diff options
43 files changed, 8458 insertions, 185 deletions
diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h index 8f39aa5b26e..bbb16e0aa1f 100644 --- a/arch/arm/plat-samsung/include/plat/regs-fb.h +++ b/arch/arm/plat-samsung/include/plat/regs-fb.h @@ -91,6 +91,9 @@ #define VIDCON1_VSTATUS_BACKPORCH (0x1 << 13) #define VIDCON1_VSTATUS_ACTIVE (0x2 << 13) #define VIDCON1_VSTATUS_FRONTPORCH (0x0 << 13) +#define VIDCON1_VCLK_MASK (0x3 << 9) +#define VIDCON1_VCLK_HOLD (0x0 << 9) +#define VIDCON1_VCLK_RUN (0x1 << 9) #define VIDCON1_INV_VCLK (1 << 7) #define VIDCON1_INV_HSYNC (1 << 6) @@ -384,3 +387,9 @@ #define WPALCON_W0PAL_16BPP_A555 (0x5 << 0) #define WPALCON_W0PAL_16BPP_565 (0x6 << 0) +/* Blending equation control */ +#define BLENDCON (0x260) +#define BLENDCON_NEW_MASK (1 << 0) +#define BLENDCON_NEW_8BIT_ALPHA_VALUE (1 << 0) +#define BLENDCON_NEW_4BIT_ALPHA_VALUE (0 << 0) + diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6ca0c407c14..8951cbd2d2f 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1123,6 +1123,18 @@ config FB_RIVA_BACKLIGHT help Say Y here if you want to control the backlight of your display. +config FB_I740 + tristate "Intel740 support (EXPERIMENTAL)" + depends on EXPERIMENTAL && FB && PCI + select FB_MODE_HELPERS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select VGASTATE + select FB_DDC + help + This driver supports graphics cards based on Intel740 chip. + config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL @@ -2411,7 +2423,7 @@ config FB_PUV3_UNIGFX source "drivers/video/omap/Kconfig" source "drivers/video/omap2/Kconfig" - +source "drivers/video/exynos/Kconfig" source "drivers/video/backlight/Kconfig" if VT diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 142606814d9..9356add945b 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_VT) += console/ obj-$(CONFIG_LOGO) += logo/ obj-y += backlight/ +obj-$(CONFIG_EXYNOS_VIDEO) += exynos/ + obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o @@ -37,6 +39,7 @@ obj-$(CONFIG_FB_GRVGA) += grvga.o obj-$(CONFIG_FB_PM2) += pm2fb.o obj-$(CONFIG_FB_PM3) += pm3fb.o +obj-$(CONFIG_FB_I740) += i740fb.o obj-$(CONFIG_FB_MATROX) += matrox/ obj-$(CONFIG_FB_RIVA) += riva/ obj-$(CONFIG_FB_NVIDIA) += nvidia/ diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index e40c00f2c2b..d99505b1637 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -421,24 +421,18 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, var->red.length = var->green.length = var->blue.length = var->bits_per_pixel; break; - case 15: case 16: if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) { /* RGB:565 mode */ var->red.offset = 11; var->blue.offset = 0; - var->green.length = 6; - } else if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB555) { - var->red.offset = 10; - var->blue.offset = 0; - var->green.length = 5; } else { - /* BGR:555 mode */ + /* BGR:565 mode */ var->red.offset = 0; - var->blue.offset = 10; - var->green.length = 5; + var->blue.offset = 11; } var->green.offset = 5; + var->green.length = 6; var->red.length = var->blue.length = 5; break; case 32: diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c index de9da6774fd..befcbd8ef01 100644 --- a/drivers/video/au1100fb.c +++ b/drivers/video/au1100fb.c @@ -477,7 +477,8 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev) u32 