diff options
Diffstat (limited to 'arch/arm/mach-clps711x')
26 files changed, 1644 insertions, 946 deletions
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index dbaae5f746a..f711498c180 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -1,6 +1,6 @@ if ARCH_CLPS711X -menu "CLPS711X/EP721X Implementations" +menu "CLPS711X/EP721X/EP731X Implementations" config ARCH_AUTCPU12 bool "AUTCPU12" @@ -10,18 +10,11 @@ config ARCH_AUTCPU12 config ARCH_CDB89712 bool "CDB89712" - select ISA help This is an evaluation board from Cirrus for the CS89712 processor. The board includes 2 serial ports, Ethernet, IRDA, and expansion headers. It comes with 16 MB SDRAM and 8 MB flash ROM. -config ARCH_CEIVA - bool "CEIVA" - help - Say Y here if you intend to run this kernel on the Ceiva/Polaroid - PhotoMax Digital Picture Frame. - config ARCH_CLEP7312 bool "CLEP7312" help @@ -29,10 +22,7 @@ config ARCH_CLEP7312 config ARCH_EDB7211 bool "EDB7211" - select ISA - select ARCH_DISCONTIGMEM_ENABLE - select ARCH_SPARSEMEM_ENABLE - select ARCH_SELECT_MEMORY_MODEL + select ARCH_HAS_HOLES_MEMORYMODEL help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. @@ -43,36 +33,6 @@ config ARCH_P720T Say Y here if you intend to run this kernel on the ARM Prospector 720T. -config ARCH_FORTUNET - bool "FORTUNET" - -# XXX Maybe these should indicate register compatibility -# instead of being mutually exclusive. -config ARCH_EP7211 - bool - depends on ARCH_EDB7211 - default y - -config ARCH_EP7212 - bool - depends on ARCH_P720T || ARCH_CEIVA - default y - -config EP72XX_ROM_BOOT - bool "EP72xx ROM boot" - depends on ARCH_EP7211 || ARCH_EP7212 - ---help--- - If you say Y here, your CLPS711x-based kernel will use the bootstrap - mode memory map instead of the normal memory map. - - Processors derived from the Cirrus CLPS-711X core support two boot - modes. Normal mode boots from the external memory device at CS0. - Bootstrap mode rearranges parts of the memory map, placing an - internal 128 byte bootstrap ROM at CS0. This option performs the - address map changes required to support booting in this mode. - - You almost surely want to say N here. - endmenu endif diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index 4a197315f0c..f04151efd96 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -4,17 +4,10 @@ # Object file lists. -obj-y := irq.o mm.o time.o -obj-m := -obj-n := -obj- := +obj-y := common.o devices.o -obj-$(CONFIG_ARCH_CEIVA) += ceiva.o -obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o -obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o -obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o -obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o -obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o -obj-$(CONFIG_ARCH_P720T) += p720t.o -leds-$(CONFIG_ARCH_P720T) += p720t-leds.o -obj-$(CONFIG_LEDS) += $(leds-y) +obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o +obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o +obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o +obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o +obj-$(CONFIG_ARCH_P720T) += board-p720t.o diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index d3d29339e14..eba77d35a61 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,7 +1,5 @@ # The standard locations for stuff on CLPS711x type processors - zreladdr-y := 0xc0028000 params_phys-y := 0xc0000100 # Should probably have some agreement on these... initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 initrd_phys-$(CONFIG_ARCH_CDB89712) := 0x00700000 - diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c deleted file mode 100644 index c13ca6c56ba..00000000000 --- a/arch/arm/mach-clps711x/autcpu12.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/autcpu12.c - * - * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> - -#include <asm/hardware.h> -#include <asm/sizes.h> -#include <asm/io.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/pgtable.h> -#include <asm/page.h> - -#include <asm/mach/map.h> -#include <asm/arch/autcpu12.h> - -#include "common.h" - -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * -*/ - -static struct map_desc autcpu12_io_desc[] __initdata = { - /* memory-mapped extra io and CS8900A Ethernet chip */ - /* ethernet chip */ - { - .virtual = AUTCPU12_VIRT_CS8900A, - .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE - } -}; - -void __init autcpu12_map_io(void) -{ - clps711x_map_io(); - iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc)); -} - -MACHINE_START(AUTCPU12, "autronix autcpu12") - /* Maintainer: Thomas Gleixner */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0020000, - .map_io = autcpu12_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, -MACHINE_END - diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c new file mode 100644 index 00000000000..d62ca16d539 --- /dev/null +++ b/arch/arm/mach-clps711x/board-autcpu12.c @@ -0,0 +1,276 @@ +/* + * linux/arch/arm/mach-clps711x/autcpu12.c + * + * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand-gpio.h> +#include <linux/platform_device.h> +#include <linux/basic_mmio_gpio.h> + +#include <mach/hardware.h> +#include <asm/sizes.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/pgtable.h> +#include <asm/page.h> + +#include <asm/mach/map.h> + +#include "common.h" +#include "devices.h" + +/* NOR flash */ +#define AUTCPU12_FLASH_BASE (CS0_PHYS_BASE) + +/* Board specific hardware definitions */ +#define AUTCPU12_CHAR_LCD_BASE (CS1_PHYS_BASE + 0x00000000) +#define AUTCPU12_CSAUX1_BASE (CS1_PHYS_BASE + 0x04000000) +#define AUTCPU12_CAN_BASE (CS1_PHYS_BASE + 0x08000000) +#define AUTCPU12_TOUCH_BASE (CS1_PHYS_BASE + 0x0a000000) +#define AUTCPU12_IO_BASE (CS1_PHYS_BASE + 0x0c000000) +#define AUTCPU12_LPT_BASE (CS1_PHYS_BASE + 0x0e000000) + +/* NVRAM */ +#define AUTCPU12_NVRAM_BASE (CS1_PHYS_BASE + 0x02000000) + +/* SmartMedia flash */ +#define AUTCPU12_SMC_BASE (CS1_PHYS_BASE + 0x06000000) +#define AUTCPU12_SMC_SEL_BASE (AUTCPU12_SMC_BASE + 0x10) + +/* Ethernet */ +#define AUTCPU12_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define AUTCPU12_CS8900_IRQ (IRQ_EINT3) + +/* NAND flash */ +#define AUTCPU12_MMGPIO_BASE (CLPS711X_NR_GPIO) +#define AUTCPU12_SMC_NCE (AUTCPU12_MMGPIO_BASE + 0) /* Bit 0 */ +#define AUTCPU12_SMC_RDY CLPS711X_GPIO(1, 2) +#define AUTCPU12_SMC_ALE CLPS711X_GPIO(1, 3) +#define AUTCPU12_SMC_CLE CLPS711X_GPIO(1, 4) + +/* LCD contrast digital potentiometer */ +#define AUTCPU12_DPOT_CS CLPS711X_GPIO(4, 0) +#define AUTCPU12_DPOT_CLK CLPS711X_GPIO(4, 1) +#define AUTCPU12_DPOT_UD CLPS711X_GPIO(4, 2) + +static struct resource autcpu12_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(AUTCPU12_CS8900_IRQ), +}; + +static struct resource autcpu12_nand_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_SMC_BASE, SZ_16), +}; + +static struct mtd_partition autcpu12_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_8M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static void __init autcpu12_adjust_parts(struct gpio_nand_platdata *pdata, + size_t sz) +{ + switch (sz) { + case SZ_16M: + case SZ_32M: + break; + case SZ_64M: + case SZ_128M: + pdata->parts[0].size = SZ_16M; + break; + default: + pr_warn("Unsupported SmartMedia device size %u\n", sz); + break; + } +} + +static struct gpio_nand_platdata autcpu12_nand_pdata __initdata = { + .gpio_rdy = AUTCPU12_SMC_RDY, + .gpio_nce = AUTCPU12_SMC_NCE, + .gpio_ale = AUTCPU12_SMC_ALE, + .gpio_cle = AUTCPU12_SMC_CLE, + .gpio_nwp = -1, + .chip_delay = 20, + .parts = autcpu12_nand_parts, + .num_parts = ARRAY_SIZE(autcpu12_nand_parts), + .adjust_parts = autcpu12_adjust_parts, +}; + +static struct platform_device autcpu12_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = autcpu12_nand_resource, + .num_resources = ARRAY_SIZE(autcpu12_nand_resource), + .dev = { + .platform_data = &autcpu12_nand_pdata, + }, +}; + +static struct resource