aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c')
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c1017
1 files changed, 1017 insertions, 0 deletions
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 00000000000..ff7b436d093
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+* @file dmacHw_extra.c
+*
+* @brief Extra Low level DMA controller driver routines
+*
+* @note
+*
+* These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT]; /* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+* @brief Overwrites data length in the descriptor
+*
+* This function overwrites data length in the descriptor
+*
+*
+* @return void
+*
+* @note
+* This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ );
+
+/****************************************************************************/
+/**
+* @brief Helper function to display DMA registers
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module, /* [ IN ] DMA Controller unit (0-1) */
+ int channel, /* [ IN ] DMA Channel (0-7) / -1(all) */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */
+ ) {
+ int chan;
+
+ (*fpPrint) ("Displaying register content \n\n");
+ (*fpPrint) ("Module %d: Interrupt raw transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt raw src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt raw error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt stat transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt stat src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt stat error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt mask transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt mask src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt mask error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: Interrupt clear transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear block 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+ (*fpPrint) ("Module %d: Interrupt clear src transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear dst transfer 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+ (*fpPrint) ("Module %d: Interrupt clear error 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: SW source req 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest req 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+ (*fpPrint) ("Module %d: SW source signal 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest signal 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+ (*fpPrint) ("Module %d: SW source last 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+ (*fpPrint) ("Module %d: SW dest last 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+ (*fpPrint) ("--------------------------------------------------\n");
+ (*fpPrint) ("Module %d: misc config 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+ (*fpPrint) ("Module %d: misc channel enable 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+ (*fpPrint) ("Module %d: misc ID 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+ (*fpPrint) ("Module %d: misc test 0x%X\n",
+ module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+ if (channel == -1) {
+ for (chan = 0; chan < 8; chan++) {
+ (*fpPrint)
+ ("--------------------------------------------------\n");
+ (*fpPrint)
+ ("Module %d: Channel %d Source 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Destination 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d LLP 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_LLP(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+ }
+ } else {
+ chan = channel;
+ (*fpPrint)
+ ("--------------------------------------------------\n");
+ (*fpPrint)
+ ("Module %d: Channel %d Source 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Destination 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d LLP 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Control (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats 0x%X\n",
+ module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Source Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Dest Stats Addr 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (LO) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+ (*fpPrint)
+ ("Module %d: Channel %d Config (HI) 0x%X\n",
+ module, chan,
+ (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+ }
+}
+
+/****************************************************************************/
+/**
+* @brief Helper function to display descriptor ring
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ dmacHw_DESC_t *pStart;
+
+ if (pRing->pHead == NULL) {
+ return;
+ }
+
+ pStart = pRing->pHead;
+
+ while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+ if (pStart == pRing->pHead) {
+ (*fpPrint) ("Head\n");
+ }
+ if (pStart == pRing->pTail) {
+ (*fpPrint) ("Tail\n");
+ }
+ if (pStart == pRing->pProg) {
+ (*fpPrint) ("Prog\n");
+ }
+ if (pStart == pRing->pEnd) {
+ (*fpPrint) ("End\n");
+ }
+ if (pStart == pRing->pFree) {
+ (*fpPrint) ("Free\n");
+ }
+ (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+ (*fpPrint) ("sar 0x%0X\n", pStart->sar);
