diff options
45 files changed, 9213 insertions, 537 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index cae9001a670..93547d3d04b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4051,6 +4051,12 @@ L: linux-usb@vger.kernel.org S: Maintained W: http://www.kroah.com/linux-usb/ +USB CYPRESS C67X00 DRIVER +P: Peter Korsgaard +M: jacmet@sunsite.dk +L: linux-usb@vger.kernel.org +S: Maintained + USB DAVICOM DM9601 DRIVER P: Peter Korsgaard M: jacmet@sunsite.dk diff --git a/drivers/block/ub.c b/drivers/block/ub.c index e322cce8c12..3a281ef11ff 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -205,6 +205,7 @@ struct ub_scsi_cmd { unsigned char key, asc, ascq; /* May be valid if error==-EIO */ int stat_count; /* Retries getting status. */ + unsigned int timeo; /* jiffies until rq->timeout changes */ unsigned int len; /* Requested length */ unsigned int current_sg; @@ -318,6 +319,7 @@ struct ub_dev { int openc; /* protected by ub_lock! */ /* kref is too implicit for our taste */ int reset; /* Reset is running */ + int bad_resid; unsigned int tagcnt; char name[12]; struct usb_device *dev; @@ -764,6 +766,12 @@ static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun, cmd->cdb_len = rq->cmd_len; cmd->len = rq->data_len; + + /* + * To reapply this to every URB is not as incorrect as it looks. + * In return, we avoid any complicated tracking calculations. + */ + cmd->timeo = rq->timeout; } static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) @@ -785,10 +793,6 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) scsi_status = 0; } else { if (cmd->act_len != cmd->len) { - if ((cmd->key == MEDIUM_ERROR || - cmd->key == UNIT_ATTENTION) && - ub_rw_cmd_retry(sc, lun, urq, cmd) == 0) - return; scsi_status = SAM_STAT_CHECK_CONDITION; } else { scsi_status = 0; @@ -804,7 +808,10 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) else scsi_status = DID_ERROR << 16; } else { - if (cmd->error == -EIO) { + if (cmd->error == -EIO && + (cmd->key == 0 || + cmd->key == MEDIUM_ERROR || + cmd->key == UNIT_ATTENTION)) { if (ub_rw_cmd_retry(sc, lun, urq, cmd) == 0) return; } @@ -1259,14 +1266,19 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } - len = le32_to_cpu(bcs->Residue); - if (len != cmd->len - cmd->act_len) { - /* - * It is all right to transfer less, the caller has - * to check. But it's not all right if the device - * counts disagree with our counts. - */ - goto Bad_End; + if (!sc->bad_resid) { + len = le32_to_cpu(bcs->Residue); + if (len != cmd->len - cmd->act_len) { + /* + * Only start ignoring if this cmd ended well. + */ + if (cmd->len == cmd->act_len) { + printk(KERN_NOTICE "%s: " + "bad residual %d of %d, ignoring\n", + sc->name, len, cmd->len); + sc->bad_resid = 1; + } + } } switch (bcs->Status) { @@ -1297,8 +1309,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) ub_state_done(sc, cmd, -EIO); } else { - printk(KERN_WARNING "%s: " - "wrong command state %d\n", + printk(KERN_WARNING "%s: wrong command state %d\n", sc->name, cmd->state); ub_state_done(sc, cmd, -EINVAL); return; @@ -1336,7 +1347,10 @@ static void ub_data_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return; } - sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT; + if (cmd->timeo) + sc->work_timer.expires = jiffies + cmd->timeo; + else + sc->work_timer.expires = jiffies + UB_DATA_TIMEOUT; add_timer(&sc->work_timer); cmd->state = UB_CMDST_DATA; @@ -1376,7 +1390,10 @@ static int __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd) return -1; } - sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT; + if (cmd->timeo) + sc->work_timer.expires = jiffies + cmd->timeo; + else + sc->work_timer.expires = jiffies + UB_STAT_TIMEOUT; add_timer(&sc->work_timer); return 0; } @@ -1515,8 +1532,7 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) return; } if (cmd->state != UB_CMDST_SENSE) { - printk(KERN_WARNING "%s: " - "sense done with bad cmd state %d\n", + printk(KERN_WARNING "%s: sense