diff options
| -rw-r--r-- | drivers/net/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/net/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/davinci_emac.c | 2832 |
3 files changed, 2844 insertions, 0 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 48b73b07715..0fb446e047e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -926,6 +926,16 @@ config NET_NETX To compile this driver as a module, choose M here. The module will be called netx-eth. +config TI_DAVINCI_EMAC + tristate "TI DaVinci EMAC Support" + depends on ARM && ARCH_DAVINCI + select PHYLIB + help + This driver supports TI's DaVinci Ethernet . + + To compile this driver as a module, choose M here: the module + will be called davinci_emac_driver. This is recommended. + config DM9000 tristate "DM9000 support" depends on ARM || BLACKFIN || MIPS diff --git a/drivers/net/Makefile b/drivers/net/Makefile index dcd5f15dd9e..f07a1e95641 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -2,6 +2,8 @@ # Makefile for the Linux network (ethercard) device drivers. # +obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o + obj-$(CONFIG_E1000) += e1000/ obj-$(CONFIG_E1000E) += e1000e/ obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c new file mode 100644 index 00000000000..cf689a056b3 --- /dev/null +++ b/drivers/net/davinci_emac.c @@ -0,0 +1,2832 @@ +/* + * DaVinci Ethernet Medium Access Controller + * + * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine + * + * Copyright (C) 2009 Texas Instruments. + * + * --------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * --------------------------------------------------------------------------- + * History: + * 0-5 A number of folks worked on this driver in bits and pieces but the major + * contribution came from Suraj Iyer and Anant Gole + * 6.0 Anant Gole - rewrote the driver as per Linux conventions + * 6.1 Chaithrika U S - added support for Gigabit and RMII features, + * PHY layer usage + */ + +/** Pending Items in this driver: + * 1. Use Linux cache infrastcture for DMA'ed memory (dma_xxx functions) + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/in.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ethtool.h> +#include <linux/highmem.h> +#include <linux/proc_fs.h> +#include <linux/ctype.h> +#include <linux/version.h> +#include <linux/spinlock.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/semaphore.h> +#include <linux/phy.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/uaccess.h> + +#include <asm/irq.h> +#include <asm/page.h> + +#include <mach/emac.h> + +static int debug_level; +module_param(debug_level, int, 0); +MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)"); + +/* Netif debug messages possible */ +#define DAVINCI_EMAC_DEBUG (NETIF_MSG_DRV | \ + NETIF_MSG_PROBE | \ + NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | \ + NETIF_MSG_IFDOWN | \ + NETIF_MSG_IFUP | \ + NETIF_MSG_RX_ERR | \ + NETIF_MSG_TX_ERR | \ + NETIF_MSG_TX_QUEUED | \ + NETIF_MSG_INTR | \ + NETIF_MSG_TX_DONE | \ + NETIF_MSG_RX_STATUS | \ + NETIF_MSG_PKTDATA | \ + NETIF_MSG_HW | \ + NETIF_MSG_WOL) + +/* version info */ +#define EMAC_MAJOR_VERSION 6 +#define EMAC_MINOR_VERSION 1 +#define EMAC_MODULE_VERSION "6.1" +MODULE_VERSION(EMAC_MODULE_VERSION); +static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; + +/* Configuration items */ +#define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC upto frames */ +#define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */ +#define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */ +#define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */ +#define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */ +#define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */ +#define EMAC_DEF_PROM_EN (0) /* Promiscous disabled */ +#define EMAC_DEF_PROM_CH (0) /* Promiscous channel is 0 */ +#define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */ +#define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */ +#define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */ +#define EMAC_DEF_MCAST_CH (0) /* Multicast channel is 0 */ + +#define EMAC_DEF_TXPRIO_FIXED (1) /* TX Priority is fixed */ +#define EMAC_DEF_TXPACING_EN (0) /* TX pacing NOT supported*/ + +#define EMAC_DEF_BUFFER_OFFSET (0) /* Buffer offset to DMA (future) */ +#define EMAC_DEF_MIN_ETHPKTSIZE (60) /* Minimum ethernet pkt size */ +#define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4) +#define EMAC_DEF_TX_CH (0) /* Default 0th channel */ +#define EMAC_DEF_RX_CH (0) /* Default 0th channel */ +#define EMAC_DEF_MDIO_TICK_MS (10) /* typically 1 tick=1 ms) */ +#define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */ +#define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */ +#define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */ + +/* Buffer descriptor parameters */ +#define EMAC_DEF_TX_MAX_SERVICE (32) /* TX max service BD's */ +#define EMAC_DEF_RX_MAX_SERVICE (64) /* should = netdev->weight */ + +/* EMAC register related defines */ +#define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF) +#define EMAC_NUM_MULTICAST_BITS (64) +#define EMAC_TEARDOWN_VALUE (0xFFFFFFFC) +#define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1) +#define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1) +#define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2) +#define EMAC_RX_UNICAST_CLEAR_ALL (0xFF) +#define EMAC_INT_MASK_CLEAR (0xFF) + +/* RX MBP register bit positions */ +#define EMAC_RXMBP_PASSCRC_MASK BIT(30) +#define EMAC_RXMBP_QOSEN_MASK BIT(29) +#define EMAC_RXMBP_NOCHAIN_MASK BIT(28) +#define EMAC_RXMBP_CMFEN_MASK BIT(24) +#define EMAC_RXMBP_CSFEN_MASK BIT(23) +#define EMAC_RXMBP_CEFEN_MASK BIT(22) +#define EMAC_RXMBP_CAFEN_MASK BIT(21) +#define EMAC_RXMBP_PROMCH_SHIFT (16) +#define EMAC_RXMBP_PROMCH_MASK (0x7 << 16) +#define EMAC_RXMBP_BROADEN_MASK BIT(13) +#define EMAC_RXMBP_BROADCH_SHIFT (8) +#define EMAC_RXMBP_BROADCH_MASK (0x7 << 8) +#define EMAC_RXMBP_MULTIEN_MASK BIT(5) +#define EMAC_RXMBP_MULTICH_SHIFT (0) +#define EMAC_RXMBP_MULTICH_MASK (0x7) +#define EMAC_RXMBP_CHMASK (0x7) + +/* EMAC register definitions/bit maps used */ +# define EMAC_MBP_RXPROMISC (0x00200000) +# define EMAC_MBP_PROMISCCH(ch) (((ch) & 0x7) << 16) +# define EMAC_MBP_RXBCAST (0x00002000) +# define EMAC_MBP_BCASTCHAN(ch) (((ch) & 0x7) << 8) +# define EMAC_MBP_RXMCAST (0x00000020) +# define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) + +/* EMAC mac_control register */ +#define EMAC_MACCONTROL_TXPTYPE (0x200) +#define EMAC_MACCONTROL_TXPACEEN (0x40) +#define EMAC_MACCONTROL_MIIEN (0x20) +#define EMAC_MACCONTROL_GIGABITEN (0x80) +#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7) +#define EMAC_MACCONTROL_FULLDUPLEXEN (0x1) +#define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) + +/* GIGABIT MODE related bits */ +#define EMAC_DM646X_MACCONTORL_GMIIEN BIT(5) +#define EMAC_DM646X_MACCONTORL_GIG BIT(7) +#define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) + +/* EMAC mac_status register */ +#define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000) +#define EMAC_MACSTATUS_TXERRCODE_SHIFT (20) +#define EMAC_MACSTATUS_TXERRCH_MASK (0x7) +#define EMAC_MACSTATUS_TXERRCH_SHIFT (16) +#define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000) +#define EMAC_MACSTATUS_RXERRCODE_SHIFT (12) +#define EMAC_MACSTATUS_RXERRCH_MASK (0x7) +#define EMAC_MACSTATUS_RXERRCH_SHIFT (8) + +/* EMAC RX register masks */ +#define EMAC_RX_MAX_LEN_MASK (0xFFFF) +#define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) + +/* MAC_IN_VECTOR (0x180) register bit fields */ +#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT (0x20000) +#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT (0x10000) +#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC (0x0100) +#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC (0x01) + +/** NOTE:: For DM646x the IN_VECTOR has changed */ +#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) +#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH) + +/* CPPI bit positions */ +#define EMAC_CPPI_SOP_BIT BIT(31) +#define EMAC_CPPI_EOP_BIT BIT(30) +#define EMAC_CPPI_OWNERSHIP_BIT BIT(29) +#define EMAC_CPPI_EOQ_BIT BIT(28) +#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27) +#define EMAC_CPPI_PASS_CRC_BIT BIT(26) +#define EMAC_RX_BD_BUF_SIZE (0xFFFF) +#define EMAC_BD_LENGTH_FOR_CACHE (16) /* only CPPI bytes */ +#define EMAC_RX_BD_PKT_LENGTH_MASK (0xFFFF) + +/* Max hardware defines */ +#define EMAC_MAX_TXRX_CHANNELS (8) /* Max hardware channels */ +#define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */ + +/* EMAC Peripheral Device Register Memory Layout structure */ +#define EMAC_TXIDVER 0x0 +#define EMAC_TXCONTROL 0x4 +#define EMAC_TXTEARDOWN 0x8 +#define EMAC_RXIDVER 0x10 +#define EMAC_RXCONTROL 0x14 +#define EMAC_RXTEARDOWN 0x18 +#define EMAC_TXINTSTATRAW 0x80 +#define EMAC_TXINTSTATMASKED 0x84 +#define EMAC_TXINTMASKSET 0x88 +#define EMAC_TXINTMASKCLEAR 0x8C +#define EMAC_MACINVECTOR 0x90 + +#define EMAC_DM646X_MACEOIVECTOR 0x94 + +#define EMAC_RXINTSTATRAW 0xA0 +#define EMAC_RXINTSTATMASKED 0xA4 +#define EMAC_RXINTMASKSET 0xA8 +#define EMAC_RXINTMASKCLEAR 0xAC +#define EMAC_MACINTSTATRAW 0xB0 +#define EMAC_MACINTSTATMASKED 0xB4 +#define EMAC_MACINTMASKSET 0xB8 +#define EMAC_MACINTMASKCLEAR 0xBC + +#define EMAC_RXMBPENABLE 0x100 +#define EMAC_RXUNICASTSET 0x104 +#define EMAC_RXUNICASTCLEAR 0x108 +#define EMAC_RXMAXLEN 0x10C +#define EMAC_RXBUFFEROFFSET 0x110 +#define EMAC_RXFILTERLOWTHRESH 0x114 + +#define EMAC_MACCONTROL 0x160 +#define EMAC_MACSTATUS 0x164 +#define EMAC_EMCONTROL 0x168 +#define EMAC_FIFOCONTROL 0x16C +#define EMAC_MACCONFIG 0x170 +#define EMAC_SOFTRESET 0x174 +#define EMAC_MACSRCADDRLO 0x1D0 +#define EMAC_MACSRCADDRHI 0x1D4 +#define EMAC_MACHASH1 0x1D8 +#define EMAC_MACHASH2 0x1DC +#define EMAC_MACADDRLO 0x500 +#define EMAC_MACADDRHI 0x504 +#define EMAC_MACINDEX 0x508 + +/* EMAC HDP and Completion registors */ +#define EMAC_TXHDP(ch) (0x600 + (ch * 4)) +#define EMAC_RXHDP(ch) (0x620 + (ch * 4)) +#define EMAC_TXCP(ch) (0x640 + (ch * 4)) +#define EMAC_RXCP(ch) (0x660 + (ch * 4)) + +/* EMAC statistics registers */ +#define EMAC_RXGOODFRAMES 0x200 +#define EMAC_RXBCASTFRAMES 0x204 +#define EMAC_RXMCASTFRAMES 0x208 +#define EMAC_RXPAUSEFRAMES 0x20C +#define EMAC_RXCRCERRORS 0x210 +#define EMAC_RXALIGNCODEERRORS 0x214 +#define EMAC_RXOVERSIZED 0x218 +#define EMAC_RXJABBER 0x21C +#define EMAC_RXUNDERSIZED 0x220 +#define EMAC_RXFRAGMENTS 0x224 +#define EMAC_RXFILTERED 0x228 +#define EMAC_RXQOSFILTERED 0x22C +#define EMAC_RXOCTETS 0x230 +#define EMAC_TXGOODFRAMES 0x234 +#define EMAC_TXBCASTFRAMES 0x238 +#define EMAC_TXMCASTFRAMES 0x23C +#define EMAC_TXPAUSEFRAMES 0x240 +#define EMAC_TXDEFERRED 0x244 +#define EMAC_TXCOLLISION 