aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/ABI/testing/sysfs-module23
-rw-r--r--Documentation/usb/ehci.txt2
-rw-r--r--drivers/usb/Kconfig2
-rw-r--r--drivers/usb/atm/ueagle-atm.c38
-rw-r--r--drivers/usb/gadget/Kconfig4
-rw-r--r--drivers/usb/host/ehci-hcd.c19
-rw-r--r--drivers/usb/host/ehci-hub.c78
-rw-r--r--drivers/usb/host/ehci-msm.c20
-rw-r--r--drivers/usb/host/ehci-q.c82
-rw-r--r--drivers/usb/host/ehci-sched.c17
-rw-r--r--drivers/usb/host/ehci-sysfs.c190
-rw-r--r--drivers/usb/host/ehci.h5
-rw-r--r--drivers/usb/host/ohci-sh.c2
-rw-r--r--drivers/usb/host/pci-quirks.c28
-rw-r--r--drivers/usb/host/r8a66597-hcd.c6
-rw-r--r--drivers/usb/host/r8a66597.h38
-rw-r--r--drivers/usb/mon/mon_text.c9
-rw-r--r--drivers/usb/renesas_usbhs/Kconfig15
-rw-r--r--drivers/usb/renesas_usbhs/common.c23
-rw-r--r--drivers/usb/renesas_usbhs/fifo.c41
-rw-r--r--drivers/usb/renesas_usbhs/mod_gadget.c65
-rw-r--r--drivers/usb/serial/pl2303.c26
-rw-r--r--include/linux/usb/r8a66597.h5
23 files changed, 502 insertions, 236 deletions
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
index cfcec3bffc0..9489ea8e294 100644
--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -10,3 +10,26 @@ KernelVersion: 2.6.35
Contact: masa-korg@dsn.okisemi.com
Description: Write/read Option ROM data.
+
+What: /sys/module/ehci_hcd/drivers/.../uframe_periodic_max
+Date: July 2011
+KernelVersion: 3.1
+Contact: Kirill Smelkov <kirr@mns.spb.ru>
+Description: Maximum time allowed for periodic transfers per microframe (μs)
+
+ [ USB 2.0 sets maximum allowed time for periodic transfers per
+ microframe to be 80%, that is 100 microseconds out of 125
+ microseconds (full microframe).
+
+ However there are cases, when 80% max isochronous bandwidth is
+ too limiting. For example two video streams could require 110
+ microseconds of isochronous bandwidth per microframe to work
+ together. ]
+
+ Through this setting it is possible to raise the limit so that
+ the host controller would allow allocating more than 100
+ microseconds of periodic bandwidth per microframe.
+
+ Beware, non-standard modes are usually not thoroughly tested by
+ hardware designers, and the hardware can malfunction when this
+ setting differ from default 100.
diff --git a/Documentation/usb/ehci.txt b/Documentation/usb/ehci.txt
index 9dcafa7d930..160bd6c3ab7 100644
--- a/Documentation/usb/ehci.txt
+++ b/Documentation/usb/ehci.txt
@@ -210,3 +210,5 @@ TBD: Interrupt and ISO transfer performance issues. Those periodic
transfers are fully scheduled, so the main issue is likely to be how
to trigger "high bandwidth" modes.
+TBD: More than standard 80% periodic bandwidth allocation is possible
+through sysfs uframe_periodic_max parameter. Describe that.
