diff options
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 7 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 1277 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 319 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.h | 10 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 2 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 590 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.h | 16 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 766 |
8 files changed, 2928 insertions, 59 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 51dba1c78e1..623737fb719 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1046,9 +1046,9 @@ out: * * Determines physical layer capabilities of the current configuration. **/ -static s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) +static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) { - s32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; switch (hw->device_id) { case IXGBE_DEV_ID_82598: @@ -1111,8 +1111,11 @@ static struct ixgbe_mac_operations mac_ops_82598 = { .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, .get_media_type = &ixgbe_get_media_type_82598, .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598, + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, .get_mac_addr = &ixgbe_get_mac_addr_generic, .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, .read_analog_reg8 = &ixgbe_read_analog_reg8_82598, .write_analog_reg8 = &ixgbe_write_analog_reg8_82598, .setup_link = &ixgbe_setup_mac_link_82598, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c new file mode 100644 index 00000000000..cc3bfa195b7 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -0,0 +1,1277 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" + +#define IXGBE_82599_MAX_TX_QUEUES 128 +#define IXGBE_82599_MAX_RX_QUEUES 128 +#define IXGBE_82599_RAR_ENTRIES 128 +#define IXGBE_82599_MC_TBL_SIZE 128 +#define IXGBE_82599_VFT_TBL_SIZE 128 + +s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw); +s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete); +s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw); +static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw); +s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, + u32 vind, bool vlan_on); +s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw); +s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw); +s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); +s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_start_hw_rev_0_82599(struct ixgbe_hw *hw); +s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw); +u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw); + +void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = + &ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.setup_link_speed = + &ixgbe_setup_mac_link_speed_multispeed_fiber; + } else { + mac->ops.setup_link = + &ixgbe_setup_mac_link_82599; + mac->ops.setup_link_speed = + &ixgbe_setup_mac_link_speed_82599; + } +} + +s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u16 list_offset, data_offset, data_value; + + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { + ixgbe_init_mac_link_ops_82599(hw); + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + + if (ret_val != 0) + goto setup_sfp_out; + + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + while (data_value != 0xffff) { + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); + IXGBE_WRITE_FLUSH(hw); + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + } + /* Now restart DSP */ + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102); + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d); + IXGBE_WRITE_FLUSH(hw); + } + +setup_sfp_out: + return ret_val; +} + +/** + * ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u16 msix_count; + pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS, + &msix_count); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW, so increment to give proper value */ + msix_count++; + + return msix_count; +} + +static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val; + + /* Set the bus information prior to PHY identification */ + mac->ops.get_bus_info(hw); + + /* Call PHY identify routine to get the Cu or SFI phy type */ + ret_val = phy->ops.identify(hw); + + if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto get_invariants_out; + + ixgbe_init_mac_link_ops_82599(hw); + + /* Setup SFP module if there is one present. */ + ret_val = mac->ops.setup_sfp(hw); + + /* If copper media, overwrite with copper function pointers */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82599; + mac->ops.setup_link_speed = + &ixgbe_setup_copper_link_speed_82599; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_82599; + } + + /* PHY Init */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + default: + break; + } + + mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; + mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw); + +get_invariants_out: + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @negotiation: true when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *negotiation) +{ + s32 status = 0; + + switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_10G_SERIAL: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: + *speed = IXGBE_LINK_SPEED_100_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_SGMII_1G_100M: + *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; + *negotiation = false; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + goto out; + break; + } + + if (hw->phy.multispeed_fiber) { + *speed |= IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + } + +out: + return status; +} + +/** + * ixgbe_get_copper_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + **/ +static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = IXGBE_ERR_LINK_SETUP; + u16 speed_ability; + + *speed = 0; + *autoneg = true; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &speed_ability); + + if (status == 0) { + if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + } + + return status; +} + +/** + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + if (hw->phy.type == ixgbe_phy_cu_unknown || + hw->phy.type == ixgbe_phy_tn) { + media_type = ixgbe_media_type_copper; + goto out; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599: + case IXGBE_DEV_ID_82599_KX4: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82599_SFP: + media_type = ixgbe_media_type_fiber; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_setup_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (hw->phy.autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not complete.\n"); + } + } + } + + /* Set up flow control */ + status = ixgbe_setup_fc_generic(hw, 0); + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Setup MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link for multi-speed fiber at 1G speed, if link + * fails at 10G. + * Performs autonegotiation if needed. + **/ +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_82599_AUTONEG; + status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, + link_speed, + true, true); + return status; +} + +/** + * ixgbe_setup_mac_link_speed_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed phy_link_speed; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + u32 speedcnt = 0; + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + bool link_up = false; + bool negotiation; + + /* Mask off requested but non-supported speeds */ + hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation); + speed &= phy_link_speed; + + /* + * Try each speed one by one, highest priority first. We do this in + * software because 10gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* Set hardware SDP's */ + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + + ixgbe_setup_mac_link_speed_82599(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg, + autoneg_wait_to_complete); + + msleep(50); + + /* If we have link, just jump out */ + hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false); + if (link_up) + goto out; + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* Set hardware SDP's */ + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + + ixgbe_setup_mac_link_speed_82599( + hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg, + autoneg_wait_to_complete); + + msleep(50); + + /* If we have link, just jump out */ + hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false); + if (link_up) + goto out; + } + + /* + * We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, + highest_link_speed, + autoneg, + autoneg_wait_to_complete); + +out: + return status; +} + +/** + * ixgbe_check_mac_link_82599 - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete) +{ + u32 links_reg; + u32 i; + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_10G_82599) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_1G_82599) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + else + *speed = IXGBE_LINK_SPEED_100_FULL; + + + return 0; +} + +/** + * ixgbe_setup_mac_link_speed_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 links_reg; + u32 i; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + + /* Check to see if speed passed in is supported. */ + hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg); + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) { + status = IXGBE_ERR_LINK_SETUP; + } else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + /* Set KX4/KX/KR support according to speed requested */ + autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP) + autoc |= IXGBE_AUTOC_KR_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + /* Switch from 1G SFI to 10G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; + } + } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + /* Switch from 10G SFI to 1G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + if (autoneg) + autoc |= IXGBE_AUTOC_LMS_1G_AN; + else + autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + } + } + + if (status == 0) { + /* Restart link */ + autoc |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /*Just in case Autoneg time=0*/ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = + IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not " + "complete.\n"); + } + } + } + + /* Set up flow control */ + status = ixgbe_setup_fc_generic(hw, 0); + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + } + + return status; +} + +/** + * ixgbe_setup_copper_link_82599 - Setup copper link settings + * @hw: pointer to hardware structure + * + * Restarts the link on PHY and then MAC. Performs autonegotiation if needed. + **/ +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw) +{ + s32 status; + + /* Restart autonegotiation on PHY */ + status = hw->phy.ops.setup_link(hw); + + /* Set up MAC */ + ixgbe_setup_mac_link_82599(hw); + + return status; +} + +/** + * ixgbe_setup_copper_link_speed_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Restarts link on PHY and MAC based on settings passed in. + **/ +static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_setup_mac_link_82599(hw); + + return status; +} + +/** + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 ctrl, ctrl_ext; + u32 i; + u32 autoc; + u32 autoc2; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + hw->mac.ops.stop_adapter(hw); + + /* Reset PHY */ + hw->phy.ops.reset(hw); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests before reset + */ + if (ixgbe_disable_pcie_master(hw) != 0) { + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + } + + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + /* Clear PF Reset Done bit so PF/VF Mail Ops can work */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + + msleep(50); + + + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = true; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + return status; +} + +/** + * ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar + **/ +s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar_lo, mpsar_hi; + u32 rar_entries = hw->mac.num_rar_entries; + + if (rar < rar_entries) { + mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + + if (!mpsar_lo && !mpsar_hi) + goto done; + + if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { + if (mpsar_lo) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); + mpsar_lo = 0; + } + if (mpsar_hi) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); + mpsar_hi = 0; + } + } else if (vmdq < 32) { + mpsar_lo &= ~(1 << vmdq); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); + } else { + mpsar_hi &= ~(1 << (vmdq - 32)); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); + } + + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + hw->mac.ops.clear_rar(hw, rar); + } else { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + } + +done: + return 0; +} + +/** + * ixgbe_set_vmdq_82599 - Associate a VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq pool index + **/ +s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar; + u32 rar_entries = hw->mac.num_rar_entries; + + if (rar < rar_entries) { + if (vmdq < 32) { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar |= 1 << vmdq; + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); + } else { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + mpsar |= 1 << (vmdq - 32); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); + } + } else { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + } + return 0; +} + +/** + * ixgbe_set_vfta_82599 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFVFB + * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + u32 regindex; + u32 bitindex; + u32 bits; + u32 first_empty_slot; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* + * this is a 2 part operation - first the VFTA, then the + * VLVF and VLVFB if vind is set + */ + + /* Part 1 + * The VFTA is a bitstring made up of 128 32-bit registers + * that enable the particular VLAN id, much like the MTA: + * bits[11-5]: which register + * bits[4-0]: which bit in the register + */ + regindex = (vlan >> 5) & 0x7F; + bitindex = vlan & 0x1F; + bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + if (vlan_on) + bits |= (1 << bitindex); + else + bits &= ~(1 << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); + + + /* Part 2 + * If the vind is set + * Either vlan_on + * make sure the vlan is in VLVF + * set the vind bit in the matching VLVFB + * Or !vlan_on + * clear the pool bit and possibly the vind + */ + if (vind) { + /* find the vlanid or the first empty slot */ + first_empty_slot = 0; + + for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); + if (!bits && !first_empty_slot) + first_empty_slot = regindex; + else if ((bits & 0x0FFF) == vlan) + break; + } + + if (regindex >= IXGBE_VLVF_ENTRIES) { + if (first_empty_slot) + regindex = first_empty_slot; + else { + hw_dbg(hw, "No space in VLVF.\n"); + goto out; + } + } + + if (vlan_on) { + /* set the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(regindex * 2)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(regindex * 2), bits); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1), bits); + } + } else { + /* clear the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(regindex * 2)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(regindex * 2), bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1)); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((regindex * 2) + 1), bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB(regindex * 2)); + } + } + + if (bits) + IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), + (IXGBE_VLVF_VIEN | vlan)); + else + IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), 0); + } + +out: + return 0; +} + +/** + * ixgbe_clear_vfta_82599 - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0); + } + + return 0; +} + +/** + * ixgbe_blink_led_start_82599 - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + **/ +s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_82599 - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + **/ +s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg &= ~IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array |