0x248 +#define EMAC_TXSINGLECOLL 0x24C +#define EMAC_TXMULTICOLL 0x250 +#define EMAC_TXEXCESSIVECOLL 0x254 +#define EMAC_TXLATECOLL 0x258 +#define EMAC_TXUNDERRUN 0x25C +#define EMAC_TXCARRIERSENSE 0x260 +#define EMAC_TXOCTETS 0x264 +#define EMAC_NETOCTETS 0x280 +#define EMAC_RXSOFOVERRUNS 0x284 +#define EMAC_RXMOFOVERRUNS 0x288 +#define EMAC_RXDMAOVERRUNS 0x28C + +/* EMAC DM644x control registers */ +#define EMAC_CTRL_EWCTL (0x4) +#define EMAC_CTRL_EWINTTCNT (0x8) + +/* EMAC MDIO related */ +/* Mask & Control defines */ +#define MDIO_CONTROL_CLKDIV (0xFF) +#define MDIO_CONTROL_ENABLE BIT(30) +#define MDIO_USERACCESS_GO BIT(31) +#define MDIO_USERACCESS_WRITE BIT(30) +#define MDIO_USERACCESS_READ (0) +#define MDIO_USERACCESS_REGADR (0x1F << 21) +#define MDIO_USERACCESS_PHYADR (0x1F << 16) +#define MDIO_USERACCESS_DATA (0xFFFF) +#define MDIO_USERPHYSEL_LINKSEL BIT(7) +#define MDIO_VER_MODID (0xFFFF << 16) +#define MDIO_VER_REVMAJ (0xFF << 8) +#define MDIO_VER_REVMIN (0xFF) + +#define MDIO_USERACCESS(inst) (0x80 + (inst * 8)) +#define MDIO_USERPHYSEL(inst) (0x84 + (inst * 8)) +#define MDIO_CONTROL (0x04) + +/* EMAC DM646X control module registers */ +#define EMAC_DM646X_CMRXINTEN (0x14) +#define EMAC_DM646X_CMTXINTEN (0x18) + +/* EMAC EOI codes for C0 */ +#define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01) +#define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02) + +/** net_buf_obj: EMAC network bufferdata structure + * + * EMAC network buffer data structure + */ +struct emac_netbufobj { + void *buf_token; + char *data_ptr; + int length; +}; + +/** net_pkt_obj: EMAC network packet data structure + * + * EMAC network packet data structure - supports buffer list (for future) + */ +struct emac_netpktobj { + void *pkt_token; /* data token may hold tx/rx chan id */ + struct emac_netbufobj *buf_list; /* array of network buffer objects */ + int num_bufs; + int pkt_length; +}; + +/** emac_tx_bd: EMAC TX Buffer descriptor data structure + * + * EMAC TX Buffer descriptor data structure + */ +struct emac_tx_bd { + int h_next; + int buff_ptr; + int off_b_len; + int mode; /* SOP, EOP, ownership, EOQ, teardown,Qstarv, length */ + struct emac_tx_bd __iomem *next; + void *buf_token; +}; + +/** emac_txch: EMAC TX Channel data structure + * + * EMAC TX Channel data structure + */ +struct emac_txch { + /* Config related */ + u32 num_bd; + u32 service_max; + + /* CPPI specific */ + u32 alloc_size; + void __iomem *bd_mem; + struct emac_tx_bd __iomem *bd_pool_head; + struct emac_tx_bd __iomem *active_queue_head; + struct emac_tx_bd __iomem *active_queue_tail; + struct emac_tx_bd __iomem *last_hw_bdprocessed; + u32 queue_active; + u32 teardown_pending; + u32 *tx_complete; + + /** statistics */ + u32 proc_count; /* TX: # of times emac_tx_bdproc is called */ + u32 mis_queued_packets; + u32 queue_reinit; + u32 end_of_queue_add; + u32 out_of_tx_bd; + u32 no_active_pkts; /* IRQ when there were no packets to process */ + u32 active_queue_count; +}; + +/** emac_rx_bd: EMAC RX Buffer descriptor data structure + * + * EMAC RX Buffer descriptor data structure + */ +struct emac_rx_bd { + int h_next; + int buff_ptr; + int off_b_len; + int mode; + struct emac_rx_bd __iomem *next; + void *data_ptr; + void *buf_token; +}; + +/** emac_rxch: EMAC RX Channel data structure + * + * EMAC RX Channel data structure + */ +struct emac_rxch { + /* configuration info */ + u32 num_bd; + u32 service_max; + u32 buf_size; + char mac_addr[6]; + + /** CPPI specific */ + u32 alloc_size; + void __iomem *bd_mem; + struct emac_rx_bd __iomem *bd_pool_head; + struct emac_rx_bd __iomem *active_queue_head; + struct emac_rx_bd __iomem *active_queue_tail; + u32 queue_active; + u32 teardown_pending; + + /* packet and buffer objects */ + struct emac_netpktobj pkt_queue; + struct emac_netbufobj buf_queue; + + /** statistics */ + u32 proc_count; /* number of times emac_rx_bdproc is called */ + u32 processed_bd; + u32 recycled_bd; + u32 out_of_rx_bd; + u32 out_of_rx_buffers; + u32 queue_reinit; + u32 end_of_queue_add; + u32 end_of_queue; + u32 mis_queued_packets; +}; + +/* emac_priv: EMAC private data structure + * + * EMAC adapter private data structure + */ +struct emac_priv { + u32 msg_enable; + struct net_device *ndev; + struct platform_device *pdev; + struct napi_struct napi; + char mac_addr[6]; + spinlock_t tx_lock; + spinlock_t rx_lock; + void __iomem *remap_addr; + u32 emac_base_phys; + void __iomem *emac_base; + void __iomem *ctrl_base; + void __iomem *emac_ctrl_ram; + u32 ctrl_ram_size; + struct emac_txch *txch[EMAC_DEF_MAX_TX_CH]; + struct emac_rxch *rxch[EMAC_DEF_MAX_RX_CH]; + u32 link; /* 1=link on, 0=link off */ + u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */ + u32 duplex; /* Link duplex: 0=Half, 1=Full */ + u32 rx_buf_size; + u32 isr_count; + u8 rmii_en; + u8 version; + struct net_device_stats net_dev_stats; + u32 mac_hash1; + u32 mac_hash2; + u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS]; + u32 rx_addr_type; + /* periodic timer required for MDIO polling */ + struct timer_list periodic_timer; + u32 periodic_ticks; + u32 timer_active; + u32 phy_mask; + /* mii_bus,phy members */ + struct mii_bus *mii_bus; + struct phy_device *phydev; + spinlock_t lock; +}; + +/* clock frequency for EMAC */ +static struct clk *emac_clk; +static unsigned long emac_bus_frequency; +static unsigned long mdio_max_freq; + +/* EMAC internal utility function */ +static inline u32 emac_virt_to_phys(void __iomem *addr) +{ + return (u32 __force) io_v2p(addr); +} + +/* Cache macros - Packet buffers would be from skb pool which is cached */ +#define EMAC_VIRT_NOCACHE(addr) (addr) +#define EMAC_CACHE_INVALIDATE(addr, size) \ + dma_cache_maint((void *)addr, size, DMA_FROM_DEVICE) +#define EMAC_CACHE_WRITEBACK(addr, size) \ + dma_cache_maint((void *)addr, size, DMA_TO_DEVICE) +#define EMAC_CACHE_WRITEBACK_INVALIDATE(addr, size) \ + dma_cache_maint((void *)addr, size, DMA_BIDIRECTIONAL) + +/* DM644x does not have BD's in cached memory - so no cache functions */ +#define BD_CACHE_INVALIDATE(addr, size) +#define BD_CACHE_WRITEBACK(addr, size) +#define BD_CACHE_WRITEBACK_INVALIDATE(addr, size) + +/* EMAC TX Host Error description strings */ +static char *emac_txhost_errcodes[16] = { + "No error", "SOP error", "Ownership bit not set in SOP buffer", + "Zero Next Buffer Descriptor Pointer Without EOP", + "Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error", + "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", + "Reserved", "Reserved", "Reserved", "Reserved" +}; + +/* EMAC RX Host Error description strings */ +static char *emac_rxhost_errcodes[16] = { + "No error", "Reserved", "Ownership bit not set in input buffer", + "Reserved", "Zero Buffer Pointer", "Reserved", "Reserved", + "Reserved", "Reserved", "Reserved", "Reserved", "Reserved", + "Reserved", "Reserved", "Reserved", "Reserved" +}; + +/* Helper macros */ +#define emac_read(reg) ioread32(priv->emac_base + (reg)) +#define emac_write(reg, val) iowrite32(val, priv->emac_base + (reg)) + +#define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg))) +#define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg))) + +#define emac_mdio_read(reg) ioread32(bus->priv + (reg)) +#define emac_mdio_write(reg, val) iowrite32(val, (bus->priv + (reg))) + +/** + * emac_dump_regs: Dump important EMAC registers to debug terminal + * @priv: The DaVinci EMAC private adapter structure + * + * Executes ethtool set cmd & sets phy mode + * + */ +static void emac_dump_regs(struct emac_priv *priv) +{ + struct device *emac_dev = &priv->ndev->dev; + + /* Print important registers in EMAC */ + dev_info(emac_dev, "EMAC Basic registers\n"); + dev_info(emac_dev, "EMAC: EWCTL: %08X, EWINTTCNT: %08X\n", + emac_ctrl_read(EMAC_CTRL_EWCTL), + emac_ctrl_read(EMAC_CTRL_EWINTTCNT)); + dev_info(emac_dev, "EMAC: TXID: %08X %s, RXID: %08X %s\n", + emac_read(EMAC_TXIDVER), + ((emac_read(EMAC_TXCONTROL)) ? "enabled" : "disabled"), + emac_read(EMAC_RXIDVER), + ((emac_read(EMAC_RXCONTROL)) ? "enabled" : "disabled")); + dev_info(emac_dev, "EMAC: TXIntRaw:%08X, TxIntMasked: %08X, "\ + "TxIntMasSet: %08X\n", emac_read(EMAC_TXINTSTATRAW), + emac_read(EMAC_TXINTSTATMASKED), emac_read(EMAC_TXINTMASKSET)); + dev_info(emac_dev, "EMAC: RXIntRaw:%08X, RxIntMasked: %08X, "\ + "RxIntMasSet: %08X\n", emac_read(EMAC_RXINTSTATRAW), + emac_read(EMAC_RXINTSTATMASKED), emac_read(EMAC_RXINTMASKSET)); + dev_info(emac_dev, "EMAC: MacIntRaw:%08X, MacIntMasked: %08X, "\ + "MacInVector=%08X\n", emac_read(EMAC_MACINTSTATRAW), + emac_read(EMAC_MACINTSTATMASKED), emac_read(EMAC_MACINVECTOR)); + dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n", + emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL)); + dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\ + "RXMaxLen=%08X\n", emac_read(EMAC_RXMBPENABLE), + emac_read(EMAC_RXUNICASTSET), emac_read(EMAC_RXMAXLEN)); + dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\ + "MacConfig=%08X\n", emac_read(EMAC_MACCONTROL), + emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG)); + dev_info(emac_dev, "EMAC: TXHDP[0]:%08X, RXHDP[0]: %08X\n", + emac_read(EMAC_TXHDP(0)), emac_read(EMAC_RXHDP(0))); + dev_info(emac_dev, "EMAC Statistics\n"); + dev_info(emac_dev, "EMAC: rx_good_frames:%d\n", + emac_read(EMAC_RXGOODFRAMES)); + dev_info(emac_dev, "EMAC: rx_broadcast_frames:%d\n", + emac_read(EMAC_RXBCASTFRAMES)); + dev_info(emac_dev, "EMAC: rx_multicast_frames:%d\n", + emac_read(EMAC_RXMCASTFRAMES)); + dev_info(emac_dev, "EMAC: rx_pause_frames:%d\n", + emac_read(EMAC_RXPAUSEFRAMES)); + dev_info(emac_dev, "EMAC: rx_crcerrors:%d\n", + emac_read(EMAC_RXCRCERRORS)); + dev_info(emac_dev, "EMAC: rx_align_code_errors:%d\n", + emac_read(EMAC_RXALIGNCODEERRORS)); + dev_info(emac_dev, "EMAC: rx_oversized_frames:%d\n", + emac_read(EMAC_RXOVERSIZED)); + dev_info(emac_dev, "EMAC: rx_jabber_frames:%d\n", + emac_read(EMAC_RXJABBER)); + dev_info(emac_dev, "EMAC: rx_undersized_frames:%d\n", + emac_read(EMAC_RXUNDERSIZED)); + dev_info(emac_dev, "EMAC: rx_fragments:%d\n", + emac_read(EMAC_RXFRAGMENTS)); + dev_info(emac_dev, "EMAC: rx_filtered_frames:%d\n", + emac_read(EMAC_RXFILTERED)); + dev_info(emac_dev, "EMAC: rx_qos_filtered_frames:%d\n", + emac_read(EMAC_RXQOSFILTERED)); + dev_info(emac_dev, "EMAC: rx_octets:%d\n", + emac_read(EMAC_RXOCTETS)); + dev_info(emac_dev, "EMAC: tx_goodframes:%d\n", + emac_read(EMAC_TXGOODFRAMES)); + dev_info(emac_dev, "EMAC: tx_bcastframes:%d\n", + emac_read(EMAC_TXBCASTFRAMES)); + dev_info(emac_dev, "EMAC: tx_mcastframes:%d\n", + emac_read(EMAC_TXMCASTFRAMES)); + dev_info(emac_dev, "EMAC: tx_pause_frames:%d\n", + emac_read(EMAC_TXPAUSEFRAMES)); + dev_info(emac_dev, "EMAC: tx_deferred_frames:%d\n", + emac_read(EMAC_TXDEFERRED)); + dev_info(emac_dev, "EMAC: tx_collision_frames:%d\n", + emac_read(EMAC_TXCOLLISION)); + dev_info(emac_dev, "EMAC: tx_single_coll_frames:%d\n", + emac_read(EMAC_TXSINGLECOLL)); + dev_info(emac_dev, "EMAC: tx_mult_coll_frames:%d\n", + emac_read(EMAC_TXMULTICOLL)); + dev_info(emac_dev, "EMAC: tx_excessive_collisions:%d\n", + emac_read(EMAC_TXEXCESSIVECOLL)); + dev_info(emac_dev, "EMAC: tx_late_collisions:%d\n", + emac_read(EMAC_TXLATECOLL)); + dev_info(emac_dev, "EMAC: tx_underrun:%d\n", + emac_read(EMAC_TXUNDERRUN)); + dev_info(emac_dev, "EMAC: tx_carrier_sense_errors:%d\n", + emac_read(EMAC_TXCARRIERSENSE)); + dev_info(emac_dev, "EMAC: tx_octets:%d\n", + emac_read(EMAC_TXOCTETS)); + dev_info(emac_dev, "EMAC: net_octets:%d\n", + emac_read(EMAC_NETOCTETS)); + dev_info(emac_dev, "EMAC: rx_sof_overruns:%d\n", + emac_read(EMAC_RXSOFOVERRUNS)); + dev_info(emac_dev, "EMAC: rx_mof_overruns:%d\n", + emac_read(EMAC_RXMOFOVERRUNS)); + dev_info(emac_dev, "EMAC: rx_dma_overruns:%d\n", + emac_read(EMAC_RXDMAOVERRUNS)); +} + +/************************************************************************* + * EMAC MDIO/Phy Functionality + *************************************************************************/ +/** + * emac_get_drvinfo: Get EMAC driver information + * @ndev: The DaVinci EMAC network adapter + * @info: ethtool info structure containing name and version + * + * Returns EMAC driver information (name and version) + * + */ +static void emac_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, emac_version_string); + strcpy(info->version, EMAC_MODULE_VERSION); +} + +/** + * emac_get_settings: Get EMAC settings + * @ndev: The DaVinci EMAC network adapter + * @ecmd: ethtool command + * + * Executes ethool get command + * + */ +static int emac_get_settings(struct net_device *ndev, + struct ethtool_cmd *ecmd) +{ + struct emac_priv *priv = netdev_priv(ndev); + if (priv->phy_mask) + return phy_ethtool_gset(priv->phydev, ecmd); + else + return -EOPNOTSUPP; + +} + +/** + * emac_set_settings: Set EMAC settings + * @ndev: The DaVinci EMAC network adapter + * @ecmd: ethtool command + * + * Executes ethool set command + * + */ +static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd) +{ + struct emac_priv *priv = netdev_priv(ndev); + if (priv->phy_mask) + return phy_ethtool_sset(priv->phydev, ecmd); + else + return -EOPNOTSUPP; + +} + +/** + * ethtool_ops: DaVinci EMAC Ethtool structure + * + * Ethtool support for EMAC adapter + * + */ +static const struct ethtool_ops ethtool_ops = { + .get_drvinfo = emac_get_drvinfo, + .get_settings = emac_get_settings, + .set_settings = emac_set_settings, + .get_link = ethtool_op_get_link, +}; + +/** + * emac_update_phystatus: Update Phy status + * @priv: The DaVinci EMAC private adapter structure + * + * Updates phy status and takes action for network queue if required + * based upon link status + * + */ +static void emac_update_phystatus(struct emac_priv *priv) +{ + u32 mac_control; + u32 new_duplex; + u32 cur_duplex; + struct net_device *ndev = priv->ndev; + + mac_control = emac_read(EMAC_MACCONTROL); + cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ? + DUPLEX_FULL : DUPLEX_HALF; + if (priv->phy_mask) + new_duplex = priv->phydev->duplex; + else + new_duplex = DUPLEX_FULL; + + /* We get called only if link has changed (speed/duplex/status) */ + if ((priv->link) && (new_duplex != cur_duplex)) { + priv->duplex = new_duplex; + if (DUPLEX_FULL == priv->duplex) + mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN); + else + mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN); + } + + if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { + mac_control = emac_read(EMAC_MACCONTROL); + mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN | + EMAC_DM646X_MACCONTORL_GIG | + EMAC_DM646X_MACCONTORL_GIGFORCE); + } else { + /* Clear the GIG bit and GIGFORCE bit */ + mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE | + EMAC_DM646X_MACCONTORL_GIG); + + if (priv->rmii_en && (priv->speed == SPEED_100)) + mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK; + else + mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK; + } + + /* Update mac_control if changed */ + emac_write(EMAC_MACCONTROL, mac_control); + + if (priv->link) { + /* link ON */ + if (!netif_carrier_ok(ndev)) + netif_carrier_on(ndev); + /* reactivate the transmit queue if it is stopped */ + if (netif_running(ndev) && netif_queue_stopped(ndev)) + netif_wake_queue(ndev); + } else { + /* link OFF */ + if (netif_carrier_ok(ndev)) + netif_carrier_off(ndev); + if (!netif_queue_stopped(ndev)) + netif_stop_queue(ndev); + } +} + +/** + * hash_get: Calculate hash value from mac address + * @addr: mac address to delete from hash table + * + * Calculates hash value from mac address + * + */ +static u32 hash_get(u8 *addr) +{ + u32 hash; + u8 tmpval; + int cnt; + hash = 0; + + for (cnt = 0; cnt < 2; cnt++) { + tmpval = *addr++; + hash ^= (tmpval >> 2) ^ (tmpval << 4); + tmpval = *addr++; + hash ^= (tmpval >> 4) ^ (tmpval << 2); + tmpval = *addr++; + hash ^= (tmpval >> 6) ^ (tmpval); + } + + return hash & 0x3F; +} + +/** + * hash_add: Hash function to add mac addr from hash table + * @priv: The DaVinci EMAC private adapter structure + * mac_addr: mac address to delete from hash table + * + * Adds mac address to the internal hash table + * + */ +static int hash_add(struct emac_priv *priv, u8 *mac_addr) +{ + struct device *emac_dev = &priv->ndev->dev; + u32 rc = 0; + u32 hash_bit; + u32 hash_value = hash_get(mac_addr); + + if (hash_value >= EMAC_NUM_MULTICAST_BITS) { + if (netif_msg_drv(priv)) { + dev_err(emac_dev, "DaVinci EMAC: hash_add(): Invalid "\ + "Hash %08x, should not be greater than %08x", + hash_value, (EMAC_NUM_MULTICAST_BITS - 1)); + } + return -1; + } + + /* set the hash bit only if not previously set */ + if (priv->multicast_hash_cnt[hash_value] == 0) { + rc = 1; /* hash value changed */ + if (hash_value < 32) { + hash_bit = BIT(hash_value); + priv->mac_hash1 |= hash_bit; + } else { + hash_bit = BIT((hash_value - 32)); + priv->mac_hash2 |= hash_bit; + } + } + + /* incr counter for num of mcast addr's mapped to "this" hash bit */ + ++priv->multicast_hash_cnt[hash_value]; + + return rc; +} + +/** + * hash_del: Hash function to delete mac addr from hash table + * @priv: The DaVinci EMAC private adapter structure + * mac_addr: mac address to delete from hash table + * + * Removes mac address from the internal hash table + * + */ +static int hash_del(struct emac_priv *priv, u8 *mac_addr) +{ + u32 hash_value; + u32 hash_bit; + + hash_value = hash_get(mac_addr); + if (priv->multicast_hash_cnt[hash_value] > 0) { + /* dec cntr for num of mcast addr's mapped to this hash bit */ + --priv->multicast_hash_cnt[hash_value]; + } + + /* if counter still > 0, at least one multicast address refers + * to this hash bit. so return 0 */ + if (priv->multicast_hash_cnt[hash_value] > 0) + return 0; + + if (hash_value < 32) { + hash_bit = BIT(hash_value); + priv->mac_hash1 &= ~hash_bit; + } else { + hash_bit = BIT((hash_value - 32)); + priv->mac_hash2 &= ~hash_bit; + } + + /* return 1 to indicate change in mac_hash registers reqd */ + return 1; +} + +/* EMAC multicast operation */ +#define EMAC_MULTICAST_ADD 0 +#define EMAC_MULTICAST_DEL 1 +#define EMAC_ALL_MULTI_SET 2 +#define EMAC_ALL_MULTI_CLR 3 + +/** + * emac_add_mcast: Set multicast address in the EMAC adapter (Internal) + * @priv: The DaVinci EMAC private adapter structure + * @action: multicast operation to perform + * mac_addr: mac address to set + * + * Set multicast addresses in EMAC adapter - internal function + * + */ +static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr) +{ + struct device *emac_dev = &priv->ndev->dev; + int update = -1; + + switch (action) { + case EMAC_MULTICAST_ADD: + update = hash_add(priv, mac_addr); + break; + case EMAC_MULTICAST_DEL: + update = hash_del(priv, mac_addr); + break; + case EMAC_ALL_MULTI_SET: + update = 1; + priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE; + priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE; + break; + case EMAC_ALL_MULTI_CLR: + update = 1; + priv->mac_hash1 = 0; + priv->mac_hash2 = 0; + memset(&(priv->multicast_hash_cnt[0]), 0, + sizeof(priv->multicast_hash_cnt[0]) * + EMAC_NUM_MULTICAST_BITS); + break; + default: + if (netif_msg_drv(priv)) + dev_err(emac_dev, "DaVinci EMAC: add_mcast"\ + ": bad operation %d", action); + break; + } + + /* write to the hardware only if the register status chances */ + if (update > 0) { + emac_write(EMAC_MACHASH1, priv->mac_hash1); + emac_write(EMAC_MACHASH2, priv->mac_hash2); + } +} + +/** + * emac_dev_mcast_set: Set multicast address in the EMAC adapter + * @ndev: The DaVinci EMAC network adapter + * + * Set multicast addresses in EMAC adapter + * + */ +static void emac_dev_mcast_set(struct net_device *ndev) +{ + u32 mbp_enable; + struct emac_priv *priv = netdev_priv(ndev); + + mbp_enable = emac_read(EMAC_RXMBPENABLE); + if (ndev->flags & IFF_PROMISC) { + mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH)); + mbp_enable |= (EMAC_MBP_RXPROMISC); + } else { + mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC); + if ((ndev->flags & IFF_ALLMULTI) || + (ndev->mc_count > EMAC_DEF_MAX_MULTICAST_ADDRESSES)) { + mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); + emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL); + } + if (ndev->mc_count > 0) { + struct dev_mc_list *mc_ptr; + mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST); + emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); + /* program multicast address list into EMAC hardware */ + for (mc_ptr = ndev->mc_list; mc_ptr; + mc_ptr = mc_ptr->next) { + emac_add_mcast(priv, EMAC_MULTICAST_ADD, + (u8 *)mc_ptr->dmi_addr); + } + } else { + mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST); + emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL); + } + } + /* Set mbp config register */ + emac_write(EMAC_RXMBPENABLE, mbp_enable); +} + +/************************************************************************* + * EMAC Hardware manipulation + *************************************************************************/ + +/** + * emac_int_disable: Disable EMAC module interrupt (from adapter) + * @priv: The DaVinci EMAC private adapter structure + * + * Disable EMAC interrupt on the adapter + * + */ +static void emac_int_disable(struct emac_priv *priv) +{ + if (priv->version == EMAC_VERSION_2) { + unsigned long flags; + + local_irq_save(flags); + + /* Program C0_Int_En to zero to turn off + * interrupts to the CPU */ + emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0); + emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0); + /* NOTE: Rx Threshold and Misc interrupts are not disabled */ + + local_irq_restore(flags); + + } else { + /* Set DM644x control registers for