diff options
Diffstat (limited to 'arch/arm/mach-bcmring')
65 files changed, 16648 insertions, 0 deletions
diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig new file mode 100644 index 00000000000..457b4384913 --- /dev/null +++ b/arch/arm/mach-bcmring/Kconfig @@ -0,0 +1,21 @@ +choice + prompt "Processor selection in BCMRING family of devices" + depends on ARCH_BCMRING + default ARCH_BCM11107 + +config ARCH_FPGA11107 + bool "FPGA11107" + +config ARCH_BCM11107 + bool "BCM11107" +endchoice + +menu "BCMRING Options" + depends on ARCH_BCMRING + +config BCM_ZRELADDR + hex "Compressed ZREL ADDR" + +endmenu + +# source "drivers/char/bcmring/Kconfig" diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile new file mode 100644 index 00000000000..f8d9fcedf91 --- /dev/null +++ b/arch/arm/mach-bcmring/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. + +obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o +obj-y += csp/ diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot new file mode 100644 index 00000000000..fb53b283beb --- /dev/null +++ b/arch/arm/mach-bcmring/Makefile.boot @@ -0,0 +1,6 @@ +# Address where decompressor will be written and eventually executed. +# +# default to SDRAM +zreladdr-y := $(CONFIG_BCM_ZRELADDR) +params_phys-y := 0x00000800 + diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c new file mode 100644 index 00000000000..0da693b0f7e --- /dev/null +++ b/arch/arm/mach-bcmring/arch.c @@ -0,0 +1,157 @@ +/***************************************************************************** +* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/spinlock.h> +#include <linux/module.h> + +#include <linux/proc_fs.h> +#include <linux/sysctl.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/time.h> + +#include <asm/mach/arch.h> +#include <mach/dma.h> +#include <mach/hardware.h> +#include <mach/csp/mm_io.h> +#include <mach/csp/chipcHw_def.h> +#include <mach/csp/chipcHw_inline.h> + +#include <cfg_global.h> + +#include "core.h" + +HW_DECLARE_SPINLOCK(arch) +HW_DECLARE_SPINLOCK(gpio) +#if defined(CONFIG_DEBUG_SPINLOCK) + EXPORT_SYMBOL(bcmring_gpio_reg_lock); +#endif + +/* FIXME: temporary solution */ +#define BCM_SYSCTL_REBOOT_WARM 1 +#define CTL_BCM_REBOOT 112 + +/* sysctl */ +int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */ + +static struct ctl_table_header *bcmring_sysctl_header; + +static struct ctl_table bcmring_sysctl_warm_reboot[] = { + { + .ctl_name = BCM_SYSCTL_REBOOT_WARM, + .procname = "warm", + .data = &bcmring_arch_warm_reboot, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec}, + {} +}; + +static struct ctl_table bcmring_sysctl_reboot[] = { + { + .ctl_name = CTL_BCM_REBOOT, + .procname = "reboot", + .mode = 0555, + .child = bcmring_sysctl_warm_reboot}, + {} +}; + +static struct platform_device nand_device = { + .name = "bcm-nand", + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &nand_device, +}; + +/**************************************************************************** +* +* Called from the customize_machine function in arch/arm/kernel/setup.c +* +* The customize_machine function is tagged as an arch_initcall +* (see include/linux/init.h for the order that the various init sections +* are called in. +* +*****************************************************************************/ +static void __init bcmring_init_machine(void) +{ + + bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot); + + /* Enable spread spectrum */ + chipcHw_enableSpreadSpectrum(); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + + bcmring_amba_init(); + + dma_init(); +} + +/**************************************************************************** +* +* Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags +* passed in by the boot loader. +* +*****************************************************************************/ + +static void __init bcmring_fixup(struct machine_desc *desc, + struct tag *t, char **cmdline, struct meminfo *mi) { +#ifdef CONFIG_BLK_DEV_INITRD + printk(KERN_NOTICE "bcmring_fixup\n"); + t->hdr.tag = ATAG_CORE; + t->hdr.size = tag_size(tag_core); + t->u.core.flags = 0; + t->u.core.pagesize = PAGE_SIZE; + t->u.core.rootdev = 31 << 8 | 0; + t = tag_next(t); + + t->hdr.tag = ATAG_MEM; + t->hdr.size = tag_size(tag_mem32); + t->u.mem.start = CFG_GLOBAL_RAM_BASE; + t->u.mem.size = CFG_GLOBAL_RAM_SIZE; + + t = tag_next(t); + + t->hdr.tag = ATAG_NONE; + t->hdr.size = 0; +#endif +} + +/**************************************************************************** +* +* Machine Description +* +*****************************************************************************/ + +MACHINE_START(BCMRING, "BCMRING") + /* Maintainer: Broadcom Corporation */ + .phys_io = MM_IO_START, + .io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc, + .fixup = bcmring_fixup, + .map_io = bcmring_map_io, + .init_irq = bcmring_init_irq, + .timer = &bcmring_timer, + .init_machine = bcmring_init_machine +MACHINE_END diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c new file mode 100644 index 00000000000..14bafc38f2d --- /dev/null +++ b/arch/arm/mach-bcmring/clock.c @@ -0,0 +1,224 @@ +/***************************************************************************** +* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/string.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <mach/csp/hw_cfg.h> +#include <mach/csp/chipcHw_def.h> +#include <mach/csp/chipcHw_reg.h> +#include <mach/csp/chipcHw_inline.h> + +#include <asm/clkdev.h> + +#include "clock.h" + +#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY) +#define clk_is_pll1(x) ((x)->type & CLK_TYPE_PLL1) +#define clk_is_pll2(x) ((x)->type & CLK_TYPE_PLL2) +#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE) +#define clk_is_bypassable(x) ((x)->type & CLK_TYPE_BYPASSABLE) + +#define clk_is_using_xtal(x) ((x)->mode & CLK_MODE_XTAL) + +static DEFINE_SPINLOCK(clk_lock); + +static void __clk_enable(struct clk *clk) +{ + if (!clk) + return; + + /* enable parent clock first */ + if (clk->parent) + __clk_enable(clk->parent); + + if (clk->use_cnt++ == 0) { + if (clk_is_pll1(clk)) { /* PLL1 */ + chipcHw_pll1Enable(clk->rate_hz, 0); + } else if (clk_is_pll2(clk)) { /* PLL2 */ + chipcHw_pll2Enable(clk->rate_hz); + } else if (clk_is_using_xtal(clk)) { /* source is crystal */ + if (!clk_is_primary(clk)) + chipcHw_bypassClockEnable(clk->csp_id); + } else { /* source is PLL */ + chipcHw_setClockEnable(clk->csp_id); + } + } +} + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + if (!clk) + return -EINVAL; + + spin_lock_irqsave(&clk_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_enable); + +static void __clk_disable(struct clk *clk) +{ + if (!clk) + return; + + BUG_ON(clk->use_cnt == 0); + + if (--clk->use_cnt == 0) { + if (clk_is_pll1(clk)) { /* PLL1 */ + chipcHw_pll1Disable(); + } else if (clk_is_pll2(clk)) { /* PLL2 */ + chipcHw_pll2Disable(); + } else if (clk_is_using_xtal(clk)) { /* source is crystal */ + if (!clk_is_primary(clk)) + chipcHw_bypassClockDisable(clk->csp_id); + } else { /* source is PLL */ + chipcHw_setClockDisable(clk->csp_id); + } + } + + if (clk->parent) + __clk_disable(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (!clk) + return; + + spin_lock_irqsave(&clk_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clk_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + if (!clk) + return 0; + + return clk->rate_hz; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + unsigned long actual; + unsigned long rate_hz; + + if (!clk) + return -EINVAL; + + if (!clk_is_programmable(clk)) + return -EINVAL; + + if (clk->use_cnt) + return -EBUSY; + + spin_lock_irqsave(&clk_lock, flags); + actual = clk->parent->rate_hz; + rate_hz = min(actual, rate); + spin_unlock_irqrestore(&clk_lock, flags); + + return rate_hz; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + unsigned long actual; + unsigned long rate_hz; + + if (!clk) + return -EINVAL; + + if (!clk_is_programmable(clk)) + return -EINVAL; + + if (clk->use_cnt) + return -EBUSY; + + spin_lock_irqsave(&clk_lock, flags); + actual = clk->parent->rate_hz; + rate_hz = min(actual, rate); + rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz); + clk->rate_hz = rate_hz; + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_set_rate); + +struct clk *clk_get_parent(struct clk *clk) +{ + if (!clk) + return NULL; + + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + struct clk *old_parent; + + if (!clk || !parent) + return -EINVAL; + + if (!clk_is_primary(parent) || !clk_is_bypassable(clk)) + return -EINVAL; + + /* if more than one user, parent is not allowed */ + if (clk->use_cnt > 1) + return -EBUSY; + + if (clk->parent == parent) + return 0; + + spin_lock_irqsave(&clk_lock, flags); + old_parent = clk->parent; + clk->parent = parent; + if (clk_is_using_xtal(parent)) + clk->mode |= CLK_MODE_XTAL; + else + clk->mode &= (~CLK_MODE_XTAL); + + /* if clock is active */ + if (clk->use_cnt != 0) { + clk->use_cnt--; + /* enable clock with the new parent */ + __clk_enable(clk); + /* disable the old parent */ + __clk_disable(old_parent); + } + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_set_parent); diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h new file mode 100644 index 00000000000..5e0b9813897 --- /dev/null +++ b/arch/arm/mach-bcmring/clock.h @@ -0,0 +1,33 @@ +/***************************************************************************** +* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ +#include <mach/csp/chipcHw_def.h> + +#define CLK_TYPE_PRIMARY 1 /* primary clock must NOT have a parent */ +#define CLK_TYPE_PLL1 2 /* PPL1 */ +#define CLK_TYPE_PLL2 4 /* PPL2 */ +#define CLK_TYPE_PROGRAMMABLE 8 /* programmable clock rate */ +#define CLK_TYPE_BYPASSABLE 16 /* parent can be changed */ + +#define CLK_MODE_XTAL 1 /* clock source is from crystal */ + +struct clk { + const char *name; /* clock name */ + unsigned int type; /* clock type */ + unsigned int mode; /* current mode */ + volatile int use_bypass; /* indicate if it's in bypass mode */ + chipcHw_CLOCK_e csp_id; /* clock ID for CSP CHIPC */ + unsigned long rate_hz; /* clock rate in Hz */ + unsigned int use_cnt; /* usage count */ + struct clk *parent; /* parent clock */ +}; diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c new file mode 100644 index 00000000000..492c649f451 --- /dev/null +++ b/arch/arm/mach-bcmring/core.c @@ -0,0 +1,367 @@ +/* + * derived from linux/arch/arm/mach-versatile/core.c + * linux/arch/arm/mach-bcmring/core.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* Portions copyright Broadcom 2008 */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/amba/bus.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> + +#include <linux/amba/bus.h> +#include <mach/csp/mm_addr.h> +#include <mach/hardware.h> +#include <asm/clkdev.h> +#include <linux/io.h> +#include <asm/irq.h> +#include <asm/hardware/arm_timer.h> +#include <asm/mach-types.h> + +#include <asm/mach/arch.h> +#include <asm/mach/flash.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <asm/mach/mmc.h> + +#include <cfg_global.h> + +#include "clock.h" + +#include <csp/secHw.h> +#include <mach/csp/secHw_def.h> +#include <mach/csp/chipcHw_inline.h> +#include <mach/csp/tmrHw_reg.h> + +#define AMBA_DEVICE(name, initname, base, plat, size) \ +static struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0, \ + .init_name = initname, \ + .platform_data = plat \ + }, \ + .res = { \ + .start = MM_ADDR_IO_##base, \ + .end = MM_ADDR_IO_##base + (size) - 1, \ + .flags = IORESOURCE_MEM \ + }, \ + .dma_mask = ~0, \ + .irq = { \ + IRQ_##base \ + } \ +} + + +AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K); +AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K); + +static struct clk pll1_clk = { + .name = "PLL1", + .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1, + .rate_hz = 2000000000, + .use_cnt = 7, +}; + +static struct clk uart_clk = { + .name = "UART", + .type = CLK_TYPE_PROGRAMMABLE, + .csp_id = chipcHw_CLOCK_UART, + .rate_hz = HW_CFG_UART_CLK_HZ, + .parent = &pll1_clk, +}; + +static struct clk_lookup lookups[] = { + { /* UART0 */ + .dev_id = "uarta", + .clk = &uart_clk, + }, { /* UART1 */ + .dev_id = "uartb", + .clk = &uart_clk, + } +}; + +static struct amba_device *amba_devs[] __initdata = { + &uartA_device, + &uartB_device, +}; + +void __init bcmring_amba_init(void) +{ + int i; + u32 bus_clock; + +/* Linux is run initially in non-secure |