diff options
34 files changed, 582 insertions, 634 deletions
diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug index af4fd5f8f8d..87233acef18 100644 --- a/arch/m68k/Kconfig.debug +++ b/arch/m68k/Kconfig.debug @@ -10,6 +10,17 @@ config BOOTPARAM_STRING default 'console=ttyS0,19200' depends on BOOTPARAM +config EARLY_PRINTK + bool "Early printk" if EMBEDDED + depends on MVME16x || MAC + default y + help + Write kernel log output directly to a serial port. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. + You should normally say N here, unless you want to debug such a crash. + if !MMU config FULLDEBUG diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices index 6033f5d4e67..04a3d9be90e 100644 --- a/arch/m68k/Kconfig.devices +++ b/arch/m68k/Kconfig.devices @@ -8,8 +8,8 @@ config ARCH_MAY_HAVE_PC_FDC menu "Platform devices" config HEARTBEAT - bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40 - default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300 + bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40 + default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300 help Use the power-on LED on your machine as a load meter. The exact behavior is platform-dependent, but normally the flash frequency is @@ -59,27 +59,6 @@ endmenu menu "Character devices" -config ATARI_MFPSER - tristate "Atari MFP serial support" - depends on ATARI - ---help--- - If you like to use the MFP serial ports ("Modem1", "Serial1") under - Linux, say Y. The driver equally supports all kinds of MFP serial - ports and automatically detects whether Serial1 is available. - - To compile this driver as a module, choose M here. - - Note for Falcon users: You also have an MFP port, it's just not - wired to the outside... But you could use the port under Linux. - -config ATARI_MIDI - tristate "Atari MIDI serial support" - depends on ATARI - help - If you want to use your Atari's MIDI port in Linux, say Y. - - To compile this driver as a module, choose M here. - config ATARI_DSP56K tristate "Atari DSP56k support (EXPERIMENTAL)" depends on ATARI && EXPERIMENTAL @@ -99,15 +78,6 @@ config AMIGA_BUILTIN_SERIAL To compile this driver as a module, choose M here. -config MULTIFACE_III_TTY - tristate "Multiface Card III serial support" - depends on AMIGA - help - If you want to use a Multiface III card's serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - config HPDCA tristate "HP DCA serial support" depends on DIO && SERIAL_8250 @@ -122,13 +92,9 @@ config HPAPCI If you want to use the internal "APCI" serial ports on an HP400 machine, say Y here. -config DN_SERIAL - bool "Support for DN serial port (dummy)" - depends on APOLLO - config SERIAL_CONSOLE bool "Support for serial port console" - depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL) + depends on AMIGA_BUILTIN_SERIAL=y ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all @@ -140,10 +106,10 @@ config SERIAL_CONSOLE (/dev/tty0) will still be used as the system console by default, but you can alter that using a kernel command line option such as "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) + your boot loader about how to pass options to the kernel at boot + time.) - If you don't have a VGA card installed and you say Y here, the + If you don't have a graphical console and you say Y here, the kernel will automatically use the first serial line, /dev/ttyS0, as system console. diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 6d196dadfdb..8048e1b7e55 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -82,8 +82,6 @@ __ALIGN_STR "\n\t" extern void atari_microwire_cmd(int cmd); -extern int atari_SCC_reset_done; - static unsigned int atari_irq_startup(struct irq_data *data) { unsigned int irq = data->irq; diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c index 5a484247e49..a547ba9683d 100644 --- a/arch/m68k/atari/debug.c +++ b/arch/m68k/atari/debug.c @@ -202,7 +202,6 @@ static void __init atari_init_mfp_port(int cflag) static void __init atari_init_scc_port(int cflag) { - extern int atari_SCC_reset_done; static int clksrc_table[9] = /* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */ { 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 }; diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index dbb49fc6463..e93fdae10b2 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -255,7 +255,6 @@ CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set CONFIG_AMIGA_BUILTIN_SERIAL=y -CONFIG_MULTIFACE_III_TTY=m CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 562b221f695..66b26c1e848 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -223,8 +223,6 @@ CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set -CONFIG_DN_SERIAL=y -CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 82978df637f..15133251598 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -235,10 +235,7 @@ CONFIG_DMASOUND_ATARI=m CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set -CONFIG_ATARI_MFPSER=y -CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m -CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index ad9e85760e3..55d394edf63 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -318,13 +318,8 @@ CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set -CONFIG_ATARI_MFPSER=y -CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y -CONFIG_MULTIFACE_III_TTY=m -CONFIG_SERIAL167=y -CONFIG_DN_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index c45aaf3b816..cdb70d66e53 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -218,8 +218,6 @@ CONFIG_GEN_RTC_X=y CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_USB_SUPPORT is not set -CONFIG_SERIAL167=y -CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/m68k/emu/nfeth.c b/arch/m68k/emu/nfeth.c index c5748bb4ea7..a985a7e87d4 100644 --- a/arch/m68k/emu/nfeth.c +++ b/arch/m68k/emu/nfeth.c @@ -39,7 +39,7 @@ enum { #define MAX_UNIT 8 /* These identify the driver base version and may not be removed. */ -static const char version[] __devinitdata = +static const char version[] __devinitconst = KERN_INFO KBUILD_MODNAME ".c:v" DRV_VERSION " " DRV_RELDATE " S.Opichal, M.Jurik, P.Stehlik\n" KERN_INFO " http://aranym.org/\n"; diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c index 1c05a626054..bf16af1edac 100644 --- a/arch/m68k/hp300/config.c +++ b/arch/m68k/hp300/config.c @@ -24,7 +24,8 @@ unsigned long hp300_model; unsigned long hp300_uart_scode = -1; -unsigned char ledstate; +unsigned char hp300_ledstate; +EXPORT_SYMBOL(hp300_ledstate); static char s_hp330[] __initdata = "330"; static char s_hp340[] __initdata = "340"; diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h index 0392b28656a..c0cb3635077 100644 --- a/arch/m68k/include/asm/atarihw.h +++ b/arch/m68k/include/asm/atarihw.h @@ -30,6 +30,8 @@ extern u_long atari_switches; extern int atari_rtc_year_offset; extern int atari_dont_touch_floppy_select; +extern int atari_SCC_reset_done; + /* convenience macros for testing machine type */ #define MACH_IS_ST ((atari_mch_cookie >> 16) == ATARI_MCH_ST) #define MACH_IS_STE ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \ diff --git a/arch/m68k/include/asm/blinken.h b/arch/m68k/include/asm/blinken.h index 1a749cf7b06..0626582a7db 100644 --- a/arch/m68k/include/asm/blinken.h +++ b/arch/m68k/include/asm/blinken.h @@ -17,15 +17,15 @@ #define HP300_LEDS 0xf001ffff -extern