aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/ata/acard-ahci.c2
-rw-r--r--drivers/ata/libata-core.c10
-rw-r--r--drivers/ata/libata-eh.c2
-rw-r--r--drivers/ata/libata-pmp.c10
-rw-r--r--drivers/ata/libata-scsi.c2
-rw-r--r--drivers/ata/libata-sff.c9
-rw-r--r--drivers/ata/pata_at91.c297
-rw-r--r--drivers/ata/pata_cmd64x.c42
-rw-r--r--drivers/ata/pata_triflex.c23
-rw-r--r--include/linux/libata.h1
-rw-r--r--include/linux/pci_ids.h2
11 files changed, 289 insertions, 111 deletions
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 339c210f03a..ae22be4157b 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -417,7 +417,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
VPRINTK("ENTER\n");
- WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+ WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS);
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 76c3c15cb1e..736bee5dafe 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3619,8 +3619,14 @@ int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
scontrol |= (0x2 << 8);
break;
case ATA_LPM_MIN_POWER:
- /* no restrictions on LPM transitions */
- scontrol &= ~(0x3 << 8);
+ if (ata_link_nr_enabled(link) > 0)
+ /* no restrictions on LPM transitions */
+ scontrol &= ~(0x3 << 8);
+ else {
+ /* empty port, power off */
+ scontrol &= ~0xf;
+ scontrol |= (0x1 << 2);
+ }
break;
default:
WARN_ON(1);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index dad9fd660f3..dfb6e9d3d75 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3423,7 +3423,7 @@ fail:
return rc;
}
-static int ata_link_nr_enabled(struct ata_link *link)
+int ata_link_nr_enabled(struct ata_link *link)
{
struct ata_device *dev;
int cnt = 0;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 3120596d4af..f06b7ea590d 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -449,6 +449,16 @@ static void sata_pmp_quirks(struct ata_port *ap)
* otherwise. Don't try hard to recover it.
*/
ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
+ } else if (vendor == 0x197b && devid == 0x2352) {
+ /* chip found in Thermaltake BlackX Duet, jmicron JMB350? */
+ ata_for_each_link(link, ap, EDGE) {
+ /* SRST breaks detection and disks get misclassified
+ * LPM disabled to avoid potential problems
+ */
+ link->flags |= ATA_LFLAG_NO_LPM |
+ ATA_LFLAG_NO_SRST |
+ ATA_LFLAG_ASSUME_ATA;
+ }
}
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index e2f57e9e12f..30ea95f43e7 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2138,7 +2138,7 @@ static unsigned int ata_scsiop_inq_b0(struct ata_scsi_args *args, u8 *rbuf)
* with the unmap bit set.
*/
if (ata_id_has_trim(args->id)) {
- put_unaligned_be32(65535 * 512 / 8, &rbuf[20]);
+ put_unaligned_be64(65535 * 512 / 8, &rbuf[36]);
put_unaligned_be32(1, &rbuf[28]);
}
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index f8380ce0f4d..b1b926c55a7 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2447,13 +2447,18 @@ int ata_pci_sff_activate_host(struct ata_host *host,
return -ENOMEM;
if (!legacy_mode && pdev->irq) {
+ int i;
+
rc = devm_request_irq(dev, pdev->irq, irq_handler,
IRQF_SHARED, drv_name, host);
if (rc)
goto out;
- ata_port_desc(host->ports[0], "irq %d", pdev->irq);
- ata_port_desc(host->ports[1], "irq %d", pdev->irq);
+ for (i = 0; i < 2; i++) {
+ if (ata_port_is_dummy(host->ports[i]))
+ continue;
+ ata_port_desc(host->ports[i], "irq %d", pdev->irq);
+ }
} else if (legacy_mode) {
if (!ata_port_is_dummy(host->ports[0])) {
rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev),
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index a5fdbdcb0fa..960c7257139 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -3,6 +3,7 @@
* with CompactFlash interface in True IDE mode
*
* Copyright (C) 2009 Matyukevich Sergey
+ * 2011 Igor Plyatov
*
* Based on:
* * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
@@ -31,38 +32,150 @@
#include <mach/board.h>
#include <mach/gpio.h>
+#define DRV_NAME "pata_at91"
+#define DRV_VERSION "0.3"
-#define DRV_NAME "pata_at91"
-#define DRV_VERSION "0.2"
-
-#define CF_IDE_OFFSET 0x00c00000
-#define CF_ALT_IDE_OFFSET 0x00e00000
-#define CF_IDE_RES_SIZE 0x08
-#define NCS_RD_PULSE_LIMIT 0x3f /* maximal value for pulse bitfields */
+#define CF_IDE_OFFSET 0x00c00000
+#define CF_ALT_IDE_OFFSET 0x00e00000
+#define CF_IDE_RES_SIZE 0x08
+#define CS_PULSE_MAXIMUM 319
+#define ER_SMC_CALC 1
+#define ER_SMC_RECALC 2
struct at91_ide_info {
unsigned long mode;
unsigned int cs;
-
struct clk *mck;
-
void __iomem *ide_addr;
void __iomem *alt_addr;
};
-static const struct ata_timing initial_timing = {
- .mode = XFER_PIO_0,
- .setup = 70,
- .act8b = 290,
- .rec8b = 240,
- .cyc8b = 600,
- .active = 165,
- .recover = 150,
- .dmack_hold = 0,
- .cycle = 600,
- .udma = 0
+/**
+ * struct smc_range - range of valid values for SMC register.
+ */
+struct smc_range {
+ int min;
+ int max;
};
+/**
+ * adjust_smc_value - adjust value for one of SMC registers.
+ * @value: adjusted value
+ * @range: array of SMC ranges with valid values
+ * @size: SMC ranges array size
+ *
+ * This returns the difference between input and output value or negative
+ * in case of invalid input value.
+ * If negative returned, then output value = maximal possible from ranges.
+ */
+static int adjust_smc_value(int *value, struct smc_range *range, int size)
+{
+ int maximum = (range + size - 1)->max;
+ int remainder;
+
+ do {
+ if (*value < range->min) {
+ remainder = range->min - *value;
+ *value = range->min; /* nearest valid value */
+ return remainder;
+ } else if ((range->min <= *value) && (*value <= range->max))
+ return 0;
+
+ range++;
+ } while (--size);
+ *value = maximum;
+
+ return -1; /* invalid value */
+}
+
+/**
+ * calc_smc_vals - calculate SMC register values
+ * @dev: ATA device
+ * @setup: SMC_SETUP register value
+ * @pulse: SMC_PULSE register value
+ * @cycle: SMC_CYCLE register value
+ *
+ * This returns negative in case of invalid values for SMC registers:
+ * -ER_SMC_RECALC - recalculation required for SMC values,
+ * -ER_SMC_CALC - calculation failed (invalid input values).
+ *
+ * SMC use special coding scheme, see "Coding and Range of Timing
+ * Parameters" table from AT91SAM9 datasheets.
+ *
+ * SMC_SETUP = 128*setup[5] + setup[4:0]
+ * SMC_PULSE = 256*pulse[6] + pulse[5:0]
+ * SMC_CYCLE = 256*cycle[8:7] + cycle[6:0]
+ */
+static int calc_smc_vals(struct device *dev,
+ int *setup, int *pulse, int *cycle, int *cs_pulse)
+{
+ int ret_val;
+ int err = 0;
+ struct smc_range range_setup[] = { /* SMC_SETUP valid values */
+ {.min = 0, .max = 31}, /* first range */
+ {.min = 128, .max = 159} /* second range */
+ };
+ struct smc_range range_pulse[] = { /* SMC_PULSE valid values */
+ {.min = 0, .max = 63}, /* first range */
+ {.min = 256, .max = 319} /* second range */
+ };
+ struct smc_range range_cycle[] = { /* SMC_CYCLE valid values */
+ {.min = 0, .max = 127}, /* first range */
+ {.min = 256, .max = 383}, /* second range */
+ {.min = 512, .max = 639}, /* third range */
+ {.min = 768, .max = 895} /* fourth range */
+ };
+
+ ret_val = adjust_smc_value(setup, range_setup, ARRAY_SIZE(range_setup));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Setup value\n");
+ else
+ *cycle += ret_val;
+
+ ret_val = adjust_smc_value(pulse, range_pulse, ARRAY_SIZE(range_pulse));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Pulse value\n");
+ else
+ *cycle += ret_val;
+
+ ret_val = adjust_smc_value(cycle, range_cycle, ARRAY_SIZE(range_cycle));
+ if (ret_val < 0)
+ dev_warn(dev, "maximal SMC Cycle value\n");
+
+ *cs_pulse = *cycle;
+ if (*cs_pulse > CS_PULSE_MAXIMUM) {
+ dev_err(dev, "unable to calculate valid SMC settings\n");
+ return -ER_SMC_CALC;
+ }
+
+ ret_val = adjust_smc_value(cs_pulse, range_pulse,
+ ARRAY_SIZE(range_pulse));
+ if (ret_val < 0) {
+ dev_warn(dev, "maximal SMC CS Pulse value\n");
+ } else if (ret_val != 0) {
+ *cycle = *cs_pulse;
+ dev_warn(dev, "SMC Cycle extended\n");
+ err = -ER_SMC_RECALC;
+ }
+
+ return err;
+}
+
+/**
+ * to_smc_format - convert values into SMC format
+ * @setup: SETUP value of SMC Setup Register
+ * @pulse: PULSE value of SMC Pulse Register