+ (*fpPrint) ("dar 0x%0X\n", pStart->dar);
+ (*fpPrint) ("llp 0x%0X\n", pStart->llp);
+ (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+ (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+ (*fpPrint) ("sstat 0x%0X\n", pStart->sstat);
+ (*fpPrint) ("dstat 0x%0X\n", pStart->dstat);
+ (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+ pStart = (dmacHw_DESC_t *) pStart->llp;
+ }
+ if (pStart == pRing->pHead) {
+ (*fpPrint) ("Head\n");
+ }
+ if (pStart == pRing->pTail) {
+ (*fpPrint) ("Tail\n");
+ }
+ if (pStart == pRing->pProg) {
+ (*fpPrint) ("Prog\n");
+ }
+ if (pStart == pRing->pEnd) {
+ (*fpPrint) ("End\n");
+ }
+ if (pStart == pRing->pFree) {
+ (*fpPrint) ("Free\n");
+ }
+ (*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+ (*fpPrint) ("sar 0x%0X\n", pStart->sar);
+ (*fpPrint) ("dar 0x%0X\n", pStart->dar);
+ (*fpPrint) ("llp 0x%0X\n", pStart->llp);
+ (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+ (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+ (*fpPrint) ("sstat 0x%0X\n", pStart->sstat);
+ (*fpPrint) ("dstat 0x%0X\n", pStart->dstat);
+ (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+* @brief Check if DMA channel is the flow controller
+*
+* @return 1 : If DMA is a flow controler
+* 0 : Peripheral is the flow controller
+*
+* @note
+* None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ uint32_t ttfc =
+ (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+ lo & dmacHw_REG_CTL_TTFC_MASK;
+
+ switch (ttfc) {
+ case dmacHw_REG_CTL_TTFC_MM_DMAC:
+ case dmacHw_REG_CTL_TTFC_MP_DMAC:
+ case dmacHw_REG_CTL_TTFC_PM_DMAC:
+ case dmacHw_REG_CTL_TTFC_PP_DMAC:
+ return 1;
+ }
+
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Overwrites data length in the descriptor
+*
+* This function overwrites data length in the descriptor
+*
+*
+* @return void
+*
+* @note
+* This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ dmacHw_DESC_t *pProg;
+ dmacHw_DESC_t *pHead;
+ int srcTs = 0;
+ int srcTrSize = 0;
+
+ pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+ pProg = pHead;
+
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+ srcTs = dataLen / srcTrSize;
+ do {
+ pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+ pProg = (dmacHw_DESC_t *) pProg->llp;
+ } while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+* @brief Clears the interrupt
+*
+* This function clears the DMA channel specific interrupt
+*
+*
+* @return void
+*
+* @note
+* Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+ dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Returns the cause of channel specific DMA interrupt
+*
+* This function returns the cause of interrupt
+*
+* @return Interrupt status, each bit representing a specific type of interrupt
+*
+* @note
+* Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+ if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_TRANS;
+ }
+ if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+ }
+ if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+ ((0x00000001 << pCblk->channel))) {
+ status |= dmacHw_INTERRUPT_STATUS_ERROR;
+ }
+
+ return status;
+}
+
+/****************************************************************************/
+/**
+* @brief Indentifies a DMA channel causing interrupt
+*
+* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+* @return NULL : No channel causing DMA interrupt
+* ! NULL : Handle to a channel causing DMA interrupt
+* @note
+* dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+ uint32_t i;
+
+ for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+ if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+ ((0x00000001 << dmacHw_gCblk[i].channel)))
+ ) {
+ return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+ }
+ }
+ return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+* @brief Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+* @return On failure : -1
+* On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */
+ void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */
+ size_t dataLen /* [ IN ] Data length in bytes */
+ ) {
+ int srcTs = 0;
+ int oddSize = 0;
+ int descCount = 0;
+ int dstTrSize = 0;
+ int srcTrSize = 0;
+ uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+ dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+ dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+ dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+ /* Skip Tx if buffer is NULL or length is unknown */
+ if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+ /* Do not initiate transfer */
+ return -1;
+ }
+
+ /* Ensure scatter and gather are transaction aligned */
+ if (pConfig->srcGatherWidth % srcTrSize
+ || pConfig->dstScatterWidth % dstTrSize) {
+ return -1;
+ }
+
+ /*
+ Background 1: DMAC can not perform DMA if source and destination addresses are
+ not properly aligned with the channel's transaction width. So, for successful
+ DMA transfer, transaction width must be set according to the alignment of the
+ source and destination address.
