aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt47
-rw-r--r--arch/arm/boot/dts/dbx5x0.dtsi4
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c3
-rw-r--r--drivers/pinctrl/core.c2
-rw-r--r--drivers/pinctrl/pinctrl-at91.c2
-rw-r--r--drivers/pinctrl/pinctrl-imx53.c2
-rw-r--r--drivers/pinctrl/pinctrl-nomadik.c11
-rw-r--r--drivers/pinctrl/pinctrl-sirf.c48
8 files changed, 113 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
new file mode 100644
index 00000000000..c596a6ad328
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
@@ -0,0 +1,47 @@
+CSR SiRFprimaII pinmux controller
+
+Required properties:
+- compatible : "sirf,prima2-pinctrl"
+- reg : Address range of the pinctrl registers
+- interrupts : Interrupts used by every GPIO group
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller : Marks the device node as an interrupt controller
+Optional properties:
+- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
+- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- sirf,pins : An array of strings. Each string contains the name of a group.
+- sirf,function: A string containing the name of the function to mux to the
+ group.
+
+ Valid values for group and function names can be found from looking at the
+ group and function arrays in driver files:
+ drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ uart2_pins_a: uart2@0 {
+ uart {
+ sirf,pins = "uart2grp";
+ sirf,function = "uart2";
+ };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+ uart {
+ sirf,pins = "uart2_nostreamctrlgrp";
+ sirf,function = "uart2_nostreamctrl";
+ };
+ };
+
+For a specific board, if it wants to use uart2 without hardware flow control,
+it can add the following to its board-specific .dts file.
+uart2: uart@0xb0070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_noflow_pins_a>;
+}
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 2efd9c891bc..63f2fbcfe81 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -170,7 +170,9 @@
gpio-bank = <8>;
};
- pinctrl {
+ pinctrl@80157000 {
+ // This is actually the PRCMU base address
+ reg = <0x80157000 0x2000>;
compatible = "stericsson,nmk_pinctrl";
};
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index db0bb75e2c7..5b286e06474 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -285,7 +285,8 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
/* Requires device name bindings. */
- OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE,
+ "pinctrl-db8500", NULL),
/* Requires clock name and DMA bindings. */
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c
index 5cdee8669ea..59f5a965bdc 100644
--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -700,7 +700,7 @@ static struct pinctrl *create_pinctrl(struct device *dev)
}
}
- /* Add the pinmux to the global list */
+ /* Add the pinctrl handle to the global list */
list_add_tail(&p->node, &pinctrl_list);
return p;
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index c5e75715718..bff54bfaff4 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -265,7 +265,7 @@ static int at91_dt_node_to_map(struct pinctrl_dev *pctldev,
/* create mux map */
parent = of_get_parent(np);
if (!parent) {
- kfree(new_map);
+ devm_kfree(pctldev->dev, new_map);
return -EINVAL;
}
new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
diff --git a/drivers/pinctrl/pinctrl-imx53.c b/drivers/pinctrl/pinctrl-imx53.c
index ec404869177..af571dc3dc6 100644
--- a/drivers/pinctrl/pinctrl-imx53.c
+++ b/drivers/pinctrl/pinctrl-imx53.c
@@ -1371,7 +1371,7 @@ static struct imx_pin_reg imx53_pin_regs[] = {
IMX_PIN_REG(MX53_PAD_GPIO_8, 0x6C8, 0x338, 0, 0x7F8, 1), /* MX53_PAD_GPIO_8__ESAI1_TX5_RX0 */
IMX_PIN_REG(MX53_PAD_GPIO_8, 0x6C8, 0x338, 1, 0x000, 0), /* MX53_PAD_GPIO_8__GPIO1_8 */
IMX_PIN_REG(MX53_PAD_GPIO_8, 0x6C8, 0x338, 2, 0x000, 0), /* MX53_PAD_GPIO_8__EPIT2_EPITO */
