aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-omap2/clock.c156
-rw-r--r--arch/arm/mach-omap2/clock.h6
-rw-r--r--arch/arm/mach-omap2/prcm.c43
-rw-r--r--arch/arm/plat-omap/include/mach/clock.h2
-rw-r--r--arch/arm/plat-omap/include/mach/prcm.h1
5 files changed, 131 insertions, 77 deletions
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b0665f161c0..456e2ad5f62 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -27,6 +27,7 @@
#include <mach/clock.h>
#include <mach/clockdomain.h>
#include <mach/cpu.h>
+#include <mach/prcm.h>
#include <asm/div64.h>
#include <mach/sdrc.h>
@@ -38,8 +39,6 @@
#include "cm-regbits-24xx.h"
#include "cm-regbits-34xx.h"
-#define MAX_CLOCK_ENABLE_WAIT 100000
-
/* DPLL rate rounding: minimum DPLL multiplier, divider values */
#define DPLL_MIN_MULTIPLIER 1
#define DPLL_MIN_DIVIDER 1
@@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
}
/**
- * omap2_wait_clock_ready - wait for clock to enable
- * @reg: physical address of clock IDLEST register
- * @mask: value to mask against to determine if the clock is active
- * @name: name of the clock (for printk)
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
*
- * Returns 1 if the clock enabled in time, or 0 if it failed to enable
- * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks. For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock. Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active. Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts. No return value.
*/
-int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit)
{
- int i = 0;
- int ena = 0;
+ u32 r;
/*
- * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
- * 34xx reverses this, just to keep us on our toes
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
+ * it's just a matter of XORing the bits.
*/
- if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
- ena = mask;
- else if (cpu_mask & RATE_IN_343X)
- ena = 0;
-
- /* Wait for lock */
- while (((__raw_readl(reg) & mask) != ena) &&
- (i++ < MAX_CLOCK_ENABLE_WAIT)) {
- udelay(1);
- }
-
- if (i <= MAX_CLOCK_ENABLE_WAIT)
- pr_debug("Clock %s stable after %d loops\n", name, i);
- else
- printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
- name, MAX_CLOCK_ENABLE_WAIT);
-
-
- return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
-};
+ r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+ *other_reg = (__force void __iomem *)r;
+ *other_bit = clk->enable_bit;
+}
-/*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock. This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2). This is not true for all modules. No return value.
*/
-static void omap2_clk_wait_ready(struct clk *clk)
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+ u8 *idlest_bit)
{
- void __iomem *reg, *other_reg, *st_reg;
- u32 bit;
+ u32 r;
- /*
- * REVISIT: This code is pretty ugly. It would be nice to generalize
- * it and pull it into struct clk itself somehow.
- */
- reg = clk->enable_reg;
+ r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+ *idlest_reg = (__force void __iomem *)r;
+ *idlest_bit = clk->enable_bit;
+}
- /*
- * Convert CM_ICLKEN* <-> CM_FCLKEN*. This conversion assumes
- * it's just a matter of XORing the bits.
- */
- other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+/**
+ * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE). This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code. No return value.
+ */
+static void omap2_module_wait_ready(struct clk *clk)
+{
+ void __iomem *companion_reg, *idlest_reg;
+ u8 other_bit, idlest_bit;
+
+ /* Not all modules have multiple clocks that their IDLEST depends on */
+ if (clk->ops->find_companion) {
+ clk->ops->find_companion(clk, &companion_reg, &other_bit);
+ if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+ return;
+ }
- /* Check if both functional and interface clocks
- * are running. */
- bit = 1 << clk->enable_bit;
- if (!(__raw_readl(other_reg) & bit))
- return;
- st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+ clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
- omap2_wait_clock_ready(st_reg, bit, clk->name);
+ omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
}
-static int omap2_dflt_clk_enable(struct clk *clk)
+int omap2_dflt_clk_enable(struct clk *clk)
{
u32 v;
if (unlikely(clk->enable_reg == NULL)) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+ pr_err("clock.c: Enable for %s without enable code\n",
clk->name);
return 0; /* REVISIT: -EINVAL */
}
@@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk)
__raw_writel(v, clk->enable_reg);
v = __raw_readl(clk->enable_reg); /* OCP barrier */
- return 0;
-}
+ if (clk->ops->find_idlest)
+ omap2_module_wait_ready(clk);
-static int omap2_dflt_clk_enable_wait(struct clk *clk)
-{
- int ret;
-
- if (!clk->enable_reg) {
- printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
- clk->name);
- return 0; /* REVISIT: -EINVAL */
- }
-
- ret = omap2_dflt_clk_enable(clk);
- if (ret == 0)
- omap2_clk_wait_ready(clk);
- return ret;
+ return 0;
}
-static void omap2_dflt_clk_disable(struct clk *clk)
+void omap2_dflt_clk_disable(struct clk *clk)
{
u32 v;
@@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk)
}
const struct clkops clkops_omap2_dflt_wait = {
- .enable = omap2_dflt_clk_enable_wait,
+ .enable = omap2_dflt_clk_enable,
.disable = omap2_dflt_clk_disable,
+ .find_companion = omap2_clk_dflt_find_companion,
+ .find_idlest = omap2_clk_dflt_find_idlest,
};
const struct clkops clkops_omap2_dflt = {
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 2679ddfa642..9ae7540f8af 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
u32 omap2_get_dpll_rate(struct clk *clk);
int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
void omap2_clk_prepare_for_reboot(void);
+int omap2_dflt_clk_enable(struct clk *clk);
+void omap2_dflt_clk_disable(struct clk *clk);
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+ u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+ u8 *idlest_bit);
extern const struct clkops clkops_omap2_dflt_wait;
extern const struct clkops clkops_omap2_dflt;
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index f945156d558..ced555a4cd1 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/common.h>
#include <mach/prcm.h>
@@ -28,6 +29,8 @@
static void __iomem *prm_base;
static void __iomem *cm_base;
+#define MAX_MODULE_ENABLE_WAIT 100000
+
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
@@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
}
EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
+/**
+ * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
+ * @reg: physical address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the module indicated readiness in time, or 0 if it
+ * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ */
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+{
+ int i = 0;
+ int ena = 0;
+
+ /*
+ * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+ * 34xx reverses this, just to keep us on our toes
+ */
+ if (cpu_is_omap24xx())
+ ena = mask;
+ else if (cpu_is_omap34xx())
+ ena = 0;
+ else
+ BUG();
+
+ /* Wait for lock */
+ while (((__raw_readl(reg) & mask) != ena) &&
+ (i++ < MAX_MODULE_ENABLE_WAIT))
+ udelay(1);
+
+ if (i < MAX_MODULE_ENABLE_WAIT)
+ pr_debug("cm: Module associated with clock %s ready after %d "
+ "loops\n", name, i);
+ else
+ pr_err("cm: Module associated with clock %s didn't enable in "
+ "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+
+ return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
prm_base = omap2_globals->prm;
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
index f9f65e1ba3f..4b8b0d65cbf 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -20,6 +20,8 @@ struct clockdomain;
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
+ void (*find_idlest)(struct clk *, void __iomem **, u8 *);
+ void (*find_companion)(struct clk *, void __iomem **, u8 *);
};
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
index 24ac3c71591..cda2a70397b 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -25,6 +25,7 @@
u32 omap_prcm_get_reset_sources(void);
void omap_prcm_arch_reset(char mode);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
#endif