diff options
26 files changed, 625 insertions, 667 deletions
diff --git a/arch/sh/Makefile b/arch/sh/Makefile index e3d8170ad00..99385d0b3f3 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -173,6 +173,7 @@ core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3 +cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5 cpuincdir-y += cpu-common # Must be last diff --git a/arch/sh/include/cpu-sh3/cpu/serial.h b/arch/sh/include/cpu-sh3/cpu/serial.h new file mode 100644 index 00000000000..7766329bc10 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/serial.h @@ -0,0 +1,10 @@ +#ifndef __CPU_SH3_SERIAL_H +#define __CPU_SH3_SERIAL_H + +#include <linux/serial_sci.h> + +extern struct plat_sci_port_ops sh770x_sci_port_ops; +extern struct plat_sci_port_ops sh7710_sci_port_ops; +extern struct plat_sci_port_ops sh7720_sci_port_ops; + +#endif /* __CPU_SH3_SERIAL_H */ diff --git a/arch/sh/include/cpu-sh4a/cpu/serial.h b/arch/sh/include/cpu-sh4a/cpu/serial.h new file mode 100644 index 00000000000..ff1bc275d21 --- /dev/null +++ b/arch/sh/include/cpu-sh4a/cpu/serial.h @@ -0,0 +1,7 @@ +#ifndef __CPU_SH4A_SERIAL_H +#define __CPU_SH4A_SERIAL_H + +/* arch/sh/kernel/cpu/sh4a/serial-sh7722.c */ +extern struct plat_sci_port_ops sh7722_sci_port_ops; + +#endif /* __CPU_SH4A_SERIAL_H */ diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index ecab274141a..6f13f33a35f 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -7,15 +7,15 @@ obj-y := ex.o probe.o entry.o setup-sh3.o obj-$(CONFIG_HIBERNATION) += swsusp.o # CPU subtype setup -obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o -obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o -obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o -obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o -obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o -obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o -obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o -obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o -obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o +obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o serial-sh770x.o +obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o serial-sh7710.o +obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o serial-sh7710.o +obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o serial-sh7720.o +obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o serial-sh7720.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o diff --git a/arch/sh/kernel/cpu/sh3/serial-sh770x.c b/arch/sh/kernel/cpu/sh3/serial-sh770x.c new file mode 100644 index 00000000000..4f7242c676b --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/serial-sh770x.c @@ -0,0 +1,33 @@ +#include <linux/serial_sci.h> +#include <linux/serial_core.h> +#include <linux/io.h> +#include <cpu/serial.h> + +#define SCPCR 0xA4000116 +#define SCPDR 0xA4000136 + +static void sh770x_sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + /* We need to set SCPCR to enable RTS/CTS */ + data = __raw_readw(SCPCR); + /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ + __raw_writew(data & 0x0fcf, SCPCR); + + if (!(cflag & CRTSCTS)) { + /* We need to set SCPCR to enable RTS/CTS */ + data = __raw_readw(SCPCR); + /* Clear out SCP7MD1,0, SCP4MD1,0, + Set SCP6MD1,0 = {01} (output) */ + __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); + + data = __raw_readb(SCPDR); + /* Set /RTS2 (bit6) = 0 */ + __raw_writeb(data & 0xbf, SCPDR); + } +} + +struct plat_sci_port_ops sh770x_sci_port_ops = { + .init_pins = sh770x_sci_init_pins, +}; diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7710.c b/arch/sh/kernel/cpu/sh3/serial-sh7710.c new file mode 100644 index 00000000000..42190ef6aeb --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/serial-sh7710.c @@ -0,0 +1,20 @@ +#include <linux/serial_sci.h> +#include <linux/serial_core.h> +#include <linux/io.h> +#include <cpu/serial.h> + +#define PACR 0xa4050100 +#define PBCR 0xa4050102 + +static void sh7710_sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + if (port->mapbase == 0xA4400000) { + __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); + __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); + } else if (port->mapbase == 0xA4410000) + __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); +} + +struct plat_sci_port_ops sh7710_sci_port_ops = { + .init_pins = sh7710_sci_init_pins, +}; diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c new file mode 100644 index 00000000000..8234e1e7abd --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/serial-sh7720.c @@ -0,0 +1,36 @@ +#include <linux/serial_sci.h> +#include <linux/serial_core.h> +#include <linux/io.h> +#include <cpu/serial.h> + +static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + if (cflag & CRTSCTS) { + /* enable RTS/CTS */ + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 9-2; enable all scif pins but sck */ + data = __raw_readw(PORT_PTCR); + __raw_writew((data & 0xfc03), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 9-2 */ + data = __raw_readw(PORT_PVCR); + __raw_writew((data & 0xfc03), PORT_PVCR); + } + } else { + if (port->mapbase == 0xa4430000) { /* SCIF0 */ + /* Clear PTCR bit 5-2; enable only tx and rx */ + data = __raw_readw(PORT_PTCR); + __raw_writew((data & 0xffc3), PORT_PTCR); + } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ + /* Clear PVCR bit 5-2 */ + data = __raw_readw(PORT_PVCR); + __raw_writew((data & 0xffc3), PORT_PVCR); + } + } +} + +struct plat_sci_port_ops sh7720_sci_port_ops = { + .init_pins = sh7720_sci_init_pins, +}; diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index cd2e702feb7..2309618c015 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -15,6 +15,7 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <asm/rtc.h> +#include <cpu/serial.h> enum { UNUSED = 0, @@ -75,6 +76,8 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIF, .irqs = { 56, 56, 56 }, + .ops = &sh770x_sci_port_ops, + .regtype = SCIx_SH7705_SCIF_REGTYPE, }; static struct platform_device