diff options
| -rw-r--r-- | drivers/net/e100.c | 2 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_82575.c | 8 | ||||
| -rw-r--r-- | drivers/net/igbvf/ethtool.c | 6 | ||||
| -rw-r--r-- | drivers/net/ixgb/ixgb.h | 3 | ||||
| -rw-r--r-- | drivers/net/ixgb/ixgb_ethtool.c | 46 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82598.c | 1 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 38 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 440 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.h | 8 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 115 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 7 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 10 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 7 | ||||
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_x540.c | 69 |
14 files changed, 559 insertions, 201 deletions
diff --git a/drivers/net/e100.c b/drivers/net/e100.c index c810cda3bf1..29f812dc109 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1512,7 +1512,7 @@ static int e100_phy_init(struct nic *nic) static int e100_hw_init(struct nic *nic) { - int err; + int err = 0; e100_hw_reset(nic); diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 0cd41c49bc1..0f563c8c5ff 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -244,6 +244,14 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) */ size += NVM_WORD_SIZE_BASE_SHIFT; + /* + * Check for invalid size + */ + if ((hw->mac.type == e1000_82576) && (size > 15)) { + printk("igb: The NVM size is not valid, " + "defaulting to 32K.\n"); + size = 15; + } nvm->word_size = 1 << size; if (nvm->word_size == (1 << 15)) nvm->page_size = 128; diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c index 112ae15b2d4..b0b14d63dfb 100644 --- a/drivers/net/igbvf/ethtool.c +++ b/drivers/net/igbvf/ethtool.c @@ -391,11 +391,6 @@ static int igbvf_set_wol(struct net_device *netdev, return -EOPNOTSUPP; } -static int igbvf_phys_id(struct net_device *netdev, u32 data) -{ - return 0; -} - static int igbvf_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { @@ -527,7 +522,6 @@ static const struct ethtool_ops igbvf_ethtool_ops = { .self_test = igbvf_diag_test, .get_sset_count = igbvf_get_sset_count, .get_strings = igbvf_get_strings, - .phys_id = igbvf_phys_id, .get_ethtool_stats = igbvf_get_ethtool_stats, .get_coalesce = igbvf_get_coalesce, .set_coalesce = igbvf_set_coalesce, diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index 8f3df044e81..49e8408f05f 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -157,9 +157,6 @@ struct ixgb_adapter { u16 link_duplex; struct work_struct tx_timeout_task; - struct timer_list blink_timer; - unsigned long led_status; - /* TX */ struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp; unsigned int restart_queue; diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 5f224c387e0..6da890b9534 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -611,45 +611,23 @@ err_setup_rx: return err; } -/* toggle LED 4 times per second = 2 "blinks" per second */ -#define IXGB_ID_INTERVAL (HZ/4) - -/* bit defines for adapter->led_status */ -#define IXGB_LED_ON 0 - -static void -ixgb_led_blink_callback(unsigned long data) -{ - struct ixgb_adapter *adapter = (struct ixgb_adapter *)data; - - if (test_and_change_bit(IXGB_LED_ON, &adapter->led_status)) - ixgb_led_off(&adapter->hw); - else - ixgb_led_on(&adapter->hw); - - mod_timer(&adapter->blink_timer, jiffies + IXGB_ID_INTERVAL); -} - static int -ixgb_phys_id(struct net_device *netdev, u32 data) +ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state) { struct ixgb_adapter *adapter = netdev_priv(netdev); - if (!data) - data = INT_MAX; - - if (!adapter->blink_timer.function) { - init_timer(&adapter->blink_timer); - adapter->blink_timer.function = ixgb_led_blink_callback; - adapter->blink_timer.data = (unsigned long)adapter; - } + switch (state) { + case ETHTOOL_ID_ACTIVE: + return 2; - mod_timer(&adapter->blink_timer, jiffies); + case ETHTOOL_ID_ON: + ixgb_led_on(&adapter->hw); + break; - msleep_interruptible(data * 1000); - del_timer_sync(&adapter->blink_timer); - ixgb_led_off(&adapter->hw); - clear_bit(IXGB_LED_ON, &adapter->led_status); + case ETHTOOL_ID_OFF: + case ETHTOOL_ID_INACTIVE: + ixgb_led_off(&adapter->hw); + } return 0; } @@ -767,7 +745,7 @@ static const struct ethtool_ops ixgb_ethtool_ops = { .set_msglevel = ixgb_set_msglevel, .set_tso = ixgb_set_tso, .get_strings = ixgb_get_strings, - .phys_id = ixgb_phys_id, + .set_phys_id = ixgb_set_phys_id, .get_sset_count = ixgb_get_sset_count, .get_ethtool_stats = ixgb_get_ethtool_stats, .get_flags = ethtool_op_get_flags, diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 7a64f50435c..8179e5060a1 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1281,6 +1281,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = { static struct ixgbe_eeprom_operations eeprom_ops_82598 = { .init_params = &ixgbe_init_eeprom_params_generic, .read = &ixgbe_read_eerd_generic, + .read_buffer = &ixgbe_read_eerd_buffer_generic, .