diff options
39 files changed, 1700 insertions, 843 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 92e1ab8178a..040fee60728 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -229,14 +229,6 @@ and is between 256 and 4096 characters. It is defined in the file to assume that this machine's pmtimer latches its value and always returns good values. - acpi.power_nocheck= [HW,ACPI] - Format: 1/0 enable/disable the check of power state. - On some bogus BIOS the _PSC object/_STA object of - power resource can't return the correct device power - state. In such case it is unneccessary to check its - power state again in power transition. - 1 : disable the power state check - acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode Format: { level | edge | high | low } diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 78e354b42f6..f2296ecedb8 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -920,7 +920,7 @@ The available commands are: echo '<LED number> off' >/proc/acpi/ibm/led echo '<LED number> blink' >/proc/acpi/ibm/led -The <LED number> range is 0 to 7. The set of LEDs that can be +The <LED number> range is 0 to 15. The set of LEDs that can be controlled varies from model to model. Here is the common ThinkPad mapping: @@ -932,6 +932,11 @@ mapping: 5 - UltraBase battery slot 6 - (unknown) 7 - standby + 8 - dock status 1 + 9 - dock status 2 + 10, 11 - (unknown) + 12 - thinkvantage + 13, 14, 15 - (unknown) All of the above can be turned on and off and can be made to blink. @@ -940,10 +945,12 @@ sysfs notes: The ThinkPad LED sysfs interface is described in detail by the LED class documentation, in Documentation/leds-class.txt. -The leds are named (in LED ID order, from 0 to 7): +The LEDs are named (in LED ID order, from 0 to 12): "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt", "tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt", -"tpacpi::unknown_led", "tpacpi::standby". +"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1", +"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3", +"tpacpi::thinkvantage". Due to limitations in the sysfs LED class, if the status of the LED indicators cannot be read due to an error, thinkpad-acpi will report it as @@ -958,6 +965,12 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the "timer" trigger, and leave the delay_on and delay_off parameters set to zero (to request hardware acceleration autodetection). +LEDs that are known not to exist in a given ThinkPad model are not +made available through the sysfs interface. If you have a dock and you +notice there are LEDs listed for your ThinkPad that do not exist (and +are not in the dock), or if you notice that there are missing LEDs, +a report to ibm-acpi-devel@lists.sourceforge.net is appreciated. + ACPI sounds -- /proc/acpi/ibm/beep ---------------------------------- @@ -1156,17 +1169,19 @@ may not be distinct. Later Lenovo models that implement the ACPI display backlight brightness control methods have 16 levels, ranging from 0 to 15. -There are two interfaces to the firmware for direct brightness control, -EC and UCMS (or CMOS). To select which one should be used, use the -brightness_mode module parameter: brightness_mode=1 selects EC mode, -brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC -mode with NVRAM backing (so that brightness changes are remembered -across shutdown/reboot). +For IBM ThinkPads, there are two interfaces to the firmware for direct +brightness control, EC and UCMS (or CMOS). To select which one should be +used, use the brightness_mode module parameter: brightness_mode=1 selects +EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC +mode with NVRAM backing (so that brightness changes are remembered across +shutdown/reboot). The driver tries to select which interface to use from a table of defaults for each ThinkPad model. If it makes a wrong choice, please report this as a bug, so that we can fix it. +Lenovo ThinkPads only support brightness_mode=2 (UCMS). + When display backlight brightness controls are available through the standard ACPI interface, it is best to use it instead of this direct ThinkPad-specific interface. The driver will disable its native @@ -1254,7 +1269,7 @@ Fan control and monitoring: fan speed, fan enable/disable procfs: /proc/acpi/ibm/fan sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1, - pwm1_enable + pwm1_enable, fan2_input sysfs hwmon driver attributes: fan_watchdog NOTE NOTE NOTE: fan control operations are disabled by default