diff options
| -rw-r--r-- | arch/x86/include/asm/ftrace.h | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/cpu/common.c | 8 | ||||
| -rw-r--r-- | arch/x86/kernel/entry_64.S | 44 | ||||
| -rw-r--r-- | arch/x86/kernel/ftrace.c | 102 | ||||
| -rw-r--r-- | arch/x86/kernel/nmi.c | 6 | ||||
| -rw-r--r-- | arch/x86/kernel/traps.c | 8 |
6 files changed, 154 insertions, 16 deletions
diff --git a/arch/x86/include/asm/ftrace.h b/arch/x86/include/asm/ftrace.h index 18d9005d9e4..b0767bc0874 100644 --- a/arch/x86/include/asm/ftrace.h +++ b/arch/x86/include/asm/ftrace.h @@ -34,7 +34,7 @@ #ifndef __ASSEMBLY__ extern void mcount(void); -extern int modifying_ftrace_code; +extern atomic_t modifying_ftrace_code; static inline unsigned long ftrace_call_adjust(unsigned long addr) { diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 82f29e70d05..6b9333b429b 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1101,14 +1101,20 @@ int is_debug_stack(unsigned long addr) addr > (__get_cpu_var(debug_stack_addr) - DEBUG_STKSZ)); } +static DEFINE_PER_CPU(u32, debug_stack_use_ctr); + void debug_stack_set_zero(void) { + this_cpu_inc(debug_stack_use_ctr); load_idt((const struct desc_ptr *)&nmi_idt_descr); } void debug_stack_reset(void) { - load_idt((const struct desc_ptr *)&idt_descr); + if (WARN_ON(!this_cpu_read(debug_stack_use_ctr))) + return; + if (this_cpu_dec_return(debug_stack_use_ctr) == 0) + load_idt((const struct desc_ptr *)&idt_descr); } #else /* CONFIG_X86_64 */ diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 320852d0202..7d65133b51b 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -191,6 +191,44 @@ ENDPROC(native_usergs_sysret64) .endm /* + * When dynamic function tracer is enabled it will add a breakpoint + * to all locations that it is about to modify, sync CPUs, update + * all the code, sync CPUs, then remove the breakpoints. In this time + * if lockdep is enabled, it might jump back into the debug handler + * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF). + * + * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to + * make sure the stack pointer does not get reset back to the top + * of the debug stack, and instead just reuses the current stack. + */ +#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS) + +.macro TRACE_IRQS_OFF_DEBUG + call debug_stack_set_zero + TRACE_IRQS_OFF + call debug_stack_reset +.endm + +.macro TRACE_IRQS_ON_DEBUG + call debug_stack_set_zero + TRACE_IRQS_ON + call debug_stack_reset +.endm + +.macro TRACE_IRQS_IRETQ_DEBUG offset=ARGOFFSET + bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */ + jnc 1f + TRACE_IRQS_ON_DEBUG +1: +.endm + +#else +# define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF +# define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON +# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ +#endif + +/* * C code is not supposed to know about undefined top of stack. Every time * a C function with an pt_regs argument is called from the SYSCALL based * fast path FIXUP_TOP_OF_STACK is needed. @@ -1098,7 +1136,7 @@ ENTRY(\sym) subq $ORIG_RAX-R15, %rsp CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 call save_paranoid - TRACE_IRQS_OFF + TRACE_IRQS_OFF_DEBUG movq %rsp,%rdi /* pt_regs pointer */ xorl %esi,%esi /* no error code */ subq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist) @@ -1393,7 +1431,7 @@ paranoidzeroentry machine_check *machine_check_vector(%rip) ENTRY(paranoid_exit) DEFAULT_FRAME DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF + TRACE_IRQS_OFF_DEBUG testl %ebx,%ebx /* swapgs needed? */ jnz paranoid_restore testl $3,CS(%rsp) @@ -1404,7 +1442,7 @@ paranoid_swapgs: RESTORE_ALL 8 jmp irq_return paranoid_restore: - TRACE_IRQS_IRETQ 0 + TRACE_IRQS_IRETQ_DEBUG 0 RESTORE_ALL 8 jmp irq_return paranoid_userspace: diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 32ff36596ab..c3a7cb4bf6e 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -100,7 +100,7 @@ static const unsigned char *ftrace_nop_replace(void) } static int -ftrace_modify_code(unsigned long ip, unsigned const char *old_code, +ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code, unsigned const char *new_code) { unsigned char replaced[MCOUNT_INSN_SIZE]; @@ -141,7 +141,20 @@ int ftrace_make_nop(struct module *mod, old = ftrace_call_replace(ip, addr); new = ftrace_nop_replace(); - return ftrace_modify_code(rec->ip, old, new); + /* + * On boot up, and when modules are loaded, the MCOUNT_ADDR + * is converted to a nop, and will never become MCOUNT_ADDR + * again. This code is either running before SMP (on boot up) + * or before the code will ever be executed (module load). + * We do not want to use the breakpoint version in this case, + * just