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 8cd999a217b..48f1781352f 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -118,6 +118,8 @@ source "drivers/usb/host/Kconfig"
source "drivers/usb/musb/Kconfig"
+source "drivers/usb/renesas_usbhs/Kconfig"
+
source "drivers/usb/class/Kconfig"
source "drivers/usb/storage/Kconfig"
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index e71521ce301..428f36801e0 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -116,14 +116,14 @@ struct uea_cmvs_v1 {
u32 address;
u16 offset;
u32 data;
-} __attribute__ ((packed));
+} __packed;
struct uea_cmvs_v2 {
u32 group;
u32 address;
u32 offset;
u32 data;
-} __attribute__ ((packed));
+} __packed;
/* information about currently processed cmv */
struct cmv_dsc_e1 {
@@ -352,7 +352,7 @@ struct block_index {
__le32 PageAddress;
__le16 dummy1;
__le16 PageNumber;
-} __attribute__ ((packed));
+} __packed;
#define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
#define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)
@@ -367,7 +367,7 @@ struct l1_code {
u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
u8 code[0];
-} __attribute__ ((packed));
+} __packed;
/* structures describing a block within a DSP page */
struct block_info_e1 {
@@ -377,7 +377,7 @@ struct block_info_e1 {
__le16 wOvlOffset;
__le16 wOvl; /* overlay */
__le16 wLast;
-} __attribute__ ((packed));
+} __packed;
#define E1_BLOCK_INFO_SIZE 12
struct block_info_e4 {
@@ -387,7 +387,7 @@ struct block_info_e4 {
__be32 dwSize;
__be32 dwAddress;
__be16 wReserved;
-} __attribute__ ((packed));
+} __packed;
#define E4_BLOCK_INFO_SIZE 14
#define UEA_BIHDR 0xabcd
@@ -467,7 +467,7 @@ struct cmv_e1 {
__le32 dwSymbolicAddress;
__le16 wOffsetAddress;
__le32 dwData;
-} __attribute__ ((packed));
+} __packed;
struct cmv_e4 {
__be16 wGroup;
@@ -475,17 +475,17 @@ struct cmv_e4 {
__be16 wOffset;
__be16 wAddress;
__be32 dwData[6];
-} __attribute__ ((packed));
+} __packed;
/* structures representing swap information */
struct swap_info_e1 {
__u8 bSwapPageNo;
__u8 bOvl; /* overlay */
-} __attribute__ ((packed));
+} __packed;
struct swap_info_e4 {
__u8 bSwapPageNo;
-} __attribute__ ((packed));
+} __packed;
/* structures representing interrupt data */
#define e1_bSwapPageNo u.e1.s1.swapinfo.bSwapPageNo
@@ -499,23 +499,23 @@ union intr_data_e1 {
struct {
struct swap_info_e1 swapinfo;
__le16 wDataSize;
- } __attribute__ ((packed)) s1;
+ } __packed s1;
struct {
struct cmv_e1 cmv;
__le16 wDataSize;
- } __attribute__ ((packed)) s2;
-} __attribute__ ((packed));
+ } __packed s2;
+} __packed;
union intr_data_e4 {
struct {
struct swap_info_e4 swapinfo;
__le16 wDataSize;
- } __attribute__ ((packed)) s1;
+ } __packed s1;
struct {
struct cmv_e4 cmv;
__le16 wDataSize;
- } __attribute__ ((packed)) s2;
-} __attribute__ ((packed));
+ } __packed s2;
+} __packed;
struct intr_pkt {
__u8 bType;
@@ -528,15 +528,15 @@ struct intr_pkt {
union intr_data_e1 e1;
union intr_data_e4 e4;
} u;
-} __attribute__ ((packed));
+} __packed;
#define E1_INTR_PKT_SIZE 28
#define E4_INTR_PKT_SIZE 64
static struct usb_driver uea_driver;
static DEFINE_MUTEX(uea_mutex);
-static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III",
- "Eagle IV"};
+static const char * const chip_name[] = {
+ "ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
static int modem_index;
static unsigned int debug;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b0594d90754..44b6b40aafb 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -216,9 +216,11 @@ config USB_R8A66597
dynamically linked module called "r8a66597_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_RENESAS_USBHS
+config USB_RENESAS_USBHS_UDC
tristate 'Renesas USBHS controller'
depends on SUPERH || ARCH_SHMOBILE
+ depends on USB_RENESAS_USBHS
+ select USB_GADGET_DUALSPEED
help
Renesas USBHS is a discrete USB host and peripheral controller chip
that supports both full and high speed USB 2.0 data transfers.
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e18862c5b05..2902199fa8f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -90,7 +90,8 @@ static const char hcd_name [] = "ehci_hcd";
#define EHCI_IAA_MSECS 10 /* arbitrary */
#define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */
#define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */
-#define EHCI_SHRINK_FRAMES 5 /* async qh unlink delay */
+#define EHCI_SHRINK_JIFFIES (DIV_ROUND_UP(HZ, 200) + 1)
+ /* 200-ms async qh unlink delay */
/* Initial IRQ latency: faster than hw default */
static int log2_irq_thresh = 0; // 0 to 6
@@ -148,10 +149,7 @@ timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action)
break;
/* case TIMER_ASYNC_SHRINK: */
default:
- /* add a jiffie since we synch against the
- * 8 KHz uframe counter.