autcpu12_mmgpio_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_SMC_SEL_BASE, SZ_1, "dat"), +}; + +static struct bgpio_pdata autcpu12_mmgpio_pdata __initdata = { + .base = AUTCPU12_MMGPIO_BASE, + .ngpio = 8, +}; + +static struct platform_device autcpu12_mmgpio_pdev __initdata = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = autcpu12_mmgpio_resource, + .num_resources = ARRAY_SIZE(autcpu12_mmgpio_resource), + .dev = { + .platform_data = &autcpu12_mmgpio_pdata, + }, +}; + +static const struct gpio autcpu12_gpios[] __initconst = { + { AUTCPU12_DPOT_CS, GPIOF_OUT_INIT_HIGH, "DPOT CS" }, + { AUTCPU12_DPOT_CLK, GPIOF_OUT_INIT_LOW, "DPOT CLK" }, + { AUTCPU12_DPOT_UD, GPIOF_OUT_INIT_LOW, "DPOT UD" }, +}; + +static struct mtd_partition autcpu12_flash_partitions[] = { + { + .name = "NOR.0", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data autcpu12_flash_pdata = { + .width = 4, + .parts = autcpu12_flash_partitions, + .nr_parts = ARRAY_SIZE(autcpu12_flash_partitions), +}; + +static struct resource autcpu12_flash_resources[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_FLASH_BASE, SZ_8M), +}; + +static struct platform_device autcpu12_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = autcpu12_flash_resources, + .num_resources = ARRAY_SIZE(autcpu12_flash_resources), + .dev = { + .platform_data = &autcpu12_flash_pdata, + }, +}; + +static struct resource autcpu12_nvram_resource[] __initdata = { + DEFINE_RES_MEM(AUTCPU12_NVRAM_BASE, 0), +}; + +static struct platdata_mtd_ram autcpu12_nvram_pdata = { + .bankwidth = 4, +}; + +static struct platform_device autcpu12_nvram_pdev __initdata = { + .name = "mtd-ram", + .id = 0, + .resource = autcpu12_nvram_resource, + .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), + .dev = { + .platform_data = &autcpu12_nvram_pdata, + }, +}; + +static void __init autcpu12_nvram_init(void) +{ + void __iomem *nvram; + unsigned int save[2]; + resource_size_t nvram_size = SZ_128K; + + /* + * Check for 32K/128K + * Read ofs 0K + * Read ofs 64K + * Write complement to ofs 64K + * Read and check result on ofs 0K + * Restore contents + */ + nvram = ioremap(autcpu12_nvram_resource[0].start, SZ_128K); + if (nvram) { + save[0] = readl(nvram + 0); + save[1] = readl(nvram + SZ_64K); + writel(~save[0], nvram + SZ_64K); + if (readl(nvram + 0) != save[0]) { + writel(save[0], nvram + 0); + nvram_size = SZ_32K; + } else + writel(save[1], nvram + SZ_64K); + iounmap(nvram); + + autcpu12_nvram_resource[0].end = + autcpu12_nvram_resource[0].start + nvram_size - 1; + platform_device_register(&autcpu12_nvram_pdev); + } else + pr_err("Failed to remap NVRAM resource\n"); +} + +static void __init autcpu12_init(void) +{ + clps711x_devices_init(); + platform_device_register(&autcpu12_flash_pdev); + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_simple("cs89x0", 0, autcpu12_cs8900_resource, + ARRAY_SIZE(autcpu12_cs8900_resource)); + platform_device_register(&autcpu12_mmgpio_pdev); + autcpu12_nvram_init(); +} + +static void __init autcpu12_init_late(void) +{ + gpio_request_array(autcpu12_gpios, ARRAY_SIZE(autcpu12_gpios)); + platform_device_register(&autcpu12_nand_pdev); +} + +MACHINE_START(AUTCPU12, "autronix autcpu12") + /* Maintainer: Thomas Gleixner */ + .atag_offset = 0x20000, + .map_io = clps711x_map_io, + .init_early = clps711x_init_early, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .init_machine = autcpu12_init, + .init_late = autcpu12_init_late, + .restart = clps711x_restart, +MACHINE_END + diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c new file mode 100644 index 00000000000..e261a47f2af --- /dev/null +++ b/arch/arm/mach-clps711x/board-cdb89712.c @@ -0,0 +1,148 @@ +/* + * linux/arch/arm/mach-clps711x/cdb89712.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/plat-ram.h> +#include <linux/mtd/partitions.h> + +#include <mach/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" +#include "devices.h" + +#define CDB89712_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define CDB89712_CS8900_IRQ (IRQ_EINT3) + +static struct resource cdb89712_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(CDB89712_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(CDB89712_CS8900_IRQ), +}; + +static struct mtd_partition cdb89712_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_flash_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_flash_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_flash_partitions), +}; + +static struct resource cdb89712_flash_resources[] __initdata = { + DEFINE_RES_MEM(CS0_PHYS_BASE, SZ_8M), +}; + +static struct platform_device cdb89712_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = cdb89712_flash_resources, + .num_resources = ARRAY_SIZE(cdb89712_flash_resources), + .dev = { + .platform_data = &cdb89712_flash_pdata, + }, +}; + +static struct mtd_partition cdb89712_bootrom_partitions[] __initdata = { + { + .name = "BootROM", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data cdb89712_bootrom_pdata __initdata = { + .width = 4, + .probe_type = "map_rom", + .parts = cdb89712_bootrom_partitions, + .nr_parts = ARRAY_SIZE(cdb89712_bootrom_partitions), +}; + +static struct resource cdb89712_bootrom_resources[] __initdata = { + DEFINE_RES_NAMED(CS7_PHYS_BASE, SZ_128, "BOOTROM", IORESOURCE_MEM | + IORESOURCE_CACHEABLE | IORESOURCE_READONLY), +}; + +static struct platform_device cdb89712_bootrom_pdev __initdata = { + .name = "physmap-flash", + .id = 1, + .resource = cdb89712_bootrom_resources, + .num_resources = ARRAY_SIZE(cdb89712_bootrom_resources), + .dev = { + .platform_data = &cdb89712_bootrom_pdata, + }, +}; + +static struct platdata_mtd_ram cdb89712_sram_pdata __initdata = { + .bankwidth = 4, +}; + +static struct resource cdb89712_sram_resources[] __initdata = { + DEFINE_RES_MEM(CLPS711X_SRAM_BASE, CLPS711X_SRAM_SIZE), +}; + +static struct platform_device cdb89712_sram_pdev __initdata = { + .name = "mtd-ram", + .id = 0, + .resource = cdb89712_sram_resources, + .num_resources = ARRAY_SIZE(cdb89712_sram_resources), + .dev = { + .platform_data = &cdb89712_sram_pdata, + }, +}; + +static void __init cdb89712_init(void) +{ + clps711x_devices_init(); + platform_device_register(&cdb89712_flash_pdev); + platform_device_register(&cdb89712_bootrom_pdev); + platform_device_register(&cdb89712_sram_pdev); + platform_device_register_simple("cs89x0", 0, cdb89712_cs8900_resource, + ARRAY_SIZE(cdb89712_cs8900_resource)); +} + +MACHINE_START(CDB89712, "Cirrus-CDB89712") + /* Maintainer: Ray Lehtiniemi */ + .atag_offset = 0x100, + .map_io = clps711x_map_io, + .init_early = clps711x_init_early, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .init_machine = cdb89712_init, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c index 09fb57e4521..94a7add88a3 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/board-clep7312.c @@ -18,6 +18,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/string.h> +#include <linux/memblock.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -26,24 +27,18 @@ #include "common.h" static void __init -fixup_clep7312(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) +fixup_clep7312(struct tag *tags, char **cmdline) { - mi->nr_banks=1; - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = 0x01000000; - mi->bank[0].node = 0; + memblock_add(0xc0000000, 0x01000000); } - MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") /* Maintainer: Nobody */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0000100, + .atag_offset = 0x0100, .fixup = fixup_clep7312, .map_io = clps711x_map_io, + .init_early = clps711x_init_early, .