diff options
| -rw-r--r-- | drivers/net/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/benet/be_main.c | 75 | ||||
| -rw-r--r-- | drivers/net/ppp_generic.c | 1 | ||||
| -rw-r--r-- | drivers/net/sky2.c | 201 | ||||
| -rw-r--r-- | drivers/net/sky2.h | 6 | ||||
| -rwxr-xr-x | drivers/net/xilinx_emaclite.c | 1041 | ||||
| -rw-r--r-- | include/linux/mdio.h | 2 | ||||
| -rw-r--r-- | kernel/trace/Kconfig | 1 | ||||
| -rw-r--r-- | net/phonet/socket.c | 2 |
10 files changed, 1190 insertions, 146 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 29935a9fb1a..bbe77a06584 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1926,6 +1926,12 @@ config ATL2 To compile this driver as a module, choose M here. The module will be called atl2. +config XILINX_EMACLITE + tristate "Xilinx 10/100 Ethernet Lite support" + depends on PPC32 || MICROBLAZE + help + This driver supports the 10/100 Ethernet Lite from Xilinx. + source "drivers/net/fs_enet/Kconfig" endif # NET_ETHERNET diff --git a/drivers/net/Makefile b/drivers/net/Makefile index ead8cab3cfe..99ae6d7fe6a 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -142,6 +142,7 @@ obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o ll_temac-objs := ll_temac_main.o ll_temac_mdio.o obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o +obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o obj-$(CONFIG_QLA3XXX) += qla3xxx.o obj-$(CONFIG_QLGE) += qlge/ diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 45507d88e6a..7b9efee890f 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -117,23 +117,18 @@ void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped) iowrite32(val, adapter->db + DB_CQ_OFFSET); } - static int be_mac_addr_set(struct net_device *netdev, void *p) { struct be_adapter *adapter = netdev_priv(netdev); struct sockaddr *addr = p; int status = 0; - if (netif_running(netdev)) { - status = be_cmd_pmac_del(adapter, adapter->if_handle, - adapter->pmac_id); - if (status) - return status; - - status = be_cmd_pmac_add(adapter, (u8 *)addr->sa_data, - adapter->if_handle, &adapter->pmac_id); - } + status = be_cmd_pmac_del(adapter, adapter->if_handle, adapter->pmac_id); + if (status) + return status; + status = be_cmd_pmac_add(adapter, (u8 *)addr->sa_data, + adapter->if_handle, &adapter->pmac_id); if (!status) memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); @@ -1308,6 +1303,12 @@ rx_eq_free: return rc; } +/* There are 8 evt ids per func. Retruns the evt id's bit number */ +static inline int be_evt_bit_get(struct be_adapter *adapter, u32 eq_id) +{ + return eq_id - 8 * be_pci_func(adapter); +} + static irqreturn_t be_intx(int irq, void *dev) { struct be_adapter *adapter = dev; @@ -1481,31 +1482,44 @@ static void be_msix_enable(struct be_adapter *adapter) static inline int be_msix_vec_get(struct be_adapter *adapter, u32 eq_id) { - return adapter->msix_entries[eq_id - 8 * be_pci_func(adapter)].vector; + return adapter->msix_entries[ + be_evt_bit_get(adapter, eq_id)].vector; } -static int be_msix_register(struct be_adapter *adapter) +static int be_request_irq(struct be_adapter *adapter, + struct be_eq_obj *eq_obj, + void *handler, char *desc) { struct net_device *netdev = adapter->netdev; - struct be_eq_obj *tx_eq = &adapter->tx_eq; - struct be_eq_obj *rx_eq = &adapter->rx_eq; - int status, vec; + int vec; + + sprintf(eq_obj->desc, "%s-%s", netdev->name, desc); + vec = be_msix_vec_get(adapter, eq_obj->q.id); + return request_irq(vec, handler, 0, eq_obj->desc, adapter); +} + +static void be_free_irq(struct be_adapter *adapter, struct be_eq_obj *eq_obj) +{ + int vec = be_msix_vec_get(adapter, eq_obj->q.id); + free_irq(vec, adapter); +} - sprintf(tx_eq->desc, "%s-tx", netdev->name); - vec = be_msix_vec_get(adapter, tx_eq->q.id); - status = request_irq(vec, be_msix_tx_mcc, 0, tx_eq->desc, adapter); +static int be_msix_register(struct be_adapter *adapter) +{ + int status; + + status = be_request_irq(adapter, &adapter->tx_eq, be_msix_tx_mcc, "tx"); if (status) goto err; - sprintf(rx_eq->desc, "%s-rx", netdev->name); - vec = be_msix_vec_get(adapter, rx_eq->q.id); - status = request_irq(vec, be_msix_rx, 0, rx_eq->desc, adapter); - if (status) { /* Free TX IRQ */ - vec = be_msix_vec_get(adapter, tx_eq->q.id); - free_irq(vec, adapter); - goto err; - } + status = be_request_irq(adapter, &adapter->rx_eq, be_msix_rx, "rx"); + if (status) + goto free_tx_irq; + return 0; + +free_tx_irq: + be_free_irq(adapter, &adapter->tx_eq); err: dev_warn(&adapter->pdev->dev, "MSIX Request IRQ failed - err %d\n", status); @@ -1542,7 +1556,6 @@ done: static void be_irq_unregister(struct be_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int vec; if (!adapter->isr_registered) return; @@ -1554,10 +1567,8 @@ static void be_irq_unregister(struct be_adapter *adapter) } /* MSIx */ - vec = be_msix_vec_get(adapter, adapter->tx_eq.q.id); - free_irq(vec, adapter); - vec = be_msix_vec_get(adapter, adapter->rx_eq.q.id); - free_irq(vec, adapter); + be_free_irq(adapter, &adapter->tx_eq); + be_free_irq(adapter, &adapter->rx_eq); done: adapter->isr_registered = false; return; @@ -1644,12 +1655,12 @@ do_none: static int be_clear(struct be_adapter *adapter) { + be_mcc_queues_destroy(adapter); be_rx_queues_destroy(adapter); be_tx_queues_destroy(adapter); be_cmd_if_destroy(adapter, adapter->if_handle); - be_mcc_queues_destroy(adapter); return 0; } diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 7dd0868f983..35be2e8f0c9 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1431,6 +1431,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) *otherwise divide it according to the speed *of the channel we are going to transmit on */ + flen = len; if (nfree > 0) { if (pch->speed == 0) { flen = totlen/nfree ; diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 8a763f86661..dd630cf18b4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -50,7 +50,7 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.24" +#define DRV_VERSION "1.25" #define PFX DRV_NAME " " /* @@ -64,10 +64,12 @@ #define RX_MAX_PENDING (RX_LE_SIZE/6 - 2) #define RX_DEF_PENDING RX_MAX_PENDING -#define TX_RING_SIZE 512 -#define TX_DEF_PENDING 128 -#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS) +/* This is the worst case number of transmit list elements for a single skb: + VLAN + TSO + CKSUM + Data + skb_frags * DMA */ +#define MAX_SKB_TX_LE (4 + (sizeof(dma_addr_t)/sizeof(u32))*MAX_SKB_FRAGS) #define TX_MIN_PENDING (MAX_SKB_TX_LE+1) +#define TX_MAX_PENDING 4096 +#define TX_DEF_PENDING 127 #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) @@ -984,12 +986,12 @@ static void sky2_qset(struct sky2_hw *hw, u16 q) * hardware and driver list elements */ static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, - u64 addr, u32 last) + dma_addr_t addr, u32 last) { sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_RST_CLR); - sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), addr >> 32); - sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), (u32) addr); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_HI), upper_32_bits(addr)); + sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_ADDR_LO), lower_32_bits(addr)); sky2_write16(hw, Y2_QADDR(qaddr, PREF_UNIT_LAST_IDX), last); sky2_write32(hw, Y2_QADDR(qaddr, PREF_UNIT_CTRL), PREF_UNIT_OP_ON); @@ -999,8 +1001,11 @@ static void sky2_prefetch_init(struct sky2_hw *hw, u32 qaddr, static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2, u16 *slot) { struct sky2_tx_le *le = sky2->tx_le + *slot; + struct tx_ring_info *re = sky2->tx_ring + *slot; - *slot = RING_NEXT(*slot, TX_RING_SIZE); + *slot = RING_NEXT(*slot, sky2->tx_ring_size); + re->flags = 0; + re->skb = NULL; le->ctrl = 0; return le; } @@ -1016,12 +1021,7 @@ static void tx_init(struct sky2_port *sky2) le = get_tx_le(sky2, &sky2->tx_prod); le->addr = 0; le->opcode = OP_ADDR64 | HW_OWNER; -} - -static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2, - struct sky2_tx_le *le) -{ - return sky2->tx_ring + (le - sky2->tx_le); + sky2->tx_last_upper = 0; } /* Update chip's next pointer */ @@ -1057,7 +1057,7 @@ static void sky2_rx_add(struct sky2_port *sky2, u8 op, } le = sky2_next_rx(sky2); - le->addr = cpu_to_le32((u32) map); + le->addr = cpu_to_le32(lower_32_bits(map)); le->length = cpu_to_le16(len); le->opcode = op | HW_OWNER; } @@ -1177,7 +1177,6 @@ static void sky2_rx_clean(struct sky2_port *sky2) re->skb = NULL; } } - skb_queue_purge(&sky2->rx_recycle); } /* Basic MII support */ @@ -1269,10 +1268,8 @@ static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) struct sk_buff *skb; int i; - skb = __skb_dequeue(&sky2->rx_recycle); - if (!skb) - skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size - + sky2_rx_pad(sky2->hw)); + skb = netdev_alloc_skb(sky2->netdev, + sky2->rx_data_size + sky2_rx_pad(sky2->hw)); if (!skb) goto nomem; @@ -1364,8 +1361,6 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2->rx_data_size = size; - skb_queue_head_init(&sky2->rx_recycle); - /* Fill Rx ring */ for (i = 0; i < sky2->rx_pending; i++) { re = sky2->rx_ring + i; @@ -1432,13 +1427,13 @@ static int sky2_up(struct net_device *dev) /* must be power of 2 */ sky2->tx_le = pci_alloc_consistent(hw->pdev, - TX_RING_SIZE * + sky2->tx_ring_size * sizeof(struct sky2_tx_le), &sky2->tx_le_map); if (!sky2->tx_le) goto err_out; - sky2->tx_ring = kcalloc(TX_RING_SIZE, sizeof(struct tx_ring_info), + sky2->tx_ring = kcalloc(sky2->tx_ring_size, sizeof(struct tx_ring_info), GFP_KERNEL); if (!sky2->tx_ring) goto err_out; @@ -1490,7 +1485,7 @@ static int sky2_up(struct net_device *dev) sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), ECU_TXFF_LEV); sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, - TX_RING_SIZE - 1); + sky2->tx_ring_size - 1); #ifdef SKY2_VLAN_TAG_USED sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL); @@ -1519,7 +1514,7 @@ err_out: } if (sky2->tx_le) { pci_free_consistent(hw->pdev, - TX_RING_SIZE * sizeof(struct sky2_tx_le), + sky2->tx_ring_size * sizeof(struct sky2_tx_le), sky2->tx_le, sky2->tx_le_map); sky2->tx_le = NULL; } @@ -1532,15 +1527,15 @@ err_out: } /* Modular subtraction in ring */ -static inline int tx_dist(unsigned tail, unsigned head) +static inline int tx_inuse(const struct sky2_port *sky2) { - return (head - tail) & (TX_RING_SIZE - 1); + return (sky2->tx_prod - sky2->tx_cons) & (sky2->tx_ring_size - 1); } /* Number of list elements available for next tx */ static inline int tx_avail(const struct sky2_port *sky2) { - return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod); + return sky2->tx_pending - tx_inuse(sky2); } /* Estimate of number of transmit list elements required */ @@ -1560,6 +1555,19 @@ static unsigned tx_le_req(const struct sk_buff *skb) return count; } +static void sky2_tx_unmap(struct pci_dev *pdev, + const struct tx_ring_info *re) +{ + if (re->flags & TX_MAP_SINGLE) + pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_TODEVICE); + else if (re->flags & TX_MAP_PAGE) + pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_TODEVICE); +} + /* * Put one packet in ring for transmit. * A single packet can generate multiple list elements, and @@ -1573,8 +1581,9 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) struct sky2_tx_le *le = NULL; struct tx_ring_info *re; unsigned i, len; - u16 slot; dma_addr_t mapping; + u32 upper; + u16 slot; u16 mss; u8 ctrl; @@ -1593,9 +1602,11 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) dev->name, slot, skb->len); /* Send high bits if needed */ - if (sizeof(dma_addr_t) > sizeof(u32)) { + upper = upper_32_bits(mapping); + if (upper != sky2->tx_last_upper) { le = get_tx_le(sky2, &slot); - le->addr = cpu_to_le32(upper_32_bits(mapping)); + le->addr = cpu_to_le32(upper); + sky2->tx_last_upper = upper; le->opcode = OP_ADDR64 | HW_OWNER; } @@ -1661,16 +1672,17 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) } } + re = sky2->tx_ring + slot; + re->flags = TX_MAP_SINGLE; + pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, len); + le = get_tx_le(sky2, &slot); - le->addr = cpu_to_le32((u32) mapping); + le->addr = cpu_to_le32(lower_32_bits(mapping)); le->length = cpu_to_le16(len); le->ctrl = ctrl; le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); - re = tx_le_re(sky2, le); - re->skb = skb; - pci_unmap_addr_set(re, mapaddr, mapping); - pci_unmap_len_set(re, maplen, len); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; @@ -1681,25 +1693,27 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) if (pci_dma_mapping_error(hw->pdev, mapping)) goto mapping_unwind; - if (sizeof(dma_addr_t) > sizeof(u32)) { + upper = upper_32_bits(mapping); + if (upper != sky2->tx_last_upper) { le = get_tx_le(sky2, &slot); - le->addr = cpu_to_le32(upper_32_bits(mapping)); - le->ctrl = 0; + le->addr = cpu_to_le32(upper); + sky2->tx_last_upper = upper; le->opcode = OP_ADDR64 | HW_OWNER; } + re = sky2->tx_ring + slot; + re->flags = TX_MAP_PAGE; + pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, frag->size); + le = get_tx_le(sky2, &slot); - le->addr = cpu_to_le32((u32) mapping); + le->addr = cpu_to_le32(lower_32_bits(mapping)); le->length = cpu_to_le16(frag->size); le->ctrl = ctrl; le->opcode = OP_BUFFER | HW_OWNER; - - re = tx_le_re(sky2, le); - re->skb = skb; - pci_unmap_addr_set(re, mapaddr, mapping); - pci_unmap_len_set(re, maplen, frag->size); } + re->skb = skb; le->ctrl |= EOP; sky2->tx_prod = slot; @@ -1712,24 +1726,10 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; mapping_unwind: - for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, TX_RING_SIZE)) { - le = sky2->tx_le + i; + for (i = sky2->tx_prod; i != slot; i = RING_NEXT(i, sky2->tx_ring_size)) { re = sky2->tx_ring + i; - switch(le->opcode & ~HW_OWNER) { - case OP_LARGESEND: - case OP_PACKET: - pci_unmap_single(hw->pdev, - pci_unmap_addr(re, mapaddr), - pci_unmap_len(re, maplen), - PCI_DMA_TODEVICE); - break; - case OP_BUFFER: - pci_unmap_page(hw->pdev, pci_unmap_addr(re, mapaddr), - pci_unmap_len(re, maplen), - PCI_DMA_TODEVICE); - break; - } + sky2_tx_unmap(hw->pdev, re); } mapping_error: @@ -1752,34 +1752,18 @@ mapping_error: static void sky2_tx_complete(struct sky2_port *sky2, u16 done) { struct net_device *dev = sky2->netdev; - struct pci_dev *pdev = sky2->hw->pdev; unsigned idx; - BUG_ON(done >= TX_RING_SIZE); + BUG_ON(done >= sky2->tx_ring_size); for (idx = sky2->tx_cons; idx != done; - idx = RING_NEXT(idx, TX_RING_SIZE)) { - struct sky2_tx_le *le = sky2->tx_le + idx; + idx = RING_NEXT(idx, sky2->tx_ring_size)) { struct tx_ring_info *re = sky2->tx_ring + idx; + struct sk_buff *skb = re->skb; - switch(le->opcode & ~HW_OWNER) { - case OP_LARGESEND: - case OP_PACKET: - pci_unmap_single(pdev, - pci_unmap_addr(re, mapaddr), - pci_unmap_len(re, maplen), - PCI_DMA_TODEVICE); - break; - case OP_BUFFER: - pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), - pci_unmap_len(re, maplen), - PCI_DMA_TODEVICE); - break; - } - - if (le->ctrl & EOP) { - struct sk_buff *skb = re->skb; + sky2_tx_unmap(sky2->hw->pdev, re); + if (skb) { if (unlikely(netif_msg_tx_done(sky2))) printk(KERN_DEBUG "%s: tx done %u\n", dev->name, idx); @@ -1787,14 +1771,9 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; - if (skb_queue_len(&sky2->rx_recycle) < sky2->rx_pending - && skb_recycle_check(skb, sky2->rx_data_size - + sky2_rx_pad(sky2->hw))) - __skb_queue_head(&sky2->rx_recycle, skb); - else - dev_kfree_skb_any(skb); + dev_kfree_skb_any(skb); - sky2->tx_next = RING_NEXT(idx, TX_RING_SIZE); + sky2->tx_next = RING_NEXT(idx, sky2->tx_ring_size); } } @@ -1902,7 +1881,7 @@ static int sky2_down(struct net_device *dev) kfree(sky2->rx_ring); pci_free_consistent(hw->pdev, - TX_RING_SIZE * sizeof(struct sky2_tx_le), + sky2->tx_ring_size * sizeof(struct sky2_tx_le), sky2->tx_le, sky2->tx_le_map); kfree(sky2->tx_ring); @@ -2512,7 +2491,6 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) case OP_TXINDEXLE: /* TX index reports status for both ports */ - BUILD_BUG_ON(TX_RING_SIZE > 0x1000); sky2_tx_done(hw->dev[0], status & 0xfff); if (hw->dev[1]) sky2_tx_done(hw->dev[1], @@ -2656,19 +2634,15 @@ static void sky2_mac_intr(struct sky2_hw *hw, unsigned port) } /* This should never happen it is a bug. */ -static void sky2_le_error(struct sky2_hw *hw, unsigned port, - u16 q, unsigned ring_size) +static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q) { struct net_device *dev = hw->dev[port]; - struct sky2_port *sky2 = netdev_priv(dev); - unsigned idx; - const u64 *le = (q == Q_R1 || q == Q_R2) - ? (u64 *) sky2->rx_le : (u64 *) sky2->tx_le; + u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); - idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX)); - printk(KERN_ERR PFX "%s: descriptor error q=%#x get=%u [%llx] put=%u\n", - dev->name, (unsigned) q, idx, (unsigned long long) le[idx], - (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX))); + dev_err(&hw->pdev->dev, PFX + "%s: descriptor error q=%#x get=%u put=%u\n", + dev->name, (unsigned) q, (unsigned) idx, + (unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX))); sky2_write32(hw, Q_ADDR(q, Q_CSR), BMU_CLR_IRQ_CHK); } @@ -2754,16 +2728,16 @@ static void sky2_err_intr(struct sky2_hw *hw, u32 status) sky2_mac_intr(hw, 1); if (status & Y2_IS_CHK_RX1) - sky2_le_error(hw, 0, Q_R1, RX_LE_SIZE); + sky2_le_error(hw, 0, Q_R1); if (status & Y2_IS_CHK_RX2) - sky2_le_error(hw, 1, Q_R2, RX_LE_SIZE); + sky2_le_error(hw, 1, Q_R2); if (status & Y2_IS_CHK_TXA1) - sky2_le_error(hw, 0, Q_XA1, TX_RING_SIZE); + sky2_le_error(hw, 0, Q_XA1); if (status & Y2_IS_CHK_TXA2) - sky2_le_error(hw, 1, Q_XA2, TX_RING_SIZE); + sky2_le_error(hw, 1, Q_XA2); } static int sky2_poll(struct napi_struct *napi, int work_limit) @@ -3668,7 +3642,7 @@ static int sky2_set_coalesce(struct net_device *dev, ecmd->rx_coalesce_usecs_irq > tmax) return -EINVAL; - if (ecmd->tx_max_coalesced_frames >= TX_RING_SIZE-1) + if (ecmd->tx_max_coalesced_frames >= sky2->tx_ring_size-1) return -EINVAL; if (ecmd->rx_max_coalesced_frames > RX_MAX_PENDING) return -EINVAL; @@ -3712,7 +3686,7 @@ static void sky2_get_ringparam(struct net_device *dev, ering->rx_max_pending = RX_MAX_PENDING; ering->rx_mini_max_pending = 0; ering->rx_jumbo_max_pending = 0; - ering->tx_max_pending = TX_RING_SIZE - 1; + ering->tx_max_pending = TX_MAX_PENDING; ering->rx_pending = sky2->rx_pending; ering->rx_mini_pending = 0; @@ -3727,14 +3701,15 @@ static int sky2_set_ringparam(struct net_device *dev, if (ering->rx_pending > RX_MAX_PENDING || ering->rx_pending < 8 || - ering->tx_pending < MAX_SKB_TX_LE || - ering->tx_pending > TX_RING_SIZE - 1) + ering->tx_pending < TX_MIN_PENDING || + ering->tx_pending > TX_MAX_PENDING) return -EINVAL; sky2_detach(dev); sky2->rx_pending = ering->rx_pending; sky2->tx_pending = ering->tx_pending; + sky2->tx_ring_size = roundup_pow_of_two(sky2->tx_pending+1); return sky2_reattach(dev); } @@ -4104,8 +4079,8 @@ static int sky2_debug_show(struct seq_file *seq, void *v) /* Dump contents of tx ring */ sop = 1; - for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < TX_RING_SIZE; - idx = RING_NEXT(idx, TX_RING_SIZE)) { + for (idx = sky2->tx_next; idx != sky2->tx_prod && idx < sky2->tx_ring_size; + idx = RING_NEXT(idx, sky2->tx_ring_size)) { const struct sky2_tx_le *le = sky2->tx_le + idx; u32 a = le32_to_cpu(le->addr); @@ -4314,7 +4289,9 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->wol = wol; spin_lock_init(&sky2->phy_lock); + sky2->tx_pending = TX_DEF_PENDING; + sky2->tx_ring_size = roundup_pow_of_two(TX_DEF_PENDING+1); sky2->rx_pending = RX_DEF_PENDING; hw->dev[port] = dev; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 65b94c366fb..73c95471246 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1984,6 +1984,9 @@ struct sky2_status_le { struct