diff options
83 files changed, 2582 insertions, 1519 deletions
diff --git a/Documentation/devicetree/bindings/regulator/as3722-regulator.txt b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt new file mode 100644 index 00000000000..caad0c8a258 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt @@ -0,0 +1,91 @@ +Regulator of AMS AS3722 PMIC. +Name of the regulator subnode must be "regulators". + +Optional properties: +-------------------- +The input supply of regulators are the optional properties on the +regulator node. The AS3722 is having 7 DCDC step-down regulators as +sd[0-6], 10 LDOs as ldo[0-7], ldo[9-11]. The input supply of these +regulators are provided through following properties: +vsup-sd2-supply: Input supply for SD2. +vsup-sd3-supply: Input supply for SD3. +vsup-sd4-supply: Input supply for SD4. +vsup-sd5-supply: Input supply for SD5. +vin-ldo0-supply: Input supply for LDO0. +vin-ldo1-6-supply: Input supply for LDO1 and LDO6. +vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7. +vin-ldo3-4-supply: Input supply for LDO3 and LDO4. +vin-ldo9-10-supply: Input supply for LDO9 and LDO10. +vin-ldo11-supply: Input supply for LDO11. + +Optional nodes: +-------------- +- regulators : Must contain a sub-node per regulator from the list below. + Each sub-node should contain the constraints and initialization + information for that regulator. See regulator.txt for a + description of standard properties for these sub-nodes. + Additional custom properties are listed below. + sd[0-6], ldo[0-7], ldo[9-11]. + + Optional sub-node properties: + ---------------------------- + ams,ext-control: External control of the rail. The option of + this properties will tell which external input is + controlling this rail. Valid values are 0, 1, 2 ad 3. + 0: There is no external control of this rail. + 1: Rail is controlled by ENABLE1 input pin. + 2: Rail is controlled by ENABLE2 input pin. + 3: Rail is controlled by ENABLE3 input pin. + ams,enable-tracking: Enable tracking with SD1, only supported + by LDO3. + +Example: +------- + ams3722: ams3722 { + compatible = "ams,as3722"; + reg = <0x40>; + ... + + regulators { + vsup-sd2-supply = <...>; + ... + + sd0 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + ams,ext-control = <1>; + }; + + sd2 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + sd4 { + regulator-name = "avdd-hdmi-pex"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + }; + + sd5 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + .... + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt new file mode 100644 index 00000000000..f120f229d67 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/da9210.txt @@ -0,0 +1,21 @@ +* Dialog Semiconductor DA9210 Voltage Regulator + +Required properties: + +- compatible: must be "diasemi,da9210" +- reg: the i2c slave address of the regulator. It should be 0x68. + +Any standard regulator properties can be used to configure the single da9210 +DCDC. + +Example: + + da9210@68 { + compatible = "diasemi,da9210"; + reg = <0x68>; + + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index 875639ae060..42e6b6bc48f 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -26,11 +26,17 @@ Optional nodes: For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP, smps45, smps457, smps7 depending on variant, smps6, smps[8-9], - smps10_out2, smps10_out1, do[1-9], ldoln, ldousb. + smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb. Optional sub-node properties: ti,warm-reset - maintain voltage during warm reset(boolean) - ti,roof-floor - control voltage selection by pin(boolean) + ti,roof-floor - This takes as optional argument on platform supporting + the rail from desired external control. If there is no argument then + it will be assume that it is controlled by NSLEEP pin. + The valid value for external pins are: + ENABLE1 then 1, + ENABLE2 then 2 or + NSLEEP then 3. ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto, 2 - eco, 3 - forced pwm ti,smps-range - OTP has the wrong range set for the hardware so override @@ -61,7 +67,7 @@ pmic { regulator-always-on; regulator-boot-on; ti,warm-reset; - ti,roof-floor; + ti,roof-floor = <1>; /* ENABLE1 control */ ti,mode-sleep = <0>; ti,smps-range = <1>; }; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 2bd8f097876..e2c7f1e7251 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -14,6 +14,11 @@ Optional properties: - regulator-ramp-delay: ramp delay for regulator(in uV/uS) For hardwares which support disabling ramp rate, it should be explicitly intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. +- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply + rail to reach the target voltage, plus/minus whatever tolerance the board + design requires. This property describes the total system ramp time + required due to the combination of internal ramping of the regulator itself, + and board design issues such as trace capacitance and load on the supply. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index fcb34a5697e..3d9c2a76623 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -283,6 +283,7 @@ REGULATOR devm_regulator_get() devm_regulator_put() devm_regulator_bulk_get() + devm_regulator_register() CLOCK devm_clk_get() diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 1a911df9e45..aca7d16e195 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -310,10 +310,6 @@ static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDDL", "spi0.1"), REGULATOR_SUPPLY("SPKVDDR", "spi0.1"), - REGULATOR_SUPPLY("SPKVDDL", "wm5102-codec"), - REGULATOR_SUPPLY("SPKVDDR", "wm5102-codec"), - REGULATOR_SUPPLY("SPKVDDL", "wm5110-codec"), - REGULATOR_SUPPLY("SPKVDDR", "wm5110-codec"), REGULATOR_SUPPLY("DC1VDD", "0-0034"), REGULATOR_SUPPLY("DC2VDD", "0-0034"), @@ -653,14 +649,6 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] = { REGULATOR_SUPPLY("DBVDD3", "spi0.1"), REGULATOR_SUPPLY("LDOVDD", "spi0.1"), REGULATOR_SUPPLY("CPVDD", "spi0.1"), - - REGULATOR_SUPPLY("DBVDD2", "wm5102-codec"), - REGULATOR_SUPPLY("DBVDD3", "wm5102-codec"), - REGULATOR_SUPPLY("CPVDD", "wm5102-codec"), - - REGULATOR_SUPPLY("DBVDD2", "wm5110-codec"), - REGULATOR_SUPPLY("DBVDD3", "wm5110-codec"), - REGULATOR_SUPPLY("CPVDD", "wm5110-codec"), }; static struct regulator_init_data pvdd_1v8 = { diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 5ac3aa48473..022b1863d36 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -569,13 +569,25 @@ static struct mfd_cell early_devs[] = { { .name = "arizona-ldo1" }, }; +static const char *wm5102_supplies[] = { + "DBVDD2", + "DBVDD3", + "CPVDD", + "SPKVDDL", + "SPKVDDR", +}; + static struct mfd_cell wm5102_devs[] = { { .name = "arizona-micsupp" }, { .name = "arizona-extcon" }, { .name = "arizona-gpio" }, { .name = "arizona-haptics" }, { .name = "arizona-pwm" }, - { .name = "wm5102-codec" }, + { + .name = "wm5102-codec", + .parent_supplies = wm5102_supplies, + .num_parent_supplies = ARRAY_SIZE(wm5102_supplies), + }, }; static struct mfd_cell wm5110_devs[] = { @@ -584,7 +596,17 @@ static struct mfd_cell wm5110_devs[] = { { .name = "arizona-gpio" }, { .name = "arizona-haptics" }, { .name = "arizona-pwm" }, - { .name = "wm5110-codec" }, + { + .name = "wm5110-codec", + .parent_supplies = wm5102_supplies, + .num_parent_supplies = ARRAY_SIZE(wm5102_supplies), + }, +}; + +static const char *wm8997_supplies[] = { + "DBVDD2", + "CPVDD", + "SPKVDD", }; static struct mfd_cell wm8997_devs[] = { @@ -593,7 +615,11 @@ static struct mfd_cell wm8997_devs[] = { { .name = "arizona-gpio" }, { .name = "arizona-haptics" }, { .name = "arizona-pwm" }, - { .name = "wm8997-codec" }, + { + .name = "wm8997-codec", + .parent_supplies = wm8997_supplies, + .num_parent_supplies = ARRAY_SIZE(wm8997_supplies), + }, }; int arizona_dev_init(struct arizona *arizona) diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index f421586f29f..adc8ea36e7c 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -20,6 +20,7 @@ #include <linux/module.h> #include <linux/irqdomain.h> #include <linux/of.h> +#include <linux/regulator/consumer.h> static struct device_type mfd_dev_type = { .name = "mfd_device", @@ -99,6 +100,13 @@ static int mfd_add_device(struct device *parent, int id, pdev->dev.dma_mask = parent->dma_mask; pdev->dev.dma_parms = parent->dma_parms; + ret = devm_regulator_bulk_register_supply_alias( + &pdev->dev, cell->parent_supplies, + parent, cell->parent_supplies, + cell->num_parent_supplies); + if (ret < 0) + goto fail_res; + if (parent->of_node && cell->of_compatible) { for_each_child_of_node(parent->of_node, np) { if (of_device_is_compatible(np, cell->of_compatible)) { @@ -112,12 +120,12 @@ static int mfd_add_device(struct device *parent, int id, ret = platform_device_add_data(pdev, cell->platform_data, cell->pdata_size); if (ret) - goto fail_res; + goto fail_alias; } ret = mfd_platform_add_cell(pdev, cell); if (ret) - goto fail_res; + goto fail_alias; for (r = 0; r < cell->num_resources; r++) { res[r].name = cell->resources[r].name; @@ -152,17 +160,17 @@ static int mfd_add_device(struct device *parent, int id, if (!cell->ignore_resource_conflicts) { ret = acpi_check_resource_conflict(&res[r]); if (ret) - goto fail_res; + goto fail_alias; } } ret = platform_device_add_resources(pdev, res, cell->num_resources); if (ret) - goto fail_res; + goto fail_alias; ret = platform_device_add(pdev); if (ret) - goto fail_res; + goto fail_alias; if (cell->pm_runtime_no_callbacks) pm_runtime_no_callbacks(&pdev->dev); @@ -171,6 +179,10 @@ static int mfd_add_device(struct device *parent, int id, return 0; +fail_alias: + devm_regulator_bulk_unregister_supply_alias(&pdev->dev, + cell->parent_supplies, + cell->num_parent_supplies); fail_res: kfree(res); fail_device: diff --git a/drivers/regulator/88pm800.c b/drivers/regulator/88pm800.c index 3459f60dcfd..d333f7eac10 100644 --- a/drivers/regulator/88pm800.c +++ b/drivers/regulator/88pm800.c @@ -141,18 +141,14 @@ struct pm800_regulators { /* Ranges are sorted in ascending order. */ static const struct regulator_linear_range buck1_volt_range[] = { - { .min_uV = 600000, .max_uV = 1587500, .min_sel = 0, .max_sel = 0x4f, - .uV_step = 12500 }, - { .min_uV = 1600000, .max_uV = 1800000, .min_sel = 0x50, - .max_sel = 0x54, .uV_step = 50000 }, + REGULATOR_LINEA |