aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/ide/ide-io.c91
-rw-r--r--drivers/ide/ide.c4
-rw-r--r--include/linux/blkdev.h5
3 files changed, 54 insertions, 46 deletions
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index c01615dec20..4f2f138de2c 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -142,38 +142,41 @@ enum {
static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
{
+ struct request_pm_state *pm = rq->end_io_data;
+
if (drive->media != ide_disk)
return;
- switch (rq->pm->pm_step) {
+ switch (pm->pm_step) {
case ide_pm_flush_cache: /* Suspend step 1 (flush cache) complete */
- if (rq->pm->pm_state == PM_EVENT_FREEZE)
- rq->pm->pm_step = ide_pm_state_completed;
+ if (pm->pm_state == PM_EVENT_FREEZE)
+ pm->pm_step = ide_pm_state_completed;
else
- rq->pm->pm_step = idedisk_pm_standby;
+ pm->pm_step = idedisk_pm_standby;
break;
case idedisk_pm_standby: /* Suspend step 2 (standby) complete */
- rq->pm->pm_step = ide_pm_state_completed;
+ pm->pm_step = ide_pm_state_completed;
break;
case idedisk_pm_idle: /* Resume step 1 (idle) complete */
- rq->pm->pm_step = ide_pm_restore_dma;
+ pm->pm_step = ide_pm_restore_dma;
break;
}
}
static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
{
+ struct request_pm_state *pm = rq->end_io_data;
ide_task_t *args = rq->special;
memset(args, 0, sizeof(*args));
if (drive->media != ide_disk) {
/* skip idedisk_pm_idle for ATAPI devices */
- if (rq->pm->pm_step == idedisk_pm_idle)
- rq->pm->pm_step = ide_pm_restore_dma;
+ if (pm->pm_step == idedisk_pm_idle)
+ pm->pm_step = ide_pm_restore_dma;
}
- switch (rq->pm->pm_step) {
+ switch (pm->pm_step) {
case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */
if (drive->media != ide_disk)
break;
@@ -215,7 +218,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
drive->hwif->ide_dma_check(drive);
break;
}
- rq->pm->pm_step = ide_pm_state_completed;
+ pm->pm_step = ide_pm_state_completed;
return ide_stopped;
}
@@ -362,12 +365,13 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
}
}
} else if (blk_pm_request(rq)) {
+ struct request_pm_state *pm = rq->end_io_data;
#ifdef DEBUG_PM
printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
drive->name, rq->pm->pm_step, stat, err);
#endif
ide_complete_power_step(drive, rq, stat, err);
- if (rq->pm->pm_step == ide_pm_state_completed)
+ if (pm->pm_step == ide_pm_state_completed)
ide_complete_pm_request(drive, rq);
return;
}
@@ -871,6 +875,39 @@ done:
return ide_stopped;
}
+static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
+{
+ struct request_pm_state *pm = rq->end_io_data;
+
+ if (blk_pm_suspend_request(rq) &&
+ pm->pm_step == ide_pm_state_start_suspend)
+ /* Mark drive blocked when starting the suspend sequence. */
+ drive->blocked = 1;
+ else if (blk_pm_resume_request(rq) &&
+ pm->pm_step == ide_pm_state_start_resume) {
+ /*
+ * The first thing we do on wakeup is to wait for BSY bit to
+ * go away (with a looong timeout) as a drive on this hwif may
+ * just be POSTing itself.
+ * We do that before even selecting as the "other" device on
+ * the bus may be broken enough to walk on our toes at this
+ * point.
+ */
+ int rc;
+#ifdef DEBUG_PM
+ printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
+#endif
+ rc = ide_wait_not_busy(HWIF(drive), 35000);
+ if (rc)
+ printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
+ SELECT_DRIVE(drive);
+ HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]);
+ rc = ide_wait_not_busy(HWIF(drive), 10000);
+ if (rc)
+ printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+ }
+}
+
/**
* start_request - start of I/O and command issuing for IDE
*
@@ -909,33 +946,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
if (block == 0 && drive->remap_0_to_1 == 1)
block = 1; /* redirect MBR access to EZ-Drive partn table */
- if (blk_pm_suspend_request(rq) &&
- rq->pm->pm_step == ide_pm_state_start_suspend)
- /* Mark drive blocked when starting the suspend sequence. */
- drive->blocked = 1;
- else if (blk_pm_resume_request(rq) &&
- rq->pm->pm_step == ide_pm_state_start_resume) {
- /*
- * The first thing we do on wakeup is to wait for BSY bit to
- * go away (with a looong timeout) as a drive on this hwif may
- * just be POSTing itself.
- * We do that before even selecting as the "other" device on
- * the bus may be broken enough to walk on our toes at this
- * point.
- */
- int rc;
-#ifdef DEBUG_PM
- printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
- rc = ide_wait_not_busy(HWIF(drive), 35000);
- if (rc)
- printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
- SELECT_DRIVE(drive);
- HWIF(drive)->OUTB(8, HWIF(drive)->io_ports[IDE_CONTROL_OFFSET]);
- rc = ide_wait_not_busy(HWIF(drive), 10000);
- if (rc)
- printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
- }
+ if (blk_pm_request(rq))
+ ide_check_pm_state(drive, rq);
SELECT_DRIVE(drive);
if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) {
@@ -950,13 +962,14 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
else if (rq->flags & REQ_DRIVE_TASKFILE)
return execute_drive_cmd(drive, rq);
else if (blk_pm_request(rq)) {
+ struct request_pm_state *pm = rq->end_io_data;
#ifdef DEBUG_PM
printk("%s: start_power_step(step: %d)\n",
drive->name, rq->pm->pm_step);
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
- rq->pm->pm_step == ide_pm_state_completed)
+ pm->pm_step == ide_pm_state_completed)
ide_complete_pm_request(drive, rq);
return startstop;
}
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 9799aed772e..59fe358048b 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1226,7 +1226,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t state)
memset(&args, 0, sizeof(args));
rq.flags = REQ_PM_SUSPEND;
rq.special = &args;
- rq.pm = &rqpm;
+ rq.end_io_data = &rqpm;
rqpm.pm_step = ide_pm_state_start_suspend;
rqpm.pm_state = state.event;
@@ -1245,7 +1245,7 @@ static int generic_ide_resume(struct device *dev)
memset(&args, 0, sizeof(args));
rq.flags = REQ_PM_RESUME;
rq.special = &args;
- rq.pm = &rqpm;
+ rq.end_io_data = &rqpm;
rqpm.pm_step = ide_pm_state_start_resume;
rqpm.pm_state = PM_EVENT_ON;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 482a21d6762..371c0ce5f63 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -196,11 +196,6 @@ struct request {
int retries;
/*
- * For Power Management requests
- */
- struct request_pm_state *pm;
-
- /*
* completion callback. end_io_data should be folded in with waiting
*/
rq_end_io_fn *end_io;