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, .update_checksum = &ixgbe_update_eeprom_checksum_generic, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index d1cda36507f..dba5ca6e35c 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -110,7 +110,6 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, &data_offset); - if (ret_val != 0) goto setup_sfp_out; @@ -130,7 +129,7 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) } /* Release the semaphore */ - ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); /* * Delay obtaining semaphore again to allow FW access, * semaphore_delay is in ms usleep_range needs us. @@ -2065,6 +2064,39 @@ out: } /** + * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using + * fastest available method + * + * @hw: pointer to hardware structure + * @offset: offset of word in EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Retrieves 16 bit word(s) read from EEPROM + **/ +static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val = IXGBE_ERR_CONFIG; + + /* + * If EEPROM is detected and can be addressed using 14 bits, + * use EERD otherwise use bit bang + */ + if ((eeprom->type == ixgbe_eeprom_spi) && + (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)) + ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words, + data); + else + ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, + words, + data); + + return ret_val; +} + +/** * ixgbe_read_eeprom_82599 - Read EEPROM word using * fastest available method * @@ -2140,7 +2172,9 @@ static struct ixgbe_mac_operations mac_ops_82599 = { static struct ixgbe_eeprom_operations eeprom_ops_82599 = { .init_params = &ixgbe_init_eeprom_params_generic, .read = &ixgbe_read_eeprom_82599, + .read_buffer = &ixgbe_read_eeprom_buffer_82599, .write = &ixgbe_write_eeprom_generic, + .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic, .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, .update_checksum = &ixgbe_update_eeprom_checksum_generic, diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index cb2e8e18dd3..c4730cd39b2 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -55,6 +55,12 @@ static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm); static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num); static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset); /** * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx @@ -585,6 +591,8 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) /* Set default semaphore delay to 10ms which is a well * tested value */ eeprom->semaphore_delay = 10; + /* Clear EEPROM page size, it will be initialized as needed */ + eeprom->word_page_size = 0; /* * Check for EEPROM present first. @@ -617,26 +625,78 @@ s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) } /** - * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word to be written to the EEPROM + * @offset: offset within the EEPROM to write + * @words: number of words + * @data: 16 bit word(s) to write to EEPROM * - * If ixgbe_eeprom_update_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. + * Reads 16 bit word(s) from EEPROM through bit-bang method **/ -s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) { - s32 status; - u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; + s32 status = 0; + u16 i, count; hw->eeprom.ops.init_params(hw); - if (offset >= hw->eeprom.word_size) { + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; goto out; } + /* + * The EEPROM page size cannot be queried from the chip. We do lazy + * initialization. It is worth to do that when we write large buffer. + */ + if ((hw->eeprom.word_page_size == 0) && + (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) + ixgbe_detect_eeprom_page_size_generic(hw, offset); + + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @words: number of word(s) + * @data: 16 bit word(s) to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word; + u16 page_size; + u16 i; + u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; + /* Prepare the EEPROM for writing */ status = ixgbe_acquire_eeprom(hw); @@ -648,62 +708,147 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) } if (status == 0) { - ixgbe_standby_eeprom(hw); + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); - /* Send the WRITE ENABLE command (8 bit opcode ) */ - ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI, - IXGBE_EEPROM_OPCODE_BITS); + /* Send