diff options
84 files changed, 2275 insertions, 394 deletions
diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt index 1881e1c6dda..c6ba6d3c747 100644 --- a/Documentation/devicetree/bindings/arm/sirf.txt +++ b/Documentation/devicetree/bindings/arm/sirf.txt @@ -1,3 +1,9 @@ -prima2 "cb" evaluation board +CSR SiRFprimaII and SiRFmarco device tree bindings. +======================================== + Required root node properties: - - compatible = "sirf,prima2-cb", "sirf,prima2"; + - compatible: + - "sirf,prima2-cb" : prima2 "cb" evaluation board + - "sirf,marco-cb" : marco "cb" evaluation board + - "sirf,prima2" : prima2 device based board + - "sirf,marco" : marco device based board diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt index d657832c681..87dc1ddf477 100644 --- a/Documentation/devicetree/bindings/arm/vt8500.txt +++ b/Documentation/devicetree/bindings/arm/vt8500.txt @@ -12,3 +12,11 @@ compatible = "wm,wm8505"; Boards with the Wondermedia WM8650 SoC shall have the following properties: Required root node property: compatible = "wm,wm8650"; + +Boards with the Wondermedia WM8750 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8750"; + +Boards with the Wondermedia WM8850 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8850"; diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.txt b/Documentation/devicetree/bindings/clock/imx31-clock.txt new file mode 100644 index 00000000000..19df842c694 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx31-clock.txt @@ -0,0 +1,91 @@ +* Clock bindings for Freescale i.MX31 + +Required properties: +- compatible: Should be "fsl,imx31-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX31 +clocks and IDs. + + Clock ID + ----------------------- + dummy 0 + ckih 1 + ckil 2 + mpll 3 + spll 4 + upll 5 + mcu_main 6 + hsp 7 + ahb 8 + nfc 9 + ipg 10 + per_div 11 + per 12 + csi_sel 13 + fir_sel 14 + csi_div 15 + usb_div_pre 16 + usb_div_post 17 + fir_div_pre 18 + fir_div_post 19 + sdhc1_gate 20 + sdhc2_gate 21 + gpt_gate 22 + epit1_gate 23 + epit2_gate 24 + iim_gate 25 + ata_gate 26 + sdma_gate 27 + cspi3_gate 28 + rng_gate 29 + uart1_gate 30 + uart2_gate 31 + ssi1_gate 32 + i2c1_gate 33 + i2c2_gate 34 + i2c3_gate 35 + hantro_gate 36 + mstick1_gate 37 + mstick2_gate 38 + csi_gate 39 + rtc_gate 40 + wdog_gate 41 + pwm_gate 42 + sim_gate 43 + ect_gate 44 + usb_gate 45 + kpp_gate 46 + ipu_gate 47 + uart3_gate 48 + uart4_gate 49 + uart5_gate 50 + owire_gate 51 + ssi2_gate 52 + cspi1_gate 53 + cspi2_gate 54 + gacc_gate 55 + emi_gate 56 + rtic_gate 57 + firi_gate 58 + +Examples: + +clks: ccm@53f80000{ + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <0 31 0x04 0 53 0x04>; + #clock-cells = <1>; +}; + +uart1: serial@43f90000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 10>, <&clks 30>; + clock-names = "ipg", "per"; + status = "disabled"; +}; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 67874b82a4e..a3ffd1a391a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -393,6 +393,7 @@ config ARCH_GEMINI config ARCH_SIRF bool "CSR SiRF" select ARCH_REQUIRE_GPIOLIB + select AUTO_ZRELADDR select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP @@ -949,22 +950,6 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1/2/3/4). -config ARCH_VT8500_SINGLE - bool "VIA/WonderMedia 85xx" - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select COMMON_CLK - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select GENERIC_GPIO - select HAVE_CLK - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select USE_OF - help - Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. - endchoice menu "Multiple platform selection" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 661030d6bc6..af3987cb9e4 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -386,6 +386,20 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. + config DEBUG_SIRFPRIMA2_UART1 + bool "Kernel low-level debugging messages via SiRFprimaII UART1" + depends on ARCH_PRIMA2 + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFprimaII devices. + + config DEBUG_SIRFMARCO_UART1 + bool "Kernel low-level debugging messages via SiRFmarco UART1" + depends on ARCH_MARCO + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFmarco devices. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -412,6 +426,13 @@ choice of the tiles using the RS1 memory map, including all new A-class core tiles, FPGA-based SMMs and software models. + config DEBUG_VT8500_UART0 + bool "Use UART0 on VIA/Wondermedia SoCs" + depends on ARCH_VT8500 + help + This option selects UART0 on VIA/Wondermedia System-on-a-chip + devices, including VT8500, WM8505, WM8650 and WM8850. + config DEBUG_LL_UART_NONE bool "No low-level debugging UART" depends on !ARCH_MULTIPLATFORM @@ -506,6 +527,7 @@ config DEBUG_LL_INCLUDE default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 + default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e44da40d984..b34479014f9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb \ kirkwood-openblocks_a6.dtb +dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -151,7 +152,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ - wm8650-mid.dtb + wm8650-mid.dtb \ + wm8850-w70v2.dtb dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb targets += dtbs diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index eef7099f3e3..454c2d17540 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -45,6 +45,8 @@ compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43f90000 0x4000>; interrupts = <45>; + clocks = <&clks 10>, <&clks 30>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -52,12 +54,16 @@ compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43f94000 0x4000>; interrupts = <32>; + clocks = <&clks 10>, <&clks 31>; + clock-names = "ipg", "per"; status = "disabled"; }; uart4: serial@43fb0000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43fb0000 0x4000>; + clocks = <&clks 10>, <&clks 49>; + clock-names = "ipg", "per"; interrupts = <46>; status = "disabled"; }; @@ -66,6 +72,8 @@ compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43fb4000 0x4000>; interrupts = <47>; + clocks = <&clks 10>, <&clks 50>; + clock-names = "ipg", "per"; status = "disabled"; }; }; @@ -81,8 +89,17 @@ compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; interrupts = <18>; + clocks = <&clks 10>, <&clks 48>; + clock-names = "ipg", "per"; status = "disabled"; }; + + clks: ccm@53f80000{ + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <0 31 0x04 0 53 0x04>; + #clock-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/marco-evb.dts b/arch/arm/boot/dts/marco-evb.dts new file mode 100644 index 00000000000..5130aeacfca --- /dev/null +++ b/arch/arm/boot/dts/marco-evb.dts @@ -0,0 +1,54 @@ +/* + * DTS file for CSR SiRFmarco Evaluation Board + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "marco.dtsi" + +/ { + model = "CSR SiRFmarco Evaluation Board"; + compatible = "sirf,marco-cb", "sirf,marco"; + + memory { + reg = <0x40000000 0x60000000>; + }; + + axi { + peri-iobg { + uart1: uart@cc060000 { + status = "okay"; + }; + uart2: uart@cc070000 { + status = "okay"; + }; + i2c0: i2c@cc0e0000 { + status = "okay"; + fpga-cpld@4d { + compatible = "sirf,fpga-cpld"; + reg = <0x4d>; + }; + }; + spi1: spi@cc170000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + pci-iobg { + sd0: sdhci@cd000000 { + bus-width = <8>; + status = "okay"; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi new file mode 100644 index 00000000000..1579c3491cc --- /dev/null +++ b/arch/arm/boot/dts/marco.dtsi @@ -0,0 +1,756 @@ +/* + * DTS file for CSR SiRFmarco SoC + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,marco"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0xa0000000>; + + l2-cache-controller@c0030000 { + compatible = "sirf,marco-pl310-cache", "arm,pl310-cache"; + reg = <0xc0030000 0x1000>; + interrupts = <0 59 0>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1> |