diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/DocBook/mtdnand.tmpl | 3 | ||||
| -rw-r--r-- | Documentation/RCU/trace.txt | 17 | ||||
| -rw-r--r-- | Documentation/acpi/method-customizing.txt | 5 | ||||
| -rw-r--r-- | Documentation/arm/Booting | 33 | ||||
| -rw-r--r-- | Documentation/arm/Samsung/Overview.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/booting-without-of.txt | 48 | ||||
| -rw-r--r-- | Documentation/dmaengine.txt | 97 | ||||
| -rw-r--r-- | Documentation/feature-removal-schedule.txt | 36 | ||||
| -rw-r--r-- | Documentation/filesystems/Locking | 4 | ||||
| -rw-r--r-- | Documentation/filesystems/vfs.txt | 2 | ||||
| -rw-r--r-- | Documentation/kernel-parameters.txt | 5 | ||||
| -rw-r--r-- | Documentation/laptops/acer-wmi.txt | 184 | ||||
| -rw-r--r-- | Documentation/lockstat.txt | 36 | ||||
| -rw-r--r-- | Documentation/scsi/ChangeLog.megaraid_sas | 14 | ||||
| -rw-r--r-- | Documentation/virtual/lguest/Makefile | 2 | ||||
| -rw-r--r-- | Documentation/virtual/lguest/lguest.c | 22 |
16 files changed, 274 insertions, 236 deletions
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 6f242d5dee9..17910e2052a 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -189,8 +189,7 @@ static void __iomem *baseaddr; <title>Partition defines</title> <para> If you want to divide your device into partitions, then - enable the configuration switch CONFIG_MTD_PARTITIONS and define - a partitioning scheme suitable to your board. + define a partitioning scheme suitable to your board. </para> <programlisting> #define NUM_PARTITIONS 2 diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index c078ad48f7a..8173cec473a 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -99,18 +99,11 @@ o "qp" indicates that RCU still expects a quiescent state from o "dt" is the current value of the dyntick counter that is incremented when entering or leaving dynticks idle state, either by the - scheduler or by irq. The number after the "/" is the interrupt - nesting depth when in dyntick-idle state, or one greater than - the interrupt-nesting depth otherwise. - - This field is displayed only for CONFIG_NO_HZ kernels. - -o "dn" is the current value of the dyntick counter that is incremented - when entering or leaving dynticks idle state via NMI. If both - the "dt" and "dn" values are even, then this CPU is in dynticks - idle mode and may be ignored by RCU. If either of these two - counters is odd, then RCU must be alert to the possibility of - an RCU read-side critical section running on this CPU. + scheduler or by irq. This number is even if the CPU is in + dyntick idle mode and odd otherwise. The number after the first + "/" is the interrupt nesting depth when in dyntick-idle state, + or one greater than the interrupt-nesting depth otherwise. + The number after the second "/" is the NMI nesting depth. This field is displayed only for CONFIG_NO_HZ kernels. diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt index 3e1d25aee3f..5f55373dd53 100644 --- a/Documentation/acpi/method-customizing.txt +++ b/Documentation/acpi/method-customizing.txt @@ -66,3 +66,8 @@ Note: We can use a kernel with multiple custom ACPI method running, But each individual write to debugfs can implement a SINGLE method override. i.e. if we want to insert/override multiple ACPI methods, we need to redo step c) ~ g) for multiple times. + +Note: Be aware that root can mis-use this driver to modify arbitrary + memory and gain additional rights, if root's privileges got + restricted (for example if root is not allowed to load additional + modules after boot). diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 76850295af8..4e686a2ed91 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -65,13 +65,19 @@ looks at the connected hardware is beyond the scope of this document. The boot loader must ultimately be able to provide a MACH_TYPE_xxx value to the kernel. (see linux/arch/arm/tools/mach-types). - -4. Setup the kernel tagged list -------------------------------- +4. Setup boot data +------------------ Existing boot loaders: OPTIONAL, HIGHLY RECOMMENDED New boot loaders: MANDATORY +The boot loader must provide either a tagged list or a dtb image for +passing configuration data to the kernel. The physical address of the +boot data is passed to the kernel in