diff options
| -rw-r--r-- | drivers/acpi/acpica/acevents.h | 7 | ||||
| -rw-r--r-- | drivers/acpi/acpica/aclocal.h | 5 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evgpe.c | 153 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evgpeblk.c | 143 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evxface.c | 20 | ||||
| -rw-r--r-- | drivers/acpi/acpica/evxfevnt.c | 191 | ||||
| -rw-r--r-- | drivers/acpi/acpica/exoparg2.c | 27 | ||||
| -rw-r--r-- | drivers/acpi/scan.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/system.c | 5 | ||||
| -rw-r--r-- | include/acpi/acexcep.h | 2 | ||||
| -rw-r--r-- | include/acpi/acpixf.h | 11 | ||||
| -rw-r--r-- | include/acpi/actypes.h | 42 |
12 files changed, 346 insertions, 262 deletions
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 3e6ba99e405..5e094a28cf5 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -85,6 +85,10 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, u32 gpe_number); +struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number, + struct acpi_gpe_block_info + *gpe_block); + /* * evgpeblk */ @@ -118,9 +122,6 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list); -acpi_status -acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info); - acpi_status acpi_ev_gpe_initialize(void); /* diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 24b8faa5c39..5a6203a40c3 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -427,8 +427,8 @@ struct acpi_gpe_event_info { struct acpi_gpe_register_info *register_info; /* Backpointer to register info */ u8 flags; /* Misc info about this GPE */ u8 gpe_number; /* This GPE */ - u8 runtime_count; - u8 wakeup_count; + u8 runtime_count; /* References to a run GPE */ + u8 wakeup_count; /* References to a wake GPE */ }; /* Information about a GPE register pair, one per each status/enable pair in an array */ @@ -454,6 +454,7 @@ struct acpi_gpe_block_info { struct acpi_gpe_event_info *event_info; /* One for each GPE */ struct acpi_generic_address block_address; /* Base address of the block */ u32 register_count; /* Number of register pairs in block */ + u16 gpe_count; /* Number of individual GPEs in block */ u8 block_base_number; /* Base GPE number for this block */ }; diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index b9d50ef9f3e..deb26f4c662 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -60,7 +60,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context); * * RETURN: Status * - * DESCRIPTION: Updates GPE register enable masks based on the GPE type + * DESCRIPTION: Updates GPE register enable masks based upon whether there are + * references (either wake or run) to this GPE * ******************************************************************************/ @@ -81,14 +82,20 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) (1 << (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number)); + /* Clear the wake/run bits up front */ + ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake, register_bit); ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit); - if (gpe_event_info->runtime_count) + /* Set the mask bits only if there are references to this GPE */ + + if (gpe_event_info->runtime_count) { ACPI_SET_BIT(gpe_register_info->enable_for_run, register_bit); + } - if (gpe_event_info->wakeup_count) + if (gpe_event_info->wakeup_count) { ACPI_SET_BIT(gpe_register_info->enable_for_wake, register_bit); + } return_ACPI_STATUS(AE_OK); } @@ -101,7 +108,10 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) * * RETURN: Status * - * DESCRIPTION: Enable a GPE based on the GPE type + * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless + * of type or number of references. + * + * Note: The GPE lock should be already acquired when this function is called. * ******************************************************************************/ @@ -109,20 +119,36 @@ acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) { acpi_status status; + ACPI_FUNCTION_TRACE(ev_enable_gpe); - /* Make sure HW enable masks are updated */ + + /* + * We will only allow a GPE to be enabled if it has either an + * associated method (_Lxx/_Exx) or a handler. Otherwise, the + * GPE will be immediately disabled by acpi_ev_gpe_dispatch the + * first time it fires. + */ + if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { + return_ACPI_STATUS(AE_NO_HANDLER); + } + + /* Ensure the HW enable masks are current */ status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); + } + + /* Clear the GPE (of stale events) */ - /* Clear the GPE (of stale events), then enable it */ status = acpi_hw_clear_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); + } /* Enable the requested GPE */ + status = acpi_hw_write_gpe_enable_reg(gpe_event_info); return_ACPI_STATUS(status); } @@ -135,7 +161,10 @@ acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) * * RETURN: Status * - * DESCRIPTION: Disable a GPE based on the GPE type + * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE, + * regardless of the type or number of references. + * + * Note: The GPE lock should be already acquired when this function is called. * ******************************************************************************/ @@ -145,24 +174,71 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) ACPI_FUNCTION_TRACE(ev_disable_gpe); - /* Make sure HW enable masks are updated */ + + /* + * Note: Always disable the GPE, even if we think that that it is already + * disabled. It is possible that the AML or some other code has enabled + * the GPE behind our back. + */ + + /* Ensure the HW enable masks are current */ status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); + } /* - * Even if we don't know the GPE type, make sure that we always - * disable it. low_disable_gpe will just clear the enable bit for this - * GPE and write it. It will not write out the current GPE enable mask, - * since this may inadvertently enable GPEs too early, if a rogue GPE has - * come in during ACPICA initialization - possibly as a result of AML or - * other code that has enabled the GPE. + * Always H/W disable this GPE, even if we don't know the GPE type. + * Simply clear the enable bit for this particular GPE, but do not + * write out the current GPE enable mask since this may inadvertently + * enable GPEs too early. An example is a rogue GPE that has arrived + * during ACPICA initialization - possibly because AML or other code + * has enabled the GPE. */ status = acpi_hw_low_disable_gpe(gpe_event_info); return_ACPI_STATUS(status); } + +/******************************************************************************* + * + * FUNCTION: acpi_ev_low_get_gpe_info + * + * PARAMETERS: gpe_number - Raw GPE number + * gpe_block - A GPE info block + * + * RETURN: A GPE event_info struct. NULL if not a valid GPE (The gpe_number + * is not within the specified GPE block) + * + * DESCRIPTION: Returns the event_info struct associated with this GPE. This is + * the low-level implementation of ev_get_gpe_event_info. + * + ******************************************************************************/ + +struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number, + struct acpi_gpe_block_info + *gpe_block) +{ + u32 gpe_index; + + /* + * Validate that the gpe_number is within the specified gpe_block. + * (Two steps) + */ + if (!gpe_block || (gpe_number < gpe_block->block_base_number)) { + return (NULL); + } + + gpe_index = gpe_number - gpe_block->block_base_number; + if (gpe_index >= gpe_block->gpe_count) { + return (NULL); + } + + return (&gpe_block->event_info[gpe_index]); +} + + /******************************************************************************* * * FUNCTION: acpi_ev_get_gpe_event_info @@ -184,7 +260,7 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, u32 gpe_number) { union acpi_operand_object *obj_desc; - struct acpi_gpe_block_info *gpe_block; + struct acpi_gpe_event_info *gpe_info; u32 i; ACPI_FUNCTION_ENTRY(); @@ -196,17 +272,11 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, /* Examine GPE Block 0 and 1 (These blocks are permanent) */ for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) { - gpe_block = acpi_gbl_gpe_fadt_blocks[i]; - if (gpe_block) { - if ((gpe_number >= gpe_block->block_base_number) - && (gpe_number < - gpe_block->block_base_number + - (gpe_block->register_count * 8))) { - return (&gpe_block-> - event_info[gpe_number - - gpe_block-> - block_base_number]); - } + gpe_info = acpi_ev_low_get_gpe_info(gpe_number, + acpi_gbl_gpe_fadt_blocks + [i]); + if (gpe_info) { + return (gpe_info); } } @@ -223,16 +293,8 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, return (NULL); } - gpe_block = obj_desc->device.gpe_block; - - if ((gpe_number >= gpe_block->block_base_number) && - (gpe_number < - gpe_block->block_base_number + (gpe_block->register_count * 8))) { - return (&gpe_block-> - event_info[gpe_number - gpe_block->block_base_number]); - } - - return (NULL); + return (acpi_ev_low_get_gpe_info + (gpe_number, obj_desc->device.gpe_block)); } /******************************************************************************* @@ -389,7 +451,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) return_VOID; } - /* Set the GPE flags for return to enabled state */ + /* Update the GPE register masks for return to enabled state */ (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); @@ -569,15 +631,18 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) default: - /* No handler or method to run! */ - + /* + * No handler or method to run! + * 03/2010: This case should no longer be possible. We will not allow + * a GPE to be enabled if