tx_ring_info { struct sk_buff *skb; + unsigned long flags; +#define TX_MAP_SINGLE 0x0001 +#define TX_MAP_PAGE 000002 DECLARE_PCI_UNMAP_ADDR(mapaddr); DECLARE_PCI_UNMAP_LEN(maplen); }; @@ -2011,12 +2014,14 @@ struct sky2_port { struct tx_ring_info *tx_ring; struct sky2_tx_le *tx_le; + u16 tx_ring_size; u16 tx_cons; /* next le to check */ u16 tx_prod; /* next le to use */ u16 tx_next; /* debug only */ u16 tx_pending; u16 tx_last_mss; + u32 tx_last_upper; u32 tx_tcpsum; struct rx_ring_info *rx_ring ____cacheline_aligned_in_smp; @@ -2027,7 +2032,6 @@ struct sky2_port { u16 rx_pending; u16 rx_data_size; u16 rx_nfrags; - struct sk_buff_head rx_recycle; #ifdef SKY2_VLAN_TAG_USED u16 rx_tag; diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c new file mode 100755 index 00000000000..7e05b40ae36 --- /dev/null +++ b/drivers/net/xilinx_emaclite.c @@ -0,0 +1,1041 @@ +/* + * Xilinx EmacLite Linux driver for the Xilinx Ethernet MAC Lite device. + * + * This is a new flat driver which is based on the original emac_lite + * driver from John Williams <john.williams@petalogix.com>. + * + * 2007-2009 (c) Xilinx, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/io.h> + +#include <linux/of_device.h> +#include <linux/of_platform.h> + +#define DRIVER_NAME "xilinx_emaclite" + +/* Register offsets for the EmacLite Core */ +#define XEL_TXBUFF_OFFSET 0x0 /* Transmit Buffer */ +#define XEL_GIER_OFFSET 0x07F8 /* GIE Register */ +#define XEL_TSR_OFFSET 0x07FC /* Tx status */ +#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */ + +#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */ +#define XEL_RPLR_OFFSET 0x100C /* Rx packet length */ +#define XEL_RSR_OFFSET 0x17FC /* Rx status */ + +#define XEL_BUFFER_OFFSET 0x0800 /* Next Tx/Rx buffer's offset */ + +/* Global Interrupt Enable Register (GIER) Bit Masks */ +#define XEL_GIER_GIE_MASK 0x80000000 /* Global Enable */ + +/* Transmit Status Register (TSR) Bit Masks */ +#define XEL_TSR_XMIT_BUSY_MASK 0x00000001 /* Tx complete */ +#define XEL_TSR_PROGRAM_MASK 0x00000002 /* Program the MAC address */ +#define XEL_TSR_XMIT_IE_MASK 0x00000008 /* Tx interrupt enable bit */ +#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000 /* Buffer is active, SW bit + * only. This is not documented + * in the HW spec */ + +/* Define for programming the MAC address into the EmacLite */ +#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK) + +/* Receive Status Register (RSR) */ +#define XEL_RSR_RECV_DONE_MASK 0x00000001 /* Rx complete */ +#define XEL_RSR_RECV_IE_MASK 0x00000008 /* Rx interrupt enable bit */ + +/* Transmit Packet Length Register (TPLR) */ +#define XEL_TPLR_LENGTH_MASK 0x0000FFFF /* Tx packet length */ + +/* Receive Packet Length Register (RPLR) */ +#define XEL_RPLR_LENGTH_MASK 0x0000FFFF /* Rx packet length */ + +#define XEL_HEADER_OFFSET 12 /* Offset to length field */ +#define XEL_HEADER_SHIFT 16 /* Shift value for length */ + +/* General Ethernet Definitions */ +#define XEL_ARP_PACKET_SIZE 28 /* Max ARP packet size */ +#define XEL_HEADER_IP_LENGTH_OFFSET 16 /* IP Length Offset */ + + + +#define TX_TIMEOUT (60*HZ) /* Tx timeout is 60 seconds. */ +#define ALIGNMENT 4 + +/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */ +#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT) + +/** + * struct net_local - Our private per device data + * @ndev: instance of the network device + * @tx_ping_pong: indicates whether Tx Pong buffer is configured in HW + * @rx_ping_pong: indicates whether Rx Pong buffer is configured in HW + * @next_tx_buf_to_use: next Tx buffer to write to + * @next_rx_buf_to_use: next Rx buffer to read from + * @base_addr: base address of the Emaclite device + * @reset_lock: lock used for synchronization + * @deferred_skb: holds an skb (for transmission at a later time) when the + * Tx buffer is not free + */ +struct net_local { + + struct net_device *ndev; + + bool tx_ping_pong; + bool rx_ping_pong; + u32 next_tx_buf_to_use; + u32 next_rx_buf_to_use; + void __iomem *base_addr; + + spinlock_t reset_lock; + struct sk_buff *deferred_skb; +}; + + +/*************************/ +/* EmacLite driver calls */ +/*************************/ + +/** + * xemaclite_enable_interrupts - Enable the interrupts for the EmacLite device + * @drvdata: Pointer to the Emaclite device private data + * + * This function enables the Tx and Rx interrupts for the Emaclite device along + * with the Global Interrupt Enable. + */ +static void xemaclite_enable_interrupts(struct net_local *drvdata) +{ + u32 reg_data; + + /* Enable the Tx interrupts for the first Buffer */ + reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET); + out_be32(drvdata->base_addr + XEL_TSR_OFFSET, + reg_data | XEL_TSR_XMIT_IE_MASK); + + /* Enable the Tx interrupts for the second Buffer if + * configured in HW */ + if (drvdata->tx_ping_pong != 0) { + reg_data = in_be32(drvdata->base_addr + + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); + out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET, + reg_data | XEL_TSR_XMIT_IE_MASK); + } + + /* Enable the Rx interrupts for the first buffer */ + reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET); + out_be32(drvdata->base_addr + XEL_RSR_OFFSET, + reg_data | XEL_RSR_RECV_IE_MASK); + + /* Enable the Rx interrupts for the second Buffer if + * configured in HW */ + if (drvdata->rx_ping_pong != 0) { + reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_RSR_OFFSET); + out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_RSR_OFFSET, + reg_data | XEL_RSR_RECV_IE_MASK); + } + + /* Enable the Global Interrupt Enable */ + out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK); +} + +/** + * xemaclite_disable_interrupts - Disable the interrupts for the EmacLite device + * @drvdata: Pointer to the Emaclite device private data + * + * This function disables the Tx and Rx interrupts for the Emaclite device, + * along with the Global Interrupt Enable. + */ +static void xemaclite_disable_interrupts(struct net_local *drvdata) +{ + u32 reg_data; + + /* Disable the Global Interrupt Enable */ + out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK); + + /* Disable the Tx interrupts for the first buffer */ + reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET); + out_be32(drvdata->base_addr + XEL_TSR_OFFSET, + reg_data & (~XEL_TSR_XMIT_IE_MASK)); + + /* Disable the Tx interrupts for the second Buffer + * if configured in HW */ + if (drvdata->tx_ping_pong != 0) { + reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET); + out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_TSR_OFFSET, + reg_data & (~XEL_TSR_XMIT_IE_MASK)); + } + + /* Disable the Rx interrupts for the first buffer */ + reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET); + out_be32(drvdata->base_addr + XEL_RSR_OFFSET, + reg_data & (~XEL_RSR_RECV_IE_MASK)); + + /* Disable the Rx interrupts for the second buffer + * if configured in HW */ + if (drvdata->rx_ping_pong != 0) { + + reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_RSR_OFFSET); + out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET + + XEL_RSR_OFFSET, + reg_data & (~XEL_RSR_RECV_IE_MASK)); + } +} + +/** + * xemaclite_aligned_write - Write from 16-bit aligned to 32-bit aligned address + * @src_ptr: Void pointer to the 16-bit aligned source address + * @dest_ptr: Pointer to the 32-bit aligned destination address + * @length: Number bytes to write from source to destination + * + * This function writes data from a 16-bit aligned buffer to a 32-bit aligned + * address in the EmacLite device. + */ +static void xemaclite_aligned_write(void *src_ptr, u32 *dest_ptr, + unsigned length) +{ + u32 align_buffer; + u32 *to_u32_ptr; + u16 *from_u16_ptr, *to_u16_ptr; + + to_u32_ptr = dest_ptr; + from_u16_ptr = (u16 *) src_ptr; + align_buffer = 0; + + for (; length > 3; length -= 4) { + to_u16_ptr = (u16 *) ((void *) &align_buffer); + *to_u16_ptr++ = *from_u16_ptr++; + *to_u16_ptr++ = *from_u16_ptr++; + + /* Output a word */ + *to_u32_ptr++ = align_buffer; + } + if (length) { + u8 *from_u8_ptr, *to_u8_ptr; + + /* Set up to output the remaining data */ + align_buffer = 0; + to_u8_ptr = (u8 *) &align_buffer; + from_u8_ptr = (u8 *) from_u16_ptr; + + /* Output the remaining data */ + for (; length > 0; length--) + *to_u8_ptr++ = *from_u8_ptr++; + + *to_u32_ptr = align_buffer; + } +} + +/** + * xemaclite_aligned_read - Read from 32-bit aligned to 16-bit aligned buffer + * @src_ptr: Pointer to the 32-bit aligned source address + * @dest_ptr: Pointer to the 16-bit aligned destination address + * @length: Number bytes to read from source to destination + * + * This function reads data from a 32-bit aligned address in the EmacLite device + * to a 16-bit aligned buffer. + */ +static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr, + unsigned length) +{ + u16 *to_u16_ptr, *from_u16_ptr; + u32 *from_u32_ptr; + u32 align_buffer; + + from_u32_ptr = src_ptr; + to_u16_ptr = (u16 *) dest_ptr; + + for (; length > 3; length -= 4) { + /* Copy each word into the temporary buffer */ + align_buffer = *from_u32_ptr++; + from_u16_ptr = (u16 *)&align_buffer; + + /* Read data from source */ + *to_u16_ptr++ = *from_u16_ptr++; + *to_u16_ptr++ = *from_u16_ptr++; + } + + if (length) { + u8 *to_u8_ptr, *from_u8_ptr; + + /* Set up to read the remaining data */ + to_u8_ptr = (u8 *) to_u16_ptr; + align_buffer = *from_u32_ptr++; + from_u8_ptr = (u8 *) &align_buffer; + + /* Read the remaining data */ + for (; length > 0; length--) + *to_u8_ptr = *from_u8_ptr; + } +} + +/** + * xemaclite_send_data - Send an Ethernet frame + * @drvdata: Pointer to the Emaclite device private data + * @data: Pointer to the data to be sent + * @byte_count: Total frame size, including header + * + * This function checks if the Tx buffer of the Emaclite device is free to send + * data. If so, it fills the Tx buffer with data for transmission. Otherwise, it + * returns an error. + * + * Return: 0 upon success or -1 if the buffer(s) are full. + * + * Note: The maximum Tx packet size can not be more than Ethernet header + * (14 Bytes) + Maximum MTU (1500 bytes). This is excluding FCS. + */ +static int xemaclite_send_data(struct net_local *drvdata, u8 *data, + unsigned int byte_count) +{ + u32 reg_data; + void __iomem *addr; + + /* Determine the expected Tx buffer address */ + addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; + + /* If the length is too large, truncate it */ + if (byte_count > ETH_FRAME_LEN) + byte_count = ETH_FRAME_LEN; + + /* Check if the expected buffer is available */ + reg_data = in_be32(addr + XEL_TSR_OFFSET); + if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | + XEL_TSR_XMIT_ACTIVE_MASK)) == 0) { + + /* Switch to next buffer if configured */ + if (drvdata->tx_ping_pong != 0) + drvdata->next_tx_buf_to_use ^= XEL_BUFFER_OFFSET; + } else if (drvdata->tx_ping_pong != 0) { + /* If the expected buffer is full, try the other buffer, + * if it is configured in HW */ + + addr = (void __iomem __force *)((u32 __force)addr ^ + XEL_BUFFER_OFFSET); + reg_data = in_be32(addr + XEL_TSR_OFFSET); + + if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK | + XEL_TSR_XMIT_ACTIVE_MASK)) != 0) + return -1; /* Buffers were full, return failure */ + } else + return -1; /* Buffer was full, return failure */ + + /* Write the frame to the buffer */ + xemaclite_aligned_write(data, (u32 __force *) addr, byte_count); + + out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK)); + + /* Update the Tx Status Register to indicate that there is a + * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which + * is used by the interrupt handler to check whether a frame + * has been transmitted */ + reg_data = in_be32(addr + XEL_TSR_OFFSET); + reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK); + out_be32(addr + XEL_TSR_OFFSET, reg_data); + + return 0; +} + +/** + * xemaclite_recv_data - Receive a frame + * @drvdata: Pointer to the Emaclite device private data + * @data: Address where the data is to be received + * + * This function is intended to be called from the interrupt context or + * with a wrapper which waits for the receive frame to be available. + * + * Return: Total number of bytes received + */ +static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data) +{ + void __iomem *addr; + u16 length, proto_type; + u32 reg_data; + + /* Determine the expected buffer address */ + addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use); + + /* Verify which buffer has valid data */ + reg_data = in_be32(addr + XEL_RSR_OFFSET); + + if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) { + if (drvdata->rx_ping_pong != 0) + drvdata->next_rx_buf_to_use ^= XEL_BUFFER_OFFSET; + } else { + /* The instance is out of sync, try other buffer if other + * buffer is configured, return 0 otherwise. If the instance is + * out of sync, do not update the 'next_rx_buf_to_use' since it + * will correct on subsequent calls */ + if (drvdata->rx_ping_pong != 0) + addr = (void __iomem __force *)((u32 __force)addr ^ + XEL_BUFFER_OFFSET); + else + return 0; /* No data was available */ + + /* Verify that buffer has valid data */ + reg_data = in_be32(addr + XEL_RSR_OFFSET); + if ((reg_data & XEL_RSR_RECV_DONE_MASK) != + XEL_RSR_RECV_DONE_MASK) + return 0; /* No data was available */ + } + + /* Get the protocol type of the ethernet frame that arrived */ + proto_type = ((in_be32(addr + XEL_HEADER_OFFSET + + XEL_RXBUFF_OFFSET) >> XEL_HEADER_SHIFT) & + XEL_RPLR_LENGTH_MASK); + + /* Check if received ethernet frame is a raw ethernet frame + * or an IP packet or an ARP packet */ + if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) { + + if (proto_type == ETH_P_IP) { + length = ((in_be32(addr + + XEL_HEADER_IP_LENGTH_OFFSET + + XEL_RXBUFF_OFFSET) >> + XEL_HEADER_SHIFT) & + XEL_RPLR_LENGTH_MASK); + length += ETH_HLEN + ETH_FCS_LEN; + + } else if (proto_type == ETH_P_ARP) + length = XEL_ARP_PACKET_SIZE + ETH_HLEN + ETH_FCS_LEN; + else + /* Field contains type other than IP or ARP, use max + * frame size and let user parse it */ + length = ETH_FRAME_LEN + ETH_FCS_LEN; + } else + /* Use the length in the frame, plus the header and trailer */ + length = proto_type + ETH_HLEN + ETH_FCS_LEN; + + /* Read from the EmacLite device */ + xemaclite_aligned_read((u32 __force *) (addr + XEL_RXBUFF_OFFSET), + data, length); + + /* Acknowledge the frame */ + reg_data = in_be32(addr + XEL_RSR_OFFSET); + reg_data &= ~XEL_RSR_RECV_DONE_MASK; + out_be32(addr + XEL_RSR_OFFSET, reg_data); + + return length; +} + +/** + * xemaclite_set_mac_address - Set the MAC address for this device + * @drvdata: Pointer to the Emaclite device private data + * @address_ptr:Pointer to the MAC address (MAC address is a 48-bit value) + * + * Tx must be idle and Rx should be idle for deterministic results. + * It is recommended that this function should be called after the + * initialization and before transmission of any packets from the device. + * The MAC address can be programmed using any of the two transmit + * buffers (if configured). + */ +static void xemaclite_set_mac_address(struct net_local *drvdata, + u8 *address_ptr) +{ + void __iomem *addr; + u32 reg_data; + + /* Determine the expected Tx buffer address */ + addr = drvdata->base_addr + drvdata->next_tx_buf_to_use; + + xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN); + + out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN); + + /* Update the MAC address in the EmacLite */ + reg_data = in_be32(addr + XEL_TSR_OFFSET); + out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR); + + /* Wait for EmacLite to finish with the MAC address update */ + while ((in_be32(addr + XEL_TSR_OFFSET) & + XEL_TSR_PROG_MAC_ADDR) != 0) + ; +} + +/** + * xemaclite_tx_timeout - Callback for Tx Timeout + * @dev: Pointer to the network device + * + * This function is called when Tx time out occurs for Emaclite device. + */ +static void xemaclite_tx_timeout(struct net_device *dev) +{ + struct net_local *lp = (struct net_local *) netdev_priv(dev); + unsigned long flags; + + dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n", + TX_TIMEOUT * 1000UL / HZ); + + dev->stats.tx_errors++; + + /* Reset the device */ + spin_lock_irqsave(&lp->reset_lock, flags); + + /* Shouldn't really be necessary, but shouldn't hurt */ + netif_stop_queue(dev); + + xemaclite_disable_interrupts(lp); + xemaclite_enable_interrupts(lp); + + if (lp->deferred_skb) { + dev_kfree_skb(lp->deferred_skb); + lp->deferred_skb = NULL; + dev->stats.tx_errors++; + } + + /* To exclude tx timeout */ + dev->trans_start = 0xffffffff - TX_TIMEOUT - TX_TIMEOUT; + + /* We're all ready to go. Start the queue */ + netif_wake_queue(dev); + spin_unlock_irqrestore(&lp->reset_lock, flags); +} + +/**********************/ +/* Interrupt Handlers */ +/**********************/ + +/** + * xemaclite_tx_handler - Interrupt handler for frames sent + * @dev: Pointer to the network device + * + * This function updates the number of packets transmitted and handles the + * deferred skb, if there is one. + */ +static void xemaclite_tx_handler(struct net_device *dev) +{ + struct net_local *lp = (struct net_local *) netdev_priv(dev); + + dev->stats.tx_packets++; + if (lp->deferred_skb) { + if (xemaclite_send_data(lp, + (u8 *) lp->deferred_skb->data, + lp->deferred_skb->len) != 0) + return; + else { + dev->stats.tx_bytes += lp->deferred_skb->len; + dev_kfree_skb_irq(lp->deferred_skb); + lp->deferred_skb = NULL; + dev->trans_start = jiffies; + netif_wake_queue(dev); + } + } +} + +/** + * xemaclite_rx_handler- Interrupt handler for frames received + * @dev: Pointer to the network device + * + * This function allocates memory for a socket buffer, fills it with data + * received and hands it over to the TCP/IP stack. + */ +static void xemaclite_rx_handler(struct net_device *dev) +{ + struct net_local *lp = (struct net_local *) netdev_priv(dev); + struct sk_buff *skb; + unsigned int align; + u32 len; + + len = ETH_FRAME_LEN + ETH_FCS_LEN; + skb = dev_alloc_skb(len + ALIGNMENT); + if (!skb) { + /* Couldn't get memory. */ + dev->stats.rx_dropped++; + dev_err(&lp->ndev->dev, "Could not allocate receive buffer\n"); + return; + } + + /* + * A new skb should have the data halfword aligned, but this code is + * here just in case that isn't true. Calculate how many + * bytes we should reserve to get the data to start on a word + * boundary */ + align = BUFFER_ALIGN(skb->data); + if (align) + skb_reserve(skb, align); + + skb_reserve(skb, 2); + + len = xemaclite_recv_data(lp, (u8 *) skb->data); + + if (!len) { + dev->stats.rx_errors++; + dev_kfree_skb_irq(skb); + return; + } + + skb_put(skb, len); /* Tell the skb how much data we got */ + skb->dev = dev; /* Fill out required meta-data */ + + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_NONE; + + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; + dev->last_rx = jiffies; + + netif_rx(skb); /* Send the packet upstream */ +} + +/** + * xemaclite_interrupt - Interrupt handler for this driver + * @irq: Irq of the Emaclite device + * @dev_id: Void pointer to the network device instance used as callback + * reference + * + * This function handles the Tx and Rx interrupts of the EmacLite device. + */ +static irqreturn_t xemaclite_interrupt(int irq, void *dev_id) +{ + bool tx_complete = 0; + struct net_device *dev = dev_id; + struct net_local *lp = (struct net_local *) netdev_priv(dev); + void __iomem *base_addr = lp->base_addr; + u32 tx_status; + + /* Check if there is Rx Data available */ + if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) || + (in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET) + & XEL_RSR_RECV_DONE_MASK)) + + xemaclite_rx_handler(dev); + + /* Check if the Transmission