diff options
Diffstat (limited to 'arch/alpha')
26 files changed, 197 insertions, 1185 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index d5b9b5e645c..9944dedee5b 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -18,6 +18,8 @@ config ALPHA select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild index e423defed91..d97d66334e6 100644 --- a/arch/alpha/include/asm/Kbuild +++ b/arch/alpha/include/asm/Kbuild @@ -1,5 +1,7 @@ include include/asm-generic/Kbuild.asm +generic-y += clkdev.h + header-y += compiler.h header-y += console.h header-y += fpu.h diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 3bb7ffeae3b..c2cbe4fc391 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -14,8 +14,8 @@ */ -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) -#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic64_read(v) (*(volatile long *)&(v)->counter) diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h index db00f7885fa..e477bcd5b94 100644 --- a/arch/alpha/include/asm/fpu.h +++ b/arch/alpha/include/asm/fpu.h @@ -1,7 +1,9 @@ #ifndef __ASM_ALPHA_FPU_H #define __ASM_ALPHA_FPU_H +#ifdef __KERNEL__ #include <asm/special_insns.h> +#endif /* * Alpha floating-point control register defines: diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h index fd698a174f2..b87755a1955 100644 --- a/arch/alpha/include/asm/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h @@ -76,7 +76,10 @@ struct switch_stack { #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) -#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) +#define current_pt_regs() \ + ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (current_pt_regs()->r0 = 0) #endif diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index dcb221a4b5b..7d2f75be932 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -76,9 +76,11 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#ifdef __KERNEL__ /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ #define SOCK_NONBLOCK 0x40000000 +#endif /* __KERNEL__ */ #endif /* _ASM_SOCKET_H */ diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index b49ec2f8d6e..766fdfde2b7 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -433,36 +433,12 @@ clear_user(void __user *to, long len) #undef __module_address #undef __module_call -/* Returns: -EFAULT if exception before terminator, N if the entire - buffer filled, else strlen. */ +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) -extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); - -extern inline long -strncpy_from_user(char *to, const char __user *from, long n) -{ - long ret = -EFAULT; - if (__access_ok((unsigned long)from, 0, get_fs())) - ret = __strncpy_from_user(to, from, n); - return ret; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern long __strlen_user(const char __user *); - -extern inline long strlen_user(const char __user *str) -{ - return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; -} - -/* Returns: 0 if exception before NUL or reaching the supplied limit (N), - * a value greater than N if the limit would be exceeded, else strlen. */ -extern long __strnlen_user(const char __user *, long); - -extern inline long strnlen_user(const char __user *str, long n) -{ - return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; -} +extern long strncpy_from_user(char *dest, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); /* * About the exception table: diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 633b23b0664..a31a78eac9b 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -465,10 +465,12 @@ #define __NR_setns 501 #define __NR_accept4 502 #define __NR_sendmmsg 503 +#define __NR_process_vm_readv 504 +#define __NR_process_vm_writev 505 #ifdef __KERNEL__ -#define NR_SYSCALLS 504 +#define NR_SYSCALLS 506 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h new file mode 100644 index 00000000000..6b340d0f152 --- /dev/null +++ b/arch/alpha/include/asm/word-at-a-time.h @@ -0,0 +1,55 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +#include <asm/compiler.h> + +/* + * word-at-a-time interface for Alpha. + */ + +/* + * We do not use the word_at_a_time struct on Alpha, but it needs to be + * implemented to humour the generic code. + */ +struct word_at_a_time { + const unsigned long unused; +}; + +#define