scif0_device = { @@ -92,6 +95,8 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIF, .irqs = { 52, 52, 52 }, + .ops = &sh770x_sci_port_ops, + .regtype = SCIx_SH7705_SCIF_REGTYPE, }; static struct platform_device scif1_device = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 4551ad647c2..3f3d5fe5892 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -19,6 +19,7 @@ #include <linux/serial.h> #include <linux/serial_sci.h> #include <linux/sh_timer.h> +#include <cpu/serial.h> enum { UNUSED = 0, @@ -108,11 +109,14 @@ static struct platform_device rtc_device = { static struct plat_sci_port scif0_platform_data = { .mapbase = 0xfffffe80, + .port_reg = 0xa4000136, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCI, .irqs = { 23, 23, 23, 0 }, + .ops = &sh770x_sci_port_ops, + .regshift = 1, }; static struct platform_device scif0_device = { @@ -132,6 +136,8 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 56, 56, 56, 56 }, + .ops = &sh770x_sci_port_ops, + .regtype = SCIx_SH3_SCIF_REGTYPE, }; static struct platform_device scif1_device = { @@ -146,11 +152,14 @@ static struct platform_device scif1_device = { defined(CONFIG_CPU_SUBTYPE_SH7709) static struct plat_sci_port scif2_platform_data = { .mapbase = 0xa4000140, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_IRDA, .irqs = { 52, 52, 52, 52 }, + .ops = &sh770x_sci_port_ops, + .regshift = 1, }; static struct platform_device scif2_device = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 365b94a6fcb..94920345c14 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -20,6 +20,7 @@ #include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <asm/rtc.h> +#include <cpu/serial.h> static struct resource rtc_resources[] = { [0] = { @@ -55,6 +56,8 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .ops = &sh7720_sci_port_ops, + .regtype = SCIx_SH7705_SCIF_REGTYPE, }; static struct platform_device scif0_device = { @@ -72,6 +75,8 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_4, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .ops = &sh7720_sci_port_ops, + .regtype = SCIx_SH7705_SCIF_REGTYPE, }; static struct platform_device scif1_device = { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index e53b4b38bd1..c10db5b96e5 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -1,5 +1,5 @@ /* - * SH7750/SH7751 Setup + * SH7091/SH7750/SH7750S/SH7750R/SH7751/SH7751R Setup * * Copyright (C) 2006 Paul Mundt * Copyright (C) 2006 Jamie Lenehan @@ -38,11 +38,13 @@ static struct platform_device rtc_device = { static struct plat_sci_port sci_platform_data = { .mapbase = 0xffe00000, + .port_reg = 0xffe0001C .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_TE | SCSCR_RE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCI, .irqs = { 23, 23, 23, 0 }, + .regshift = 2, }; static struct platform_device sci_device = { diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 78bbf232e39..c0b4c774700 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -133,6 +133,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 52, 53, 55, 54 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -150,6 +151,7 @@ static struct plat_sci_port scif1_platform_data = { .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .irqs = { 72, 73, 75, 74 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -167,6 +169,7 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 76, 77, 79, 78 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -184,6 +187,7 @@ static struct plat_sci_port scif3_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCI, .irqs = { 80, 81, 82, 0 }, + .regshift = 2, }; static struct platform_device scif3_device = { diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index cc122b1d303..c57fb287011 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -10,7 +10,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o intc-shx3.o obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o -obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o +obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o serial-sh7722.o obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o obj-$(CONFIG_CPU_SUBTYPE_SH7724) += setup-sh7724.o obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o diff --git a/arch/sh/kernel/cpu/sh4a/serial-sh7722.c b/arch/sh/kernel/cpu/sh4a/serial-sh7722.c new file mode 100644 index 00000000000..59bc3a72702 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/serial-sh7722.c @@ -0,0 +1,23 @@ +#include <linux/serial_sci.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#define PSCR 0xA405011E + +static void sh7722_sci_init_pins(struct uart_port *port, unsigned int cflag) +{ + unsigned short data; + + if (port->mapbase == 0xffe00000) { + data = __raw_readw(PSCR); + data &= ~0x03cf; + if (!(cflag & CRTSCTS)) + data |= 0x0340; + + __raw_writew(data, PSCR); + } +} + +struct plat_sci_port_ops sh7722_sci_port_ops = { + .init_pins = sh7722_sci_init_pins, +}; diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 82616af64d6..87773869a2f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -20,6 +20,7 @@ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe00000, + .port_reg = 0xa405013e, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 5813d802361..863249dbf05 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -185,6 +185,8 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .ops = &sh7722_sci_port_ops, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif0_device = { @@ -202,6 +204,8 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .ops = &sh7722_sci_port_ops, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif1_device = { @@ -219,6 +223,8 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .ops = &sh7722_sci_port_ops, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif2_device = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 072382280f9..3c2810d8f72 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -23,11 +23,13 @@ /* Serial */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe00000, + .port_reg = 0xa4050160, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif0_device = { @@ -40,11 +42,13 @@ static struct platform_device scif0_device = { static struct plat_sci_port scif1_platform_data = { .mapbase = 0xffe10000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif1_device = { @@ -57,11 +61,13 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .mapbase = 0xffe20000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif2_device = { @@ -75,6 +81,7 @@ static struct platform_device scif2_device = { static struct plat_sci_port scif3_platform_data = { .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, + .port_reg = SCIx_NOT_SUPPORTED, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_3, .type = PORT_SCIFA, @@ -91,6 +98,7 @@ static struct platform_device scif3_device = { static struct plat_sci_port scif4_platform_data = { .mapbase = 0xa4e40000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_3, @@ -108,6 +116,7 @@ static struct platform_device scif4_device = { static struct plat_sci_port scif5_platform_data = { .mapbase = 0xa4e50000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_3, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 0333fe9e388..8c892887ebd 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -256,11 +256,13 @@ static struct platform_device dma1_device = { /* Serial */ static struct plat_sci_port scif0_platform_data = { .mapbase = 0xffe00000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 80, 80, 80, 80 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif0_device = { @@ -273,11 +275,13 @@ static struct platform_device scif0_device = { static struct plat_sci_port scif1_platform_data = { .mapbase = 0xffe10000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 81, 81, 81, 81 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif1_device = { @@ -290,11 +294,13 @@ static struct platform_device scif1_device = { static struct plat_sci_port scif2_platform_data = { .mapbase = 0xffe20000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE | SCSCR_REIE, .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 82, 82, 82, 82 }, + .regtype = SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, }; static struct platform_device scif2_device = { @@ -307,6 +313,7 @@ static struct platform_device scif2_device = { static struct plat_sci_port scif3_platform_data = { .mapbase = 0xa4e30000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_3, @@ -324,6 +331,7 @@ static struct platform_device scif3_device = { static struct plat_sci_port scif4_platform_data = { .mapbase = 0xa4e40000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_3, @@ -341,6 +349,7 @@ static struct platform_device scif4_device = { static struct plat_sci_port scif5_platform_data = { .mapbase = 0xa4e50000, + .port_reg = SCIx_NOT_SUPPORTED, .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_3, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 593eca6509b..00113515f23 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -23,6 +23,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 40, 40, 40, 40 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -40,6 +41,7 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 76, 76, 76, 76 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -57,6 +59,7 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_2, .type = PORT_SCIF, .irqs = { 104, 104, 104, 104 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 08add7fa684..3d4d2075c19 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -14,7 +14,6 @@ #include <linux/serial_sci.h> #include <linux/sh_dma.h> #include <linux/sh_timer.h> - #include <cpu/dma-register.h> static struct plat_sci_port scif0_platform_data = { @@ -24,6 +23,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 40, 40, 40, 40 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -41,6 +41,7 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 76, 76, 76, 76 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 18d8fc136fb..b29e6340414 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -15,9 +15,7 @@ #include <linux/mm.h> #include <linux/sh_dma.h> #include <linux/sh_timer.h> - #include <asm/mmzone.h> - #include <cpu/dma-register.h> static struct plat_sci_port scif0_platform_data = { @@ -27,6 +25,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 40, 40, 40, 40 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -44,6 +43,7 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 44, 44, 44, 44 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -61,6 +61,7 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 60, 60, 60, 60 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -78,6 +79,7 @@ static struct plat_sci_port scif3_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 61, 61, 61, 61 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif3_device = { @@ -95,6 +97,7 @@ static struct plat_sci_port scif4_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 62, 62, 62, 62 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif4_device = { @@ -112,6 +115,7 @@ static struct plat_sci_port scif5_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 63, 63, 63, 63 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif5_device = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index beba32beb6d..dd5e709f982 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -1,7 +1,7 @@ /* * SH7786 Setup * - * Copyright (C) 2009 - 2010 Renesas Solutions Corp. + * Copyright (C) 2009 - 2011 Renesas Solutions Corp. * Kuninori Morimoto <morimoto.kuninori@renesas.com> * Paul Mundt <paul.mundt@renesas.com> * @@ -33,6 +33,7 @@ static struct plat_sci_port scif0_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 40, 41, 43, 42 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif0_device = { @@ -53,6 +54,7 @@ static struct plat_sci_port scif1_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 44, 44, 44, 44 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif1_device = { @@ -70,6 +72,7 @@ static struct plat_sci_port scif2_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 