diff options
85 files changed, 1543 insertions, 915 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc new file mode 100644 index 00000000000..6d9cc253f2b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-soc @@ -0,0 +1,58 @@ +What: /sys/devices/socX +Date: January 2012 +contact: Lee Jones <lee.jones@linaro.org> +Description: + The /sys/devices/ directory contains a sub-directory for each + System-on-Chip (SoC) device on a running platform. Information + regarding each SoC can be obtained by reading sysfs files. This + functionality is only available if implemented by the platform. + + The directory created for each SoC will also house information + about devices which are commonly contained in /sys/devices/platform. + It has been agreed that if an SoC device exists, its supported + devices would be better suited to appear as children of that SoC. + +What: /sys/devices/socX/machine +Date: January 2012 +contact: Lee Jones <lee.jones@linaro.org> +Description: + Read-only attribute common to all SoCs. Contains the SoC machine + name (e.g. Ux500). + +What: /sys/devices/socX/family +Date: January 2012 +contact: Lee Jones <lee.jones@linaro.org> +Description: + Read-only attribute common to all SoCs. Contains SoC family name + (e.g. DB8500). + +What: /sys/devices/socX/soc_id +Date: January 2012 +contact: Lee Jones <lee.jones@linaro.org> +Description: + Read-only attribute supported by most SoCs. In the case of + ST-Ericsson's chips this contains the SoC serial number. + +What: /sys/devices/socX/revision +Date: January 2012 +contact: Lee Jones <lee.jones@linaro.org> +Description: + Read-only attribute supported by most SoCs. Contains the SoC's + manufacturing revision number. + +What: /sys/devices/socX/process +Date: January 2012 +contact: Lee Jones <lee.jones@linaro.org> +Description: + Read-only attribute supported ST-Ericsson's silicon. Contains the + the process by which the silicon chip was manufactured. + +What: /sys/bus/soc +Date: January 2012 +contact: Lee Jones <lee.jones@linaro.org> +Description: + The /sys/bus/soc/ directory contains the usual sub-folders + expected under most buses. /sys/bus/soc/devices is of particular + interest, as it contains a symlink for each SoC device found on + the system. Each symlink points back into the aforementioned + /sys/devices/socX devices. diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt index f959909d715..74e6c778267 100644 --- a/Documentation/dynamic-debug-howto.txt +++ b/Documentation/dynamic-debug-howto.txt @@ -12,7 +12,7 @@ dynamically enabled per-callsite. Dynamic debug has even more useful features: * Simple query language allows turning on and off debugging statements by - matching any combination of: + matching any combination of 0 or 1 of: - source filename - function name @@ -79,31 +79,24 @@ Command Language Reference ========================== At the lexical level, a command comprises a sequence of words separated -by whitespace characters. Note that newlines are treated as word -separators and do *not* end a command or allow multiple commands to -be done together. So these are all equivalent: +by spaces or tabs. So these are all equivalent: nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' > <debugfs>/dynamic_debug/control nullarbor:~ # echo -c ' file svcsock.c line 1603 +p ' > <debugfs>/dynamic_debug/control -nullarbor:~ # echo -c 'file svcsock.c\nline 1603 +p' > - <debugfs>/dynamic_debug/control nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' > <debugfs>/dynamic_debug/control -Commands are bounded by a write() system call. If you want to do -multiple commands you need to do a separate "echo" for each, like: +Command submissions are bounded by a write() system call. +Multiple commands can be written together, separated by ';' or '\n'. -nullarbor:~ # echo 'file svcsock.c line 1603 +p' > /proc/dprintk ;\ -> echo 'file svcsock.c line 1563 +p' > /proc/dprintk + ~# echo "func pnpacpi_get_resources +p; func pnp_assign_mem +p" \ + > <debugfs>/dynamic_debug/control -or even like: +If your query set is big, you can batch them too: -nullarbor:~ # ( -> echo 'file svcsock.c line 1603 +p' ;\ -> echo 'file svcsock.c line 1563 +p' ;\ -> ) > /proc/dprintk + ~# cat query-batch-file > <debugfs>/dynamic_debug/control At the syntactical level, a command comprises a sequence of match specifications, followed by a flags change specification. @@ -144,11 +137,12 @@ func func svc_tcp_accept file - The given string is compared against either the full - pathname or the basename of the source file of each - callsite. Examples: + The given string is compared against either the full pathname, the + src-root relative pathname, or the basename of the source file of + each callsite. Examples: file svcsock.c + file kernel/freezer.c file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c module diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt index 6872c91bce3..4e257587318 100644 --- a/Documentation/filesystems/debugfs.txt +++ b/Documentation/filesystems/debugfs.txt @@ -14,7 +14,10 @@ Debugfs is typically mounted with a command like: mount -t debugfs none /sys/kernel/debug -(Or an equivalent /etc/fstab line). +(Or an equivalent /etc/fstab line). +The debugfs root directory is accessible by anyone by default. To +restrict access to the tree the "uid", "gid" and "mode" mount +options can be used. Note that the debugfs API is exported GPL-only to modules. diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5bed94e189f..6339aa496c4 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -179,6 +179,9 @@ config ARCH_HAS_DEFAULT_IDLE config ARCH_HAS_CACHE_LINE_SIZE def_bool y +config ARCH_HAS_CPU_AUTOPROBE + def_bool y + config HAVE_SETUP_PER_CPU_AREA def_bool y diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index 545d0ce5981..b3350bd32c6 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -28,6 +28,7 @@ #include <crypto/aes.h> #include <crypto/cryptd.h> #include <crypto/ctr.h> +#include <asm/cpu_device_id.h> #include <asm/i387.h> #include <asm/aes.h> #include <crypto/scatterwalk.h> @@ -1253,14 +1254,19 @@ static struct crypto_alg __rfc4106_alg = { }; #endif + +static const struct x86_cpu_id aesni_cpu_id[] = { + X86_FEATURE_MATCH(X86_FEATURE_AES), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, aesni_cpu_id); + static int __init aesni_init(void) { int err; - if (!cpu_has_aes) { - printk(KERN_INFO "Intel AES-NI instructions are not detected.\n"); + if (!x86_match_cpu(aesni_cpu_id)) return -ENODEV; - } if ((err = crypto_fpu_init())) goto fpu_err; diff --git a/arch/x86/crypto/crc32c-intel.c b/arch/x86/crypto/crc32c-intel.c index b9d00261703..493f959261f 100644 --- a/arch/x86/crypto/crc32c-intel.c +++ b/arch/x86/crypto/crc32c-intel.c @@ -31,6 +31,7 @@ #include <crypto/internal/hash.h> #include <asm/cpufeature.h> +#include <asm/cpu_device_id.h> #define CHKSUM_BLOCK_SIZE 1 #define CHKSUM_DIGEST_SIZE 4 @@ -173,13 +174,17 @@ static struct shash_alg alg = { } }; +static const struct x86_cpu_id crc32c_cpu_id[] = { + X86_FEATURE_MATCH(X86_FEATURE_XMM4_2), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, crc32c_cpu_id); static int __init crc32c_intel_mod_init(void) { - if (cpu_has_xmm4_2) - return crypto_register_shash(&alg); - else + if (!x86_match_cpu(crc32c_cpu_id)) return -ENODEV; + return crypto_register_shash(&alg); } static void __exit crc32c_intel_mod_fini(void) diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c index 976aa64d9a2..b4bf0a63b52 100644 --- a/arch/x86/crypto/ghash-clmulni-intel_glue.c +++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c @@ -20,6 +20,7 @@ #include <crypto/gf128mul.h> #include <crypto/internal/hash.h> #include <asm/i387.h> +#include <asm/cpu_device_id.h> #define GHASH_BLOCK_SIZE 16 #define GHASH_DIGEST_SIZE 16 @@ -294,15 +295,18 @@ static struct ahash_alg ghash_async_alg = { }, }; +static const struct x86_cpu_id pcmul_cpu_id[] = { + X86_FEATURE_MATCH(X86_FEATURE_PCLMULQDQ), /* Pickle-Mickle-Duck */ + {} +}; +MODULE_DEVICE_TABLE(x86cpu, pcmul_cpu_id); + static int __init ghash_pclmulqdqni_mod_init(void) { int err; - if (!cpu_has_pclmulqdq) { - printk(KERN_INFO "Intel PCLMULQDQ-NI instructions are not" - " detected.\n"); + if (!x86_match_cpu(pcmul_cpu_id)) return -ENODEV; - } err = crypto_register_shash(&ghash_alg); if (err) diff --git a/arch/x86/include/asm/cpu_device_id.h b/arch/x86/include/asm/cpu_device_id.h new file mode 100644 index 00000000000..ff501e511d9 --- /dev/null +++ b/arch/x86/include/asm/cpu_device_id.h @@ -0,0 +1,13 @@ +#ifndef _CPU_DEVICE_ID +#define _CPU_DEVICE_ID 1 + +/* + * Declare drivers belonging to specific x86 CPUs + * Similar in spirit to pci_device_id and related PCI functions + */ + +#include <linux/mod_devicetable.h> + +extern const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match); + +#endif diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 8d67d428b0f..dcb839eebc7 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -177,6 +177,7 @@ #define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */ #define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */ #define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */ +#define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */ /* Virtualization flags: Linux defined, word 8 */ #define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */ diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 25f24dccdcf..6ab6aa2fdfd 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -16,6 +16,7 @@ obj-y := intel_cacheinfo.o scattered.o topology.o obj-y += proc.o capflags.o powerflags.o common.o obj-y += vmware.o hypervisor.o sched.o mshyperv.o obj-y += rdrand.o +obj-y += match.o obj-$(CONFIG_X86_32) += bugs.o obj-$(CONFIG_X86_64) += bugs_64.o diff --git a/arch/x86/kernel/cpu/match.c b/arch/x86/kernel/cpu/match.c new file mode 100644 index 00000000000..940e2d48307 --- /dev/null +++ b/arch/x86/kernel/cpu/match.c @@ -0,0 +1,92 @@ +#include <asm/cpu_device_id.h> +#include <asm/processor.h> +#include <linux/cpu.h> +#include <linux/module.h> +#include <linux/slab.h> + +/** + * x86_match_cpu - match current CPU again an array of x86_cpu_ids + * @match: Pointer to array of x86_cpu_ids. Last entry terminated with + * {}. + * + * Return the entry if the current CPU matches the entries in the + * passed x86_cpu_id match table. Otherwise NULL. The match table + * contains vendor (X86_VENDOR_*), family, model and feature bits or + * respective wildcard entries. + * + * A typical table entry would be to match a specific CPU + * { X86_VENDOR_INTEL, 6, 0x12 } + * or to match a specific CPU feature + * { X86_FEATURE_MATCH(X86_FEATURE_FOOBAR) } + * + * Fields can be wildcarded with %X86_VENDOR_ANY, %X86_FAMILY_ANY, + * %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor) + * + * Arrays used to match for this should also be declared using + * MODULE_DEVICE_TABLE(x86_cpu, ...) + * + * This always matches against the boot cpu, assuming models and features are + * consistent over all CPUs. + */ +const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match) +{ + const struct x86_cpu_id *m; + struct cpuinfo_x86 *c = &boot_cpu_data; + + for (m = match; m->vendor | m->family | m->model | m->feature; m++) { + if (m->vendor != X86_VENDOR_ANY && c->x86_vendor != m->vendor) + continue; + if (m->family != X86_FAMILY_ANY && c->x86 != m->family) + continue; + if (m->model != X86_MODEL_ANY && c->x86_model != m->model) + continue; + if (m->feature != X86_FEATURE_ANY && !cpu_has(c, m->feature)) + continue; + return m; + } + return NULL; +} +EXPORT_SYMBOL(x86_match_cpu); + +ssize_t arch_print_cpu_modalias(struct device *dev, + struct device_attribute *attr, + char *bufptr) |