diff options
87 files changed, 2827 insertions, 165 deletions
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index 9c27e5125dd..7514dbf0a67 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -446,4 +446,21 @@ X!Idrivers/video/console/fonts.c !Edrivers/i2c/i2c-core.c </chapter> + <chapter id="hsi"> + <title>High Speed Synchronous Serial Interface (HSI)</title> + + <para> + High Speed Synchronous Serial Interface (HSI) is a + serial interface mainly used for connecting application + engines (APE) with cellular modem engines (CMT) in cellular + handsets. + + HSI provides multiplexing for up to 16 logical channels, + low-latency and full duplex communication. + </para> + +!Iinclude/linux/hsi/hsi.h +!Edrivers/hsi/hsi.c + </chapter> + </book> diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 5c51ed406d1..cefd3d8bbd1 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -217,7 +217,7 @@ and name space for cpusets, with a minimum of additional kernel code. The cpus and mems files in the root (top_cpuset) cpuset are read-only. The cpus file automatically tracks the value of -cpu_online_map using a CPU hotplug notifier, and the mems file +cpu_online_mask using a CPU hotplug notifier, and the mems file automatically tracks the value of node_states[N_HIGH_MEMORY]--i.e., nodes with memory--using the cpuset_track_online_nodes() hook. diff --git a/Documentation/cpu-hotplug.txt b/Documentation/cpu-hotplug.txt index a20bfd415e4..66ef8f35613 100644 --- a/Documentation/cpu-hotplug.txt +++ b/Documentation/cpu-hotplug.txt @@ -47,7 +47,7 @@ maxcpus=n Restrict boot time cpus to n. Say if you have 4 cpus, using other cpus later online, read FAQ's for more info. additional_cpus=n (*) Use this to limit hotpluggable cpus. This option sets - cpu_possible_map = cpu_present_map + additional_cpus + cpu_possible_mask = cpu_present_mask + additional_cpus cede_offline={"off","on"} Use this option to disable/enable putting offlined processors to an extended H_CEDE state on @@ -64,11 +64,11 @@ should only rely on this to count the # of cpus, but *MUST* not rely on the apicid values in those tables for disabled apics. In the event BIOS doesn't mark such hot-pluggable cpus as disabled entries, one could use this parameter "additional_cpus=x" to represent those cpus in the -cpu_possible_map. +cpu_possible_mask. possible_cpus=n [s390,x86_64] use this to set hotpluggable cpus. This option sets possible_cpus bits in - cpu_possible_map. Thus keeping the numbers of bits set + cpu_possible_mask. Thus keeping the numbers of bits set constant even if the machine gets rebooted. CPU maps and such @@ -76,7 +76,7 @@ CPU maps and such [More on cpumaps and primitive to manipulate, please check include/linux/cpumask.h that has more descriptive text.] -cpu_possible_map: Bitmap of possible CPUs that can ever be available in the +cpu_possible_mask: Bitmap of possible CPUs that can ever be available in the system. This is used to allocate some boot time memory for per_cpu variables that aren't designed to grow/shrink as CPUs are made available or removed. Once set during boot time discovery phase, the map is static, i.e no bits @@ -84,13 +84,13 @@ are added or removed anytime. Trimming it accurately for your system needs upfront can save some boot time memory. See below for how we use heuristics in x86_64 case to keep this under check. -cpu_online_map: Bitmap of all CPUs currently online. Its set in __cpu_up() +cpu_online_mask: Bitmap of all CPUs currently online. Its set in __cpu_up() after a cpu is available for kernel scheduling and ready to receive interrupts from devices. Its cleared when a cpu is brought down using __cpu_disable(), before which all OS services including interrupts are migrated to another target CPU. -cpu_present_map: Bitmap of CPUs currently present in the system. Not all +cpu_present_mask: Bitmap of CPUs currently present in the system. Not all of them may be online. When physical hotplug is processed by the relevant subsystem (e.g ACPI) can change and new bit either be added or removed from the map depending on the event is hot-add/hot-remove. There are currently @@ -99,22 +99,22 @@ at which time hotplug is disabled. You really dont need to manipulate any of the system cpu maps. They should be read-only for most use. When setting up per-cpu resources almost always use -cpu_possible_map/for_each_possible_cpu() to iterate. +cpu_possible_mask/for_each_possible_cpu() to iterate. Never use anything other than cpumask_t to represent bitmap of CPUs. #include <linux/cpumask.h> - for_each_possible_cpu - Iterate over cpu_possible_map - for_each_online_cpu - Iterate over cpu_online_map - for_each_present_cpu - Iterate over cpu_present_map + for_each_possible_cpu - Iterate over cpu_possible_mask + for_each_online_cpu - Iterate over cpu_online_mask + for_each_present_cpu - Iterate over cpu_present_mask for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask. #include <linux/cpu.h> get_online_cpus() and put_online_cpus(): The above calls are used to inhibit cpu hotplug operations. While the -cpu_hotplug.refcount is non zero, the cpu_online_map will not change. +cpu_hotplug.refcount is non zero, the cpu_online_mask will not change. If you merely need to avoid cpus going away, you could also use preempt_disable() and preempt_enable() for those sections. Just remember the critical section cannot call any diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 3b7488fc337..e34b531dc31 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -225,6 +225,7 @@ Code Seq#(hex) Include File Comments 'j' 00-3F linux/joystick.h 'k' 00-0F linux/spi/spidev.h conflict! 