done with bad cmd state %d\n", sc->name, cmd->state); return; } @@ -1720,7 +1736,7 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp, } /* - * This is called once a new disk was seen by the block layer or by ub_probe(). + * This is called by check_disk_change if we reported a media change. * The main onjective here is to discover the features of the media such as * the capacity, read-only status, etc. USB storage generally does not * need to be spun up, but if we needed it, this would be the place. @@ -2136,8 +2152,7 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, } if (ep_in == NULL || ep_out == NULL) { - printk(KERN_NOTICE "%s: failed endpoint check\n", - sc->name); + printk(KERN_NOTICE "%s: failed endpoint check\n", sc->name); return -ENODEV; } @@ -2354,7 +2369,7 @@ static void ub_disconnect(struct usb_interface *intf) spin_unlock_irqrestore(&ub_lock, flags); /* - * Fence stall clearnings, operations triggered by unlinkings and so on. + * Fence stall clearings, operations triggered by unlinkings and so on. * We do not attempt to unlink any URBs, because we do not trust the * unlink paths in HC drivers. Also, we get -84 upon disconnect anyway. */ @@ -2417,7 +2432,7 @@ static void ub_disconnect(struct usb_interface *intf) spin_unlock_irqrestore(sc->lock, flags); /* - * There is virtually no chance that other CPU runs times so long + * There is virtually no chance that other CPU runs a timeout so long * after ub_urb_complete should have called del_timer, but only if HCD * didn't forget to deliver a callback on unlink. */ diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 516a6400db4..a419c42e880 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -17,6 +17,8 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ +obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ + obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index 86e64035edb..be0b8daac9c 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -19,7 +19,6 @@ if USB_ATM config USB_SPEEDTOUCH tristate "Speedtouch USB support" - depends on USB_ATM select FW_LOADER help Say Y here if you have an SpeedTouch USB or SpeedTouch 330 @@ -32,7 +31,6 @@ config USB_SPEEDTOUCH config USB_CXACRU tristate "Conexant AccessRunner USB support" - depends on USB_ATM select FW_LOADER help Say Y here if you have an ADSL USB modem based on the Conexant @@ -45,7 +43,6 @@ config USB_CXACRU config USB_UEAGLEATM tristate "ADI 930 and eagle USB DSL modem" - depends on USB_ATM select FW_LOADER help Say Y here if you have an ADSL USB modem based on the ADI 930 @@ -58,7 +55,6 @@ config USB_UEAGLEATM config USB_XUSBATM tristate "Other USB DSL modem support" - depends on USB_ATM help Say Y here if you have a DSL USB modem not explicitly supported by another USB DSL drivers. In order to use your modem you will need to diff --git a/drivers/usb/c67x00/Makefile b/drivers/usb/c67x00/Makefile new file mode 100644 index 00000000000..868bc41b598 --- /dev/null +++ b/drivers/usb/c67x00/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for Cypress C67X00 USB Controller +# + +ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG + +obj-$(CONFIG_USB_C67X00_HCD) += c67x00.o + +c67x00-objs := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c new file mode 100644 index 00000000000..5633bc5c8bf --- /dev/null +++ b/drivers/usb/c67x00/c67x00-drv.c @@ -0,0 +1,243 @@ +/* + * c67x00-drv.c: Cypress C67X00 USB Common infrastructure + * + * Copyright (C) 2006-2008 Barco N.V. + * Derived from the Cypress cy7c67200/300 ezusb linux driver and + * based on multiple host controller drivers inside the linux kernel. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. + */ + +/* + * This file implements the common infrastructure for using the c67x00. + * It is both the link between the platform configuration and subdrivers and + * the link between the common hardware parts and the subdrivers (e.g. + * interrupt handling). + * + * The c67x00 has 2 SIE's (serial interface engine) wich can be configured + * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG). + * + * Depending on the platform configuration, the SIE's are created and + * the corresponding subdriver is initialized (c67x00_probe_sie). + */ + +#include <linux/device.