diff options
31 files changed, 0 insertions, 19847 deletions
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index ea5efb426f7..22365f140be 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -40,8 +40,6 @@ source "drivers/staging/olpc_dcon/Kconfig" source "drivers/staging/panel/Kconfig" -source "drivers/staging/rtl8187se/Kconfig" - source "drivers/staging/rtl8192u/Kconfig" source "drivers/staging/rtl8192e/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 86e020c2ad0..fbe84ed2d04 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_COMEDI) += comedi/ obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/ obj-$(CONFIG_PANEL) += panel/ -obj-$(CONFIG_R8187SE) += rtl8187se/ obj-$(CONFIG_RTL8192U) += rtl8192u/ obj-$(CONFIG_RTL8192E) += rtl8192e/ obj-$(CONFIG_R8712U) += rtl8712/ diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig deleted file mode 100644 index ff8d41ebca3..00000000000 --- a/drivers/staging/rtl8187se/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config R8187SE - tristate "RealTek RTL8187SE Wireless LAN NIC driver" - depends on PCI && WLAN - depends on m - select WIRELESS_EXT - select WEXT_PRIV - select EEPROM_93CX6 - select CRYPTO - ---help--- - If built as a module, it will be called r8187se.ko. diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile deleted file mode 100644 index 91d1aa2830c..00000000000 --- a/drivers/staging/rtl8187se/Makefile +++ /dev/null @@ -1,38 +0,0 @@ - -#ccflags-y += -DCONFIG_IEEE80211_NOWEP=y -#ccflags-y += -std=gnu89 -#ccflags-y += -O2 -#CC = gcc - -ccflags-y := -DSW_ANTE -ccflags-y += -DTX_TRACK -ccflags-y += -DHIGH_POWER -ccflags-y += -DSW_DIG -ccflags-y += -DRATE_ADAPT - -#enable it for legacy power save, disable it for leisure power save -ccflags-y += -DENABLE_LPS - - -#ccflags-y := -mhard-float -DCONFIG_FORCE_HARD_FLOAT=y - -r8187se-y := \ - r8180_core.o \ - r8180_wx.o \ - r8180_rtl8225z2.o \ - r8185b_init.o \ - r8180_dm.o \ - ieee80211/dot11d.o \ - ieee80211/ieee80211_softmac.o \ - ieee80211/ieee80211_rx.o \ - ieee80211/ieee80211_tx.o \ - ieee80211/ieee80211_wx.o \ - ieee80211/ieee80211_module.o \ - ieee80211/ieee80211_softmac_wx.o \ - ieee80211/ieee80211_crypt.o \ - ieee80211/ieee80211_crypt_tkip.o \ - ieee80211/ieee80211_crypt_ccmp.o \ - ieee80211/ieee80211_crypt_wep.o - -obj-$(CONFIG_R8187SE) += r8187se.o - diff --git a/drivers/staging/rtl8187se/Module.symvers b/drivers/staging/rtl8187se/Module.symvers deleted file mode 100644 index e69de29bb2d..00000000000 --- a/drivers/staging/rtl8187se/Module.symvers +++ /dev/null diff --git a/drivers/staging/rtl8187se/TODO b/drivers/staging/rtl8187se/TODO deleted file mode 100644 index 704949a9da0..00000000000 --- a/drivers/staging/rtl8187se/TODO +++ /dev/null @@ -1,13 +0,0 @@ -TODO: -- prepare private ieee80211 stack for merge with rtl8192su's version: - - add hwsec_active flag to struct ieee80211_device - - add bHwSec flag to cb_desc structure -- switch to use shared "librtl" instead of private ieee80211 stack -- switch to use LIB80211 -- switch to use MAC80211 -- use kernel coding style -- checkpatch.pl fixes -- sparse fixes -- integrate with drivers/net/wireless/rtl818x - -Please send any patches to Greg Kroah-Hartman <greg@kroah.com>. diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c deleted file mode 100644 index 4483c2c0307..00000000000 --- a/drivers/staging/rtl8187se/ieee80211/dot11d.c +++ /dev/null @@ -1,189 +0,0 @@ -#include "dot11d.h" - -void Dot11d_Init(struct ieee80211_device *ieee) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee); - - pDot11dInfo->bEnabled = 0; - - pDot11dInfo->State = DOT11D_STATE_NONE; - pDot11dInfo->CountryIeLen = 0; - memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); - memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); - RESET_CIE_WATCHDOG(ieee); - - netdev_info(ieee->dev, "Dot11d_Init()\n"); -} - -/* Reset to the state as we are just entering a regulatory domain. */ -void Dot11d_Reset(struct ieee80211_device *ieee) -{ - u32 i; - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(ieee); - - /* Clear old channel map */ - memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); - memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); - /* Set new channel map */ - for (i = 1; i <= 11; i++) - (pDot11dInfo->channel_map)[i] = 1; - - for (i = 12; i <= 14; i++) - (pDot11dInfo->channel_map)[i] = 2; - - pDot11dInfo->State = DOT11D_STATE_NONE; - pDot11dInfo->CountryIeLen = 0; - RESET_CIE_WATCHDOG(ieee); -} - -/* - * Description: - * Update country IE from Beacon or Probe Response and configure PHY for - * operation in the regulatory domain. - * - * TODO: - * Configure Tx power. - * - * Assumption: - * 1. IS_DOT11D_ENABLE() is TRUE. - * 2. Input IE is an valid one. - */ -void Dot11d_UpdateCountryIe(struct ieee80211_device *dev, u8 *pTaddr, - u16 CoutryIeLen, u8 *pCoutryIe) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - u8 i, j, NumTriples, MaxChnlNum; - u8 index, MaxTxPowerInDbm; - PCHNL_TXPOWER_TRIPLE pTriple; - - if ((CoutryIeLen - 3)%3 != 0) { - netdev_info(dev->dev, "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n"); - Dot11d_Reset(dev); - return; - } - - memset(pDot11dInfo->channel_map, 0, MAX_CHANNEL_NUMBER+1); - memset(pDot11dInfo->MaxTxPwrDbmList, 0xFF, MAX_CHANNEL_NUMBER+1); - MaxChnlNum = 0; - NumTriples = (CoutryIeLen - 3) / 3; /* skip 3-byte country string. */ - pTriple = (PCHNL_TXPOWER_TRIPLE)(pCoutryIe + 3); - for (i = 0; i < NumTriples; i++) { - if (MaxChnlNum >= pTriple->FirstChnl) { - /* - * It is not in a monotonically increasing order, - * so stop processing. - */ - netdev_info(dev->dev, - "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........1\n"); - Dot11d_Reset(dev); - return; - } - if (MAX_CHANNEL_NUMBER < - (pTriple->FirstChnl + pTriple->NumChnls)) { - /* - * It is not a valid set of channel id, - * so stop processing - */ - netdev_info(dev->dev, - "Dot11d_UpdateCountryIe(): Invalid country IE, skip it........2\n"); - Dot11d_Reset(dev); - return; - } - - for (j = 0; j < pTriple->NumChnls; j++) { - index = pTriple->FirstChnl + j; - pDot11dInfo->channel_map[index] = 1; - MaxTxPowerInDbm = pTriple->MaxTxPowerInDbm; - pDot11dInfo->MaxTxPwrDbmList[index] = MaxTxPowerInDbm; - MaxChnlNum = pTriple->FirstChnl + j; - } - - pTriple = (PCHNL_TXPOWER_TRIPLE)((u8 *)pTriple + 3); - } -#if 1 - netdev_info(dev->dev, "Channel List:"); - for (i = 1; i <= MAX_CHANNEL_NUMBER; i++) - if (pDot11dInfo->channel_map[i] > 0) - netdev_info(dev->dev, " %d", i); - netdev_info(dev->dev, "\n"); -#endif - - UPDATE_CIE_SRC(dev, pTaddr); - - pDot11dInfo->CountryIeLen = CoutryIeLen; - memcpy(pDot11dInfo->CountryIeBuf, pCoutryIe, CoutryIeLen); - pDot11dInfo->State = DOT11D_STATE_LEARNED; -} - -u8 DOT11D_GetMaxTxPwrInDbm(struct ieee80211_device *dev, u8 Channel) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - u8 MaxTxPwrInDbm = 255; - - if (MAX_CHANNEL_NUMBER < Channel) { - netdev_info(dev->dev, "DOT11D_GetMaxTxPwrInDbm(): Invalid Channel\n"); - return MaxTxPwrInDbm; - } - if (pDot11dInfo->channel_map[Channel]) - MaxTxPwrInDbm = pDot11dInfo->MaxTxPwrDbmList[Channel]; - - return MaxTxPwrInDbm; -} - - -void