diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/mrvl-gpio.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/mrvl-gpio.txt | 18 |
1 files changed, 12 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 1e34cfe5ebe..05428f39d9a 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -3,19 +3,25 @@ Required properties: - compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio" - reg : Address and length of the register set for the device -- interrupts : Should be the port interrupt shared by all gpio pins, if -- interrupt-name : Should be the name of irq resource. - one number. +- interrupts : Should be the port interrupt shared by all gpio pins. + There're three gpio interrupts in arch-pxa, and they're gpio0, + gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp, + gpio_mux. +- interrupt-name : Should be the name of irq resource. Each interrupt + binds its interrupt-name. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be one. It is the pin number. Example: gpio: gpio@d4019000 { - compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio"; + compatible = "mrvl,mmp-gpio"; reg = <0xd4019000 0x1000>; - interrupts = <49>, <17>, <18>; - interrupt-name = "gpio_mux", "gpio0", "gpio1"; + interrupts = <49>; + interrupt-name = "gpio_mux"; gpio-controller; #gpio-cells = <1>; interrupt-controller; |