diff options
Diffstat (limited to 'Documentation/sound/alsa/ALSA-Configuration.txt')
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 62 |
1 files changed, 52 insertions, 10 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index b117e42a616..e0e54a27fc1 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -746,8 +746,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-hda-intel -------------------- - Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8), - ATI SB450, SB600, RS600, + Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8, ICH9, ICH10, + PCH, SCH), + ATI SB450, SB600, R600, RS600, RS690, RS780, RV610, RV620, + RV630, RV635, RV670, RV770, VIA VT8251/VT8237A, SIS966, ULI M5461 @@ -807,6 +809,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC260 hp HP machines hp-3013 HP machines (3013-variant) + hp-dc7600 HP DC7600 fujitsu Fujitsu S7020 acer Acer TravelMate will Will laptops (PB V7900) @@ -828,8 +831,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. hippo Hippo (ATI) with jack detection, Sony UX-90s hippo_1 Hippo (Benq) with jack detection sony-assamd Sony ASSAMD + toshiba-s06 Toshiba S06 + toshiba-rx1 Toshiba RX1 ultra Samsung Q1 Ultra Vista model lenovo-3000 Lenovo 3000 y410 + nec NEC Versa S9100 basic fixed pin assignment w/o SPDIF auto auto-config reading BIOS (default) @@ -838,6 +844,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack 3-stack model toshiba Toshiba A205 acer Acer laptops + acer-aspire Acer Aspire One dell Dell OEM laptops (Vostro 1200) zepto Zepto laptops test for testing/debugging purpose, almost all controls can @@ -847,6 +854,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC269 basic Basic preset + quanta Quanta FL1 + eeepc-p703 ASUS Eeepc P703 P900A + eeepc-p901 ASUS Eeepc P901 S101 ALC662/663 3stack-dig 3-stack (2-channel) with SPDIF @@ -856,10 +866,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo-101e Lenovo laptop eeepc-p701 ASUS Eeepc P701 eeepc-ep20 ASUS Eeepc EP20 + ecs ECS/Foxconn mobo m51va ASUS M51VA g71v ASUS G71V h13 ASUS H13 g50v ASUS G50V + asus-mode1 ASUS + asus-mode2 ASUS + asus-mode3 ASUS + asus-mode4 ASUS + asus-mode5 ASUS + asus-mode6 ASUS auto auto-config reading BIOS (default) ALC882/885 @@ -891,12 +908,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo-101e Lenovo 101E lenovo-nb0763 Lenovo NB0763 lenovo-ms7195-dig Lenovo MS7195 + lenovo-sky Lenovo Sky haier-w66 Haier W66 3stack-hp HP machines with 3stack (Lucknow, Samba boards) 6stack-dell Dell machines with 6stack (Inspiron 530) mitac Mitac 8252D clevo-m720 Clevo M720 laptop series fujitsu-pi2515 Fujitsu AMILO Pi2515 + 3stack-6ch-intel Intel DG33* boards auto auto-config reading BIOS (default) ALC861/660 @@ -929,7 +948,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. allout 5-jack in back, 2-jack in front, SPDIF out auto auto-config reading BIOS (default) - AD1882 + AD1882 / AD1882A 3stack 3-stack mode (default) 6stack 6-stack mode @@ -1079,7 +1098,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. register value without FIFO size correction as the current DMA pointer. position_fix=2 will make the driver to use the position buffer instead of reading SD_LPIB register. - (Usually SD_LPLIB register is more accurate than the + (Usually SD_LPIB register is more accurate than the position buffer.) NB: If you get many "azx_get_response timeout" messages at @@ -1166,6 +1185,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * Event Electronics, EZ8 * Digigram VX442 * Lionstracs, Mediastaton + * Terrasoniq TS 88 model - Use the given board model, one of the following: delta1010, dio2496, delta66, delta44, audiophile, delta410, @@ -1200,7 +1220,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * TerraTec Phase 22 * TerraTec Phase 28 * AudioTrak Prodigy 7.1 - * AudioTrak Prodigy 7.1LT + * AudioTrak Prodigy 7.1 LT + * AudioTrak Prodigy 7.1 XT + * AudioTrak Prodigy 7.1 HIFI + * AudioTrak Prodigy 7.1 HD2 * AudioTrak Prodigy 192 * Pontis MS300 * Albatron K8X800 Pro II @@ -1211,12 +1234,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * Shuttle SN25P * Onkyo SE-90PCI * Onkyo SE-200PCI + * ESI Juli@ + * Hercules Fortissimo IV + * EGO-SYS WaveTerminal 192M model - Use the given board model, one of the following: revo51, revo71, amp2000, prodigy71, prodigy71lt, - prodigy192, aureon51, aureon71, universe, ap192, - k8x800, phase22, phase28, ms300, av710, se200pci, - se90pci + prodigy71xt, prodigy71hifi, prodigyhd2, prodigy192, + juli, aureon51, aureon71, universe, ap192, k8x800, + phase22, phase28, ms300, av710, se200pci, se90pci, + fortissimo4, sn25p, WT192M This module supports multiple cards and autoprobe. @@ -1255,7 +1282,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module for AC'97 motherboards from Intel and compatibles. * Intel i810/810E, i815, i820, i830, i84x, MX440 - ICH5, ICH6, ICH7, ESB2 + ICH5, ICH6, ICH7, 6300ESB, ESB2 * SiS 7012 (SiS 735) * NVidia NForce, NForce2, NForce3, MCP04, CK804 CK8, CK8S, MCP501 @@ -1951,6 +1978,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. * CHIC True Sound 4Dwave * Shark Predator4D-PCI * Jaton SonicWave 4D + * SiS SI7018 PCI Audio + * Hoontech SoundTrack Digital 4DWave NX pcm_channels - max channels (voices) reserved for PCM wavetable_size - max wavetable size in kB (4-?kb) @@ -1966,12 +1995,25 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. vid - Vendor ID for the device (optional) pid - Product ID for the device (optional) + nrpacks - Max. number of packets per URB (default: 8) + async_unlink - Use async unlink mode (default: yes) device_setup - Device specific magic number (optional) - Influence depends on the device - Default: 0x0000 + ignore_ctl_error - Ignore any USB-controller regarding mixer + interface (default: no) This module supports multiple devices, autoprobe and hotplugging. + NB: nrpacks parameter can be modified dynamically via sysfs. + Don't put the value over 20. Changing via sysfs has no sanity + check. + NB: async_unlink=0 would cause Oops. It remains just for + debugging purpose (if any). + NB: ignore_ctl_error=1 may help when you get an error at accessing + the mixer element such as URB error -22. This happens on some + buggy USB device or the controller. + Module snd-usb-caiaq -------------------- @@ -2078,7 +2120,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ------------------- Module for sound cards based on the Asus AV100/AV200 chips, - i.e., Xonar D1, DX, D2 and D2X. + i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe). This module supports autoprobe and multiple cards. |