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/usb/c67x00.h> + +#include "c67x00.h" +#include "c67x00-hcd.h" + +static void c67x00_probe_sie(struct c67x00_sie *sie, + struct c67x00_device *dev, int sie_num) +{ + spin_lock_init(&sie->lock); + sie->dev = dev; + sie->sie_num = sie_num; + sie->mode = c67x00_sie_config(dev->pdata->sie_config, sie_num); + + switch (sie->mode) { + case C67X00_SIE_HOST: + c67x00_hcd_probe(sie); + break; + + case C67X00_SIE_UNUSED: + dev_info(sie_dev(sie), + "Not using SIE %d as requested\n", sie->sie_num); + break; + + default: + dev_err(sie_dev(sie), + "Unsupported configuration: 0x%x for SIE %d\n", + sie->mode, sie->sie_num); + break; + } +} + +static void c67x00_remove_sie(struct c67x00_sie *sie) +{ + switch (sie->mode) { + case C67X00_SIE_HOST: + c67x00_hcd_remove(sie); + break; + + default: + break; + } +} + +static irqreturn_t c67x00_irq(int irq, void *__dev) +{ + struct c67x00_device *c67x00 = __dev; + struct c67x00_sie *sie; + u16 msg, int_status; + int i, count = 8; + + int_status = c67x00_ll_hpi_status(c67x00); + if (!int_status) + return IRQ_NONE; + + while (int_status != 0 && (count-- >= 0)) { + c67x00_ll_irq(c67x00, int_status); + for (i = 0; i < C67X00_SIES; i++) { + sie = &c67x00->sie[i]; + msg = 0; + if (int_status & SIEMSG_FLG(i)) + msg = c67x00_ll_fetch_siemsg(c67x00, i); + if (sie->irq) + sie->irq(sie, int_status, msg); + } + int_status = c67x00_ll_hpi_status(c67x00); + } + + if (int_status) + dev_warn(&c67x00->pdev->dev, "Not all interrupts handled! " + "status = 0x%04x\n", int_status); + + return IRQ_HANDLED; +} + +/* ------------------------------------------------------------------------- */ + +static int __devinit c67x00_drv_probe(struct platform_device *pdev) +{ + struct c67x00_device *c67x00; + struct c67x00_platform_data *pdata; + struct resource *res, *res2; + int ret, i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res2) + return -ENODEV; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENODEV; + + c67x00 = kzalloc(sizeof(*c67x00), GFP_KERNEL); + if (!c67x00) + return -ENOMEM; + + if (!request_mem_region(res->start, res->end - res->start + 1, + pdev->name)) { + dev_err(&pdev->dev, "Memory region busy\n"); + ret = -EBUSY; + goto request_mem_failed; + } + c67x00->hpi.base = ioremap(res->start, res->end - res->start + 1); + if (!c67x00->hpi.base) { + dev_err(&pdev->dev, "Unable to map HPI registers\n"); + ret = -EIO; + goto map_failed; + } + + spin_lock_init(&c67x00->hpi.lock); + c67x00->hpi.regstep = pdata->hpi_regstep; + c67x00->pdata = pdev->dev.platform_data; + c67x00->pdev = pdev; + + c67x00_ll_init(c67x00); + c67x00_ll_hpi_reg_init(c67x00); + + ret = request_irq(res2->start, c67x00_irq, 0, pdev->name, c67x00); + if (ret) { + dev_err(&pdev->dev, "Cannot claim IRQ\n"); + goto request_irq_failed; + } + + ret = c67x00_ll_reset(c67x00); + if (ret) { + dev_err(&pdev->dev, "Device reset failed\n"); + goto reset_failed; + } + + for (i = 0; i < C67X00_SIES; i++) + c67x00_probe_sie(&c67x00->sie[i], c67x00, i); + + platform_set_drvdata(pdev, c67x00); + + return 0; + + reset_failed: + free_irq(res2->start, c67x00); + request_irq_failed: + iounmap(c67x00->hpi.base); + map_failed: + release_mem_region(res->start, res->end - res->start + 1); + request_mem_failed: + kfree(c67x00); + + return ret; +} + +static int __devexit c67x00_drv_remove(struct platform_device *pdev) +{ + struct c67x00_device *c67x00 = platform_get_drvdata(pdev); + struct resource *res; + int i; + + for (i = 0; i < C67X00_SIES; i++) + c67x00_remove_sie(&c67x00->sie[i]); + + c67x00_ll_release(c67x00); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res) + free_irq(res->start, c67x00); + + iounmap(c67x00->hpi.base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, res->end - res->start + 1); + + kfree(c67x00); + + return 0; +} + +static struct platform_driver c67x00_driver = { + .probe = c67x00_drv_probe, + .remove = __devexit_p(c67x00_drv_remove), + .driver = { + .owner = THIS_MODULE, + .name = "c67x00", + }, +}; +MODULE_ALIAS("platform:c67x00"); + +static int __init c67x00_init(void) +{ + return platform_driver_register(&c67x00_driver); +} + +static void __exit c67x00_exit(void) +{ + platform_driver_unregister(&c67x00_driver); +} + +module_init(c67x00_init); +module_exit(c67x00_exit); + +MODULE_AUTHOR("Peter Korsgaard, Jan Veldeman, Grant Likely"); +MODULE_DESCRIPTION("Cypress C67X00 USB Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c new file mode 100644 index 00000000000..a22b887f4e9 --- /dev/null +++ b/drivers/usb/c67x00/c67x00-hcd.c @@ -0,0 +1,412 @@ +/* + * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver + * + * Copyright (C) 2006-2008 Barco N.V. + * Derived from the Cypress cy7c67200/300 ezusb linux driver and + * based on multiple host controller drivers inside the linux kernel. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/usb.h> + +#include "c67x00.h" +#include "c67x00-hcd.h" + +/* -------------------------------------------------------------------------- + * Root Hub Support + */ + +static __u8 c67x00_hub_des[] = { + 0x09, /* __u8 bLength; */ + 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + 0x02, /* __u8 bNbrPorts; */ + 0x00, /* __u16 wHubCharacteristics; */ + 0x00, /* (per-port OC, no power switching) */ + 0x32, /* __u8 bPwrOn2pwrGood; 2ms */ + 0x00, /* __u8 bHubContrCurrent; 0 mA */ + 0x00, /* __u8 DeviceRemovable; ** 7 Ports max ** */ + 0xff, /* __u8 PortPwrCtrlMask; ** 7 ports max ** */ +}; + +static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port) +{ + struct c67x00_hcd *c67x00 = sie->private_data; + unsigned long flags; + + c67x00_ll_husb_reset(sie, port); + + spin_lock_irqsave(&c67x00->lock, flags); + c67x00_ll_husb_reset_port(sie, port); + spin_unlock_irqrestore(&c67x00->lock, flags); + + c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT); +} + +static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); + struct c67x00_sie *sie = c67x00->sie; + u16 status; + int i; + + *buf = 0; + status = c67x00_ll_usb_get_status(sie); + for (i = 0; i < C67X00_PORTS; i++) + if (status & PORT_CONNECT_CHANGE(i)) + *buf |= (1 << i); + + /* bit 0 denotes hub change, b1..n port change */ + *buf <<= 1; + + return !!*buf; +} + +static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); + struct c67x00_sie *sie = c67x00->sie; + u16 status, usb_status; + int len = 0; + unsigned int port = wIndex-1; + u16 wPortChange, wPortStatus; + + switch (typeReq) { + + case GetHubStatus: + *(__le32 *) buf = cpu_to_le32(0); + len = 4; /* hub power */ + break; + + case GetPortStatus: + if (wIndex > C67X00_PORTS) + return -EPIPE; + + status = c67x00_ll_usb_get_status(sie); + usb_status = c67x00_ll_get_usb_ctl(sie); + + wPortChange = 0; + if (status & PORT_CONNECT_CHANGE(port)) + wPortChange |= USB_PORT_STAT_C_CONNECTION; + + wPortStatus = USB_PORT_STAT_POWER; + if (!(status & PORT_SE0_STATUS(port))) + wPortStatus |= USB_PORT_STAT_CONNECTION; + if (usb_status & LOW_SPEED_PORT(port)) { + wPortStatus |= USB_PORT_STAT_LOW_SPEED; + c67x00->low_speed_ports |= (1 << port); + } else + c67x00->low_speed_ports &= ~(1 << port); + + if (usb_status & SOF_EOP_EN(port)) + wPortStatus |= USB_PORT_STAT_ENABLE; + + *(__le16 *) buf = cpu_to_le16(wPortStatus); + *(__le16 *) (buf + 2) = cpu_to_le16(wPortChange); + len = 4; + break; + + case SetHubFeature: /* We don't implement these */ + case ClearHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + len = 0; + break; + + default: + return -EPIPE; + } + break; + + case SetPortFeature: + if (wIndex > C67X00_PORTS) + return -EPIPE; + + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + dev_dbg(c67x00_hcd_dev(c67x00), + "SetPortFeature %d (SUSPEND)\n", port); + len = 0; + break; + + case USB_PORT_FEAT_RESET: + c67x00_hub_reset_host_port(sie, port); + len = 0; + break; + + case USB_PORT_FEAT_POWER: + /* Power always enabled */ + len = 0; + break; + + default: + dev_dbg(c67x00_hcd_dev(c67x00), + "%s: SetPortFeature %d (0x%04x) Error!