diff options
54 files changed, 1400 insertions, 959 deletions
diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c index 25fe6685393..5c8c6ef1fc5 100644 --- a/arch/i386/kernel/pci-dma.c +++ b/arch/i386/kernel/pci-dma.c @@ -75,7 +75,7 @@ EXPORT_SYMBOL(dma_free_coherent); int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, dma_addr_t device_addr, size_t size, int flags) { - void __iomem *mem_base; + void __iomem *mem_base = NULL; int pages = size >> PAGE_SHIFT; int bitmap_size = (pages + 31)/32; @@ -114,6 +114,8 @@ int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, free1_out: kfree(dev->dma_mem->bitmap); out: + if (mem_base) + iounmap(mem_base); return 0; } EXPORT_SYMBOL(dma_declare_coherent_memory); diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index cdfcf971098..53ca6e89798 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -20,7 +20,7 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | PCI_PROBE_MMCONF; -int pci_bf_sort; +static int pci_bf_sort; int pci_routeirq; int pcibios_last_bus = -1; unsigned long pirq_table_addr; diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index c1949ff38d6..cde1170b01a 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -74,52 +74,6 @@ static void __devinit pci_fixup_ncr53c810(struct pci_dev *d) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810); -static void __devinit pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - DBG("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -static void __devinit pci_fixup_ide_trash(struct pci_dev *d) -{ - int i; - - /* - * Runs the fixup only for the first IDE controller - * (Shai Fultheim - shai@ftcon.com) - */ - static int called = 0; - if (called) - return; - called = 1; - - /* - * There exist PCI IDE controllers which have utter garbage - * in first four base registers. Ignore that. - */ - DBG("PCI: IDE base address trash cleared for %s\n", pci_name(d)); - for(i=0; i<4; i++) - d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0; -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, pci_fixup_ide_trash); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_11, pci_fixup_ide_trash); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_9, pci_fixup_ide_trash); - static void __devinit pci_fixup_latency(struct pci_dev *d) { /* diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 98580292f0d..43005f04442 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -104,16 +104,24 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) /* Depth-First Search on bus tree */ list_for_each_entry(bus, bus_list, node) { if ((dev = bus->self)) { - for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { + for (idx = PCI_BRIDGE_RESOURCES; + idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; if (!r->flags) continue; pr = pci_find_parent_resource(dev, r); - if (!r->start || !pr || request_resource(pr, r) < 0) { - printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); - /* Something is wrong with the region. - Invalidate the resource to prevent child - resource allocations in this range. */ + if (!r->start || !pr || + request_resource(pr, r) < 0) { + printk(KERN_ERR "PCI: Cannot allocate " + "resource region %d " + "of bridge %s\n", + idx, pci_name(dev)); + /* + * Something is wrong with the region. + * Invalidate the resource to prevent + * child resource allocations in this + * range. + */ r->flags = 0; } } @@ -131,7 +139,7 @@ static void __init pcibios_allocate_resources(int pass) for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); - for(idx = 0; idx < 6; idx++) { + for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) { r = &dev->resource[idx]; if (r->parent) /* Already allocated */ continue; @@ -142,11 +150,15 @@ static void __init pcibios_allocate_resources(int pass) else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) { - DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n", + DBG("PCI: Resource %08lx-%08lx " + "(f=%lx, d=%d, p=%d)\n", r->start, r->end, r->flags, disabled, pass); pr = pci_find_parent_resource(dev, r); if (!pr || request_resource(pr, r) < 0) { - printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev)); + printk(KERN_ERR "PCI: Cannot allocate " + "resource region %d " + "of device %s\n", + idx, pci_name(dev)); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; @@ -156,12 +168,16 @@ static void __init pcibios_allocate_resources(int pass) if (!pass) { r = &dev->resource[PCI_ROM_RESOURCE]; if (r->flags & IORESOURCE_ROM_ENABLE) { - /* Turn the ROM off, leave the resource region, but keep it unregistered. */ + /* Turn the ROM off, leave the resource region, + * but keep it unregistered. */ u32 reg; - DBG("PCI: Switching off ROM of %s\n", pci_name(dev)); + DBG("PCI: Switching off ROM of %s\n", + pci_name(dev)); r->flags &= ~IORESOURCE_ROM_ENABLE; - pci_read_config_dword(dev, dev->rom_base_reg, ®); - pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE); + pci_read_config_dword(dev, + dev->rom_base_reg, ®); + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); } } } @@ -173,9 +189,11 @@ static int __init pcibios_assign_resources(void) struct resource *r, *pr; if (!