register r2. + +4a. Setup the kernel tagged list +-------------------------------- + The boot loader must create and initialise the kernel tagged list. A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE. The ATAG_CORE tag may or may not be empty. An empty ATAG_CORE tag @@ -101,6 +107,24 @@ The tagged list must be placed in a region of memory where neither the kernel decompressor nor initrd 'bootp' program will overwrite it. The recommended placement is in the first 16KiB of RAM. +4b. Setup the device tree +------------------------- + +The boot loader must load a device tree image (dtb) into system ram +at a 64bit aligned address and initialize it with the boot data. The +dtb format is documented in Documentation/devicetree/booting-without-of.txt. +The kernel will look for the dtb magic value of 0xd00dfeed at the dtb +physical address to determine if a dtb has been passed instead of a +tagged list. + +The boot loader must pass at a minimum the size and location of the +system memory, and the root filesystem location. The dtb must be +placed in a region of memory where the kernel decompressor will not +overwrite it. The recommended placement is in the first 16KiB of RAM +with the caveat that it may not be located at physical address 0 since +the kernel interprets a value of 0 in r2 to mean neither a tagged list +nor a dtb were passed. + 5. Calling the kernel image --------------------------- @@ -125,7 +149,8 @@ In either case, the following conditions must be met: - CPU register settings r0 = 0, r1 = machine type number discovered in (3) above. - r2 = physical address of tagged list in system RAM. + r2 = physical address of tagged list in system RAM, or + physical address of device tree block (dtb) in system RAM - CPU mode All forms of interrupts must be disabled (IRQs and FIQs) diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt index c3094ea51aa..658abb258ce 100644 --- a/Documentation/arm/Samsung/Overview.txt +++ b/Documentation/arm/Samsung/Overview.txt @@ -14,7 +14,6 @@ Introduction - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list - S3C64XX: S3C6400 and S3C6410 - S5P6440 - - S5P6442 - S5PC100 - S5PC110 / S5PV210 @@ -36,7 +35,6 @@ Configuration unifying all the SoCs into one kernel. s5p6440_defconfig - S5P6440 specific default configuration - s5p6442_defconfig - S5P6442 specific default configuration s5pc100_defconfig - S5PC100 specific default configuration s5pc110_defconfig - S5PC110 specific default configuration s5pv210_defconfig - S5PV210 specific default configuration diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 50619a0720a..7c1329de059 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -12,8 +12,9 @@ Table of Contents ================= I - Introduction - 1) Entry point for arch/powerpc - 2) Entry point for arch/x86 + 1) Entry point for arch/arm + 2) Entry point for arch/powerpc + 3) Entry point for arch/x86 II - The DT block format 1) Header @@ -148,7 +149,46 @@ upgrades without significantly impacting the kernel code or cluttering it with special cases. -1) Entry point for arch/powerpc +1) Entry point for arch/arm +--------------------------- + + There is one single entry point to the kernel, at the start + of the kernel image. That entry point supports two calling + conventions. A summary of the interface is described here. A full + description of the boot requirements is documented in + Documentation/arm/Booting + + a) ATAGS interface. Minimal information is passed from firmware + to the kernel with a tagged list of predefined parameters. + + r0 : 0 + + r1 : Machine type number + + r2 : Physical address of tagged list in system RAM + + b) Entry with a flattened device-tree block. Firmware loads the + physical address of the flattened device tree block (dtb) into r2, + r1 is not used, but it is considered good practise to use a valid + machine number as described in Documentation/arm/Booting. + + r0 : 0 + + r1 : Valid machine type number. When using a device tree, + a single machine type number will often be assigned to + represent a class or family of SoCs. + + r2 : physical pointer to the device-tree block + (defined in chapter II) in RAM. Device tree can be located + anywhere in system RAM, but it should be aligned on a 64 bit + boundary. + + The kernel will differentiate between