modify the code directly. + */ + if (addr == MCOUNT_ADDR) + return ftrace_modify_code_direct(rec->ip, old, new); + + /* Normal cases use add_brk_on_nop */ + WARN_ONCE(1, "invalid use of ftrace_make_nop"); + return -EINVAL; } int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) @@ -152,9 +165,47 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) old = ftrace_nop_replace(); new = ftrace_call_replace(ip, addr); - return ftrace_modify_code(rec->ip, old, new); + /* Should only be called when module is loaded */ + return ftrace_modify_code_direct(rec->ip, old, new); } +/* + * The modifying_ftrace_code is used to tell the breakpoint + * handler to call ftrace_int3_handler(). If it fails to + * call this handler for a breakpoint added by ftrace, then + * the kernel may crash. + * + * As atomic_writes on x86 do not need a barrier, we do not + * need to add smp_mb()s for this to work. It is also considered + * that we can not read the modifying_ftrace_code before + * executing the breakpoint. That would be quite remarkable if + * it could do that. Here's the flow that is required: + * + * CPU-0 CPU-1 + * + * atomic_inc(mfc); + * write int3s + * <trap-int3> // implicit (r)mb + * if (atomic_read(mfc)) + * call ftrace_int3_handler() + * + * Then when we are finished: + * + * atomic_dec(mfc); + * + * If we hit a breakpoint that was not set by ftrace, it does not + * matter if ftrace_int3_handler() is called or not. It will + * simply be ignored. But it is crucial that a ftrace nop/caller + * breakpoint is handled. No other user should ever place a + * breakpoint on an ftrace nop/caller location. It must only + * be done by this code. + */ +atomic_t modifying_ftrace_code __read_mostly; + +static int +ftrace_modify_code(unsigned long ip, unsigned const char *old_code, + unsigned const char *new_code); + int ftrace_update_ftrace_func(ftrace_func_t func) { unsigned long ip = (unsigned long)(&ftrace_call); @@ -163,13 +214,17 @@ int ftrace_update_ftrace_func(ftrace_func_t func) memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE); new = ftrace_call_replace(ip, (unsigned long)func); + + /* See comment above by declaration of modifying_ftrace_code */ + atomic_inc(&modifying_ftrace_code); + ret = ftrace_modify_code(ip, old, new); + atomic_dec(&modifying_ftrace_code); + return ret; } -int modifying_ftrace_code __read_mostly; - /* * A breakpoint was added to the code address we are about to * modify, and this is the handle that will just skip over it. @@ -489,13 +544,46 @@ void ftrace_replace_code(int enable) } } +static int +ftrace_modify_code(unsigned long ip, unsigned const char *old_code, + unsigned const char *new_code) +{ + int ret; + + ret = add_break(ip, old_code); + if (ret) + goto out; + + run_sync(); + + ret = add_update_code(ip, new_code); + if (ret) + goto fail_update; + + run_sync(); + + ret = ftrace_write(ip, new_code, 1); + if (ret) { + ret = -EPERM; + goto out; + } + run_sync(); + out: + return ret; + + fail_update: + probe_kernel_write((void *)ip, &old_code[0], 1); + goto out; +} + void arch_ftrace_update_code(int command) { - modifying_ftrace_code++; + /* See comment above by declaration of modifying_ftrace_code */ + atomic_inc(&modifying_ftrace_code); ftrace_modify_all_code(command); - modifying_ftrace_code--; + atomic_dec(&modifying_ftrace_code); } int __init ftrace_dyn_arch_init(void *data) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 90875279ef3..a0b2f84457b 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -444,14 +444,16 @@ static inline void nmi_nesting_preprocess(struct pt_regs *regs) */ if (unlikely(is_debug_stack(regs->sp))) { debug_stack_set_zero(); - __get_cpu_var(update_debug_stack) = 1; + this_cpu_write(update_debug_stack, 1); } } static inline void nmi_nesting_postprocess(void) { - if (unlikely(__get_cpu_var(update_debug_stack))) + if (unlikely(this_cpu_read(update_debug_stack))) { debug_stack_reset(); + this_cpu_write(update_debug_stack, 0); + } } #endif diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index ff08457a025..05b31d92f69 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -303,8 +303,12 @@ gp_in_kernel: dotraplinkage void __kprobes notrace do_int3(struct pt_regs *regs, long error_code) { #ifdef CONFIG_DYNAMIC_FTRACE - /* ftrace must be first, everything else may cause a recursive crash */ - if (unlikely(modifying_ftrace_code) && ftrace_int3_handler(regs)) + /* + * ftrace must be first, everything else may cause a recursive crash. + * See note by declaration of modifying_ftrace_code in ftrace.c + */ + if (unlikely(atomic_read(&modifying_ftrace_code)) && + ftrace_int3_handler(regs)) return; #endif #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP |