diff options
Diffstat (limited to 'Documentation/arm/empeg')
-rw-r--r-- | Documentation/arm/empeg/README | 13 | ||||
-rw-r--r-- | Documentation/arm/empeg/ir.txt | 49 | ||||
-rw-r--r-- | Documentation/arm/empeg/mkdevs | 11 |
3 files changed, 73 insertions, 0 deletions
diff --git a/Documentation/arm/empeg/README b/Documentation/arm/empeg/README new file mode 100644 index 00000000000..09cc8d03ae5 --- /dev/null +++ b/Documentation/arm/empeg/README @@ -0,0 +1,13 @@ +Empeg, Ltd's Empeg MP3 Car Audio Player + +The initial design is to go in your car, but you can use it at home, on a +boat... almost anywhere. The principle is to store CD-quality music using +MPEG technology onto a hard disk in the unit, and use the power of the +embedded computer to serve up the music you want. + +For more details, see: + + http://www.empeg.com + + + diff --git a/Documentation/arm/empeg/ir.txt b/Documentation/arm/empeg/ir.txt new file mode 100644 index 00000000000..10a29745016 --- /dev/null +++ b/Documentation/arm/empeg/ir.txt @@ -0,0 +1,49 @@ +Infra-red driver documentation. + +Mike Crowe <mac@empeg.com> +(C) Empeg Ltd 1999 + +Not a lot here yet :-) + +The Kenwood KCA-R6A remote control generates a sequence like the following: + +Go low for approx 16T (Around 9000us) +Go high for approx 8T (Around 4000us) +Go low for less than 2T (Around 750us) + +For each of the 32 bits + Go high for more than 2T (Around 1500us) == 1 + Go high for less than T (Around 400us) == 0 + Go low for less than 2T (Around 750us) + +Rather than repeat a signal when the button is held down certain buttons +generate the following code to indicate repetition. + +Go low for approx 16T +Go high for approx 4T +Go low for less than 2T + +(By removing the <2T from the start of the sequence and placing at the end + it can be considered a stop bit but I found it easier to deal with it at + the start). + +The 32 bits are encoded as XxYy where x and y are the actual data values +while X and Y are the logical inverses of the associated data values. Using +LSB first yields sensible codes for the numbers. + +All codes are of the form b9xx + +The numeric keys generate the code 0x where x is the number pressed. + +Tuner 1c +Tape 1d +CD 1e +CD-MD-CH 1f +Track- 0a +Track+ 0b +Rewind 0c +FF 0d +DNPP 5e +Play/Pause 0e +Vol+ 14 +Vol- 15 diff --git a/Documentation/arm/empeg/mkdevs b/Documentation/arm/empeg/mkdevs new file mode 100644 index 00000000000..7a85e28d14f --- /dev/null +++ b/Documentation/arm/empeg/mkdevs @@ -0,0 +1,11 @@ +#!/bin/sh +mknod /dev/display c 244 0 +mknod /dev/ir c 242 0 +mknod /dev/usb0 c 243 0 +mknod /dev/audio c 245 4 +mknod /dev/dsp c 245 3 +mknod /dev/mixer c 245 0 +mknod /dev/empeg_state c 246 0 +mknod /dev/radio0 c 81 64 +ln -sf radio0 radio +ln -sf usb0 usb |