ATAGS and device tree booting by + reading the memory pointed to by r2 and looking for either the flattened + device tree block magic value (0xd00dfeed) or the ATAG_CORE value at + offset 0x4 from r2 (0x54410001). + +2) Entry point for arch/powerpc ------------------------------- There is one single entry point to the kernel, at the start @@ -226,7 +266,7 @@ it with special cases. cannot support both configurations with Book E and configurations with classic Powerpc architectures. -2) Entry point for arch/x86 +3) Entry point for arch/x86 ------------------------------- There is one single 32bit entry point to the kernel at code32_start, diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index 0c1c2f63c0a..5a0cb1ef616 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt @@ -1 +1,96 @@ -See Documentation/crypto/async-tx-api.txt + DMA Engine API Guide + ==================== + + Vinod Koul <vinod dot koul at intel.com> + +NOTE: For DMA Engine usage in async_tx please see: + Documentation/crypto/async-tx-api.txt + + +Below is a guide to device driver writers on how to use the Slave-DMA API of the +DMA Engine. This is applicable only for slave DMA usage only. + +The slave DMA usage consists of following steps +1. Allocate a DMA slave channel +2. Set slave and controller specific parameters +3. Get a descriptor for transaction +4. Submit the transaction and wait for callback notification + +1. Allocate a DMA slave channel +Channel allocation is slightly different in the slave DMA context, client +drivers typically need a channel from a particular DMA controller only and even +in some cases a specific channel is desired. To request a channel +dma_request_channel() API is used. + +Interface: +struct dma_chan *dma_request_channel(dma_cap_mask_t mask, + dma_filter_fn filter_fn, + void *filter_param); +where dma_filter_fn is defined as: +typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param); + +When the optional 'filter_fn' parameter is set to NULL dma_request_channel +simply returns the first channel that satisfies the capability mask. Otherwise, +when the mask parameter is insufficient for specifying the necessary channel, +the filter_fn routine can be used to disposition the available channels in the +system. The filter_fn routine is called once for each free channel in the +system. Upon seeing a suitable channel filter_fn returns DMA_ACK which flags +that channel to be the return value from dma_request_channel. A channel +allocated via this interface is exclusive to the caller, until +dma_release_channel() is called. + +2. Set slave and controller specific parameters +Next step is always to pass some specific information to the DMA driver. Most of +the generic information which a slave DMA can use is in struct dma_slave_config. +It allows the clients to specify DMA direction, DMA addresses, bus widths, DMA +burst lengths etc. If some DMA controllers have more parameters to be sent then +they should try to embed struct dma_slave_config in their controller specific +structure. That gives flexibility to client to pass more parameters, if +required. + +Interface: +int dmaengine_slave_config(struct dma_chan *chan, + struct dma_slave_config *config) + +3. Get a descriptor for transaction +For slave usage the various modes of slave transfers supported by the +DMA-engine are: +slave_sg - DMA a list of scatter gather buffers from/to a peripheral +dma_cyclic - Perform a cyclic DMA operation from/to a peripheral till the + operation is explicitly stopped. +The non NULL return of this transfer API represents a "descriptor" for the given +transaction. + +Interface: +struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_sg)( + struct dma_chan *chan, + struct scatterlist *dst_sg, unsigned int dst_nents, + struct scatterlist *src_sg, unsigned int src_nents, + unsigned long flags); +struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_cyclic)( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_data_direction direction); + +4. Submit the transaction and wait for callback notification +To schedule the transaction to be scheduled by dma device, the "descriptor" +returned in above (3) needs to be submitted. +To tell the dma driver that a transaction is ready to be serviced, the +descriptor->submit() callback needs to be