it has no handler or method. + */ ACPI_ERROR((AE_INFO, "No handler or method for GPE[0x%2X], disabling event", gpe_number)); /* - * Disable the GPE. The GPE will remain disabled until the ACPICA - * Core Subsystem is restarted, or a handler is installed. + * Disable the GPE. The GPE will remain disabled a handler + * is installed or ACPICA is restarted. */ status = acpi_ev_disable_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index fa47e3522ab..85ded1f2540 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -51,7 +51,7 @@ ACPI_MODULE_NAME("evgpeblk") /* Local prototypes */ static acpi_status -acpi_ev_save_method_info(acpi_handle obj_handle, +acpi_ev_match_gpe_method(acpi_handle obj_handle, u32 level, void *obj_desc, void **return_value); static acpi_status @@ -104,9 +104,7 @@ u8 acpi_ev_valid_gpe_event(struct acpi_gpe_event_info *gpe_event_info) while (gpe_block) { if ((&gpe_block->event_info[0] <= gpe_event_info) && - (&gpe_block->event_info[((acpi_size) - gpe_block-> - register_count) * 8] > + (&gpe_block->event_info[gpe_block->gpe_count] > gpe_event_info)) { return (TRUE); } @@ -229,7 +227,7 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /******************************************************************************* * - * FUNCTION: acpi_ev_save_method_info + * FUNCTION: acpi_ev_match_gpe_method * * PARAMETERS: Callback from walk_namespace * @@ -241,8 +239,7 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, * information for quick lookup during GPE dispatch * * The name of each GPE control method is of the form: - * "_Lxx" or "_Exx" - * Where: + * "_Lxx" or "_Exx", where: * L - means that the GPE is level triggered * E - means that the GPE is edge triggered * xx - is the GPE number [in HEX] @@ -250,9 +247,11 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, ******************************************************************************/ static acpi_status -acpi_ev_save_method_info(acpi_handle obj_handle, +acpi_ev_match_gpe_method(acpi_handle obj_handle, u32 level, void *obj_desc, void **return_value) { + struct acpi_namespace_node *method_node = + ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); struct acpi_gpe_block_info *gpe_block = (void *)obj_desc; struct acpi_gpe_event_info *gpe_event_info; u32 gpe_number; @@ -262,21 +261,25 @@ acpi_ev_save_method_info(acpi_handle obj_handle, ACPI_FUNCTION_TRACE(ev_save_method_info); /* - * _Lxx and _Exx GPE method support + * Match and decode the _Lxx and _Exx GPE method names * - * 1) Extract the name from the object and convert to a string + * 1) Extract the method name and null terminate it */ - ACPI_MOVE_32_TO_32(name, - &((struct acpi_namespace_node *)obj_handle)->name. - integer); + ACPI_MOVE_32_TO_32(name, &method_node->name.integer); name[ACPI_NAME_SIZE] = 0; + /* 2) Name must begin with an underscore */ + + if (name[0] != '_') { + return_ACPI_STATUS(AE_OK); /* Ignore this method */ + } + /* - * 2) Edge/Level determination is based on the 2nd character + * 3) Edge/Level determination is based on the 2nd character * of the method name * - * NOTE: Default GPE type is RUNTIME. May be changed later to WAKE - * if a _PRW object is found that points to this GPE. + * NOTE: Default GPE type is RUNTIME only. Later, if a _PRW object is + * found that points to this GPE, the ACPI_GPE_CAN_WAKE flag is set. */ switch (name[1]) { case 'L': @@ -288,7 +291,7 @@ acpi_ev_save_method_info(acpi_handle obj_handle, break; default: - /* Unknown method type, just ignore it! */ + /* Unknown method type, just ignore it */ ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Ignoring unknown GPE method type: %s " @@ -296,7 +299,7 @@ acpi_ev_save_method_info(acpi_handle obj_handle, return_ACPI_STATUS(AE_OK); } - /* Convert the last two characters of the name to the GPE Number */ + /* 4) The last two characters of the name are the hex GPE Number */ gpe_number = ACPI_STRTOUL(&name[2], NULL, 16); if (gpe_number == ACPI_UINT32_MAX) { @@ -311,28 +314,22 @@ acpi_ev_save_method_info(acpi_handle obj_handle, /* Ensure that we have a valid GPE number for this GPE block */ - if ((gpe_number < gpe_block->block_base_number) || - (gpe_number >= (gpe_block->block_base_number + - (gpe_block->register_count * 8)))) { + gpe_event_info = acpi_ev_low_get_gpe_info(gpe_number, gpe_block); + if (!gpe_event_info) { /* - * Not valid for this GPE block, just ignore it. However, it may be - * valid for a different GPE block, since GPE0 and GPE1 methods both - * appear under \_GPE. + * This gpe_number is not valid for this GPE block, just ignore it. + * However, it may be valid for a different GPE block, since GPE0 + * and GPE1 methods both appear under \_GPE. */ return_ACPI_STATUS(AE_OK); } /* - * Now we can add this information to the gpe_event_info block for use - * during dispatch of this