diff options
Diffstat (limited to 'Documentation/networking')
| -rw-r--r-- | Documentation/networking/dmfe.txt | 82 |
1 files changed, 44 insertions, 38 deletions
diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt index c0e8398674e..046363552d0 100644 --- a/Documentation/networking/dmfe.txt +++ b/Documentation/networking/dmfe.txt @@ -1,59 +1,65 @@ - dmfe.c: Version 1.28 01/18/2000 +Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. - A Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. - Copyright (C) 1997 Sten Wang +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - as published by the Free Software Foundation; either version 2 - of the License, or (at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. +This driver provides kernel support for Davicom DM9102(A)/DM9132/DM9801 ethernet cards ( CNET +10/100 ethernet cards uses Davicom chipset too, so this driver supports CNET cards too ).If you +didn't compile this driver as a module, it will automatically load itself on boot and print a +line similar to : - A. Compiler command: + dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17) - A-1: For normal single or multiple processor kernel - "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall - -Wstrict-prototypes -O6 -c dmfe.c" +If you compiled this driver as a module, you have to load it on boot.You can load it with command : - A-2: For single or multiple processor with kernel module version function - "gcc -DMODULE -DMODVERSIONS -D__KERNEL__ -I/usr/src/linux/net/inet - -Wall -Wstrict-prototypes -O6 -c dmfe.c" + insmod dmfe +This way it will autodetect the device mode.This is the suggested way to load the module.Or you can pass +a mode= setting to module while loading, like : - B. The following steps teach you how to activate a DM9102 board: + insmod dmfe mode=0 # Force 10M Half Duplex + insmod dmfe mode=1 # Force 100M Half Duplex + insmod dmfe mode=4 # Force 10M Full Duplex + insmod dmfe mode=5 # Force 100M Full Duplex - 1. Used the upper compiler command to compile dmfe.c +Next you should configure your network interface with a command similar to : - 2. Insert dmfe module into kernel - "insmod dmfe" ;;Auto Detection Mode (Suggest) - "insmod dmfe mode=0" ;;Force 10M Half Duplex - "insmod dmfe mode=1" ;;Force 100M Half Duplex - "insmod dmfe mode=4" ;;Force 10M Full Duplex - "insmod dmfe mode=5" ;;Force 100M Full Duplex + ifconfig eth0 172.22.3.18 + ^^^^^^^^^^^ + Your IP Adress - 3. Config a dm9102 network interface - "ifconfig eth0 172.22.3.18" - ^^^^^^^^^^^ Your IP address +Then you may have to modify the default routing table with command : - 4. Activate the IP routing table. For some distributions, it is not - necessary. You can type "route" to check. + route add default eth0 - "route add default eth0" +Now your ethernet card should be up and running. - 5. Well done. Your DM9102 adapter is now activated. +TODO: - C. Object files description: - 1. dmfe_rh61.o: For Redhat 6.1 +Implement pci_driver::suspend() and pci_driver::resume() power management methods. +Check on 64 bit boxes. +Check and fix on big endian boxes. +Test and make sure PCI latency is now correct for all cases. - If you can make sure your kernel version, you can rename - to dmfe.o and directly use it without re-compiling. +Authors: - Author: Sten Wang, 886-3-5798797-8517, E-mail: sten_wang@davicom.com.tw +Sten Wang <sten_wang@davicom.com.tw > : Original Author +Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer + +Contributors: + +Marcelo Tosatti <marcelo@conectiva.com.br> +Alan Cox <alan@redhat.com> +Jeff Garzik <jgarzik@pobox.com> +Vojtech Pavlik <vojtech@suse.cz> |