diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/networking/stmmac.txt | 29 |
1 files changed, 25 insertions, 4 deletions
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index d0aeeadd264..ab1e8d7004c 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -111,11 +111,12 @@ and detailed below as well: int phy_addr; int interface; struct stmmac_mdio_bus_data *mdio_bus_data; - int pbl; + struct stmmac_dma_cfg *dma_cfg; int clk_csr; int has_gmac; int enh_desc; int tx_coe; + int rx_coe; int bugged_jumbo; int pmt; int force_sf_dma_mode; @@ -136,10 +137,12 @@ Where: o pbl: the Programmable Burst Length is maximum number of beats to be transferred in one DMA transaction. GMAC also enables the 4xPBL by default. - o clk_csr: CSR Clock range selection. + o clk_csr: fixed CSR Clock range selection. o has_gmac: uses the GMAC core. o enh_desc: if sets the MAC will use the enhanced descriptor structure. o tx_coe: core is able to perform the tx csum in HW. + o rx_coe: the supports three check sum offloading engine types: + type_1, type_2 (full csum) and no RX coe. o bugged_jumbo: some HWs are not able to perform the csum in HW for over-sized frames due to limited buffer sizes. Setting this flag the csum will be done in SW on @@ -160,7 +163,7 @@ Where: o custom_cfg: this is a custom configuration that can be passed while initialising the resources. -The we have: +For MDIO bus The we have: struct stmmac_mdio_bus_data { int bus_id; @@ -177,10 +180,28 @@ Where: o irqs: list of IRQs, one per PHY. o probed_phy_irq: if irqs is NULL, use this for probed PHY. + +For DMA engine we have the following internal fields that should be +tuned according to the HW capabilities. + +struct stmmac_dma_cfg { + int pbl; + int fixed_burst; + int burst_len_supported; +}; + +Where: + o pbl: Programmable Burst Length + o fixed_burst: program the DMA to use the fixed burst mode + o burst_len: this is the value we put in the register + supported values are provided as macros in + linux/stmmac.h header file. + +--- + Below an example how the structures above are using on ST platforms. static struct plat_stmmacenet_data stxYYY_ethernet_platform_data = { - .pbl = 32, .has_gmac = 0, .enh_desc = 0, .fix_mac_speed = stxYYY_ethernet_fix_mac_speed, |