'k' 00-05 video/kyro.h conflict! +'k' 10-17 linux/hsi/hsi_char.h HSI character device 'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system <http://web.archive.org/web/*/http://mikonos.dia.unisa.it/tcfs> 'l' 40-7F linux/udf_fs_i.h in development: diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 4087a569b43..50d438db1f6 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -450,7 +450,7 @@ setup_smp(void) smp_num_probed = 1; } - printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n", + printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n", smp_num_probed, cpumask_bits(cpu_present_mask)[0]); } diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index ab1869dac97..4dd41fc9e23 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -152,7 +152,7 @@ int __kprobes __arch_disarm_kprobe(void *p) void __kprobes arch_disarm_kprobe(struct kprobe *p) { - stop_machine(__arch_disarm_kprobe, p, &cpu_online_map); + stop_machine(__arch_disarm_kprobe, p, cpu_online_mask); } void __kprobes arch_remove_kprobe(struct kprobe *p) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 2cee7d1eb95..addbbe8028c 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -349,7 +349,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) * re-initialize the map in platform_smp_prepare_cpus() if * present != possible (e.g. physical hotplug). */ - init_cpu_present(&cpu_possible_map); + init_cpu_present(cpu_possible_mask); /* * Initialise the SCU if there are more than one CPU @@ -581,8 +581,9 @@ void smp_send_stop(void) unsigned long timeout; if (num_online_cpus() > 1) { - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); + struct cpumask mask; + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); smp_cross_call(&mask, IPI_CPU_STOP); } diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c index 15d1fd22bbc..9b44a9e2d05 100644 --- a/arch/hexagon/kernel/smp.c +++ b/arch/hexagon/kernel/smp.c @@ -35,7 +35,7 @@ #define BASE_IPI_IRQ 26 /* - * cpu_possible_map needs to be filled out prior to setup_per_cpu_areas + * cpu_possible_mask needs to be filled out prior to setup_per_cpu_areas * (which is prior to any of our smp_prepare_cpu crap), in order to set * up the... per_cpu areas. */ @@ -208,7 +208,7 @@ int __cpuinit __cpu_up(unsigned int cpu) stack_start = ((void *) thread) + THREAD_SIZE; __vmstart(start_secondary, stack_start); - while (!cpu_isset(cpu, cpu_online_map)) + while (!cpu_online(cpu)) barrier(); return 0; @@ -229,7 +229,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* Right now, let's just fake it. */ for (i = 0; i < max_cpus; i++) - cpu_set(i, cpu_present_map); + set_cpu_present(i, true); /* Also need to register the interrupts for IPI */ if (max_cpus > 1) @@ -269,5 +269,5 @@ void smp_start_cpus(void) int i; for (i = 0; i < NR_CPUS; i++) - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); } diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index ac795d311f4..6f38b6120d9 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -839,7 +839,7 @@ static __init int setup_additional_cpus(char *s) early_param("additional_cpus", setup_additional_cpus); /* - * cpu_possible_map should be static, it cannot change as CPUs + * cpu_possible_mask should be static, it cannot change as CPUs * are onlined, or offlined. The reason is per-cpu data-structures * are allocated by some modules at init time, and dont expect to * do this dynamically on cpu arrival/departure. diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index c3e2b85c3b0..97e7ce9b50e 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -78,7 +78,7 @@ static inline void octeon_send_ipi_mask(const struct cpumask *mask, } /** - * Detect available CPUs, populate cpu_possible_map + * Detect available CPUs, populate cpu_possible_mask */ static void octeon_smp_hotplug_setup(void) { @@ -268,7 +268,7 @@ static int octeon_cpu_disable(void) spin_lock(&smp_reserve_lock); - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); cpu_clear(cpu, cpu_callin_map); local_irq_disable(); fixup_irqs(); diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c index 802e6160f37..33f63bab478 100644 --- a/arch/mips/kernel/mips-mt-fpaff.c +++ b/arch/mips/kernel/mips-mt-fpaff.c @@ -173,7 +173,7 @@ asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len, if (retval) goto out_unlock; - cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map); + cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask); out_unlock: read_unlock(&tasklist_lock); diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index e309665b6c8..f8b2c592514 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -25,7 +25,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) int i; #ifdef CONFIG_SMP - if (!cpu_isset(n, cpu_online_map)) + if (!cpu_online(n)) return 0; #endif diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index ca673569fd2..3046e298600 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -317,7 +317,7 @@ static int bmips_cpu_disable(void) pr_info("SMP: CPU%d is offline\n", cpu); - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); cpu_clear(cpu, cpu_callin_map); local_flush_tlb_all(); diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 9c1cce9de35..ba9376bf52a 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -148,7 +148,7 @@ static void stop_this |