3 files changed, 126 insertions, 0 deletions
diff --git a/Documentation/ABI/stable/sysfs-devices-system-cpu b/Documentation/ABI/stable/sysfs-devices-system-cpu
new file mode 100644
index 00000000000..33c133e2a63
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-system-cpu
@@ -0,0 +1,25 @@
+What: 		/sys/devices/system/cpu/dscr_default
+Date:		13-May-2014
+KernelVersion:	v3.15.0
+Contact:
+Description:	Writes are equivalent to writing to
+		/sys/devices/system/cpu/cpuN/dscr on all CPUs.
+		Reads return the last written value or 0.
+		This value is not a global default: it is a way to set
+		all per-CPU defaults at the same time.
+Values:		64 bit unsigned integer (bit field)
+
+What: 		/sys/devices/system/cpu/cpu[0-9]+/dscr
+Date:		13-May-2014
+KernelVersion:	v3.15.0
+Contact:
+Description:	Default value for the Data Stream Control Register (DSCR) on
+		a CPU.
+		This default value is used when the kernel is executing and
+		for any process that has not set the DSCR itself.
+		If a process ever sets the DSCR (via direct access to the
+		SPR) that value will be persisted for that process and used
+		on any CPU where it executes (overriding the value described
+		here).
+		If set by a process it will be inherited by child processes.
+Values:		64 bit unsigned integer (bit field)
diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-dump b/Documentation/ABI/stable/sysfs-firmware-opal-dump
new file mode 100644
index 00000000000..32fe7f5c488
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-firmware-opal-dump
@@ -0,0 +1,41 @@
+What:		/sys/firmware/opal/dump
+Date:		Feb 2014
+Contact:	Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+		This directory exposes interfaces for interacting with
+		the FSP and platform dumps through OPAL firmware interface.
+
+		This is only for the powerpc/powernv platform.
+
+		initiate_dump:	When '1' is written to it,
+				we will initiate a dump.
+				Read this file for supported commands.
+
+		0xXX-0xYYYY:	A directory for dump of type 0xXX and
+				id 0xYYYY (in hex). The name of this
+				directory should not be relied upon to
+				be in this format, only that it's unique
+				among all dumps. For determining the type
+				and ID of the dump, use the id and type files.
+				Do not rely on any particular size of dump
+				type or dump id.
+
+		Each dump has the following files:
+		id:		An ASCII representation of the dump ID
+				in hex (e.g. '0x01')
+		type:		An ASCII representation of the type of
+				dump in the format "0x%x %s" with the ID
+				in hex and a description of the dump type
+				(or 'unknown').
+				Type '0xffffffff unknown' is used when
+				we could not get the type from firmware.
+				e.g. '0x02 System/Platform Dump'
+		dump:		A binary file containing the dump.
+				The size of the dump is the size of this file.
+		acknowledge:	When 'ack' is written to this, we will
+				acknowledge that we've retrieved the
+				dump to the service processor. It will
+				then remove it, making the dump
+				inaccessible.
+				Reading this file will get a list of
+				supported actions.
diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-elog b/Documentation/ABI/stable/sysfs-firmware-opal-elog
new file mode 100644
index 00000000000..e1f3058f595
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-firmware-opal-elog
@@ -0,0 +1,60 @@
+What:		/sys/firmware/opal/elog
+Date:		Feb 2014
+Contact:	Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+		This directory exposes error log entries retrieved
+		through the OPAL firmware interface.
+
+		Each error log is identified by a unique ID and will
+		exist until explicitly acknowledged to firmware.
+
+		Each log entry has a directory in /sys/firmware/opal/elog.
+
+		Log entries may be purged by the service processor
+		before retrieved by firmware or retrieved/acknowledged by
+		Linux if there is no room for more log entries.
+
+		In the event that Linux has retrieved the log entries
+		but not explicitly acknowledged them to firmware and
+		the service processor needs more room for log entries,
+		the only remaining copy of a log message may be in
+		Linux.
+
+		Typically, a user space daemon will monitor for new
+		entries, read them out and acknowledge them.
+
+		The service processor may be able to store more log
+		entries than firmware can, so after you acknowledge
+		an event from Linux you may instantly get another one
+		from the queue that was generated some time in the past.
+
+		The raw log format is a binary format. We currently
+		do not parse this at all in kernel, leaving it up to
+		user space to solve the problem. In future, we may
+		do more parsing in kernel and add more files to make
+		it easier for simple user space processes to extract
+		more information.
+
+		For each log entry (directory), there are the following
+		files:
+
+		id:		An ASCII representation of the ID of the
+				error log, in hex - e.g. "0x01".
+
+		type:		An ASCII representation of the type id and
+				description of the type of error log.
+				Currently just "0x00 PEL" - platform error log.
+				In the future there may be additional types.
+
+		raw:		A read-only binary file that can be read
+				to get the raw log entry. These are
+				<16kb, often just hundreds of bytes and
+				"average" 2kb.
+
+		acknowledge:	Writing 'ack' to this file will acknowledge
+				the error log to firmware (and in turn
+				the service processor, if applicable).
+				Shortly after acknowledging it, the log
+				entry will be removed from sysfs.
+				Reading this file will list the supported
+				operations (curently just acknowledge).
+\ No newline at end of file