diff options
Diffstat (limited to 'Documentation/sound/alsa/soc/machine.txt')
| -rw-r--r-- | Documentation/sound/alsa/soc/machine.txt | 38 |
1 files changed, 9 insertions, 29 deletions
diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt index 2524c75557d..3e2ec9cbf39 100644 --- a/Documentation/sound/alsa/soc/machine.txt +++ b/Documentation/sound/alsa/soc/machine.txt @@ -12,6 +12,8 @@ the following struct:- struct snd_soc_card { char *name; + ... + int (*probe)(struct platform_device *pdev); int (*remove)(struct platform_device *pdev); @@ -22,12 +24,13 @@ struct snd_soc_card { int (*resume_pre)(struct platform_device *pdev); int (*resume_post)(struct platform_device *pdev); - /* machine stream operations */ - struct snd_soc_ops *ops; + ... /* CPU <--> Codec DAI links */ struct snd_soc_dai_link *dai_link; int num_links; + + ... }; probe()/remove() @@ -42,11 +45,6 @@ of any machine audio tasks that have to be done before or after the codec, DAIs and DMA is suspended and resumed. Optional. -Machine operations ------------------- -The machine specific audio operations can be set here. Again this is optional. - - Machine DAI Configuration ------------------------- The machine DAI configuration glues all the codec and CPU DAIs together. It can @@ -61,8 +59,10 @@ struct snd_soc_dai_link is used to set up each DAI in your machine. e.g. static struct snd_soc_dai_link corgi_dai = { .name = "WM8731", .stream_name = "WM8731", - .cpu_dai = &pxa_i2s_dai, - .codec_dai = &wm8731_dai, + .cpu_dai_name = "pxa-is2-dai", + .codec_dai_name = "wm8731-hifi", + .platform_name = "pxa-pcm-audio", + .codec_name = "wm8713-codec.0-001a", .init = corgi_wm8731_init, .ops = &corgi_ops, }; @@ -77,26 +77,6 @@ static struct snd_soc_card snd_soc_corgi = { }; -Machine Audio Subsystem ------------------------ - -The machine soc device glues the platform, machine and codec driver together. -Private data can also be set here. e.g. - -/* corgi audio private data */ -static struct wm8731_setup_data corgi_wm8731_setup = { - .i2c_address = 0x1b, -}; - -/* corgi audio subsystem */ -static struct snd_soc_device corgi_snd_devdata = { - .machine = &snd_soc_corgi, - .platform = &pxa2xx_soc_platform, - .codec_dev = &soc_codec_dev_wm8731, - .codec_data = &corgi_wm8731_setup, -}; - - Machine Power Map ----------------- |