aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/board-yl-9200.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/board-yl-9200.c')
-rw-r--r--arch/arm/mach-at91/board-yl-9200.c151
1 files changed, 72 insertions, 79 deletions
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index bbbfd06f5e0..46fdb0c68a6 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -22,6 +22,7 @@
*/
#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
@@ -33,7 +34,6 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
@@ -42,45 +42,26 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/hardware.h>
+#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
+#include <mach/cpu.h>
+#include "at91_aic.h"
+#include "board.h"
#include "generic.h"
+#include "gpio.h"
-static void __init yl9200_map_io(void)
+static void __init yl9200_init_early(void)
{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-
- /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
- at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART0 on ttyS2. (Rx & Tx only to JP3) */
- at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
- /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
+ /* Set cpu type: PQFP */
+ at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init yl9200_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
+ /* Initialize processor: 18.432 MHz crystal */
+ at91_initialize(18432000);
}
-
/*
* LEDs
*/
@@ -112,7 +93,7 @@ static struct gpio_led yl9200_leds[] = {
/*
* Ethernet
*/
-static struct at91_eth_data __initdata yl9200_eth_data = {
+static struct macb_platform_data __initdata yl9200_eth_data = {
.phy_irq_pin = AT91_PIN_PB28,
.is_rmii = 1,
};
@@ -122,6 +103,8 @@ static struct at91_eth_data __initdata yl9200_eth_data = {
*/
static struct at91_usbh_data __initdata yl9200_usbh_data = {
.ports = 1, /* PQFP version of AT91RM9200 */
+ .vbus_pin = {-EINVAL, -EINVAL},
+ .overcurrent_pin= {-EINVAL, -EINVAL},
};
/*
@@ -137,10 +120,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = {
/*
* MMC
*/
-static struct at91_mmc_data __initdata yl9200_mmc_data = {
- .det_pin = AT91_PIN_PB9,
- // .wp_pin = ... not connected
- .wire4 = 1,
+static struct mci_platform_data __initdata yl9200_mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = AT91_PIN_PB9,
+ .wp_pin = -EINVAL,
+ },
};
/*
@@ -150,67 +135,63 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
{
.name = "AT91 NAND partition 1, boot",
.offset = 0,
- .size = 1 * SZ_256K
+ .size = SZ_256K
},
{
.name = "AT91 NAND partition 2, kernel",
- .offset = 1 * SZ_256K,
- .size = 2 * SZ_1M - 1 * SZ_256K
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = (2 * SZ_1M) - SZ_256K
},
{
.name = "AT91 NAND partition 3, filesystem",
- .offset = 2 * SZ_1M,
+ .offset = MTDPART_OFS_NXTBLK,
.size = 14 * SZ_1M
},
{
.name = "AT91 NAND partition 4, storage",
- .offset = 16 * SZ_1M,
- .size = 16 * SZ_1M
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_16M
},
{
.name = "AT91 NAND partition 5, ext-fs",
- .offset = 32 * SZ_1M,
- .size = 32 * SZ_1M
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_32M
}
};
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(yl9200_nand_partition);
- return yl9200_nand_partition;
-}
-
static struct atmel_nand_data __initdata yl9200_nand_data = {
.ale = 6,
.cle = 7,
- // .det_pin = ... not connected
+ .det_pin = -EINVAL,
.rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
.enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
- .partition_info = nand_partitions,
+ .ecc_mode = NAND_ECC_SOFT,
+ .parts = yl9200_nand_partition,
+ .num_parts = ARRAY_SIZE(yl9200_nand_partition),
};
/*
* NOR Flash
*/
#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE 0x1000000
+#define YL9200_FLASH_SIZE SZ_16M
static struct mtd_partition yl9200_flash_partitions[] = {
{
.name = "Bootloader",
- .size = 0x00040000,
.offset = 0,
+ .size = SZ_256K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "Kernel",
- .size = 0x001C0000,
- .offset = 0x00040000,
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = (2 * SZ_1M) - SZ_256K
},
{
.name = "Filesystem",
- .size = MTDPART_SIZ_FULL,
- .offset = 0x00200000
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
}
};
@@ -387,21 +368,17 @@ static struct spi_board_info yl9200_spi_devices[] = {
* EPSON S1D13806 FB (discontinued chip)
* EPSON S1D13506 FB
*/
-#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>
-#define AT91_FB_REG_BASE 0x80000000L
-#define AT91_FB_REG_SIZE 0x200
-#define AT91_FB_VMEM_BASE 0x80200000L
-#define AT91_FB_VMEM_SIZE 0x200000L
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
{
/* NWAIT Signal */
at91_set_A_periph(AT91_PIN_PC6, 0);
/* Initialization of the Static Memory Controller for Chip Select 2 */
- at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
+ at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
| AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */
| AT91_SMC_TDF_(0x100) /* float time */
);
@@ -516,29 +493,33 @@ static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
{S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
};
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
.initregs = yl9200_s1dfb_initregs,
.initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
.platform_init_video = yl9200_init_video,
};
+#define YL9200_FB_REG_BASE AT91_CHIPSELECT_7
+#define YL9200_FB_VMEM_BASE YL9200_FB_REG_BASE + SZ_2M
+#define YL9200_FB_VMEM_SIZE SZ_2M
+
static struct resource yl9200_s1dfb_resource[] = {
[0] = { /* video mem */
.name = "s1d13xxxfb memory",
- .start = AT91_FB_VMEM_BASE,
- .end = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+ .start = YL9200_FB_VMEM_BASE,
+ .end = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
.flags = IORESOURCE_MEM,
},
[1] = { /* video registers */
.name = "s1d13xxxfb registers",
- .start = AT91_FB_REG_BASE,
- .end = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+ .start = YL9200_FB_REG_BASE,
+ .end = YL9200_FB_REG_BASE + SZ_512 -1,
.flags = IORESOURCE_MEM,
},
};
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
+
static struct platform_device yl9200_s1dfb_device = {
.name = "s1d13806fb",
.id = -1,
@@ -563,6 +544,19 @@ void __init yl9200_add_device_video(void) {}
static void __init yl9200_board_init(void)
{
/* Serial */
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* USART0 on ttyS2. (Rx & Tx only to JP3) */
+ at91_register_uart(AT91RM9200_ID_US0, 2, 0);
+
+ /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
+ at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
at91_add_device_serial();
/* Ethernet */
at91_add_device_eth(&yl9200_eth_data);
@@ -573,7 +567,7 @@ static void __init yl9200_board_init(void)
/* I2C */
at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
/* MMC */
- at91_add_device_mmc(0, &yl9200_mmc_data);
+ at91_add_device_mci(0, &yl9200_mci0_data);
/* NAND */
at91_add_device_nand(&yl9200_nand_data);
/* NOR Flash */
@@ -594,11 +588,10 @@ static void __init yl9200_board_init(void)
MACHINE_START(YL9200, "uCdragon YL-9200")
/* Maintainer: S.Birtles */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = yl9200_map_io,
- .init_irq = yl9200_init_irq,
+ .init_time = at91rm9200_timer_init,
+ .map_io = at91_map_io,
+ .handle_irq = at91_aic_handle_irq,
+ .init_early = yl9200_init_early,
+ .init_irq = at91_init_irq_default,
.init_machine = yl9200_board_init,
MACHINE_END
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-09 04:08:46 +0000