for @@ -1267,6 +1282,9 @@ from the hardware registers of the embedded controller. This is known to work on later R, T, X and Z series ThinkPads but may show a bogus value on other models. +Some Lenovo ThinkPads support a secondary fan. This fan cannot be +controlled separately, it shares the main fan control. + Fan levels: Most ThinkPad fans work in "levels" at the firmware interface. Level 0 @@ -1397,6 +1415,11 @@ hwmon device attribute fan1_input: which can take up to two minutes. May return rubbish on older ThinkPads. +hwmon device attribute fan2_input: + Fan tachometer reading, in RPM, for the secondary fan. + Available only on some ThinkPads. If the secondary fan is + not installed, will always read 0. + hwmon driver attribute fan_watchdog: Fan safety watchdog timer interval, in seconds. Minimum is 1 second, maximum is 120 seconds. 0 disables the watchdog. @@ -1555,3 +1578,7 @@ Sysfs interface changelog: 0x020300: hotkey enable/disable support removed, attributes hotkey_bios_enabled and hotkey_enable deprecated and marked for removal. + +0x020400: Marker for 16 LEDs support. Also, LEDs that are known + to not exist in a given model are not registered with + the LED sysfs class anymore. diff --git a/MAINTAINERS b/MAINTAINERS index 303129ab4b7..7d9d3745aab 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -230,6 +230,13 @@ L: linux-acenic@sunsite.dk S: Maintained F: drivers/net/acenic* +ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER +P: Peter Feuerer +M: peter@piie.net +W: http://piie.net/?section=acerhdf +S: Maintained +F: drivers/platform/x86/acerhdf.c + ACER WMI LAPTOP EXTRAS P: Carlos Corbacho M: carlos@strangeworlds.co.uk diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c index cbe6cee5a55..dbda7bde611 100644 --- a/arch/ia64/kernel/acpi-processor.c +++ b/arch/ia64/kernel/acpi-processor.c @@ -71,3 +71,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) } EXPORT_SYMBOL(arch_acpi_processor_init_pdc); + +void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) +{ + if (pr->pdc) { + kfree(pr->pdc->pointer->buffer.pointer); + kfree(pr->pdc->pointer); + kfree(pr->pdc); + pr->pdc = NULL; + } +} + +EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 4518dc50090..20d1465a2ab 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -144,6 +144,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate) #else /* !CONFIG_ACPI */ +#define acpi_disabled 1 #define acpi_lapic 0 #define acpi_ioapic 0 static inline void acpi_noirq_set(void) { } diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index cb739cc0a08..d419f5c0266 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -121,6 +121,9 @@ extern int __init pcibios_init(void); extern int __init pci_mmcfg_arch_init(void); extern void __init pci_mmcfg_arch_free(void); +extern struct acpi_mcfg_allocation *pci_mmcfg_config; +extern int pci_mmcfg_config_num; + /* * AMD Fam10h CPUs are buggy, and cannot access MMIO config space * on their northbrige except through the * %eax register. As such, you MUST diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 631086159c5..6b8ca3a0285 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -44,11 +44,7 @@ static int __initdata acpi_force = 0; u32 acpi_rsdt_forced; -#ifdef CONFIG_ACPI -int acpi_disabled = 0; -#else -int acpi_disabled = 1; -#endif +int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 @@ -122,72 +118,6 @@ void __init __acpi_unmap_table(char *map, unsigned long size) early_iounmap(map, size); } -#ifdef CONFIG_PCI_MMCONFIG - -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; - -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_mcfg_allocation *pci_mmcfg_config; -int pci_mmcfg_config_num; - -static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) -{ - if (!strcmp(mcfg->header.oem_id, "SGI")) - acpi_mcfg_64bit_base_addr = TRUE; - - return 0; -} - -int __init acpi_parse_mcfg(struct acpi_table_header *header) -{ - struct acpi_table_mcfg *mcfg; - unsigned long i; - int config_size; - - if (!header) - return -EINVAL; - - mcfg = (struct acpi_table_mcfg *)header; - - /* how many config structures do we have */ - pci_mmcfg_config_num = 0; - i = header->length - sizeof(struct acpi_table_mcfg); - while (i >= sizeof(struct acpi_mcfg_allocation)) { - ++pci_mmcfg_config_num; - i -= sizeof(struct acpi_mcfg_allocation); - }; - if (pci_mmcfg_config_num == 0) { - printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); - return -ENODEV; - } - - config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); - pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); - if (!pci_mmcfg_config) { - printk(KERN_WARNING PREFIX - "No memory for MCFG config tables\n"); - return -ENOMEM; - } - - memcpy(pci_mmcfg_config, &mcfg[1], config_size); - - acpi_mcfg_oem_check(mcfg); - - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && - !acpi_mcfg_64bit_base_addr) { - printk(KERN_ERR PREFIX - "MMCONFIG not in low 4GB of memory\n"); - kfree(pci_mmcfg_config); - pci_mmcfg_config_num = 0; - return -ENODEV; - } - } - - return 0; -} -#endif /* CONFIG_PCI_MMCONFIG */ - #ifdef CONFIG_X86_LOCAL_APIC static int __init acpi_parse_madt(struct acpi_table_header *table) { @@ -1519,14 +1449,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, { .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, - { - .callback = force_acpi_ht, .ident = "ASUS P2B-DS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index bbbe4bbb6f3..8c44c232efc 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -34,12 +34,22 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, flags->bm_check = 1; else if (c->x86_vendor == X86_VENDOR_INTEL) { /* - * Today all CPUs that support C3 share cache. - * TBD: This needs to look at cache shared map, once - * multi-core detection patch makes to the base. + * Today all MP CPUs that support C3 share cache. + * And caches should not be flushed by software while + * entering C3 type state. */ flags->bm_check = 1; } + + /* + * On all recent Intel platforms, ARB_DISABLE is a nop. + * So, set bm_control to zero to indicate that ARB_DISABLE + * is not required while entering C3 type state on + * P4, Core and beyond CPUs + */ + if (c->x86_vendor == X86_VENDOR_INTEL && + (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14))) + flags->bm_control = 0; } EXPORT_SYMBOL(acpi_processor_power_init_bm_check); diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index 7c074eec39f..d296f4a195c 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -72,6 +72,7 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) return; } + /* Initialize _PDC data based on the CPU vendor */ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) { @@ -85,3 +86,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) } EXPORT_SYMBOL(arch_acpi_processor_init_pdc); + +void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) +{ + if (pr->pdc) { + kfree(pr->pdc->pointer->buffer.pointer); + kfree(pr->pdc->pointer); + kfree(pr->pdc); + pr->pdc = NULL; + } +} + +EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 8766b0e216c..712443ec6d4 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -523,6 +523,69 @@ reject: static int __initdata known_bridge; +static int acpi_mcfg_64bit_base_addr __initdata = FALSE; + +/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ +struct acpi_mcfg_allocation *pci_mmcfg_config; +int pci_mmcfg_config_num; + +static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) +{ + if (!strcmp(mcfg->header.oem_id, "SGI")) + acpi_mcfg_64bit_base_addr = TRUE; + + return 0; +} + +static int __init pci_parse_mcfg(struct acpi_table_header *header) +{ + struct acpi_table_mcfg *mcfg; + unsigned long i; + int config_size; + + if (!header) + return -EINVAL; + + mcfg = (struct acpi_table_mcfg *)header; + + /* how many config structures do we have */ + pci_mmcfg_config_num = 0; + i = header->length - sizeof(struct acpi_table_mcfg); + while (i >= sizeof(struct acpi_mcfg_allocation)) { + ++pci_mmcfg_config_num; + i -= sizeof(struct acpi_mcfg_allocation); + }; + if (pci_mmcfg_config_num == 0) { + printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); + return -ENODEV; + } + + config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); + pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); + if (!pci_mmcfg_config) { + printk(KERN_WARNING PREFIX + "No memory for MCFG config tables\n"); + return -ENOMEM; + } + + memcpy(pci_mmcfg_config, &mcfg[1], config_size); + + acpi_mcfg_oem_check(mcfg); + + for (i = 0; i < pci_mmcfg_config_num; ++i) { + if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && + !acpi_mcfg_64bit_base_addr) { + printk(KERN_ERR PREFIX + "MMCONFIG not in low 4GB of memory\n"); + kfree(pci_mmcfg_config); + pci_mmcfg_config_num = 0; + return -ENODEV; + } + } + + return 0; +} + static void __init __pci_mmcfg_init(int early) { /* MMCONFIG disabled */ @@ -543,7 +606,7 @@ static void __init __pci_mmcfg_init(int early) } if (!known_bridge) - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); pci_mmcfg_reject_broken(early); diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 