diff options
34 files changed, 1676 insertions, 74 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt new file mode 100644 index 00000000000..191d7bd8a6f --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt @@ -0,0 +1,76 @@ +* Freescale enhanced Direct Memory Access(eDMA) Controller + + The eDMA channels have multiplex capability by programmble memory-mapped +registers. channels are split into two groups, called DMAMUX0 and DMAMUX1, +specific DMA request source can only be multiplexed by any channel of certain +group, DMAMUX0 or DMAMUX1, but not both. + +* eDMA Controller +Required properties: +- compatible : + - "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC +- reg : Specifies base physical address(s) and size of the eDMA registers. + The 1st region is eDMA control register's address and size. + The 2nd and the 3rd regions are programmable channel multiplexing + control register's address and size. +- interrupts : A list of interrupt-specifiers, one for each entry in + interrupt-names. +- interrupt-names : Should contain: + "edma-tx" - the transmission interrupt + "edma-err" - the error interrupt +- #dma-cells : Must be <2>. + The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1). + Specific request source can only be multiplexed by specific channels + group called DMAMUX. + The 2nd cell specifies the request source(slot) ID. + See the SoC's reference manual for all the supported request sources. +- dma-channels : Number of channels supported by the controller +- clock-names : A list of channel group clock names. Should contain: + "dmamux0" - clock name of mux0 group + "dmamux1" - clock name of mux1 group +- clocks : A list of phandle and clock-specifier pairs, one for each entry in + clock-names. + +Optional properties: +- big-endian: If present registers and hardware scatter/gather descriptors + of the eDMA are implemented in big endian mode, otherwise in little + mode. + + +Examples: + +edma0: dma-controller@40018000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x40018000 0x2000>, + <0x40024000 0x1000>, + <0x40025000 0x1000>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, + <0 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clks VF610_CLK_DMAMUX0>, + <&clks VF610_CLK_DMAMUX1>; +}; + + +* DMA clients +DMA client drivers that uses the DMA function must use the format described +in the dma.txt file, using a two-cell specifier for each channel: the 1st +specifies the channel group(DMAMUX) in which this request can be multiplexed, +and the 2nd specifies the request source. + +Examples: + +sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "sai"; + clocks = <&clks VF610_CLK_SAI2>; + dma-names = "tx", "rx"; + dmas = <&edma0 0 21>, + <&edma0 0 20>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt b/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt new file mode 100644 index 00000000000..ecbc96ad36f --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt @@ -0,0 +1,43 @@ +* CSR SiRFSoC DMA controller + +See dma.txt first + +Required properties: +- compatible: Should be "sirf,prima2-dmac" or "sirf,marco-dmac" +- reg: Should contain DMA registers location and length. +- interrupts: Should contain one interrupt shared by all channel +- #dma-cells: must be <1>. used to represent the number of integer + cells in the dmas property of client device. +- clocks: clock required + +Example: + +Controller: +dmac0: dma-controller@b00b0000 { + compatible = "sirf,prima2-dmac"; + reg = <0xb00b0000 0x10000>; + interrupts = <12>; + clocks = <&clks 24>; + #dma-cells = <1>; +}; + + +Client: +Fill the specific dma request line in dmas. In the below example, spi0 read +channel request line is 9 of the 2nd dma controller, while write channel uses +4 of the 2nd dma controller; spi1 read channel request line is 12 of the 1st +dma controller, while write