diff options
Diffstat (limited to 'Documentation/x86/boot.txt')
| -rw-r--r-- | Documentation/x86/boot.txt | 41 |
1 files changed, 41 insertions, 0 deletions
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 7c3a8801b7c..c6539a4278b 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -54,6 +54,9 @@ Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment beyond the kernel_alignment added, new init_size and pref_address fields. Added extended boot loader IDs. +Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover + protocol entry point. + **** MEMORY LAYOUT The traditional memory map for the kernel loader, used for Image or @@ -189,6 +192,7 @@ Offset Proto Name Meaning of struct setup_data 0258/8 2.10+ pref_address Preferred loading address 0260/4 2.10+ init_size Linear memory required during initialization +0264/4 2.11+ handover_offset Offset of handover entry point (1) For backwards compatibility, if the setup_sects field contains 0, the real value is 4. @@ -690,6 +694,16 @@ Offset/size: 0x260/4 else runtime_start = pref_address +Field name: handover_offset +Type: read +Offset/size: 0x264/4 + + This field is the offset from the beginning of the kernel image to + the EFI handover protocol entry point. Boot loaders using the EFI + handover protocol to boot the kernel should jump to this offset. + + See EFI HANDOVER PROTOCOL below for more details. + **** THE IMAGE CHECKSUM @@ -1010,3 +1024,30 @@ segment; __BOOS_CS must have execute/read permission, and __BOOT_DS must have read/write permission; CS must be __BOOT_CS and DS, ES, SS must be __BOOT_DS; interrupt must be disabled; %esi must hold the base address of the struct boot_params; %ebp, %edi and %ebx must be zero. + +**** EFI HANDOVER PROTOCOL + +This protocol allows boot loaders to defer initialisation to the EFI +boot stub. The boot loader is required to load the kernel/initrd(s) +from the boot media and jump to the EFI handover protocol entry point +which is hdr->handover_offset bytes from the beginning of +startup_{32,64}. + +The function prototype for the handover entry point looks like this, + + efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp) + +'handle' is the EFI image handle passed to the boot loader by the EFI +firmware, 'table' is the EFI system table - these are the first two +arguments of the "handoff state" as described in section 2.3 of the +UEFI specification. 'bp' is the boot loader-allocated boot params. + +The boot loader *must* fill out the following fields in bp, + + o hdr.code32_start + o hdr.cmd_line_ptr + o hdr.cmdline_size + o hdr.ramdisk_image (if applicable) + o hdr.ramdisk_size (if applicable) + +All other fields should be zero. |