WORD_AT_A_TIME_CONSTANTS { 0 } + +/* Return nonzero if val has a zero */ +static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long zero_locations = __kernel_cmpbge(0, val); + *bits = zero_locations; + return zero_locations; +} + +static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +#define create_zero_mask(bits) (bits) + +static inline unsigned long find_zero(unsigned long bits) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Simple if have CIX instructions */ + return __kernel_cttz(bits); +#else + unsigned long t1, t2, t3; + /* Retain lowest set bit only */ + bits &= -bits; + /* Binary search for lowest set bit */ + t1 = bits & 0xf0; + t2 = bits & 0xcc; + t3 = bits & 0xaa; + if (t1) t1 = 4; + if (t2) t2 = 2; + if (t3) t3 = 1; + return t1 + t2 + t3; +#endif +} + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/alpha/include/uapi/asm/Kbuild b/arch/alpha/include/uapi/asm/Kbuild new file mode 100644 index 00000000000..baebb3da1d4 --- /dev/null +++ b/arch/alpha/include/uapi/asm/Kbuild @@ -0,0 +1,3 @@ +# UAPI Header export list +include include/uapi/asm-generic/Kbuild.asm + diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index d96e742d4dc..15fa821d09c 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(kernel_execve); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); @@ -74,8 +73,6 @@ EXPORT_SYMBOL(alpha_fp_emul); */ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__do_clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); /* * SMP-specific symbols. diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 6d159cee5f2..ec0da0567ab 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -663,58 +663,6 @@ kernel_thread: br ret_to_kernel .end kernel_thread -/* - * kernel_execve(path, argv, envp) - */ - .align 4 - .globl kernel_execve - .ent kernel_execve -kernel_execve: - /* We can be called from a module. */ - ldgp $gp, 0($27) - lda $sp, -(32+SIZEOF_PT_REGS+8)($sp) - .frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0 - stq $26, 0($sp) - stq $16, 8($sp) - stq $17, 16($sp) - stq $18, 24($sp) - .prologue 1 - - lda $16, 32($sp) - lda $17, 0 - lda $18, SIZEOF_PT_REGS - bsr $26, memset !samegp - - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152+32($sp) - - ldq $16, 8($sp) - ldq $17, 16($sp) - ldq $18, 24($sp) - lda $19, 32($sp) - bsr $26, do_execve !samegp - - ldq $26, 0($sp) - bne $0, 1f /* error! */ - - /* Move the temporary pt_regs struct from its current location - to the top of the kernel stack frame. See copy_thread for - details for a normal process. */ - lda $16, 0x4000 - SIZEOF_PT_REGS($8) - lda $17, 32($sp) - lda $18, SIZEOF_PT_REGS - bsr $26, memmove !samegp - - /* Take that over as our new stack frame and visit userland! */ - lda $sp, 0x4000 - SIZEOF_PT_REGS($8) - br $31, ret_from_sys_call - -1: lda $sp, 32+SIZEOF_PT_REGS+8($sp) - ret -.end kernel_execve - /* * Special system calls. Most of these are special in that they either @@ -797,115 +745,6 @@ sys_rt_sigreturn: .end sys_rt_sigreturn .align 4 - .globl sys_sethae - .ent sys_sethae -sys_sethae: - .prologue 0 - stq $16, 152($sp) - ret -.end sys_sethae - - .align 4 - .globl osf_getpriority - .ent osf_getpriority -osf_getpriority: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - jsr $26, sys_getpriority - - ldq $26, 0($sp) - blt $0, 1f - - /* Return value is the unbiased priority, i.e. 20 - prio. - This does result in negative return values, so signal - no error by writing into the R0 slot. */ - lda $1, 20 - stq $31, 16($sp) - subl $1, $0, $0 - unop - -1: lda $sp, 16($sp) - ret -.end osf_getpriority - - .align 4 - .globl sys_getxuid - .ent sys_getxuid -sys_getxuid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_UID($3) - ldl $1, CRED_EUID($3) - stq $1, 80($sp) - ret -.end sys_getxuid - - .align 4 - .globl sys_getxgid - .ent sys_getxgid -sys_getxgid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_GID($3) - ldl $1, CRED_EGID($3) - stq $1, 80($sp) - ret -.end sys_getxgid - - .align 4 - .globl sys_getxpid - .ent sys_getxpid -sys_getxpid: - .prologue 0 - ldq $2, TI_TASK($8) - - /* See linux/kernel/timer.c sys_getppid for discussion - about this loop. */ - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - ldl $0, TASK_TGID($2) -1: ldl $1, TASK_TGID($4) -#ifdef CONFIG_SMP - mov $4, $5 - mb - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - cmpeq $4, $5, $5 - beq $5, 1b -#endif - stq $1, 80($sp) - ret -.end sys_getxpid - - .