channel uses 13 of the 1st dma controller: + +spi0: spi@b00d0000 { + compatible = "sirf,prima2-spi"; + dmas = <&dmac1 9>, + <&dmac1 4>; + dma-names = "rx", "tx"; +}; + +spi1: spi@b0170000 { + compatible = "sirf,prima2-spi"; + dmas = <&dmac0 12>, + <&dmac0 13>; + dma-names = "rx", "tx"; +}; diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index f8674bcc448..ec23b5c86fb 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -269,6 +269,7 @@ reg = <0xb00b0000 0x10000>; interrupts = <12>; clocks = <&clks 24>; + #dma-cells = <1>; }; dmac1: dma-controller@b0160000 { @@ -277,6 +278,7 @@ reg = <0xb0160000 0x10000>; interrupts = <13>; clocks = <&clks 25>; + #dma-cells = <1>; }; vip@b00C0000 { diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 0e219932d7c..3a15dee2e8a 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -286,6 +286,7 @@ reg = <0xb00b0000 0x10000>; interrupts = <12>; clocks = <&clks 24>; + #dma-cells = <1>; }; dmac1: dma-controller@b0160000 { @@ -294,6 +295,7 @@ reg = <0xb0160000 0x10000>; interrupts = <13>; clocks = <&clks 25>; + #dma-cells = <1>; }; vip@b00C0000 { diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index bcdacc73b6a..edc739f986a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -308,7 +308,7 @@ config DMA_OMAP config DMA_BCM2835 tristate "BCM2835 DMA engine support" - depends on (ARCH_BCM2835 || MACH_BCM2708) + depends on ARCH_BCM2835 select DMA_ENGINE select DMA_VIRTUAL_CHANNELS @@ -349,6 +349,16 @@ config MOXART_DMA select DMA_VIRTUAL_CHANNELS help Enable support for the MOXA ART SoC DMA controller. + +config FSL_EDMA + tristate "Freescale eDMA engine support" + depends on OF + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Support the Freescale eDMA engine with programmable channel + multiplexing capability for DMA request sources(slot). + This module can be found on Freescale Vybrid and LS-1 SoCs. config DMA_ENGINE bool diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c index 1e506afa33f..de361a156b3 100644 --- a/drivers/dma/acpi-dma.c +++ b/drivers/dma/acpi-dma.c @@ -13,6 +13,7 @@ */ #include <linux/device.h> +#include <linux/err.h> #include <linux/module.h> #include <linux/list.h> #include <linux/mutex.h> @@ -265,7 +266,7 @@ EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_register); */ void devm_acpi_dma_controller_free(struct device *dev) { - WARN_ON(devres_destroy(dev, devm_acpi_dma_release, NULL, NULL)); + WARN_ON(devres_release(dev, devm_acpi_dma_release, NULL, NULL)); } EXPORT_SYMBOL_GPL(devm_acpi_dma_controller_free); @@ -343,7 +344,7 @@ static int acpi_dma_parse_fixed_dma(struct acpi_resource *res, void *data) * @index: index of FixedDMA descriptor for @dev * * Return: - * Pointer to appropriate dma channel on success or NULL on error. + * Pointer to appropriate dma channel on success or an error pointer. */ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, size_t index) @@ -358,10 +359,10 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, /* Check if the device was enumerated by ACPI */ if (!dev || !ACPI_HANDLE(dev)) - return NULL; + return ERR_PTR(-ENODEV); if (acpi_bus_get_device(ACPI_HANDLE(dev), &adev)) - return NULL; + return ERR_PTR(-ENODEV); memset(&pdata, 0, sizeof(pdata)); pdata.index = index; @@ -376,7 +377,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, acpi_dev_free_resource_list(&resource_list); if (dma_spec->slave_id < 0 || dma_spec->chan_id < 0) - return NULL; + return ERR_PTR(-ENODEV); mutex_lock(&acpi_dma_lock); @@ -399,7 +400,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_index(struct device *dev, } mutex_unlock(&acpi_dma_lock); - return chan; + return chan ? chan : ERR_PTR(-EPROBE_DEFER); } EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_index); @@ -413,7 +414,7 @@ EXPORT_SYMBOL_GPL(acpi_dma_request_slave_chan_by_index); * the first FixedDMA descriptor is TX and