unsigned char ledstate; +extern unsigned char hp300_ledstate; static __inline__ void blinken_leds(int on, int off) { if (MACH_IS_HP300) { - ledstate |= on; - ledstate &= ~off; - out_8(HP300_LEDS, ~ledstate); + hp300_ledstate |= on; + hp300_ledstate &= ~off; + out_8(HP300_LEDS, ~hp300_ledstate); } } diff --git a/arch/m68k/include/asm/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h index c2a042b8c34..a2d32f6589f 100644 --- a/arch/m68k/include/asm/mac_baboon.h +++ b/arch/m68k/include/asm/mac_baboon.h @@ -29,4 +29,10 @@ struct baboon { */ }; +extern int baboon_present; + +extern void baboon_register_interrupts(void); +extern void baboon_irq_enable(int); +extern void baboon_irq_disable(int); + #endif /* __ASSEMBLY **/ diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h index a2c7e6fcca3..fde874a01e2 100644 --- a/arch/m68k/include/asm/mac_iop.h +++ b/arch/m68k/include/asm/mac_iop.h @@ -159,4 +159,6 @@ extern void iop_upload_code(uint, __u8 *, uint, __u16); extern void iop_download_code(uint, __u8 *, uint, __u16); extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16); +extern void iop_register_interrupts(void); + #endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h index 3cf2b6ed685..425fbff4f4d 100644 --- a/arch/m68k/include/asm/mac_oss.h +++ b/arch/m68k/include/asm/mac_oss.h @@ -58,25 +58,6 @@ #define OSS_POWEROFF 0x80 -/* - * OSS Interrupt levels for various sub-systems - * - * This mapping is laid out with two things in mind: first, we try to keep - * things on their own levels to avoid having to do double-dispatches. Second, - * the levels match as closely as possible the alternate IRQ mapping mode (aka - * "A/UX mode") available on some VIA machines. - */ - -#define OSS_IRQLEV_DISABLED 0 -#define OSS_IRQLEV_IOPISM 1 /* ADB? */ -#define OSS_IRQLEV_SCSI IRQ_AUTO_2 -#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 /* keep this on its own level */ -#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_SOUND IRQ_AUTO_5 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_60HZ 6 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 /* matches VIA alternate mapping */ -#define OSS_IRQLEV_PARITY 7 /* matches VIA alternate mapping */ - #ifndef __ASSEMBLY__ struct mac_oss { @@ -91,4 +72,8 @@ struct mac_oss { extern volatile struct mac_oss *oss; extern int oss_present; +extern void oss_register_interrupts(void); +extern void oss_irq_enable(int); +extern void oss_irq_disable(int); + #endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/include/asm/mac_psc.h b/arch/m68k/include/asm/mac_psc.h index 7808bb0b232..e5c0d71d154 100644 --- a/arch/m68k/include/asm/mac_psc.h +++ b/arch/m68k/include/asm/mac_psc.h @@ -211,6 +211,10 @@ extern volatile __u8 *psc; extern int psc_present; +extern void psc_register_interrupts(void); +extern void psc_irq_enable(int); +extern void psc_irq_disable(int); + /* * Access functions */ diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h index a59665e1d41..aeeedf8b2d2 100644 --- a/arch/m68k/include/asm/mac_via.h +++ b/arch/m68k/include/asm/mac_via.h @@ -254,6 +254,15 @@ extern volatile __u8 *via1,*via2; extern int rbv_present,via_alt_mapping; +extern void via_register_interrupts(void); +extern void via_irq_enable(int); +extern void via_irq_disable(int); +extern void via_nubus_irq_startup(int irq); +extern void via_nubus_irq_shutdown(int irq); +extern void via1_irq(unsigned int irq, struct irq_desc *desc); +extern void via1_set_head(int); +extern int via2_scsi_drq_pending(void); + static inline int rbv_set_video_bpp(int bpp) { char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1; diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h index 12ebe43b008..682a1a2ff55 100644 --- a/arch/m68k/include/asm/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h @@ -11,17 +11,11 @@ extern void mac_reset(void); extern void mac_poweroff(void); extern void mac_init_IRQ(void); -extern int mac_irq_pending(unsigned int); + extern void mac_irq_enable(struct irq_data *data); extern void mac_irq_disable(struct irq_data *data); /* - * Floppy driver magic hook - probably shouldn't be here - */ - -extern void via1_set_head(int); - -/* * Macintosh Table */ @@ -48,7 +42,7 @@ struct mac_model #define MAC_ADB_IOP 6 #define MAC_VIA_II 1 -#define MAC_VIA_IIci 2 +#define MAC_VIA_IICI 2 #define MAC_VIA_QUADRA 3 #define MAC_SCSI_NONE 0 diff --git a/arch/m68k/include/asm/macints.h b/arch/m68k/include/asm/macints.h index ebe1b70fe90..92aa8a4c2d0 100644 --- a/arch/m68k/include/asm/macints.h +++ b/arch/m68k/include/asm/macints.h @@ -104,6 +104,9 @@ #define IRQ_PSC4_3 (35) #define IRQ_MAC_MACE_DMA IRQ_PSC4_3 +/* OSS Level 4 interrupts */ +#define IRQ_MAC_SCC (33) + /* Level 5 (PSC, AV Macs only) interrupts */ #define IRQ_PSC5_0 (40) #define IRQ_PSC5_1 (41) @@ -131,9 +134,6 @@ #define IRQ_BABOON_2 (66) #define IRQ_BABOON_3 (67) -/* On non-PSC machines, the serial ports share an IRQ */ -#define IRQ_MAC_SCC IRQ_AUTO_4 - #define SLOT2IRQ(x) (x + 47) #define IRQ2SLOT(x) (x - 47) diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h index 2b90d6e6907..7267536adbc 100644 --- a/arch/m68k/include/asm/serial.h +++ b/arch/m68k/include/asm/serial.h @@ -25,9 +25,11 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif +#ifdef CONFIG_ISA #define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ +#endif diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 303192fc926..ea0b502f845 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -132,10 +132,10 @@ #define __NR_adjtimex 124 #define __NR_mprotect 125 #define __NR_sigprocmask 126 -/*#define __NR_create_module 127*/ +#define __NR_create_module 127 #define __NR_init_module 128 #define __NR_delete_module 129 -/*#define __NR_get_kernel_syms 130*/ +#define __NR_get_kernel_syms 130 #define __NR_quotactl 131 #define __NR_getpgid 132 #define __NR_fchdir 133 @@ -172,7 +172,7 @@ #define __NR_setresuid 164 #define __NR_getresuid 165 #define __NR_getpagesize 166 -/*#define __NR_query_module 167*/ +#define __NR_query_module 167 #define __NR_poll 168 #define __NR_nfsservctl 169 #define __NR_setresgid 170 @@ -193,8 +193,8 @@ #define __NR_capset 185 #define __NR_sigaltstack 186 #define __NR_sendfile 187 -/*#define __NR_getpmsg 188*/ /* some people actually want streams */ -/*#define __NR_putpmsg 189*/ /* some people actually want streams */ +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ #define __NR_vfork 190 #define __NR_ugetrlimit 191 #define __NR_mmap2 192 diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index 27622b3273c..d197e7ff62c 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -250,9 +250,8 @@ * USE_MFP: Use the ST-MFP port (Modem1) for serial debug. * * Macintosh constants: - * MAC_SERIAL_DEBUG: Turns on serial debug output for the Macintosh. - * MAC_USE_SCC_A: Use the SCC port A (modem) for serial debug. - * MAC_USE_SCC_B: Use the SCC port B (printer) for serial debug (default). + * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console. + * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console. */ #include <linux/linkage.h> @@ -268,33 +267,25 @@ #include <asm/machw.h> -/* - * Macintosh console support - */ - #ifdef CONFIG_FRAMEBUFFER_CONSOLE #define CONSOLE #define CONSOLE_PENGUIN #endif -/* - * Macintosh serial debug support; outputs boot info to the printer - * and/or modem serial ports - */ -#undef MAC_SERIAL_DEBUG +#ifdef CONFIG_EARLY_PRINTK +#define SERIAL_DEBUG +#else +#undef SERIAL_DEBUG +#endif -/* - * Macintosh serial debug port selection; define one or both; - * requires MAC_SERIAL_DEBUG to be defined - */ -#define MAC_USE_SCC_A /* Macintosh modem serial port */ -#define MAC_USE_SCC_B /* Macintosh printer serial port */ +#else /* !CONFIG_MAC */ -#endif /* CONFIG_MAC */ +#define SERIAL_DEBUG + +#endif /* !CONFIG_MAC */ #undef MMU_PRINT #undef MMU_NOCACHE_KERNEL -#define SERIAL_DEBUG #undef DEBUG /* @@ -655,11 +646,11 @@ ENTRY(__start) lea %pc@(L(mac_rowbytes)),%a1 movel %a0@,%a1@ -#ifdef MAC_SERIAL_DEBUG +#ifdef SERIAL_DEBUG get_bi_record BI_MAC_SCCBASE lea %pc@(L(mac_sccbase)),%a1 movel %a0@,%a1@ -#endif /* MAC_SERIAL_DEBUG */ +#endif #if 0 /* @@ -1427,7 +1418,7 @@ L(mmu_fixup_done): subl %d0,L(console_font) subl %d0,L(console_font_data) #endif -#ifdef MAC_SERIAL_DEBUG +#ifdef SERIAL_DEBUG orl #0x50000000,L(mac_sccbase) #endif 1: @@ -1917,7 +1908,7 @@ mmu_030_print: jbne 30b mmu_print_done: - puts "\n\n" + puts "\n" func_return mmu_print @@ -2768,7 +2759,7 @@ L(scc_initable_mac): .byte 9,0 /* no interrupts */ .byte 10,0 /* NRZ */ .byte 11,0x50 /* use baud rate generator */ - .byte 12,10,13,0 /* 9600 baud */ + .byte 12,1,13,0 /* 38400 baud */ .byte 14,1 /* Baud rate generator enable */ .byte 3,0xc1 /* enable receiver */ .byte 5,0xea /* enable transmitter */ @@ -2906,10 +2897,12 @@ func_start serial_init,%d0/%d1/%a0/%a1 #endif #ifdef CONFIG_MAC is_not_mac(L(serial_init_not_mac)) -#ifdef MAC_SERIAL_DEBUG -#if !defined(MAC_USE_SCC_A) && !defined(MAC_USE_SCC_B) -#define MAC_USE_SCC_B -#endif + +#ifdef SERIAL_DEBUG +/* You may define either or both of these. */ +#define MAC_USE_SCC_A /* Modem port */ +#define MAC_USE_SCC_B /* Printer port */ + #define mac_scc_cha_b_ctrl_offset 0x0 #define mac_scc_cha_a_ctrl_offset 0x2 #define mac_scc_cha_b_data_offset 0x4 @@ -2940,7 +2933,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 jra 7b 8: #endif /* MAC_USE_SCC_B */ -#endif /* MAC_SERIAL_DEBUG */ +#endif /* SERIAL_DEBUG */ jra L(serial_init_done) L(serial_init_not_mac): @@ -3011,7 +3004,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1 #ifdef CONFIG_MAC is_not_mac(5f) -#ifdef MAC_SERIAL_DEBUG +#ifdef SERIAL_DEBUG #ifdef MAC_USE_SCC_A movel %pc@(L(mac_sccbase)),%a1 @@ -3029,7 +3022,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1 moveb %d0,%a1@(mac_scc_cha_b_data_offset) #endif /* MAC_USE_SCC_B */ -#endif /* MAC_SERIAL_DEBUG */ +#endif /* SERIAL_DEBUG */ jra L(serial_putc_done) 5: @@ -3248,33 +3241,39 @@ func_return putn #ifdef CONFIG_MAC /* - * mac_serial_print + * mac_early_print * * This routine takes its parameters on the stack. It then - * turns around and calls the internal routine. This routine - * is used until the Linux console driver initializes itself. + * turns around and calls the internal routines. This routine + * is used by the boot console. * * The calling parameters are: - * void mac_serial_print(const char *str); + * void mac_early_print(const char *str, unsigned length); * * This routine does NOT understand variable arguments only * simple strings! */ -ENTRY(mac_serial_print) - moveml %d0/%a0,%sp@- -#if 1 - move %sr,%sp@- +ENTRY(mac_early_print) + moveml %d0/%d1/%a0,%sp@- + movew %sr,%sp@- ori #0x0700,%sr -#endif - movel %sp@(10),%a0 /* fetch parameter */ + movel %sp@(18),%a0 /* fetch parameter */ + movel %sp@(22),%d1 /* fetch parameter */ jra 2f -1: serial_putc %d0 -2: moveb %a0@+,%d0 - jne 1b -#if 1 - move %sp@+,%sr +1: +#ifdef CONSOLE + console_putc %d0 #endif - moveml %sp@+,%d0/%a0 +#ifdef SERIAL_DEBUG + serial_putc %d0 +#endif + subq #1,%d1 +2: jeq 3f + moveb %a0@+,%d0 + jne 1b +3: + movew %sp@+,%sr + moveml %sp@+,%d0/%d1/%a0 rts #endif /* CONFIG_MAC */ @@ -3409,10 +3408,10 @@ func_start console_put_stats,%a0/%d7 * a0 = pointer to boot_info * d7 = value of boot_info fields */ - puts "\nMacLinux\n\n" + puts "\nMacLinux\n" #ifdef SERIAL_DEBUG - puts " vidaddr:" + puts "\n vidaddr:" putn %pc@(L(mac_videobase)) /* video addr. */ puts "\n _stext:" @@ -3423,19 +3422,21 @@ func_start console_put_stats,%a0/%d7 lea %pc@(_end),%a0 putn %a0 - puts "\ncpuid:" + puts "\n cpuid:" putn %pc@(L(cputype)) - putc '\n' -#ifdef MAC_SERIAL_DEBUG +# ifdef CONFIG_MAC + puts "\n sccbase:" putn %pc@(L(mac_sccbase)) +# endif +# ifdef MMU_PRINT putc '\n' -#endif -# if defined(MMU_PRINT) jbsr mmu_print_machine_cpu_types -# endif /* MMU_PRINT */ +# endif #endif /* SERIAL_DEBUG */ + putc '\n' + func_return console_put_stats #ifdef CONSOLE_PENGUIN @@ -3896,11 +3897,11 @@ L(mac_dimensions): .long 0 L(mac_rowbytes): .long 0 -#ifdef MAC_SERIAL_DEBUG +#ifdef SERIAL_DEBUG L(mac_sccbase): .long 0 -#endif /* MAC_SERIAL_DEBUG */ #endif +#endif /* CONFIG_MAC */ #if defined (CONFIG_APOLLO) LSRB0 = 0x10412 diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c index b403924a1ca..3fe0e43d44f 100644 --- a/arch/m68k/mac/baboon.c +++ b/arch/m68k/mac/baboon.c @@ -8,13 +8,8 @@ #include <linux/types.h> #include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/init.h> #include <linux/irq.h> -#include <asm/traps.h> -#include <asm/bootinfo.h> #include <asm/macintosh.h> #include <asm/macints.h> #include <asm/mac_baboon.h> @@ -23,7 +18,6 @@ int baboon_present; static volatile struct baboon *baboon; -static unsigned char baboon_disabled; #if 0 extern int macide_ack_intr(struct ata_channel *); @@ -89,51 +83,32 @@ static void baboon_irq(unsigned int irq, struct irq_desc *desc) void __init baboon_register_interrupts(void) { - baboon_disabled = 0; irq_set_chained_handler(IRQ_NUBUS_C, baboon_irq); } /* - * The means for masking individual baboon interrupts remains a mystery, so - * enable the umbrella interrupt only when no baboon interrupt is disabled. + * The means for masking individual Baboon interrupts remains a mystery. + * However, since we only use the IDE IRQ, we can just enable/disable all + * Baboon interrupts. If/when we handle more than one Baboon IRQ, we must + * either figure out how to mask them individually or else implement the + * same workaround that's used for NuBus slots (see nubus_disabled and + * via_nubus_irq_shutdown). */ void baboon_irq_enable(int irq) { - int irq_idx = IRQ_IDX(irq); - #ifdef DEBUG_IRQUSE printk("baboon_irq_enable(%d)\n", irq); #endif - baboon_disabled &= ~(1 << irq_idx); - if (!baboon_disabled) - mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); + mac_irq_enable(irq_get_irq_data(IRQ_NUBUS_C)); } void baboon_irq_disable(int irq) { - int irq_idx = IRQ_IDX(irq); - #ifdef DEBUG_IRQUSE printk("baboon_irq_disable(%d)\n", irq); #endif - baboon_disabled |= 1 << irq_idx; - if (baboon_disabled) - mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); -} - -void baboon_irq_clear(int irq) -{ - int irq_idx = IRQ_IDX(irq); - - baboon->mb_ifr &= ~(1 << irq_idx); -} - -int baboon_irq_pending(int irq) -{ - int irq_idx = IRQ_IDX(irq); - - return baboon->mb_ifr & (1 << irq_idx); + mac_irq_disable(irq_get_irq_data(IRQ_NUBUS_C)); } diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index c247de02bc7..f60ff5f5920 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -71,6 +71,31 @@ static void mac_get_model(char *str); static void mac_identify(void); static void mac_report_hardware(void); +#ifdef CONFIG_EARLY_PRINTK +asmlinkage void __init mac_early_print(const char *s, unsigned n); + +static void __init