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - mov $31, $17 - lda $16, 8($sp) - jsr $26, do_pipe_flags - - ldq $26, 0($sp) - bne $0, 1f - - /* The return values are in $0 and $20. */ - ldl $1, 12($sp) - ldl $0, 8($sp) - - stq $1, 80+16($sp) -1: lda $sp, 16($sp) - ret -.end sys_alpha_pipe - - .align 4 .globl sys_execve .ent sys_execve sys_execve: diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 98a103621af..63e77e3944c 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -145,27 +145,24 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd, long __user *, basep) { int error; - struct file *file; + struct fd arg = fdget(fd); struct osf_dirent_callback buf; - error = -EBADF; - file = fget(fd); - if (!file) - goto out; + if (!arg.file) + return -EBADF; buf.dirent = dirent; buf.basep = basep; buf.count = count; buf.error = 0; - error = vfs_readdir(file, osf_filldir, &buf); + error = vfs_readdir(arg.file, osf_filldir, &buf); if (error >= 0) error = buf.error; if (count != buf.count) error = count - buf.count; - fput(file); - out: + fdput(arg); return error; } @@ -278,8 +275,8 @@ linux_to_osf_stat(struct kstat *lstat, struct osf_stat __user *osf_stat) tmp.st_dev = lstat->dev; tmp.st_mode = lstat->mode; tmp.st_nlink = lstat->nlink; - tmp.st_uid = lstat->uid; - tmp.st_gid = lstat->gid; + tmp.st_uid = from_kuid_munged(current_user_ns(), lstat->uid); + tmp.st_gid = from_kgid_munged(current_user_ns(), lstat->gid); tmp.st_rdev = lstat->rdev; tmp.st_ldev = lstat->rdev; tmp.st_size = lstat->size; @@ -1404,3 +1401,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd, } #endif + +SYSCALL_DEFINE2(osf_getpriority, int, which, int, who) +{ + int prio = sys_getpriority(which, who); + if (prio >= 0) { + /* Return value is the unbiased priority, i.e. 20 - prio. + This does result in negative return values, so signal + no error */ + force_successful_syscall_return(); + prio = 20 - prio; + } + return prio; +} + +SYSCALL_DEFINE0(getxuid) +{ + current_pt_regs()->r20 = sys_geteuid(); + return sys_getuid(); +} + +SYSCALL_DEFINE0(getxgid) +{ + current_pt_regs()->r20 = sys_getegid(); + return sys_getgid(); +} + +SYSCALL_DEFINE0(getxpid) +{ + current_pt_regs()->r20 = sys_getppid(); + return sys_getpid(); +} + +SYSCALL_DEFINE0(alpha_pipe) +{ + int fd[2]; + int res = do_pipe_flags(fd, 0); + if (!res) { + /* The return values are in $0 and $20. */ + current_pt_regs()->r20 = fd[1]; + res = fd[0]; + } + return res; +} + +SYSCALL_DEFINE1(sethae, unsigned long, val) +{ + current_pt_regs()->hae = val; + return 0; +} diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c index 53649c7d006..b51f7b4818c 100644 --- a/arch/alpha/kernel/pci-sysfs.c +++ b/arch/alpha/kernel/pci-sysfs.c @@ -26,7 +26,7 @@ static int hose_mmap_page_range(struct pci_controller *hose, base = sparse ? hose->sparse_io_base : hose->dense_io_base; vma->vm_pgoff += base >> PAGE_SHIFT; - vma->vm_flags |= (VM_IO | VM_RESERVED); + vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP; return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 9816d5a4d17..ef757147cbf 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -256,12 +256,6 @@ pcibios_fixup_bus(struct pci_bus *bus) } } -void __init -pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 153d3fce3e8..83638aa096d 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -28,6 +28,7 @@ #include <linux/tty.h> #include <linux/console.h> #include <linux/slab.h> +#include <linux/rcupdate.h> #include <asm/reg.h> #include <asm/uaccess.h> @@ -54,9 +55,12 @@ cpu_idle(void) /* FIXME -- EV6 and LCA45 know how to power down the CPU. */ + rcu_idle_enter(); while (!need_resched()) cpu_relax(); - schedule(); + + rcu_idle_exit(); + schedule_preempt_disabled(); } } @@ -455,3 +459,22 @@ get_wchan(struct task_struct *p) } return pc; } + +int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) +{ + /* Avoid the HAE being gratuitously wrong, which would cause us + to do the whole turn off interrupts thing and restore it. */ + struct pt_regs regs = {.hae = alpha_mv.hae_cache}; + int err = do_execve(path, argv, envp, ®s); + if (!err) { + struct pt_regs *p = current_pt_regs(); + /* copy