second is RX. * * Return: - * Pointer to appropriate dma channel on success or NULL on error. + * Pointer to appropriate dma channel on success or an error pointer. */ struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev, const char *name) @@ -425,7 +426,7 @@ struct dma_chan *acpi_dma_request_slave_chan_by_name(struct device *dev, else if (!strcmp(name, "rx")) index = 1; else - return NULL; + return ERR_PTR(-ENODEV); return acpi_dma_request_slave_chan_by_index(dev, index); } diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index e2c04dc81e2..c13a3bb0f59 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1569,7 +1569,6 @@ static int at_dma_remove(struct platform_device *pdev) /* Disable interrupts */ atc_disable_chan_irq(atdma, chan->chan_id); - tasklet_disable(&atchan->tasklet); tasklet_kill(&atchan->tasklet); list_del(&chan->device_node); diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c index c18aebf7d5a..d028f36ae65 100644 --- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -620,12 +620,15 @@ static int cppi41_stop_chan(struct dma_chan *chan) u32 desc_phys; int ret; + desc_phys = lower_32_bits(c->desc_phys); + desc_num = (desc_phys - cdd->descs_phys) / sizeof(struct cppi41_desc); + if (!cdd->chan_busy[desc_num]) + return 0; + ret = cppi41_tear_down_chan(c); if (ret) return ret; - desc_phys = lower_32_bits(c->desc_phys); - desc_num = (desc_phys - cdd->descs_phys) / sizeof(struct cppi41_desc); WARN_ON(!cdd->chan_busy[desc_num]); cdd->chan_busy[desc_num] = NULL; diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index ed610b49751..a886713937f 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -627,18 +627,13 @@ EXPORT_SYMBOL_GPL(__dma_request_channel); struct dma_chan *dma_request_slave_channel_reason(struct device *dev, const char *name) { - struct dma_chan *chan; - /* If device-tree is present get slave info from here */ if (dev->of_node) return of_dma_request_slave_channel(dev->of_node, name); /* If device was enumerated by ACPI get slave info from here */ - if (ACPI_HANDLE(dev)) { - chan = acpi_dma_request_slave_chan_by_name(dev, name); - if (chan) - return chan; - } + if (ACPI_HANDLE(dev)) + return acpi_dma_request_slave_chan_by_name(dev, name); return ERR_PTR(-ENODEV); } diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 05b6dea770a..e27cec25c59 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -340,7 +340,7 @@ static unsigned int min_odd(unsigned int x, unsigned int y) static void result(const char *err, unsigned int n, unsigned int src_off, unsigned int dst_off, unsigned int len, unsigned long data) { - pr_info("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)", + pr_info("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)\n", current->comm, n, err, src_off, dst_off, len, data); } @@ -348,7 +348,7 @@ static void dbg_result(const char *err, unsigned int n, unsigned int src_off, unsigned int dst_off, unsigned int len, unsigned long data) { - pr_debug("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)", + pr_debug("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)\n", current->comm, n, err, src_off, dst_off, len, data); } diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 13ac3f240e7..cfdbb92aae1 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -33,8 +33,8 @@ * of which use ARM any more). See the "Databook" from Synopsys for * information beyond what licensees probably provide. * - * The driver has currently been tested only with the Atmel AT32AP7000, - * which does not support descriptor writeback. + * The driver has been tested with the Atmel AT32AP7000, which does not + * support descriptor writeback. */ static inline bool is_request_line_unset(struct dw_dma_chan *dwc) @@ -1479,7 +1479,6 @@ static void dw_dma_off(struct dw_dma *dw) int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) { struct dw_dma *dw; - size_t size; bool autocfg; unsigned int dw_params; unsigned int nr_channels; @@ -1487,6 +1486,13 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) int err; int i; + dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL); + if (!dw) + return -ENOMEM; + + dw->regs = chip->regs; + chip->dw = dw; + dw_params = dma_read_byaddr(chip->regs, DW_PARAMS); autocfg = dw_params >> DW_PARAMS_EN & 0x1; @@ -1509,9 +1515,9 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) else nr_channels = pdata->nr_channels; - size = sizeof(struct dw_dma) + nr_channels * sizeof(struct dw_dma_chan); - dw = devm_kzalloc(chip->dev, size, GFP_KERNEL); - if (!dw) + dw->chan = devm_kcalloc(chip->dev, nr_channels, sizeof(*dw->chan), + GFP_KERNEL); + if (!dw->chan) return -ENOMEM; dw->clk = devm_clk_get(chip->dev, "hclk"); @@ -1519,9 +1525,6 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata) return PTR_ERR(dw->clk); clk_prepare_enable(dw->clk); - dw->regs = chip->regs; - chip->dw = dw; - /* Get hardware configuration parameters */ if (autocfg) { max_blk_size = dma_readl(dw, MAX_BLK_SIZE); diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c index e89fc24b829..fec59f1a77b 100644 --- a/drivers/dma/dw/pci.c +++ b/drivers/dma/dw/pci.c @@ -75,6 +75,36 @@ static void dw_pci_remove(struct pci_dev *pdev) dev_warn(&pdev->dev, "can't remove device properly: %d\n", ret); } +#ifdef CONFIG_PM_SLEEP + +static int dw_pci_suspend_late(struct device *dev) +{ + struct pci_dev *pci = to_pci_dev(dev); + struct dw_dma_chip *chip = pci_get_drvdata(pci); + + return dw_dma_suspend(chip); +}; + +static int dw_pci_resume_early(struct device *dev) +{ + struct pci_dev *pci = to_pci_dev(dev); + struct dw_dma_chip *chip = pci_get_drvdata(pci); + + return dw_dma_resume(chip); +}; + +#else /* !CONFIG_PM_SLEEP */ + +#define dw_pci_suspend_late NULL +#define dw_pci_resume_early NULL + +#endif /* !CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops dw_pci_dev_pm_ops = { + .suspend_late = dw_pci_suspend_late, + .resume_early = dw_pci_resume_early, +}; + static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = { /* Medfield */ { PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata }, @@ -83,6 +113,9 @@ static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = { /* BayTrail */ { PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_pdata }, { PCI_VDEVICE(INTEL, 0x0f40), (kernel_ulong_t)&dw_pci_pdata }, + + /* Haswell */ + { PCI_VDEVICE(INTEL, 0x9c60), (kernel_ulong_t)&dw_pci_pdata }, { } }; MODULE_DEVICE_TABLE(pci, dw_pci_id_table); @@ -92,6 +125,9 @@ static struct pci_driver dw_pci_driver = { .id_table = dw_pci_id_table, .probe = dw_pci_probe, .remove = dw_pci_remove, + .driver = { + .pm = &dw_pci_dev_pm_ops, + }, }; module_pci_driver(dw_pci_driver); diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h index deb4274f80f..bb98d3e91e8 100644 --- a/drivers/dma/dw/regs.h +++ b/drivers/dma/dw/regs.h @@ -252,13 +252,13 @@ struct dw_dma { struct tasklet_struct tasklet; struct clk *clk; + /* channels */ + struct dw_dma_chan *chan; u8 all_chan_mask; /* hardware configuration */ unsigned char nr_masters; unsigned char data_width[4]; - - struct dw_dma_chan chan[0]; }; static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw) diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index cd8da451d19..cd04eb7b182 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -539,6 +539,7 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( edma_alloc_slot(EDMA_CTLR(echan->ch_num), EDMA_SLOT_ANY); if (echan->slot[i] < 0) { + kfree(edesc); dev_err(dev, "Failed to allocate slot\n"); return NULL; } @@ -553,8 +554,10 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic( ret = edma_config_pset(chan, &edesc->pset[i], src_addr, dst_addr, burst, dev_width, period_len, direction); - if (ret < 0) + if (ret < 0) { + kfree(edesc); return NULL; + } if (direction == DMA_DEV_TO_MEM) dst_addr += period_len; diff --git a/drivers/dma/fsl-edma.c b/drivers/dma/fsl-edma.c new file mode 100644 index 00000000000..381e793184b --- /dev/null +++ b/drivers/dma/fsl-edma.c @@ -0,0 +1,975 @@ +/* + * drivers/dma/fsl-edma.c + * + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * Driver for the Freescale eDMA engine with flexible channel multiplexing + * capability for DMA request sources. The eDMA block can be found on some + * Vybrid and Layerscape SoCs. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_dma.h> + +#include "virt-dma.h" + +#define EDMA_CR 0x00 +#define EDMA_ES 0x04 +#define EDMA_ERQ 0x0C +#define EDMA_EEI 0x14 +#define EDMA_SERQ 0x1B +#define EDMA_CERQ 0x1A +#define EDMA_SEEI 0x19 +#define EDMA_CEEI 0x18 +#define EDMA_CINT 0x1F +#define EDMA_CERR 0x1E +#define EDMA_SSRT 0x1D +#define EDMA_CDNE 0x1C +#define EDMA_INTR 0x24 +#define EDMA_ERR 0x2C + +#define EDMA_TCD_SADDR(x) (0x1000 + 32 * (x)) +#define EDMA_TCD_SOFF(x) (0x1004 + 32 * (x)) +#define EDMA_TCD_ATTR(x) (0x1006 + 32 * (x)) +#define EDMA_TCD_NBYTES(x) (0x1008 + 32 * (x)) +#define EDMA_TCD_SLAST(x) (0x100C + 32 * (x)) +#define EDMA_TCD_DADDR(x) (0x1010 + 32 * (x)) +#define EDMA_TCD_DOFF(x) (0x1014 + 32 * (x)) +#define EDMA_TCD_CITER_ELINK(x) (0x1016 + 32 * (x)) +#define EDMA_TCD_CITER(x) (0x1016 + 32 * (x)) +#define EDMA_TCD_DLAST_SGA(x) (0x1018 + 32 * (x)) +#define EDMA_TCD_CSR(x) (0x101C + 32 * (x)) +#define EDMA_TCD_BITER_ELINK(x) (0x101E + 32 * (x)) +#define EDMA_TCD_BITER(x) (0x101E + 32 * (x)) + +#define EDMA_CR_EDBG BIT(1) +#define EDMA_CR_ERCA BIT(2) +#define EDMA_CR_ERGA BIT(3) +#define EDMA_CR_HOE BIT(4) +#define EDMA_CR_HALT BIT(5) +#define EDMA_CR_CLM BIT(6) +#define EDMA_CR_EMLM BIT(7) +#define EDMA_CR_ECX BIT(16) +#define EDMA_CR_CX BIT(17) + +#define EDMA_SEEI_SEEI(x) ((x) & 0x1F) +#define EDMA_CEEI_CEEI(x) ((x) & 0x1F) +#define EDMA_CINT_CINT(x) ((x) & 0x1F) +#define EDMA_CERR_CERR(x) ((x) & 0x1F) + +#define EDMA_TCD_ATTR_DSIZE(x) (((x) & 0x0007)) +#define EDMA_TCD_ATTR_DMOD(x) (((x) & 0x001F) << 3) +#define EDMA_TCD_ATTR_SSIZE(x) (((x) & 0x0007) << 8) +#define EDMA_TCD_ATTR_SMOD(x) (((x) & 0x001F) << 11) +#define EDMA_TCD_ATTR_SSIZE_8BIT (0x0000) +#define EDMA_TCD_ATTR_SSIZE_16BIT (0x0100) +#define EDMA_TCD_ATTR_SSIZE_32BIT (0x0200) +#define EDMA_TCD_ATTR_SSIZE_64BIT (0x0300) +#define EDMA_TCD_ATTR_SSIZE_32BYTE (0x0500) +#define EDMA_TCD_ATTR_DSIZE_8BIT (0x0000) +#define EDMA_TCD_ATTR_DSIZE_16BIT (0x0001) +#define EDMA_TCD_ATTR_DSIZE_32BIT (0x0002) +#define EDMA_TCD_ATTR_DSIZE_64BIT (0x0003) +#define EDMA_TCD_ATTR_DSIZE_32BYTE (0x0005) + +#define EDMA_TCD_SOFF_SOFF(x) (x) +#define EDMA_TCD_NBYTES_NBYTES(x) (x) +#define EDMA_TCD_SLAST_SLAST(x) (x) +#define EDMA_TCD_DADDR_DADDR(x) (x) +#define EDMA_TCD_CITER_CITER(x) ((x) & 0x7FFF) +#define EDMA_TCD_DOFF_DOFF(x) (x) +#define EDMA_TCD_DLAST_SGA_DLAST_SGA(x) (x) +#define EDMA_TCD_BITER_BITER(x) ((x) & 0x7FFF) + +#define EDMA_TCD_CSR_START BIT(0) +#define EDMA_TCD_CSR_INT_MAJOR BIT(1) +#define EDMA_TCD_CSR_INT_HALF BIT(2) +#define EDMA_TCD_CSR_D_REQ BIT(3) +#define EDMA_TCD_CSR_E_SG BIT(4) +#define EDMA_TCD_CSR_E_LINK BIT(5) +#define EDMA_TCD_CSR_ACTIVE BIT(6) +#define EDMA_TCD_CSR_DONE BIT(7) + +#define EDMAMUX_CHCFG_DIS 0x0 +#define EDMAMUX_CHCFG_ENBL 0x80 +#define EDMAMUX_CHCFG_SOURCE(n) ((n) & 0x3F) + +#define DMAMUX_NR 2 + +#define FSL_EDMA_BUSWIDTHS BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \ + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \ + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \ + BIT(DMA_SLAVE_BUSWIDTH_8_BYTES) + +struct fsl_edma_hw_tcd { + u32 saddr; + u16 soff; + u16 attr; + u32 nbytes; + u32 slast; + u32 daddr; + u16 doff; + u16 citer; + u32 dlast_sga; + u16 csr; + u16 biter; +}; + +struct fsl_edma_sw_tcd { + dma_addr_t ptcd; + struct