mac_early_cons_write(struct console *con, + const char *s, unsigned n) +{ + mac_early_print(s, n); +} + +static struct console __initdata mac_early_cons = { + .name = "early", + .write = mac_early_cons_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + +int __init mac_unregister_early_cons(void) +{ + /* mac_early_print can't be used after init sections are discarded */ + return unregister_console(&mac_early_cons); +} + +late_initcall(mac_unregister_early_cons); +#endif + static void __init mac_sched_init(irq_handler_t vector) { via_init_clock(vector); @@ -164,6 +189,10 @@ void __init config_mac(void) mach_beep = mac_mksound; #endif +#ifdef CONFIG_EARLY_PRINTK + register_console(&mac_early_cons); +#endif + /* * Determine hardware present */ @@ -192,7 +221,7 @@ void __init config_mac(void) * inaccurate, so look here if a new Mac model won't run. Example: if * a Mac crashes immediately after the VIA1 registers have been dumped * to the screen, it probably died attempting to read DirB on a RBV. - * Meaning it should have MAC_VIA_IIci here :-) + * Meaning it should have MAC_VIA_IICI here :-) */ struct mac_model *macintosh_config; @@ -267,7 +296,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IICI, .name = "IIci", .adb_type = MAC_ADB_II, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -276,7 +305,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIFX, .name = "IIfx", .adb_type = MAC_ADB_IOP, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_IOP, .nubus_type = MAC_NUBUS, @@ -285,7 +314,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IISI, .name = "IIsi", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -294,7 +323,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIVI, .name = "IIvi", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -303,7 +332,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_IIVX, .name = "IIvx", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -318,7 +347,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CLII, .name = "Classic II", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -327,7 +356,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CCL, .name = "Color Classic", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -336,7 +365,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_CCLII, .name = "Color Classic II", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -351,7 +380,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LC, .name = "LC", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -360,7 +389,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LCII, .name = "LC II", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -369,7 +398,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_LCIII, .name = "LC III", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -497,7 +526,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P460, .name = "Performa 460", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -524,7 +553,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P520, .name = "Performa 520", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -533,7 +562,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P550, .name = "Performa 550", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -565,7 +594,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_TV, .name = "TV", .adb_type = MAC_ADB_CUDA, - .via_type = MAC_VIA_QUADRA, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -574,7 +603,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_P600, .name = "Performa 600", .adb_type = MAC_ADB_IISI, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, .nubus_type = MAC_NUBUS, @@ -645,8 +674,8 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_PB150, .name = "PowerBook 150", - .adb_type = MAC_ADB_PB1, - .via_type = MAC_VIA_IIci, + .adb_type = MAC_ADB_PB2, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .ide_type = MAC_IDE_PB, .scc_type = MAC_SCC_QUADRA, @@ -732,17 +761,13 @@ static struct mac_model mac_data_table[] = { * PowerBook Duos are pretty much like normal PowerBooks * All of these probably have onboard SONIC in the Dock which * means we'll have to probe for it eventually. - * - * Are these really MAC_VIA_IIci? The developer notes for the - * Duos show pretty much the same custom parts as in most of - * the other PowerBooks which would imply MAC_VIA_QUADRA. */ { .ident = MAC_MODEL_PB210, .name = "PowerBook Duo 210", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -751,7 +776,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB230, .name = "PowerBook Duo 230", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -760,7 +785,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB250, .name = "PowerBook Duo 250", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -769,7 +794,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB270C, .name = "PowerBook Duo 270c", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -778,7 +803,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB280, .name = "PowerBook Duo 280", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -787,7 +812,7 @@ static struct mac_model mac_data_table[] = { .ident = MAC_MODEL_PB280C, .name = "PowerBook Duo 280c", .adb_type = MAC_ADB_PB2, - .via_type = MAC_VIA_IIci, + .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_QUADRA, .nubus_type = MAC_NUBUS, @@ -864,8 +889,14 @@ static void __init mac_identify(void) scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC_B; break; default: - scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC; - scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC; + /* On non-PSC machines, the serial ports share an IRQ. */ + if (macintosh_config->ident == MAC_MODEL_IIFX) { + scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_MAC_SCC; + scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_MAC_SCC; + } else { + scc_a_rsrcs[1].start = scc_a_rsrcs[1].end = IRQ_AUTO_4; + scc_b_rsrcs[1].start = scc_b_rsrcs[1].end = IRQ_AUTO_4; + } break; } diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c index a5462cc0bfd..7d8d46127ad 100644 --- a/arch/m68k/mac/iop.c +++ b/arch/m68k/mac/iop.c @@ -115,7 +115,6 @@ #include <asm/macintosh.h> #include <asm/macints.h> #include <asm/mac_iop.h> -#include <asm/mac_oss.h> /*#define DEBUG_IOP*/ @@ -149,8 +148,6 @@ static struct listener iop_listeners[NUM_IOPS][NUM_IOP_CHAN]; irqreturn_t iop_ism_irq(int, void *); -extern void oss_irq_enable(int); - /* * Private access functions */ @@ -304,11 +301,10 @@ void __init iop_init(void) void __init iop_register_interrupts(void) { if (iop_ism_present) { - if (oss_present) { - if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq, 0, + if (macintosh_config->ident == MAC_MODEL_IIFX) { + if (request_irq(IRQ_MAC_ADB, iop_ism_irq, 0, "ISM IOP", (void *)IOP_NUM_ISM)) pr_err("Couldn't register ISM IOP interrupt\n"); - oss_irq_enable(IRQ_MAC_ADB); } else { if (request_irq(IRQ_VIA2_0, iop_ism_irq, 0, "ISM IOP", (void *)IOP_NUM_ISM)) diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index ba220b70ab8..5c1a6b2ff0a 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -26,10 +26,6 @@ * - slot 6: timer 1 (not on IIci) * - slot 7: status of IRQ; signals 'any enabled int.' * - * 2 - OSS (IIfx only?) - * - slot 0: SCSI interrupt - * - slot 1: Sound interrupt - * * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes: * * 3 - unused (?) @@ -42,21 +38,30 @@ * * 6 - off switch (?) * - * For OSS Macintoshes (IIfx only at this point): + * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support + * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and + * sound out to their own autovector IRQs and gives VIA1 a higher priority: * - * 3 - Nubus interrupt - * - slot 0: Slot $9 - * - slot 1: Slot $A - * - slot 2: Slot $B - * - slot 3: Slot $C - * - slot 4: Slot $D - * - slot 5: Slot $E + * 1 - unused (?) * - * 4 - SCC IOP + * 3 - on-board SONIC + * + * 5 - Apple Sound Chip (ASC) + * + * 6 - VIA1 + * + * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to + * the Quadra (A/UX) mapping: + * + * 1 - ISM IOP (ADB) * - * 5 - ISM IOP (ADB?) + * 2 - SCSI * - * 6 - unused + * 3 - NuBus + * + * 4 - SCC IOP + * + * 6 - VIA1 * * For PSC Macintoshes (660AV, 840AV): * @@ -100,88 +105,29 @@ * case. They're hidden behind the Nubus slot $C interrupt thus adding a * third layer of indirection. Why oh why did the Apple engineers do that? * - * - We support "fast" and "slow" handlers, just like the Amiga port. The - * fast handlers are called first and with all interrupts disabled. They - * are expected to execute quickly (hence the name). The slow handlers are - * called last with interrupts enabled and the interrupt level restored. - * They must therefore be reentrant. - * - * TODO: - * */ -#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/interrupt.h> /* for intr_count */ +#include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/delay.h> -#include <linux/seq_file.h> -#include <asm/system.h> #include <asm/irq.h> -#include <asm/traps.h> -#include <asm/bootinfo.h> #include <asm/macintosh.h> +#include <asm/macints.h> #include <asm/mac_via.h> #include <asm/mac_psc.h> +#include <asm/mac_oss.h> +#include <asm/mac_iop.h> +#include <asm/mac_baboon.h> #include <asm/hwtest.h> -#include <asm/errno.h> -#include <asm/macints.h> #include <asm/irq_regs.h> -#include <asm/mac_oss.h> #define SHUTUP_SONIC /* - * VIA/RBV hooks - */ - -extern void via_register_interrupts(void); -extern void via_irq_enable(int); -extern void via_irq_disable(int); -extern void via_irq_clear(int); -extern int via_irq_pending(int); - -/* - * OSS hooks - */ - -extern void oss_register_interrupts(void); -extern void oss_irq_enable(int); -extern void oss_irq_disable(int); -extern void oss_irq_clear(int); -extern int oss_irq_pending(int); - -/* - * PSC hooks - */ - -extern void psc_register_interrupts(void); -extern void psc_irq_enable(int); -extern void psc_irq_disable(int); -extern void psc_irq_clear(int); -extern int psc_irq_pending(int); - -/* - * IOP hooks - */ - -extern void iop_register_interrupts(void); - -/* - * Baboon hooks - */ - -extern int baboon_present; - -extern void baboon_register_interrupts(void); -extern void baboon_irq_enable(int); -extern void baboon_irq_disable(int); -extern void baboon_irq_clear(int); - -/* * console_loglevel determines NMI handler function */ @@ -190,10 +136,15 @@ irqreturn_t mac_debug_handler(int, void *); /* #define DEBUG_MACINTS */ +static unsigned int mac_irq_startup(struct irq_data *); +static void mac_irq_shutdown(struct irq_data *); + static struct irq_chip mac_irq_chip = { .name = "mac", .irq_enable = mac_irq_enable, .irq_disable = mac_irq_disable, + .irq_startup = mac_irq_startup, + .irq_shutdown = mac_irq_shutdown, }; void __init mac_init_IRQ(void) @@ -239,8 +190,6 @@ void __init mac_init_IRQ(void) /* * mac_irq_enable - enable an interrupt source * mac_irq_disable - disable an interrupt source - * mac_clear_irq - clears a pending interrupt - * mac_irq_pending - returns the pending status of an IRQ (nonzero = pending) * * These routines are just dispatchers to the VIA/OSS/PSC routines. */ @@ -252,8 +201,6 @@ void mac_irq_enable(struct irq_data *data) switch(irq_src) { case 1: - via_irq_enable(irq); - break; case 2: case 7: if (oss_present) @@ -262,6 +209,7 @@ void mac_irq_enable(struct irq_data *data) via_irq_enable(irq); break; case 3: + case 4: case 5: case 6: if (psc_present) @@ -269,10 +217,6 @@ void mac_irq_enable(struct irq_data *data) else if (oss_present) oss_irq_enable(irq); break; - case 4: - if (psc_present) - psc_irq_enable(irq); - break; case 8: if (baboon_present) baboon_irq_enable(irq); @@ -287,8 +231,6 @@ void mac_irq_disable(struct irq_data *data) switch(irq_src) { case 1: - via_irq_disable(irq); - break; case 2: case 7: if (oss_present) @@ -297,6 +239,7 @@ void mac_irq_disable(struct irq_data *data) via_irq_disable(irq); break; case 3: + case 4: case 5: case 6: if (psc_present) @@ -304,10 +247,6 @@ void mac_irq_disable(struct irq_data *data) else if (oss_present) oss_irq_disable(irq); break; - case 4: - if (psc_present) - psc_irq_disable(irq); - break; case 8: if (baboon_present) baboon_irq_disable(irq); @@ -315,65 +254,27 @@ void mac_irq_disable(struct irq_data *data) } } -void mac_clear_irq(unsigned int irq) +static unsigned int mac_irq_startup(struct irq_data *data) { - switch(IRQ_SRC(irq)) { - case 1: - via_irq_clear(irq); - break; - case 2: - case 7: - if (oss_present) - oss_irq_clear(irq); - else - via_irq_clear(irq); - break; - case 3: - case 5: - case 6: - if (psc_present) - psc_irq_clear(irq); - else if (oss_present) - oss_irq_clear(irq); - break; - case 4: - if (psc_present) - psc_irq_clear(irq); - break; - case 8: - if (baboon_present) - baboon_irq_clear(irq); - break; - } + int irq = data->irq; + + if (IRQ_SRC(irq) == 7 && !oss_present) + via_nubus_irq_startup(irq); + else + mac_irq_enable(data); + + return 0; } -int mac_irq_pending(unsigned int irq) +static void mac_irq_shutdown(struct irq_data *data) { - switch(IRQ_SRC(irq)) { - case 1: - return via_irq_pending(irq); - case 2: - case 7: - if (oss_present) - return oss_irq_pending(irq); - else - return via_irq_pending(irq); - case 3: - case 5: - case 6: - if (psc_present) - return psc_irq_pending(irq); - else if (oss_present) - return oss_irq_pending(irq); - break; - case 4: - if (psc_present) - return psc_irq_pending(irq); - break; - } - return 0; + int irq = data->irq; + + if (IRQ_SRC(irq) == 7 && !oss_present) + via_nubus_irq_shutdown(irq); + else + mac_irq_disable(data); } -EXPORT_SYMBOL(mac_irq_pending); static int num_debug[8]; diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c index a4c82dab9ff..6c4c882c126 100644 --- a/arch/m68k/mac/oss.c +++ b/arch/m68k/mac/oss.c @@ -1,5 +1,5 @@ /* - * OSS handling + * Operating System Services (OSS) chip handling * Written by Joshua M. Thompson (funaho@jurai.org) * * @@ -30,8 +30,6 @@ int oss_present; volatile struct mac_oss *oss; -extern void via1_irq(unsigned int irq, struct irq_desc *desc); - /* * Initialize the OSS * @@ -51,10 +49,8 @@ void __init oss_init(void) /* do this by setting the source's interrupt level to zero. */ for (i = 0; i <= OSS_NUM_SOURCES; i++) { - oss->irq_level[i] = OSS_IRQLEV_DISABLED; + oss->irq_level[i] = 0; } - /* If we disable VIA1 here, we never really handle it... */ - oss->irq_level[OSS_VIA1] = OSS_IRQLEV_VIA1; } /* @@ -66,17 +62,13 @@ void __init oss_nubus_init(void) } /* - * Handle miscellaneous OSS interrupts. Right now that's just sound - * and SCSI; everything else is routed to its own autovector IRQ. + * Handle miscellaneous OSS interrupts. */ static void oss_irq(unsigned int irq, struct irq_desc *desc) { - int events; - - events = oss->irq_pending & (OSS_IP_SOUND|OSS_IP_SCSI); - if (!events) - return; + int events = oss->irq_pending & + (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM); #ifdef DEBUG_IRQS if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { @@ -84,16 +76,20 @@ static void oss_irq(unsigned int irq, struct irq_desc *desc) (int) oss->irq_pending); } #endif - /* FIXME: how do you clear a pending IRQ? */ - if (events & OSS_IP_SOUND) { - oss->irq_pending &= ~OSS_IP_SOUND; - /* FIXME: call sound handler */ - } else if (events & OSS_IP_SCSI) { + if (events & OSS_IP_IOPSCC) { + oss->irq_pending &= ~OSS_IP_IOPSCC; + generic_handle_irq(IRQ_MAC_SCC); + } + + if (events & OSS_IP_SCSI) { oss->irq_pending &= ~OSS_IP_SCSI; generic_handle_irq(IRQ_MAC_SCSI); - } else { - /* FIXME: error check here? */ + } + + if (events & OSS_IP_IOPISM) { + oss->irq_pending &= ~OSS_IP_IOPISM; + generic_handle_irq(IRQ_MAC_ADB); } } @@ -132,14 +128,29 @@ static void oss_nubus_irq(unsigned int irq, struct irq_desc *desc) /* * Register the OSS and NuBus interrupt dispatchers. + * + * This IRQ mapping is laid out with two things in mind: first, we try to keep + * things on their own levels to avoid having to do double-dispatches. Second, + * the levels match as closely as possible the alternate IRQ mapping mode (aka + * "A/UX mode") available on some VIA machines. */ +#define OSS_IRQLEV_IOPISM IRQ_AUTO_1 +#define OSS_IRQLEV_SCSI IRQ_AUTO_2 +#define OSS_IRQLEV_NUBUS IRQ_AUTO_3 +#define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 +#define OSS_IRQLEV_VIA1 IRQ_AUTO_6 + void __init oss_register_interrupts(void) { - irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); - irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); - irq_set_chained_handler(OSS_IRQLEV_SOUND, oss_irq); - irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); + irq_set_chained_handler(OSS_IRQLEV_IOPISM, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); + irq_set_chained_handler(OSS_IRQLEV_IOPSCC, oss_irq); + irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); + + /* OSS_VIA1 gets enabled here because it has no machspec interrupt. */ + oss->irq_level[OSS_VIA1] = IRQ_AUTO_6; } /* @@ -158,13 +169,13 @@ void oss_irq_enable(int irq) { switch(irq) { case IRQ_MAC_SCC: oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC; - break; + return; case IRQ_MAC_ADB: oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM; - break; + return; case IRQ_MAC_SCSI: oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI; - break; + return; case IRQ_NUBUS_9: case IRQ_NUBUS_A: case IRQ_NUBUS_B: @@ -173,13 +184,11 @@ void oss_irq_enable(int irq) { case IRQ_NUBUS_E: irq -= NUBUS_SOURCE_BASE; oss->irq_level[irq] = OSS_IRQLEV_NUBUS; - break; -#ifdef DEBUG_IRQUSE - default: - printk("%s unknown irq %d\n", __func__, irq); - break; -#endif + return; } + + if (IRQ_SRC(irq) == 1) + via_irq_enable(irq); } /* @@ -195,50 +204,14 @@ void oss_irq_disable(int irq) { #endif switch(irq) { case IRQ_MAC_SCC: - oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_DISABLED; - break; - case IRQ_MAC_ADB: - oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_DISABLED; - break; - case IRQ_MAC_SCSI: - oss->irq_level[OSS_SCSI] = OSS_IRQLEV_DISABLED; - break; - case IRQ_NUBUS_9: - case IRQ_NUBUS_A: - case IRQ_NUBUS_B: - case IRQ_NUBUS_C: - case IRQ_NUBUS_D: - case IRQ_NUBUS_E: - irq -= NUBUS_SOURCE_BASE; - oss->irq_level[irq] = OSS_IRQLEV_DISABLED; - break; -#ifdef DEBUG_IRQUSE - default: - printk("%s unknown irq %d\n", __func__, irq); - break; -#endif - } -} - -/* - * Clear an OSS interrupt - * - * Not sure if this works or not but it's the only method I could - * think of based on the contents of the mac_oss structure. - */ - -void oss_irq_clear(int irq) { - /* FIXME: how to do this on OSS? */ - switch(irq) { - case IRQ_MAC_SCC: - oss->irq_pending &= ~OSS_IP_IOPSCC; - break; + oss->irq_level[OSS_IOPSCC] = 0; + return; case IRQ_MAC_ADB: - oss->irq_pending &= ~OSS_IP_IOPISM; - break; + oss->irq_level[OSS_IOPISM] = 0; + return; case IRQ_MAC_SCSI: - oss->irq_pending &= ~OSS_IP_SCSI; - break; + oss->irq_level[OSS_SCSI] = 0; + return; case IRQ_NUBUS_9: case IRQ_NUBUS_A: case IRQ_NUBUS_B: @@ -246,36 +219,10 @@ void oss_irq_clear(int irq) { case IRQ_NUBUS_D: case IRQ_NUBUS_E: irq -= NUBUS_SOURCE_BASE; - oss->irq_pending &= ~(1 << irq); - break; + oss->irq_level[irq] = 0; + return; } -} - -/* - * Check to see if a specific OSS interrupt is pending - */ -int oss_irq_pending(int irq) -{ - switch(irq) { - case IRQ_MAC_SCC: - return oss->irq_pending & OSS_IP_IOPSCC; - break; - case IRQ_MAC_ADB: - return oss->irq_pending & OSS_IP_IOPISM; - break; - case IRQ_MAC_SCSI: - return oss->irq_pending & OSS_IP_SCSI; - break; - case IRQ_NUBUS_9: - case IRQ_NUBUS_A: - case IRQ_NUBUS_B: - case IRQ_NUBUS_C: - case IRQ_NUBUS_D: - case IRQ_NUBUS_E: - irq -= NUBUS_SOURCE_BASE; - return oss->irq_pending & (1 << irq); - break; - } - return 0; + if (IRQ_SRC(irq) == 1) + via_irq_disable(irq); } diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c index e6c2d20f328..6f026fc302f 100644 --- a/arch/m68k/mac/psc.c +++ b/arch/m68k/mac/psc.c @@ -180,20 +180,3 @@ void psc_irq_disable(int irq) { #endif psc_write_byte(pIER, 1 << irq_idx); } - -void psc_irq_clear(int irq) { - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int pIFR = pIERbase + (irq_src << 4); - - psc_write_byte(pIFR, 1 << irq_idx); -} - -int psc_irq_pending(int irq) -{ - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int pIFR = pIERbase + (irq_src << 4); - - return psc_read_byte(pIFR) & (1 << irq_idx); -} diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c index f1600ad2662..2d85662715f 100644 --- a/arch/m68k/mac/via.c +++ b/arch/m68k/mac/via.c @@ -63,24 +63,50 @@ static int gIER,gIFR,gBufA,gBufB; #define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF) #define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8) -/* To disable a NuBus slot on Quadras we make that slot IRQ line an output set - * high. On RBV we just use the slot interrupt enable register. On Macs with - * genuine VIA chips we must use nubus_disabled to keep track of disabled slot - * interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1 - * or "SLOTS" interrupt. When no slot is disabled, we unmask the CA1 interrupt. - * So, on genuine VIAs, having more than one NuBus IRQ can mean trouble, - * because closing one of those drivers can mask all of the NuBus interrupts. - * Also, since we can't mask the unregistered slot IRQs on genuine VIAs, it's - * possible to get interrupts from cards that MacOS or the ROM has configured - * but we have not. FWIW, "Designing Cards and Drivers for Macintosh II and - * Macintosh SE", page 9-8, says, a slot IRQ with no driver would crash MacOS. + +/* + * On Macs with a genuine VIA chip there is no way to mask an individual slot + * interrupt. This limitation also seems to apply to VIA clone logic cores in + * Quadra-like ASICs. (RBV and OSS machines don't have this limitation.) + * + * We used to fake it by configuring the relevent VIA pin as an output + * (to mask the interrupt) or input (to unmask). That scheme did not work on + * (at least) the Quadra 700. A NuBus card's /NMRQ signal is an open-collector + * circuit (see Designing Cards and Drivers for Macintosh II and Macintosh SE, + * p. 10-11 etc) but VIA outputs are not (see datasheet). + * + * Driving these outputs high must cause