50, 50, 50, 50 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif2_device = { @@ -87,6 +90,7 @@ static struct plat_sci_port scif3_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 51, 51, 51, 51 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif3_device = { @@ -104,6 +108,7 @@ static struct plat_sci_port scif4_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 52, 52, 52, 52 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif4_device = { @@ -121,6 +126,7 @@ static struct plat_sci_port scif5_platform_data = { .scbrr_algo_id = SCBRR_ALGO_1, .type = PORT_SCIF, .irqs = { 53, 53, 53, 53 }, + .regtype = SCIx_SH4_SCIF_FIFODATA_REGTYPE, }; static struct platform_device scif5_device = { diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 636144cea93..1c0cd2d26d3 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -974,7 +974,7 @@ config SERIAL_IP22_ZILOG_CONSOLE config SERIAL_SH_SCI tristate "SuperH SCI(F) serial port support" - depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE) + depends on HAVE_CLK && (SUPERH || ARCH_SHMOBILE) select SERIAL_CORE config SERIAL_SH_SCI_NR_UARTS diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index ebd8629c108..8e55e0a2733 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -54,10 +54,6 @@ #include <asm/sh_bios.h> #endif -#ifdef CONFIG_H8300 -#include <asm/gpio.h> -#endif - #include "sh-sci.h" struct sci_port { @@ -121,6 +117,255 @@ to_sci_port(struct uart_port *uart) return container_of(uart, struct sci_port, port); } +struct plat_sci_reg { + u8 offset, size; +}; + +/* Helper for invalidating specific entries of an inherited map. */ +#define sci_reg_invalid { .offset = 0, .size = 0 } + +static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { + [SCIx_PROBE_REGTYPE] = { + [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid, + }, + + /* + * Common SCI definitions, dependent on the port's regshift + * value. + */ + [SCIx_SCI_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x01, 8 }, + [SCSCR] = { 0x02, 8 }, + [SCxTDR] = { 0x03, 8 }, + [SCxSR] = { 0x04, 8 }, + [SCxRDR] = { 0x05, 8 }, + [SCFCR] = sci_reg_invalid, + [SCFDR] = sci_reg_invalid, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common definitions for legacy IrDA ports, dependent on + * regshift value. + */ + [SCIx_IRDA_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x01, 8 }, + [SCSCR] = { 0x02, 8 }, + [SCxTDR] = { 0x03, 8 }, + [SCxSR] = { 0x04, 8 }, + [SCxRDR] = { 0x05, 8 }, + [SCFCR] = { 0x06, 8 }, + [SCFDR] = { 0x07, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SCIFA definitions. + */ + [SCIx_SCIFA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x20, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x24, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SCIFB definitions. + */ + [SCIx_SCIFB_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x40, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x60, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SH-3 SCIF definitions. + */ + [SCIx_SH3_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 8 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, + + /* + * Common SH-4(A) SCIF(B) definitions. + */ + [SCIx_SH4_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = { 0x20, 16 }, + [SCLSR] = { 0x24, 16 }, + }, + + /* + * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR + * register. + */ + [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = { 0x24, 16 }, + }, + + /* + * Common SH-4(A) SCIF(B) definitions for ports with FIFO data + * count registers. + */ + [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x0c, 8 }, + [SCxSR] = { 0x10, 16 }, + [SCxRDR] = { 0x14, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */ + [SCRFDR] = { 0x20, 16 }, + [SCSPTR] = { 0x24, 16 }, + [SCLSR] = { 0x28, 16 }, + }, + + /* + * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR + * registers. + */ + [SCIx_SH7705_SCIF_REGTYPE] = { + [SCSMR] = { 0x00, 16 }, + [SCBRR] = { 0x04, 8 }, + [SCSCR] = { 0x08, 16 }, + [SCxTDR] = { 0x20, 8 }, + [SCxSR] = { 0x14, 16 }, + [SCxRDR] = { 0x24, 8 }, + [SCFCR] = { 0x18, 16 }, + [SCFDR] = { 0x1c, 16 }, + [SCTFDR] = sci_reg_invalid, + [SCRFDR] = sci_reg_invalid, + [SCSPTR] = sci_reg_invalid, + [SCLSR] = sci_reg_invalid, + }, +}; + +#define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset) + +/* + * The "offset" here is rather misleading, in that it refers to an enum + * value relative to the port mapping rather than the fixed offset + * itself, which needs to be manually retrieved from the platform's + * register map for the given port. + */ +static unsigned int sci_serial_in(struct uart_port *p, int offset) +{ + struct plat_sci_reg *reg = sci_getreg(p, offset); + + if (reg->size == 8) + return ioread8(p->membase + (reg->offset << p->regshift)); + else if (reg->size == 16) + return ioread16(p->membase + (reg->offset << p->regshift)); + else + WARN(1, "Invalid register access\n"); + + return 0; +} + +static void sci_serial_out(struct uart_port *p, int offset, int value) +{ + struct plat_sci_reg *reg = sci_getreg(p, offset); + + if (reg->size == 8) + iowrite8(value, p->membase + (reg->offset << p->regshift)); + else if (reg->size == 16) + iowrite16(value, p->membase + (reg->offset << p->regshift)); + else + WARN(1, "Invalid register access\n"); +} + +#define sci_in(up, offset) (up->serial_in(up, offset)) +#define sci_out(up, offset, value) (up->serial_out(up, offset, value)) + +static int sci_probe_regmap(struct plat_sci_port *cfg) +{ + switch (cfg->type) { + case PORT_SCI: + cfg->regtype = SCIx_SCI_REGTYPE; + break; + case PORT_IRDA: + cfg->regtype = SCIx_IRDA_REGTYPE; + break; + case PORT_SCIFA: + cfg->regtype = SCIx_SCIFA_REGTYPE; + break; + case PORT_SCIFB: + cfg->regtype = SCIx_SCIFB_REGTYPE; + break; + case PORT_SCIF: + /* + * The SH-4 is a bit of a misnomer here, although that's + * where this particular port layout originated. This + * configuration (or some slight variation thereof) + * remains the dominant model for all SCIFs. + */ + cfg->regtype = SCIx_SH4_SCIF_REGTYPE; + break; + default: + printk(KERN_ERR "Can't probe register map for given port\n"); + return -EINVAL; + } + + return 0; +} + #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) #ifdef CONFIG_CONSOLE_POLL @@ -164,223 +409,76 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c) } #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */ -#if defined(__H8300H__) || defined(__H8300S__) static void sci_init_pins(struct uart_port *port, unsigned int cflag) { - int ch = (port->mapbase - SMR0) >> 3; - - /* set DDR regs */ - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].rx, - H8300_GPIO_INPUT); - H8300_GPIO_DDR(h8300_sci_pins[ch].port, - h8300_sci_pins[ch].tx, - H8300_GPIO_OUTPUT); - - /* tx mark output*/ - H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (port->mapbase == 0xA4400000) { - __raw_writew(__raw_readw(PACR) & 0xffc0, PACR); - __raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR); - } else if (port->mapbase == 0xA4410000) - __raw_writew(__raw_readw(PBCR) & 0xf003, PBCR); -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7721) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - if (cflag & CRTSCTS) { - /* enable RTS/CTS */ - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 9-2; enable all scif pins but sck */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xfc03), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 9-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xfc03), PORT_PVCR); - } - } else { - if (port->mapbase == 0xa4430000) { /* SCIF0 */ - /* Clear PTCR bit 5-2; enable only tx and rx */ - data = __raw_readw(PORT_PTCR); - __raw_writew((data & 0xffc3), PORT_PTCR); - } else if (port->mapbase == 0xa4438000) { /* SCIF1 */ - /* Clear PVCR bit 5-2 */ - data = __raw_readw(PORT_PVCR); - __raw_writew((data & 0xffc3), PORT_PVCR); - } - } -} -#elif defined(CONFIG_CPU_SH3) -/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ - __raw_writew(data & 0x0fcf, SCPCR); - - if (!(cflag & CRTSCTS)) { - /* We need to set SCPCR to enable RTS/CTS */ - data = __raw_readw(SCPCR); - /* Clear out SCP7MD1,0, SCP4MD1,0, - Set SCP6MD1,0 = {01} (output) */ - __raw_writew((data & 0x0fcf) | 0x1000, SCPCR); + struct sci_port *s = to_sci_port(port); + struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR; - data = __raw_readb(SCPDR); - /* Set /RTS2 (bit6) = 0 */ - __raw_writeb(data & 0xbf, SCPDR); + /* + * Use port-specific handler if provided. + */ + if (s->cfg->ops && s->cfg->ops->init_pins) { + s->cfg->ops->init_pins(port, cflag); + return; } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - unsigned short data; - if (port->mapbase == 0xffe00000) { - data = __raw_readw(PSCR); - data &= ~0x03cf; - if (!(cflag & CRTSCTS)) - data |= 0x0340; + /* + * For the generic path SCSPTR is necessary. Bail out if that's + * unavailable, too. + */ + if (!reg->size) + return; - __raw_writew(data, PSCR); - } -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR0); /* Set RTS = 1 */ + sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */ } -#elif defined(CONFIG_CPU_SH4) && !defined(CONFIG_CPU_SH4A) -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - if (!(cflag & CRTSCTS)) - __raw_writew(0x0080, SCSPTR2); /* Set RTS = 1 */ -} -#else -static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) -{ - /* Nothing to do */ -} -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCTFDR) & 0xff; -} - -static int scif_txroom(struct uart_port *port) +static int sci_txfill(struct uart_port *port) { - return SCIF_TXROOM_MAX - scif_txfill(port); -} + struct plat_sci_reg *reg; -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCRFDR) & 0xff; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -static int scif_txfill(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ + reg = sci_getreg(port, SCTFDR); + if (reg->size) return sci_in(port, SCTFDR) & 0xff; - else - /* SCIF2 */ + + reg = sci_getreg(port, SCFDR); + if (reg->size) return sci_in(port, SCFDR) >> 8; -} -static int scif_txroom(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000 || - port->mapbase == 0xffe08000) - /* SCIF0/1*/ - return SCIF_TXROOM_MAX - scif_txfill(port); - else - /* SCIF2 */ - return SCIF2_TXROOM_MAX - scif_txfill(port); + return !(sci_in(port, SCxSR) & SCI_TDRE); } -static int scif_rxfill(struct uart_port *port) -{ - if ((port->mapbase == 0xffe00000) || - (port->mapbase == 0xffe08000)) { - /* SCIF0/1*/ - return sci_in(port, SCRFDR) & 0xff; - } else { - /* SCIF2 */ - return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; - } -} -#elif defined(CONFIG_ARCH_SH7372) -static int scif_txfill(struct uart_port *port) +static int sci_txroom(struct uart_port *port) { - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) >> 8; - else - return sci_in(port, SCTFDR); + return port->fifosize - sci_txfill(port); } -static int scif_txroom(struct uart_port *port) +static int sci_rxfill(struct uart_port *port) { - return port->fifosize - scif_txfill(port); -} + struct plat_sci_reg *reg; -static int scif_rxfill(struct uart_port *port) -{ - if (port->type == PORT_SCIFA) - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; - else - return sci_in(port, SCRFDR); -} -#else -static int scif_txfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) >> 8; -} + reg = sci_getreg(port, SCRFDR); + if (reg->size) + return sci_in(port, SCRFDR) & 0xff; -static int scif_txroom(struct uart_port *port) -{ - return SCIF_TXROOM_MAX - scif_txfill(port); -} + reg = sci_getreg(port, SCFDR); + if (reg->size) + return sci_in(port, SCFDR) & ((port->fifosize << 1) - 1); -static int scif_rxfill(struct uart_port *port) -{ - return sci_in(port, SCFDR) & SCIF_RFDC_MASK; + return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; } -#endif -static int sci_txfill(struct uart_port *port) +/* + * SCI helper for checking the state of the muxed port/RXD pins. + */ +static inline int sci_rxd_in(struct uart_port *port) { - return !(sci_in(port, SCxSR) & SCI_TDRE); -} + struct sci_port *s = to_sci_port(port); -static int sci_txroom(struct uart_port *port) -{ - return !sci_txfill(port); -} + if (s->cfg->port_reg <= 0) + return 1; -static int sci_rxfill(struct uart_port *port) -{ - return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; + return !!__raw_readb(s->cfg->port_reg); } /* ********************************************************************** * @@ -406,10 +504,7 @@ static void sci_transmit_chars(struct uart_port *port) return; } - if (port->type == PORT_SCI) - count = sci_txroom(port); - else - count = scif_txroom(port); + count = sci_txroom(port); do { unsigned char c; @@ -464,13 +559,8 @@ static void sci_receive_chars(struct uart_port *port) return; while (1) { - if (port->type == PORT_SCI) - count = sci_rxfill(port); - else - count = scif_rxfill(port); - /* Don't copy more bytes than there is room for in the buffer */ - count = tty_buffer_request_room(tty, count); + count = tty_buffer_request_room(tty, sci_rxfill(port)); /* If for any reason we can't copy more data, we're done! */ if (count == 0) @@ -583,13 +673,19 @@ static int sci_handle_errors(struct uart_port *port) int copied = 0; unsigned short status = sci_in(port, SCxSR); struct tty_struct *tty = port->state->port.tty; + struct sci_port *s = to_sci_port(port); - if (status & SCxSR_ORER(port)) { - /* overrun error */ - if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) - copied++; + /* + * Handle overruns, if supported. + */ + if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { + if (status & (1 << s->cfg->overrun_bit)) { + /* overrun error */ + if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) + copied++; - dev_notice(port->dev, "overrun error"); + dev_notice(port->dev, "overrun error"); + } } if (status & SCxSR_FER(port)) { @@ -637,12 +733,15 @@ static int sci_handle_errors(struct uart_port *port) static int sci_handle_fifo_overrun(struct uart_port *port) { struct tty_struct *tty = port->state->port.tty; + struct sci_port *s = to_sci_port(port); + struct plat_sci_reg *reg; int copied = 0; - if (port->type != PORT_SCIF) + reg = sci_getreg(port, SCLSR); + if (!reg->size) return 0; - if ((sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { sci_out(port, SCLSR, 0); tty_insert_flip_char(tty, 0, TTY_OVERRUN); @@ -915,7 +1014,7 @@ static void sci_free_irq(struct sci_port *port) static unsigned int sci_tx_empty(struct uart_port *port) { unsigned short status = sci_in(port, SCxSR); - unsigned short in_tx_fifo = scif_txfill(port); + unsigned short in_tx_fifo = sci_txfill(port); return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; } @@ -1746,6 +1845,9 @@ static int __devinit sci_init_single(struct platform_device *dev, break; } + if (p->regtype == SCIx_PROBE_REGTYPE) + BUG_ON(sci_probe_regmap(p) != 0); + if (dev) { sci_port->iclk = clk_get(&dev->dev, "sci_ick"); if (IS_ERR(sci_port->iclk)) { @@ -1775,14 +1877,41 @@ static int __devinit sci_init_single(struct platform_device *dev, sci_port->break_timer.function = sci_break_timer; init_timer(&sci_port->break_timer); + /* + * Establish some sensible defaults for the error detection. + */ + if (!p->error_mask) + p->error_mask = (p->type == PORT_SCI) ? + SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; + + /* + * Establish sensible defaults for the overrun detection, unless + * the part has explicitly disabled support for it. + */ + if (p->overrun_bit != SCIx_NOT_SUPPORTED) { + if (p->type == PORT_SCI) + p->overrun_bit = 5; + else if (p->scbrr_algo_id == SCBRR_ALGO_4) + p->overrun_bit = 9; + else + p->overrun_bit = 0; + + /* + * Make the error mask inclusive of overrun detection, if + * supported. + */ + p->error_mask |= (1 << p->overrun_bit); + } + sci_port->cfg = p; port->mapbase = p->mapbase; port->type = p->type; port->flags = p->flags; + port->regshift = p->regshift; /* - * The UART port needs an IRQ value, so we peg this to the TX IRQ + * The UART port needs an IRQ value, so we peg this to the RX IRQ * for the multi-IRQ ports, which is where we are primarily * concerned with the shutdown path synchronization. * @@ -1790,6 +1919,9 @@ static int __devinit sci_init_single(struct platform_device *dev, */ port->irq = p->irqs[SCIx_RXI_IRQ]; + port->serial_in = sci_serial_in; + port->serial_out = sci_serial_out; + if (p->dma_dev) dev_dbg(port->dev, "DMA device %p, tx %d, rx %d\n", p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); @@ -1863,14 +1995,8 @@ static int __devinit serial_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - ret = uart_set_options(port, co, baud, parity, bits, flow); -#if defined(__H8300H__) || defined(__H8300S__) - /* disable rx interrupt */ - if (ret == 0) - sci_stop_rx(port); -#endif /* TODO: disable clock */ - return ret; + return uart_set_options(port, co, baud, parity, bits, flow); } static struct console serial_console = { diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index b04d937c911..e9bed038aa1 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -2,169 +2,14 @@ #include <linux/io.h> #include <linux/gpio.h> -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) -#include <asm/regs306x.h> -#endif -#if defined(CONFIG_H8S2678) -#include <asm/regs267x.h> -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ -# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCIF0 0xA4400000 -# define SCIF2 0xA4410000 -# define SCPCR 0xA4000116 -# define SCPDR 0xA4000136 -#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define PORT_PTCR 0xA405011EUL -# define PORT_PVCR 0xA4050122UL -# define SCIF_ORER 0x0200 /* overrun error bit */ -#elif defined(CONFIG_SH_RTS7751R2D) -# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ -# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) -# define SCSPTR1 0xffe0001c /* 8 bit SCI */ -# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) -# define SCSPTR0 0xfe600024 /* 16 bit SCIF */ -# define SCSPTR1 0xfe610024 /* 16 bit SCIF */ -# define SCSPTR2 0xfe620024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -# define SCSPTR0 0xA4400000 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -# define PACR 0xa4050100 -# define PBCR 0xa4050102 -#elif defined(CONFIG_CPU_SUBTYPE_SH7343) -# define SCSPTR0 0xffe00010 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7722) -# define PADR 0xA4050120 -# define PSDR 0xA405013e -# define PWDR 0xA4050166 -# define PSCR 0xA405011E -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7366) -# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ -# define SCSPTR0 SCPDR0 -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) -# define SCSPTR0 0xa4050160 -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) -# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_H83007) || defined(CONFIG_H83068) -# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) -#elif defined(CONFIG_H8S2678) -# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) -#elif defined(CONFIG_CPU_SUBTYPE_SH7757) -# define SCSPTR0 0xfe4b0020 -# define SCIF_ORER 0x0001 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7770) -# define SCSPTR0 0xff923020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) -# define SCSPTR0 0xffe00024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -# define SCSPTR0 0xffea0024 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ - defined(CONFIG_CPU_SUBTYPE_SH7203) || \ - defined(CONFIG_CPU_SUBTYPE_SH7206) || \ - defined(CONFIG_CPU_SUBTYPE_SH7263) -# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7619) -# define SCSPTR0 0xf8400020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* overrun error bit */ -#elif defined(CONFIG_CPU_SUBTYPE_SHX3) -# define SCSPTR0 0xffc30020 /* 16 bit SCIF */ -# define SCIF_ORER 0x0001 /* Overrun error bit */ -#else -# error CPU subtype not defined -#endif - -/* SCxSR SCI */ -#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ - -#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER) - -/* SCxSR SCIF */ -#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ -#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -# define SCIF_ORER 0x0200 -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) -# define SCIF_RFDC_MASK 0x007f -# define SCIF_TXROOM_MAX 64 -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK ) -# define SCIF_RFDC_MASK 0x007f -# define SCIF_TXROOM_MAX 64 -/* SH7763 SCIF2 support */ -# define SCIF2_RFDC_MASK 0x001f -# define SCIF2_TXROOM_MAX 16 -#else -# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) -# define SCIF_RFDC_MASK 0x001f -# define SCIF_TXROOM_MAX 16 -#endif - -#ifndef SCIF_ORER -#define SCIF_ORER 0x0000 -#endif - #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) -#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) #define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) #define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) #define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) -#define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) + +#define SCxSR_ERRORS(port) (to_sci_port(port)->cfg->error_mask) #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ @@ -191,278 +36,3 @@ #define SCI_MAJOR 204 #define SCI_MINOR_START 8 - -#define SCI_IN(size, offset) \ - if ((size) == 8) { \ - return ioread8(port->membase + (offset)); \ - } else { \ - return ioread16(port->membase + (offset)); \ - } -#define SCI_OUT(size, offset, value) \ - if ((size) == 8) { \ - iowrite8(value, port->membase + (offset)); \ - } else if ((size) == 16) { \ - iowrite16(value, port->membase + (offset)); \ - } - -#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_IN(scif_size, scif_offset) \ - } else { /* PORT_SCI or PORT_SCIFA */ \ - SCI_IN(sci_size, sci_offset); \ - } \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - if (port->type == PORT_SCIF || port->type == PORT_SCIFB) { \ - SCI_OUT(scif_size, scif_offset, value) \ - } else { /* PORT_SCI or PORT_SCIFA */ \ - SCI_OUT(sci_size, sci_offset, value); \ - } \ - } - -#ifdef CONFIG_H8300 -/* h8300 don't have SCIF */ -#define CPU_SCIF_FNS(name) \ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - return 0; \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - } -#else -#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ - static inline unsigned int sci_##name##_in(struct uart_port *port) \ - { \ - SCI_IN(scif_size, scif_offset); \ - } \ - static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ - { \ - SCI_OUT(scif_size, scif_offset, value); \ - } -#endif - -#define CPU_SCI_FNS(name, sci_offset, sci_size) \ - static inline unsigned int sci_##name##_in(struct uart_port* port) \ - { \ - SCI_IN(sci_size, sci_offset); \ - } \ - static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \ - { \ - SCI_OUT(sci_size, sci_offset, value); \ - } - -#if defined(CONFIG_CPU_SH3) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH7367) -#define SCIF_FNS(name, scif_offset, scif_size) \ - CPU_SCIF_FNS(name, scif_offset, scif_size) -#elif defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) || \ - defined(CONFIG_ARCH_SH73A0) -#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) \ - CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scifb_offset, sh4_scifb_size) -#define SCIF_FNS(name, scif_offset, scif_size) \ - CPU_SCIF_FNS(name, scif_offset, scif_size) -#else -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) -#endif -#elif defined(__H8300H__) || defined(__H8300S__) -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) - #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) - #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#else -#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ - sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ - h8_sci_offset, h8_sci_size) \ - CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) -#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ - CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH7367) - -SCIF_FNS(SCSMR, 0x00, 16) -SCIF_FNS(SCBRR, 0x04, 8) -SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCxSR, 0x14, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCxTDR, 0x20, 8) -SCIF_FNS(SCxRDR, 0x24, 8) -SCIF_FNS(SCLSR, 0x00, 0) -#elif defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) || \ - defined(CONFIG_ARCH_SH73A0) -SCIF_FNS(SCSMR, 0x00, 16) -SCIF_FNS(SCBRR, 0x04, 8) -SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCTDSR, 0x0c, 16) -SCIF_FNS(SCFER, 0x10, 16) -SCIF_FNS(SCxSR, 0x14, 16) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCTFDR, 0x38, 16) -SCIF_FNS(SCRFDR, 0x3c, 16) -SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8) -SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8) -SCIF_FNS(SCLSR, 0x00, 0) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) -SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16) -SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8) -SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) -SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) -SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) -SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) -SCIx_FNS(SCSPTR, 0, 0, 0, 0) -SCIF_FNS(SCFCR, 0x18, 16) -SCIF_FNS(SCFDR, 0x1c, 16) -SCIF_FNS(SCLSR, 0x24, 16) -#else -/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ -/* name off sz off sz off sz off sz off sz*/ -SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8) -SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8) -SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8) -SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8) -SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) -SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) -SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) -SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#elif defined(CONFIG_CPU_SUBTYPE_SH7763) -SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) -SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) -SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) -SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#else -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7722) -SCIF_FNS(SCSPTR, 0, 0, 0, 0) -#else -SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) -#endif -SCIF_FNS(SCLSR, 0, 0, 0x24, 16) -#endif -#endif -#define sci_in(port, reg) sci_##reg##_in(port) -#define sci_out(port, reg, value) sci_##reg##_out(port, value) - -/* H8/300 series SCI pins assignment */ -#if defined(__H8300H__) || defined(__H8300S__) -static const struct __attribute__((packed)) { - int port; /* GPIO port no */ - unsigned short rx,tx; /* GPIO bit no */ -} h8300_sci_pins[] = { -#if defined(CONFIG_H83007) || defined(CONFIG_H83068) - { /* SCI0 */ - .port = H8300_GPIO_P9, - .rx = H8300_GPIO_B2, - .tx = H8300_GPIO_B0, - }, - { /* SCI1 */ - .port = H8300_GPIO_P9, - .rx = H8300_GPIO_B3, - .tx = H8300_GPIO_B1, - }, - { /* SCI2 */ - .port = H8300_GPIO_PB, - .rx = H8300_GPIO_B7, - .tx = H8300_GPIO_B6, - } -#elif defined(CONFIG_H8S2678) - { /* SCI0 */ - .port = H8300_GPIO_P3, - .rx = H8300_GPIO_B2, - .tx = H8300_GPIO_B0, - }, - { /* SCI1 */ - .port = H8300_GPIO_P3, - .rx = H8300_GPIO_B3, - .tx = H8300_GPIO_B1, - }, - { /* SCI2 */ - .port = H8300_GPIO_P5, - .rx = H8300_GPIO_B1, - .tx = H8300_GPIO_B0, - } -#endif -}; -#endif - -#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7708) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xfffffe80) - return __raw_readb(SCPDR)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) -static inline int sci_rxd_in(struct uart_port *port) -{ - if (port->mapbase == 0xffe00000) - return __raw_readb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ - return 1; -} -#elif defined(__H8300H__) || defined(__H8300S__) -static inline int sci_rxd_in(struct uart_port *port) -{ - int ch = (port->mapbase - SMR0) >> 3; - return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; -} -#else /* default case for non-SCI processors */ -static inline int sci_rxd_in(struct uart_port *port) -{ - return 1; -} -#endif diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index a2afc9fbe18..4ca130a90ea 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -8,6 +8,8 @@ * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts) */ +#define SCIx_NOT_SUPPORTED (-1) + enum { SCBRR_ALGO_1, /* ((clk + 16 * bps) / (16 * bps) - 1) */ SCBRR_ALGO_2, /* ((clk + 16 * bps) / (32 * bps) - 1) */ @@ -25,6 +27,28 @@ enum { #define SCSCR_CKE1 (1 << 1) #define SCSCR_CKE0 (1 << 0) +/* SCxSR SCI */ +#define SCI_TDRE 0x80 +#define SCI_RDRF 0x40 +#define SCI_ORER 0x20 +#define SCI_FER 0x10 +#define SCI_PER 0x08 +#define SCI_TEND 0x04 + +#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) + +/* SCxSR SCIF */ +#define SCIF_ER 0x0080 +#define SCIF_TEND 0x0040 +#define SCIF_TDFE 0x0020 +#define SCIF_BRK 0x0010 +#define SCIF_FER 0x0008 +#define SCIF_PER 0x0004 +#define SCIF_RDF 0x0002 +#define SCIF_DR 0x0001 + +#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) + /* Offsets into the sci_port->irqs array */ enum { SCIx_ERI_IRQ, @@ -34,6 +58,22 @@ enum { SCIx_NR_IRQS, }; +enum { + SCIx_PROBE_REGTYPE, + + SCIx_SCI_REGTYPE, + SCIx_IRDA_REGTYPE, + SCIx_SCIFA_REGTYPE, + SCIx_SCIFB_REGTYPE, + SCIx_SH3_SCIF_REGTYPE, + SCIx_SH4_SCIF_REGTYPE, + SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE, + SCIx_SH4_SCIF_FIFODATA_REGTYPE, + SCIx_SH7705_SCIF_REGTYPE, + + SCIx_NR_REGTYPES, +}; + #define SCIx_IRQ_MUXED(irq) \ { \ [SCIx_ERI_IRQ] = (irq), \ @@ -42,8 +82,24 @@ enum { [SCIx_BRI_IRQ] = (irq), \ } +/* + * SCI register subset common for all port types. + * Not all registers will exist on all parts. + */ +enum { + SCSMR, SCBRR, SCSCR, SCxSR, + SCFCR, SCFDR, SCxTDR, SCxRDR, + SCLSR, SCTFDR, SCRFDR, SCSPTR, + + SCIx_NR_REGS, +}; + struct device; +struct plat_sci_port_ops { + void (*init_pins)(struct uart_port *, unsigned int cflag); +}; + /* * Platform device specific platform_data struct */ @@ -56,6 +112,18 @@ struct plat_sci_port { unsigned int scbrr_algo_id; /* SCBRR calculation algo */ unsigned int scscr; /* SCSCR initialization */ + /* + * Platform overrides if necessary, defaults otherwise. + */ + int overrun_bit; + unsigned int error_mask; + + int port_reg; + unsigned char regshift; + unsigned char regtype; + + struct plat_sci_port_ops *ops; + struct device *dma_dev; unsigned int dma_slave_tx; |