+ */
+
+ /* Adjust destination transaction width if destination address is not aligned properly */
+ dstTrWidth = pConfig->dstMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+ dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+ dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+ }
+
+ /* Adjust source transaction width if source address is not aligned properly */
+ srcTrWidth = pConfig->srcMaxTransactionWidth;
+ while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+ srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+ srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+ }
+
+ /* Find the maximum transaction per descriptor */
+ if (pConfig->maxDataPerBlock
+ && ((pConfig->maxDataPerBlock / srcTrSize) <
+ dmacHw_MAX_BLOCKSIZE)) {
+ maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+ }
+
+ /* Find number of source transactions needed to complete the DMA transfer */
+ srcTs = dataLen / srcTrSize;
+ /* Find the odd number of bytes that need to be transferred as single byte transaction width */
+ if (srcTs && (dstTrSize > srcTrSize)) {
+ oddSize = dataLen % dstTrSize;
+ /* Adjust source transaction count due to "oddSize" */
+ srcTs = srcTs - (oddSize / srcTrSize);
+ } else {
+ oddSize = dataLen % srcTrSize;
+ }
+ /* Adjust "descCount" due to "oddSize" */
+ if (oddSize) {
+ descCount++;
+ }
+
+ /* Find the number of descriptor needed for total "srcTs" */
+ if (srcTs) {
+ descCount += ((srcTs - 1) / maxBlockSize) + 1;
+ }
+
+ return descCount;
+}
+
+/****************************************************************************/
+/**
+* @brief Check the existance of pending descriptor
+*
+* This function confirmes if there is any pending descriptor in the chain
+* to program the channel
+*
+* @return 1 : Channel need to be programmed with pending descriptor
+* 0 : No more pending descriptor to programe the channel
+*
+* @note
+* - This function should be called from ISR in case there are pending
+* descriptor to program the channel.
+*
+* Example:
+*
+* dmac_isr ()
+* {
+* ...
+* if (dmacHw_descriptorPending (handle))
+* {
+* dmacHw_initiateTransfer (handle);
+* }
+* }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ /* Make sure channel is not busy */
+ if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+ /* Check if pEnd is not processed */
+ if (pRing->pEnd) {
+ /* Something left for processing */
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Program channel register to stop transfer
+*
+* Ensures the channel is not doing any transfer after calling this function
+*
+* @return void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk;
+
+ pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ /* Stop the channel */
+ dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+* @brief Deallocates source or destination memory, allocated
+*
+* This function can be called to deallocate data memory that was DMAed successfully
+*
+* @return On failure : -1
+* On success : Number of buffer freed
+*
+* @note
+* This function will be called ONLY, when source OR destination address is pointing
+* to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ uint32_t count = 0;
+
+ if (fpFree == NULL) {
+ return -1;
+ }
+
+ while ((pRing->pFree != pRing->pTail)
+ && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+ if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+ /* Identify, which memory to free */
+ if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ (*fpFree) ((void *)pRing->pFree->dar);
+ } else {
+ /* Destination was a peripheral */
+ (*fpFree) ((void *)pRing->pFree->sar);
+ }
+ /* Unmark user memory to indicate it is freed */
+ pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+ }
+ dmacHw_NEXT_DESC(pRing, pFree);
+
+ count++;
+ }
+
+ return count;
+}
+
+/****************************************************************************/
+/**
+* @brief Prepares descriptor ring, when source peripheral working as a flow controller
+*
+* This function will update the discriptor ring by allocating buffers, when source peripheral
+* has to work as a flow controller to transfer data from:
+* - Peripheral to memory.
+*
+* @return On failure : -1
+* On success : Number of descriptor updated
+*
+*
+* @note
+* Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t srcAddr, /* [ IN ] Source peripheral address */
+ void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */
+ int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+ int num /* [ IN ] Number of descriptor to set */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+ dmacHw_DESC_t *pProg = NULL;
+ dmacHw_DESC_t *pLast = NULL;
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ uint32_t dstAddr;
+ uint32_t controlParam;
+ int i;
+
+ dmacHw_ASSERT(pConfig->transferType ==
+ dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+ if (num > pRing->num) {
+ return -1;
+ }
+
+ pLast = pRing->pEnd; /* Last descriptor updated */
+ pProg = pRing->pHead; /* First descriptor in the new list */
+
+ controlParam = pConfig->srcUpdate |
+ pConfig->dstUpdate |
+ pConfig->srcMaxTransactionWidth |
+ pConfig->dstMaxTransactionWidth |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface |
+ pConfig->srcMaxBurstWidth |
+ pConfig->dstMaxBurstWidth |
+ dmacHw_REG_CTL_TTFC_PM_PERI |
+ dmacHw_REG_CTL_LLP_DST_EN |
+ dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+ for (i = 0; i < num; i++) {
+ /* Allocate Rx buffer only for idle descriptor */
+ if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+ ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+ ) {
+ /* Rx descriptor is not idle */
+ break;
+ }
+ /* Set source address */
+ pRing->pHead->sar = srcAddr;
+ if (fpAlloc) {
+ /* Allocate memory for buffer in descriptor */
+ dstAddr = (uint32_t) (*fpAlloc) (len);
+ /* Check the destination address */
+ if (dstAddr == 0) {
+ if (i == 0) {
+ /* Not a single descriptor is available */
+ return -1;
+ }
+ break;
+ }
+ /* Set destination address */
+ pRing->pHead->dar = dstAddr;
+ }
+ /* Set control information */
+ pRing->pHead->ctl.lo = controlParam;
+ /* Use "devCtl" to mark the memory that need to be freed later */
+ pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+ /* Descriptor is now owned by the channel */
+ pRing->pHead->ctl.hi = 0;
+ /* Remember the descriptor last updated */
+ pRing->pEnd = pRing->pHead;
+ /* Update next descriptor */
+ dmacHw_NEXT_DESC(pRing, pHead);
+ }
+
+ /* Mark the end of the list */
+ pRing->pEnd->ctl.lo &=
+ ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+ /* Connect the list */
+ if (pLast != pProg) {
+ pLast->ctl.lo |=
+ dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+ }
+ /* Mark the descriptors are updated */
+ pCblk->descUpdated = 1;
+ if (!pCblk->varDataStarted) {
+ /* LLP must be pointing to the first descriptor */
+ dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+ (uint32_t) pProg - pRing->virt2PhyOffset);
+ /* Channel, handling variable data started */
+ pCblk->varDataStarted = 1;
+ }
+
+ return i;
+}
+
+/****************************************************************************/
+/**
+* @brief Read data DMAed to memory
+*
+* This function will read data that has been DMAed to memory while transfering from:
+* - Memory to memory
+* - Peripheral to memory
+*
+* @param handle -
+* @param ppBbuf -
+* @param pLen -
+*
+* @return 0 - No more data is available to read
+* 1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ void **ppBbuf, /* [ OUT ] Data received */
+ size_t *pLlen /* [ OUT ] Length of the data received */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ (void)handle;
+
+ if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+ if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+ (pRing->pTail == pRing->pHead)
+ ) {
+ /* No receive data available */
+ *ppBbuf = (char *)NULL;
+ *pLlen = 0;
+
+ return 0;
+ }
+ }
+
+ /* Return read buffer and length */
+ *ppBbuf = (char *)pRing->pTail->dar;
+
+ /* Extract length of the received data */
+ if (DmaIsFlowController(pDescriptor)) {
+ uint32_t srcTrSize = 0;
+
+ switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+ srcTrSize = 1;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+ srcTrSize = 2;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+ srcTrSize = 4;
+ break;
+ case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+ srcTrSize = 8;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ /* Calculate length from the block size */
+ *pLlen =