fsl_edma_hw_tcd *vtcd; +}; + +struct fsl_edma_slave_config { + enum dma_transfer_direction dir; + enum dma_slave_buswidth addr_width; + u32 dev_addr; + u32 burst; + u32 attr; +}; + +struct fsl_edma_chan { + struct virt_dma_chan vchan; + enum dma_status status; + struct fsl_edma_engine *edma; + struct fsl_edma_desc *edesc; + struct fsl_edma_slave_config fsc; + struct dma_pool *tcd_pool; +}; + +struct fsl_edma_desc { + struct virt_dma_desc vdesc; + struct fsl_edma_chan *echan; + bool iscyclic; + unsigned int n_tcds; + struct fsl_edma_sw_tcd tcd[]; +}; + +struct fsl_edma_engine { + struct dma_device dma_dev; + void __iomem *membase; + void __iomem *muxbase[DMAMUX_NR]; + struct clk *muxclk[DMAMUX_NR]; + struct mutex fsl_edma_mutex; + u32 n_chans; + int txirq; + int errirq; + bool big_endian; + struct fsl_edma_chan chans[]; +}; + +/* + * R/W functions for big- or little-endian registers + * the eDMA controller's endian is independent of the CPU core's endian. + */ + +static u16 edma_readw(struct fsl_edma_engine *edma, void __iomem *addr) +{ + if (edma->big_endian) + return ioread16be(addr); + else + return ioread16(addr); +} + +static u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr) +{ + if (edma->big_endian) + return ioread32be(addr); + else + return ioread32(addr); +} + +static void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr) +{ + iowrite8(val, addr); +} + +static void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr) +{ + if (edma->big_endian) + iowrite16be(val, addr); + else + iowrite16(val, addr); +} + +static void edma_writel(struct fsl_edma_engine *edma, u32 val, void __iomem *addr) +{ + if (edma->big_endian) + iowrite32be(val, addr); + else + iowrite32(val, addr); +} + +static struct fsl_edma_chan *to_fsl_edma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct fsl_edma_chan, vchan.chan); +} + +static struct fsl_edma_desc *to_fsl_edma_desc(struct virt_dma_desc *vd) +{ + return container_of(vd, struct fsl_edma_desc, vdesc); +} + +static void fsl_edma_enable_request(struct fsl_edma_chan *fsl_chan) +{ + void __iomem *addr = fsl_chan->edma->membase; + u32 ch = fsl_chan->vchan.chan.chan_id; + + edma_writeb(fsl_chan->edma, EDMA_SEEI_SEEI(ch), addr + EDMA_SEEI); + edma_writeb(fsl_chan->edma, ch, addr + EDMA_SERQ); +} + +static void fsl_edma_disable_request(struct fsl_edma_chan *fsl_chan) +{ + void __iomem *addr = fsl_chan->edma->membase; + u32 ch = fsl_chan->vchan.chan.chan_id; + + edma_writeb(fsl_chan->edma, ch, addr + EDMA_CERQ); + edma_writeb(fsl_chan->edma, EDMA_CEEI_CEEI(ch), addr + EDMA_CEEI); +} + +static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan, + unsigned int slot, bool enable) +{ + u32 ch = fsl_chan->vchan.chan.chan_id; + void __iomem *muxaddr = fsl_chan->edma->muxbase[ch / DMAMUX_NR]; + unsigned chans_per_mux, ch_off; + + chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR; + ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux; + + if (enable) + edma_writeb(fsl_chan->edma, + EDMAMUX_CHCFG_ENBL | EDMAMUX_CHCFG_SOURCE(slot), + muxaddr + ch_off); + else + edma_writeb(fsl_chan->edma, EDMAMUX_CHCFG_DIS, muxaddr + ch_off); +} + +static unsigned int fsl_edma_get_tcd_attr(enum dma_slave_buswidth addr_width) +{ + switch (addr_width) { + case 1: + return EDMA_TCD_ATTR_SSIZE_8BIT | EDMA_TCD_ATTR_DSIZE_8BIT; + case 2: + return EDMA_TCD_ATTR_SSIZE_16BIT | EDMA_TCD_ATTR_DSIZE_16BIT; + case 4: + return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT; + case 8: + return EDMA_TCD_ATTR_SSIZE_64BIT | EDMA_TCD_ATTR_DSIZE_64BIT; + default: + return EDMA_TCD_ATTR_SSIZE_32BIT | EDMA_TCD_ATTR_DSIZE_32BIT; + } +} + +static void fsl_edma_free_desc(struct virt_dma_desc *vdesc) +{ + struct fsl_edma_desc *fsl_desc; + int i; + + fsl_desc = to_fsl_edma_desc(vdesc); + for (i = 0; i < fsl_desc->n_tcds; i++) + dma_pool_free(fsl_desc->echan->tcd_pool, |