invoked. This chains the descriptor to +the pending queue. +The transactions in the pending queue can be activated by calling the +issue_pending API. If channel is idle then the first transaction in queue is +started and subsequent ones queued up. +On completion of the DMA operation the next in queue is submitted and a tasklet +triggered. The tasklet would then call the client driver completion callback +routine for notification, if set. +Interface: +void dma_async_issue_pending(struct dma_chan *chan); + +============================================================================== + +Additional usage notes for dma driver writers +1/ Although DMA engine specifies that completion callback routines cannot submit +any new operations, but typically for slave DMA subsequent transaction may not +be available for submit prior to callback routine being called. This requirement +is not a requirement for DMA-slave devices. But they should take care to drop +the spin-lock they might be holding before calling the callback routine diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index ff31b1cc50a..1a9446b5915 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -6,6 +6,42 @@ be removed from this file. --------------------------- +What: x86 floppy disable_hlt +When: 2012 +Why: ancient workaround of dubious utility clutters the + code used by everybody else. +Who: Len Brown <len.brown@intel.com> + +--------------------------- + +What: CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle +When: 2012 +Why: This optional sub-feature of APM is of dubious reliability, + and ancient APM laptops are likely better served by calling HLT. + Deleting CONFIG_APM_CPU_IDLE allows x86 to stop exporting + the pm_idle function pointer to modules. +Who: Len Brown <len.brown@intel.com> + +---------------------------- + +What: x86_32 "no-hlt" cmdline param +When: 2012 +Why: remove a branch from idle path, simplify code used by everybody. + This option disabled the use of HLT in idle and machine_halt() + for hardware that was flakey 15-years ago. Today we have + "idle=poll" that removed HLT from idle, and so if such a machine + is still running the upstream kernel, "idle=poll" is likely sufficient. +Who: Len Brown <len.brown@intel.com> + +---------------------------- + +What: x86 "idle=mwait" cmdline param +When: 2012 +Why: simplify x86 idle code +Who: Len Brown <len.brown@intel.com> + +---------------------------- + What: PRISM54 When: 2.6.34 diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 61b31acb917..57d827d6071 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -104,7 +104,7 @@ of the locking scheme for directory operations. prototypes: struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); - void (*dirty_inode) (struct inode *); + void (*dirty_inode) (struct inode *, int flags); int (*write_inode) (struct inode *, struct writeback_control *wbc); int (*drop_inode) (struct inode *); void (*evict_inode) (struct inode *); @@ -126,7 +126,7 @@ locking rules: s_umount alloc_inode: destroy_inode: -dirty_inode: (must not sleep) +dirty_inode: write_inode: drop_inode: !!!inode->i_lock!!! evict_inode: diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 21a7dc467bb..88b9f5519af 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -211,7 +211,7 @@ struct super_operations { struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); - void (*dirty_inode) (struct inode *); + void (*dirty_inode) (struct inode *, int flags); int (*write_inode) (struct inode *, int); void (*drop_inode) (struct inode *); void (*delete_inode) (struct inode *); diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 5438a2d7907..d9a203b058f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -999,7 +999,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. With this option on every unmap_single operation will result in a hardware IOTLB flush operation as opposed to batching them for performance. - + sp_off [Default Off] + By default, super page will be supported if Intel IOMMU + has the capability. With this option, super page will + not be supported. intremap= [X86-64, Intel-IOMMU] Format: { on (default) | off | nosid } on enable Interrupt Remapping (default) diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt deleted file mode 100644 index 4beafa663dd..00000000000 --- a/Documentation/laptops/acer-wmi.txt +++ /dev/null @@ -1,184 +0,0 @@ -Acer Laptop WMI Extras Driver -http://code.google.com/p/aceracpi -Version 0.3 -4th April 2009 - -Copyright 2007-2009 Carlos Corbacho <carlos@strangeworlds.co.uk> - -acer-wmi is a driver to allow you to control various parts of your Acer laptop -hardware under Linux which are exposed via ACPI-WMI. - -This driver completely replaces the old out-of-tree acer_acpi, which I am -currently maintaining for bug fixes only on pre-2.6.25 kernels. All development -work is now focused solely on acer-wmi. - -Disclaimer -********** - -Acer and Wistron have provided nothing towards the development acer_acpi or -acer-wmi. All information we have has been through the efforts of the developers -and the users to discover as much as possible about the hardware. - -As such, I do warn that this could break your hardware - this is extremely -unlikely of course, but please bear this in mind. - -Background -********** - -acer-wmi is derived from acer_acpi, originally developed by Mark -Smith in 2005, then taken over by Carlos Corbacho in 2007, in order to activate -the wireless LAN card under a 64-bit version of Linux, as acerhk[1] (the -previous solution to the problem) relied on making 32 bit BIOS calls which are -not possible in kernel space from a 64 bit OS. - -[1] acerhk: http://www.cakey.de/acerhk/ - -Supported Hardware -****************** - -NOTE: The Acer Aspire One is not supported hardware. It cannot work with -acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been -blacklisted until that happens. - -Please see the website for the current list of known working hardware: - -http://code.google.com/p/aceracpi/wiki/SupportedHardware - -If your laptop is not listed, or listed as unknown, and works with acer-wmi, -please contact me with a copy of the DSDT. - -If your Acer laptop doesn't work with acer-wmi, I would also like to see the -DSDT. - -To send me the DSDT, as root/sudo: - -cat /sys/firmware/acpi/tables/DSDT > dsdt - -And send me the resulting 'dsdt' file. - -Usage -***** - -On Acer laptops, acer-wmi should already be autoloaded based on DMI matching. -For non-Acer laptops, until WMI based autoloading support is added, you will -need to manually load acer-wmi. - -acer-wmi creates /sys/devices/platform/acer-wmi, and fills it with various -files whose usage is detailed below, which enables you to control some of the -following (varies between models): - -* the wireless LAN card radio -* inbuilt Bluetooth adapter -* inbuilt 3G card -* mail LED of your laptop -* brightness of the LCD panel - -Wireless -******** - -With regards to wireless, all acer-wmi does is enable the radio on the card. It -is not responsible for the wireless LED - once the radio is enabled, this is -down to the wireless driver for your card. So the behaviour of the wireless LED, -once you enable the radio, will depend on your hardware and driver combination. - -e.g. With the BCM4318 on the Acer Aspire 5020 series: - -ndiswrapper: Light blinks on when transmitting -b43: Solid light, blinks off when transmitting - -Wireless radio control is unconditionally enabled - all Acer laptops that support -acer-wmi come with built-in wireless. However, should you feel so inclined to -ever wish to remove the card, or swap it out at some point, please get in touch -with me, as we may well be able to gain some data on wireless card detection. - -The wireless radio is exposed through rfkill. - -Bluetooth -********* - -For bluetooth, this is an internal USB dongle, so once enabled, you will get -a USB device connection event, and a new USB device appears. When you disable -bluetooth, you get the reverse - a USB device disconnect event, followed by the -device disappearing again. - -Bluetooth is autodetected by acer-wmi, so if you do not have a bluetooth module -installed in your laptop, this file won't exist (please be aware that it is -quite common for Acer not to fit bluetooth to their laptops - so just because -you have a bluetooth button on the laptop, doesn't mean that bluetooth is -installed). - -For the adventurously minded - if you want to buy an internal bluetooth -module off the internet that is compatible with your laptop and fit it, then -it will work just fine with acer-wmi. - -Bluetooth