the WRITE ENABLE command (8 bit opcode ) */ + ixgbe_shift_out_eeprom_bits(hw, + IXGBE_EEPROM_WREN_OPCODE_SPI, + IXGBE_EEPROM_OPCODE_BITS); - ixgbe_standby_eeprom(hw); + ixgbe_standby_eeprom(hw); - /* - * Some SPI eeproms use the 8th address bit embedded in the - * opcode - */ - if ((hw->eeprom.address_bits == 8) && (offset >= 128)) - write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, write_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + page_size = hw->eeprom.word_page_size; + + /* Send the data in burst via SPI*/ + do { + word = data[i]; + word = (word >> 8) | (word << 8); + ixgbe_shift_out_eeprom_bits(hw, word, 16); + + if (page_size == 0) + break; + + /* do not wrap around page */ + if (((offset + i) & (page_size - 1)) == + (page_size - 1)) + break; + } while (++i < words); + + ixgbe_standby_eeprom(hw); + usleep_range(10000, 20000); + } + /* Done with writing - release the EEPROM */ + ixgbe_release_eeprom(hw); + } - /* Send the Write command (8-bit opcode + addr) */ - ixgbe_shift_out_eeprom_bits(hw, write_opcode, - IXGBE_EEPROM_OPCODE_BITS); - ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2), - hw->eeprom.address_bits); + return status; +} - /* Send the data */ - data = (data >> 8) | (data << 8); - ixgbe_shift_out_eeprom_bits(hw, data, 16); - ixgbe_standby_eeprom(hw); +/** + * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status; - /* Done with writing - release the EEPROM */ - ixgbe_release_eeprom(hw); + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; } + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); + out: return status; } /** - * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang + * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang * @hw: pointer to hardware structure * @offset: offset within the EEPROM to be read - * @data: read 16 bit value from EEPROM + * @words: number of word(s) + * @data: read 16 bit words(s) from EEPROM * - * Reads 16 bit value from EEPROM through bit-bang method + * Reads 16 bit word(s) from EEPROM through bit-bang method **/ -s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 *data) +s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) { - s32 status; - u16 word_in; - u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; + s32 status = 0; + u16 i, count; hw->eeprom.ops.init_params(hw); - if (offset >= hw->eeprom.word_size) { + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; goto out; } + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @words: number of word(s) + * @data: read 16 bit word(s) from EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word_in; + u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; + u16 i; + /* Prepare the EEPROM for reading */ status = ixgbe_acquire_eeprom(hw); @@ -715,104 +860,208 @@ s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, } if (status == 0) { - ixgbe_standby_eeprom(hw); + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, read_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + /* Read the data. */ + word_in = ixgbe_shift_in_eeprom_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } - /* - * Some SPI eeproms use the 8th address bit embedded in the - * opcode - */ - if ((hw->eeprom.address_bits == 8) && (offset >= 128)) - read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + /* End this read operation */ + ixgbe_release_eeprom(hw); + } - /* Send the READ command (opcode + addr) */ - ixgbe_shift_out_eeprom_bits(hw, read_opcode, - IXGBE_EEPROM_OPCODE_BITS); - ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2), - hw->eeprom.address_bits); + return status; +} - /* Read the data. */ - word_in = ixgbe_shift_in_eeprom_bits(hw, 16); - *data = (word_in >> 8) | (word_in << 8); +/** + * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit value from EEPROM + * + * Reads 16 bit value from EEPROM through bit-bang method + **/ +s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 *data) +{ + s32 status; - /* End this read operation */ - ixgbe_release_eeprom(hw); + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; } + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + out: return status; } /** - * ixgbe_read_eerd_generic - Read EEPROM word using EERD + * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM + * @offset: offset of word in the EEPROM to read + * @words: number of word(s) + * @data: 16 bit word(s) from the EEPROM * - * Reads a 16 bit word from the EEPROM using the EERD register. + * Reads a 16 bit word(s) from the EEPROM using the EERD register. **/ -s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) { u32 eerd; - s32 status; + s32 status = 0; + u32 i; hw->eeprom.ops.init_params(hw); + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + if (offset >= hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; goto out; } - eerd = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) + - IXGBE_EEPROM_RW_REG_START; + for (i = 0; i < words; i++) { + eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + + IXGBE_EEPROM_RW_REG_START; - IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); + IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); - if (status == 0) - *data = (IXGBE_READ_REG(hw, IXGBE_EERD) >> - IXGBE_EEPROM_RW_REG_DATA); - else - hw_dbg(hw, "Eeprom read timed out\n"); + if (status == 0) { + data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> + IXGBE_EEPROM_RW_REG_DATA); + } else { + hw_dbg(hw, "Eeprom read timed out\n"); + goto out; + } + } +out: + return status; +} +/** + * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be used as a scratch pad + * + * Discover EEPROM page size by writing marching data at given offset. + * This function is called only when we are writing a new large buffer + * at given offset so the data would be overwritten anyway. + **/ +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset) +{ + u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; + s32 status = 0; + u16 i; + + for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) + data[i] = i; + + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, + IXGBE_EEPROM_PAGE_SIZE_MAX, data); + hw->eeprom.word_page_size = 0; + if (status != 0) + goto out; + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + if (status != 0) + goto out; + + /* + * When writing in burst more than the actual page size + * EEPROM address wraps around current page. + */ + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; + + hw_dbg(hw, "Detected EEPROM page size = %d words.", + hw->eeprom.word_page_size); out: return status; } /** - * ixgbe_write_eewr_generic - Write EEPROM word using EEWR + * ixgbe_read_eerd_generic - Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); +} + +/** + * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR * @hw: pointer to hardware structure * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM + * @words: number of words + * @data: word(s) write to the EEPROM * - * Write a 16 bit word to the EEPROM using the EEWR register. + * Write a 16 bit word(s) to the EEPROM using the EEWR register. **/ -s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) { u32 eewr; - s32 status; + s32 status = 0; + u16 i; hw->eeprom.ops.init_params(hw); + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + if (offset >= hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; goto out; } - eewr = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) | - (data << IXGBE_EEPROM_RW_REG_DATA) | IXGBE_EEPROM_RW_REG_START; + for (i = 0; i < words; i++) { + eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | + (data[i] << IXGBE_EEPROM_RW_REG_DATA) | + IXGBE_EEPROM_RW_REG_START; - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); - if (status != 0) { - hw_dbg(hw, "Eeprom write EEWR timed out\n"); - goto out; - } + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } - IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); + IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); - if (status != 0) { - hw_dbg(hw, "Eeprom write EEWR timed out\n"); - goto out; + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } } out: @@ -820,6 +1069,19 @@ out: } /** + * ixgbe_write_eewr_generic - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); +} + +/** * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status * @hw: pointer to hardware structure * @ee_reg: EEPROM flag for polling diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h index e850adbb32a..46be83cfb50 100644 --- a/drivers/net/ixgbe/ixgbe_common.h +++ b/drivers/net/ixgbe/ixgbe_common.h @@ -49,10 +49,18 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index); s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw); s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data); +s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); +s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data); +s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); +s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw); s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, u16 *checksum_val); diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index bcba057b510..f2efa324535 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -847,11 +847,8 @@ static int ixgbe_get_eeprom(struct net_device *netdev, if (!eeprom_buff) return -ENOMEM; - for (i = 0; i < eeprom_len; i++) { - if ((ret_val = hw->eeprom.ops.read(hw, first_word + i, - &eeprom_buff[i]))) - break; - } + ret_val = hw->eeprom.ops.read_buffer(hw, first_word, eeprom_len, + eeprom_buff); /* Device's eeprom is always little-endian, word addressable */ for (i = 0; i < eeprom_len; i++) @@ -1236,46 +1233,62 @@ static const struct ixgbe_reg_test reg_test_82598[] = { { 0, 0, 0, 0 } }; -static const u32 register_test_patterns[] = { - 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF -}; - -#define REG_PATTERN_TEST(R, M, W) \ -{ \ - u32 pat, val, before; \ - for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \ - before = readl(adapter->hw.hw_addr + R); \ - writel((register_test_patterns[pat] & W), \ - (adapter->hw.hw_addr + R)); \ - val = readl(adapter->hw.hw_addr + R); \ - if (val != (register_test_patterns[pat] & W & M)) { \ - e_err(drv, "pattern test reg %04X failed: got " \ - "0x%08X expected 0x%08X\n", \ - R, val, (register_test_patterns[pat] & W & M)); \ - *data = R; \ - writel(before, adapter->hw.hw_addr + R); \ - return 1; \ - } \ - writel(before, adapter->hw.hw_addr + R); \ - } \ +static bool reg_pattern_test(struct ixgbe_adapter *adapter, u64 *data, int reg, + u32 mask, u32 write) +{ + u32 pat, val, before; + static const u32 test_pattern[] = { + 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; + + for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) { + before = readl(adapter->hw.hw_addr + reg); + writel((test_pattern[pat] & write), + (adapter->hw.hw_addr + reg)); + val = readl(adapter->hw.hw_addr + reg); + if (val != (test_pattern[pat] & write & mask)) { + e_err(drv, "pattern test reg %04X failed: got " + "0x%08X expected 0x%08X\n", + reg, val, (test_pattern[pat] & write & mask)); + *data = reg; + writel(before, adapter->hw.hw_addr + reg); + return 1; + } + writel(before, adapter->hw.hw_addr + reg); + } + return 0; } -#define REG_SET_AND_CHECK(R, M, W) \ -{ \ - u32 val, before; \ - before = readl(adapter->hw.hw_addr + R); \ - writel((W & M), (adapter->hw.hw_addr + R)); \ - val = readl(adapter->hw.hw_addr + R); \ - if ((W & M) != (val & M)) { \ - e_err(drv, "set/check reg %04X test failed: got 0x%08X " \ - "expected 0x%08X\n", R, (val & M), (W & M)); \ - *data = R; \ - writel(before, (adapter->hw.hw_addr + R)); \ - return 1; \ - } \ - writel(before, (adapter->hw.hw_addr + R)); \ +static bool reg_set_and_check(struct ixgbe_adapter *adapter, u64 *data, int reg, + u32 mask, u32 write) +{ + u32 val, before; + before = readl(adapter->hw.hw_addr + reg); + writel((write & mask), (adapter->hw.hw_addr + reg)); + val = readl(adapter->hw.hw_addr + reg); + if ((write & mask) != (val & mask)) { + e_err(drv, "set/check reg %04X test failed: got 0x%08X " + "expected 0x%08X\n", reg, (val & mask), (write & mask)); + *data = reg; + writel(before, (adapter->hw.hw_addr + reg)); + return 1; + } + writel(before, (adapter->hw.hw_addr + reg)); + return 0; } +#define REG_PATTERN_TEST(reg, mask, write) \ + do { \ + if (reg_pattern_test(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) \ + + +#define REG_SET_AND_CHECK(reg, mask, write) \ + do { \ + if (reg_set_and_check(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) \ + static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data) { const struct ixgbe_reg_test *test; @@ -1326,13 +1339,13 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data) switch (test->test_type) { case PATTERN_TEST: REG_PATTERN_TEST(test->reg + (i * 0x40), - test->mask, - test->write); + test->mask, + test->write); break; case SET_READ_TEST: REG_SET_AND_CHECK(test->reg + (i * 0x40), - test->mask, - test->write); + test->mask, + test->write); break; case WRITE_NO_TEST: writel(test->write, @@ -1341,18 +1354,18 @@ static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data) break; case TABLE32_TEST: REG_PATTERN_TEST(test->reg + (i * 4), - test->mask, - test->write); + test->mask, + test->write); break; case TABLE64_TEST_LO: REG_PATTERN_TEST(test->reg + (i * 8), - test->mask, - test->write); + test->mask, + test->write); break; case TABLE64_TEST_HI: REG_PATTERN_TEST((test->reg + 4) + (i * 8), - test->mask, - test->write); + test->mask, + test->write); break; } } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 9160811c6d7..eebb1921c66 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3862,9 +3862,10 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) gpie |= IXGBE_SDP1_GPIEN; - if (hw->mac.type == ixgbe_mac_82599EB) + if (hw->mac.type == ixgbe_mac_82599EB) { gpie |= IXGBE_SDP1_GPIEN; gpie |= IXGBE_SDP2_GPIEN; + } IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); } @@ -7468,8 +7469,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, /* print bus type/speed/width info */ e_dev_info("(PCI