09c69806c1f..f6baa77deef 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -192,6 +192,22 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), }, }, + { + .callback = dmi_disable_osi_vista, + .ident = "Sony VGN-NS10J_S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "Sony VGN-SR290J", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"), + }, + }, /* * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 8bd2c2a6884..a8a5c29958c 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -140,46 +140,6 @@ struct device *acpi_get_physical_device(acpi_handle handle) EXPORT_SYMBOL(acpi_get_physical_device); -/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge - * This should work in general, but did not on a Lenovo T61 for the - * graphics card. But this must be fixed when the PCI device is - * bound and the kernel device struct is attached to the acpi device - * Note: A success call will increase reference count by one - * Do call put_device(dev) on the returned device then - */ -struct device *acpi_get_physical_pci_device(acpi_handle handle) -{ - struct device *dev; - long long device_id; - acpi_status status; - - status = - acpi_evaluate_integer(handle, "_ADR", NULL, &device_id); - - if (ACPI_FAILURE(status)) - return NULL; - - /* We need to attempt to determine whether the _ADR refers to a - PCI device or not. There's no terribly good way to do this, - so the best we can hope for is to assume that there'll never - be a device in the host bridge */ - if (device_id >= 0x10000) { - /* It looks like a PCI device. Does it exist? */ - dev = acpi_get_physical_device(handle); - } else { - /* It doesn't look like a PCI device. Does its parent - exist? */ - acpi_handle phandle; - if (acpi_get_parent(handle, &phandle)) - return NULL; - dev = acpi_get_physical_device(phandle); - } - if (!dev) - return NULL; - return dev; -} -EXPORT_SYMBOL(acpi_get_physical_pci_device); - static int acpi_bind_one(struct device *dev, acpi_handle handle) { struct acpi_device *acpi_dev; diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index d916bea729f..71670719d61 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -79,6 +79,7 @@ static acpi_osd_handler acpi_irq_handler; static void *acpi_irq_context; static struct workqueue_struct *kacpid_wq; static struct workqueue_struct *kacpi_notify_wq; +static struct workqueue_struct *kacpi_hotplug_wq; struct acpi_res_list { resource_size_t start; @@ -192,8 +193,10 @@ acpi_status acpi_os_initialize1(void) { kacpid_wq = create_singlethread_workqueue("kacpid"); kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify"); + kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug"); BUG_ON(!kacpid_wq); BUG_ON(!kacpi_notify_wq); + BUG_ON(!kacpi_hotplug_wq); return AE_OK; } @@ -206,6 +209,7 @@ acpi_status acpi_os_terminate(void) destroy_workqueue(kacpid_wq); destroy_workqueue(kacpi_notify_wq); + destroy_workqueue(kacpi_hotplug_wq); return AE_OK; } @@ -716,6 +720,7 @@ static acpi_status __acpi_os_execute(acpi_execute_type type, acpi_status status = AE_OK; struct acpi_os_dpc *dpc; struct workqueue_struct *queue; + work_func_t func; int ret; ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Scheduling function [%p(%p)] for deferred execution.\n", @@ -740,15 +745,17 @@ static acpi_status __acpi_os_execute(acpi_execute_type type, dpc->function = function; dpc->context = context; - if (!hp) { - INIT_WORK(&dpc->work, acpi_os_execute_deferred); - queue = (type == OSL_NOTIFY_HANDLER) ? - kacpi_notify_wq : kacpid_wq; - ret = queue_work(queue, &dpc->work); - } else { - INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred); - ret = schedule_work(&dpc->work); - } + /* + * We can't run hotplug code in keventd_wq/kacpid_wq/kacpid_notify_wq + * because the hotplug code may call driver .remove() functions, + * which invoke flush_scheduled_work/acpi_os_wait_events_complete + * to flush these workqueues. + */ + queue = hp ? kacpi_hotplug_wq : + (type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq); + func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred; + INIT_WORK(&dpc->work, func); + ret = queue_work(queue, &dpc->work); if (!ret) { printk(KERN_ERR PREFIX diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index bc46de3d967..a5a77b78a72 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -24,12 +24,7 @@ */ #include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> #include <linux/types.h> -#include <linux/proc_fs.h> -#include <linux/spinlock.h> -#include <linux/pm.h> #include <linux/pci.h> #include <linux/acpi.h> #include <acpi/acpi_bus.h> @@ -38,310 +33,76 @@ #define _COMPONENT ACPI_PCI_COMPONENT ACPI_MODULE_NAME("pci_bind"); -struct acpi_pci_data { - struct acpi_pci_id id; - struct pci_bus *bus; - struct pci_dev *dev; -}; - -static int acpi_pci_unbind(struct acpi_device *device); - -static void acpi_pci_data_handler(acpi_handle handle, u32 function, - void *context) -{ - - /* TBD: Anything we need to do here? */ - - return; -} - -/** - * acpi_get_pci_id - * ------------------ - * This function is used by the ACPI Interpreter (a.k.a. Core Subsystem) - * to resolve PCI information for ACPI-PCI devices defined in the namespace. - * This typically occurs when resolving PCI operation region information. - */ -acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id) +static int acpi_pci_unbind(struct acpi_device *device) { - int result = 0; - acpi_status status = AE_OK; - struct acpi_device *device = NULL; - struct acpi_pci_data *data = NULL; - - - if (!id) - return AE_BAD_PARAMETER; - - result = acpi_bus_get_device(handle, &device); - if (result) { - printk(KERN_ERR PREFIX - "Invalid ACPI Bus context for device %s\n", - acpi_device_bid(device)); - return AE_NOT_EXIST; - } - - status = acpi_get_data(handle, acpi_pci_data_handler, (void **)&data); - if (ACPI_FAILURE(status) || !data) { - ACPI_EXCEPTION((AE_INFO, status, - "Invalid ACPI-PCI context for device %s", - acpi_device_bid(device))); - return status; - } + struct pci_dev *dev; - *id = data->id; + dev = acpi_get_pci_dev(device->handle); + if (!dev || !dev->subordinate) + goto out; - /* - id->segment = data->id.segment; - id->bus = data->id.bus; - id->device = data->id.device; - id->function = data->id.function; - */ + acpi_pci_irq_del_prt(dev->subordinate); - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Device %s has PCI address %04x:%02x:%02x.%d\n", - acpi_device_bid(device), id->segment, id->bus, - id->device, id->function)); + device->ops.bind = NULL; + device->ops.unbind = NULL; - return AE_OK; +out: + pci_dev_put(dev); + return 0; } -EXPORT_SYMBOL(acpi_get_pci_id); - -int acpi_pci_bind(struct acpi_device *device) +static int acpi_pci_bind(struct acpi_device *device) { - int result = 0; acpi_status status; - struct acpi_pci_data *data; - struct acpi_pci_data *pdata; - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_handle handle; + struct pci_bus *bus; + struct pci_dev *dev; - if (!device || !device->parent) - return -EINVAL; - - data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer); - if (ACPI_FAILURE(status)) { - kfree(data); - return -ENODEV; - } - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n", - (char *)buffer.pointer)); - - /* - * Segment & Bus - * ------------- - * These are obtained via the parent device's ACPI-PCI context. - */ - status = acpi_get_data(device->parent->handle, acpi_pci_data_handler, - (void **)&pdata); - if (ACPI_FAILURE(status) || !pdata || !pdata->bus) { - ACPI_EXCEPTION((AE_INFO, status, - "Invalid ACPI-PCI context for parent device %s", - acpi_device_bid(device->parent))); - result = -ENODEV; - goto end; - } - data->id.segment = pdata->id.segment; - data->id.bus = pdata->bus->number; - - /* - * Device & Function - * ----------------- - * These are simply obtained from the device's _ADR method. Note - * that a value of zero is valid. - */ - data->id.device = device->pnp.bus_address >> 16; - data->id.function = device->pnp.bus_address & 0xFFFF; - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "...to %04x:%02x:%02x.%d\n", - data->id.segment, data->id.bus, data->id.device, - data->id.function)); - - /* - * TBD: Support slot devices (e.g. function=0xFFFF). - */ - - /* - * Locate PCI Device - * ----------------- - * Locate matching device in PCI namespace. If it doesn't exist - * this typically means that the device isn't currently inserted - * (e.g. docking station, port replicator, etc.). - */ - data->dev = pci_get_slot(pdata->bus, - PCI_DEVFN(data->id.device, data->id.function)); - if (!data->dev) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Device %04x:%02x:%02x.%d not present in PCI namespace\n", - data->id.segment, data->id.bus, - data->id.device, data->id.function)); - result = -ENODEV; - goto end; - } - if (!data->dev->bus) { - printk(KERN_ERR PREFIX - "Device %04x:%02x:%02x.%d has invalid 'bus' field\n", - data->id.segment, data->id.bus, - data->id.device, data->id.function);< |