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, + .init_time = clps711x_timer_init, + .restart = clps711x_restart, MACHINE_END - diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c new file mode 100644 index 00000000000..f9828f89972 --- /dev/null +++ b/arch/arm/mach-clps711x/board-edb7211.c @@ -0,0 +1,187 @@ +/* + * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/memblock.h> +#include <linux/types.h> +#include <linux/i2c-gpio.h> +#include <linux/interrupt.h> +#include <linux/backlight.h> +#include <linux/platform_device.h> +#include <linux/memblock.h> + +#include <linux/mtd/physmap.h> +#include <linux/mtd/partitions.h> + +#include <asm/setup.h> +#include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <video/platform_lcd.h> + +#include <mach/hardware.h> + +#include "common.h" +#include "devices.h" + +#define VIDEORAM_SIZE SZ_128K + +#define EDB7211_LCD_DC_DC_EN CLPS711X_GPIO(3, 1) +#define EDB7211_LCDEN CLPS711X_GPIO(3, 2) +#define EDB7211_LCDBL CLPS711X_GPIO(3, 3) + +#define EDB7211_I2C_SDA CLPS711X_GPIO(3, 4) +#define EDB7211_I2C_SCL CLPS711X_GPIO(3, 5) + +#define EDB7211_FLASH0_BASE (CS0_PHYS_BASE) +#define EDB7211_FLASH1_BASE (CS1_PHYS_BASE) + +#define EDB7211_CS8900_BASE (CS2_PHYS_BASE + 0x300) +#define EDB7211_CS8900_IRQ (IRQ_EINT3) + +/* The extra 8 lines of the keyboard matrix */ +#define EDB7211_EXTKBD_BASE (CS3_PHYS_BASE) + +static struct i2c_gpio_platform_data edb7211_i2c_pdata __initdata = { + .sda_pin = EDB7211_I2C_SDA, + .scl_pin = EDB7211_I2C_SCL, + .scl_is_output_only = 1, +}; + +static struct resource edb7211_cs8900_resource[] __initdata = { + DEFINE_RES_MEM(EDB7211_CS8900_BASE, SZ_1K), + DEFINE_RES_IRQ(EDB7211_CS8900_IRQ), +}; + +static struct mtd_partition edb7211_flash_partitions[] __initdata = { + { + .name = "Flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data edb7211_flash_pdata __initdata = { + .width = 4, + .parts = edb7211_flash_partitions, + .nr_parts = ARRAY_SIZE(edb7211_flash_partitions), +}; + +static struct resource edb7211_flash_resources[] __initdata = { + DEFINE_RES_MEM(EDB7211_FLASH0_BASE, SZ_8M), + DEFINE_RES_MEM(EDB7211_FLASH1_BASE, SZ_8M), +}; + +static struct platform_device edb7211_flash_pdev __initdata = { + .name = "physmap-flash", + .id = 0, + .resource = edb7211_flash_resources, + .num_resources = ARRAY_SIZE(edb7211_flash_resources), + .dev = { + .platform_data = &edb7211_flash_pdata, + }, +}; + +static void edb7211_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + if (power) { + gpio_set_value(EDB7211_LCDEN, 1); + udelay(100); + gpio_set_value(EDB7211_LCD_DC_DC_EN, 1); + } else { + gpio_set_value(EDB7211_LCD_DC_DC_EN, 0); + udelay(100); + gpio_set_value(EDB7211_LCDEN, 0); + } +} + +static struct plat_lcd_data edb7211_lcd_power_pdata = { + .set_power = edb7211_lcd_power_set, +}; + +static void edb7211_lcd_backlight_set_intensity(int intensity) +{ + gpio_set_value(EDB7211_LCDBL, !!intensity); + clps_writel((clps_readl(PMPCON) & 0xf0ff) | (intensity << 8), PMPCON); +} + +static struct generic_bl_info edb7211_lcd_backlight_pdata = { + .name = "lcd-backlight.0", + .default_intensity = 0x01, + .max_intensity = 0x0f, + .set_bl_intensity = edb7211_lcd_backlight_set_intensity, +}; + +static struct gpio edb7211_gpios[] __initconst = { + { EDB7211_LCD_DC_DC_EN, GPIOF_OUT_INIT_LOW, "LCD DC-DC" }, + { EDB7211_LCDEN, GPIOF_OUT_INIT_LOW, "LCD POWER" }, + { EDB7211_LCDBL, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT" }, +}; + +/* Reserve screen memory region at the start of main system memory. */ +static void __init edb7211_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, VIDEORAM_SIZE); +} + +static void __init +fixup_edb7211(struct tag *tags, char **cmdline) +{ + /* + * Bank start addresses are not present in the information + * passed in from the boot loader. We could potentially + * detect them, but instead we hard-code them. + * + * Banks sizes _are_ present in the param block, but we're + * not using that information yet. + */ + memblock_add(0xc0000000, SZ_8M); + memblock_add(0xc1000000, SZ_8M); +} + +static void __init edb7211_init(void) +{ + clps711x_devices_init(); +} + +static void __init edb7211_init_late(void) +{ + gpio_request_array(edb7211_gpios, ARRAY_SIZE(edb7211_gpios)); + + platform_device_register(&edb7211_flash_pdev); + platform_device_register_data(&platform_bus, "platform-lcd", 0, + &edb7211_lcd_power_pdata, + sizeof(edb7211_lcd_power_pdata)); + platform_device_register_data(&platform_bus, "generic-bl", 0, + &edb7211_lcd_backlight_pdata, + sizeof(edb7211_lcd_backlight_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_simple("cs89x0", 0, edb7211_cs8900_resource, + ARRAY_SIZE(edb7211_cs8900_resource)); + platform_device_register_data(&platform_bus, "i2c-gpio", 0, + &edb7211_i2c_pdata, + sizeof(edb7211_i2c_pdata)); +} + +MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") + /* Maintainer: Jon McClintock */ + .atag_offset = VIDEORAM_SIZE + 0x100, + .fixup = fixup_edb7211, + .reserve = edb7211_reserve, + .map_io = clps711x_map_io, + .init_early = clps711x_init_early, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .init_machine = edb7211_init, + .init_late = edb7211_init_late, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c new file mode 100644 index 00000000000..0cf0e51e654 --- /dev/null +++ b/arch/arm/mach-clps711x/board-p720t.c @@ -0,0 +1,374 @@ +/* + * linux/arch/arm/mach-clps711x/p720t.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/slab.h> +#include <linux/leds.h> +#include <linux/sizes.h> +#include <linux/backlight.h> +#include <linux/basic_mmio_gpio.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand-gpio.h> + +#include <mach/hardware.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <video/platform_lcd.h> + +#include "common.h" +#include "devices.h" + +#define P720T_USERLED CLPS711X_GPIO(3, 0) +#define P720T_NAND_CLE CLPS711X_GPIO(4, 0) +#define P720T_NAND_ALE CLPS711X_GPIO(4, 1) +#define P720T_NAND_NCE CLPS711X_GPIO(4, 2) + +#define P720T_NAND_BASE (CLPS711X_SDRAM1_BASE) + +#define P720T_MMGPIO_BASE (CLPS711X_NR_GPIO) + +#define SYSPLD_PHYS_BASE IOMEM(CS1_PHYS_BASE) + +#define PLD_INT (SYSPLD_PHYS_BASE + 0x000000) +#define PLD_INT_MMGPIO_BASE (P720T_MMGPIO_BASE + 0) +#define PLD_INT_PENIRQ (PLD_INT_MMGPIO_BASE + 5) +#define PLD_INT_UCB_IRQ (PLD_INT_MMGPIO_BASE + 1) +#define PLD_INT_KBD_ATN (PLD_INT_MMGPIO_BASE + 0) /* EINT1 */ + +#define PLD_PWR (SYSPLD_PHYS_BASE + 0x000004) +#define PLD_PWR_MMGPIO_BASE (P720T_MMGPIO_BASE + 8) +#define PLD_PWR_EXT (PLD_PWR_MMGPIO_BASE + 5) +#define PLD_PWR_MODE (PLD_PWR_MMGPIO_BASE + 4) /* 1 = PWM, 0 = PFM */ +#define PLD_S4_ON (PLD_PWR_MMGPIO_BASE + 3) /* LCD bias voltage enable */ +#define PLD_S3_ON (PLD_PWR_MMGPIO_BASE + 2) /* LCD backlight enable */ +#define PLD_S2_ON (PLD_PWR_MMGPIO_BASE + 1) /* LCD 3V3 supply enable */ +#define PLD_S1_ON (PLD_PWR_MMGPIO_BASE + 0) /* LCD 3V supply enable */ + +#define PLD_KBD (SYSPLD_PHYS_BASE + 0x000008) +#define PLD_KBD_MMGPIO_BASE (P720T_MMGPIO_BASE + 16) +#define PLD_KBD_WAKE (PLD_KBD_MMGPIO_BASE + 1) +#define PLD_KBD_EN (PLD_KBD_MMGPIO_BASE + 0) + +#define PLD_SPI (SYSPLD_PHYS_BASE + 0x00000c) +#define PLD_SPI_MMGPIO_BASE (P720T_MMGPIO_BASE + 24) +#define PLD_SPI_EN (PLD_SPI_MMGPIO_BASE + 0) + +#define PLD_IO (SYSPLD_PHYS_BASE + 0x000010) +#define PLD_IO_MMGPIO_BASE (P720T_MMGPIO_BASE + 32) +#define PLD_IO_BOOTSEL (PLD_IO_MMGPIO_BASE + 6) /* Boot sel switch */ +#define PLD_IO_USER (PLD_IO_MMGPIO_BASE + 5) /* User defined switch */ +#define PLD_IO_LED3 (PLD_IO_MMGPIO_BASE + 4) +#define PLD_IO_LED2 (PLD_IO_MMGPIO_BASE + 3) +#define PLD_IO_LED1 (PLD_IO_MMGPIO_BASE + 2) +#define PLD_IO_LED0 (PLD_IO_MMGPIO_BASE + 1) +#define PLD_IO_LEDEN (PLD_IO_MMGPIO_BASE + 0) + +#define PLD_IRDA (SYSPLD_PHYS_BASE + 0x000014) +#define PLD_IRDA_MMGPIO_BASE (P720T_MMGPIO_BASE + 40) +#define PLD_IRDA_EN (PLD_IRDA_MMGPIO_BASE + 0) + +#define PLD_COM2 (SYSPLD_PHYS_BASE + 0x000018) +#define PLD_COM2_MMGPIO_BASE (P720T_MMGPIO_BASE + 48) +#define PLD_COM2_EN (PLD_COM2_MMGPIO_BASE + 0) + +#define PLD_COM1 (SYSPLD_PHYS_BASE + 0x00001c) +#define PLD_COM1_MMGPIO_BASE (P720T_MMGPIO_BASE + 56) +#define PLD_COM1_EN (PLD_COM1_MMGPIO_BASE + 0) + +#define PLD_AUD (SYSPLD_PHYS_BASE + 0x000020) +#define PLD_AUD_MMGPIO_BASE (P720T_MMGPIO_BASE + 64) +#define PLD_AUD_DIV1 (PLD_AUD_MMGPIO_BASE + 6) +#define PLD_AUD_DIV0 (PLD_AUD_MMGPIO_BASE + 5) +#define PLD_AUD_CLK_SEL1 (PLD_AUD_MMGPIO_BASE + 4) +#define PLD_AUD_CLK_SEL0 (PLD_AUD_MMGPIO_BASE + 3) +#define PLD_AUD_MIC_PWR (PLD_AUD_MMGPIO_BASE + 2) +#define PLD_AUD_MIC_GAIN (PLD_AUD_MMGPIO_BASE + 1) +#define PLD_AUD_CODEC_EN (PLD_AUD_MMGPIO_BASE + 0) + +#define PLD_CF (SYSPLD_PHYS_BASE + 0x000024) +#define PLD_CF_MMGPIO_BASE (P720T_MMGPIO_BASE + 72) +#define PLD_CF2_SLEEP (PLD_CF_MMGPIO_BASE + 5) +#define PLD_CF1_SLEEP (PLD_CF_MMGPIO_BASE + 4) +#define PLD_CF2_nPDREQ (PLD_CF_MMGPIO_BASE + 3) +#define PLD_CF1_nPDREQ (PLD_CF_MMGPIO_BASE + 2) +#define PLD_CF2_nIRQ (PLD_CF_MMGPIO_BASE + 1) +#define PLD_CF1_nIRQ (PLD_CF_MMGPIO_BASE + 0) + +#define PLD_SDC (SYSPLD_PHYS_BASE + 0x000028) +#define PLD_SDC_MMGPIO_BASE (P720T_MMGPIO_BASE + 80) +#define PLD_SDC_INT_EN (PLD_SDC_MMGPIO_BASE + 2) +#define PLD_SDC_WP (PLD_SDC_MMGPIO_BASE + 1) +#define PLD_SDC_CD (PLD_SDC_MMGPIO_BASE + 0) + +#define PLD_CODEC (SYSPLD_PHYS_BASE + 0x400000) +#define PLD_CODEC_MMGPIO_BASE (P720T_MMGPIO_BASE + 88) +#define PLD_CODEC_IRQ3 (PLD_CODEC_MMGPIO_BASE + 4) +#define PLD_CODEC_IRQ2 (PLD_CODEC_MMGPIO_BASE + 3) +#define PLD_CODEC_IRQ1 (PLD_CODEC_MMGPIO_BASE + 2) +#define PLD_CODEC_EN (PLD_CODEC_MMGPIO_BASE + 0) + +#define PLD_BRITE (SYSPLD_PHYS_BASE + 0x400004) +#define PLD_BRITE_MMGPIO_BASE (P720T_MMGPIO_BASE + 96) +#define PLD_BRITE_UP (PLD_BRITE_MMGPIO_BASE + 1) +#define PLD_BRITE_DN (PLD_BRITE_MMGPIO_BASE + 0) + +#define PLD_LCDEN (SYSPLD_PHYS_BASE + 0x400008) +#define PLD_LCDEN_MMGPIO_BASE (P720T_MMGPIO_BASE + 104) +#define PLD_LCDEN_EN (PLD_LCDEN_MMGPIO_BASE + 0) + +#define PLD_TCH (SYSPLD_PHYS_BASE + 0x400010) +#define PLD_TCH_MMGPIO_BASE (P720T_MMGPIO_BASE + 112) +#define PLD_TCH_PENIRQ (PLD_TCH_MMGPIO_BASE + 1) +#define PLD_TCH_EN (PLD_TCH_MMGPIO_BASE + 0) + +#define PLD_GPIO (SYSPLD_PHYS_BASE + 0x400014) +#define PLD_GPIO_MMGPIO_BASE (P720T_MMGPIO_BASE + 120) +#define PLD_GPIO2 (PLD_GPIO_MMGPIO_BASE + 2) +#define PLD_GPIO1 (PLD_GPIO_MMGPIO_BASE + 1) +#define PLD_GPIO0 (PLD_GPIO_MMGPIO_BASE + 0) + +static struct gpio p720t_gpios[] __initconst = { + { PLD_S1_ON, GPIOF_OUT_INIT_LOW, "PLD_S1_ON" }, + { PLD_S2_ON, GPIOF_OUT_INIT_LOW, "PLD_S2_ON" }, + { PLD_S3_ON, GPIOF_OUT_INIT_LOW, "PLD_S3_ON" }, + { PLD_S4_ON, GPIOF_OUT_INIT_LOW, "PLD_S4_ON" }, + { PLD_KBD_EN, GPIOF_OUT_INIT_LOW, "PLD_KBD_EN" }, + { PLD_SPI_EN, GPIOF_OUT_INIT_LOW, "PLD_SPI_EN" }, + { PLD_IO_USER, GPIOF_OUT_INIT_LOW, "PLD_IO_USER" }, + { PLD_IO_LED0, GPIOF_OUT_INIT_LOW, "PLD_IO_LED0" }, + { PLD_IO_LED1, GPIOF_OUT_INIT_LOW, "PLD_IO_LED1" }, + { PLD_IO_LED2, GPIOF_OUT_INIT_LOW, "PLD_IO_LED2" }, + { PLD_IO_LED3, GPIOF_OUT_INIT_LOW, "PLD_IO_LED3" }, + { PLD_IO_LEDEN, GPIOF_OUT_INIT_LOW, "PLD_IO_LEDEN" }, + { PLD_IRDA_EN, GPIOF_OUT_INIT_LOW, "PLD_IRDA_EN" }, + { PLD_COM1_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM1_EN" }, + { PLD_COM2_EN, GPIOF_OUT_INIT_HIGH, "PLD_COM2_EN" }, + { PLD_CODEC_EN, GPIOF_OUT_INIT_LOW, "PLD_CODEC_EN" }, + { PLD_LCDEN_EN, GPIOF_OUT_INIT_LOW, "PLD_LCDEN_EN" }, + { PLD_TCH_EN, GPIOF_OUT_INIT_LOW, "PLD_TCH_EN" }, + { P720T_USERLED,GPIOF_OUT_INIT_LOW, "USER_LED" }, +}; + +static struct resource p720t_mmgpio_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(0, 4, "dat"), +}; + +static struct bgpio_pdata p720t_mmgpio_pdata = { + .ngpio = 8, +}; + +static struct platform_device p720t_mmgpio __initdata = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = p720t_mmgpio_resource, + .num_resources = ARRAY_SIZE(p720t_mmgpio_resource), + .dev = { + .platform_data = &p720t_mmgpio_pdata, + }, +}; + +static void __init p720t_mmgpio_init(void __iomem *addrbase, int gpiobase) +{ + p720t_mmgpio_resource[0].start = (unsigned long)addrbase; + p720t_mmgpio_pdata.base = gpiobase; + + platform_device_register(&p720t_mmgpio); +} + +static struct { + void __iomem *addrbase; + int gpiobase; +} mmgpios[] __initconst = { + { PLD_INT, PLD_INT_MMGPIO_BASE }, + { PLD_PWR, PLD_PWR_MMGPIO_BASE }, + { PLD_KBD, PLD_KBD_MMGPIO_BASE }, + { PLD_SPI, PLD_SPI_MMGPIO_BASE }, + { PLD_IO, PLD_IO_MMGPIO_BASE }, + { PLD_IRDA, PLD_IRDA_MMGPIO_BASE }, + { PLD_COM2, PLD_COM2_MMGPIO_BASE }, + { PLD_COM1, PLD_COM1_MMGPIO_BASE }, + { PLD_AUD, PLD_AUD_MMGPIO_BASE }, + { PLD_CF, PLD_CF_MMGPIO_BASE }, + { PLD_SDC, PLD_SDC_MMGPIO_BASE }, + { PLD_CODEC, PLD_CODEC_MMGPIO_BASE }, + { PLD_BRITE, PLD_BRITE_MMGPIO_BASE }, + { PLD_LCDEN, PLD_LCDEN_MMGPIO_BASE }, + { PLD_TCH, PLD_TCH_MMGPIO_BASE }, + { PLD_GPIO, PLD_GPIO_MMGPIO_BASE }, +}; + +static struct resource p720t_nand_resource[] __initdata = { + DEFINE_RES_MEM(P720T_NAND_BASE, SZ_4), +}; + +static struct mtd_partition p720t_nand_parts[] __initdata = { + { + .name = "Flash partition 1", + .offset = 0, + .size = SZ_2M, + }, + { + .name = "Flash partition 2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct gpio_nand_platdata p720t_nand_pdata __initdata = { + .gpio_rdy = -1, + .gpio_nce = P720T_NAND_NCE, + .gpio_ale = P720T_NAND_ALE, + .gpio_cle = P720T_NAND_CLE, + .gpio_nwp = -1, + .chip_delay = 15, + .parts = p720t_nand_parts, + .num_parts = ARRAY_SIZE(p720t_nand_parts), +}; + +static struct platform_device p720t_nand_pdev __initdata = { + .name = "gpio-nand", + .id = -1, + .resource = p720t_nand_resource, + .num_resources = ARRAY_SIZE(p720t_nand_resource), + .dev = { + .platform_data = &p720t_nand_pdata, + }, +}; + +static void p720t_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + if (power) { + gpio_set_value(PLD_LCDEN_EN, 1); + gpio_set_value(PLD_S1_ON, 1); + gpio_set_value(PLD_S2_ON, 1); + gpio_set_value(PLD_S4_ON, 1); + } else { + gpio_set_value(PLD_S1_ON, 0); + gpio_set_value(PLD_S2_ON, 0); + gpio_set_value(PLD_S4_ON, 0); + gpio_set_value(PLD_LCDEN_EN, 0); + } +} + +static struct plat_lcd_data p720t_lcd_power_pdata = { + .set_power = p720t_lcd_power_set, +}; + +static void p720t_lcd_backlight_set_intensity(int intensity) +{ + gpio_set_value(PLD_S3_ON, intensity); +} + +static struct generic_bl_info p720t_lcd_backlight_pdata = { + .name = "lcd-backlight.0", + .default_intensity = 0x01, + .max_intensity = 0x01, + .set_bl_intensity = p720t_lcd_backlight_set_intensity, +}; + +static void __init +fixup_p720t(struct tag *tag, char **cmdline) +{ + /* + * Our bootloader doesn't setup any tags (yet). + */ + if (tag->hdr.tag != ATAG_CORE) { + tag->hdr.tag = ATAG_CORE; + tag->hdr.size = tag_size(tag_core); + tag->u.core.flags = 0; + tag->u.core.pagesize = PAGE_SIZE; + tag->u.core.rootdev = 0x0100; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_MEM; + tag->hdr.size = tag_size(tag_mem32); + tag->u.mem.size = 4096; + tag->u.mem.start = PHYS_OFFSET; + + tag = tag_next(tag); + tag->hdr.tag = ATAG_NONE; + tag->hdr.size = 0; + } +} + +static struct gpio_led p720t_gpio_leds[] = { + { + .name = "User LED", + .default_trigger = "heartbeat", + .gpio = P720T_USERLED, + }, +}; + +static struct gpio_led_platform_data p720t_gpio_led_pdata __initdata = { + .leds = p720t_gpio_leds, + .num_leds = ARRAY_SIZE(p720t_gpio_leds), +}; + +static void __init p720t_init(void) +{ + int i; + + clps711x_devices_init(); + + for (i = 0; i < ARRAY_SIZE(mmgpios); i++) + p720t_mmgpio_init(mmgpios[i].addrbase, mmgpios[i].gpiobase); + + platform_device_register(&p720t_nand_pdev); +} + +static void __init p720t_init_late(void) +{ + WARN_ON(gpio_request_array(p720t_gpios, ARRAY_SIZE(p720t_gpios))); + + platform_device_register_data(&platform_bus, "platform-lcd", 0, + &p720t_lcd_power_pdata, + sizeof(p720t_lcd_power_pdata)); + platform_device_register_data(&platform_bus, "generic-bl", 0, + &p720t_lcd_backlight_pdata, + sizeof(p720t_lcd_backlight_pdata)); + platform_device_register_simple("video-clps711x", 0, NULL, 0); + platform_device_register_data(&platform_bus, "leds-gpio", 0, + &p720t_gpio_led_pdata, + sizeof(p720t_gpio_led_pdata)); +} + +MACHINE_START(P720T, "ARM-Prospector720T") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .atag_offset = 0x100, + .fixup = fixup_p720t, + .map_io = clps711x_map_io, + .init_early = clps711x_init_early, + .init_irq = clps711x_init_irq, + .init_time = clps711x_timer_init, + .init_machine = p720t_init, + .init_late = p720t_init_late, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c deleted file mode 100644 index 831df007f6c..00000000000 --- a/arch/arm/mach-clps711x/cdb89712.