interrupt control */ + emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0); + } +} + +/** + * emac_int_enable: Enable EMAC module interrupt (from adapter) + * @priv: The DaVinci EMAC private adapter structure + * + * Enable EMAC interrupt on the adapter + * + */ +static void emac_int_enable(struct emac_priv *priv) +{ + if (priv->version == EMAC_VERSION_2) { + emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff); + emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff); + + /* In addition to turning on interrupt Enable, we need + * ack by writing appropriate values to the EOI + * register */ + + /* NOTE: Rx Threshold and Misc interrupts are not enabled */ + + /* ack rxen only then a new pulse will be generated */ + emac_write(EMAC_DM646X_MACEOIVECTOR, + EMAC_DM646X_MAC_EOI_C0_RXEN); + + /* ack txen- only then a new pulse will be generated */ + emac_write(EMAC_DM646X_MACEOIVECTOR, + EMAC_DM646X_MAC_EOI_C0_TXEN); + + } else { + /* Set DM644x control registers for interrupt control */ + emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1); + } +} + +/** + * emac_irq: EMAC interrupt handler + * @irq: interrupt number + * @dev_id: EMAC network adapter data structure ptr + * + * EMAC Interrupt handler - we only schedule NAPI and not process any packets + * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function + * + * Returns interrupt handled condition + */ +static irqreturn_t emac_irq(int irq, void *dev_id) +{ + struct net_device *ndev = (struct net_device *)dev_id; + struct emac_priv *priv = netdev_priv(ndev); + + ++priv->isr_count; + if (likely(netif_running(priv->ndev))) { + emac_int_disable(priv); + napi_schedule(&priv->napi); + } else { + /* we are closing down, so dont process anything */ + } + return IRQ_HANDLED; +} + +/** EMAC on-chip buffer descriptor memory + * + * WARNING: Please note that the on chip memory is used for both TX and RX + * buffer descriptor queues and is equally divided between TX and RX desc's + * If the number of TX or RX descriptors change this memory pointers need + * to be adjusted. If external memory is allocated then these pointers can + * pointer to the memory + * + */ +#define EMAC_TX_BD_MEM(priv) ((priv)->emac_ctrl_ram) +#define EMAC_RX_BD_MEM(priv) ((priv)->emac_ctrl_ram + \ + (((priv)->ctrl_ram_size) >> 1)) + +/** + * emac_init_txch: TX channel initialization + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * + * Called during device init to setup a TX channel (allocate buffer desc + * create free pool and keep ready for transmission + * + * Returns success(0) or mem alloc failures error code + */ +static int emac_init_txch(struct emac_priv *priv, u32 ch) +{ + struct device *emac_dev = &priv->ndev->dev; + u32 cnt, bd_size; + void __iomem *mem; + struct emac_tx_bd __iomem *curr_bd; + struct emac_txch *txch = NULL; + + txch = kzalloc(sizeof(struct emac_txch), GFP_KERNEL); + if (NULL == txch) { + dev_err(emac_dev, "DaVinci EMAC: TX Ch mem alloc failed"); + return -ENOMEM; + } + priv->txch[ch] = txch; + txch->service_max = EMAC_DEF_TX_MAX_SERVICE; + txch->active_queue_head = NULL; + txch->active_queue_tail = NULL; + txch->queue_active = 0; + txch->teardown_pending = 0; + + /* allocate memory for TX CPPI channel on a 4 byte boundry */ + txch->tx_complete = kzalloc(txch->service_max * sizeof(u32), + GFP_KERNEL); + if (NULL == txch->tx_complete) { + dev_err(emac_dev, "DaVinci EMAC: Tx service mem alloc failed"); + kfree(txch); + return -ENOMEM; + } + + /* allocate buffer descriptor pool align every BD on four word + * boundry for future requirements */ + bd_size = (sizeof(struct emac_tx_bd) + 0xF) & ~0xF; + txch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size; + txch->alloc_size = (((bd_size * txch->num_bd) + 0xF) & ~0xF); + + /* alloc TX BD memory */ + txch->bd_mem = EMAC_TX_BD_MEM(priv); + __memzero((void __force *)txch->bd_mem, txch->alloc_size); + + /* initialize the BD linked list */ + mem = (void __force __iomem *) + (((u32 __force) txch->bd_mem + 0xF) & ~0xF); + txch->bd_pool_head = NULL; + for (cnt = 0; cnt < txch->num_bd; cnt++) { + curr_bd = mem + (cnt * bd_size); + curr_bd->next = txch->bd_pool_head; + txch->bd_pool_head = curr_bd; + } + + /* reset statistics counters */ + txch->out_of_tx_bd = 0; + txch->no_active_pkts = 0; + txch->active_queue_count = 0; + + return 0; +} + +/** + * emac_cleanup_txch: Book-keep function to clean TX channel resources + * @priv: The DaVinci EMAC private adapter structure + * @ch: TX channel number + * + * Called to clean up TX channel resources + * + */ +static void emac_cleanup_txch(struct emac_priv *priv, u32 ch) +{ + struct emac_txch *txch = priv->txch[ch]; + + if (txch) { + if (txch->bd_mem) + txch->bd_mem = NULL; + kfree(txch->tx_complete); + kfree(txch); + priv->txch[ch] = NULL; + } +} + +/** + * emac_net_tx_complete: TX packet completion function + * @priv: The DaVinci EMAC private adapter structure + * @net_data_tokens: packet token - skb pointer + * @num_tokens: number of skb's to free + * @ch: TX channel number + * + * Frees the skb once packet is transmitted + * + */ +static int emac_net_tx_complete(struct emac_priv *priv, + void **net_data_tokens, + int num_tokens, u32 ch) +{ + u32 cnt; + + if (unlikely(num_tokens && netif_queue_stopped(priv->ndev))) + netif_start_queue(priv->ndev); + for (cnt = 0; cnt < num_tokens; cnt++) { + struct sk_buff *skb = (struct sk_buff *)net_data_tokens[cnt]; + if (skb == NULL) + continue; + priv->net_dev_stats.tx_packets++; + priv->net_dev_stats.tx_bytes += skb->len; + dev_kfree_skb_any(skb); + } + return 0; +} + +/** + * emac_txch_teardown: TX channel teardown + * @priv: The DaVinci EMAC private adapter structure + * @ch: TX channel number + * + * Called to teardown TX channel + * + */ +static void emac_txch_teardown(struct emac_priv *priv, u32 ch) +{ + struct device *emac_dev = &priv->ndev->dev; + u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */ + struct emac_txch *txch = priv->txch[ch]; + struct emac_tx_bd __iomem *curr_bd; + + while ((emac_read(EMAC_TXCP(ch)) & EMAC_TEARDOWN_VALUE) != + EMAC_TEARDOWN_VALUE) { + /* wait till tx teardown complete */ + cpu_relax(); /* TODO: check if this helps ... */ + --teardown_cnt; + if (0 == teardown_cnt) { + dev_err(emac_dev, "EMAC: TX teardown aborted\n"); + break; + } + } + emac_write(EMAC_TXCP(ch), EMAC_TEARDOWN_VALUE); + + /* process sent packets and return skb's to upper layer */ + if (1 == txch->queue_active) { + curr_bd = txch->active_queue_head; + while (curr_bd != NULL) { + emac_net_tx_complete(priv, (void __force *) + &curr_bd->buf_token, 1, ch); + if (curr_bd != txch->active_queue_tail) + curr_bd = curr_bd->next; + else + break; + } + txch->bd_pool_head = txch->active_queue_head; + txch->active_queue_head = + txch->active_queue_tail = NULL; + } +} + +/** + * emac_stop_txch: Stop TX channel operation + * @priv: The DaVinci EMAC private adapter structure + * @ch: TX channel number + * + * Called to stop TX channel operation + * + */ +static void emac_stop_txch(struct emac_priv *priv, u32 ch) +{ + struct emac_txch *txch = priv->txch[ch]; + + if (txch) { + txch->teardown_pending = 1; + emac_write(EMAC_TXTEARDOWN, 0); + emac_txch_teardown(priv, ch); + txch->teardown_pending = 0; + emac_write(EMAC_TXINTMASKCLEAR, BIT(ch)); + } +} + +/** + * emac_tx_bdproc: TX buffer descriptor (packet) processing + * @priv: The DaVinci EMAC private adapter structure + * @ch: TX channel number to process buffer descriptors for + * @budget: number of packets allowed to process + * @pending: indication to caller that packets are pending to process + * + * Processes TX buffer descriptors after packets are transmitted - checks + * ownership bit on the TX * descriptor and requeues it to free pool & frees + * the SKB buffer. Only "budget" number of packets are processed and + * indication of pending packets provided to the caller + * + * Returns number of packets processed + */ +static int emac_tx_bdproc(struct emac_priv *priv, u32 ch, u32 budget) +{ + struct device *emac_dev = &priv->ndev->dev; + unsigned long flags; + u32 frame_status; + u32 pkts_processed = 0; + u32 tx_complete_cnt = 0; + struct emac_tx_bd __iomem *curr_bd; + struct emac_txch *txch = priv->txch[ch]; + u32 *tx_complete_ptr = txch->tx_complete; + + if (unlikely(1 == txch->teardown_pending)) { + if (netif_msg_tx_err(priv) && net_ratelimit()) { + dev_err(emac_dev, "DaVinci EMAC:emac_tx_bdproc: "\ + "teardown pending\n"); + } + return 0; /* dont handle any pkt completions */ + } + + ++txch->proc_count; + spin_lock_irqsave(&priv->tx_lock, flags); + curr_bd = txch->active_queue_head; + if (NULL == curr_bd) { + emac_write(EMAC_TXCP(ch), + emac_virt_to_phys(txch->last_hw_bdprocessed)); + txch->no_active_pkts++; + spin_unlock_irqrestore(&priv->tx_lock, flags); + return 0; + } + BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); + frame_status = curr_bd->mode; + while ((curr_bd) && + ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) && + (pkts_processed < budget)) { + emac_write(EMAC_TXCP(ch), emac_virt_to_phys(curr_bd)); + txch->active_queue_head = curr_bd->next; + if (frame_status & EMAC_CPPI_EOQ_BIT) { + if (curr_bd->next) { /* misqueued packet */ + emac_write(EMAC_TXHDP(ch), curr_bd->h_next); + ++txch->mis_queued_packets; + } else { + txch->queue_active = 0; /* end of queue */ + } + } + *tx_complete_ptr = (u32) curr_bd->buf_token; + ++tx_complete_ptr; + ++tx_complete_cnt; + curr_bd->next = txch->bd_pool_head; + txch->bd_pool_head = curr_bd; + --txch->active_queue_count; + pkts_processed++; + txch->last_hw_bdprocessed = curr_bd; + curr_bd = txch->active_queue_head; + if (curr_bd) { + BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); + frame_status = curr_bd->mode; + } + } /* end of pkt processing loop */ + + emac_net_tx_complete(priv, + (void *)&txch->tx_complete[0], + tx_complete_cnt, ch); + spin_unlock_irqrestore(&priv->tx_lock, flags); + return pkts_processed; +} + +#define EMAC_ERR_TX_OUT_OF_BD -1 + +/** + * emac_send: EMAC Transmit function (internal) + * @priv: The DaVinci EMAC private adapter structure + * @pkt: packet pointer (contains skb ptr) + * @ch: TX channel number + * + * Called by the transmit function to queue the packet in EMAC hardware queue + * + * Returns success(0) or error code (typically out of desc's) + */ +static int emac_send(struct emac_priv *priv, struct emac_netpktobj *pkt, u32 ch) +{ + unsigned long flags; + struct emac_tx_bd __iomem *curr_bd; + struct emac_txch *txch; + struct emac_netbufobj *buf_list; + + txch = priv->txch[ch]; + buf_list = pkt->buf_list; /* get handle to the buffer array */ + + /* check packet size and pad if short */ + if (pkt->pkt_length < EMAC_DEF_MIN_ETHPKTSIZE) { + buf_list->length += (EMAC_DEF_MIN_ETHPKTSIZE - pkt->pkt_length); + pkt->pkt_length = EMAC_DEF_MIN_ETHPKTSIZE; + } + + spin_lock_irqsave(&priv->tx_lock, flags); + curr_bd = txch->bd_pool_head; + if (curr_bd == NULL) { + txch->out_of_tx_bd++; + spin_unlock_irqrestore(&priv->tx_lock, flags); + return EMAC_ERR_TX_OUT_OF_BD; + } + + txch->bd_pool_head = curr_bd->next; + curr_bd->buf_token = buf_list->buf_token; + /* FIXME buff_ptr = dma_map_single(... data_ptr ...) */ + curr_bd->buff_ptr = virt_to_phys(buf_list->data_ptr); + curr_bd->off_b_len = buf_list->length; + curr_bd->h_next = 0; + curr_bd->next = NULL; + curr_bd->mode = (EMAC_CPPI_SOP_BIT | EMAC_CPPI_OWNERSHIP_BIT | + EMAC_CPPI_EOP_BIT | pkt->pkt_length); + + /* flush the packet from cache if write back cache is present */ + BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); + + /* send the packet */ + if (txch->active_queue_head == NULL) { + txch->active_queue_head = curr_bd; + txch->active_queue_tail = curr_bd; + if (1 != txch->queue_active) { + emac_write(EMAC_TXHDP(ch), + emac_virt_to_phys(curr_bd)); + txch->queue_active = 1; + } + ++txch->queue_reinit; + } else { + register struct emac_tx_bd __iomem *tail_bd; + register u32 frame_status; + + tail_bd = txch->active_queue_tail; + tail_bd->next = curr_bd; + txch->active_queue_tail = curr_bd; + tail_bd = EMAC_VIRT_NOCACHE(tail_bd); + tail_bd->h_next = (int)emac_virt_to_phys(curr_bd); + frame_status = tail_bd->mode; + if (frame_status & EMAC_CPPI_EOQ_BIT) { + emac_write(EMAC_TXHDP(ch), emac_virt_to_phys(curr_bd)); + frame_status &= ~(EMAC_CPPI_EOQ_BIT); + tail_bd->mode = frame_status; + ++txch->end_of_queue_add; + } + } + txch->active_queue_count++; + spin_unlock_irqrestore(&priv->tx_lock, flags); + return 0; +} + +/** + * emac_dev_xmit: EMAC Transmit function + * @skb: SKB pointer + * @ndev: The DaVinci EMAC network adapter + * + * Called by the system to transmit a packet - we queue the packet in + * EMAC hardware transmit queue + * + * Returns success(NETDEV_TX_OK) or error code (typically out of desc's) + */ +static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct device *emac_dev = &ndev->dev; + int ret_code; + struct emac_netbufobj tx_buf; /* buffer obj-only single frame support */ + struct emac_netpktobj tx_packet; /* packet object */ + struct emac_priv *priv = netdev_priv(ndev); + + /* If no link, return */ + if (unlikely(!priv->link)) { + if (netif_msg_tx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "DaVinci EMAC: No link to transmit"); + return NETDEV_TX_BUSY; + } + + /* Build the buffer and packet objects - Since only single fragment is + * supported, need not set length and token in both packet & object. + * Doing so for completeness sake & to show that this needs to be done + * in multifragment case + */ + tx_packet.buf_list = &tx_buf; + tx_packet.num_bufs = 1; /* only single fragment supported */ + tx_packet.pkt_length = skb->len; + tx_packet.pkt_token = (void *)skb; + tx_buf.length = skb->len; + tx_buf.buf_token = (void *)skb; + tx_buf.data_ptr = skb->data; + EMAC_CACHE_WRITEBACK((unsigned long)skb->data, skb->len); + ndev->trans_start = jiffies; + ret_code = emac_send(priv, &tx_packet, EMAC_DEF_TX_CH); + if (unlikely(ret_code != 0)) { + if (ret_code == EMAC_ERR_TX_OUT_OF_BD) { + if (netif_msg_tx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "DaVinci EMAC: xmit() fatal"\ + " err. Out of TX BD's"); + netif_stop_queue(priv->ndev); + } + priv->net_dev_stats.tx_dropped++; + return NETDEV_TX_BUSY; + } + + return NETDEV_TX_OK; +} + +/** + * emac_dev_tx_timeout: EMAC Transmit timeout function + * @ndev: The DaVinci EMAC network adapter + * + * Called when system detects that a skb timeout period has expired + * potentially due to a fault in the adapter in not being able to send + * it out on the wire. We teardown the TX channel assuming a hardware + * error and re-initialize the TX channel for hardware operation + * + */ +static void emac_dev_tx_timeout(struct net_device *ndev) +{ + struct emac_priv *priv = netdev_priv(ndev); + struct device *emac_dev = &ndev->dev; + + if (netif_msg_tx_err(priv)) + dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX"); + + priv->net_dev_stats.tx_errors++; + emac_int_disable(priv); + emac_stop_txch(priv, EMAC_DEF_TX_CH); + emac_cleanup_txch(priv, EMAC_DEF_TX_CH); + emac_init_txch(priv, EMAC_DEF_TX_CH); + emac_write(EMAC_TXHDP(0), 0); + emac_write(EMAC_TXINTMASKSET, BIT(EMAC_DEF_TX_CH)); + emac_int_enable(priv); +} + +/** + * emac_net_alloc_rx_buf: Allocate a skb for RX + * @priv: The DaVinci EMAC private adapter structure + * @buf_size: size of SKB data buffer to allocate + * @data_token: data token returned (skb handle for storing in buffer desc) + * @ch: RX channel number + * + * Called during RX channel setup - allocates skb buffer of required size + * and provides the skb handle and allocated buffer data pointer to caller + * + * Returns skb data pointer or 0 on failure to alloc skb + */ +static void *emac_net_alloc_rx_buf(struct emac_priv *priv, int buf_size, + void **data_token, u32 ch) +{ + struct net_device *ndev = priv->ndev; + struct device *emac_dev = &ndev->dev; + struct sk_buff *p_skb; + + p_skb = dev_alloc_skb(buf_size); + if (unlikely(NULL == p_skb)) { + if (netif_msg_rx_err(priv) && net_ratelimit()) + dev_err(emac_dev, "DaVinci EMAC: failed to alloc skb"); + return NULL; + } + + /* set device pointer in skb and reserve space for extra bytes */ + p_skb->dev = ndev; + skb_reserve(p_skb, NET_IP_ALIGN); + *data_token = (void *) p_skb; + EMAC_CACHE_WRITEBACK_INVALIDATE((unsigned long)p_skb->data, buf_size); + return p_skb->data; +} + +/** + * emac_init_rxch: RX channel initialization + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @param: mac address for RX channel + * + * Called during device init to setup a RX channel (allocate buffers and + * buffer descriptors, create queue and keep ready for reception + * + * Returns success(0) or mem alloc failures error code + */ +static int emac_init_rxch(struct emac_priv *priv, u32 ch, char *param) +{ + struct device *emac_dev = &priv->ndev->dev; + u32 cnt, bd_size; + void __iomem *mem; + struct emac_rx_bd __iomem *curr_bd; + struct emac_rxch *rxch = NULL; + + rxch = kzalloc(sizeof(struct emac_rxch), GFP_KERNEL); + if (NULL == rxch) { + dev_err(emac_dev, "DaVinci EMAC: RX Ch mem alloc failed"); + return -ENOMEM; + } + priv->rxch[ch] = rxch; + rxch->buf_size = priv->rx_buf_size; + rxch->service_max = EMAC_DEF_RX_MAX_SERVICE; + rxch->queue_active = 0; + rxch->teardown_pending = 0; + + /* save mac address */ + for (cnt = 0; cnt < 6; cnt++) + rxch->mac_addr[cnt] = param[cnt]; + + /* allocate buffer descriptor pool align every BD on four word + * boundry for future requirements */ + bd_size = (sizeof(struct emac_rx_bd) + 0xF) & ~0xF; + rxch->num_bd = (priv->ctrl_ram_size >> 1) / bd_size; + rxch->alloc_size = (((bd_size * rxch->num_bd) + 0xF) & ~0xF); + rxch->bd_mem = EMAC_RX_BD_MEM(priv); + __memzero((void __force *)rxch->bd_mem, rxch->alloc_size); + rxch->pkt_queue.buf_list = &rxch->buf_queue; + + /* allocate RX buffer and initialize the BD linked list */ + mem = (void __force __iomem *) + (((u32 __force) rxch->bd_mem + 0xF) & ~0xF); + rxch->active_queue_head = NULL; + rxch->active_queue_tail = mem; + for (cnt = 0; cnt < rxch->num_bd; cnt++) { + curr_bd = mem + (cnt * bd_size); + /* for future use the last parameter contains the BD ptr */ + curr_bd->data_ptr = emac_net_alloc_rx_buf(priv, + rxch->buf_size, + (void __force **)&curr_bd->buf_token, + EMAC_DEF_RX_CH); + if (curr_bd->data_ptr == NULL) { + dev_err(emac_dev, "DaVinci EMAC: RX buf mem alloc " \ + "failed for ch %d\n", ch); + kfree(rxch); + return -ENOMEM; + } + + /* populate the hardware descriptor */ + curr_bd->h_next = emac_virt_to_phys(rxch->active_queue_head); + /* FIXME buff_ptr = dma_map_single(... data_ptr ...) */ + curr_bd->buff_ptr = virt_to_phys(curr_bd->data_ptr); + curr_bd->off_b_len = rxch->buf_size; + curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT; + + /* write back to hardware memory */ + BD_CACHE_WRITEBACK_INVALIDATE((u32) curr_bd, + EMAC_BD_LENGTH_FOR_CACHE); + curr_bd->next = rxch->active_queue_head; + rxch->active_queue_head = curr_bd; + } + + /* At this point rxCppi->activeQueueHead points to the first + RX BD ready to be given to RX HDP and rxch->active_queue_tail + points to the last RX BD + */ + return 0; +} + +/** + * emac_rxch_teardown: RX channel teardown + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * + * Called during device stop to teardown RX channel + * + */ +static void emac_rxch_teardown(struct emac_priv *priv, u32 ch) +{ + struct device *emac_dev = &priv->ndev->dev; + u32 teardown_cnt = 0xFFFFFFF0; /* Some high value */ + + while ((emac_read(EMAC_RXCP(ch)) & EMAC_TEARDOWN_VALUE) != + EMAC_TEARDOWN_VALUE) { + /* wait till tx teardown complete */ + cpu_relax(); /* TODO: check if this helps ... */ + --teardown_cnt; + if (0 == teardown_cnt) { + dev_err(emac_dev, "EMAC: RX teardown aborted\n"); + break; + } + } + emac_write(EMAC_RXCP(ch), EMAC_TEARDOWN_VALUE); +} + +/** + * emac_stop_rxch: Stop RX channel operation + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * + * Called during device stop to stop RX channel operation + * + */ +static void emac_stop_rxch(struct emac_priv *priv, u32 ch) +{ + struct emac_rxch *rxch = priv->rxch[ch]; + + if (rxch) { + rxch->teardown_pending = 1; + emac_write(EMAC_RXTEARDOWN, ch); + /* wait for teardown complete */ + emac_rxch_teardown(priv, ch); + rxch->teardown_pending = 0; + emac_write(EMAC_RXINTMASKCLEAR, BIT(ch)); + } +} + +/** + * emac_cleanup_rxch: Book-keep function to clean RX channel resources + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * + * Called during device stop to clean up RX channel resources + * + */ +static void emac_cleanup_rxch(struct emac_priv *priv, u32 ch) +{ + struct emac_rxch *rxch = priv->rxch[ch]; + struct emac_rx_bd __iomem *curr_bd; + + if (rxch) { + /* free the receive buffers previously allocated */ + curr_bd = rxch->active_queue_head; + while (curr_bd) { + if (curr_bd->buf_token) { + dev_kfree_skb_any((struct sk_buff *)\ + curr_bd->buf_token); + } + curr_bd = curr_bd->next; + } + if (rxch->bd_mem) + rxch->bd_mem = NULL; + kfree(rxch); + priv->rxch[ch] = NULL; + } +} + +/** + * emac_set_type0addr: Set EMAC Type0 mac address + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @mac_addr: MAC address to set in device + * + * Called internally to set Type0 mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr) +{ + u32 val; + val = ((mac_addr[5] << 8) | (mac_addr[4])); + emac_write(EMAC_MACSRCADDRLO, val); + + val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0])); + emac_write(EMAC_MACSRCADDRHI, val); + val = emac_read(EMAC_RXUNICASTSET); + val |= BIT(ch); + emac_write(EMAC_RXUNICASTSET, val); + val = emac_read(EMAC_RXUNICASTCLEAR); + val &= ~BIT(ch); + emac_write(EMAC_RXUNICASTCLEAR, val); +} + +/** + * emac_set_type1addr: Set EMAC Type1 mac address + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @mac_addr: MAC address to set in device + * + * Called internally to set Type1 mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr) +{ + u32 val; + emac_write(EMAC_MACINDEX, ch); + val = ((mac_addr[5] << 8) | mac_addr[4]); + emac_write(EMAC_MACADDRLO, val); + val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0])); + emac_write(EMAC_MACADDRHI, val); + emac_set_type0addr(priv, ch, mac_addr); +} + +/** + * emac_set_type2addr: Set EMAC Type2 mac address + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @mac_addr: MAC address to set in device + * @index: index into RX address entries + * @match: match parameter for RX address matching logic + * + * Called internally to set Type2 mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static void emac_set_type2addr(struct emac_priv *priv, u32 ch, + char *mac_addr, int index, int match) +{ + u32 val; + emac_write(EMAC_MACINDEX, index); + val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0])); + emac_write(EMAC_MACADDRHI, val); + val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \ + (match << 19) | BIT(20)); + emac_write(EMAC_MACADDRLO, val); + emac_set_type0addr(priv, ch, mac_addr); +} + +/** + * emac_setmac: Set mac address in the adapter (internal function) + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number + * @mac_addr: MAC address to set in device + * + * Called internally to set the mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr) +{ + struct device *emac_dev = &priv->ndev->dev; + + if (priv->rx_addr_type == 0) { + emac_set_type0addr(priv, ch, mac_addr); + } else if (priv->rx_addr_type == 1) { + u32 cnt; + for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++) + emac_set_type1addr(priv, ch, mac_addr); + } else if (priv->rx_addr_type == 2) { + emac_set_type2addr(priv, ch, mac_addr, ch, 1); + emac_set_type0addr(priv, ch, mac_addr); + } else { + if (netif_msg_drv(priv)) + dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n"); + } +} + +/** + * emac_dev_setmac_addr: Set mac address in the adapter + * @ndev: The DaVinci EMAC network adapter + * @addr: MAC address to set in device + * + * Called by the system to set the mac address of the adapter (Device) + * + * Returns success (0) or appropriate error code (none as of now) + */ +static int emac_dev_setmac_addr(struct net_device *ndev, void *addr) +{ + struct emac_priv *priv = netdev_priv(ndev); + struct emac_rxch *rxch = priv->rxch[EMAC_DEF_RX_CH]; + struct device *emac_dev = &priv->ndev->dev; + struct sockaddr *sa = addr; + DECLARE_MAC_BUF(mac); + + /* Store mac addr in priv and rx channel and set it in EMAC hw */ + memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len); + memcpy(rxch->mac_addr, sa->sa_data, ndev->addr_len); + memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len); + emac_setmac(priv, EMAC_DEF_RX_CH, rxch->mac_addr); + + if (netif_msg_drv(priv)) + dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %s\n", + print_mac(mac, priv->mac_addr)); + + return 0; +} + +/** + * emac_addbd_to_rx_queue: Recycle RX buffer descriptor + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number to process buffer descriptors for + * @curr_bd: current buffer descriptor + * @buffer: buffer pointer for descriptor + * @buf_token: buffer token (stores skb information) + * + * Prepares the recycled buffer descriptor and addes it to hardware + * receive queue - if queue empty this descriptor becomes the head + * else addes the descriptor to end of queue + * + */ +static void emac_addbd_to_rx_queue(struct emac_priv *priv, u32 ch, + struct emac_rx_bd __iomem *curr_bd, + char *buffer, void *buf_token) +{ + struct emac_rxch *rxch = priv->rxch[ch]; + + /* populate the hardware descriptor */ + curr_bd->h_next = 0; + /* FIXME buff_ptr = dma_map_single(... buffer ...) */ + curr_bd->buff_ptr = virt_to_phys(buffer); + curr_bd->off_b_len = rxch->buf_size; + curr_bd->mode = EMAC_CPPI_OWNERSHIP_BIT; + curr_bd->next = NULL; + curr_bd->data_ptr = buffer; + curr_bd->buf_token = buf_token; + + /* write back */ + BD_CACHE_WRITEBACK_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); + if (rxch->active_queue_head == NULL) { + rxch->active_queue_head = curr_bd; + rxch->active_queue_tail = curr_bd; + if (0 != rxch->queue_active) { + emac_write(EMAC_RXHDP(ch), + emac_virt_to_phys(rxch->active_queue_head)); + rxch->queue_active = 1; + } + } else { + struct emac_rx_bd __iomem *tail_bd; + u32 frame_status; + + tail_bd = rxch->active_queue_tail; + rxch->active_queue_tail = curr_bd; + tail_bd->next = curr_bd; + tail_bd = EMAC_VIRT_NOCACHE(tail_bd); + tail_bd->h_next = emac_virt_to_phys(curr_bd); + frame_status = tail_bd->mode; + if (frame_status & EMAC_CPPI_EOQ_BIT) { + emac_write(EMAC_RXHDP(ch), + emac_virt_to_phys(curr_bd)); + frame_status &= ~(EMAC_CPPI_EOQ_BIT); + tail_bd->mode = frame_status; + ++rxch->end_of_queue_add; + } + } + ++rxch->recycled_bd; +} + +/** + * emac_net_rx_cb: Prepares packet and sends to upper layer + * @priv: The DaVinci EMAC private adapter structure + * @net_pkt_list: Network packet list (received packets) + * + * Invalidates packet buffer memory and sends the received packet to upper + * layer + * + * Returns success or appropriate error code (none as of now) + */ +static int emac_net_rx_cb(struct emac_priv *priv, + struct emac_netpktobj *net_pkt_list) +{ + struct sk_buff *p_skb; + p_skb = (struct sk_buff *)net_pkt_list->pkt_token; + /* set length of packet */ + skb_put(p_skb, net_pkt_list->pkt_length); + EMAC_CACHE_INVALIDATE((unsigned long)p_skb->data, p_skb->len); + p_skb->protocol = eth_type_trans(p_skb, priv->ndev); + p_skb->dev->last_rx = jiffies; + netif_receive_skb(p_skb); + priv->net_dev_stats.rx_bytes += net_pkt_list->pkt_length; + priv->net_dev_stats.rx_packets++; + return 0; +} + +/** + * emac_rx_bdproc: RX buffer descriptor (packet) processing + * @priv: The DaVinci EMAC private adapter structure + * @ch: RX channel number to process buffer descriptors for + * @budget: number of packets allowed to process + * @pending: indication to caller that packets are pending to process + * + * Processes RX buffer descriptors - checks ownership bit on the RX buffer + * descriptor, sends the receive packet to upper layer, allocates a new SKB + * and recycles the buffer descriptor (requeues it in hardware RX queue). + * Only "budget" number of packets are processed and indication of pending + * packets provided to the caller. + * + * Returns number of packets processed (and indication of pending packets) + */ +static int emac_rx_bdproc(struct emac_priv *priv, u32 ch, u32 budget) +{ + unsigned long flags; + u32 frame_status; + u32 pkts_processed = 0; + char *new_buffer; + struct emac_rx_bd __iomem *curr_bd; + struct emac_rx_bd __iomem *last_bd; + struct emac_netpktobj *curr_pkt, pkt_obj; + struct emac_netbufobj buf_obj; + struct emac_netbufobj *rx_buf_obj; + void *new_buf_token; + struct emac_rxch *rxch = priv->rxch[ch]; + + if (unlikely(1 == rxch->teardown_pending)) + return 0; + ++rxch->proc_count; + spin_lock_irqsave(&priv->rx_lock, flags); + pkt_obj.buf_list = &buf_obj; + curr_pkt = &pkt_obj; + curr_bd = rxch->active_queue_head; + BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); + frame_status = curr_bd->mode; + + while ((curr_bd) && + ((frame_status & EMAC_CPPI_OWNERSHIP_BIT) == 0) && + (pkts_processed < budget)) { + + new_buffer = emac_net_alloc_rx_buf(priv, rxch->buf_size, + &new_buf_token, EMAC_DEF_RX_CH); + if (unlikely(NULL == new_buffer)) { + ++rxch->out_of_rx_buffers; + goto end_emac_rx_bdproc; + } + + /* populate received packet data structure */ + rx_buf_obj = &curr_pkt->buf_list[0]; + rx_buf_obj->data_ptr = (char *)curr_bd->data_ptr; + rx_buf_obj->length = curr_bd->off_b_len & EMAC_RX_BD_BUF_SIZE; + rx_buf_obj->buf_token = curr_bd->buf_token; + curr_pkt->pkt_token = curr_pkt->buf_list->buf_token; + curr_pkt->num_bufs = 1; + curr_pkt->pkt_length = + (frame_status & EMAC_RX_BD_PKT_LENGTH_MASK); + emac_write(EMAC_RXCP(ch), emac_virt_to_phys(curr_bd)); + ++rxch->processed_bd; + last_bd = curr_bd; + curr_bd = last_bd->next; + rxch->active_queue_head = curr_bd; + + /* check if end of RX queue ? */ + if (frame_status & EMAC_CPPI_EOQ_BIT) { + if (curr_bd) { + ++rxch->mis_queued_packets; + emac_write(EMAC_RXHDP(ch), + emac_virt_to_phys(curr_bd)); + } else { + ++rxch->end_of_queue; + rxch->queue_active = 0; + } + } + + /* recycle BD */ + emac_addbd_to_rx_queue(priv, ch, last_bd, new_buffer, + new_buf_token); + + /* return the packet to the user - BD ptr passed in + * last parameter for potential *future* use */ + spin_unlock_irqrestore(&priv->rx_lock, flags); + emac_net_rx_cb(priv, curr_pkt); + spin_lock_irqsave(&priv->rx_lock, flags); + curr_bd = rxch->active_queue_head; + if (curr_bd) { + BD_CACHE_INVALIDATE(curr_bd, EMAC_BD_LENGTH_FOR_CACHE); + frame_status = curr_bd->mode; + } + ++pkts_processed; + } + +end_emac_rx_bdproc: + spin_unlock_irqrestore(&priv->rx_lock, flags); + return pkts_processed; +} + +/** + * emac_hw_enable: Enable EMAC hardware for packet transmission/reception + * @priv: The DaVinci EMAC private adapter structure + * + * Enables EMAC hardware for packet processing - enables PHY, enables RX + * for packet reception and enables device interrupts and then NAPI + * + * Returns success (0) or appropriate error code (none right now) + */ +static int emac_hw_enable(struct emac_priv *priv) +{ + u32 ch, val, mbp_enable, mac_control; + + /* Soft reset */ + emac_write(EMAC_SOFTRESET, 1); + while (emac_read(EMAC_SOFTRESET)) + cpu_relax(); + + /* Disable interrupt & Set pacing for more interrupts initially */ + emac_int_disable(priv); + + /* Full duplex enable bit set when auto negotiation happens */ + mac_control = + (((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) | + ((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) | + ((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) | + ((priv->duplex == DUPLEX_FULL) ? 