPEN_BIT + str ip, [r0, #DDR2_SDRCR_OFFSET] + + ldr ip, [r0, #DDR2_SDRCR_OFFSET] + bic ip, ip, #DDR2_LPMODEN_BIT + str ip, [r0, #DDR2_SDRCR_OFFSET] + + /* Restore registers and return */ + ldmfd sp!, {r0-r12, pc} + +ENDPROC(davinci_cpu_suspend) + +/* + * Disables or Enables DDR2 LPSC + * Register Usage: + * r0: Enable or Disable LPSC r0 = 0x3 => Enable, r0 = 0x2 => Disable LPSC + * r1: contains virtual base for DDR2 Power and Sleep controller (PSC) + * r2: contains PSC number for DDR2 + */ +ENTRY(davinci_ddr_psc_config) + /* Set next state in mdctl for DDR2 */ + mov r6, #MDCTL + add r6, r6, r2, lsl #2 + ldr ip, [r1, r6] + bic ip, ip, #MDSTAT_STATE_MASK + orr ip, ip, r0 + str ip, [r1, r6] + + /* Enable the Power Domain Transition Command */ + ldr ip, [r1, #PTCMD] + orr ip, ip, #0x1 + str ip, [r1, #PTCMD] + + /* Check for Transition Complete (PTSTAT) */ +ptstat_done: + ldr ip, [r1, #PTSTAT] + and ip, ip, #0x1 + cmp ip, #0x0 + bne ptstat_done + + /* Check for DDR2 clock disable completion; */ + mov r6, #MDSTAT + add r6, r6, r2, lsl #2 +ddr2clk_stop_done: + ldr ip, [r1, r6] + and ip, ip, #MDSTAT_STATE_MASK + cmp ip, r0 + bne ddr2clk_stop_done + + mov pc, lr +ENDPROC(davinci_ddr_psc_config) + +CACHE_FLUSH: + .word arm926_flush_kern_cache_all + +ENTRY(davinci_cpu_suspend_sz) + .word . - davinci_cpu_suspend +ENDPROC(davinci_cpu_suspend_sz) diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 42d985beece..9e0b106b4f5 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -253,8 +253,6 @@ static void __init timer_init(void) irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; setup_irq(irq, &t->irqaction); } - - timer32_config(&timers[i]); } } @@ -331,6 +329,7 @@ static void __init davinci_timer_init(void) unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + int i; clockevent_id = soc_info->timer_info->clockevent_id; clocksource_id = soc_info->timer_info->clocksource_id; @@ -389,6 +388,9 @@ static void __init davinci_timer_init(void) clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); + + for (i=0; i< ARRAY_SIZE(timers); i++) + timer32_config(&timers[i]); } struct sys_timer davinci_timer = { |