for the first buffer is completed */ + tx_status = in_be32(base_addr + XEL_TSR_OFFSET); + if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && + (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { + + tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; + out_be32(base_addr + XEL_TSR_OFFSET, tx_status); + + tx_complete = 1; + } + + /* Check if the Transmission for the second buffer is completed */ + tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET); + if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) && + (tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) { + + tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK; + out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, + tx_status); + + tx_complete = 1; + } + + /* If there was a Tx interrupt, call the Tx Handler */ + if (tx_complete != 0) + xemaclite_tx_handler(dev); + + return IRQ_HANDLED; +} + +/** + * xemaclite_open - Open the network device + * @dev: Pointer to the network device + * + * This function sets the MAC address, requests an IRQ and enables interrupts + * for the Emaclite device and starts the Tx queue. + */ +static int xemaclite_open(struct net_device *dev) +{ + struct net_local *lp = (struct net_local *) netdev_priv(dev); + int retval; + + /* Just to be safe, stop the device first */ + xemaclite_disable_interrupts(lp); + + /* Set the MAC address each time opened */ + xemaclite_set_mac_address(lp, dev->dev_addr); + + /* Grab the IRQ */ + retval = request_irq(dev->irq, &xemaclite_interrupt, 0, dev->name, dev); + if (retval) { + dev_err(&lp->ndev->dev, "Could not allocate interrupt %d\n", + dev->irq); + return retval; + } + + /* Enable Interrupts */ + xemaclite_enable_interrupts(lp); + + /* We're ready to go */ + netif_start_queue(dev); + + return 0; +} + +/** + * xemaclite_close - Close the network device + * @dev: Pointer to the network device + * + * This function stops the Tx queue, disables interrupts and frees the IRQ for + * the Emaclite device. + */ +static int xemaclite_close(struct net_device *dev) +{ + struct net_local *lp = (struct net_local *) netdev_priv(dev); + + netif_stop_queue(dev); + xemaclite_disable_interrupts(lp); + free_irq(dev->irq, dev); + + return 0; +} + +/** + * xemaclite_get_stats - Get the stats for the net_device + * @dev: Pointer to the network device + * + * This function returns the address of the 'net_device_stats' structure for the + * given network device. This structure holds usage statistics for the network + * device. + * + * Return: Pointer to the net_device_stats structure. + */ +static struct net_device_stats *xemaclite_get_stats(struct net_device *dev) +{ + return &dev->stats; +} + +/** + * xemaclite_send - Transmit a frame + * @orig_skb: Pointer to the socket buffer to be transmitted + * @dev: Pointer to the network device + * + * This function checks if the Tx buffer of the Emaclite device is free to send + * data. If so, it fills the Tx buffer with data from socket buffer data, + * updates the stats and frees the socket buffer. The Tx completion is signaled + * by an interrupt. If the Tx buffer isn't free, then the socket buffer is + * deferred and the Tx queue is stopped so that the deferred socket buffer can + * be transmitted when the Emaclite device is free to transmit data. + * + * Return: 0, always. + */ +static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev) +{ + struct net_local *lp = (struct net_local *) netdev_priv(dev); + struct sk_buff *new_skb; + unsigned int len; + unsigned long flags; + + len = orig_skb->len; + + new_skb = orig_skb; + + spin_lock_irqsave(&lp->reset_lock, flags); + if (xemaclite_send_data(lp, (u8 *) new_skb->data, len) != 0) { + /* If the Emaclite Tx buffer is busy, stop the Tx queue and + * defer the skb for transmission at a later point when the + * current transmission is complete */ + netif_stop_queue(dev); + lp->deferred_skb = new_skb; + spin_unlock_irqrestore(&lp->reset_lock, flags); + return 0; + } + spin_unlock_irqrestore(&lp->reset_lock, flags); + + dev->stats.tx_bytes += len; + dev_kfree_skb(new_skb); + dev->trans_start = jiffies; + + return 0; +} + +/** + * xemaclite_ioctl - Perform IO Control operations on the network device + * @dev: Pointer to the network device + * @rq: Pointer to the interface request structure + * @cmd: IOCTL command + * + * The only IOCTL operation supported by this function is setting the MAC + * address. An error is reported if any other operations are requested. + * + * Return: 0 to indicate success, or a negative error for failure. + */ +static int xemaclite_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct net_local *lp = (struct net_local *) netdev_priv(dev); + struct hw_addr_data *hw_addr = (struct hw_addr_data *) &rq->ifr_hwaddr; + + switch (cmd) { + case SIOCETHTOOL: + return -EIO; + + case SIOCSIFHWADDR: + dev_err(&lp->ndev->dev, "SIOCSIFHWADDR\n"); + + /* Copy MAC address in from user space */ + copy_from_user((void __force *) dev->dev_addr, + (void __user __force *) hw_addr, + IFHWADDRLEN); + xemaclite_set_mac_address(lp, dev->dev_addr); + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +/** + * xemaclite_remove_ndev - Free the network device + * @ndev: Pointer to the network device to be freed + * + * This function un maps the IO region of the Emaclite device and frees the net + * device. + */ +static void xemaclite_remove_ndev(struct net_device *ndev) +{ + if (ndev) { + struct net_local *lp = (struct net_local *) netdev_priv(ndev); + + if (lp->base_addr) + iounmap((void __iomem __force *) (lp->base_addr)); + free_netdev(ndev); + } +} + +/** + * get_bool - Get a parameter from the OF device + * @ofdev: Pointer to OF device structure + * @s: Property to be retrieved + * + * This function looks for a property in the device node and returns the value + * of the property if its found or 0 if the property is not found. + * + * Return: Value of the parameter if the parameter is found, or 0 otherwise + */ +static bool get_bool(struct of_device *ofdev, const char *s) +{ + u32 *p = (u32 *)of_get_property(ofdev->node, s, NULL); + + if (p) { + return (bool)*p; + } else { + dev_warn(&ofdev->dev, "Parameter %s not found," + "defaulting to false\n", s); + return 0; + } +} + +static struct net_device_ops xemaclite_netdev_ops; + +/** + * xemaclite_of_probe - Probe method for the Emaclite device. + * @ofdev: Pointer to OF device structure + * @match: Pointer to the structure used for matching a device + * + * This function probes for the Emaclite device in the device tree. + * It initializes the driver data structure