regs to normal position and off to userland we go... */ + *p = regs; + __asm__ __volatile__ ( + "mov %0, $sp;" + "br $31, ret_from_sys_call" + : : "r"(p)); + } + return err; +} +EXPORT_SYMBOL(kernel_execve); diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 35ddc02bfa4..a41ad90a97a 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -166,6 +166,7 @@ smp_callin(void) DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n", cpuid, current, current->active_mm)); + preempt_disable(); /* Do nothing. */ cpu_idle(); } diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 3ea809430ed..5d5865204a1 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -223,6 +223,7 @@ srmcons_init(void) driver->subtype = SYSTEM_TYPE_SYSCONS; driver->init_termios = tty_std_termios; tty_set_operations(driver, &srmcons_ops); + tty_port_link_device(&srmcons_singleton.port, driver, 0); err = tty_register_driver(driver); if (err) { put_tty_driver(driver); diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 87835235f11..2ac6b45c3e0 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -111,7 +111,7 @@ sys_call_table: .quad sys_socket .quad sys_connect .quad sys_accept - .quad osf_getpriority /* 100 */ + .quad sys_osf_getpriority /* 100 */ .quad sys_send .quad sys_recv .quad sys_sigreturn @@ -522,6 +522,8 @@ sys_call_table: .quad sys_setns .quad sys_accept4 .quad sys_sendmmsg + .quad sys_process_vm_readv + .quad sys_process_vm_writev /* 505 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index c0a83ab62b7..59660743237 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -31,8 +31,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)memchr.o \ $(ev6-y)copy_user.o \ $(ev6-y)clear_user.o \ - $(ev6-y)strncpy_from_user.o \ - $(ev67-y)strlen_user.o \ $(ev6-y)csum_ipv6_magic.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S deleted file mode 100644 index d2e28178cac..00000000000 --- a/arch/alpha/lib/ev6-strncpy_from_user.S +++ /dev/null @@ -1,424 +0,0 @@ -/* - * arch/alpha/lib/ev6-strncpy_from_user.S - * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * A bunch of instructions got moved and temp registers were changed - * to aid in scheduling. Control flow was also re-arranged to eliminate - * branches, and to provide longer code sequences to enable better scheduling. - * A total rewrite (using byte load/stores for start & tail sequences) - * is desirable, but very difficult to do without a from-scratch rewrite. - * Save that for the future. - */ - - -#include <asm/errno.h> -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 4 -__strncpy_from_user: - and a0, 7, t3 # E : find dest misalignment - beq a2, $zerolength # U : - - /* Are source and destination co-aligned? */ - mov a0, v0 # E : save the string start - xor a0, a1, t4 # E : - EX( ldq_u t1, 0(a1) ) # L : Latency=3 load first quadword - ldq_u t0, 0(a0) # L : load first (partial) aligned dest quadword - - addq a2, t3, a2 # E : bias count by dest misalignment - subq a2, 1, a3 # E : - addq zero, 1, t10 # E : - and t4, 7, t4 # E : misalignment between the two - - and a3, 7, t6 # E : number of tail bytes - sll t10, t6, t10 # E : t10 = bitmask of last count byte - bne t4, $unaligned # U : - lda t2, -1 # E : build a mask against false zero - - /* - * We are co-aligned; take care of a partial first word. - * On entry to this basic block: - * t0 == the first destination word for masking back in - * t1 == the first source word. - */ - - srl a3, 3, a2 # E : a2 = loop counter = (count - 1)/8 - addq a1, 8, a1 # E : - mskqh t2, a1, t2 # U : detection in the src word - nop - - /* Create the 1st output word and detect 0's in the 1st input word. */ - mskqh t1, a1, t3 # U : - mskql t0, a1, t0 # U : assemble the first output word - ornot t1, t2, t2 # E : - nop - - cmpbge zero, t2, t8 # E : bits set iff null found - or t0, t3, t0 # E : - beq a2, $a_eoc # U : - bne t8, $a_eos # U : 2nd branch in a quad. Bad. - - /* On entry to this basic block: - * t0 == a source quad not containing a null. - * a0 - current aligned destination address - * a1 - current aligned source address - * a2 - count of quadwords to move. - * NOTE: Loop improvement - unrolling this is going to be - * a huge win, since we're going to stall otherwise. - * Fix this later. For _really_ large copies, look - * at using wh64 on a look-ahead basis. See the code - * in clear_user.S and copy_user.S. - * Presumably, since (a0) and (a1) do not overlap (by C definition) - * Lots of nops here: - * - Separate loads from stores - * - Keep it to 1 branch/quadpack so the branch predictor - * can train. - */ -$a_loop: - stq_u t0, 0(a0) # L : - addq a0, 8, a0 # E : - nop - subq a2, 1, a2 # E : - - EX( ldq_u t0, 0(a1) ) # L : - addq a1, 8, a1 # E : - cmpbge zero, t0, t8 # E : Stall 2 cycles on t0 - beq a2, $a_eoc # U : - - beq t8, $a_loop # U : - nop - nop - nop - - /* Take care of the final (partial) word store. At this point - * the end-of-count bit is set in t8 iff it applies. - * - * On entry to this basic block we have: - * t0 == the source word containing the null - * t8 == the cmpbge mask that found it. - */ -$a_eos: - negq t8, t12 # E : find low bit set - and t8, t12, t12 # E : - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t12, t6, t8 # E : - zapnot t0, t8, t0 # U : clear src bytes > null - zap t1, t8, t1 # U : clear dst bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # L : - br $finish_up # L0 : - nop - nop - - /* Add the end-of-count bit to the eos detection bitmask. */ - .align 4 -$a_eoc: - or t10, t8, t8 - br $a_eos - nop - nop - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 4 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # L : load second src word - addq a1, 8, a1 # E : - mskql t0, a0, t0 # U : mask trailing garbage in dst - extqh t2, a1, t4 # U : - - or t1, t4, t1 # E : first aligned src word complete - mskqh t1, a0, t1 # U : mask leading garbage in src - or t0, t1, t0 # E : first output word complete - or t0, t6, t6 # E : mask original data for zero test - - cmpbge zero, t6, t8 # E : - beq a2, $u_eocfin # U : - bne t8, $u_final # U : bad news - 2nd branch in a quad - lda t6, -1 # E : mask out the bits we have - - mskql t6, a1, t6 # U : already seen - stq_u t0, 0(a0) # L : store first output word - or t6, t2, t2 # E : - cmpbge zero, t2, t8 # E : find nulls in second partial - - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - bne t8, $u_late_head_exit # U : - nop - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # U : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # L : read next high-order source word - addq a1, 8, a1 # E : - cmpbge zero, t2, t8 # E : - - beq a2, $u_eoc # U : - bne t8, $u_eos # U : - nop - nop - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - /* - * Extra nops here: - * separate load quads from store quads - * only one branch/quad to permit predictor training - */ - - .align 4 -$u_loop: - extqh t2, a1, t0 # U : extract high bits for current word - addq a1, 8, a1 # E : - extql t2, a1, t3 # U : extract low bits for next time - addq a0, 8, a0 # E : - - or t0, t1, t0 # E : current dst word now complete - EX( ldq_u t2, 0(a1) ) # L : load high word for next time - subq a2, 1, a2 # E : - nop - - stq_u t0, -8(a0) # L : save the current word - mov t3, t1 # E : - cmpbge zero, t2, t8 # E : test new word for eos - beq a2, $u_eoc # U : - - beq t8, $u_loop # U : - nop - nop - nop - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ - .align 4 -$u_eos: - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : first (partial) source word complete - cmpbge zero, t0, t8 # E : is the null in this first bit? - nop - - bne t8, $u_final # U : - stq_u t0, 0(a0) # L : the null was in the high-order bits - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - - .align 4 -$u_late_head_exit: - extql t2, a1, t0 # U : - cmpbge zero, t0, t8 # E : - or t8, t10, t6 # E : - cmoveq a2, t6, t8 # E : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ - .align 4 -$u_final: - negq t8, t6 # E : isolate low bit set - and t6, t8, t12 # E : - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t6, t12, t8 # E : - zapnot t0, t8, t0 # U : kill source bytes > null - zap t1, t8, t1 # U : kill dest bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # E : - br $finish_up # U : - nop - nop - - .align 4 -$u_eoc: # end-of-count - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : - cmpbge zero, t0, t8 # E : - nop - - .align 4 -$u_eocfin: # end-of-count, final word - or t10, t8, t8 # E : - br $u_final # U : - nop - nop - - /* Unaligned copy entry point. */ - .align 4 -$unaligned: - - srl a3, 3, a2 # U : a2 = loop counter = (count - 1)/8 - and a0, 7, t4 # E : find dest misalignment - and a1, 7, t5 # E : find src misalignment - mov zero, t0 # E : - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t6 # E : - beq t4, 1f # U : - ldq_u t0, 0(a0) # L : - lda t6, -1 # E : - - mskql t6, a0, t6 # E : - nop - nop - nop - - .align 4 -1: - subq a1, t4, a1 # E : sub dest misalignment from src addr - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - cmplt t4, t5, t12 # E : - extql t1, a1, t1 # U : shift src into place - lda t2, -1 # E : for creating masks later - - beq t12, $u_head # U : - mskqh t2, t5, t2 # U : begin src byte validity mask - cmpbge zero, t1, t8 # E : is there a zero? - nop - - extql t2, a1, t2 # U : - or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t2, t3 # E : - cmoveq a2, t5, t8 # E : Latency=2, extra map slot - - nop # E : goes with cmov - andnot t8, t3, t8 # E : - beq t8, $u_head # U : - nop - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # L : - negq t8, t6 # E : build bitmask of bytes <= zero - mskqh t1, t4, t1 # U : - and t6, t8, t12 # E : - - subq t12, 1, t6 # E : - or t6, t12, t8 # E : - zapnot t2, t8, t2 # U : prepare source word; mirror changes - zapnot t1, t8, t1 # U : to source validity mask - - andnot t0, t2, t0 # E : zero place for source to reside - or t0, t1, t0 # E : and put it there - stq_u t0, 0(a0) # L : - nop - - .align 4 -$finish_up: - zapnot t0, t12, t4 # U : was last byte written null? - and t12, 0xf0, t3 # E : binary search for the address of the - cmovne t4, 1, t4 # E : Latency=2, extra map slot - nop # E : with cmovne - - and t12, 0xcc, t2 # E : last byte written - and t12, 0xaa, t1 # E : - cmovne t3, 4, t3 # E : Latency=2, extra map slot - nop # E : with cmovne - - bic a0, 7, t0 - cmovne t2, 2, t2 # E : Latency=2, extra map slot - nop # E : with cmovne - nop - - cmovne t1, 1, t1 # E : Latency=2, extra map slot - nop # E : with cmovne - addq t0, t3, t0 # E : - addq t1, t2, t1 # E : - - addq t0, t1, t0 # E : - addq t0, t4, t0 # add one if we filled the buffer - subq t0, v0, v0 # find string length - ret # L0 : - - .align 4 -$zerolength: - nop - nop - nop - clr v0 - -$exception: - nop - nop - nop - ret - - .end __strncpy_from_user diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S deleted file mode 100644 index 57e0d77b81a..00000000000 --- a/arch/alpha/lib/ev67-strlen_user.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/alpha/lib/ev67-strlen_user.S - * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com> - * - * Return the length of the string including the NULL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * Try not to change the actual algorithm if possible for consistency. - */ - -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 4 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - nop - nop - nop - - .globl __strnlen_user - - .align 4 -__strnlen_user: - .prologue 0 - EX( ldq_u t0, 0(a0) ) # L : load first quadword (a0 may be misaligned) - lda t1, -1(zero) # E : - - insqh t1, a0, t1 # U : - andnot a0, 7, v0 # E : - or t1, t0, t0 # E : - subq a0, 1, a0 # E : get our +1 for the return - - cmpbge zero, t0, t1 # E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 # E : - subq a0, v0, t0 # E : - bne t1, $found # U : - - addq t2, t0, t2 # E : - addq a1, 1, a1 # E : - nop # E : - nop # E : - - .align 4 -$loop: ble t2, $limit # U : - EX( ldq t0, 8(v0) ) # L : - nop # E : - nop # E : - - cmpbge zero, t0, t1 # E : - subq t2, 8, t2 # E : - addq v0, 8, v0 # E : addr += 8 - beq t1, $loop # U : - -$found: cttz t1, t2 # U0 : - addq v0, t2, v0 # E : - subq v0, a0, v0 # E : - ret # L0 : - -$exception: - nop - nop - nop - ret - - .align 4 # currently redundant -$limit: - nop - nop - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S deleted file mode 100644 index 508a18e9647..00000000000 --- a/arch/alpha/lib/strlen_user.