sys_clksrc; /* Allocate new device private */ - fbdev = kzalloc(sizeof(struct au1100fb_device), GFP_KERNEL); + fbdev = devm_kzalloc(&dev->dev, sizeof(struct au1100fb_device), + GFP_KERNEL); if (!fbdev) { print_err("fail to allocate device private record"); return -ENOMEM; @@ -498,8 +499,9 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev) au1100fb_fix.mmio_start = regs_res->start; au1100fb_fix.mmio_len = resource_size(regs_res); - if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len, - DRIVER_NAME)) { + if (!devm_request_mem_region(au1100fb_fix.mmio_start, + au1100fb_fix.mmio_len, + DRIVER_NAME)) { print_err("fail to lock memory region at 0x%08lx", au1100fb_fix.mmio_start); return -EBUSY; @@ -514,8 +516,9 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev) fbdev->fb_len = fbdev->panel->xres * fbdev->panel->yres * (fbdev->panel->bpp >> 3) * AU1100FB_NBR_VIDEO_BUFFERS; - fbdev->fb_mem = dma_alloc_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), - &fbdev->fb_phys, GFP_KERNEL); + fbdev->fb_mem = dmam_alloc_coherent(&dev->dev, &dev->dev, + PAGE_ALIGN(fbdev->fb_len), + &fbdev->fb_phys, GFP_KERNEL); if (!fbdev->fb_mem) { print_err("fail to allocate frambuffer (size: %dK))", fbdev->fb_len / 1024); @@ -557,14 +560,14 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev) fbdev->info.fbops = &au1100fb_ops; fbdev->info.fix = au1100fb_fix; - if (!(fbdev->info.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL))) { + fbdev->info.pseudo_palette = + devm_kzalloc(&dev->dev, sizeof(u32) * 16, GFP_KERNEL); + if (!fbdev->info.pseudo_palette) return -ENOMEM; - } if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) { print_err("Fail to allocate colormap (%d entries)", AU1100_LCD_NBR_PALETTE_ENTRIES); - kfree(fbdev->info.pseudo_palette); return -EFAULT; } @@ -582,9 +585,6 @@ static int __devinit au1100fb_drv_probe(struct platform_device *dev) return 0; failed: - if (fbdev->regs) { - release_mem_region(fbdev->regs_phys, fbdev->regs_len); - } if (fbdev->fb_mem) { dma_free_noncoherent(&dev->dev, fbdev->fb_len, fbdev->fb_mem, fbdev->fb_phys); @@ -592,10 +592,9 @@ failed: if (fbdev->info.cmap.len != 0) { fb_dealloc_cmap(&fbdev->info.cmap); } - kfree(fbdev); platform_set_drvdata(dev, NULL); - return 0; + return -ENODEV; } int au1100fb_drv_remove(struct platform_device *dev) @@ -615,14 +614,7 @@ int au1100fb_drv_remove(struct platform_device *dev) /* Clean up all probe data */ unregister_framebuffer(&fbdev->info); - release_mem_region(fbdev->regs_phys, fbdev->regs_len); - - dma_free_coherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), fbdev->fb_mem, - fbdev->fb_phys); - fb_dealloc_cmap(&fbdev->info.cmap); - kfree(fbdev->info.pseudo_palette); - kfree((void*)fbdev); return 0; } diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c index 04e4479d5af..3e9a773db09 100644 --- a/drivers/video/au1200fb.c +++ b/drivers/video/au1200fb.c @@ -1724,7 +1724,7 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev) /* Allocate the framebuffer to the maximum screen size */ fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8; - fbdev->fb_mem = dma_alloc_noncoherent(&dev->dev, + fbdev->fb_mem = dmam_alloc_noncoherent(&dev->dev, &dev->dev, PAGE_ALIGN(fbdev->fb_len), &fbdev->fb_phys, GFP_KERNEL); if (!fbdev->fb_mem) { @@ -1788,9 +1788,6 @@ static int __devinit au1200fb_drv_probe(struct platform_device *dev) failed: /* NOTE: This only does the current plane/window that failed; others are still active */ - if (fbdev->fb_mem) - dma_free_noncoherent(&dev->dev, PAGE_ALIGN(fbdev->fb_len), - fbdev->fb_mem, fbdev->fb_phys); if (fbi) { if (fbi->cmap.len != 0) fb_dealloc_cmap(&fbi->cmap); @@ -1817,10 +1814,6 @@ static int __devexit au1200fb_drv_remove(struct platform_device *dev) /* Clean up all probe data */ unregister_framebuffer(fbi); - if (fbdev->fb_mem) - dma_free_noncoherent(&dev->dev, - PAGE_ALIGN(fbdev->fb_len), - fbdev->fb_mem, fbdev->fb_phys); if (fbi->cmap.len != 0) fb_dealloc_cmap(&fbi->cmap); kfree(fbi->pseudo_palette); diff --git a/drivers/video/bf537-lq035.c b/drivers/video/bf537-lq035.c index bea53c1a495..befbc80d11f 100644 --- a/drivers/video/bf537-lq035.c +++ b/drivers/video/bf537-lq035.c @@ -383,23 +383,19 @@ static int __devinit request_ports(void) } #if (defined(UD) && defined(LBR)) - if (gpio_request(UD, KBUILD_MODNAME)) { + if (gpio_request_one(UD, GPIOF_OUT_INIT_LOW, KBUILD_MODNAME)) { pr_err("requesting GPIO %d failed\n", UD); return -EBUSY; } - if (gpio_request(LBR, KBUILD_MODNAME)) { + if (gpio_request_one(LBR, GPIOF_OUT_INIT_HIGH, KBUILD_MODNAME)) { pr_err("requesting GPIO %d failed\n", LBR); gpio_free(UD); return -EBUSY; } - - gpio_direction_output(UD, 0); - gpio_direction_output(LBR, 1); - #endif - if (gpio_request(MOD, KBUILD_MODNAME)) { + if (gpio_request_one(MOD, GPIOF_OUT_INIT_HIGH, KBUILD_MODNAME)) { pr_err("requesting GPIO %d failed\n", MOD); #if (defined(UD) && defined(LBR)) gpio_free(LBR); @@ -408,8 +404,6 @@ static int __devinit request_ports(void) return -EBUSY; } - gpio_direction_output(MOD, 1); - SSYNC(); return 0; } diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index 46b03f53985..dc2f0047769 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -240,7 +240,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) u16 eppi_req_18[] = EPPI0_18; u16 disp = fbi->mach_info->disp; - if (gpio_request(disp, DRIVER_NAME)) { + if (gpio_request_one(disp, GPIOF_OUT_INIT_HIGH, DRIVER_NAME)) { printk(KERN_ERR "Requesting GPIO %d failed\n", disp); return -EFAULT; } @@ -263,8 +263,6 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) } } - gpio_direction_output(disp, 1); - return 0; } diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c index c633068372c..86922ac8441 100644 --- a/drivers/video/bfin-lq035q1-fb.c +++ b/drivers/video/bfin-lq035q1-fb.c @@ -365,10 +365,10 @@ static int __devinit bfin_lq035q1_request_ports(struct platform_device *pdev, * Drive PPI_FS3 Low */ if (ANOMALY_05000400) { - int ret = gpio_request(P_IDENT(P_PPI0_FS3), "PPI_FS3"); + int ret = gpio_request_one(P_IDENT(P_PPI0_FS3), + GPIOF_OUT_INIT_LOW, "PPI_FS3"); if (ret) return ret; - gpio_direction_output(P_IDENT(P_PPI0_FS3), 0); } if (ppi16) @@ -716,14 +716,14 @@ static int __devinit bfin_lq035q1_probe(struct platform_device *pdev) } if (info->disp_info->use_bl) { - ret = gpio_request(info->disp_info->gpio_bl, "LQ035 Backlight"); + ret = gpio_request_one(info->disp_info->gpio_bl, + GPIOF_OUT_INIT_LOW, "LQ035 Backlight"); if (ret) { dev_err(&pdev->dev, "failed to request GPIO %d\n", info->disp_info->gpio_bl); goto out9; } - gpio_direction_output(info->disp_info->gpio_bl, 0); } ret = register_framebuffer(fbinfo); diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c index 811dd7f6aa4..c9928142921 100644 --- a/drivers/video/bfin_adv7393fb.c +++ b/drivers/video/bfin_adv7393fb.c @@ -411,12 +411,13 @@ static int __devinit bfin_adv7393_fb_probe(struct i2c_client *client, /* Workaround "PPI Does Not Start Properly In Specific Mode" */ if (ANOMALY_05000400) { - if (gpio_request(P_IDENT(P_PPI0_FS3), "PPI0_FS3")) { + ret = gpio_request_one(P_IDENT(P_PPI0_FS3), GPIOF_OUT_INIT_LOW, + "PPI0_FS3") + if (ret) { dev_err(&client->dev, "PPI0_FS3 GPIO request failed\n"); ret = -EBUSY; goto out_8; } - gpio_direction_output(P_IDENT(P_PPI0_FS3), 0); } if (peripheral_request_list(ppi_pins, DRIVER_NAME)) { diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 29577bf1f55..dd80386b0ed 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -32,6 +32,7 @@ #include <linux/console.h> #include <linux/slab.h> #include <video/da8xx-fb.h> +#include <asm/div64.h> #define DRIVER_NAME "da8xx_lcdc" @@ -161,6 +162,7 @@ struct da8xx_fb_par { int vsync_timeout; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; + unsigned int lcd_fck_rate; #endif void (*panel_power_ctrl)(int); }; @@ -174,7 +176,6 @@ static struct fb_var_screeninfo da8xx_fb_var __devinitdata = { .activate = 0, .height = -1, .width = -1, - .pixclock = 46666, /* 46us - AUO display */ .accel_flags = 0, .left_margin = LEFT_MARGIN, .right_margin = RIGHT_MARGIN, @@ -840,11 +841,13 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb, struct da8xx_fb_par *par; par = container_of(nb, struct da8xx_fb_par, freq_transition); - if (val == CPUFREQ_PRECHANGE) { - lcd_disable_raster(); - } else if (val == CPUFREQ_POSTCHANGE) { - lcd_calc_clk_divider(par); - lcd_enable_raster(); + if (val == CPUFREQ_POSTCHANGE) { + if (par->lcd_fck_rate != clk_get_rate(par->lcdc_clk)) { + par->lcd_fck_rate = clk_get_rate(par->lcdc_clk); + lcd_disable_raster(); + lcd_calc_clk_divider(par); + lcd_enable_raster(); + } } return 0; @@ -1048,6 +1051,22 @@ static struct fb_ops da8xx_fb_ops = { .fb_blank = cfb_blank, }; +/* Calculate and return pixel clock period in pico seconds */ +static unsigned int da8xxfb_pixel_clk_period(struct da8xx_fb_par *par) +{ + unsigned int lcd_clk, div; + unsigned int configured_pix_clk; + unsigned long long pix_clk_period_picosec = 1000000000000ULL; + + lcd_clk = clk_get_rate(par->lcdc_clk); + div = lcd_clk / par->pxl_clk; + configured_pix_clk = (lcd_clk / div); + + do_div(pix_clk_period_picosec, configured_pix_clk); + + return pix_clk_period_picosec; +} + static int __devinit fb_probe(struct platform_device *device) { struct da8xx_lcdc_platform_data *fb_pdata = @@ -1137,6 +1156,9 @@ static int __devinit fb_probe(struct platform_device *device) par = da8xx_fb_info->par; par->lcdc_clk = fb_clk; +#ifdef CONFIG_CPU_FREQ + par->lcd_fck_rate = clk_get_rate(fb_clk); +#endif par->pxl_clk = lcdc_info->pxl_clk; if (fb_pdata->panel_power_ctrl) { par->panel_power_ctrl = fb_pdata->panel_power_ctrl; @@ -1209,6 +1231,7 @@ static int __devinit fb_probe(struct platform_device *device) da8xx_fb_var.hsync_len = lcdc_info->hsw; da8xx_fb_var.vsync_len = lcdc_info->vsw; + da8xx_fb_var.pixclock = da8xxfb_pixel_clk_period(par); /* Initialize fbinfo */ da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT; @@ -1264,8 +1287,8 @@ static int __devinit fb_probe(struct platform_device *device) irq_freq: #ifdef CONFIG_CPU_FREQ lcd_da8xx_cpufreq_deregister(par); -#endif err_cpu_freq: +#endif unregister_framebuffer(da8xx_fb_info); err_dealloc_cmap: diff --git a/drivers/video/exynos/Kconfig b/drivers/video/exynos/Kconfig new file mode 100644 index 00000000000..1b035b2eb6b --- /dev/null +++ b/drivers/video/exynos/Kconfig @@ -0,0 +1,37 @@ +# +# Exynos Video configuration +# + +menuconfig EXYNOS_VIDEO + bool "Exynos Video driver support" + help + This enables support for EXYNOS Video device. + +if EXYNOS_VIDEO + +# +# MIPI DSI driver +# + +config EXYNOS_MIPI_DSI + bool "EXYNOS MIPI DSI driver support." + depends on ARCH_S5PV210 || ARCH_EXYNOS + help + This enables support for MIPI-DSI device. + +config EXYNOS_LCD_S6E8AX0 + bool "S6E8AX0 MIPI AMOLED LCD Driver" + depends on (EXYNOS_MIPI_DSI && BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE) + default n + help + If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its + LCD control driver. + +config EXYNOS_DP + bool "EXYNOS DP driver support" + depends on ARCH_EXYNOS + default n + help + This enables support for DP device. + +endif # EXYNOS_VIDEO diff --git a/drivers/video/exynos/Makefile b/drivers/video/exynos/Makefile new file mode 100644 index 00000000000..ec7772e452a --- /dev/null +++ b/drivers/video/exynos/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the exynos video drivers. +# + +obj-$(CONFIG_EXYNOS_MIPI_DSI) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ + exynos_mipi_dsi_lowlevel.o +obj-$(CONFIG_EXYNOS_LCD_S6E8AX0) += s6e8ax0.o +obj-$(CONFIG_EXYNOS_DP) += exynos_dp_core.o exynos_dp_reg.o diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c new file mode 100644 index 00000000000..2a4481cf260 --- /dev/null +++ b/drivers/video/exynos/exynos_dp_core.c @@ -0,0 +1,1058 @@ +/* + * Samsung SoC DP (Display Port) interface driver. + * + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + * Author: Jingoo Han <jg1.han@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#include <video/exynos_dp.h> + +#include <plat/cpu.h> + +#include "exynos_dp_core.h" + +static int exynos_dp_init_dp(struct exynos_dp_device *dp) +{ + exynos_dp_reset(dp); + + /* SW defined function Normal operation */ + exynos_dp_enable_sw_function(dp); + + exynos_dp_config_interrupt(dp); + exynos_dp_init_analog_func(dp); + + exynos_dp_init_hpd(dp); + exynos_dp_init_aux(dp); + + return 0; +} + +static int exynos_dp_detect_hpd(struct exynos_dp_device *dp) +{ + int timeout_loop = 0; + + exynos_dp_init_hpd(dp); + + udelay(200); + + while (exynos_dp_get_plug_in_status(dp) != 0) { + timeout_loop++; + if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) { + dev_err(dp->dev, "failed to get hpd plug status\n"); + return -ETIMEDOUT; + } + udelay(10); + } + + return 0; +} + +static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data) +{ + int i; + unsigned char sum = 0; + + for (i = 0; i < EDID_BLOCK_LENGTH; i++) + sum = sum + edid_data[i]; + + return sum; +} + +static int exynos_dp_read_edid(struct exynos_dp_device *dp) +{ + unsigned char edid[EDID_BLOCK_LENGTH * 2]; + unsigned int extend_block = 0; + unsigned char sum; + unsigned char test_vector; + int retval; + + /* + * EDID device address is 0x50. + * However, if necessary, you must have set upper address + * into E-EDID in I2C device, 0x30. + */ + + /* Read Extension Flag, Number of 128-byte EDID extension blocks */ + exynos_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR, + EDID_EXTENSION_FLAG, + &extend_block); + + if (extend_block > 0) { + dev_dbg(dp->dev, "EDID data includes a single extension!