0x1 : 0)); + emac_write(EMAC_MACCONTROL, mac_control); + + mbp_enable = + (((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) | + ((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) | + ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) | + ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) | + ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) | + ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) | + ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) | + ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \ + EMAC_RXMBP_PROMCH_SHIFT) | + ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) | + ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \ + EMAC_RXMBP_BROADCH_SHIFT) | + ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) | + ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \ + EMAC_RXMBP_MULTICH_SHIFT)); + emac_write(EMAC_RXMBPENABLE, mbp_enable); + emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE & + EMAC_RX_MAX_LEN_MASK)); + emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET & + EMAC_RX_BUFFER_OFFSET_MASK)); + emac_write(EMAC_RXFILTERLOWTHRESH, 0); + emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL); + priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF; + + val = emac_read(EMAC_TXCONTROL); + val |= EMAC_TX_CONTROL_TX_ENABLE_VAL; + emac_write(EMAC_TXCONTROL, val); + val = emac_read(EMAC_RXCONTROL); + val |= EMAC_RX_CONTROL_RX_ENABLE_VAL; + emac_write(EMAC_RXCONTROL, val); + emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL); + + for (ch = 0; ch < EMAC_DEF_MAX_TX_CH; ch++) { + emac_write(EMAC_TXHDP(ch), 0); + emac_write(EMAC_TXINTMASKSET, BIT(ch)); + } + for (ch = 0; ch < EMAC_DEF_MAX_RX_CH; ch++) { + struct emac_rxch *rxch = priv->rxch[ch]; + emac_setmac(priv, ch, rxch->mac_addr); + emac_write(EMAC_RXINTMASKSET, BIT(ch)); + rxch->queue_active = 1; + emac_write(EMAC_RXHDP(ch), + emac_virt_to_phys(rxch->active_queue_head)); + } + + /* Enable MII */ + val = emac_read(EMAC_MACCONTROL); + val |= (EMAC_MACCONTROL_MIIEN); + emac_write(EMAC_MACCONTROL, val); + + /* Enable NAPI and interrupts */ + napi_enable(&priv->napi); + emac_int_enable(priv); + return 0; + +} + +/** + * emac_poll: EMAC NAPI Poll function + * @ndev: The DaVinci EMAC network adapter + * @budget: Number of receive packets to process (as told by NAPI layer) + * + * NAPI Poll function implemented to process packets as per budget. We check + * the type of interrupt on the device and accordingly call the TX or RX + * packet processing functions. We follow the budget for RX processing and + * also put a cap on number of TX pkts processed through config param. The + * NAPI schedule function is called if more packets pending. + * + * Returns number of packets received (in most cases; else TX pkts - rarely) + */ +static int emac_poll(struct napi_struct *napi, int budget) +{ + unsigned int mask; + struct emac_priv *priv = container_of(napi, struct emac_priv, napi); + struct net_device *ndev = priv->ndev; + struct device *emac_dev = &ndev->dev; + u32 status = 0; + u32 num_pkts = 0; + + if (!netif_running(ndev)) + return 0; + + /* Check interrupt vectors and call packet processing */ + status = emac_read(EMAC_MACINVECTOR); + + mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC; + + if (priv->version == EMAC_VERSION_2) + mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC; + + if (status & mask) { + num_pkts = emac_tx_bdproc(priv, EMAC_DEF_TX_CH, + EMAC_DEF_TX_MAX_SERVICE); + } /* TX processing */ + + if (num_pkts) + return budget; + + mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC; + + if (priv->version == EMAC_VERSION_2) + mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC; + + if (status & mask) { + num_pkts = emac_rx_bdproc(priv, EMAC_DEF_RX_CH, budget); + } /* RX processing */ + + if (num_pkts < budget) { + napi_complete(napi); + emac_int_enable(priv); + } + + if (unlikely(status & EMAC_DM644X_MAC_IN_VECTOR_HOST_INT)) { + u32 ch, cause; + dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n"); + netif_stop_queue(ndev); + napi_disable(&priv->napi); + + status = emac_read(EMAC_MACSTATUS); + cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >> + EMAC_MACSTATUS_TXERRCODE_SHIFT); + if (cause) { + ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >> + EMAC_MACSTATUS_TXERRCH_SHIFT); + if (net_ratelimit()) { + dev_err(emac_dev, "TX Host error %s on ch=%d\n", + &emac_txhost_errcodes[cause][0], ch); + } + } + cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >> + EMAC_MACSTATUS_RXERRCODE_SHIFT); + if (cause) { + ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >> + EMAC_MACSTATUS_RXERRCH_SHIFT); + if (netif_msg_hw(priv) && net_ratelimit()) + dev_err(emac_dev, "RX Host error %s on ch=%d\n", + &emac_rxhost_errcodes[cause][0], ch); + } + } /* Host error processing */ + + return num_pkts; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * emac_poll_controller: EMAC Poll controller function + * @ndev: The DaVinci EMAC network adapter + * + * Polled functionality used by netconsole and others in non interrupt mode + * + */ +void emac_poll_controller(struct net_device *ndev) +{ + struct emac_priv *priv = netdev_priv(ndev); + + emac_int_disable(priv); + emac_irq(ndev->irq, priv); + emac_int_enable(priv); +} +#endif + +/* PHY/MII bus related */ + +/* Wait until mdio is ready for next command */ +#define MDIO_WAIT_FOR_USER_ACCESS\ + while ((emac_mdio_read((MDIO_USERACCESS(0))) &\ + MDIO_USERACCESS_GO) != 0) + +static int emac_mii_read(struct mii_bus *bus, int phy_id, int phy_reg) +{ + unsigned int phy_data = 0; + unsigned int phy_control; + + /* Wait until mdio is ready for next command */ + MDIO_WAIT_FOR_USER_ACCESS; + + phy_control = (MDIO_USERACCESS_GO | + MDIO_USERACCESS_READ | + ((phy_reg << 21) & MDIO_USERACCESS_REGADR) | + ((phy_id << 16) & MDIO_USERACCESS_PHYADR) | + (phy_data & MDIO_USERACCESS_DATA)); + emac_mdio_write(MDIO_USERACCESS(0), phy_control); + + /* Wait until mdio is ready for next command */ + MDIO_WAIT_FOR_USER_ACCESS; + + return emac_mdio_read(MDIO_USERACCESS(0)) & MDIO_USERACCESS_DATA; + +} + +static int emac_mii_write(struct mii_bus *bus, int phy_id, + int phy_reg, u16 phy_data) +{ + + unsigned int control; + + /* until mdio is ready for next command */ + MDIO_WAIT_FOR_USER_ACCESS; + + control = (MDIO_USERACCESS_GO | + MDIO_USERACCESS_WRITE | + ((phy_reg << 21) & MDIO_USERACCESS_REGADR) | + ((phy_id << 16) & MDIO_USERACCESS_PHYADR) | + (phy_data & MDIO_USERACCESS_DATA)); + emac_mdio_write(MDIO_USERACCESS(0), control); + + return 0; +} + +static int emac_mii_reset(struct mii_bus *bus) +{ + unsigned int clk_div; + int mdio_bus_freq = emac_bus_frequency; + + if (mdio_max_freq & mdio_bus_freq) + clk_div = ((mdio_bus_freq / mdio_max_freq) - 1); + else + clk_div = 0xFF; + + clk_div &= MDIO_CONTROL_CLKDIV; + + /* Set enable and clock divider in MDIOControl */ + emac_mdio_write(MDIO_CONTROL, (clk_div | MDIO_CONTROL_ENABLE)); + + return 0; + +} + +static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, PHY_POLL }; + +/* emac_driver: EMAC MII bus structure */ + +static struct mii_bus *emac_mii; + +static void emac_adjust_link(struct net_device *ndev) +{ + struct emac_priv *priv = netdev_priv(ndev); + struct phy_device *phydev = priv->phydev; + unsigned long flags; + int new_state = 0; + + spin_lock_irqsave(&priv->lock, flags); + + if (phydev->link) { + /* check the mode of operation - full/half duplex */ + if (phydev->duplex != priv->duplex) { + new_state = 1; + priv->duplex = phydev->duplex; + } + if (phydev->speed != priv->speed) { + new_state = 1; + priv->speed = phydev->speed; + } + if (!priv->link) { + new_state = 1; + priv->link = 1; + } + + } else if (priv->link) { + new_state = 1; + priv->link = 0; + priv->speed = 0; + priv->duplex = ~0; + } + if (new_state) { + emac_update_phystatus(priv); + phy_print_status(priv->phydev); + } + + spin_unlock_irqrestore(&priv->lock, flags); +} + +/************************************************************************* + * Linux Driver Model + *************************************************************************/ + +/** + * emac_devioctl: EMAC adapter ioctl + * @ndev: The DaVinci EMAC network adapter + * @ifrq: request parameter + * @cmd: command parameter + * + * EMAC driver ioctl function + * + * Returns success(0) or appropriate error code + */ +static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) +{ + dev_warn(&ndev->dev, "DaVinci EMAC: ioctl not supported\n"); + + if (!(netif_running(ndev))) + return -EINVAL; + + /* TODO: Add phy read and write and private statistics get feature */ + + return -EOPNOTSUPP; +} + +/** + * emac_dev_open: EMAC device open + * @ndev: The DaVinci EMAC network adapter + * + * Called when system wants to start the interface. We init TX/RX channels + * and enable the hardware for packet reception/transmission and start the + * network queue. + * + * Returns 0 for a successful open, or appropriate error code + */ +static int emac_dev_open(struct net_device *ndev) +{ + struct device *emac_dev = &ndev->dev; + u32 rc, cnt, ch; + int phy_addr; + struct resource *res; + int q, m; + int i = 0; + int k = 0; + struct emac_priv *priv = netdev_priv(ndev); + + netif_carrier_off(ndev); + for (cnt = 0; cnt <= ETH_ALEN; cnt++) + ndev->dev_addr[cnt] = priv->mac_addr[cnt]; + + /* Configuration items */ + priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN; + + /* Clear basic hardware */ + for (ch = 0; ch < EMAC_MAX_TXRX_CHANNELS; ch++) { + emac_write(EMAC_TXHDP(ch), 0); + emac_write(EMAC_RXHDP(ch), 0); + emac_write(EMAC_RXHDP(ch), 0); + emac_write(EMAC_RXINTMASKCLEAR, EMAC_INT_MASK_CLEAR); + emac_write(EMAC_TXINTMASKCLEAR, EMAC_INT_MASK_CLEAR); + } + priv->mac_hash1 = 0; + priv->mac_hash2 = 0; + emac_write(EMAC_MACHASH1, 0); + emac_write(EMAC_MACHASH2, 0); + + /* multi ch not supported - open 1 TX, 1RX ch by default */ + rc = emac_init_txch(priv, EMAC_DEF_TX_CH); + if (0 != rc) { + dev_err(emac_dev, "DaVinci EMAC: emac_init_txch() failed"); + return rc; + } + rc = emac_init_rxch(priv, EMAC_DEF_RX_CH, priv->mac_addr); + if (0 != rc) { + dev_err(emac_dev, "DaVinci EMAC: emac_init_rxch() failed"); + return rc; + } + + /* Request IRQ */ + + while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) { + for (i = res->start; i <= res->end; i++) { + if (request_irq(i, emac_irq, IRQF_DISABLED, + ndev->name, ndev)) + goto rollback; + } + k++; + } + + /* Start/Enable EMAC hardware */ + emac_hw_enable(priv); + + /* find the first phy */ + priv->phydev = NULL; + if (priv->phy_mask) { + emac_mii_reset(priv->mii_bus); + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + if (priv->mii_bus->phy_map[phy_addr]) { + priv->phydev = priv->mii_bus->phy_map[phy_addr]; + break; + } + } + + if (!priv->phydev) { + printk(KERN_ERR "%s: no PHY found\n", ndev->name); + return -1; + } + + priv->phydev = phy_connect(ndev, dev_name(&priv->phydev->dev), + &emac_adjust_link, 0, PHY_INTERFACE_MODE_MII); + + if (IS_ERR(priv->phydev)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", + ndev->name); + return PTR_ERR(priv->phydev); + } + + priv->link = 0; + priv->speed = 0; + priv->duplex = ~0; + + printk(KERN_INFO "%s: attached PHY driver [%s] " + "(mii_bus:phy_addr=%s, id=%x)\n", ndev->name, + priv->phydev->drv->name, dev_name(&priv->phydev->dev), + priv->phydev->phy_id); + } else{ + /* No PHY , fix the link, speed and duplex settings */ + priv->link = 1; + priv->speed = SPEED_100; + priv->duplex = DUPLEX_FULL; + emac_update_phystatus(priv); + } + + if (!netif_running(ndev)) /* debug