- */
- t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
+ t = EHCI_SHRINK_JIFFIES;
break;
}
mod_timer(&ehci->watchdog, t + jiffies);
@@ -336,6 +334,7 @@ static void ehci_work(struct ehci_hcd *ehci);
#include "ehci-mem.c"
#include "ehci-q.c"
#include "ehci-sched.c"
+#include "ehci-sysfs.c"
/*-------------------------------------------------------------------------*/
@@ -520,7 +519,7 @@ static void ehci_stop (struct usb_hcd *hcd)
ehci_reset (ehci);
spin_unlock_irq(&ehci->lock);
- remove_companion_file(ehci);
+ remove_sysfs_files(ehci);
remove_debug_files (ehci);
/* root hub is shut down separately (first, when possible) */
@@ -571,6 +570,12 @@ static int ehci_init(struct usb_hcd *hcd)
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
/*
+ * by default set standard 80% (== 100 usec/uframe) max periodic
+ * bandwidth as required by USB 2.0
+ */
+ ehci->uframe_periodic_max = 100;
+
+ /*
* hw default: 1K periodic list heads, one per frame.
* periodic_size can shrink by USBCMD update if hcc_params allows.
*/
@@ -754,7 +759,7 @@ static int ehci_run (struct usb_hcd *hcd)
* since the class device isn't created that early.
*/
create_debug_files(ehci);
- create_companion_file(ehci);
+ create_sysfs_files(ehci);
return 0;
}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index ea6184bf48d..bf2c8f65e1a 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -471,29 +471,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
/*-------------------------------------------------------------------------*/
-/* Display the ports dedicated to the companion controller */
-static ssize_t show_companion(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct ehci_hcd *ehci;
- int nports, index, n;
- int count = PAGE_SIZE;
- char *ptr = buf;
-
- ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
- nports = HCS_N_PORTS(ehci->hcs_params);
-
- for (index = 0; index < nports; ++index) {
- if (test_bit(index, &ehci->companion_ports)) {
- n = scnprintf(ptr, count, "%d\n", index + 1);
- ptr += n;
- count -= n;
- }
- }
- return ptr - buf;
-}
-
/*
* Sets the owner of a port
*/
@@ -528,58 +505,6 @@ static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
}
}
-/*
- * Dedicate or undedicate a port to the companion controller.
- * Syntax is "[-]portnum", where a leading '-' sign means
- * return control of the port to the EHCI controller.
- */
-static ssize_t store_companion(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct ehci_hcd *ehci;
- int portnum, new_owner;
-
- ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
- new_owner = PORT_OWNER; /* Owned by companion */
- if (sscanf(buf, "%d", &portnum) != 1)
- return -EINVAL;
- if (portnum < 0) {
- portnum = - portnum;
- new_owner = 0; /* Owned by EHCI */
- }
- if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
- return -ENOENT;
- portnum--;
- if (new_owner)
- set_bit(portnum, &ehci->companion_ports);
- else
- clear_bit(portnum, &ehci->companion_ports);
- set_owner(ehci, portnum, new_owner);
- return count;
-}
-static DEVICE_ATTR(companion, 0644, show_companion, store_companion);
-
-static inline int create_companion_file(struct ehci_hcd *ehci)
-{
- int i = 0;
-
- /* with integrated TT there is no companion! */
- if (!ehci_is_TDI(ehci))
- i = device_create_file(ehci_to_hcd(ehci)->self.controller,
- &dev_attr_companion);
- return i;
-}
-
-static inline void remove_companion_file(struct ehci_hcd *ehci)
-{
- /* with integrated TT there is no companion! */
- if (!ehci_is_TDI(ehci))
- device_remove_file(ehci_to_hcd(ehci)->self.controller,
- &dev_attr_companion);
-}
-
-
/*-------------------------------------------------------------------------*/
static int check_reset_complete (
@@ -891,10 +816,11 @@ static int ehci_hub_control (
* power switching; they're allowed to just limit the
* current. khubd will turn the power back on.
*/
- if (HCS_PPC (ehci->hcs_params)){
+ if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
ehci_writel(ehci,
temp & ~(PORT_RWC_BITS | PORT_POWER),
status_reg);
+ temp = ehci_readl(ehci, status_reg);
}
}
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index b5a0bf649c9..592d5f76803 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -40,27 +40,9 @@ static int ehci_msm_reset(struct usb_hcd *hcd)
int retval;
ehci->caps = USB_CAPLENGTH;
- ehci->regs = USB_CAPLENGTH +
- HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
- dbg_hcs_params(ehci, "reset");
- dbg_hcc_params(ehci, "reset");
-
- /* cache the data to minimize the chip reads*/
- ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-
hcd->has_tt = 1;
- ehci->sbrn = HCD_USB2;
-
- retval = ehci_halt(ehci);
- if (retval)
- return retval;
-
- /* data structure init */
- retval = ehci_init(hcd);
- if (retval)
- return retval;
- retval = ehci_reset(ehci);
+ retval = ehci_setup(hcd);
if (retval)
return retval;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 5d6bc624c96..9bf3c0d983c 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1231,6 +1231,8 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
prev->hw->hw_next = qh->hw->hw_next;
prev->qh_next = qh->qh_next;
+ if (ehci->qh_scan_next == qh)
+ ehci->qh_scan_next = qh->qh_next.qh;
wmb ();
/* If the controller isn't running, we don't have to wait for it */
@@ -1256,53 +1258,49 @@ static void scan_async (struct ehci_hcd *ehci)
struct ehci_qh *qh;
enum ehci_timer_action action = TIMER_IO_WATCHDOG;
- ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index);
timer_action_done (ehci, TIMER_ASYNC_SHRINK);
-rescan:
stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
- qh = ehci->async->qh_next.qh;
- if (likely (qh != NULL)) {
- do {
- /* clean any finished work for this qh */
- if (!list_empty(&qh->qtd_list) && (stopped ||
- qh->stamp != ehci->stamp)) {
- int temp;
-
- /* unlinks could happen here; completion
- * reporting drops the lock. rescan using
- * the latest schedule, but don't rescan
- * qhs we already finished (no looping)
- * unless the controller is stopped.
- */
- qh = qh_get (qh);
- qh->stamp = ehci->stamp;
- temp = qh_completions (ehci, qh);
- if (qh->needs_rescan)
- unlink_async(ehci, qh);
- qh_put (qh);
- if (temp != 0) {
- goto rescan;
- }
- }
- /* unlink idle entries, reducing DMA usage as well
- * as HCD schedule-scanning costs. delay for any qh
- * we just scanned, there's a not-unusual case that it
- * doesn't stay idle for long.
- * (plus, avoids some kind of re-activation race.)
+ ehci->qh_scan_next = ehci->async->qh_next.qh;
+ while (ehci->qh_scan_next) {
+ qh = ehci->qh_scan_next;
+ ehci->qh_scan_next = qh->qh_next.qh;
+ rescan:
+ /* clean any finished work for this qh */
+ if (!list_empty(&qh->qtd_list)) {
+ int temp;
+
+ /*
+ * Unlinks could happen here; completion reporting
+ * drops the lock. That's why ehci->qh_scan_next
+ * always holds the next qh to scan; if the next qh
+ * gets unlinked then ehci->qh_scan_next is adjusted
+ * in start_unlink_async().
*/
- if (list_empty(&qh->qtd_list)
- && qh->qh_state == QH_STATE_LINKED) {
- if (!ehci->reclaim && (stopped ||
- ((ehci->stamp - qh->stamp) & 0x1fff)
- >= EHCI_SHRINK_FRAMES * 8))
- start_unlink_async(ehci, qh);
- else
- action = TIMER_ASYNC_SHRINK;
- }
+ qh = qh_get(qh);
+ temp = qh_completions(ehci, qh);
+ if (qh->needs_rescan)
+ unlink_async(ehci, qh);
+ qh->unlink_time = jiffies + EHCI_SHRINK_JIFFIES;
+ qh_put(qh);
+ if (temp != 0)
+ goto rescan;
+ }
- qh = qh->qh_next.qh;
- } while (qh);
+ /* unlink idle entries, reducing DMA usage as well
+ * as HCD schedule-scanning costs. delay for any qh
+ * we just scanned, there's a not-unusual case that it
+ * doesn't stay idle for long.
