diff options
| -rw-r--r-- | drivers/gpu/drm/drm_crtc.c | 19 | ||||
| -rw-r--r-- | include/drm/drm_crtc.h | 123 |
2 files changed, 116 insertions, 26 deletions
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 1dfc2860075..255658906fc 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1877,10 +1877,8 @@ int drm_mode_cursor_ioctl(struct drm_device *dev, if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; - if (!req->flags) { - DRM_ERROR("no operation set\n"); + if (!req->flags) return -EINVAL; - } mutex_lock(&dev->mode_config.mutex); obj = drm_mode_object_find(dev, req->crtc_id, DRM_MODE_OBJECT_CRTC); @@ -1893,7 +1891,6 @@ int drm_mode_cursor_ioctl(struct drm_device *dev, if (req->flags & DRM_MODE_CURSOR_BO) { if (!crtc->funcs->cursor_set) { - DRM_ERROR("crtc does not support cursor\n"); ret = -ENXIO; goto out; } @@ -1906,7 +1903,6 @@ int drm_mode_cursor_ioctl(struct drm_device *dev, if (crtc->funcs->cursor_move) { ret = crtc->funcs->cursor_move(crtc, req->x, req->y); } else { - DRM_ERROR("crtc does not support cursor\n"); ret = -EFAULT; goto out; } @@ -1989,14 +1985,11 @@ int drm_mode_addfb(struct drm_device *dev, if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EINVAL; - if ((config->min_width > r.width) || (r.width > config->max_width)) { - DRM_ERROR("mode new framebuffer width not within limits\n"); + if ((config->min_width > r.width) || (r.width > config->max_width)) return -EINVAL; - } - if ((config->min_height > r.height) || (r.height > config->max_height)) { - DRM_ERROR("mode new framebuffer height not within limits\n"); + + if ((config->min_height > r.height) || (r.height > config->max_height)) return -EINVAL; - } mutex_lock(&dev->mode_config.mutex); @@ -2110,7 +2103,6 @@ int drm_mode_rmfb(struct drm_device *dev, obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB); /* TODO check that we really get a framebuffer back. */ if (!obj) { - DRM_ERROR("mode invalid framebuffer id\n"); ret = -EINVAL; goto out; } @@ -2121,7 +2113,6 @@ int drm_mode_rmfb(struct drm_device *dev, found = 1; if (!found) { - DRM_ERROR("tried to remove a fb that we didn't own\n"); ret = -EINVAL; goto out; } @@ -2168,7 +2159,6 @@ int drm_mode_getfb(struct drm_device *dev, mutex_lock(&dev->mode_config.mutex); obj = drm_mode_object_find(dev, r->fb_id, DRM_MODE_OBJECT_FB); if (!obj) { - DRM_ERROR("invalid framebuffer id\n"); ret = -EINVAL; goto out; } @@ -2204,7 +2194,6 @@ int drm_mode_dirtyfb_ioctl(struct drm_device *dev, mutex_lock(&dev->mode_config.mutex); obj = drm_mode_object_find(dev, r->fb_id, DRM_MODE_OBJECT_FB); if (!obj) { - DRM_ERROR("invalid framebuffer id\n"); ret = -EINVAL; goto out_err1; } diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 6718b1873df..dd557272eca 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -120,7 +120,6 @@ struct drm_display_mode { char name[DRM_DISPLAY_MODE_LEN]; - int connector_count; enum drm_mode_status status; int type; @@ -345,10 +344,21 @@ struct drm_crtc_funcs { /** * drm_crtc - central CRTC control structure + * @dev: parent DRM device + * @head: list management + * @base: base KMS object for ID tracking etc. * @enabled: is this CRTC enabled? + * @mode: current mode timings + * @hwmode: mode timings as programmed to hw regs * @x: x position on screen * @y: y position on screen * @funcs: CRTC control functions + * @gamma_size: size of gamma ramp + * @gamma_store: gamma ramp values + * @framedur_ns: precise frame timing + * @framedur_ns: precise line timing + * @pixeldur_ns: precise pixel timing + * @helper_private: mid-layer private data * * Each CRTC may have one or more connectors associated with it. This structure * allows the CRTC to be controlled. @@ -427,6 +437,13 @@ struct drm_connector_funcs { void (*force)(struct drm_connector *connector); }; +/** + * drm_encoder_funcs - encoder controls + * @reset: reset state (e.g. at init or resume time) + * @destroy: cleanup and free associated data + * + * Encoders sit between CRTCs and connectors. + */ struct drm_encoder_funcs { void (*reset)(struct drm_encoder *encoder); void (*destroy)(struct drm_encoder *encoder); @@ -439,6 +456,18 @@ struct drm_encoder_funcs { /** * drm_encoder - central DRM encoder structure + * @dev: parent DRM device + * @head: list management + * @base: base KMS object + * @encoder_type: one of the %DRM_MODE_ENCODER_<foo> types in drm_mode.h + * @possible_crtcs: bitmask of potential CRTC bindings + * @possible_clones: bitmask of potential sibling encoders for cloning + * @crtc: currently bound CRTC + * @funcs: control functions + * @helper_private: mid-layer private data + * + * CRTCs drive pixels to encoders, which convert them into signals + * appropriate for a given connector or set of connectors. */ struct drm_encoder { struct drm_device *dev; @@ -474,14 +503,37 @@ enum drm_connector_force { /** * drm_connector - central DRM connector control structure - * @crtc: CRTC this connector is currently connected to, NULL if none + * @dev: parent DRM device + * @kdev: kernel device for sysfs attributes + * @attr: sysfs attributes + * @head: list management + * @base: base KMS object + * @connector_type: one of the %DRM_MODE_CONNECTOR_<foo> types from drm_mode.h + * @connector_type_id: index into connector type enum * @interlace_allowed: can this connector handle interlaced modes? * @doublescan_allowed: can this connector handle doublescan? - * @available_modes: modes available on this connector (from get_modes() + user) - * @initial_x: initial