DOT11D_ScanComplete(struct ieee80211_device *dev) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - - switch (pDot11dInfo->State) { - case DOT11D_STATE_LEARNED: - pDot11dInfo->State = DOT11D_STATE_DONE; - break; - - case DOT11D_STATE_DONE: - if (GET_CIE_WATCHDOG(dev) == 0) { - /* Reset country IE if previous one is gone. */ - Dot11d_Reset(dev); - } - break; - case DOT11D_STATE_NONE: - break; - } -} - -int IsLegalChannel(struct ieee80211_device *dev, u8 channel) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - - if (MAX_CHANNEL_NUMBER < channel) { - netdev_info(dev->dev, "IsLegalChannel(): Invalid Channel\n"); - return 0; - } - if (pDot11dInfo->channel_map[channel] > 0) - return 1; - return 0; -} - -int ToLegalChannel(struct ieee80211_device *dev, u8 channel) -{ - PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev); - u8 default_chn = 0; - u32 i = 0; - - for (i = 1; i <= MAX_CHANNEL_NUMBER; i++) { - if (pDot11dInfo->channel_map[i] > 0) { - default_chn = i; - break; - } - } - - if (MAX_CHANNEL_NUMBER < channel) { - netdev_info(dev->dev, "IsLegalChannel(): Invalid Channel\n"); - return default_chn; - } - - if (pDot11dInfo->channel_map[channel] > 0) - return channel; - - return default_chn; -} diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.h b/drivers/staging/rtl8187se/ieee80211/dot11d.h deleted file mode 100644 index f996691307b..00000000000 --- a/drivers/staging/rtl8187se/ieee80211/dot11d.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __INC_DOT11D_H -#define __INC_DOT11D_H - -#include "ieee80211.h" - -/* #define ENABLE_DOT11D */ - -/* #define DOT11D_MAX_CHNL_NUM 83 */ - -typedef struct _CHNL_TXPOWER_TRIPLE { - u8 FirstChnl; - u8 NumChnls; - u8 MaxTxPowerInDbm; -} CHNL_TXPOWER_TRIPLE, *PCHNL_TXPOWER_TRIPLE; - -typedef enum _DOT11D_STATE { - DOT11D_STATE_NONE = 0, - DOT11D_STATE_LEARNED, - DOT11D_STATE_DONE, -} DOT11D_STATE; - -typedef struct _RT_DOT11D_INFO { - /* DECLARE_RT_OBJECT(RT_DOT12D_INFO); */ - - bool bEnabled; /* dot11MultiDomainCapabilityEnabled */ - - u16 CountryIeLen; /* > 0 if CountryIeBuf[] contains valid country information element. */ - u8 CountryIeBuf[MAX_IE_LEN]; - u8 CountryIeSrcAddr[6]; /* Source AP of the country IE. */ - u8 CountryIeWatchdog; - - u8 channel_map[MAX_CHANNEL_NUMBER+1]; /* !!!Value 0: Invalid, 1: Valid (active scan), 2: Valid (passive scan) */ - /* u8 ChnlListLen; // #Bytes valid in ChnlList[]. */ - /* u8 ChnlList[DOT11D_MAX_CHNL_NUM]; */ - u8 MaxTxPwrDbmList[MAX_CHANNEL_NUMBER+1]; - - DOT11D_STATE State; -} RT_DOT11D_INFO, *PRT_DOT11D_INFO; - -#define eqMacAddr(a, b) (((a)[0] == (b)[0] && (a)[1] == (b)[1] && (a)[2] == (b)[2] && (a)[3] == (b)[3] && (a)[4] == (b)[4] && (a)[5] == (b)[5]) ? 1:0) -#define cpMacAddr(des, src) ((des)[0] = (src)[0], (des)[1] = (src)[1], (des)[2] = (src)[2], (des)[3] = (src)[3], (des)[4] = (src)[4], (des)[5] = (src)[5]) -#define GET_DOT11D_INFO(__pIeeeDev) ((PRT_DOT11D_INFO)((__pIeeeDev)->pDot11dInfo)) - -#define IS_DOT11D_ENABLE(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->bEnabled -#define IS_COUNTRY_IE_VALID(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen > 0) - -#define IS_EQUAL_CIE_SRC(__pIeeeDev, __pTa) eqMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) -#define UPDATE_CIE_SRC(__pIeeeDev, __pTa) cpMacAddr(GET_DOT11D_INFO(__pIeeeDev)->CountryIeSrcAddr, __pTa) - -#define IS_COUNTRY_IE_CHANGED(__pIeeeDev, __Ie) \ - (((__Ie).Length == 0 || (__Ie).Length != GET_DOT11D_INFO(__pIeeeDev)->CountryIeLen) ? \ - FALSE : \ - (!memcmp(GET_DOT11D_INFO(__pIeeeDev)->CountryIeBuf, (__Ie).Octet, (__Ie).Length))) - -#define