only - to avoid compiler warning */ + emac_dump_regs(priv); + + if (netif_msg_drv(priv)) + dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name); + + if (priv->phy_mask) + phy_start(priv->phydev); + + return 0; + +rollback: + + dev_err(emac_dev, "DaVinci EMAC: request_irq() failed"); + + for (q = k; k >= 0; k--) { + for (m = i; m >= res->start; m--) + free_irq(m, ndev); + res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1); + m = res->end; + } + return -EBUSY; +} + +/** + * emac_dev_stop: EMAC device stop + * @ndev: The DaVinci EMAC network adapter + * + * Called when system wants to stop or down the interface. We stop the network + * queue, disable interrupts and cleanup TX/RX channels. + * + * We return the statistics in net_device_stats structure pulled from emac + */ +static int emac_dev_stop(struct net_device *ndev) +{ + struct resource *res; + int i = 0; + int irq_num; + struct emac_priv *priv = netdev_priv(ndev); + struct device *emac_dev = &ndev->dev; + + /* inform the upper layers. */ + netif_stop_queue(ndev); + napi_disable(&priv->napi); + + netif_carrier_off(ndev); + emac_int_disable(priv); + emac_stop_txch(priv, EMAC_DEF_TX_CH); + emac_stop_rxch(priv, EMAC_DEF_RX_CH); + emac_cleanup_txch(priv, EMAC_DEF_TX_CH); + emac_cleanup_rxch(priv, EMAC_DEF_RX_CH); + emac_write(EMAC_SOFTRESET, 1); + + if (priv->phydev) + phy_disconnect(priv->phydev); + + /* Free IRQ */ + while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) { + for (irq_num = res->start; irq_num <= res->end; irq_num++) + free_irq(irq_num, priv->ndev); + i++; + } + + if (netif_msg_drv(priv)) + dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name); + + return 0; +} + +/** + * emac_dev_getnetstats: EMAC get statistics function + * @ndev: The DaVinci EMAC network adapter + * + * Called when system wants to get statistics from the device. + * + * We return the statistics in net_device_stats structure pulled from emac + */ +static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev) +{ + struct emac_priv *priv = netdev_priv(ndev); + + /* update emac hardware stats and reset the registers*/ + + priv->net_dev_stats.multicast += emac_read(EMAC_RXMCASTFRAMES); + emac_write(EMAC_RXMCASTFRAMES, EMAC_ALL_MULTI_REG_VALUE); + + priv->net_dev_stats.collisions += (emac_read(EMAC_TXCOLLISION) + + emac_read(EMAC_TXSINGLECOLL) + + emac_read(EMAC_TXMULTICOLL)); + emac_write(EMAC_TXCOLLISION, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_TXSINGLECOLL, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_TXMULTICOLL, EMAC_ALL_MULTI_REG_VALUE); + + priv->net_dev_stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) + + emac_read(EMAC_RXJABBER) + + emac_read(EMAC_RXUNDERSIZED)); + emac_write(EMAC_RXOVERSIZED, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXJABBER, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXUNDERSIZED, EMAC_ALL_MULTI_REG_VALUE); + + priv->net_dev_stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) + + emac_read(EMAC_RXMOFOVERRUNS)); + emac_write(EMAC_RXSOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); + emac_write(EMAC_RXMOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); + + priv->net_dev_stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS); + emac_write(EMAC_RXDMAOVERRUNS, EMAC_ALL_MULTI_REG_VALUE); + + priv->net_dev_stats.tx_carrier_errors += + emac_read(EMAC_TXCARRIERSENSE); + emac_write(EMAC_TXCARRIERSENSE, EMAC_ALL_MULTI_REG_VALUE); + + priv->net_dev_stats.tx_fifo_errors = emac_read(EMAC_TXUNDERRUN); + emac_write(EMAC_TXUNDERRUN, EMAC_ALL_MULTI_REG_VALUE); + + return &priv->net_dev_stats; +} + +static const struct net_device_ops emac_netdev_ops = { + .ndo_open = emac_dev_open, + .ndo_stop = emac_dev_stop, + .ndo_start_xmit = emac_dev_xmit, + .ndo_set_multicast_list = emac_dev_mcast_set, + .ndo_set_mac_address = emac_dev_setmac_addr, + .ndo_do_ioctl = emac_devioctl, + .ndo_tx_timeout = emac_dev_tx_timeout, + .ndo_get_stats = emac_dev_getnetstats, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = emac_poll_controller, +#endif +}; + +/** + * davinci_emac_probe: EMAC device probe + * @pdev: The DaVinci EMAC device that we are removing + * + * Called when probing for emac devicesr. We get details of instances and + * resource information from platform init and register a network device + * and allocate resources necessary for driver to perform + */ +static int __devinit davinci_emac_probe(struct platform_device *pdev) +{ + int rc = 0; + struct resource *res; + struct net_device *ndev; + struct emac_priv *priv; + unsigned long size; + struct emac_platform_data *pdata; + struct device *emac_dev; + + /* obtain emac clock from kernel */ + emac_clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(emac_clk)) { + printk(KERN_ERR "DaVinci EMAC: Failed to get EMAC clock\n"); + return -EBUSY; + } + emac_bus_frequency = clk_get_rate(emac_clk); + /* TODO: Probe PHY here if possible */ + + ndev = alloc_etherdev(sizeof(struct emac_priv)); + if (!ndev) { + printk(KERN_ERR "DaVinci EMAC: Error allocating net_device\n"); + clk_put(emac_clk); + return -ENOMEM; + } + + platform_set_drvdata(pdev, ndev); + priv = netdev_priv(ndev); + priv->pdev = pdev; + priv->ndev = ndev; + priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG); + + spin_lock_init(&priv->tx_lock); + spin_lock_init(&priv->rx_lock); + spin_lock_init(&priv->lock); + + pdata = pdev->dev.platform_data; + if (!pdata) { + printk(KERN_ERR "DaVinci EMAC: No platfrom data\n"); + return -ENODEV; + } + + /* MAC addr and PHY mask , RMII enable info from platform_data */ + memcpy(priv->mac_addr, pdata->mac_addr, 6); + priv->phy_mask = pdata->phy_mask; + priv->rmii_en = pdata->rmii_en; + priv->version = pdata->version; + emac_dev = &ndev->dev; + /* Get EMAC platform data */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(emac_dev, "DaVinci EMAC: Error getting res\n"); + rc = -ENOENT; + goto probe_quit; + } + + priv->emac_base_phys = res->start + pdata->ctrl_reg_offset; + size = res->end - res->start + 1; + if (!request_mem_region(res->start, size, ndev->name)) { + dev_err(emac_dev, "DaVinci EMAC: failed request_mem_region() \ + for regs\n"); + rc = -ENXIO; + goto probe_quit; + } + + priv->remap_addr = ioremap(res->start, size); + if (!priv->remap_addr) { + dev_err(emac_dev, "Unable to map IO\n"); + rc = -ENOMEM; + release_mem_region(res->start, size); + goto probe_quit; + } + priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset; + ndev->base_addr = (unsigned long)priv->remap_addr; + + priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset; + priv->ctrl_ram_size = pdata->ctrl_ram_size; + priv->emac_ctrl_ram = priv->remap_addr + pdata->ctrl_ram_offset; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(emac_dev, "DaVinci EMAC: Error getting irq res\n"); + rc = -ENOENT; + goto no_irq_res; + } + ndev->irq = res->start; + + if (!is_valid_ether_addr(priv->mac_addr)) { + DECLARE_MAC_BUF(buf); + /* Use random MAC if none passed */ + random_ether_addr(priv->mac_addr); + printk(KERN_WARNING "%s: using random MAC addr: %s\n", + __func__, print_mac(buf, priv->mac_addr)); + } + + ndev->netdev_ops = &emac_netdev_ops; + SET_ETHTOOL_OPS(ndev, ðtool_ops); + netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT); + + /* register the network device */ + SET_NETDEV_DEV(ndev, &pdev->dev); + rc = register_netdev(ndev); + if (rc) { + dev_err(emac_dev, "DaVinci EMAC: Error in register_netdev\n"); + rc = -ENODEV; + goto netdev_reg_err; + } + + clk_enable(emac_clk); + + /* MII/Phy intialisation, mdio bus registration */ + emac_mii = mdiobus_alloc(); + if (emac_mii == NULL) { + dev_err(emac_dev, "DaVinci EMAC: Error allocating mii_bus\n"); + rc = -ENOMEM; + goto mdio_alloc_err; + } + + priv->mii_bus = emac_mii; + emac_mii->name = "emac-mii", + emac_mii->read = emac_mii_read, + emac_mii->write = emac_mii_write, + emac_mii->reset = emac_mii_reset, + emac_mii->irq = mii_irqs, + emac_mii->phy_mask = ~(priv->phy_mask); + emac_mii->parent = &pdev->dev; + emac_mii->priv = priv->remap_addr + pdata->mdio_reg_offset; + snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", priv->pdev->id); + mdio_max_freq = pdata->mdio_max_freq; + emac_mii->reset(emac_mii); + + /* Register the MII bus */ + rc = mdiobus_register(emac_mii); + if (rc) + goto mdiobus_quit; + + if (netif_msg_probe(priv)) { + dev_notice(emac_dev, "DaVinci EMAC Probe found device "\ + "(regs: %p, irq: %d)\n", + (void *)priv->emac_base_phys, ndev->irq); + } + return 0; + +mdiobus_quit: + mdiobus_free(emac_mii); + +netdev_reg_err: +mdio_alloc_err: +no_irq_res: + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start + 1); + iounmap(priv->remap_addr); + +probe_quit: + clk_put(emac_clk); + free_netdev(ndev); + return rc; +} + +/** + * davinci_emac_remove: EMAC device remove + * @pdev: The DaVinci EMAC device that we are removing + * + * Called when removing the device driver. We disable clock usage and release + * the resources taken up by the driver and unregister network device + */ +static int __devexit davinci_emac_remove(struct platform_device *pdev) +{ + struct resource *res; + struct net_device *ndev = platform_get_drvdata(pdev); + struct emac_priv *priv = netdev_priv(ndev); + + dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n"); + + clk_disable(emac_clk); + platform_set_drvdata(pdev, NULL); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mdiobus_unregister(priv->mii_bus); + mdiobus_free(priv->mii_bus); + + release_mem_region(res->start, res->end - res->start + 1); + + unregister_netdev(ndev); + free_netdev(ndev); + iounmap(priv->remap_addr); + + clk_disable(emac_clk); + clk_put(emac_clk); + + return 0; +} + +/** + * davinci_emac_driver: EMAC platform driver structure + * + * We implement only probe and remove functions - suspend/resume and + * others not supported by this module + */ +static struct platform_driver davinci_emac_driver = { + .driver = { + .name = "davinci_emac", + .owner = THIS_MODULE, + }, + .probe = davinci_emac_probe, + .remove = __devexit_p(davinci_emac_remove), +}; + +/** + * davinci_emac_init: EMAC driver module init + * + * Called when initializing the driver. We register the driver with + * the platform. + */ +static int __init davinci_emac_init(void) +{ + return platform_driver_register(&davinci_emac_driver); +} +module_init(davinci_emac_init); + +/** + * davinci_emac_exit: EMAC driver module exit + * + * Called when exiting the driver completely. We unregister the driver with + * the platform and exit + */ +static void __exit davinci_emac_exit(void) +{ + platform_driver_unregister(&davinci_emac_driver); +} +module_exit(davinci_emac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>"); +MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>"); +MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver"); |