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/alpha/lib/strlen_user.S - * - * Return the length of the string including the NUL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - */ - -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 3 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - - .globl __strnlen_user - - .align 3 -__strnlen_user: - .prologue 0 - - EX( ldq_u t0, 0(a0) ) # load first quadword (a0 may be misaligned) - lda t1, -1(zero) - insqh t1, a0, t1 - andnot a0, 7, v0 - or t1, t0, t0 - subq a0, 1, a0 # get our +1 for the return - cmpbge zero, t0, t1 # t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 - subq a0, v0, t0 - bne t1, $found - - addq t2, t0, t2 - addq a1, 1, a1 - - .align 3 -$loop: ble t2, $limit - EX( ldq t0, 8(v0) ) - subq t2, 8, t2 - addq v0, 8, v0 # addr += 8 - cmpbge zero, t0, t1 - beq t1, $loop - -$found: negq t1, t2 # clear all but least set bit - and t1, t2, t1 - - and t1, 0xf0, t2 # binary search for that set bit - and t1, 0xcc, t3 - and t1, 0xaa, t4 - cmovne t2, 4, t2 - cmovne t3, 2, t3 - cmovne t4, 1, t4 - addq t2, t3, t2 - addq v0, t4, v0 - addq v0, t2, v0 - nop # dual issue next two on ev4 and ev5 - subq v0, a0, v0 -$exception: - ret - - .align 3 # currently redundant -$limit: - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S deleted file mode 100644 index 73ee21160ff..00000000000 --- a/arch/alpha/lib/strncpy_from_user.S +++ /dev/null @@ -1,339 +0,0 @@ -/* - * arch/alpha/lib/strncpy_from_user.S - * Contributed by Richard Henderson (rth@tamu.edu) - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - */ - - -#include <asm/errno.h> -#include <asm/regdef.h> - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 3 -$aligned: - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t8 # .. e1 : bits set iff null found - or t0, t3, t0 # e0 : - beq a2, $a_eoc # .. e1 : - bne t8, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == a source word not containing a null. */ - -$a_loop: - stq_u t0, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - EX( ldq_u t0, 0(a1) ) # e0 : - addq a1, 8, a1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t0, t8 # .. e1 (stall) - beq a2, $a_eoc # e1 : - beq t8, $a_loop # e1 : - - /* Take care of the final (partial) word store. At this point - the end-of-count bit is set in t8 iff it applies. - - On entry to this basic block we have: - t0 == the source word containing the null - t8 == the cmpbge mask that found it. */ - -$a_eos: - negq t8, t12 # e0 : find low bit set - and t8, t12, t12 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t12, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t12, t6, t8 # e0 : - unop # - zapnot t0, t8, t0 # e0 : clear src bytes > null - zap t1, t8, t1 # .. e1 : clear dst bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) - br $finish_up - - /* Add the end-of-count bit to the eos detection bitmask. */ -$a_eoc: - or t10, t8, t8 - br $a_eos - - /*** The Function Entry Point ***/ - .align 3 -__strncpy_from_user: - mov a0, v0 # save the string start - beq a2, $zerolength - - /* Are source and destination co-aligned? */ - xor a0, a1, t1 # e0 : - and a0, 7, t0 # .. e1 : find dest misalignment - and t1, 7, t1 # e0 : - addq a2, t0, a2 # .. e1 : bias count by dest misalignment - subq a2, 1, a2 # e0 : - and a2, 7, t2 # e1 : - srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 - addq zero, 1, t10 # .. e1 : - sll t10, t2, t10 # e0 : t10 = bitmask of last count byte - bne t1, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - - EX( ldq_u t1, 0(a1) ) # e0 : load first src word - addq a1, 8, a1 # .. e1 : - - beq t0, $aligned # avoid loading dest word if not needed - ldq_u t0, 0(a0) # e0 : - br $aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # e0 : load second src word - addq a1, 8, a1 # .. e1 : - mskql t0, a0, t0 # e0 : mask trailing garbage in dst - extqh t2, a1, t4 # e0 : - or t1, t4, t1 # e1 : first aligned src word complete - mskqh t1, a0, t1 # e0 : mask leading garbage in src - or t0, t1, t0 # e0 : first output word complete - or t0, t6, t6 # e1 : mask original data for zero test - cmpbge zero, t6, t8 # e0 : - beq a2, $u_eocfin # .. e1 : - bne t8, $u_final # e1 : - - lda t6, -1 # e1 : mask out the bits we have - mskql t6, a1, t6 # e0 : already seen - stq_u t0, 0(a0) # e0 : store first output word - or t6, t2, t2 # .. e1 : - cmpbge zero, t2, t8 # e0 : find nulls in second partial - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e0 : - bne t8, $u_late_head_exit # .. e1 : - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # e0 : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t8 # e1 (stall) - beq a2, $u_eoc # e1 : - bne t8, $u_eos # e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t0 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t0 # e0 : current dst word now complete - EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time - stq_u t0, -8(a0) # e0 : save the current word - mov t3, t1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t2, t8 # .. e1 : test new word for eos - beq a2, $u_eoc # e1 : - beq t8, $u_loop # e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t0 # e0 : - or t0, t1, t0 # e1 : first (partial) source word complete - - cmpbge zero, t0, t8 # e0 : is the null in this first bit? - bne t8, $u_final # .. e1 (zdb) - - stq_u t0, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e1 : - -$u_late_head_exit: - extql t2, a1, t0 # .. e0 : - cmpbge zero, t0, t8 # e0 : - or t8, t10, t6 # e1 : - cmoveq a2, t6, t8 # e0 : - nop # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ -$u_final: - negq t8, t6 # e0 : isolate low bit set - and t6, t8, t12 # e1 : - - and t12, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t6, t12, t8 # e0 : - zapnot t0, t8, t0 # .. e1 : kill source bytes > null - zap t1, t8, t1 # e0 : kill dest bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) # e0 : - br $finish_up - -$u_eoc: # end-of-count - extqh t2, a1, t0 - or t0, t1, t0 - cmpbge zero, t0, t8 - -$u_eocfin: # end-of-count, final word - or t10, t8, t8 - br $u_final - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - EX( ldq_u t1, 0(a1) ) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t12 # e1 : - extql t1, a1, t1 # .. e0 : shift src into place - lda t2, -1 # e0 : for creating masks later - beq t12, $u_head # e1 : - - mskqh t2, t5, t2 # e0 : begin src byte validity mask - cmpbge zero, t1, t8 # .. e1 : is there a zero? - extql t2, a1, t2 # e0 : - or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t2, t3 # e0 : - cmoveq a2, t5, t8 # .. e1 : - andnot t8, t3, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - negq t8, t6 # .. e1 : build bitmask of bytes <= zero - mskqh t1, t4, t1 # e0 : - and t6, t8, t12 # .. e1 : - subq t12, 1, t6 # e0 : - or t6, t12, t8 # e1 : - - zapnot t2, t8, t2 # e0 : prepare source word; mirror changes - zapnot t1, t8, t1 # .. e1 : to source validity mask - - andnot t0, t2, t0 # e0 : zero place for source to reside - or t0, t1, t0 # e1 : and put it there - stq_u t0, 0(a0) # e0 : - -$finish_up: - zapnot t0, t12, t4 # was last byte written null? - cmovne t4, 1, t4 - - and t12, 0xf0, t3 # binary search for the address of the - and t12, 0xcc, t2 # last byte written - and t12, 0xaa, t1 - bic a0, 7, t0 - cmovne t3, 4, t3 - cmovne t2, 2, t2 - cmovne t1, 1, t1 - addq t0, t3, t0 - addq t1, t2, t1 - addq t0, t1, t0 - addq t0, t4, t0 # add one if we filled the buffer - - subq t0, v0, v0 # find string length - ret - -$zerolength: - clr v0 -$exception: - ret - - .end __strncpy_from_user diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 5eecab1a84e..0c4132dd350 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr, const struct exception_table_entry *fixup; int fault, si_code = SEGV_MAPERR; siginfo_t info; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (cause > 0 ? FAULT_FLAG_WRITE : 0)); /* As of EV6, a load into $31/$f31 is a prefetch, and never faults (or is suppressed by the PALcode). Support that for older CPUs @@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto vmalloc_fault; #endif +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); - up_read(&mm->mmap_sem); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) + current->maj_flt++; + else + current->min_flt++; + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } + } + + up_read(&mm->mmap_sem); + return; /* Something tried to access memory that isn't in our memory map. @@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: + up_read(&mm->mmap_sem); if (!user_mode(regs)) goto no_context; pagefault_out_of_memory(); return; do_sigbus: + up_read(&mm->mmap_sem); /* Send a sigbus, regardless of whether we were in kernel or user mode. */ info.si_signo = SIGBUS; diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index a0a5d27aa21..b8ce18f485d 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -12,6 +12,7 @@ #include <linux/smp.h> #include <linux/errno.h> #include <asm/ptrace.h> +#include <asm/special_insns.h> #include "op_impl.h" |