GPE. + * Add the GPE information from above to the gpe_event_info block for + * use during dispatch of this GPE. */ - gpe_event_info = - &gpe_block->event_info[gpe_number - gpe_block->block_base_number]; - - gpe_event_info->flags = (u8) (type | ACPI_GPE_DISPATCH_METHOD); - - gpe_event_info->dispatch.method_node = - (struct acpi_namespace_node *)obj_handle; + gpe_event_info->flags = (u8)(type | ACPI_GPE_DISPATCH_METHOD); + gpe_event_info->dispatch.method_node = method_node; ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Registered GPE method %s as GPE number 0x%.2X\n", @@ -351,7 +348,7 @@ acpi_ev_save_method_info(acpi_handle obj_handle, * * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a * Device. Run the _PRW method. If present, extract the GPE - * number and mark the GPE as a WAKE GPE. + * number and mark the GPE as a CAN_WAKE GPE. * ******************************************************************************/ @@ -377,7 +374,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, ACPI_BTYPE_PACKAGE, &pkg_desc); if (ACPI_FAILURE(status)) { - /* Ignore all errors from _PRW, we don't want to abort the subsystem */ + /* Ignore all errors from _PRW, we don't want to abort the walk */ return_ACPI_STATUS(AE_OK); } @@ -439,13 +436,13 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle, * 2) The GPE index(number) is within the range of the Gpe Block * associated with the GPE device. */ - if ((gpe_device == target_gpe_device) && - (gpe_number >= gpe_block->block_base_number) && - (gpe_number < gpe_block->block_base_number + - (gpe_block->register_count * 8))) { - gpe_event_info = &gpe_block->event_info[gpe_number - - gpe_block-> - block_base_number]; + if (gpe_device != target_gpe_device) { + goto cleanup; + } + + gpe_event_info = acpi_ev_low_get_gpe_info(gpe_number, gpe_block); + if (gpe_event_info) { + /* This GPE can wake the system */ gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; } @@ -705,8 +702,7 @@ acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block) acpi_os_release_lock(acpi_gbl_gpe_lock, flags); } - acpi_current_gpe_count -= - gpe_block->register_count * ACPI_GPE_REGISTER_WIDTH; + acpi_current_gpe_count -= gpe_block->gpe_count; /* Free the gpe_block */ @@ -760,9 +756,7 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block) * Allocate the GPE event_info block. There are eight distinct GPEs * per register. Initialization to zeros is sufficient. */ - gpe_event_info = ACPI_ALLOCATE_ZEROED(((acpi_size) gpe_block-> - register_count * - ACPI_GPE_REGISTER_WIDTH) * + gpe_event_info = ACPI_ALLOCATE_ZEROED((acpi_size) gpe_block->gpe_count * sizeof(struct acpi_gpe_event_info)); if (!gpe_event_info) { @@ -897,6 +891,7 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, /* Initialize the new GPE block */ gpe_block->node = gpe_device; + gpe_block->gpe_count = (u16)(register_count * ACPI_GPE_REGISTER_WIDTH); gpe_block->register_count = register_count; gpe_block->block_base_number = gpe_block_base_number; @@ -925,7 +920,7 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device, ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK, - acpi_ev_save_method_info, NULL, + acpi_ev_match_gpe_method, NULL, gpe_block, NULL); /* Return the new block */ @@ -938,14 +933,13 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, "GPE %02X to %02X [%4.4s] %u regs on int 0x%X\n", (u32) gpe_block->block_base_number, (u32) (gpe_block->block_base_number + - ((gpe_block->register_count * - ACPI_GPE_REGISTER_WIDTH) - 1)), + (gpe_block->gpe_count - 1)), gpe_device->name.ascii, gpe_block->register_count, interrupt_number)); /* Update global count of currently available GPEs */ - acpi_current_gpe_count += register_count * ACPI_GPE_REGISTER_WIDTH; + acpi_current_gpe_count += gpe_block->gpe_count; return_ACPI_STATUS(AE_OK); } @@ -969,10 +963,13 @@ acpi_status acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, struct acpi_gpe_block_info *gpe_block) { + acpi_status status; struct acpi_gpe_event_info *gpe_event_info; struct acpi_gpe_walk_info gpe_info; u32 wake_gpe_count; u32 gpe_enabled_count; + u32 gpe_index; + u32 gpe_number; u32 i; u32 j; @@ -998,50 +995,62 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, gpe_info.gpe_block = gpe_block; gpe_info.gpe_device = gpe_device; - acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, + status = acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK, acpi_ev_match_prw_and_gpe, NULL, &gpe_info, NULL); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "While executing _PRW methods")); + } } /* - * Enable all GPEs that have a corresponding method and aren't + * Enable all GPEs that have a corresponding method and are not * capable of generating wakeups. Any other GPEs within this block - * must be enabled via the acpi_enable_gpe() interface. + * must be