CIE_WATCHDOG_TH 1 -#define GET_CIE_WATCHDOG(__pIeeeDev) GET_DOT11D_INFO(__pIeeeDev)->CountryIeWatchdog -#define RESET_CIE_WATCHDOG(__pIeeeDev) GET_CIE_WATCHDOG(__pIeeeDev) = 0 -#define UPDATE_CIE_WATCHDOG(__pIeeeDev) ++GET_CIE_WATCHDOG(__pIeeeDev) - -#define IS_DOT11D_STATE_DONE(__pIeeeDev) (GET_DOT11D_INFO(__pIeeeDev)->State == DOT11D_STATE_DONE) - -void Dot11d_Init(struct ieee80211_device *dev); -void Dot11d_Reset(struct ieee80211_device *dev); -void Dot11d_UpdateCountryIe(struct ieee80211_device *dev, u8 *pTaddr, - u16 CoutryIeLen, u8 *pCoutryIe); -u8 DOT11D_GetMaxTxPwrInDbm(struct ieee80211_device *dev, u8 Channel); -void DOT11D_ScanComplete(struct ieee80211_device *dev); -int IsLegalChannel(struct ieee80211_device *dev, u8 channel); -int ToLegalChannel(struct ieee80211_device *dev, u8 channel); - -#endif /* #ifndef __INC_DOT11D_H */ diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h deleted file mode 100644 index d1763b7b8f2..00000000000 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h +++ /dev/null @@ -1,1496 +0,0 @@ -/* - * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11 - * remains copyright by the original authors - * - * Portions of the merged code are based on Host AP (software wireless - * LAN access point) driver for Intersil Prism2/2.5/3. - * - * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen - * <jkmaline@cc.hut.fi> - * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> - * - * Adaption to a generic IEEE 802.11 stack by James Ketrenos - * <jketreno@linux.intel.com> - * Copyright (c) 2004, Intel Corporation - * - * Modified for Realtek's wi-fi cards by Andrea Merello - * <andrea.merello@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. See README and COPYING for - * more details. - */ -#ifndef IEEE80211_H -#define IEEE80211_H -#include <linux/if_ether.h> /* ETH_ALEN */ -#include <linux/kernel.h> /* ARRAY_SIZE */ -#include <linux/jiffies.h> -#include <linux/timer.h> -#include <linux/sched.h> -#include <linux/semaphore.h> -#include <linux/wireless.h> -#include <linux/ieee80211.h> -#include <linux/interrupt.h> - -#define KEY_TYPE_NA 0x0 -#define KEY_TYPE_WEP40 0x1 -#define KEY_TYPE_TKIP 0x2 -#define KEY_TYPE_CCMP 0x4 -#define KEY_TYPE_WEP104 0x5 - -#define aSifsTime 10 - -#define MGMT_QUEUE_NUM 5 - - -#define IEEE_CMD_SET_WPA_PARAM 1 -#define IEEE_CMD_SET_WPA_IE 2 -#define IEEE_CMD_SET_ENCRYPTION 3 -#define IEEE_CMD_MLME 4 - -#define IEEE_PARAM_WPA_ENABLED 1 -#define IEEE_PARAM_TKIP_COUNTERMEASURES 2 -#define IEEE_PARAM_DROP_UNENCRYPTED 3 -#define IEEE_PARAM_PRIVACY_INVOKED 4 -#define IEEE_PARAM_AUTH_ALGS 5 -#define IEEE_PARAM_IEEE_802_1X 6 -//It should consistent with the driver_XXX.c -// David, 2006.9.26 -#define IEEE_PARAM_WPAX_SELECT 7 -//Added for notify the encryption type selection -// David, 2006.9.26 -#define IEEE_PROTO_WPA 1 -#define IEEE_PROTO_RSN 2 -//Added for notify the encryption type selection -// David, 2006.9.26 -#define IEEE_WPAX_USEGROUP 0 -#define IEEE_WPAX_WEP40 1 -#define IEEE_WPAX_TKIP 2 -#define IEEE_WPAX_WRAP 3 -#define IEEE_WPAX_CCMP 4 -#define IEEE_WPAX_WEP104 5 - -#define IEEE_KEY_MGMT_IEEE8021X 1 -#define IEEE_KEY_MGMT_PSK 2 - - - -#define IEEE_MLME_STA_DEAUTH 1 -#define IEEE_MLME_STA_DISASSOC 2 - - -#define IEEE_CRYPT_ERR_UNKNOWN_ALG 2 -#define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3 -#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4 -#define IEEE_CRYPT_ERR_KEY_SET_FAILED 5 -#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6 -#define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7 - - -#define IEEE_CRYPT_ALG_NAME_LEN 16 - -extern int ieee80211_crypto_tkip_init(void); -extern void ieee80211_crypto_tkip_exit(void); - -//by amy for ps -typedef struct ieee_param { - u32 cmd; - u8 sta_addr[ETH_ALEN]; - union { - struct { - u8 name; - u32 value; - } wpa_param; - struct { - u32 len; - u8 reserved[32]; - u8 data[0]; - } wpa_ie; - struct{ - int command; - int reason_code; - } mlme; - struct { - u8 alg[IEEE_CRYPT_ALG_NAME_LEN]; - u8 set_tx; - u32 err; - u8 idx; - u8 seq[8]; /* sequence counter (set: RX, get: TX) */ - u16 key_len; - u8 key[0]; - } crypt; - - } u; -}ieee_param; - - -#define MSECS(t) msecs_to_jiffies(t) -#define msleep_interruptible_rtl msleep_interruptible - -#define IEEE80211_DATA_LEN 2304 -/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section - 6.2.1.1.2. - - The figure in section 7.1.2 suggests a body size of up to 2312 - bytes is allowed, which is a bit confusing, I suspect this - represents the 2304 bytes of real data, plus a possible 8 bytes of - WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */ - -#define IEEE80211_3ADDR_LEN 24 -#define IEEE80211_4ADDR_LEN 30 -#define IEEE80211_FCS_LEN 4 -#define IEEE80211_HLEN IEEE80211_4ADDR_LEN -#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN) -#define IEEE80211_MGMT_HDR_LEN 24 -#define IEEE80211_DATA_HDR3_LEN 24 -#define IEEE80211_DATA_HDR4_LEN 30 - -#define MIN_FRAG_THRESHOLD 256U -#define MAX_FRAG_THRESHOLD 2346U - -/* Frame control field constants */ -#define IEEE80211_FCTL_DSTODS 0x0300 //added by david -#define IEEE80211_FCTL_WEP 0x4000 - -/* debug macros */ - -#ifdef CONFIG_IEEE80211_DEBUG -extern u32 ieee80211_debug_level; -#define IEEE80211_DEBUG(level, fmt, args...) \ -do { if (ieee80211_debug_level & (level)) \ - printk(KERN_DEBUG "ieee80211: %c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) -#else -#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0) -#endif /* CONFIG_IEEE80211_DEBUG */ - -/* - * To use the debug system; - * - * If you are defining a new debug classification, simply add it to the #define - * list here in the form of: - * - * #define IEEE80211_DL_xxxx VALUE - * - * shifting value to the left one bit from the previous entry. xxxx should be - * the name of the classification (for example, WEP) - * - * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your - * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want - * to send output to that classification. - * - * To add your debug level to the list of levels seen when you perform - * - * % cat /proc/net/ipw/debug_level - * - * you simply need to add your entry to the ipw_debug_levels array. - * - * If you do not see debug_level in /proc/net/ipw then you do not have - * CONFIG_IEEE80211_DEBUG defined in your kernel configuration - * - */ - -#define IEEE80211_DL_INFO (1<<0) -#define IEEE80211_DL_WX (1<<1) -#define IEEE80211_DL_SCAN (1<<2) -#define IEEE80211_DL_STATE (1<<3) -#define IEEE80211_DL_MGMT (1<<4) -#define IEEE80211_DL_FRAG (1<<5) -#define IEEE80211_DL_EAP (1<<6) -#define IEEE80211_DL_DROP (1<<7) - -#define IEEE80211_DL_TX (1<<8) -#define IEEE80211_DL_RX (1<<9) - -#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a) -#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a) -#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a) - -#define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a) -#define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a) -//#define IEEE_DEBUG_SCAN IEEE80211_WARNING -#define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a) -#define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a) -#define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a) -#define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a) -#define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a) -#define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a) -#define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a) -#include <linux/netdevice.h> -#include <linux/if_arp.h> /* ARPHRD_ETHER */ - -#ifndef WIRELESS_SPY -#define WIRELESS_SPY // enable iwspy support -#endif -#include <net/iw_handler.h> // new driver API - -#ifndef ETH_P_PAE -#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ -#endif /* ETH_P_PAE */ - -#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */ - -#ifndef ETH_P_80211_RAW -#define ETH_P_80211_RAW (ETH_P_ECONET + 1) -#endif - -/* IEEE 802.11 defines */ - -#define P80211_OUI_LEN 3 - -struct ieee80211_snap_hdr { - - u8 dsap; /* always 0xAA */ - u8 ssap; /* always 0xAA */ - u8 ctrl; /* always 0x03 */ - u8 oui[P80211_OUI_LEN]; /* organizational universal id */ - -} __attribute__ ((packed)); - -#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr) - -#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE) -#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE) - -#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG) -#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ) - -#define WLAN_CAPABILITY_BSS (1<<0) -#define WLAN_CAPABILITY_SHORT_SLOT (1<<10) - -#define IEEE80211_STATMASK_SIGNAL (1<<0) -#define IEEE80211_STATMASK_RSSI (1<<1) -#define IEEE80211_STATMASK_NOISE (1<<2) -#define IEEE80211_STATMASK_RATE (1<<3) -#define IEEE80211_STATMASK_WEMASK 0x7 - - -#define IEEE80211_CCK_MODULATION (1<<0) -#define IEEE80211_OFDM_MODULATION (1<<1) - -#define IEEE80211_24GHZ_BAND (1<<0) -#define IEEE80211_52GHZ_BAND (1<<1) - -#define IEEE80211_CCK_RATE_LEN 4 -#define IEEE80211_CCK_RATE_1MB 0x02 -#define IEEE80211_CCK_RATE_2MB 0x04 -#define IEEE80211_CCK_RATE_5MB 0x0B -#define IEEE80211_CCK_RATE_11MB 0x16 -#define IEEE80211_OFDM_RATE_LEN 8 -#define IEEE80211_OFDM_RATE_6MB 0x0C -#define IEEE80211_OFDM_RATE_9MB 0x12 -#define IEEE80211_OFDM_RATE_12MB 0x18 -#define IEEE80211_OFDM_RATE_18MB 0x24 -#define IEEE80211_OFDM_RATE_24MB 0x30 -#define IEEE80211_OFDM_RATE_36MB 0x48 -#define IEEE80211_OFDM_RATE_48MB 0x60 -#define IEEE80211_OFDM_RATE_54MB 0x6C -#define IEEE80211_BASIC_RATE_MASK 0x80 - -#define IEEE80211_CCK_RATE_1MB_MASK (1<<0) -#define IEEE80211_CCK_RATE_2MB_MASK (1<<1) -#define IEEE80211_CCK_RATE_5MB_MASK (1<<2) -#define IEEE80211_CCK_RATE_11MB_MASK (1<<3) -#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4) -#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5) -#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6) -#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7) -#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8) -#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9) -#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10) -#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11) - -#define IEEE80211_CCK_RATES_MASK 0x0000000F -#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \ - IEEE80211_CCK_RATE_2MB_MASK) -#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \ - IEEE80211_CCK_RATE_5MB_MASK | \ - IEEE80211_CCK_RATE_11MB_MASK) - -#define IEEE80211_OFDM_RATES_MASK 0x00000FF0 -#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \ - IEEE80211_OFDM_RATE_12MB_MASK | \ - IEEE80211_OFDM_RATE_24MB_MASK) -#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \ - IEEE80211_OFDM_RATE_9MB_MASK | \ - IEEE80211_OFDM_RATE_18MB_MASK | \ - IEEE80211_OFDM_RATE_36MB_MASK | \ - IEEE80211_OFDM_RATE_48MB_MASK | \ - IEEE80211_OFDM_RATE_54MB_MASK) -#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \ - IEEE80211_CCK_DEFAULT_RATES_MASK) - -#define IEEE80211_NUM_OFDM_RATES 8 -#define IEEE80211_NUM_CCK_RATES 4 -#define IEEE80211_OFDM_SHIFT_MASK_A 4 - -/* this is stolen and modified from the madwifi driver*/ -#define IEEE80211_FC0_TYPE_MASK 0x0c -#define IEEE80211_FC0_TYPE_DATA 0x08 -#define IEEE80211_FC0_SUBTYPE_MASK 0xB0 -#define IEEE80211_FC0_SUBTYPE_QOS 0x80 - -#define IEEE80211_QOS_HAS_SEQ(fc) \ - (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \ - (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS)) - -/* this is stolen from ipw2200 driver */ -#define IEEE_IBSS_MAC_HASH_SIZE 31 -struct ieee_ibss_seq { - u8 mac[ETH_ALEN]; - u16 seq_num[17]; - u16 frag_num[17]; - unsigned long packet_time[17]; - struct list_head list; -}; - -/* NOTE: This data is for statistical purposes; not all hardware provides this - * information for frames received. Not setting these will not cause - * any adverse affects. */ -struct ieee80211_rx_stats { - u32 mac_time[2]; - u8 signalstrength; - s8 rssi; - u8 signal; - u8 noise; - u16 rate; /* in 100 kbps */ - u8 received_channel; - u8 control; - u8 mask; - u8 freq; - u16 len; - u8 nic_type; -}; - -/* IEEE 802.11 requires that STA supports concurrent reception of at least - * three fragmented frames. This define can be increased to support more - * concurrent frames, but it should be noted that each entry can consume about - * 2 kB of RAM and increasing cache size will slow down frame reassembly. */ -#define IEEE80211_FRAG_CACHE_LEN 4 - -struct ieee80211_frag_entry { - unsigned long first_frag_time; - unsigned int seq; - unsigned int last_frag; - struct sk_buff *skb; - u8 src_addr[ETH_ALEN]; - u8 dst_addr[ETH_ALEN]; -}; - -struct ieee80211_stats { - unsigned int tx_unicast_frames; - unsigned int tx_multicast_frames; - unsigned int tx_fragments; - unsigned int tx_unicast_octets; - unsigned int tx_multicast_octets; - unsigned int tx_deferred_transmissions; - unsigned int tx_single_retry_frames; - unsigned int tx_multiple_retry_frames; - unsigned int tx_retry_limit_exceeded; - unsigned int tx_discards; - unsigned int rx_unicast_frames; - unsigned int rx_multicast_frames; - unsigned int rx_fragments; - unsigned int rx_unicast_octets; - unsigned int rx_multicast_octets; - unsigned int rx_fcs_errors; - unsigned int rx_discards_no_buffer; - unsigned int tx_discards_wrong_sa; - unsigned int rx_discards_undecryptable; - unsigned int rx_message_in_msg_fragments; - unsigned int rx_message_in_bad_msg_fragments; -}; - -struct ieee80211_device; - -#include "ieee80211_crypt.h" - -#define SEC_KEY_1 (1<<0) -#define SEC_KEY_2 (1<<1) -#define SEC_KEY_3 (1<<2) -#define SEC_KEY_4 (1<<3) -#define SEC_ACTIVE_KEY (1<<4) -#define SEC_AUTH_MODE (1<<5) -#define SEC_UNICAST_GROUP (1<<6) -#define SEC_LEVEL (1<<7) -#define SEC_ENABLED (1<<8) - -#define SEC_LEVEL_0 0 /* None */ -#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */ -#define SEC_LEVEL_2 2 /* Level 1 + TKIP */ -#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */ -#define SEC_LEVEL_3 4 /* Level 2 + CCMP */ - -#define WEP_KEYS 4 -#define WEP_KEY_LEN 13 - -#define WEP_KEY_LEN_MODIF 32 - -struct ieee80211_security { - u16 active_key:2, - enabled:1, - auth_mode:2, - auth_algo:4, - unicast_uses_group:1; - u8 key_sizes[WEP_KEYS]; - u8 keys[WEP_KEYS][WEP_KEY_LEN_MODIF]; - u8 level; - u16 flags; -} __attribute__ ((packed)); - - -/* |