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/cdb89712.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "common.h" - -/* - * Map the CS89712 Ethernet port. That should be moved to the - * ethernet driver, perhaps. - */ -static struct map_desc cdb89712_io_desc[] __initdata = { - { - .virtual = ETHER_BASE, - .pfn =__phys_to_pfn(ETHER_START), - .length = ETHER_SIZE, - .type = MT_DEVICE - } -}; - -static void __init cdb89712_map_io(void) -{ - clps711x_map_io(); - iotable_init(cdb89712_io_desc, ARRAY_SIZE(cdb89712_io_desc)); -} - -MACHINE_START(CDB89712, "Cirrus-CDB89712") - /* Maintainer: Ray Lehtiniemi */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0000100, - .map_io = cdb89712_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, -MACHINE_END diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c deleted file mode 100644 index e2b2c5ac8a8..00000000000 --- a/arch/arm/mach-clps711x/ceiva.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/arch-ceiva.c - * - * Copyright (C) 2002, Rob Scott <rscott@mtrob.fdns.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <linux/kernel.h> - -#include <asm/hardware.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/sizes.h> - -#include <asm/mach/map.h> - -#include "common.h" - -static struct map_desc ceiva_io_desc[] __initdata = { - /* SED1355 controlled video RAM & registers */ - { - .virtual = CEIVA_VIRT_SED1355, - .pfn = __phys_to_pfn(CEIVA_PHYS_SED1355), - .length = SZ_2M, - .type = MT_DEVICE - } -}; - - -static void __init ceiva_map_io(void) -{ - clps711x_map_io(); - iotable_init(ceiva_io_desc, ARRAY_SIZE(ceiva_io_desc)); -} - - -MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") - /* Maintainer: Rob Scott */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0000100, - .map_io = ceiva_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, -MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c new file mode 100644 index 00000000000..aee81fa46cc --- /dev/null +++ b/arch/arm/mach-clps711x/common.c @@ -0,0 +1,207 @@ +/* + * linux/arch/arm/mach-clps711x/core.c + * + * Core support for the CLPS711x-based machines. + * + * Copyright (C) 2001,2011 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/io.h> +#include <linux/init.h> +#include <linux/sizes.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/clk-provider.h> +#include <linux/sched_clock.h> + +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/system_misc.h> + +#include <mach/hardware.h> + +#include "common.h" + +static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, + *clk_tint, *clk_spi; + +/* + * This maps the generic CLPS711x registers + */ +static struct map_desc clps711x_io_desc[] __initdata = { + { + .virtual = (unsigned long)CLPS711X_VIRT_BASE, + .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), + .length = SZ_64K, + .type = MT_DEVICE + } +}; + +void __init clps711x_map_io(void) +{ + iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); +} + +void __init clps711x_init_irq(void) +{ + clps711x_intc_init(CLPS711X_PHYS_BASE, SZ_16K); +} + +static u64 notrace clps711x_sched_clock_read(void) +{ + return ~readw_relaxed(CLPS711X_VIRT_BASE + TC1D); +} + +static void clps711x_clockevent_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + disable_irq(IRQ_TC2OI); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + enable_irq(IRQ_TC2OI); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* Not supported */ + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +static struct clock_event_device clockevent_clps711x = { + .name = "clps711x-clockevent", + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC, + .set_mode = clps711x_clockevent_set_mode, +}; + +static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id) +{ + clockevent_clps711x.event_handler(&clockevent_clps711x); + + return IRQ_HANDLED; +} + +static struct irqaction clps711x_timer_irq = { + .name = "clps711x-timer", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = clps711x_timer_interrupt, +}; + +static void add_fixed_clk(struct clk *clk, const char *name, int rate) +{ + clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); + clk_register_clkdev(clk, name, NULL); +} + +void __init clps711x_timer_init(void) +{ + int osc, ext, pll, cpu, bus, timl, timh, uart, spi; + u32 tmp; + + osc = 3686400; + ext = 13000000; + + tmp = clps_readl(PLLR) >> 24; + if (tmp) + pll = (osc * tmp) / 2; + else + pll = 73728000; /* Default value */ + + tmp = clps_readl(SYSFLG2); + if (tmp & SYSFLG2_CKMODE) { + cpu = ext; + bus = cpu; + spi = 135400; + pll = 0; + } else { + cpu = pll; + if (cpu >= 36864000) + bus = cpu / 2; + else + bus = 36864000 / 2; + spi = cpu / 576; + } + + uart = bus / 10; + + if (tmp & SYSFLG2_CKMODE) { + tmp = clps_readl(SYSCON2); + if (tmp & SYSCON2_OSTB) + timh = ext / 26; + else + timh = 541440; + } else + timh = DIV_ROUND_CLOSEST(cpu, 144); + + timl = DIV_ROUND_CLOSEST(timh, 256); + + /* All clocks are fixed */ + add_fixed_clk(clk_pll, "pll", pll); + add_fixed_clk(clk_bus, "bus", bus); + add_fixed_clk(clk_uart, "uart", uart); + add_fixed_clk(clk_timerl, "timer_lf", timl); + add_fixed_clk(clk_timerh, "timer_hf", timh); + add_fixed_clk(clk_tint, "tint", 64); + add_fixed_clk(clk_spi, "spi", spi); + + pr_info("CPU frequency set at %i Hz.\n", cpu); + + /* Start Timer1 in free running mode (Low frequency) */ + tmp = clps_readl(SYSCON1) & ~(SYSCON1_TC1S | SYSCON1_TC1M); + clps_writel(tmp, SYSCON1); + + sched_clock_register(clps711x_sched_clock_read, 16, timl); + + clocksource_mmio_init(CLPS711X_VIRT_BASE + TC1D, + "clps711x_clocksource", timl, 300, 16, + clocksource_mmio_readw_down); + + /* Set Timer2 prescaler */ + clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D); + + /* Start Timer2 in prescale mode (High frequency)*/ + tmp = clps_readl(SYSCON1) | SYSCON1_TC2M | SYSCON1_TC2S; + clps_writel(tmp, SYSCON1); + + clockevents_config_and_register(&clockevent_clps711x, timh, 0, 0); + + setup_irq(IRQ_TC2OI, &clps711x_timer_irq); +} + +void clps711x_restart(enum reboot_mode mode, const char *cmd) +{ + soft_restart(0); +} + +static void clps711x_idle(void) +{ + clps_writel(1, HALT); + asm("mov r0, r0"); + asm("mov r0, r0"); +} + +void __init clps711x_init_early(void) +{ + arm_pm_idle = clps711x_idle; +} diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h index 2b8b801f1dc..7489139d5d6 100644 --- a/arch/arm/mach-clps711x/common.h +++ b/arch/arm/mach-clps711x/common.h @@ -4,8 +4,16 @@ * Common bits. */ -struct sys_timer; +#include <linux/reboot.h> + +#define CLPS711X_NR_GPIO (4 * 8 + 3) +#define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit)) extern void clps711x_map_io(void); extern void clps711x_init_irq(void); -extern struct sys_timer clps711x_timer; +extern void clps711x_timer_init(void); +extern void clps711x_restart(enum reboot_mode mode, const char *cmd); +extern void clps711x_init_early(void); + +/* drivers/irqchip/irq-clps711x.c */ +void clps711x_intc_init(phys_addr_t, resource_size_t); diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c new file mode 100644 index 00000000000..2001488a5ef --- /dev/null +++ b/arch/arm/mach-clps711x/devices.c @@ -0,0 +1,89 @@ +/* + * CLPS711X common devices definitions + * + * Author: Alexander Shiyan <shc_work@mail.ru>, 2013 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/platform_device.h> +#include <linux/sizes.h> + +#include <mach/hardware.h> + +static const phys_addr_t clps711x_gpios[][2] __initconst = { + { PADR, PADDR }, + { PBDR, PBDDR }, + { PCDR, PCDDR }, + { PDDR, PDDDR }, + { PEDR, PEDDR }, +}; + +static void __init clps711x_add_gpio(void) +{ + unsigned i; + struct resource gpio_res[2]; + + memset(gpio_res, 0, sizeof(gpio_res)); + + gpio_res[0].flags = IORESOURCE_MEM; + gpio_res[1].flags = IORESOURCE_MEM; + + for (i = 0; i < ARRAY_SIZE(clps711x_gpios); i++) { + gpio_res[0].