the VIA to source current and the + * card to sink current when it asserts /NMRQ. Current will flow but the pin + * voltage is uncertain and so the /NMRQ condition may still cause a transition + * at the VIA2 CA1 input (which explains the lost interrupts). A side effect + * is that a disabled slot IRQ can never be tested as pending or not. + * + * Driving these outputs low doesn't work either. All the slot /NMRQ lines are + * (active low) OR'd together to generate the CA1 (aka "SLOTS") interrupt (see + * The Guide To Macintosh Family Hardware, 2nd edition p. 167). If we drive a + * disabled /NMRQ line low, the falling edge immediately triggers a CA1 + * interrupt and all slot interrupts after that will generate no transition + * and therefore no interrupt, even after being re-enabled. + * + * So we make the VIA port A I/O lines inputs and use nubus_disabled to keep + * track of their states. When any slot IRQ becomes disabled we mask the CA1 + * umbrella interrupt. Only when all slot IRQs become enabled do we unmask + * the CA1 interrupt. It must remain enabled even when cards have no interrupt + * handler registered. Drivers must therefore disable a slot interrupt at the + * device before they call free_irq (like shared and autovector interrupts). + * + * There is also a related problem when MacOS is used to boot Linux. A network + * card brought up by a MacOS driver may raise an interrupt while Linux boots. + * This can be fatal since it can't be handled until the right driver loads + * (if such a driver exists at all). Apparently related to this hardware + * limitation, "Designing Cards and Drivers", p. 9-8, says that a slot + * interrupt with no driver would crash MacOS (the book was written before + * the appearance of Macs with RBV or OSS). */ + static u8 nubus_disabled; void via_debug_dump(void); -void via_irq_enable(int irq); -void via_irq_disable(int irq); -void via_irq_clear(int irq); /* * Initialize the VIAs @@ -100,7 +126,7 @@ void __init via_init(void) /* IIci, IIsi, IIvx, IIvi (P6xx), LC series */ - case MAC_VIA_IIci: + case MAC_VIA_IICI: via1 = (void *) VIA1_BASE; if (macintosh_config->ident == MAC_MODEL_IIFX) { via2 = NULL; @@ -197,38 +223,17 @@ void __init via_init(void) if (oss_present) return; - /* Some machines support an alternate IRQ mapping that spreads */ - /* Ethernet and Sound out to their own autolevel IRQs and moves */ - /* VIA1 to level 6. A/UX uses this mapping and we do too. Note */ - /* that the IIfx emulates this alternate mapping using the OSS. */ - - via_alt_mapping = 0; - if (macintosh_config->via_type == MAC_VIA_QUADRA) - switch (macintosh_config->ident) { - case MAC_MODEL_C660: - case MAC_MODEL_Q840: - /* not applicable */ - break; - case MAC_MODEL_P588: - case MAC_MODEL_TV: - case MAC_MODEL_PB140: - case MAC_MODEL_PB145: - case MAC_MODEL_PB160: - case MAC_MODEL_PB165: - case MAC_MODEL_PB165C: - case MAC_MODEL_PB170: - case MAC_MODEL_PB180: - case MAC_MODEL_PB180C: - case MAC_MODEL_PB190: - case MAC_MODEL_PB520: - /* not yet tested */ - break; - default: - via_alt_mapping = 1; - via1[vDirB] |= 0x40; - via1[vBufB] &= ~0x40; - break; - } + if ((macintosh_config->via_type == MAC_VIA_QUADRA) && + (macintosh_config->adb_type != MAC_ADB_PB1) && + (macintosh_config->adb_type != MAC_ADB_PB2) && + (macintosh_config->ident != MAC_MODEL_C660) && + (macintosh_config->ident != MAC_MODEL_Q840)) { + via_alt_mapping = 1; + via1[vDirB] |= 0x40; + via1[vBufB] &= ~0x40; + } else { + via_alt_mapping = 0; + } /* * Now initialize VIA2. For RBV we just kill all interrupts; @@ -248,22 +253,28 @@ void __init via_init(void) via2[vACR] &= ~0x03; /* disable port A & B latches */ } + /* Everything below this point is VIA2 only... */ + + if (rbv_present) + return; + /* - * Set vPCR for control line interrupts (but not on RBV) + * Set vPCR for control line interrupts. + * + * CA1 (SLOTS IRQ), CB1 (ASC IRQ): negative edge trigger. + * + * Macs with ESP SCSI have a negative edge triggered SCSI interrupt. + * Testing reveals that PowerBooks do too. However, the SE/30 + * schematic diagram shows an active high NCR5380 IRQ line. */ - if (!rbv_present) { - /* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ) - * are made negative edge triggered here. - */ - if (macintosh_config->scsi_type == MAC_SCSI_OLD) { - /* CB2 (IRQ) indep. input, positive edge */ - /* CA2 (DRQ) indep. input, positive edge */ - via2[vPCR] = 0x66; - } else { - /* CB2 (IRQ) indep. input, negative edge */ - /* CA2 (DRQ) indep. input, negative edge */ - via2[vPCR] = 0x22; - } + + pr_debug("VIA2 vPCR is 0x%02X\n", via2[vPCR]); + if (macintosh_config->via_type == MAC_VIA_II) { + /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, pos. edge */ + via2[vPCR] = 0x66; + } else { + /* CA2 (SCSI DRQ), CB2 (SCSI IRQ): indep. input, neg. edge */ + via2[vPCR] = 0x22; } } @@ -378,34 +389,55 @@ void __init via_nubus_init(void) via2[gBufB] |= 0x02; } - /* Disable all the slot interrupts (where possible). */ + /* + * Disable the slot interrupts. On some hardware that's not possible. + * On some hardware it's unclear what all of these I/O lines do. + */ switch (macintosh_config->via_type) { case MAC_VIA_II: - /* Just make the port A lines inputs. */ - switch(macintosh_config->ident) { - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_SE30: - /* The top two bits are RAM size outputs. */ - via2[vDirA] &= 0xC0; - break; - default: - via2[vDirA] &= 0x80; - } + case MAC_VIA_QUADRA: + pr_debug("VIA2 vDirA is 0x%02X\n", via2[vDirA]); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: /* RBV. Disable all the slot interrupts. SIER works like IER. */ via2[rSIER] = 0x7F; break; + } +} + +void via_nubus_irq_startup(int irq) +{ + int irq_idx = IRQ_IDX(irq); + + switch (macintosh_config->via_type) { + case MAC_VIA_II: case MAC_VIA_QUADRA: - /* Disable the inactive slot interrupts by making those lines outputs. */ - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) { - via2[vBufA] |= 0x7F; - via2[vDirA] |= 0x7F; + /* Make the port A line an input. Probably redundant. */ + if (macintosh_config->via_type == MAC_VIA_II) { + /* The top two bits are RAM size outputs. */ + via2[vDirA] &= 0xC0 | ~(1 << irq_idx); + } else { + /* Allow NuBus slots 9 through F. */ + via2[vDirA] &= 0x80 | ~(1 << irq_idx); } + /* fall through */ + case MAC_VIA_IICI: + via_irq_enable(irq); + break; + } +} + +void via_nubus_irq_shutdown(int irq) +{ + switch (macintosh_config->via_type) { + case MAC_VIA_II: + case MAC_VIA_QUADRA: + /* Ensure that the umbrella CA1 interrupt remains enabled. */ + via_irq_enable(irq); + break; + case MAC_VIA_IICI: + via_irq_disable(irq); break; } } @@ -531,25 +563,18 @@ void via_irq_enable(int irq) { } else if (irq_src == 7) { switch (macintosh_config->via_type) { case MAC_VIA_II: + case MAC_VIA_QUADRA: nubus_disabled &= ~(1 << irq_idx); /* Enable the CA1 interrupt when no slot is disabled. */ if (!nubus_disabled) via2[gIER] = IER_SET_BIT(1); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: /* On RBV, enable the slot interrupt. * SIER works like IER. */ via2[rSIER] = IER_SET_BIT(irq_idx); break; - case MAC_VIA_QUADRA: - /* Make the port A line an input to enable the slot irq. - * But not on PowerBooks, that's ADB. - */ - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) - via2[vDirA] &= ~(1 << irq_idx); - break; } } } @@ -569,60 +594,18 @@ void