6 files changed, 16 insertions, 36 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index e6b57dd46a4..138673a907f 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -57,11 +57,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 		- Default: 1
 		- For auto-loading more than one card, specify this
 		  option together with snd-card-X aliases.
-    device_mode
-		- permission mask for dynamic sound device filesystem
-		- This is available only when DEVFS is enabled
-		- Default: 0666
-		- E.g.: device_mode=0660
 
   
   Module snd-pcm-oss
@@ -1268,8 +1263,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Note: on some notebooks the buffer address cannot be detected
     automatically, or causes hang-up during initialization.
-    In such a case, specify the buffer top address explicity via
-    buffer_top option.
+    In such a case, specify the buffer top address explicitly via
+    the buffer_top option.
     For example,
       Sony F250: buffer_top=0x25a800
       Sony F270: buffer_top=0x272800
@@ -1887,7 +1882,7 @@ options snd-ens1371 index=1
 # OSS/Free portion
 alias sound-slot-0 snd-interwave
 alias sound-slot-1 snd-ens1371
------ /etc/moprobe.conf
+----- /etc/modprobe.conf
 
 In this example, the interwave card is always loaded as the first card
 (index 0) and ens1371 as the second (index 1).
@@ -1915,21 +1910,6 @@ Please note that the device mapping above may be varied via the module
 options of snd-pcm-oss module.
 
 
-DEVFS support
-=============
-
-The ALSA driver fully supports the devfs extension.
-You should add lines below to your devfsd.conf file:
-
-LOOKUP snd MODLOAD ACTION snd
-REGISTER ^sound/.* PERMISSIONS root.audio 660
-REGISTER ^snd/.* PERMISSIONS root.audio 660
-
-Warning: These lines assume that you have the audio group in your system.
-         Otherwise replace audio word with another group name (root for
-         example).
-
-
 Proc interfaces (/proc/asound)
 ==============================
 
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index b535c2a198f..e40cce83327 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -126,7 +126,7 @@ Here is a list of supported device_setup values for this device:
    - Alsa driver default mode
    - maintains backward compatibility with setups that do not use this 
      parameter by not introducing any change
-   - results sometimes in corrupted sound as decribed earlier
+   - results sometimes in corrupted sound as described earlier
  * device_setup=0x01
    - 16bits 48kHz mode with Di disabled
    - Ai,Ao,Do can be used at the same time
diff --git a/Documentation/sound/alsa/CMIPCI.txt b/Documentation/sound/alsa/CMIPCI.txt
index 1872e24442a..4b2b1538705 100644
--- a/Documentation/sound/alsa/CMIPCI.txt
+++ b/Documentation/sound/alsa/CMIPCI.txt
@@ -16,11 +16,11 @@ As default, ALSA driver assigns the first PCM device (i.e. hw:0,0 for
 card#0) for front and 4/6ch playbacks, while the second PCM device
 (hw:0,1) is assigned to the second DAC for rear playback.
 
-There are slight difference between two DACs.
+There are slight differences between the two DACs:
 
 - The first DAC supports U8 and S16LE formats, while the second DAC
   supports only S16LE.
-- The seconde DAC supports only two channel stereo.
+- The second DAC supports only two channel stereo.
 
 Please note that the CM8x38 DAC doesn't support continuous playback
 rate but only fixed rates: 5512, 8000, 11025, 16000, 22050, 32000,
@@ -76,7 +76,7 @@ in alsa-lib.  For example, you can play a WAV file with 6 channels like
 
 	% aplay -Dsurround51 sixchannels.wav
 
-For programmin the 4/6 channel playback, you need to specify the PCM
+For programming the 4/6 channel playback, you need to specify the PCM
 channels as you like and set the format S16LE.  For example, for playback
 with 4 channels,
 
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 4807ef79a94..077fbe25ebf 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -5486,7 +5486,7 @@ struct _snd_pcm_runtime {
   <chapter id="power-management">
     <title>Power Management</title>
     <para>
-      If the chip is supposed to work with with suspend/resume
+      If the chip is supposed to work with suspend/resume
       functions, you need to add the power-management codes to the
       driver. The additional codes for the power-management should be
       <function>ifdef</function>'ed with
diff --git a/Documentation/sound/alsa/MIXART.txt b/Documentation/sound/alsa/MIXART.txt
index 5cb97061287..ef42c44fa1f 100644
--- a/Documentation/sound/alsa/MIXART.txt
+++ b/Documentation/sound/alsa/MIXART.txt
@@ -31,7 +31,7 @@ With a miXart8AES/EBU there is in addition 1 stereo digital input
 Formats
 -------
 U8, S16_LE, S16_BE, S24_3LE, S24_3BE, FLOAT_LE, FLOAT_BE
-Sample rates : 8000 - 48000 Hz continously
+Sample rates : 8000 - 48000 Hz continuously
 
 Playback
 --------
@@ -39,7 +39,7 @@ For instance the playback devices are configured to have max. 4
 substreams performing hardware mixing. This could be changed to a
 maximum of 24 substreams if wished.
 Mono files will be played on the left and right channel. Each channel
-can be muted for each stream to use 8 analog/digital outputs seperately.
+can be muted for each stream to use 8 analog/digital outputs separately.
 
 Capture
 -------
@@ -97,4 +97,4 @@ COPYRIGHT
 =========
 
 Copyright (c) 2003 Digigram SA <alsa@digigram.com>
-Distributalbe under GPL.
+Distributable under GPL.
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 1fe48846d78..f738b296440 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -71,7 +71,7 @@ The status of MIDI I/O is found in midi* files.  It shows the device
 name and the received/transmitted bytes through the MIDI device.
 
 When the card is equipped with AC97 codecs, there are codec97#*
-subdirectories (desribed later).
+subdirectories (described later).
 
 When the OSS mixer emulation is enabled (and the module is loaded),
 oss_mixer file appears here, too.  This shows the current mapping of
@@ -161,12 +161,12 @@ seq/drivers
 	Lists the currently available ALSA sequencer drivers.
 
 seq/clients
-	Shows the list of currently available sequencer clinets and
+	Shows the list of currently available sequencer clients and
 	ports.  The connection status and the running status are shown
 	in this file, too.
 
 seq/queues
-	Lists the currently allocated/running sequener queues.
+	Lists the currently allocated/running sequencer queues.
 
 seq/timer
 	Lists the currently allocated/running sequencer timers.
@@ -182,10 +182,10 @@ When the problem is related with PCM, first try to turn on xrun_debug
 mode.  This will give you the kernel messages when and where xrun
 happened.
 
-If it's really a bug, report it with the following information
+If it's really a bug, report it with the following information:
 
   - the name of the driver/card, show in /proc/asound/cards
-  - the reigster dump, if available (e.g. card*/cmipci)
+  - the register dump, if available (e.g. card*/cmipci)
 
 when it's a PCM problem,