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][0]; + gpio_res[0].end = gpio_res[0].start; + gpio_res[1].start = CLPS711X_PHYS_BASE + clps711x_gpios[i][1]; + gpio_res[1].end = gpio_res[1].start; + + platform_device_register_simple("clps711x-gpio", i, + gpio_res, ARRAY_SIZE(gpio_res)); + } +} + +const struct resource clps711x_syscon_res[] __initconst = { + /* SYSCON1, SYSFLG1 */ + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON1, SZ_128), + /* SYSCON2, SYSFLG2 */ + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON2, SZ_128), + /* SYSCON3 */ + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + SYSCON3, SZ_64), +}; + +static void __init clps711x_add_syscon(void) +{ + unsigned i; + + for (i = 0; i < ARRAY_SIZE(clps711x_syscon_res); i++) + platform_device_register_simple("syscon", i + 1, + &clps711x_syscon_res[i], 1); +} + +static const struct resource clps711x_uart1_res[] __initconst = { + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR1, SZ_128), + DEFINE_RES_IRQ(IRQ_UTXINT1), + DEFINE_RES_IRQ(IRQ_URXINT1), +}; + +static const struct resource clps711x_uart2_res[] __initconst = { + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + UARTDR2, SZ_128), + DEFINE_RES_IRQ(IRQ_UTXINT2), + DEFINE_RES_IRQ(IRQ_URXINT2), +}; + +static void __init clps711x_add_uart(void) +{ + platform_device_register_simple("clps711x-uart", 0, clps711x_uart1_res, + ARRAY_SIZE(clps711x_uart1_res)); + platform_device_register_simple("clps711x-uart", 1, clps711x_uart2_res, + ARRAY_SIZE(clps711x_uart2_res)); +}; + +void __init clps711x_devices_init(void) +{ + clps711x_add_gpio(); + clps711x_add_syscon(); + clps711x_add_uart(); +} diff --git a/arch/arm/mach-clps711x/devices.h b/arch/arm/mach-clps711x/devices.h new file mode 100644 index 00000000000..a5efc1744b8 --- /dev/null +++ b/arch/arm/mach-clps711x/devices.h @@ -0,0 +1,12 @@ +/* + * CLPS711X common devices definitions + * + * Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +void clps711x_devices_init(void); diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c deleted file mode 100644 index dc81cc68595..00000000000 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/arch-edb7211.c - * - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "common.h" - -extern void edb7211_map_io(void); - -static void __init -fixup_edb7211(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) -{ - /* - * Bank start addresses are not present in the information - * passed in from the boot loader. We could potentially - * detect them, but instead we hard-code them. - * - * Banks sizes _are_ present in the param block, but we're - * not using that information yet. - */ - mi->bank[0].start = 0xc0000000; - mi->bank[0].size = 8*1024*1024; - mi->bank[0].node = 0; - mi->bank[1].start = 0xc1000000; - mi->bank[1].size = 8*1024*1024; - mi->bank[1].node = 1; - mi->nr_banks = 2; -} - -MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") - /* Maintainer: Jon McClintock */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ - .fixup = fixup_edb7211, - .map_io = edb7211_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, -MACHINE_END diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c deleted file mode 100644 index 0d52e085125..00000000000 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/mm.c - * - * Extra MM routines for the EDB7211 board - * - * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/hardware.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/sizes.h> - -#include <asm/mach/map.h> - -extern void clps711x_map_io(void); - -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * - * Here is a physical memory map (to be fleshed out later): - * - * Physical Address Size Description - * ----------------- ----- --------------------------------- - * c0000000-c001ffff 128KB reserved for video RAM [1] - * c0020000-c0023fff 16KB parameters (see Documentation/arm/Setup) - * c0024000-c0027fff 16KB swapper_pg_dir (task 0 page directory) - * c0028000-... kernel image (TEXTADDR) - * - * [1] Unused pages should be given back to the VM; they are not yet. - * The parameter block should also be released (not sure if this - * happens). - */ -static struct map_desc edb7211_io_desc[] __initdata = { - { /* memory-mapped extra keyboard row */ - .virtual = EP7211_VIRT_EXTKBD, - .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), - .length = SZ_1M, - .type = MT_DEVICE, - }, { /* and CS8900A Ethernet chip */ - .virtual = EP7211_VIRT_CS8900A, - .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), - .length = SZ_1M, - .type = MT_DEVICE, - }, { /* flash banks */ - .virtual = EP7211_VIRT_FLASH1, - .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), - .length = SZ_8M, - .type = MT_DEVICE, - }, { - .virtual = EP7211_VIRT_FLASH2, - .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), - .length = SZ_8M, - .type = MT_DEVICE, - } -}; - -void __init edb7211_map_io(void) -{ - clps711x_map_io(); - iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc)); -} - diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c deleted file mode 100644 index 3792ab4f099..00000000000 --- a/arch/arm/mach-clps711x/fortunet.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/fortunet.c - * - * Derived from linux/arch/arm/mach-integrator/arch.c - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/types.h> -#include <linux/init.h> -#include <linux/initrd.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> - -#include <asm/memory.h> - -#include "common.h" - -struct meminfo memmap = { - .nr_banks = 1, - .bank = { - { - .start = 0xC0000000, - .size = 0x01000000, - .node = 0 - }, - }, -}; - -typedef struct tag_IMAGE_PARAMS -{ - int ramdisk_ok; - int ramdisk_address; - int ramdisk_size; - int ram_size; - int extra_param_type; - int extra_param_ptr; - int command_line; -} IMAGE_PARAMS; - -#define IMAGE_PARAMS_PHYS 0xC01F0000 - -static void __init -fortunet_fixup(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) -{ - IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS); - *cmdline = phys_to_virt(ip->command_line); -#ifdef CONFIG_BLK_DEV_INITRD - if(ip->ramdisk_ok) - { - initrd_start = __phys_to_virt(ip->ramdisk_address); - initrd_end = initrd_start + ip->ramdisk_size; - } -#endif - memmap.bank[0].size = ip->ram_size; - *mi = memmap; -} - -MACHINE_START(FORTUNET, "ARM-FortuNet") - /* Maintainer: FortuNet Inc. */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, - .boot_params = 0x00000000, - .fixup = fortunet_fixup, - .map_io = clps711x_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, -MACHINE_END diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h new file mode 100644 index 00000000000..eb052a11aa9 --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -0,0 +1,204 @@ +/* + * This file contains the hardware definitions of the Cirrus Logic + * ARM7 CLPS711X internal registers. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_CLPS711X_H +#define __MACH_CLPS711X_H + +#include <linux/mfd/syscon/clps711x.h> + +#define CLPS711X_PHYS_BASE (0x80000000) + +#define PADR (0x0000) +#define PBDR (0x0001) +#define PCDR (0x0002) +#define PDDR (0x0003) +#define PADDR (0x0040) +#define PBDDR (0x0041) +#define PCDDR (0x0042) +#define PDDDR (0x0043) +#define PEDR (0x0083) +#define PEDDR (0x00c3) +#define SYSCON1 (0x0100) +#define SYSFLG1 (0x0140) +#define MEMCFG1 (0x0180) +#define MEMCFG2 (0x01c0) +#define DRFPR (0x0200) +#define LCDCON (0x02c0) +#define TC1D (0x0300) +#define TC2D (0x0340) +#define RTCDR (0x0380) +#define RTCMR (0x03c0) +#define PMPCON (0x0400) +#define CODR (0x0440) +#define UARTDR1 (0x0480) +#define UBRLCR1 (0x04c0) +#define SYNCIO (0x0500) +#define PALLSW (0x0540) +#define PALMSW (0x0580) +#define STFCLR (0x05c0) +#define HALT (0x0800) +#define STDBY (0x0840) + +#define FBADDR (0x1000) +#define SYSCON2 (0x1100) +#define SYSFLG2 (0x1140) +#define UARTDR2 (0x1480) +#define UBRLCR2 (0x14c0) +#define SS2DR (0x1500) +#define SS2POP (0x16c0) + +#define DAIR (0x2000) +#define DAIDR0 (0x2040) +#define DAIDR1 (0x2080) +#define DAIDR2 (0x20c0) +#define DAISR (0x2100) +#define SYSCON3 (0x2200) +#define LEDFLSH (0x22c0) +#define SDCONF (0x2300) +#define SDRFPR (0x2340) +#define UNIQID (0x2440) +#define DAI64FS (0x2600) +#define PLLW (0x2610) +#define PLLR (0xa5a8) +#define RANDID0 (0x2700) +#define RANDID1 (0x2704) +#define RANDID2 (0x2708) +#define RANDID3 (0x270c) + +#define LCDCON_GSEN (1 << 30) +#define LCDCON_GSMD (1 << 31) + +/* common bits: UARTDR1 / UARTDR2 */ +#define UARTDR_FRMERR (1 << 8) +#define UARTDR_PARERR (1 << 9) +#define UARTDR_OVERR (1 << 10) + +/* common bits: UBRLCR1 / UBRLCR2 */ +#define UBRLCR_BAUD_MASK ((1 << 12) - 1) +#define UBRLCR_BREAK (1 << 12) +#define UBRLCR_PRTEN (1 << 13) +#define UBRLCR_EVENPRT (1 << 14) +#define UBRLCR_XSTOP (1 << 15) +#define UBRLCR_FIFOEN (1 << 16) +#define UBRLCR_WRDLEN5 (0 << 17) +#define UBRLCR_WRDLEN6 (1 << 17) +#define UBRLCR_WRDLEN7 (2 << 17) +#define UBRLCR_WRDLEN8 (3 << 17) +#define UBRLCR_WRDLEN_MASK (3 << 17) + +#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8) +#define SYNCIO_SMCKEN (1 << 13) +#define SYNCIO_TXFRMEN (1 << 14) + +#define DAIR_RESERVED (0x0404) +#define DAIR_DAIEN (1 << 16) +#define DAIR_ECS (1 << 17) +#define DAIR_LCTM (1 << 19) +#define DAIR_LCRM (1 << 20) +#define DAIR_RCTM (1 << 21) +#define DAIR_RCRM (1 << 22) +#define DAIR_LBM (1 << 23) + +#define DAIDR2_FIFOEN (1 << 15) +#define DAIDR2_FIFOLEFT (0x0d << 16) +#define DAIDR2_FIFORIGHT (0x11 << 16) + +#define DAISR_RCTS (1 << 0) +#define DAISR_RCRS (1 << 1) +#define DAISR_LCTS (1 << 2) +#define DAISR_LCRS (1 << 3) +#define DAISR_RCTU (1 << 4) +#define DAISR_RCRO (1 << 5) +#define DAISR_LCTU (1 << 6) +#define DAISR_LCRO (1 << 7) +#define DAISR_RCNF (1 << 8) +#define DAISR_RCNE (1 << 9) +#define DAISR_LCNF (1 << 10) +#define DAISR_LCNE (1 << 11) +#define DAISR_FIFO (1 << 12) + +#define DAI64FS_I2SF64 (1 << 0) +#define DAI64FS_AUDIOCLKEN (1 << 1) +#define DAI64FS_AUDIOCLKSRC (1 << 2) +#define DAI64FS_MCLK256EN (1 << 3) +#define DAI64FS_LOOPBACK (1 << 5) + +#define SDCONF_ACTIVE (1 << 10) +#define SDCONF_CLKCTL (1 << 9) +#define SDCONF_WIDTH_4 (0 << 7) +#define SDCONF_WIDTH_8 (1 << 7) +#define SDCONF_WIDTH_16 (2 << 7) +#define SDCONF_WIDTH_32 (3 << 7) +#define SDCONF_SIZE_16 (0 << 5) +#define SDCONF_SIZE_64 (1 << 5) +#define SDCONF_SIZE_128 (2 << 5) +#define SDCONF_SIZE_256 (3 << 5) +#define SDCONF_CASLAT_2 (2) +#define SDCONF_CASLAT_3 (3) + +#define MEMCFG_BUS_WIDTH_32 (1) +#define MEMCFG_BUS_WIDTH_16 (0) +#define MEMCFG_BUS_WIDTH_8 (3) + +#define MEMCFG_SQAEN (1 << 6) +#define MEMCFG_CLKENB (1 << 7) + +#define MEMCFG_WAITSTATE_8_3 (0 << 2) +#define MEMCFG_WAITSTATE_7_3 (1 << 2) +#define MEMCFG_WAITSTATE_6_3 (2 << 2) +#define MEMCFG_WAITSTATE_5_3 (3 << 2) +#define MEMCFG_WAITSTATE_4_2 (4 << 2) +#define MEMCFG_WAITSTATE_3_2 (5 << 2) +#define MEMCFG_WAITSTATE_2_2 (6 << 2) +#define MEMCFG_WAITSTATE_1_2 (7 << 2) +#define MEMCFG_WAITSTATE_8_1 (8 << 2) +#define MEMCFG_WAITSTATE_7_1 (9 << 2) +#define MEMCFG_WAITSTATE_6_1 (10 << 2) +#define MEMCFG_WAITSTATE_5_1 (11 << 2) +#define MEMCFG_WAITSTATE_4_0 (12 << 2) +#define MEMCFG_WAITSTATE_3_0 (13 << 2) +#define MEMCFG_WAITSTATE_2_0 (14 << 2) +#define MEMCFG_WAITSTATE_1_0 (15 << 2) + +/* INTSR1 Interrupts */ +#define IRQ_CSINT (4) +#define IRQ_EINT1 (5) +#define IRQ_EINT2 (6) +#define IRQ_EINT3 (7) +#define IRQ_TC1OI (8) +#define IRQ_TC2OI (9) +#define IRQ_RTCMI (10) +#define IRQ_TINT (11) +#define IRQ_UTXINT1 (12) +#define IRQ_URXINT1 (13) +#define IRQ_UMSINT (14) +#define IRQ_SSEOTI (15) + +/* INTSR2 Interrupts */ +#define IRQ_KBDINT (16 + 0) +#define IRQ_SS2RX (16 + 1) +#define IRQ_SS2TX (16 + 2) +#define IRQ_UTXINT2 (16 + 12) +#define IRQ_URXINT2 (16 + 13) + +/* INTSR3 Interrupts */ +#define IRQ_DAIINT (32 + 0) + +#endif /* __MACH_CLPS711X_H */ diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S new file mode 100644 index 00000000000..cb3684f8dae --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -0,0 +1,38 @@ +/* arch/arm/mach-clps711x/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <mach/hardware.h> + + .macro addruart, rp, rv, tmp +#ifndef CONFIG_DEBUG_CLPS711X_UART2 + mov \rp, #0x0000 @ UART1 +#else + mov \rp, #0x1000 @ UART2 +#endif + orr \rv, \rp, #CLPS711X_VIRT_BASE + orr \rp, \rp, #CLPS711X_PHYS_BASE + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x0480] @ UARTDR + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx + tst \rd, #1 << 11 @ UBUSYx + bne 1001b + .endm + diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h new file mode 100644 index 00000000000..5d6afda1c0e --- /dev/null +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -0,0 +1,56 @@ +/* + * arch/arm/mach-clps711x/include/mach/hardware.h + * + * This file contains the hardware definitions of the Prospector P720T. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_HARDWARE_H +#define __MACH_HARDWARE_H + +#include <mach/clps711x.h> + +#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \ + (((x) >> 2) & 0x3c000000))) + +#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE)) + +#ifndef __ASSEMBLY__ +#define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) +#define clps_readw(off) readw(CLPS711X_VIRT_BASE + (off)) +#define clps_readl(off) readl(CLPS711X_VIRT_BASE + (off)) +#define clps_writeb(val,off) writeb(val, CLPS711X_VIRT_BASE + (off)) +#define clps_writew(val,off) writew(val, CLPS711X_VIRT_BASE + (off)) +#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off)) +#endif + +#define CS0_PHYS_BASE (0x00000000) +#define CS1_PHYS_BASE (0x10000000) +#define CS2_PHYS_BASE (0x20000000) +#define CS3_PHYS_BASE (0x30000000) +#define CS4_PHYS_BASE (0x40000000) +#define CS5_PHYS_BASE (0x50000000) +#define CS6_PHYS_BASE (0x60000000) +#define CS7_PHYS_BASE (0x70000000) + +#define CLPS711X_SRAM_BASE CS6_PHYS_BASE +#define CLPS711X_SRAM_SIZE (48 * 1024) + +#define CLPS711X_SDRAM0_BASE (0xc0000000) +#define CLPS711X_SDRAM1_BASE (0xd0000000) + +#endif diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/include/mach/uncompress.h index 4915b352496..5f02d06dc65 100644 --- a/arch/arm/mach-clps711x/p720t-leds.c +++ b/arch/arm/mach-clps711x/include/mach/uncompress.h @@ -1,7 +1,5 @@ /* - * linux/arch/arm/mach-clps711x/leds.c - * - * Integrator LED control routines + * arch/arm/mach-clps711x/include/mach/uncompress.h * * Copyright (C) 2000 Deep Blue Solutions Ltd * @@ -19,49 +17,39 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/kernel.h> -#include <linux/init.h> +#include <mach/clps711x.h> -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/leds.h> -#include <asm/system.h> -#include <asm/mach-types.h> +#ifdef CONFIG_DEBUG_CLPS711X_UART2 +#define SYSFLGx SYSFLG2 +#define UARTDRx UARTDR2 +#else +#define SYSFLGx SYSFLG1 +#define UARTDRx UARTDR1 +#endif -#include <asm/hardware/clps7111.h> -#include <asm/hardware/ep7212.h> +#define phys_reg(x) (*(volatile u32 *)(CLPS711X_PHYS_BASE + (x))) -static void p720t_leds_event(led_event_t ledevt) +/* + * The following code assumes the serial port has already been + * initialized by the bootloader. If you didn't setup a port in + * your bootloader then nothing will appear (which might be desired). + * + * This does not append a newline + */ +static inline void putc(int c) { - unsigned long flags; - u32 pddr; - - local_irq_save(flags); - switch(ledevt) { - case led_idle_start: - break; - - case led_idle_end: - break; - - case led_timer: - pddr = clps_readb(PDDR); - clps_writeb(pddr ^ 1, PDDR); - break; - - default: - break; - } - - local_irq_restore(flags); + while (phys_reg(SYSFLGx) & SYSFLG_UTXFF) + barrier(); + phys_reg(UARTDRx) = c; } -static int __init leds_init(void) +static inline void flush(void) { - if (machine_is_p720t()) - leds_event = p720t_leds_event; - - return 0; + while (phys_reg(SYSFLGx) & SYSFLG_UBUSY) + barrier(); } -arch_initcall(leds_init); +/* + * nothing to do + */ +#define arch_decomp_setup() diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c deleted file mode 100644 index ca102960f52..00000000000 --- a/arch/arm/mach-clps711x/irq.