via_irq_disable(int irq) { } else if (irq_src == 7) { switch (macintosh_config->via_type) { case MAC_VIA_II: + case MAC_VIA_QUADRA: nubus_disabled |= 1 << irq_idx; if (nubus_disabled) via2[gIER] = IER_CLR_BIT(1); break; - case MAC_VIA_IIci: + case MAC_VIA_IICI: via2[rSIER] = IER_CLR_BIT(irq_idx); break; - case MAC_VIA_QUADRA: - if ((macintosh_config->adb_type != MAC_ADB_PB1) && - (macintosh_config->adb_type != MAC_ADB_PB2)) - via2[vDirA] |= 1 << irq_idx; - break; } } } -void via_irq_clear(int irq) { - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int irq_bit = 1 << irq_idx; - - if (irq_src == 1) { - via1[vIFR] = irq_bit; - } else if (irq_src == 2) { - via2[gIFR] = irq_bit | rbv_clear; - } else if (irq_src == 7) { - /* FIXME: There is no way to clear an individual nubus slot - * IRQ flag, other than getting the device to do it. - */ - } -} - -/* - * Returns nonzero if an interrupt is pending on the given - * VIA/IRQ combination. - */ - -int via_irq_pending(int irq) -{ - int irq_src = IRQ_SRC(irq); - int irq_idx = IRQ_IDX(irq); - int irq_bit = 1 << irq_idx; - - if (irq_src == 1) { - return via1[vIFR] & irq_bit; - } else if (irq_src == 2) { - return via2[gIFR] & irq_bit; - } else if (irq_src == 7) { - /* Always 0 for MAC_VIA_QUADRA if the slot irq is disabled. */ - return ~via2[gBufA] & irq_bit; - } - return 0; -} - void via1_set_head(int head) { if (head == 0) @@ -631,3 +614,9 @@ void via1_set_head(int head) via1[vBufA] |= VIA1A_vHeadSel; } EXPORT_SYMBOL(via1_set_head); + +int via2_scsi_drq_pending(void) +{ + return via2[gIFR] & (1 << IRQ_IDX(IRQ_MAC_SCSIDRQ)); +} +EXPORT_SYMBOL(via2_scsi_drq_pending); diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c index 31a66d99cbc..c3fb3bdd7ed 100644 --- a/arch/m68k/mvme16x/config.c +++ b/arch/m68k/mvme16x/config.c @@ -124,6 +124,163 @@ static void __init mvme16x_init_IRQ (void) #define PccSCCMICR 0x1d #define PccSCCTICR 0x1e #define PccSCCRICR 0x1f +#define PccTPIACKR 0x25 + +#ifdef CONFIG_EARLY_PRINTK + +/**** cd2401 registers ****/ +#define CD2401_ADDR (0xfff45000) + +#define CyGFRCR (0x81) +#define CyCCR (0x13) +#define CyCLR_CHAN (0x40) +#define CyINIT_CHAN (0x20) +#define CyCHIP_RESET (0x10) +#define CyENB_XMTR (0x08) +#define CyDIS_XMTR (0x04) +#define CyENB_RCVR (0x02) +#define CyDIS_RCVR (0x01) +#define CyCAR (0xee) +#define CyIER (0x11) +#define CyMdmCh (0x80) +#define CyRxExc (0x20) +#define CyRxData (0x08) +#define CyTxMpty (0x02) +#define CyTxRdy (0x01) +#define CyLICR (0x26) +#define CyRISR (0x89) +#define CyTIMEOUT (0x80) +#define CySPECHAR (0x70) +#define CyOVERRUN (0x08) +#define CyPARITY (0x04) +#define CyFRAME (0x02) +#define CyBREAK (0x01) +#define CyREOIR (0x84) +#define CyTEOIR (0x85) +#define CyMEOIR (0x86) +#define CyNOTRANS (0x08) +#define CyRFOC (0x30) +#define CyRDR (0xf8) +#define CyTDR (0xf8) +#define CyMISR (0x8b) +#define CyRISR (0x89) +#define CyTISR (0x8a) +#define CyMSVR1 (0xde) +#define CyMSVR2 (0xdf) +#define CyDSR (0x80) +#define CyDCD (0x40) +#define CyCTS (0x20) +#define CyDTR (0x02) +#define CyRTS (0x01) +#define CyRTPRL (0x25) +#define CyRTPRH (0x24) +#define CyCOR1 (0x10) +#define CyPARITY_NONE (0x00) +#define CyPARITY_E (0x40) +#define CyPARITY_O (0xC0) +#define Cy_5_BITS (0x04) +#define Cy_6_BITS (0x05) +#define Cy_7_BITS (0x06) +#define Cy_8_BITS (0x07) +#define CyCOR2 (0x17) +#define CyETC (0x20) +#define CyCtsAE (0x02) +#define CyCOR3 (0x16) +#define Cy_1_STOP (0x02) +#define Cy_2_STOP (0x04) +#define CyCOR4 (0x15) +#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */ +#define CyCOR5 (0x14) +#define CyCOR6 (0x18) +#define CyCOR7 (0x07) +#define CyRBPR (0xcb) +#define CyRCOR (0xc8) +#define CyTBPR (0xc3) +#define CyTCOR (0xc0) +#define CySCHR1 (0x1f) +#define CySCHR2 (0x1e) +#define CyTPR (0xda) +#define CyPILR1 (0xe3) +#define CyPILR2 (0xe0) +#define CyPILR3 (0xe1) +#define CyCMR (0x1b) +#define CyASYNC (0x02) +#define CyLICR (0x26) +#define CyLIVR (0x09) +#define CySCRL (0x23) +#define CySCRH (0x22) +#define CyTFTC (0x80) + +static void cons_write(struct console *co, const char *str, unsigned count) +{ + volatile unsigned char *base_addr = (u_char *)CD2401_ADDR; + volatile u_char sink; + u_char ier; + int port; + u_char do_lf = 0; + int i = 0; + + /* Ensure transmitter is enabled! */ + + port = 0; + base_addr[CyCAR] = (u_char)port; + while (base_addr[CyCCR]) + ; + base_addr[CyCCR] = CyENB_XMTR; + + ier = base_addr[CyIER]; + base_addr[CyIER] = CyTxMpty; + + while (1) { + if (pcc2chip[PccSCCTICR] & 0x20) + { + /* We have a Tx int. Acknowledge it */ + sink = pcc2chip[PccTPIACKR]; + if ((base_addr[CyLICR] >> 2) == port) { + if (i == count) { + /* Last char of string is now output */ + base_addr[CyTEOIR] = CyNOTRANS; + break; + } + if (do_lf) { + base_addr[CyTDR] = '\n'; + str++; + i++; + do_lf = 0; + } + else if (*str == '\n') { + base_addr[CyTDR] = '\r'; + do_lf = 1; + } + else { + base_addr[CyTDR] = *str++; + i++; + } + base_addr[CyTEOIR] = 0; + } + else + base_addr[CyTEOIR] = CyNOTRANS; + } + } + + base_addr[CyIER] = ier; +} + +static struct console cons_info = +{ + .name = "sercon", + .write = cons_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static void __init mvme16x_early_console(void) +{ + register_console(&cons_info); + + printk(KERN_INFO "MVME16x: early console registered\n"); +} +#endif void __init config_mvme16x(void) { @@ -183,6 +340,9 @@ void __init config_mvme16x(void) pcc2chip[PccSCCMICR] = 0x10; pcc2chip[PccSCCTICR] = 0x10; pcc2chip[PccSCCRICR] = 0x10; +#ifdef CONFIG_EARLY_PRINTK + mvme16x_early_console(); +#endif } } diff --git a/drivers/block/swim.c b/drivers/block/swim.c index fd5adcd5594..6d5a914b961 100644 --- a/drivers/block/swim.c +++ b/drivers/block/swim.c @@ -26,7 +26,6 @@ #include <linux/delay.h> #include <linux/platform_device.h> -#include <asm/macintosh.h> #include <asm/mac_via.h> #define CARDNAME "swim" diff --git a/drivers/net/ethernet/natsemi/macsonic.c b/drivers/net/ethernet/natsemi/macsonic.c index 70367d76fc8..f1b85561c65 100644 --- a/drivers/net/ethernet/natsemi/macsonic.c +++ b/drivers/net/ethernet/natsemi/macsonic.c @@ -142,8 +142,7 @@ static int macsonic_open(struct net_device* dev) { int retval; - retval = request_irq(dev->irq, sonic_interrupt, IRQ_FLG_FAST, - "sonic", dev); + retval = request_irq(dev->irq, sonic_interrupt, 0, "sonic", dev); if (retval) { printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq); @@ -154,8 +153,8 @@ static int macsonic_open(struct net_device* dev) * rupt as well, which must prevent re-entrance of the sonic handler. */ if (dev->irq == IRQ_AUTO_3) { - retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt, - IRQ_FLG_FAST, "sonic", dev); + retval = request_irq(IRQ_NUBUS_9, macsonic_interrupt, 0, + "sonic", dev); if (retval) { printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, IRQ_NUBUS_9); diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c index 590ce1ef201..4ceeace8045 100644 --- a/drivers/scsi/mac_esp.c +++ b/drivers/scsi/mac_esp.c @@ -25,6 +25,7 @@ #include <asm/dma.h> #include <asm/macints.h> #include <asm/macintosh.h> +#include <asm/mac_via.h> #include <scsi/scsi_host.h> @@ -149,7 +150,7 @@ static inline int mac_esp_wait_for_dreq(struct esp *esp) do { if (mep->pdma_regs == NULL) { - if (mac_irq_pending(IRQ_MAC_SCSIDRQ)) + if (via2_scsi_drq_pending()) return 0; } else { if (nubus_readl(mep->pdma_regs) & 0x200) |