+ (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+ srcTrSize;
+ } else {
+ /* Extract length from the source peripheral */
+ *pLlen = pRing->pTail->sstat;
+ }
+
+ /* Advance tail to next descriptor */
+ dmacHw_NEXT_DESC(pRing, pTail);
+
+ return 1;
+}
+
+/****************************************************************************/
+/**
+* @brief Set descriptor carrying control information
+*
+* This function will be used to send specific control information to the device
+* using the DMA channel
+*
+*
+* @return -1 - On failure
+* 0 - On success
+*
+* @note
+* None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ uint32_t ctlAddress, /* [ IN ] Address of the device control register */
+ uint32_t control /* [ IN ] Device control information */
+ ) {
+ dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+ if (ctlAddress == 0) {
+ return -1;
+ }
+
+ /* Check the availability of descriptors in the ring */
+ if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+ return -1;
+ }
+ /* Set control information */
+ pRing->pHead->devCtl = control;
+ /* Set source and destination address */
+ pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+ pRing->pHead->dar = ctlAddress;
+ /* Set control parameters */
+ if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+ pRing->pHead->ctl.lo = pConfig->transferType |
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_SRC_TRANSACTION_WIDTH_32 |
+ pConfig->dstMaxTransactionWidth |
+ dmacHw_SRC_BURST_WIDTH_0 |
+ dmacHw_DST_BURST_WIDTH_0 |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+ } else {
+ uint32_t transferType = 0;
+ switch (pConfig->transferType) {
+ case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+ transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+ break;
+ case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+ transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+ break;
+ default:
+ dmacHw_ASSERT(0);
+ }
+ pRing->pHead->ctl.lo = transferType |
+ dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+ dmacHw_SRC_TRANSACTION_WIDTH_32 |
+ pConfig->dstMaxTransactionWidth |
+ dmacHw_SRC_BURST_WIDTH_0 |
+ dmacHw_DST_BURST_WIDTH_0 |
+ pConfig->srcMasterInterface |
+ pConfig->dstMasterInterface |
+ pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+ }
+
+ /* Set block transaction size to one 32 bit transaction */
+ pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+ /* Remember the descriptor to initialize the registers */
+ if (pRing->pProg == dmacHw_DESC_INIT) {
+ pRing->pProg = pRing->pHead;
+ }
+ pRing->pEnd = pRing->pHead;
+
+ /* Advance the descriptor */
+ dmacHw_NEXT_DESC(pRing, pHead);
+
+ /* Update Tail pointer if destination is a peripheral */
+ if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+ pRing->pTail = pRing->pHead;
+ }
+ return 0;
+}
+
+/****************************************************************************/
+/**
+* @brief Sets channel specific user data
+*
+* This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *userData /* [ IN ] User data */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+* @brief Gets channel specific user data
+*
+* This function returns user data specific to a DMA channel
+*
+* @return user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+* @brief Resets descriptor control information
+*
+* @return void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */
+ ) {
+ int i;
+ dmacHw_DESC_RING_t *pRing;
+ dmacHw_DESC_t *pDesc;
+
+ pRing = dmacHw_GET_DESC_RING(pDescriptor);
+ pDesc = pRing->pHead;
+
+ for (i = 0; i < pRing->num; i++) {
+ /* Mark descriptor is ready to use */
+ pDesc->ctl.hi = dmacHw_DESC_FREE;
+ /* Look into next link list item */
+ pDesc++;
+ }
+ pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+ pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+* @brief Displays channel specific registers and other control parameters
+*
+* @return void
+*
+*
+* @note
+* None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
+ void *pDescriptor, /* [ IN ] Descriptor buffer */
+ int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */
+ ) {
+ dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+ DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+ DisplayDescRing(pDescriptor, fpPrint);
+}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-28 06:23:57 +0000