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/irq.c - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/list.h> - -#include <asm/mach/irq.h> -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/irq.h> - -#include <asm/hardware/clps7111.h> - -static void int1_mask(unsigned int irq) -{ - u32 intmr1; - - intmr1 = clps_readl(INTMR1); - intmr1 &= ~(1 << irq); - clps_writel(intmr1, INTMR1); -} - -static void int1_ack(unsigned int irq) -{ - u32 intmr1; - - intmr1 = clps_readl(INTMR1); - intmr1 &= ~(1 << irq); - clps_writel(intmr1, INTMR1); - - switch (irq) { - case IRQ_CSINT: clps_writel(0, COEOI); break; - case IRQ_TC1OI: clps_writel(0, TC1EOI); break; - case IRQ_TC2OI: clps_writel(0, TC2EOI); break; - case IRQ_RTCMI: clps_writel(0, RTCEOI); break; - case IRQ_TINT: clps_writel(0, TEOI); break; - case IRQ_UMSINT: clps_writel(0, UMSEOI); break; - } -} - -static void int1_unmask(unsigned int irq) -{ - u32 intmr1; - - intmr1 = clps_readl(INTMR1); - intmr1 |= 1 << irq; - clps_writel(intmr1, INTMR1); -} - -static struct irq_chip int1_chip = { - .ack = int1_ack, - .mask = int1_mask, - .unmask = int1_unmask, -}; - -static void int2_mask(unsigned int irq) -{ - u32 intmr2; - - intmr2 = clps_readl(INTMR2); - intmr2 &= ~(1 << (irq - 16)); - clps_writel(intmr2, INTMR2); -} - -static void int2_ack(unsigned int irq) -{ - u32 intmr2; - - intmr2 = clps_readl(INTMR2); - intmr2 &= ~(1 << (irq - 16)); - clps_writel(intmr2, INTMR2); - - switch (irq) { - case IRQ_KBDINT: clps_writel(0, KBDEOI); break; - } -} - -static void int2_unmask(unsigned int irq) -{ - u32 intmr2; - - intmr2 = clps_readl(INTMR2); - intmr2 |= 1 << (irq - 16); - clps_writel(intmr2, INTMR2); -} - -static struct irq_chip int2_chip = { - .ack = int2_ack, - .mask = int2_mask, - .unmask = int2_unmask, -}; - -void __init clps711x_init_irq(void) -{ - unsigned int i; - - for (i = 0; i < NR_IRQS; i++) { - if (INT1_IRQS & (1 << i)) { - set_irq_handler(i, handle_level_irq); - set_irq_chip(i, &int1_chip); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - if (INT2_IRQS & (1 << i)) { - set_irq_handler(i, handle_level_irq); - set_irq_chip(i, &int2_chip); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - } - } - - /* - * Disable interrupts - */ - clps_writel(0, INTMR1); - clps_writel(0, INTMR2); - - /* - * Clear down any pending interrupts - */ - clps_writel(0, COEOI); - clps_writel(0, TC1EOI); - clps_writel(0, TC2EOI); - clps_writel(0, RTCEOI); - clps_writel(0, TEOI); - clps_writel(0, UMSEOI); - clps_writel(0, SYNCIO); - clps_writel(0, KBDEOI); -} diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c deleted file mode 100644 index a00f77ef8df..00000000000 --- a/arch/arm/mach-clps711x/mm.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/mm.c - * - * Generic MM setup for the CLPS711x-based machines. - * - * Copyright (C) 2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/bootmem.h> - -#include <asm/sizes.h> -#include <asm/hardware.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/mach/map.h> -#include <asm/hardware/clps7111.h> - -/* - * This maps the generic CLPS711x registers - */ -static struct map_desc clps711x_io_desc[] __initdata = { - { - .virtual = CLPS7111_VIRT_BASE, - .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE), - .length = SZ_1M, - .type = MT_DEVICE - } -}; - -void __init clps711x_map_io(void) -{ - iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); -} diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c deleted file mode 100644 index c8ecd2480c2..00000000000 --- a/arch/arm/mach-clps711x/p720t.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/p720t.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/mm.h> - -#include <asm/hardware.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/sizes.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/arch/syspld.h> - -#include "common.h" - -/* - * Map the P720T system PLD. It occupies two address spaces: - * SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000 - * We map both here. - */ -static struct map_desc p720t_io_desc[] __initdata = { - { - .virtual = SYSPLD_VIRT_BASE, - .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, { - .virtual = 0xfe400000, - .pfn = __phys_to_pfn(0x10400000), - .length = SZ_1M, - .type = MT_DEVICE - } -}; - -static void __init -fixup_p720t(struct machine_desc *desc, struct tag *tag, - char **cmdline, struct meminfo *mi) -{ - /* - * Our bootloader doesn't setup any tags (yet). - */ - if (tag->hdr.tag != ATAG_CORE) { - tag->hdr.tag = ATAG_CORE; - tag->hdr.size = tag_size(tag_core); - tag->u.core.flags = 0; - tag->u.core.pagesize = PAGE_SIZE; - tag->u.core.rootdev = 0x0100; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_MEM; - tag->hdr.size = tag_size(tag_mem32); - tag->u.mem.size = 4096; - tag->u.mem.start = PHYS_OFFSET; - - tag = tag_next(tag); - tag->hdr.tag = ATAG_NONE; - tag->hdr.size = 0; - } -} - -static void __init p720t_map_io(void) -{ - clps711x_map_io(); - iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); -} - -MACHINE_START(P720T, "ARM-Prospector720T") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = 0x80000000, - .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, - .boot_params = 0xc0000100, - .fixup = fixup_p720t, - .map_io = p720t_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, -MACHINE_END - -static int p720t_hw_init(void) -{ - /* - * Power down as much as possible in case we don't - * have the drivers loaded. - */ - PLD_LCDEN = 0; - PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON); - - PLD_KBD = 0; - PLD_IO = 0; - PLD_IRDA = 0; - PLD_CODEC = 0; - PLD_TCH = 0; - PLD_SPI = 0; -#ifndef CONFIG_DEBUG_LL - PLD_COM2 = 0; - PLD_COM1 = 0; -#endif - - return 0; -} - -__initcall(p720t_hw_init); - diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c deleted file mode 100644 index e5dc33f1f95..00000000000 --- a/arch/arm/mach-clps711x/time.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/time.c - * - * Copyright (C) 2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/timex.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/sched.h> - -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/leds.h> -#include <asm/io.h> -#include <asm/hardware/clps7111.h> - -#include <asm/mach/time.h> - - -/* - * gettimeoffset() returns time since last timer tick, in usecs. - * - * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. - * 'tick' is usecs per jiffy. - */ -static unsigned long clps711x_gettimeoffset(void) -{ - unsigned long hwticks; - hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */ - return (hwticks * (tick_nsec / 1000)) / LATCH; -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t -p720t_timer_interrupt(int irq, void *dev_id) -{ - timer_tick(); - return IRQ_HANDLED; -} - -static struct irqaction clps711x_timer_irq = { - .name = "CLPS711x Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = p720t_timer_interrupt, -}; - -static void __init clps711x_timer_init(void) -{ - struct timespec tv; - unsigned int syscon; - - syscon = clps_readl(SYSCON1); - syscon |= SYSCON1_TC2S | SYSCON1_TC2M; - clps_writel(syscon, SYSCON1); - - clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */ - - setup_irq(IRQ_TC2OI, &clps711x_timer_irq); - - tv.tv_nsec = 0; - tv.tv_sec = clps_readl(RTCDR); - do_settimeofday(&tv); -} - -struct sys_timer clps711x_timer = { - .init = clps711x_timer_init, - .offset = clps711x_gettimeoffset, -}; |