is exposed through rfkill. - -3G -** - -3G is currently not autodetected, so the 'threeg' file is always created under -sysfs. So far, no-one in possession of an Acer laptop with 3G built-in appears to -have tried Linux, or reported back, so we don't have any information on this. - -If you have an Acer laptop that does have a 3G card in, please contact me so we -can properly detect these, and find out a bit more about them. - -To read the status of the 3G card (0=off, 1=on): -cat /sys/devices/platform/acer-wmi/threeg - -To enable the 3G card: -echo 1 > /sys/devices/platform/acer-wmi/threeg - -To disable the 3G card: -echo 0 > /sys/devices/platform/acer-wmi/threeg - -To set the state of the 3G card when loading acer-wmi, pass: -threeg=X (where X is 0 or 1) - -Mail LED -******** - -This can be found in most older Acer laptops supported by acer-wmi, and many -newer ones - it is built into the 'mail' button, and blinks when active. - -On newer (WMID) laptops though, we have no way of detecting the mail LED. If -your laptop identifies itself in dmesg as a WMID model, then please try loading -acer_acpi with: - -force_series=2490 - -This will use a known alternative method of reading/ writing the mail LED. If -it works, please report back to me with the DMI data from your laptop so this -can be added to acer-wmi. - -The LED is exposed through the LED subsystem, and can be found in: - -/sys/devices/platform/acer-wmi/leds/acer-wmi::mail/ - -The mail LED is autodetected, so if you don't have one, the LED device won't -be registered. - -Backlight -********* - -The backlight brightness control is available on all acer-wmi supported -hardware. The maximum brightness level is usually 15, but on some newer laptops -it's 10 (this is again autodetected). - -The backlight is exposed through the backlight subsystem, and can be found in: - -/sys/devices/platform/acer-wmi/backlight/acer-wmi/ - -Credits -******* - -Olaf Tauber, who did the real hard work when he developed acerhk -http://www.cakey.de/acerhk/ -All the authors of laptop ACPI modules in the kernel, whose work -was an inspiration in the early days of acer_acpi -Mathieu Segaud, who solved the problem with having to modprobe the driver -twice in acer_acpi 0.2. -Jim Ramsay, who added support for the WMID interface -Mark Smith, who started the original acer_acpi - -And the many people who have used both acer_acpi and acer-wmi. diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt index 9c0a80d17a2..cef00d42ed5 100644 --- a/Documentation/lockstat.txt +++ b/Documentation/lockstat.txt @@ -12,8 +12,9 @@ Because things like lock contention can severely impact performance. - HOW Lockdep already has hooks in the lock functions and maps lock instances to -lock classes. We build on that. The graph below shows the relation between -the lock functions and the various hooks therein. +lock classes. We build on that (see Documentation/lockdep-design.txt). +The graph below shows the relation between the lock functions and the various +hooks therein. __acquire | @@ -128,6 +129,37 @@ points are the points we're contending with. The integer part of the time values is in us. +Dealing with nested locks, subclasses may appear: + +32............................................................................................................................................................................................... +33 +34 &rq->lock: 13128 13128 0.43 190.53 103881.26 97454 3453404 0.00 401.11 13224683.11 +35 --------- +36 &rq->lock 645 [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75 +37 &rq->lock 297 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a +38 &rq->lock 360 [<ffffffff8103c4c5>] select_task_rq_fair+0x1f0/0x74a +39 &rq->lock 428 [<ffffffff81045f98>] scheduler_tick+0x46/0x1fb +40 --------- +41 &rq->lock 77 [<ffffffff8103bfc4>] task_rq_lock+0x43/0x75 +42 &rq->lock 174 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a +43 &rq->lock 4715 [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54 +44 &rq->lock 893 [<ffffffff81340524>] schedule+0x157/0x7b8 +45 +46............................................................................................................................................................................................... +47 +48 &rq->lock/1: 11526 