Express:%s:%s) %pM\n", - (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0Gb/s" : - hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5Gb/s" : + (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" : + hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" : "Unknown"), (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" : hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" : diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index edcaaebd72b..735f686c3b3 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -1222,7 +1222,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, swfw_mask = IXGBE_GSSR_PHY0_SM; do { - if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) { + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { status = IXGBE_ERR_SWFW_SYNC; goto read_byte_out; } @@ -1269,7 +1269,7 @@ s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, break; fail: - ixgbe_release_swfw_sync(hw, swfw_mask); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); msleep(100); ixgbe_i2c_bus_clear(hw); retry++; @@ -1280,7 +1280,7 @@ fail: } while (retry < max_retry); - ixgbe_release_swfw_sync(hw, swfw_mask); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); read_byte_out: return status; @@ -1308,7 +1308,7 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, else swfw_mask = IXGBE_GSSR_PHY0_SM; - if (ixgbe_acquire_swfw_sync(hw, swfw_mask) != 0) { + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { status = IXGBE_ERR_SWFW_SYNC; goto write_byte_out; } @@ -1352,7 +1352,7 @@ fail: hw_dbg(hw, "I2C byte write error.\n"); } while (retry < max_retry); - ixgbe_release_swfw_sync(hw, swfw_mask); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); write_byte_out: return status; diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index fab9737c0d6..b1d523ca4d8 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -1668,6 +1668,10 @@ #define IXGBE_ETH_LENGTH_OF_ADDRESS 6 +#define IXGBE_EEPROM_PAGE_SIZE_MAX 128 +#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */ +#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */ + #ifndef IXGBE_EEPROM_GRANT_ATTEMPTS #define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ #endif @@ -2563,7 +2567,9 @@ typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr, struct ixgbe_eeprom_operations { s32 (*init_params)(struct ixgbe_hw *); s32 (*read)(struct ixgbe_hw *, u16, u16 *); + s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *); s32 (*write)(struct ixgbe_hw *, u16, u16); + s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *); s32 (*validate_checksum)(struct ixgbe_hw *, u16 *); s32 (*update_checksum)(struct ixgbe_hw *); u16 (*calc_checksum)(struct ixgbe_hw *); @@ -2649,6 +2655,7 @@ struct ixgbe_eeprom_info { u32 semaphore_delay; u16 word_size; u16 address_bits; + u16 word_page_size; }; #define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01 diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c index 75c6465db89..4ed687be2fe 100644 --- a/drivers/net/ixgbe/ixgbe_x540.c +++ b/drivers/net/ixgbe/ixgbe_x540.c @@ -304,21 +304,49 @@ static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) } /** - * ixgbe_read_eerd_X540 - Read EEPROM word using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EERPOM + * ixgbe_read_eerd_X540- Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. **/ static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) { - s32 status; + s32 status = 0; - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) status = ixgbe_read_eerd_generic(hw, offset, data); else status = IXGBE_ERR_SWFW_SYNC; - ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM); + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the EERD register. + **/ +static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_read_eerd_buffer_generic(hw, offset, + words, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); return status; } @@ -344,6 +372,31 @@ static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) } /** + * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * Write a 16 bit word(s) to the EEPROM using the EEWR register. + **/ +static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_write_eewr_buffer_generic(hw, offset, + words, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum * * This function does not use synchronization for EERD and EEWR. It can @@ -851,7 +904,9 @@ static struct ixgbe_mac_operations mac_ops_X540 = { static struct ixgbe_eeprom_operations eeprom_ops_X540 = { .init_params = &ixgbe_init_eeprom_params_X540, .read = &ixgbe_read_eerd_X540, + .read_buffer = &ixgbe_read_eerd_buffer_X540, .write = &ixgbe_write_eewr_X540, + .write_buffer = &ixgbe_write_eewr_buffer_X540, .calc_checksum = &ixgbe_calc_eeprom_checksum_X540, .validate_checksum = &ixgbe_validate_eeprom_checksum_X540, .update_checksum = &ixgbe_update_eeprom_checksum_X540, |