+ * @cycle: CYCLE value of SMC Cycle Register
+ * @cs_pulse: NCS_PULSE value of SMC Pulse Register
+ */
+static void to_smc_format(int *setup, int *pulse, int *cycle, int *cs_pulse)
+{
+ *setup = (*setup & 0x1f) | ((*setup & 0x80) >> 2);
+ *pulse = (*pulse & 0x3f) | ((*pulse & 0x100) >> 2);
+ *cycle = (*cycle & 0x7f) | ((*cycle & 0x300) >> 1);
+ *cs_pulse = (*cs_pulse & 0x3f) | ((*cs_pulse & 0x100) >> 2);
+}
+
static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
{
unsigned long mul;
@@ -80,85 +193,77 @@ static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
return (ns * mul + 65536) >> 16; /* rounding */
}
-static void set_smc_mode(struct at91_ide_info *info)
-{
- at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
- return;
-}
-
-static void set_smc_timing(struct device *dev,
+/**
+ * set_smc_timing - SMC timings setup.
+ * @dev: device
+ * @info: AT91 IDE info
+ * @ata: ATA timings
+ *
+ * Its assumed that write timings are same as read timings,
+ * cs_setup = 0 and cs_pulse = cycle.
+ */
+static void set_smc_timing(struct device *dev, struct ata_device *adev,
struct at91_ide_info *info, const struct ata_timing *ata)
{
- unsigned long read_cycle, write_cycle, active, recover;
- unsigned long nrd_setup, nrd_pulse, nrd_recover;
- unsigned long nwe_setup, nwe_pulse;
-
- unsigned long ncs_write_setup, ncs_write_pulse;
- unsigned long ncs_read_setup, ncs_read_pulse;
-
- unsigned long mck_hz;
-
- read_cycle = ata->cyc8b;
- nrd_setup = ata->setup;
- nrd_pulse = ata->act8b;
- nrd_recover = ata->rec8b;
-
+ int ret = 0;
+ int use_iordy;
+ unsigned int t6z; /* data tristate time in ns */
+ unsigned int cycle; /* SMC Cycle width in MCK ticks */
+ unsigned int setup; /* SMC Setup width in MCK ticks */
+ unsigned int pulse; /* CFIOR and CFIOW pulse width in MCK ticks */
+ unsigned int cs_setup = 0;/* CS4 or CS5 setup width in MCK ticks */
+ unsigned int cs_pulse; /* CS4 or CS5 pulse width in MCK ticks*/
+ unsigned int tdf_cycles; /* SMC TDF MCK ticks */
+ unsigned long mck_hz; /* MCK frequency in Hz */
+
+ t6z = (ata->mode < XFER_PIO_5) ? 30 : 20;
mck_hz = clk_get_rate(info->mck);
-
- read_cycle = calc_mck_cycles(read_cycle, mck_hz);
- nrd_setup = calc_mck_cycles(nrd_setup, mck_hz);
- nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz);
- nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
-
- active = nrd_setup + nrd_pulse;
- recover = read_cycle - active;
-
- /* Need at least two cycles recovery */
- if (recover < 2)
- read_cycle = active + 2;
-
- /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
- ncs_read_setup = 1;
- ncs_read_pulse = read_cycle - 2;
- if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) {
- ncs_read_pulse = NCS_RD_PULSE_LIMIT;
- dev_warn(dev, "ncs_read_pulse limited to maximal value %lu\n",
- ncs_read_pulse);
+ cycle = calc_mck_cycles(ata->cyc8b, mck_hz);
+ setup = calc_mck_cycles(ata->setup, mck_hz);
+ pulse = calc_mck_cycles(ata->act8b, mck_hz);
+ tdf_cycles = calc_mck_cycles(t6z, mck_hz);
+
+ do {
+ ret = calc_smc_vals(dev, &setup, &pulse, &cycle, &cs_pulse);
+ } while (ret == -ER_SMC_RECALC);
+
+ if (ret == -ER_SMC_CALC)
+ dev_err(dev, "Interface may not operate correctly\n");
+
+ dev_dbg(dev, "SMC Setup=%u, Pulse=%u, Cycle=%u, CS Pulse=%u\n",