x position for this connector - * @initial_y: initial y position for this connector - * @status: connector connected? + * @modes: modes available on this connector (from fill_modes() + user) + * @status: one of the drm_connector_status enums (connected, not, or unknown) + * @probed_modes: list of modes derived directly from the display + * @display_info: information about attached display (e.g. from EDID) * @funcs: connector control functions + * @user_modes: user added mode list + * @edid_blob_ptr: DRM property containing EDID if present + * @property_ids: property tracking for this connector + * @property_values: value pointers or data for properties + * @polled: a %DRM_CONNECTOR_POLL_<foo> value for core driven polling + * @dpms: current dpms state + * @helper_private: mid-layer private data + * @force: a %DRM_FORCE_<foo> state for forced mode sets + * @encoder_ids: valid encoders for this connector + * @encoder: encoder driving this connector, if any + * @eld: EDID-like data, if present + * @dvi_dual: dual link DVI, if found + * @max_tmds_clock: max clock rate, if found + * @latency_present: AV delay info from ELD, if found + * @video_latency: video latency info from ELD, if found + * @audio_latency: audio latency info from ELD, if found + * @null_edid_counter: track sinks that give us all zeros for the EDID * * Each connector may be connected to one or more CRTCs, or may be clonable by * another connector if they can share a CRTC. Each connector also has a specific @@ -502,7 +554,6 @@ struct drm_connector { bool doublescan_allowed; struct list_head modes; /* list of modes on this connector */ - int initial_x, initial_y; enum drm_connector_status status; /* these are modes added by probing with DDC or the BIOS */ @@ -526,7 +577,6 @@ struct drm_connector { /* forced on connector */ enum drm_connector_force force; uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; - uint32_t force_encoder_id; struct drm_encoder *encoder; /* currently active encoder */ /* EDID bits */ @@ -596,7 +646,15 @@ struct drm_plane { }; /** - * struct drm_mode_set + * drm_mode_set - new values for a CRTC config change + * @head: list management + * @fb: framebuffer to use for new config + * @crtc: CRTC whose configuration we're about to change + * @mode: mode timings to use + * @x: position of this CRTC relative to @fb + * @y: position of this CRTC relative to @fb + * @connectors: array of connectors to drive with this CRTC if possible + * @num_connectors: size of @connectors array * * Represents a single crtc the connectors that it drives with what mode * and from which framebuffer it scans out from. @@ -618,13 +676,33 @@ struct drm_mode_set { }; /** - * struct drm_mode_config_funcs - configure CRTCs for a given screen layout + * struct drm_mode_config_funcs - basic driver provided mode setting functions + * @fb_create: create a new framebuffer object + * @output_poll_changed: function to handle output configuration changes + * + * Some global (i.e. not per-CRTC, connector, etc) mode setting functions that + * involve drivers. */ struct drm_mode_config_funcs { - struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, struct drm_mode_fb_cmd2 *mode_cmd); + struct drm_framebuffer *(*fb_create)(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_mode_fb_cmd2 *mode_cmd); void (*output_poll_changed)(struct drm_device *dev); }; +/** + * drm_mode_group - group of mode setting resources for potential sub-grouping + * @num_crtcs: CRTC count + * @num_encoders: encoder count + * @num_connectors: connector count + * @id_list: list of KMS object IDs in this group + * + * Currently this simply tracks the global mode setting state. But in the + * future it could allow groups of objects to be set aside into independent + * control groups for use by different user level processes (e.g. two X servers + * running simultaneously on different heads, each with their own mode + * configuration and freedom of mode setting). + */ struct drm_mode_group { uint32_t num_crtcs; uint32_t num_encoders; @@ -636,7 +714,30 @@ struct drm_mode_group { /** * drm_mode_config - Mode configuration control structure + * @mutex: mutex protecting KMS related lists and structures + * @idr_mutex: mutex for KMS ID allocation and management + * @crtc_idr: main KMS ID tracking object + * @num_fb: number of fbs available + * @fb_list: list of framebuffers available + * @num_connector: number of connectors on this device + * @connector_list: list of connector objects + * @num_encoder: number of encoders on this device + * @encoder_list: list of encoder objects + * @num_crtc: number of CRTCs on this device + * @crtc_list: list of CRTC objects + * @min_width: minimum pixel width on this device + * @min_height: minimum pixel height on this device + * @max_width: maximum pixel width on this device + * @max_height: maximum pixel height on this device + * @funcs: core driver provided mode setting functions + * @fb_base: base address of the framebuffer + * @poll_enabled: track polling status for this device + * @output_poll_work: delayed work for polling in process context + * @*_property: core property tracking * + * Core mode resource tracking structure. All CRTC, encoders, and connectors + * enumerated by the driver are added here, as are global properties. Some + * global restrictions are also here, e.g. dimension restrictions. */ struct drm_mode_config { struct mutex mutex; /* protects configuration (mode lists etc.) */ |