diff options
Diffstat (limited to 'arch/alpha/oprofile/common.c')
| -rw-r--r-- | arch/alpha/oprofile/common.c | 189 |
1 files changed, 189 insertions, 0 deletions
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c new file mode 100644 index 00000000000..908eb4af8de --- /dev/null +++ b/arch/alpha/oprofile/common.c @@ -0,0 +1,189 @@ +/** + * @file arch/alpha/oprofile/common.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author Richard Henderson <rth@twiddle.net> + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/errno.h> +#include <asm/ptrace.h> +#include <asm/system.h> + +#include "op_impl.h" + +extern struct op_axp_model op_model_ev4 __attribute__((weak)); +extern struct op_axp_model op_model_ev5 __attribute__((weak)); +extern struct op_axp_model op_model_pca56 __attribute__((weak)); +extern struct op_axp_model op_model_ev6 __attribute__((weak)); +extern struct op_axp_model op_model_ev67 __attribute__((weak)); + +static struct op_axp_model *model; + +extern void (*perf_irq)(unsigned long, struct pt_regs *); +static void (*save_perf_irq)(unsigned long, struct pt_regs *); + +static struct op_counter_config ctr[20]; +static struct op_system_config sys; +static struct op_register_config reg; + +/* Called from do_entInt to handle the performance monitor interrupt. */ + +static void +op_handle_interrupt(unsigned long which, struct pt_regs *regs) +{ + model->handle_interrupt(which, regs, ctr); + + /* If the user has selected an interrupt frequency that is + not exactly the width of the counter, write a new value + into the counter such that it'll overflow after N more + events. */ + if ((reg.need_reset >> which) & 1) + model->reset_ctr(®, which); +} + +static int +op_axp_setup(void) +{ + unsigned long i, e; + + /* Install our interrupt handler into the existing hook. */ + save_perf_irq = perf_irq; + perf_irq = op_handle_interrupt; + + /* Compute the mask of enabled counters. */ + for (i = e = 0; i < model->num_counters; ++i) + if (ctr[i].enabled) + e |= 1 << i; + reg.enable = e; + + /* Pre-compute the values to stuff in the hardware registers. */ + model->reg_setup(®, ctr, &sys); + + /* Configure the registers on all cpus. */ + smp_call_function(model->cpu_setup, ®, 0, 1); + model->cpu_setup(®); + return 0; +} + +static void +op_axp_shutdown(void) +{ + /* Remove our interrupt handler. We may be removing this module. */ + perf_irq = save_perf_irq; +} + +static void +op_axp_cpu_start(void *dummy) +{ + wrperfmon(1, reg.enable); +} + +static int +op_axp_start(void) +{ + smp_call_function(op_axp_cpu_start, NULL, 0, 1); + op_axp_cpu_start(NULL); + return 0; +} + +static inline void +op_axp_cpu_stop(void *dummy) +{ + /* Disable performance monitoring for all counters. */ + wrperfmon(0, -1); +} + +static void +op_axp_stop(void) +{ + smp_call_function(op_axp_cpu_stop, NULL, 0, 1); + op_axp_cpu_stop(NULL); +} + +static int +op_axp_create_files(struct super_block * sb, struct dentry * root) +{ + int i; + + for (i = 0; i < model->num_counters; ++i) { + struct dentry *dir; + char buf[3]; + + snprintf(buf, sizeof buf, "%d", i); + dir = oprofilefs_mkdir(sb, root, buf); + + oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); + oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); + oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); + /* Dummies. */ + oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); + oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); + oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); + } + + if (model->can_set_proc_mode) { + oprofilefs_create_ulong(sb, root, "enable_pal", + &sys.enable_pal); + oprofilefs_create_ulong(sb, root, "enable_kernel", + &sys.enable_kernel); + oprofilefs_create_ulong(sb, root, "enable_user", + &sys.enable_user); + } + + return 0; +} + +int __init +oprofile_arch_init(struct oprofile_operations *ops) +{ + struct op_axp_model *lmodel = NULL; + + switch (implver()) { + case IMPLVER_EV4: + lmodel = &op_model_ev4; + break; + case IMPLVER_EV5: + /* 21164PC has a slightly different set of events. + Recognize the chip by the presence of the MAX insns. */ + if (!amask(AMASK_MAX)) + lmodel = &op_model_pca56; + else + lmodel = &op_model_ev5; + break; + case IMPLVER_EV6: + /* 21264A supports ProfileMe. + Recognize the chip by the presence of the CIX insns. */ + if (!amask(AMASK_CIX)) + lmodel = &op_model_ev67; + else + lmodel = &op_model_ev6; + break; + } + + if (!lmodel) + return -ENODEV; + model = lmodel; + + ops->create_files = op_axp_create_files; + ops->setup = op_axp_setup; + ops->shutdown = op_axp_shutdown; + ops->start = op_axp_start; + ops->stop = op_axp_stop; + ops->cpu_type = lmodel->cpu_type; + + printk(KERN_INFO "oprofile: using %s performance monitoring.\n", + lmodel->cpu_type); + + return 0; +} + + +void +oprofile_arch_exit(void) +{ +} |