+ setup, pulse, cycle, cs_pulse);
+ to_smc_format(&setup, &pulse, &cycle, &cs_pulse);
+ /* disable or enable waiting for IORDY signal */
+ use_iordy = ata_pio_need_iordy(adev);
+ if (use_iordy)
+ info->mode |= AT91_SMC_EXNWMODE_READY;
+
+ if (tdf_cycles > 15) {
+ tdf_cycles = 15;
+ dev_warn(dev, "maximal SMC TDF Cycles value\n");
}
- /* Write timings same as read timings */
- write_cycle = read_cycle;
- nwe_setup = nrd_setup;
- nwe_pulse = nrd_pulse;
- ncs_write_setup = ncs_read_setup;
- ncs_write_pulse = ncs_read_pulse;
-
- dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
- nrd_setup, nrd_pulse, read_cycle);
- dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
- nwe_setup, nwe_pulse, write_cycle);
- dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
- ncs_read_setup, ncs_read_pulse);
- dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
- ncs_write_setup, ncs_write_pulse);
+ dev_dbg(dev, "Use IORDY=%u, TDF Cycles=%u\n", use_iordy, tdf_cycles);
+ info->mode |= AT91_SMC_TDF_(tdf_cycles);
+ /* write SMC Setup Register */
at91_sys_write(AT91_SMC_SETUP(info->cs),
- AT91_SMC_NWESETUP_(nwe_setup) |
- AT91_SMC_NRDSETUP_(nrd_setup) |
- AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
- AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
-
+ AT91_SMC_NWESETUP_(setup) |
+ AT91_SMC_NRDSETUP_(setup) |
+ AT91_SMC_NCS_WRSETUP_(cs_setup) |
+ AT91_SMC_NCS_RDSETUP_(cs_setup));
+ /* write SMC Pulse Register */
at91_sys_write(AT91_SMC_PULSE(info->cs),
- AT91_SMC_NWEPULSE_(nwe_pulse) |
- AT91_SMC_NRDPULSE_(nrd_pulse) |
- AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
- AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
-
+ AT91_SMC_NWEPULSE_(pulse) |
+ AT91_SMC_NRDPULSE_(pulse) |
+ AT91_SMC_NCS_WRPULSE_(cs_pulse) |
+ AT91_SMC_NCS_RDPULSE_(cs_pulse));
+ /* write SMC Cycle Register */
at91_sys_write(AT91_SMC_CYCLE(info->cs),
- AT91_SMC_NWECYCLE_(write_cycle) |
- AT91_SMC_NRDCYCLE_(read_cycle));
-
- return;
+ AT91_SMC_NWECYCLE_(cycle) |
+ AT91_SMC_NRDCYCLE_(cycle));
+ /* write SMC Mode Register*/
+ at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
}
static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -172,15 +277,9 @@ static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
if (ret) {
dev_warn(ap->dev, "Failed to compute ATA timing %d, "
"set PIO_0 timing\n", ret);
- set_smc_timing(ap->dev, info, &initial_timing);
- } else {
- set_smc_timing(ap->dev, info, &timing);
+ timing = *ata_timing_find_mode(XFER_PIO_0);
}
-
- /* Setup SMC mode */
- set_smc_mode(info);
-
- return;
+ set_smc_timing(ap->dev, adev, info, &timing);
}
static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
@@ -346,7 +445,7 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
static struct platform_driver pata_at91_driver = {
.probe = pata_at91_probe,
.remove = __devexit_p(pata_at91_remove),
- .driver = {
+ .driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 905ff76d3cb..7bafc16cf5e 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -41,6 +41,9 @@
enum {
CFR = 0x50,
CFR_INTR_CH0 = 0x04,
+ CNTRL = 0x51,
+ CNTRL_CH0 = 0x04,
+ CNTRL_CH1 = 0x08,
CMDTIM = 0x52,
ARTTIM0 = 0x53,
DRWTIM0 = 0x54,
@@ -328,9 +331,19 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &cmd648_port_ops
}
};
- const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
