1 files changed, 148 insertions, 0 deletions
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
new file mode 100644
index 00000000000..77f04b935b3
--- /dev/null
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -0,0 +1,148 @@
+/*
+ * linux/arch/arm/mach-at91/board-csb637.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata csb637_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init csb637_map_io(void)
+{
+	/* Initialize processor: 3.6864 MHz crystal */
+	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&csb637_uart_config);
+}
+
+static void __init csb637_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata csb637_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC0,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata csb637_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata csb637_udc_data = {
+	.vbus_pin     = AT91_PIN_PB28,
+	.pullup_pin   = AT91_PIN_PB1,
+};
+
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x1000000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
+static void __init csb637_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&csb637_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&csb637_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&csb637_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(NULL, 0);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
+}
+
+MACHINE_START(CSB637, "Cogent CSB637")
+	/* Maintainer: Bill Gatliff */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= csb637_map_io,
+	.init_irq	= csb637_init_irq,
+	.init_machine	= csb637_board_init,
+MACHINE_END