- IMX_PIN_REG(MX53_PAD_GPIO_8, 0x6C8, 0x338, 3, 0x760, 3), /* MX53_PAD_GPIO_8__CAN1_RXCAN */
+ IMX_PIN_REG(MX53_PAD_GPIO_8, 0x6C8, 0x338, 3, 0x760, 2), /* MX53_PAD_GPIO_8__CAN1_RXCAN */
IMX_PIN_REG(MX53_PAD_GPIO_8, 0x6C8, 0x338, 4, 0x880, 5), /* MX53_PAD_GPIO_8__UART2_RXD_MUX */
IMX_PIN_REG(MX53_PAD_GPIO_8, 0x6C8, 0x338, 5, 0x000, 0), /* MX53_PAD_GPIO_8__FIRI_TXD */
IMX_PIN_REG(MX53_PAD_GPIO_8, 0x6C8, 0x338, 6, 0x000, 0), /* MX53_PAD_GPIO_8__SPDIF_SRCLK */
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index ef66f98e920..015b093287a 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -259,6 +259,9 @@ static void nmk_prcm_altcx_set_mode(struct nmk_pinctrl *npct,
const struct prcm_gpiocr_altcx_pin_desc *pin_desc;
const u16 *gpiocr_regs;
+ if (!npct->prcm_base)
+ return;
+
if (alt_num > PRCM_IDX_GPIOCR_ALTC_MAX) {
dev_err(npct->dev, "PRCM GPIOCR: alternate-C%i is invalid\n",
alt_num);
@@ -682,6 +685,9 @@ static int nmk_prcm_gpiocr_get_mode(struct pinctrl_dev *pctldev, int gpio)
const struct prcm_gpiocr_altcx_pin_desc *pin_desc;
const u16 *gpiocr_regs;
+ if (!npct->prcm_base)
+ return NMK_GPIO_ALT_C;
+
for (i = 0; i < npct->soc->npins_altcx; i++) {
if (npct->soc->altcx_pins[i].pin == gpio)
break;
@@ -1887,9 +1893,12 @@ static int __devinit nmk_pinctrl_probe(struct platform_device *pdev)
"failed to ioremap PRCM registers\n");
return -ENOMEM;
}
- } else {
+ } else if (version == PINCTRL_NMK_STN8815) {
dev_info(&pdev->dev,
"No PRCM base, assume no ALT-Cx control is available\n");
+ } else {
+ dev_err(&pdev->dev, "missing PRCM base address\n");
+ return -EINVAL;
}
/*
diff --git a/drivers/pinctrl/pinctrl-sirf.c b/drivers/pinctrl/pinctrl-sirf.c
index a4f0c5e487d..30e1a38293a 100644
--- a/drivers/pinctrl/pinctrl-sirf.c
+++ b/drivers/pinctrl/pinctrl-sirf.c
@@ -1663,6 +1663,44 @@ const struct irq_domain_ops sirfsoc_gpio_irq_simple_ops = {
.xlate = irq_domain_xlate_twocell,
};
+static void sirfsoc_gpio_set_pullup(const u32 *pullups)
+{
+ int i, n;
+ const unsigned long *p = (const unsigned long *)pullups;
+
+ for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
+ n = find_first_bit(p + i, BITS_PER_LONG);
+ while (n < BITS_PER_LONG) {
+ u32 offset = SIRFSOC_GPIO_CTRL(i, n);
+ u32 val = readl(sgpio_bank[i].chip.regs + offset);
+ val |= SIRFSOC_GPIO_CTL_PULL_MASK;
+ val |= SIRFSOC_GPIO_CTL_PULL_HIGH;
+ writel(val, sgpio_bank[i].chip.regs + offset);
+
+ n = find_next_bit(p + i, BITS_PER_LONG, n + 1);
+ }
+ }
+}
+
+static void sirfsoc_gpio_set_pulldown(const u32 *pulldowns)
+{
+ int i, n;
+ const unsigned long *p = (const unsigned long *)pulldowns;
+
+ for (i = 0; i < SIRFSOC_GPIO_NO_OF_BANKS; i++) {
+ n = find_first_bit(p + i, BITS_PER_LONG);
+ while (n < BITS_PER_LONG) {
+ u32 offset = SIRFSOC_GPIO_CTRL(i, n);
+ u32 val = readl(sgpio_bank[i].chip.regs + offset);
+ val |= SIRFSOC_GPIO_CTL_PULL_MASK;
+ val &= ~SIRFSOC_GPIO_CTL_PULL_HIGH;
+ writel(val, sgpio_bank[i].chip.regs + offset);
+
+ n = find_next_bit(p + i, BITS_PER_LONG, n + 1);
+ }
+ }
+}
+
static int __devinit sirfsoc_gpio_probe(struct device_node *np)
{
int i, err = 0;
@@ -1671,6 +1709,8 @@ static int __devinit sirfsoc_gpio_probe(struct device_node *np)
struct platform_device *pdev;
bool is_marco = false;
+ u32 pullups[SIRFSOC_GPIO_NO_OF_BANKS], pulldowns[SIRFSOC_GPIO_NO_OF_BANKS];
+
pdev = of_find_device_by_node(np);
if (!pdev)
return -ENODEV;
@@ -1726,6 +1766,14 @@ static int __devinit sirfsoc_gpio_probe(struct device_node *np)
irq_set_handler_data(bank->parent_irq, bank);
}
+ if (!of_property_read_u32_array(np, "sirf,pullups", pullups,
+ SIRFSOC_GPIO_NO_OF_BANKS))
+ sirfsoc_gpio_set_pullup(pullups);
+
+ if (!of_property_read_u32_array(np, "sirf,pulldowns", pulldowns,
+ SIRFSOC_GPIO_NO_OF_BANKS))
+ sirfsoc_gpio_set_pulldown(pulldowns);
+
return 0;
out:
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-25 14:38:24 +0000