+ * (plus, avoids some kind of re-activation race.)
+ */
+ if (list_empty(&qh->qtd_list)
+ && qh->qh_state == QH_STATE_LINKED) {
+ if (!ehci->reclaim && (stopped ||
+ time_after_eq(jiffies, qh->unlink_time)))
+ start_unlink_async(ehci, qh);
+ else
+ action = TIMER_ASYNC_SHRINK;
+ }
}
if (action == TIMER_ASYNC_SHRINK)
timer_action (ehci, TIMER_ASYNC_SHRINK);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 6c9fbe352f7..2abf8543f08 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -172,7 +172,7 @@ periodic_usecs (struct ehci_hcd *ehci, unsigned frame, unsigned uframe)
}
}
#ifdef DEBUG
- if (usecs > 100)
+ if (usecs > ehci->uframe_periodic_max)
ehci_err (ehci, "uframe %d sched overrun: %d usecs\n",
frame * 8 + uframe, usecs);
#endif
@@ -709,11 +709,8 @@ static int check_period (
if (uframe >= 8)
return 0;
- /*
- * 80% periodic == 100 usec/uframe available
- * convert "usecs we need" to "max already claimed"
- */
- usecs = 100 - usecs;
+ /* convert "usecs we need" to "max already claimed" */
+ usecs = ehci->uframe_periodic_max - usecs;
/* we "know" 2 and 4 uframe intervals were rejected; so
* for period 0, check _every_ microframe in the schedule.
@@ -1286,9 +1283,9 @@ itd_slot_ok (
{
uframe %= period;
do {
- /* can't commit more than 80% periodic == 100 usec */
+ /* can't commit more than uframe_periodic_max usec */
if (periodic_usecs (ehci, uframe >> 3, uframe & 0x7)
- > (100 - usecs))
+ > (ehci->uframe_periodic_max - usecs))
return 0;
/* we know urb->interval is 2^N uframes */
@@ -1345,7 +1342,7 @@ sitd_slot_ok (
#endif
/* check starts (OUT uses more than one) */
- max_used = 100 - stream->usecs;
+ max_used = ehci->uframe_periodic_max - stream->usecs;
for (tmp = stream->raw_mask & 0xff; tmp; tmp >>= 1, uf++) {
if (periodic_usecs (ehci, frame, uf) > max_used)
return 0;
@@ -1354,7 +1351,7 @@ sitd_slot_ok (
/* for IN, check CSPLIT */
if (stream->c_usecs) {
uf = uframe & 7;
- max_used = 100 - stream->c_usecs;
+ max_used = ehci->uframe_periodic_max - stream->c_usecs;
do {
tmp = 1 << uf;
tmp <<= 8;
diff --git a/drivers/usb/host/ehci-sysfs.c b/drivers/usb/host/ehci-sysfs.c
new file mode 100644
index 00000000000..14ced00ba22
--- /dev/null
+++ b/drivers/usb/host/ehci-sysfs.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2007 by Alan Stern
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* this file is part of ehci-hcd.c */
+
+
+/* Display the ports dedicated to the companion controller */
+static ssize_t show_companion(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ehci_hcd *ehci;
+ int nports, index, n;
+ int count = PAGE_SIZE;
+ char *ptr = buf;
+
+ ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+ nports = HCS_N_PORTS(ehci->hcs_params);
+
+ for (index = 0; index < nports; ++index) {
+ if (test_bit(index, &ehci->companion_ports)) {
+ n = scnprintf(ptr, count, "%d\n", index + 1);
+ ptr += n;
+ count -= n;
+ }
+ }
+ return ptr - buf;
+}
+
+/*
+ * Dedicate or undedicate a port to the companion controller.
+ * Syntax is "[-]portnum", where a leading '-' sign means
+ * return control of the port to the EHCI controller.