- u8 mrdmode;
+ const struct ata_port_info *ppi[] = {
+ &cmd_info[id->driver_data],
+ &cmd_info[id->driver_data],
+ NULL
+ };
+ u8 mrdmode, reg;
int rc;
+ struct pci_dev *bridge = pdev->bus->self;
+ /* mobility split bridges don't report enabled ports correctly */
+ int port_ok = !(bridge && bridge->vendor ==
+ PCI_VENDOR_ID_MOBILITY_ELECTRONICS);
+ /* all (with exceptions below) apart from 643 have CNTRL_CH0 bit */
+ int cntrl_ch0_ok = (id->driver_data != 0);
rc = pcim_enable_device(pdev);
if (rc)
@@ -341,11 +354,18 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
- if (pdev->revision > 4)
+ if (pdev->revision > 4) {
ppi[0] = &cmd_info[2];
+ ppi[1] = &cmd_info[2];
+ }
/* Early rev with other problems ? */
- else if (pdev->revision == 1)
+ else if (pdev->revision == 1) {
ppi[0] = &cmd_info[3];
+ ppi[1] = &cmd_info[3];
+ }
+ /* revs 1,2 have no CNTRL_CH0 */
+ if (pdev->revision < 3)
+ cntrl_ch0_ok = 0;
}
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
@@ -354,6 +374,20 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
mrdmode |= 0x02; /* Memory read line enable */
pci_write_config_byte(pdev, MRDMODE, mrdmode);
+ /* check for enabled ports */
+ pci_read_config_byte(pdev, CNTRL, &reg);
+ if (!port_ok)
+ dev_printk(KERN_NOTICE, &pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
+ if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Primary port is disabled\n");
+ ppi[0] = &ata_dummy_port_info;
+
+ }
+ if (port_ok && !(reg & CNTRL_CH1)) {
+ dev_printk(KERN_NOTICE, &pdev->dev, "Secondary port is disabled\n");
+ ppi[1] = &ata_dummy_port_info;
+ }
+
/* Force PIO 0 here.. */
/* PPC specific fixup copied from old driver */
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 03b6d69d619..b3e0c943228 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -210,13 +210,34 @@ static const struct pci_device_id triflex[] = {
{ },
};
+#ifdef CONFIG_PM
+static int triflex_ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc = 0;
+
+ rc = ata_host_suspend(host, mesg);
+ if (rc)
+ return rc;
+
+ /*
+ * We must not disable or powerdown the device.
+ * APM bios refuses to suspend if IDE is not accessible.
+ */
+ pci_save_state(pdev);
+
+ return 0;
+}
+
+#endif
+
static struct pci_driver triflex_pci_driver = {
.name = DRV_NAME,
.id_table = triflex,
.probe = triflex_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
- .suspend = ata_pci_device_suspend,
+ .suspend = triflex_ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 04f32a3eb26..5a9926b3407 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1151,6 +1151,7 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset);
extern void ata_std_error_handler(struct ata_port *ap);
+extern int ata_link_nr_enabled(struct ata_link *link);
/*
* Base operations to inherit from and initializers for sht
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 8abe8d78c4b..8652a4fa3fe 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -608,6 +608,8 @@
#define PCI_DEVICE_ID_MATROX_G550 0x2527
#define PCI_DEVICE_ID_MATROX_VIA 0x4536
+#define PCI_VENDOR_ID_MOBILITY_ELECTRONICS 0x14f2
+
#define PCI_VENDOR_ID_CT 0x102c
#define PCI_DEVICE_ID_CT_69000 0x00c0
#define PCI_DEVICE_ID_CT_65545 0x00d8
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-28 11:11:50 +0000