enabled via the acpi_enable_gpe interface. */ wake_gpe_count = 0; gpe_enabled_count = 0; - if (gpe_device == acpi_gbl_fadt_gpe_device) + + if (gpe_device == acpi_gbl_fadt_gpe_device) { gpe_device = NULL; + } for (i = 0; i < gpe_block->register_count; i++) { for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { - acpi_status status; - acpi_size gpe_index; - int gpe_number; /* Get the info block for this particular GPE */ - gpe_index = (acpi_size)i * ACPI_GPE_REGISTER_WIDTH + j; + + gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j; gpe_event_info = &gpe_block->event_info[gpe_index]; if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) { wake_gpe_count++; - if (acpi_gbl_leave_wake_gpes_disabled) + if (acpi_gbl_leave_wake_gpes_disabled) { continue; + } } - if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)) + /* Ignore GPEs that have no corresponding _Lxx/_Exx method */ + + if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)) { continue; + } + + /* Enable this GPE */ gpe_number = gpe_index + gpe_block->block_base_number; status = acpi_enable_gpe(gpe_device, gpe_number, - ACPI_GPE_TYPE_RUNTIME); - if (ACPI_FAILURE(status)) - ACPI_ERROR((AE_INFO, - "Failed to enable GPE %02X\n", + ACPI_GPE_TYPE_RUNTIME); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not enable GPE 0x%02X", gpe_number)); - else - gpe_enabled_count++; + continue; + } + + gpe_enabled_count++; } } diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index ca048233d8d..cc825023012 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -682,14 +682,13 @@ acpi_install_gpe_handler(acpi_handle gpe_device, /* Parameter validation */ - if ((!address) || (type > ACPI_GPE_XRUPT_TYPE_MASK)) { - status = AE_BAD_PARAMETER; - goto exit; + if ((!address) || (type & ~ACPI_GPE_XRUPT_TYPE_MASK)) { + return_ACPI_STATUS(AE_BAD_PARAMETER); } status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { - goto exit; + return_ACPI_STATUS(status); } /* Ensure that we have a valid GPE number */ @@ -720,6 +719,13 @@ acpi_install_gpe_handler(acpi_handle gpe_device, handler->context = context; handler->method_node = gpe_event_info->dispatch.method_node; + /* Disable the GPE before installing the handler */ + + status = acpi_ev_disable_gpe(gpe_event_info); + if (ACPI_FAILURE (status)) { + goto unlock_and_exit; + } + /* Install the handler */ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); @@ -733,12 +739,8 @@ acpi_install_gpe_handler(acpi_handle gpe_device, acpi_os_release_lock(acpi_gbl_gpe_lock, flags); - unlock_and_exit: +unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - exit: - if (ACPI_FAILURE(status)) - ACPI_EXCEPTION((AE_INFO, status, - "Installing notify handler failed")); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 5ff32c78ea2..7c7bbb4d402 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -203,21 +203,26 @@ ACPI_EXPORT_SYMBOL(acpi_enable_event) * * FUNCTION: acpi_set_gpe * - * PARAMETERS: gpe_device - Parent GPE Device + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 * gpe_number - GPE level within the GPE block - * action - Enable or disable - * Called from ISR or not + * action - ACPI_GPE_ENABLE or ACPI_GPE_DISABLE * * RETURN: Status * - * DESCRIPTION: Enable or disable an ACPI event (general purpose) + * DESCRIPTION: Enable or disable an individual GPE. This function bypasses + * the reference count mechanism used in the acpi_enable_gpe and + * acpi_disable_gpe interfaces -- and should be used with care. + * + * Note: Typically used to disable a runtime GPE for short period of time, + * then re-enable it, without disturbing the existing reference counts. This + * is useful, for example, in the Embedded Controller (EC) driver. * ******************************************************************************/ acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action) { - acpi_status status = AE_OK; - acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; + acpi_status status; + acpi_cpu_flags flags; ACPI_FUNCTION_TRACE(acpi_set_gpe); @@ -243,7 +248,6 @@ acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action) break; default: - ACPI_ERROR((AE_INFO, "Invalid action\n")); status = AE_BAD_PARAMETER; break; } @@ -259,25 +263,31 @@ ACPI_EXPORT_SYMBOL(acpi_set_gpe) * * FUNCTION: acpi_enable_gpe * - * PARAMETERS: gpe_device - Parent GPE Device + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 * gpe_number - GPE level within the GPE block - * type - Purpose the GPE will be used for + * gpe_type - ACPI_GPE_TYPE_RUNTIME or ACPI_GPE_TYPE_WAKE + * or both * * RETURN: Status * - * DESCRIPTION: Take a reference to a GPE and enable it if necessary + * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is + * hardware-enabled (for runtime GPEs), or the GPE register mask + * is updated (for wake