+ */
+static ssize_t store_companion(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ehci_hcd *ehci;
+ int portnum, new_owner;
+
+ ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+ new_owner = PORT_OWNER; /* Owned by companion */
+ if (sscanf(buf, "%d", &portnum) != 1)
+ return -EINVAL;
+ if (portnum < 0) {
+ portnum = - portnum;
+ new_owner = 0; /* Owned by EHCI */
+ }
+ if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
+ return -ENOENT;
+ portnum--;
+ if (new_owner)
+ set_bit(portnum, &ehci->companion_ports);
+ else
+ clear_bit(portnum, &ehci->companion_ports);
+ set_owner(ehci, portnum, new_owner);
+ return count;
+}
+static DEVICE_ATTR(companion, 0644, show_companion, store_companion);
+
+
+/*
+ * Display / Set uframe_periodic_max
+ */
+static ssize_t show_uframe_periodic_max(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ehci_hcd *ehci;
+ int n;
+
+ ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+ n = scnprintf(buf, PAGE_SIZE, "%d\n", ehci->uframe_periodic_max);
+ return n;
+}
+
+
+static ssize_t store_uframe_periodic_max(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ehci_hcd *ehci;
+ unsigned uframe_periodic_max;
+ unsigned frame, uframe;
+ unsigned short allocated_max;
+ unsigned long flags;
+ ssize_t ret;
+
+ ehci = hcd_to_ehci(bus_to_hcd(dev_get_drvdata(dev)));
+ if (kstrtouint(buf, 0, &uframe_periodic_max) < 0)
+ return -EINVAL;
+
+ if (uframe_periodic_max < 100 || uframe_periodic_max >= 125) {
+ ehci_info(ehci, "rejecting invalid request for "
+ "uframe_periodic_max=%u\n", uframe_periodic_max);
+ return -EINVAL;
+ }
+
+ ret = -EINVAL;
+
+ /*
+ * lock, so that our checking does not race with possible periodic
+ * bandwidth allocation through submitting new urbs.
+ */
+ spin_lock_irqsave (&ehci->lock, flags);
+
+ /*
+ * for request to decrease max periodic bandwidth, we have to check
+ * every microframe in the schedule to see whether the decrease is
+ * possible.
+ */
+ if (uframe_periodic_max < ehci->uframe_periodic_max) {
+ allocated_max = 0;
+
+ for (frame = 0; frame < ehci->periodic_size; ++frame)
+ for (uframe = 0; uframe < 7; ++uframe)
+ allocated_max = max(allocated_max,
+ periodic_usecs (ehci, frame, uframe));
+
+ if (allocated_max > uframe_periodic_max) {
+ ehci_info(ehci,
+ "cannot decrease uframe_periodic_max becase "
+ "periodic bandwidth is already allocated "
+ "(%u > %u)\n",
+ allocated_max, uframe_periodic_max);
+ goto out_unlock;
+ }
+ }
+
+ /* increasing is always ok */
+
+ ehci_info(ehci, "setting max periodic bandwidth to %u%% "
+ "(== %u usec/uframe)\n",
+ 100*uframe_periodic_max/125, uframe_periodic_max);
+
+ if (uframe_periodic_max != 100)
+ ehci_warn(ehci, "max periodic bandwidth set is non-standard\n");
+
+ ehci->uframe_periodic_max = uframe_periodic_max;
+ ret = count;
+
+out_unlock:
+ spin_unlock_irqrestore (&ehci->lock, flags);
+ return ret;
+}
+static DEVICE_ATTR(uframe_periodic_max, 0644, show_uframe_periodic_max, store_uframe_periodic_max);
+
+
+static inline int create_sysfs_files(struct ehci_hcd *ehci)
+{
+ struct device *controller = ehci_to_hcd(ehci)->self.controller;
+ int i = 0;
+
+ /* with integrated TT there is no companion! */
+ if (!ehci_is_TDI(ehci))
+ i = device_create_file(controller, &dev_attr_companion);
+ if (i)
+ goto out;
+
+ i = device_create_file(controller, &dev_attr_uframe_periodic_max);
+out:
+ return i;
+}
+
+static inline void remove_sysfs_files(struct ehci_hcd *ehci)
+{
+ struct device *controller = ehci_to_hcd(ehci)->self.controller;
+
+ /* with integrated TT there is no companion! */
+ if (!ehci_is_TDI(ehci))
+ device_remove_file(controller, &dev_attr_companion);
+
+ device_remove_file(controller, &dev_attr_uframe_periodic_max);
+}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bd6ff489baf..e4feec3457f 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -75,6 +75,7 @@ struct ehci_hcd { /* one per controller */
struct ehci_qh *async;
struct ehci_qh *dummy; /* For AMD quirk use */
struct ehci_qh *reclaim;
+ struct ehci_qh *qh_scan_next;
unsigned scanning : 1;
/* periodic schedule support */
@@ -87,6 +88,8 @@ struct ehci_hcd { /* one per controller */
union ehci_shadow *pshadow; /* mirror hw periodic table */
int next_uframe; /* scan periodic, start here */
unsigned periodic_sched; /* periodic activity count */
+ unsigned uframe_periodic_max; /* max periodic time per uframe */
+
/* list of itds & sitds completed while clock_frame was still active */
struct list_head cached_itd_list;
@@ -117,7 +120,6 @@ struct ehci_hcd { /* one per controller */
struct timer_list iaa_watchdog;
struct timer_list watchdog;
unsigned long actions;
- unsigned stamp;
unsigned periodic_stamp;
unsigned random_frame;
unsigned long next_statechange;
@@ -343,6 +345,7 @@ struct ehci_qh {
struct ehci_qh *reclaim; /* next to reclaim */
struct ehci_hcd *ehci;
+ unsigned long unlink_time;
/*
* Do NOT use atomic operations for QH refcounting. On some CPUs
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index f47867ff78c..14cecb52a9f 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2008 Renesas Solutions Corp.
*
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index fd930618c28..b5a7304fcbe 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -507,20 +507,34 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
iounmap(base);
}
+static const struct dmi_system_id __initconst ehci_dmi_nohandoff_table[] = {
+ {
+ /* Pegatron Lucid (ExoPC) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "EXOPG06411"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-CE-133"),
+ },
+ },
+ {
+ /* Pegatron Lucid (Ordissimo AIRIS) */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "M11JB"),
+ DMI_MATCH(DMI_BIOS_VERSION, "Lucid-GE-133"),
+ },
+ },
+ { }
+};
+
static void __devinit ehci_bios_handoff(struct pci_dev *pdev,
void __iomem *op_reg_base,
u32 cap, u8 offset)
{
int try_handoff = 1, tried_handoff = 0;
- /* The Pegatron Lucid (ExoPC) tablet sporadically waits for 90
- * seconds trying the handoff on its unused controller. Skip
- * it. */
+ /* The Pegatron Lucid tablet sporadically waits for 98 seconds trying
+ * the handoff on its unused controller. Skip it. */
if (pdev->vendor == 0x8086 && pdev->device == 0x283a) {
- const char *dmi_bn = dmi_get_system_info(DMI_BOARD_NAME);
- const char *dmi_bv = dmi_get_system_info(DMI_BIOS_VERSION);
- if (dmi_bn && !strcmp(dmi_bn, "EXOPG06411") &&
- dmi_bv && !strcmp(dmi_bv, "Lucid-CE-133"))
+ if (dmi_check_system(ehci_dmi_nohandoff_table))
try_handoff = 0;
}
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index db6f8b9c19b..fd35901861c 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -6,7 +6,7 @@
* Portions Copyright (C) 2004-2005 David Brownell
* Portions Copyright (C) 1999 Roman Weissgaerber
*
- * Author : Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -1438,7 +1438,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum)
if (pipenum > 0)
r8a66597_write(r8a66597, ~(1 << pipenum), BEMPSTS);
if (urb->transfer_buffer) {
- r8a66597_write_fifo(r8a66597, td->pipe->fifoaddr, buf, size);
+ r8a66597_write_fifo(r8a66597, td->pipe, buf, size);
if (!usb_pipebulk(urb->pipe) || td->maxpacket != size)
r8a66597_write(r8a66597, BVAL, td->pipe->fifoctr);
}
@@ -2306,7 +2306,7 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
dbg("resume port = %d", port);
rh->port &= ~USB_PORT_STAT_SUSPEND;
- rh->port |= USB_PORT_STAT_C_SUSPEND < 16;
+ rh->port |= USB_PORT_STAT_C_SUSPEND << 16;
r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
msleep(50);
r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
diff --git