and the hardware, sets the MAC + * address and registers the network device. + * + * Return: 0, if the driver is bound to the Emaclite device, or + * a negative error if there is failure. + */ +static int __devinit xemaclite_of_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct resource r_irq; /* Interrupt resources */ + struct resource r_mem; /* IO mem resources */ + struct net_device *ndev = NULL; + struct net_local *lp = NULL; + struct device *dev = &ofdev->dev; + const void *mac_address; + + int rc = 0; + + dev_info(dev, "Device Tree Probing\n"); + + /* Get iospace for the device */ + rc = of_address_to_resource(ofdev->node, 0, &r_mem); + if (rc) { + dev_err(dev, "invalid address\n"); + return rc; + } + + /* Get IRQ for the device */ + rc = of_irq_to_resource(ofdev->node, 0, &r_irq); + if (rc == NO_IRQ) { + dev_err(dev, "no IRQ found\n"); + return rc; + } + + /* Create an ethernet device instance */ + ndev = alloc_etherdev(sizeof(struct net_local)); + if (!ndev) { + dev_err(dev, "Could not allocate network device\n"); + return -ENOMEM; + } + + dev_set_drvdata(dev, ndev); + + ndev->irq = r_irq.start; + ndev->mem_start = r_mem.start; + ndev->mem_end = r_mem.end; + + lp = netdev_priv(ndev); + lp->ndev = ndev; + + if (!request_mem_region(ndev->mem_start, + ndev->mem_end - ndev->mem_start + 1, + DRIVER_NAME)) { + dev_err(dev, "Couldn't lock memory region at %p\n", + (void *)ndev->mem_start); + rc = -EBUSY; + goto error2; + } + + /* Get the virtual base address for the device */ + lp->base_addr = ioremap(r_mem.start, r_mem.end - r_mem.start + 1); + if (NULL == lp->base_addr) { + dev_err(dev, "EmacLite: Could not allocate iomem\n"); + rc = -EIO; + goto error1; + } + + spin_lock_init(&lp->reset_lock); + lp->next_tx_buf_to_use = 0x0; + lp->next_rx_buf_to_use = 0x0; + lp->tx_ping_pong = get_bool(ofdev, "xlnx,tx-ping-pong"); + lp->rx_ping_pong = get_bool(ofdev, "xlnx,rx-ping-pong"); + mac_address = of_get_mac_address(ofdev->node); + + if (mac_address) + /* Set the MAC address. */ + memcpy(ndev->dev_addr, mac_address, 6); + else + dev_warn(dev, "No MAC address found\n"); + + /* Clear the Tx CSR's in case this is a restart */ + out_be32(lp->base_addr + XEL_TSR_OFFSET, 0); + out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0); + + /* Set the MAC address in the EmacLite device */ + xemaclite_set_mac_address(lp, ndev->dev_addr); + + dev_info(dev, + "MAC address is now %2x:%2x:%2x:%2x:%2x:%2x\n", + ndev->dev_addr[0], ndev->dev_addr[1], + ndev->dev_addr[2], ndev->dev_addr[3], + ndev->dev_addr[4], ndev->dev_addr[5]); + + ndev->netdev_ops = &xemaclite_netdev_ops; + ndev->flags &= ~IFF_MULTICAST; + ndev->watchdog_timeo = TX_TIMEOUT; + + /* Finally, register the device */ + rc = register_netdev(ndev); + if (rc) { + dev_err(dev, + "Cannot register network device, aborting\n"); + goto error1; + } + + dev_info(dev, + "Xilinx EmacLite at 0x%08X mapped to 0x%08X, irq=%d\n", + (unsigned int __force)ndev->mem_start, + (unsigned int __force)lp->base_addr, ndev->irq); + return 0; + +error1: + release_mem_region(ndev->mem_start, r_mem.end - r_mem.start + 1); + +error2: + xemaclite_remove_ndev(ndev); + return rc; +} + +/** + * xemaclite_of_remove - Unbind the driver from the Emaclite device. + * @of_dev: Pointer to OF device structure + * + * This function is called if a device is physically removed from the system or + * if the driver module is being unloaded. It frees any resources allocated to + * the device. + * + * Return: 0, always. + */ +static int __devexit xemaclite_of_remove(struct of_device *of_dev) +{ + struct device *dev = &of_dev->dev; + struct net_device *ndev = dev_get_drvdata(dev); + + unregister_netdev(ndev); + + release_mem_region(ndev->mem_start, ndev->mem_end-ndev->mem_start + 1); + + xemaclite_remove_ndev(ndev); + + dev_set_drvdata(dev, NULL); + + return 0; +} + +static struct net_device_ops xemaclite_netdev_ops = { + .ndo_open = xemaclite_open, + .ndo_stop = xemaclite_close, + .ndo_start_xmit = xemaclite_send, + .ndo_do_ioctl = xemaclite_ioctl, + .ndo_tx_timeout = xemaclite_tx_timeout, + .ndo_get_stats = xemaclite_get_stats, +}; + +/* Match table for OF platform binding */ +static struct of_device_id xemaclite_of_match[] __devinitdata = { + { .compatible = "xlnx,opb-ethernetlite-1.01.a", }, + { .compatible = "xlnx,opb-ethernetlite-1.01.b", }, + { .compatible = "xlnx,xps-ethernetlite-1.00.a", }, + { .compatible = "xlnx,xps-ethernetlite-2.00.a", }, + { .compatible = "xlnx,xps-ethernetlite-2.01.a", }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(of, xemaclite_of_match); + +static struct of_platform_driver xemaclite_of_driver = { + .name = DRIVER_NAME, + .match_table = xemaclite_of_match, + .probe = xemaclite_of_probe, + .remove = __devexit_p(xemaclite_of_remove), +}; + +/** + * xgpiopss_init - Initial driver registration call + * + * Return: 0 upon success, or a negative error upon failure. + */ +static int __init xemaclite_init(void) +{ + /* No kernel boot options used, we just need to register the driver */ + return of_register_platform_driver(&xemaclite_of_driver); +} + +/** + * xemaclite_cleanup - Driver un-registration call + */ +static void __exit xemaclite_cleanup(void) +{ + of_unregister_platform_driver(&xemaclite_of_driver); +} + +module_init(xemaclite_init); +module_exit(xemaclite_cleanup); + +MODULE_AUTHOR("Xilinx, Inc."); +MODULE_DESCRIPTION("Xilinx Ethernet MAC Lite driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mdio.h b/include/linux/mdio.h index cfdf1df2875..c779b49a1fd 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -304,7 +304,7 @@ static inline __u16 mdio_phy_id_devad(int phy_id) */ struct mdio_if_info { int prtad; - u32 __bitwise mmds; + u32 mmds; unsigned mode_support; struct net_device *dev; diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index f09d7635c0e..9a2f19bf051 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -236,6 +236,7 @@ config BOOT_TRACER config SKB_SOURCES_TRACER bool "Trace skb source information" + depends on NET select GENERIC_TRACER help This tracer helps developers/sysadmins correlate skb allocation and diff --git a/net/phonet/socket.c b/net/phonet/socket.c index 5f26c3711a1..7a4ee397d2f 100644 --- a/net/phonet/socket.c +++ b/net/phonet/socket.c @@ -413,6 +413,7 @@ found: } EXPORT_SYMBOL(pn_sock_get_port); +#ifdef CONFIG_PROC_FS static struct sock *pn_sock_get_idx(struct seq_file *seq, loff_t pos) { struct net *net = seq_file_net(seq); @@ -509,3 +510,4 @@ const struct file_operations pn_sock_seq_fops = { .llseek = seq_lseek, .release = seq_release_net, }; +#endif |