GPEs). * ******************************************************************************/ -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type) +acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type) { acpi_status status = AE_OK; - acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; ACPI_FUNCTION_TRACE(acpi_enable_gpe); - if (type & ~ACPI_GPE_TYPE_WAKE_RUN) + /* Parameter validation */ + + if (!gpe_type || (gpe_type & ~ACPI_GPE_TYPE_WAKE_RUN)) { return_ACPI_STATUS(AE_BAD_PARAMETER); + } flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); @@ -289,26 +299,43 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type) goto unlock_and_exit; } - if (type & ACPI_GPE_TYPE_RUNTIME) { - if (++gpe_event_info->runtime_count == 1) { + if (gpe_type & ACPI_GPE_TYPE_RUNTIME) { + if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) { + status = AE_LIMIT; /* Too many references */ + goto unlock_and_exit; + } + + gpe_event_info->runtime_count++; + if (gpe_event_info->runtime_count == 1) { status = acpi_ev_enable_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count--; + goto unlock_and_exit; + } } } - if (type & ACPI_GPE_TYPE_WAKE) { + if (gpe_type & ACPI_GPE_TYPE_WAKE) { + /* The GPE must have the ability to wake the system */ + if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { - status = AE_BAD_PARAMETER; + status = AE_TYPE; + goto unlock_and_exit; + } + + if (gpe_event_info->wakeup_count == ACPI_UINT8_MAX) { + status = AE_LIMIT; /* Too many references */ goto unlock_and_exit; } /* - * Wake-up GPEs are only enabled right prior to putting the - * system into a sleep state. + * Update the enable mask on the first wakeup reference. Wake GPEs + * are only hardware-enabled just before sleeping. */ - if (++gpe_event_info->wakeup_count == 1) - acpi_ev_update_gpe_enable_masks(gpe_event_info); + gpe_event_info->wakeup_count++; + if (gpe_event_info->wakeup_count == 1) { + (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); + } } unlock_and_exit: @@ -321,27 +348,34 @@ ACPI_EXPORT_SYMBOL(acpi_enable_gpe) * * FUNCTION: acpi_disable_gpe * - * PARAMETERS: gpe_device - Parent GPE Device + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 * gpe_number - GPE level within the GPE block - * type - Purpose the GPE won't be used for any more + * gpe_type - ACPI_GPE_TYPE_RUNTIME or ACPI_GPE_TYPE_WAKE + * or both * * RETURN: Status * - * DESCRIPTION: Release a reference to a GPE and disable it if necessary + * DESCRIPTION: Remove a reference to a GPE. When the last reference is + * removed, only then is the GPE disabled (for runtime GPEs), or + * the GPE mask bit disabled (for wake GPEs) * ******************************************************************************/ -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type) +acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type) { acpi_status status = AE_OK; - acpi_cpu_flags flags; struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; ACPI_FUNCTION_TRACE(acpi_disable_gpe); - if (type & ~ACPI_GPE_TYPE_WAKE_RUN) + /* Parameter validation */ + + if (!gpe_type || (gpe_type & ~ACPI_GPE_TYPE_WAKE_RUN)) { return_ACPI_STATUS(AE_BAD_PARAMETER); + } flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); @@ -350,18 +384,39 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type) goto unlock_and_exit; } - if ((type & ACPI_GPE_TYPE_RUNTIME) && gpe_event_info->runtime_count) { - if (--gpe_event_info->runtime_count == 0) + /* Hardware-disable a runtime GPE on removal of the last reference */ + + if (gpe_type & ACPI_GPE_TYPE_RUNTIME) { + if (!gpe_event_info->runtime_count) { + status = AE_LIMIT; /* There are no references to remove */ + goto unlock_and_exit; + } + + gpe_event_info->runtime_count--; + if (!gpe_event_info->runtime_count) { status = acpi_ev_disable_gpe(gpe_event_info); + if (ACPI_FAILURE(status)) { + gpe_event_info->runtime_count++; + goto unlock_and_exit; + } + } } - if ((type & ACPI_GPE_TYPE_WAKE) && gpe_event_info->wakeup_count) { - /* - * Wake-up GPEs are not enabled after leaving system sleep - * states, so we don't need to disable them here. - */ - if (--gpe_event_info->wakeup_count == 0) - acpi_ev_update_gpe_enable_masks(gpe_event_info); + /* + * Update masks for wake GPE on removal of the last reference. + * No need to hardware-disable wake GPEs here, they are not currently + * enabled. + */ + if (gpe_type & ACPI_GPE_TYPE_WAKE) { + if (!gpe_event_info->wakeup_count) { + status = AE_LIMIT; /* There are no references to remove */ + goto unlock_and_exit; + } + + gpe_event_info->wakeup_count--; + if (!gpe_event_info->wakeup_count) { + (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); + } } unlock_and_exit: @@ -465,30 +520,23 @@ ACPI_EXPORT_SYMBOL(acpi_clear_event) * * FUNCTION: acpi_clear_gpe * - * PARAMETERS: gpe_device - Parent GPE Device + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 * gpe_number - GPE level within the GPE block - * Flags - Called from an ISR or not * * RETURN: Status * * DESCRIPTION: Clear an ACPI event (general purpose) * ******************************************************************************/ -acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) +acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; ACPI_FUNCTION_TRACE(acpi_clear_gpe); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -501,9 +549,7 @@ acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) status = acpi_hw_clear_gpe(gpe_event_info); unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -569,9 +615,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_event_status) * * FUNCTION: acpi_get_gpe_status * - * PARAMETERS: gpe_device - Parent GPE Device + * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 * gpe_number - GPE level within the GPE block - * Flags - Called from an ISR or not * event_status - Where the current status of the event will * be returned * @@ -582,21 +627,15 @@ ACPI_EXPORT_SYMBOL(acpi_get_event_status) ******************************************************************************/ acpi_status acpi_get_gpe_status(acpi_handle gpe_device, - u32 gpe_number, u32 flags, acpi_event_status * event_status) + u32 gpe_number, acpi_event_status *event_status) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; + acpi_cpu_flags flags; ACPI_FUNCTION_TRACE(acpi_get_gpe_status); - /* Use semaphore lock if not executing at interrupt level */ - - if (flags & ACPI_NOT_ISR) { - status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Ensure that we have a valid GPE number */ @@ -614,9 +653,7 @@ acpi_get_gpe_status(acpi_handle gpe_device, *event_status |= ACPI_EVENT_FLAG_HANDLE; unlock_and_exit: - if (flags & ACPI_NOT_ISR) { - (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); - } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -673,20 +710,15 @@ acpi_install_gpe_block(acpi_handle gpe_device, goto unlock_and_exit; } - /* Run the _PRW methods and enable the GPEs */ - - status = acpi_ev_initialize_gpe_block(node, gpe_block); - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } - - /* Get the device_object attached to the node */ + /* Install block in the device_object attached to the node */ obj_desc = acpi_ns_get_attached_object(node); if (!obj_desc) { - /* No object, create a new one */ - + /* + * No object, create a new one (Device nodes do not always have + * an attached object) + */ obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE); if (!obj_desc) { status = AE_NO_MEMORY; @@ -705,10 +737,14 @@ acpi_install_gpe_block(acpi_handle gpe_device, } } - /* Install the GPE block in the device_object */ + /* Now install the GPE block in the device_object */ obj_desc->device.gpe_block = gpe_block; + /* Run the _PRW methods and enable the runtime GPEs in the new block */ + + status = acpi_ev_initialize_gpe_block(node, gpe_block); + unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); return_ACPI_STATUS(status); @@ -839,8 +875,7 @@ acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /* Increment Index by the number of GPEs in this block */ - info->next_block_base_index += - (gpe_block->register_count * ACPI_GPE_REGISTER_WIDTH); + info->next_block_base_index += gpe_block->gpe_count; if (info->index < info->next_block_base_index) { /* diff --git a/drivers/acpi/acpica/exoparg2.c b/drivers/acpi/acpica/exoparg2.c index 3f3f48bb2dc..10e104cf0fb 100644 --- a/drivers/acpi/acpica/exoparg2.c +++ b/drivers/acpi/acpica/exoparg2.c @@ -119,33 +119,6 @@ acpi_status acpi_ex_opcode_2A_0T_0R(struct acpi_walk_state *walk_state) status = AE_AML_OPERAND_TYPE; break; } -#ifdef ACPI_GPE_NOTIFY_CHECK - /* - * GPE method wake/notify check. Here, we want to ensure that we - * don't receive any "DeviceWake" Notifies from a GPE _Lxx or _Exx - * GPE method during system runtime. If we do, the GPE is marked - * as "wake-only" and disabled. - * - * 1) Is the Notify() value == device_wake? - * 2) Is this a GPE deferred method? (An _Lxx or _Exx method) - * 3) Did the original GPE happen at system runtime? - * (versus during wake) - * - * If all three cases are true, this is a wake-only GPE that should - * be disabled at runtime. - */ - if (value == 2) { /* device_wake */ - status = - acpi_ev_check_for_wake_only_gpe(walk_state-> - gpe_event_info); - if (ACPI_FAILURE(status)) { - - /* AE_WAKE_ONLY_GPE only error, means ignore this notify */ - - return_ACPI_STATUS(AE_OK) - } - } -#endif /* * Dispatch the notify to the appropriate handler diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 0338f513a01..7f2e051ed4f 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -765,7 +765,7 @@ static void acpi_bus_set_run_wake_flags(struct acpi_device *device) } status = acpi_get_gpe_status(NULL, device->wakeup.gpe_number, - ACPI_NOT_ISR, &event_status); + &event_status); if (status == AE_OK) device->wakeup.flags.run_wake = !!