\n", + __func__, port, wValue); + return -EPIPE; + } + break; + + case ClearPortFeature: + if (wIndex > C67X00_PORTS) + return -EPIPE; + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + /* Reset the port so that the c67x00 also notices the + * disconnect */ + c67x00_hub_reset_host_port(sie, port); + len = 0; + break; + + case USB_PORT_FEAT_C_ENABLE: + dev_dbg(c67x00_hcd_dev(c67x00), + "ClearPortFeature (%d): C_ENABLE\n", port); + len = 0; + break; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(c67x00_hcd_dev(c67x00), + "ClearPortFeature (%d): SUSPEND\n", port); + len = 0; + break; + + case USB_PORT_FEAT_C_SUSPEND: + dev_dbg(c67x00_hcd_dev(c67x00), + "ClearPortFeature (%d): C_SUSPEND\n", port); + len = 0; + break; + + case USB_PORT_FEAT_POWER: + dev_dbg(c67x00_hcd_dev(c67x00), + "ClearPortFeature (%d): POWER\n", port); + return -EPIPE; + + case USB_PORT_FEAT_C_CONNECTION: + c67x00_ll_usb_clear_status(sie, + PORT_CONNECT_CHANGE(port)); + len = 0; + break; + + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(c67x00_hcd_dev(c67x00), + "ClearPortFeature (%d): OVER_CURRENT\n", port); + len = 0; + break; + + case USB_PORT_FEAT_C_RESET: + dev_dbg(c67x00_hcd_dev(c67x00), + "ClearPortFeature (%d): C_RESET\n", port); + len = 0; + break; + + default: + dev_dbg(c67x00_hcd_dev(c67x00), + "%s: ClearPortFeature %d (0x%04x) Error!\n", + __func__, port, wValue); + return -EPIPE; + } + break; + + case GetHubDescriptor: + len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength); + memcpy(buf, c67x00_hub_des, len); + break; + + default: + dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__); + return -EPIPE; + } + + return 0; +} + +/* --------------------------------------------------------------------- + * Main part of host controller driver + */ + +/** + * c67x00_hcd_irq + * + * This function is called from the interrupt handler in c67x00-drv.c + */ +static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg) +{ + struct c67x00_hcd *c67x00 = sie->private_data; + struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00); + + /* Handle sie message flags */ + if (msg) { + if (msg & HUSB_TDListDone) + c67x00_sched_kick(c67x00); + else + dev_warn(c67x00_hcd_dev(c67x00), + "Unknown SIE msg flag(s): 0x%04x\n", msg); + } + + if (unlikely(hcd->state == HC_STATE_HALT)) + return; + + if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + return; + + /* Handle Start of frame events */ + if (int_status & SOFEOP_FLG(sie->sie_num)) { + c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG); + c67x00_sched_kick(c67x00); + set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + } +} + +/** + * c67x00_hcd_start: Host controller start hook + */ +static int c67x00_hcd_start(struct usb_hcd *hcd) +{ + hcd->uses_new_polling = 1; + hcd->state = HC_STATE_RUNNING; + hcd->poll_rh = 1; + + return 0; +} + +/** + * c67x00_hcd_stop: Host controller stop hook + */ +static void c67x00_hcd_stop(struct usb_hcd *hcd) +{ + /* Nothing to do */ +} + +static int c67x00_hcd_get_frame(struct usb_hcd *hcd) +{ + struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); + u16 temp_val; + + dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__); + temp_val = c67x00_ll_husb_get_frame(c67x00->sie); + temp_val &= HOST_FRAME_MASK; + return temp_val ? (temp_val - 1) : HOST_FRAME_MASK; +} + +static struct hc_driver c67x00_hc_driver = { + .description = "c67x00-hcd", + .product_desc = "Cypress C67X00 Host Controller", + .hcd_priv_size = sizeof(struct c67x00_hcd), + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .start = c67x00_hcd_start, + .stop = c67x00_hcd_stop, + + /* + |