\n"); + + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(dp, I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + if (retval != 0) { + dev_err(dp->dev, "EDID Read failed!\n"); + return -EIO; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + dev_err(dp->dev, "EDID bad checksum!\n"); + return -EIO; + } + + /* Read additional EDID data */ + retval = exynos_dp_read_bytes_from_i2c(dp, + I2C_EDID_DEVICE_ADDR, + EDID_BLOCK_LENGTH, + EDID_BLOCK_LENGTH, + &edid[EDID_BLOCK_LENGTH]); + if (retval != 0) { + dev_err(dp->dev, "EDID Read failed!\n"); + return -EIO; + } + sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); + if (sum != 0) { + dev_err(dp->dev, "EDID bad checksum!\n"); + return -EIO; + } + + exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(dp, + DPCD_ADDR_TEST_EDID_CHECKSUM, + edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(dp, + DPCD_ADDR_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + } else { + dev_info(dp->dev, "EDID data does not include any extensions.\n"); + + /* Read EDID data */ + retval = exynos_dp_read_bytes_from_i2c(dp, + I2C_EDID_DEVICE_ADDR, + EDID_HEADER_PATTERN, + EDID_BLOCK_LENGTH, + &edid[EDID_HEADER_PATTERN]); + if (retval != 0) { + dev_err(dp->dev, "EDID Read failed!\n"); + return -EIO; + } + sum = exynos_dp_calc_edid_check_sum(edid); + if (sum != 0) { + dev_err(dp->dev, "EDID bad checksum!\n"); + return -EIO; + } + + exynos_dp_read_byte_from_dpcd(dp, + DPCD_ADDR_TEST_REQUEST, + &test_vector); + if (test_vector & DPCD_TEST_EDID_READ) { + exynos_dp_write_byte_to_dpcd(dp, + DPCD_ADDR_TEST_EDID_CHECKSUM, + edid[EDID_CHECKSUM]); + exynos_dp_write_byte_to_dpcd(dp, + DPCD_ADDR_TEST_RESPONSE, + DPCD_TEST_EDID_CHECKSUM_WRITE); + } + } + + dev_err(dp->dev, "EDID Read success!\n"); + return 0; +} + +static int exynos_dp_handle_edid(struct exynos_dp_device *dp) +{ + u8 buf[12]; + int i; + int retval; + + /* Read DPCD DPCD_ADDR_DPCD_REV~RECEIVE_PORT1_CAP_1 */ + exynos_dp_read_bytes_from_dpcd(dp, + DPCD_ADDR_DPCD_REV, + 12, buf); + + /* Read EDID */ + for (i = 0; i < 3; i++) { + retval = exynos_dp_read_edid(dp); + if (retval == 0) + break; + } + + return retval; +} + +static void exynos_dp_enable_rx_to_enhanced_mode(struct exynos_dp_device *dp, + bool enable) +{ + u8 data; + + exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, &data); + + if (enable) + exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, + DPCD_ENHANCED_FRAME_EN | + DPCD_LANE_COUNT_SET(data)); + else + exynos_dp_write_byte_to_dpcd(dp, DPCD_ADDR_LANE_COUNT_SET, + DPCD_LANE_COUNT_SET(data)); +} + +static int exynos_dp_is_enhanced_mode_available(struct exynos_dp_device *dp) +{ + u8 data; + int retval; + + exynos_dp_read_byte_from_dpcd(dp, DPCD_ADDR_MAX_LANE_COUNT, &data); + retval = DPCD_ENHANCED_FRAME_CAP(data); + + return retval; +} + +static void exynos_dp_set_enhanced_mode(struct exynos_dp_device *dp) +{ + u8 data; + + data = exynos_dp_is_enhanced_mode_available(dp); + exynos_dp_enable_rx_to_enhanced_mode(dp, data); |