(event_status & ACPI_EVENT_FLAG_HANDLE); diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 4aaf2497613..e35525b39f6 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -303,8 +303,7 @@ static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle) "Invalid GPE 0x%x\n", index)); goto end; } - result = acpi_get_gpe_status(*handle, index, - ACPI_NOT_ISR, status); + result = acpi_get_gpe_status(*handle, index, status); } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS)) result = acpi_get_event_status(index - num_gpes, status); @@ -395,7 +394,7 @@ static ssize_t counter_set(struct kobject *kobj, result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE); else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) - result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR); + result = acpi_clear_gpe(handle, index); else all_counters[index].count = strtoul(buf, NULL, 0); } else if (index < num_gpes + ACPI_NUM_FIXED_EVENTS) { diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 5b2e5e80ecb..5958d7845bd 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -87,7 +87,7 @@ #define AE_NO_GLOBAL_LOCK (acpi_status) (0x0017 | AE_CODE_ENVIRONMENTAL) #define AE_ABORT_METHOD (acpi_status) (0x0018 | AE_CODE_ENVIRONMENTAL) #define AE_SAME_HANDLER (acpi_status) (0x0019 | AE_CODE_ENVIRONMENTAL) -#define AE_WAKE_ONLY_GPE (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL) +#define AE_NO_HANDLER (acpi_status) (0x001A | AE_CODE_ENVIRONMENTAL) #define AE_OWNER_ID_LIMIT (acpi_status) (0x001B | AE_CODE_ENVIRONMENTAL) #define AE_CODE_ENV_MAX 0x001B diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index fd815f60542..be16f976c53 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -285,16 +285,17 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); */ acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action); -acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type); +acpi_status +acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type); -acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 type); +acpi_status +acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type); -acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); +acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number); acpi_status acpi_get_gpe_status(acpi_handle gpe_device, - u32 gpe_number, - u32 flags, acpi_event_status * event_status); + u32 gpe_number, acpi_event_status *event_status); acpi_status acpi_disable_all_gpes(void); diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 3f08e64962f..de5e99a9953 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -663,44 +663,42 @@ typedef u32 acpi_event_status; #define ACPI_GPE_MAX 0xFF #define ACPI_NUM_GPE 256 +/* Actions for acpi_set_gpe */ + #define ACPI_GPE_ENABLE 0 #define ACPI_GPE_DISABLE 1 +/* gpe_types for acpi_enable_gpe and acpi_disable_gpe */ + +#define ACPI_GPE_TYPE_WAKE (u8) 0x01 +#define ACPI_GPE_TYPE_RUNTIME (u8) 0x02 +#define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x03 + /* * GPE info flags - Per GPE - * +-+-+-+---+-+-+-+ - * |7|6|5|4:3|2|1|0| - * +-+-+-+---+-+-+-+ - * | | | | | | | - * | | | | | | +--- Interrupt type: Edge or Level Triggered - * | | | | | +--- GPE can wake the system - * | | | | +--- Unused - * | | | +--- Type of dispatch -- to method, handler, or none - * | | +--- Unused - * | +--- Unused - * +--- Unused + * +-------+---+-+-+ + * | 7:4 |3:2|1|0| + * +-------+---+-+-+ + * | | | | + * | | | +--- Interrupt type: edge or level triggered + * | | +----- GPE can wake the system + * | +-------- Type of dispatch:to method, handler, or none + * +-------------- <Reserved> */ #define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01 #define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01 #define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00 -#define ACPI_GPE_TYPE_MASK (u8) 0x06 -#define ACPI_GPE_TYPE_WAKE_RUN (u8) 0x06 -#define ACPI_GPE_TYPE_WAKE (u8) 0x02 -#define ACPI_GPE_TYPE_RUNTIME (u8) 0x04 /* Default */ #define ACPI_GPE_CAN_WAKE (u8) 0x02 -#define ACPI_GPE_DISPATCH_MASK (u8) 0x18 -#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x08 -#define ACPI_GPE_DISPATCH_METHOD (u8) 0x10 -#define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 /* Default */ +#define ACPI_GPE_DISPATCH_MASK (u8) 0x0C +#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x04 +#define ACPI_GPE_DISPATCH_METHOD (u8) 0x08 +#define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00 /* * Flags for GPE and Lock interfaces */ -#define ACPI_EVENT_WAKE_ENABLE 0x2 /* acpi_gpe_enable */ -#define ACPI_EVENT_WAKE_DISABLE 0x2 /* acpi_gpe_disable */ - #define ACPI_NOT_ISR 0x1 #define ACPI_ISR 0x0 |