11488 0.33 388.73 136294.31 21461 38404 0.00 37.93 109388.53 +49 ----------- +50 &rq->lock/1 11526 [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54 +51 ----------- +52 &rq->lock/1 5645 [<ffffffff8103ed4b>] double_rq_lock+0x42/0x54 +53 &rq->lock/1 1224 [<ffffffff81340524>] schedule+0x157/0x7b8 +54 &rq->lock/1 4336 [<ffffffff8103ed58>] double_rq_lock+0x4f/0x54 +55 &rq->lock/1 181 [<ffffffff8104ba65>] try_to_wake_up+0x127/0x25a + +Line 48 shows statistics for the second subclass (/1) of &rq->lock class +(subclass starts from 0), since in this case, as line 50 suggests, +double_rq_lock actually acquires a nested lock of two spinlocks. + View the top contending locks: # grep : /proc/lock_stat | head diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 4d9ce73ff73..9ed1d9d9678 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,17 @@ +Release Date : Wed. May 11, 2011 17:00:00 PST 2010 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford +Current Version : 00.00.05.38-rc1 +Old Version : 00.00.05.34-rc1 + 1. Remove MSI-X black list, use MFI_REG_STATE.ready.msiEnable. + 2. Remove un-used function megasas_return_cmd_for_smid(). + 3. Check MFI_REG_STATE.fault.resetAdapter in megasas_reset_fusion(). + 4. Disable interrupts/free_irq() in megasas_shutdown(). + 5. Fix bug where AENs could be lost in probe() and resume(). + 6. Convert 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath + IO. + 7. Add 1078 OCR support. +------------------------------------------------------------------------------- Release Date : Thu. Feb 24, 2011 17:00:00 PST 2010 - (emaild-id:megaraidlinux@lsi.com) Adam Radford diff --git a/Documentation/virtual/lguest/Makefile b/Documentation/virtual/lguest/Makefile index bebac6b4f33..0ac34206f7a 100644 --- a/Documentation/virtual/lguest/Makefile +++ b/Documentation/virtual/lguest/Makefile @@ -1,5 +1,5 @@ # This creates the demonstration utility "lguest" which runs a Linux guest. -# Missing headers? Add "-I../../include -I../../arch/x86/include" +# Missing headers? Add "-I../../../include -I../../../arch/x86/include" CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE all: lguest diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c index d9da7e14853..cd9d6af61d0 100644 --- a/Documentation/virtual/lguest/lguest.c +++ b/Documentation/virtual/lguest/lguest.c @@ -49,7 +49,7 @@ #include <linux/virtio_rng.h> #include <linux/virtio_ring.h> #include <asm/bootparam.h> -#include "../../include/linux/lguest_launcher.h" +#include "../../../include/linux/lguest_launcher.h" /*L:110 * We can ignore the 42 include files we need for this program, but I do want * to draw attention to the use of kernel-style types. @@ -135,9 +135,6 @@ struct device { /* Is it operational */ bool running; - /* Does Guest want an intrrupt on empty? */ - bool irq_on_empty; - /* Device-specific data. */ void *priv; }; @@ -637,10 +634,7 @@ static void trigger_irq(struct virtqueue *vq) /* If they don't want an interrupt, don't send one... */ if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) { - /* ... unless they've asked us to force one on empty. */ - if (!vq->dev->irq_on_empty - || lg_last_avail(vq) != vq->vring.avail->idx) - return; + return; } /* Send the Guest an interrupt tell them we used something up. */ @@ -1057,15 +1051,6 @@ static void create_thread(struct virtqueue *vq) close(vq->eventfd); } -static bool accepted_feature(struct device *dev, unsigned int bit) -{ - const u8 *features = get_feature_bits(dev) + dev->feature_len; - - if (dev->feature_len < bit / CHAR_BIT) - return false; - return features[bit / CHAR_BIT] & (1 << (bit % CHAR_BIT)); -} - static void start_device(struct device *dev) { unsigned int i; @@ -1079,8 +1064,6 @@ static void start_device(struct device *dev) verbose(" %02x", get_feature_bits(dev) [dev->feature_len+i]); - dev->irq_on_empty = accepted_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY); - for (vq = dev->vq; vq; vq = vq->next) { if (vq->service) create_thread(vq); @@ -1564,7 +1547,6 @@ static void setup_tun_net(char *arg) /* Set up the tun device. */ configure_device(ipfd, tapif, ip); - add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY); /* Expect Guest to handle everything except UFO */ add_feature(dev, VIRTIO_NET_F_CSUM); add_feature(dev, VIRTIO_NET_F_GUEST_CSUM); |