(pci_probe & PCI_ASSIGN_ROMS)) { - /* Try to use BIOS settings for ROMs, otherwise let - pci_assign_unassigned_resources() allocate the new - addresses. */ + /* + * Try to use BIOS settings for ROMs, otherwise let + * pci_assign_unassigned_resources() allocate the new + * addresses. + */ for_each_pci_dev(dev) { r = &dev->resource[PCI_ROM_RESOURCE]; if (!r->flags || !r->start) @@ -215,9 +233,9 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; - for(idx = 0; idx < PCI_NUM_RESOURCES; idx++) { + for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) { /* Only set up the requested stuff */ - if (!(mask & (1<<idx))) + if (!(mask & (1 << idx))) continue; r = &dev->resource[idx]; @@ -227,7 +245,9 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) (!(r->flags & IORESOURCE_ROM_ENABLE))) continue; if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); + printk(KERN_ERR "PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); return -EINVAL; } if (r->flags & IORESOURCE_IO) @@ -236,7 +256,8 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) cmd |= PCI_COMMAND_MEMORY; } if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd); + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); pci_write_config_word(dev, PCI_COMMAND, cmd); } return 0; @@ -258,7 +279,8 @@ void pcibios_set_master(struct pci_dev *dev) lat = pcibios_max_latency; else return; - printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); + printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); } diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index 69163998ade..e65551cd821 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -543,6 +543,12 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route case PCI_DEVICE_ID_INTEL_ICH8_2: case PCI_DEVICE_ID_INTEL_ICH8_3: case PCI_DEVICE_ID_INTEL_ICH8_4: + case PCI_DEVICE_ID_INTEL_ICH9_0: + case PCI_DEVICE_ID_INTEL_ICH9_1: + case PCI_DEVICE_ID_INTEL_ICH9_2: + case PCI_DEVICE_ID_INTEL_ICH9_3: + case PCI_DEVICE_ID_INTEL_ICH9_4: + case PCI_DEVICE_ID_INTEL_ICH9_5: r->name = "PIIX/ICH"; r->get = pirq_piix_get; r->set = pirq_piix_set; diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index b30be7c48ba..f4edfbf2713 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -469,10 +469,11 @@ pcibios_fixup_resources(struct pci_dev *dev, int start, int limit) } } -static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) +void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) { pcibios_fixup_resources(dev, 0, PCI_BRIDGE_RESOURCES); } +EXPORT_SYMBOL_GPL(pcibios_fixup_device_resources); static void __devinit pcibios_fixup_bridge_resources(struct pci_dev *dev) { @@ -493,6 +494,7 @@ pcibios_fixup_bus (struct pci_bus *b) } list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); + platform_pci_fixup_bus(b); return; } @@ -738,75 +740,44 @@ int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) return ret; } +/* It's defined in drivers/pci/pci.c */ +extern u8 pci_cache_line_size; + /** - * pci_cacheline_size - determine cacheline size for PCI devices - * @dev: void + * set_pci_cacheline_size - determine cacheline size for PCI devices * * We want to use the line-size of the outer-most cache. We assume * that this line-size is the same for all CPUs. * * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info(). - * - * RETURNS: An appropriate -ERRNO error value on eror, or zero for success. */ -static unsigned long -pci_cacheline_size (void) +static void __init set_pci_cacheline_size(void) { u64 levels, unique_caches; s64 status; pal_cache_config_info_t cci; - static u8 cacheline_size; - - if (cacheline_size) - return cacheline_size; status = ia64_pal_cache_summary(&levels, &unique_caches); if (status != 0) { - printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n", - __FUNCTION__, status); - return SMP_CACHE_BYTES; + printk(KERN_ERR "%s: ia64_pal_cache_summary() failed " + "(status=%ld)\n", __FUNCTION__, status); + return; } - status = ia64_pal_cache_config_info(levels - 1, /* cache_type (data_or_unified)= */ 2, - &cci); + status = ia64_pal_cache_config_info(levels - 1, + /* cache_type (data_or_unified)= */ 2, &cci); if (status != 0) { - printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed (status=%ld)\n", - __FUNCTION__, status); - return SMP_CACHE_BYTES; + printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed " + "(status=%ld)\n", __FUNCTION__, status); + return; } - cacheline_size = 1 << cci.pcci_line_size; - return cacheline_size; + pci_cache_line_size = (1 << cci.pcci_line_size) / 4; } -/** - * pcibios_prep_mwi - helper function for drivers/pci/pci.c:pci_set_mwi() - * @dev: the PCI device for which MWI is enabled - * - * For ia64, we can get the cacheline sizes from PAL. - * - * RETURNS: An appropriate -ERRNO error value on eror, or zero for success. - */ -int -pcibios_prep_mwi (struct pci_dev *dev) -{ - unsigned long desired_linesize, current_linesize; - int rc = 0; - u8 pci_linesize; - - desired_linesize = pci_cacheline_size(); - - pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &pci_linesize); - current_linesize = 4 * pci_linesize; - if (desired_linesize != current_linesize) { - printk(KERN_WARNING "PCI: slot %s has incorrect PCI cache line size of %lu bytes,", - pci_name(dev), current_linesize); - if (current_linesize > desired_linesize) { - printk(" expected %lu bytes instead\n", desired_linesize); - rc = -EINVAL; - } else { - printk(" correcting to %lu\n", desired_linesize); - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, desired_linesize / 4); - } - } - return rc; +static int __init pcibios_init(void) +{ + set_pci_cacheline_size(); + return 0; } + +subsys_initcall(pcibios_init); diff --git a/arch/ia64/sn/kernel/Makefile b/arch/ia64/sn/kernel/Makefile index 2d78f34dd76..0a59371d347 100644 --- a/arch/ia64/sn/kernel/Makefile +++ b/arch/ia64/sn/kernel/Makefile @@ -4,13 +4,14 @@ # License. See the file "COPYING" in the main directory of this archive # for more details. # -# Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All Rights Reserved. +# Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All Rights Reserved. # CPPFLAGS += -I$(srctree)/arch/ia64/sn/include obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \ - huberror.o io_init.o iomv.o klconflib.o pio_phys.o \ + huberror.o io_acpi_init.o io_common.o \ + io_init.o iomv.o klconflib.o pio_phys.o \ sn2/ obj-$(CONFIG_IA64_GENERIC) += machvec.o obj-$(CONFIG_SGI_TIOCX) += tiocx.o diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c new file mode 100644 index 00000000000..99d7f278612 --- /dev/null +++ b/arch/ia64/sn/kernel/io_acpi_init.c @@ -0,0 +1,231 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. + */ + +#include <asm/sn/types.h> +#include <asm/sn/addrs.h> +#include <asm/sn/pcidev.h> +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/sn_sal.h> +#include "xtalk/hubdev.h" +#include <linux/acpi.h> + + +/* + * The code in this file will only be executed when running with + * a PROM that has ACPI IO support. (i.e., SN_ACPI_BASE_SUPPORT() == 1) + */ + + +/* + * This value must match the UUID the PROM uses + * (io/acpi/defblk.c) when building a vendor descriptor. + */ +struct acpi_vendor_uuid sn_uuid = { + .subtype = 0, + .data = { 0x2c, 0xc6, 0xa6, 0xfe, 0x9c, 0x44, 0xda, 0x11, + 0xa2, 0x7c, 0x08, 0x00, 0x69, 0x13, 0xea, 0x51 }, +}; + +/* + * Perform the early IO init in PROM. + */ +static s64 +sal_ioif_init(u64 *result) +{ + struct ia64_sal_retval isrv = {0,0,0,0}; + + SAL_CALL_NOLOCK(isrv, + SN_SAL_IOIF_INIT, 0, 0, 0, 0, 0, 0, 0); + *result = isrv.v0; + return isrv.status; +} + +/* + * sn_hubdev_add - The 'add' function of the acpi_sn_hubdev_driver. + * Called for every "SGIHUB" or "SGITIO" device defined + * in the ACPI namespace. + */ +static int __init +sn_hubdev_add(struct acpi_device *device) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + u64 addr; + struct hubdev_info *hubdev; + struct hubdev_info *hubdev_ptr; + int i; + u64 nasid; + struct acpi_resource *resource; + int ret = 0; + acpi_status status; + struct acpi_resource_vendor_typed *vendor; + extern void sn_common_hubdev_init(struct hubdev_info *); + + status = acpi_get_vendor_resource(device->handle, METHOD_NAME__CRS, + &sn_uuid, &buffer); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR + "sn_hubdev_add: acpi_get_vendor_resource() failed: %d\n", + status); + return 1; + } + + resource = buffer.pointer; + vendor = &resource->data.vendor_typed; + if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) != + sizeof(struct hubdev_info *)) { + printk(KERN_ERR + "sn_hubdev_add: Invalid vendor data length: %d\n", + vendor->byte_length); + ret = 1; + goto exit; + } + + memcpy(&addr, vendor->byte_data, sizeof(struct hubdev_info *)); + hubdev_ptr = __va((struct hubdev_info *) addr); + + nasid = hubdev_ptr->hdi_nasid; + i = nasid_to_cnodeid(nasid); + hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo); + *hubdev = *hubdev_ptr; + sn_common_hubdev_init(hubdev); + +exit: + kfree(buffer.pointer); + return ret; +} + +/* + * sn_get_bussoft_ptr() - The pcibus_bussoft pointer is found in + * the ACPI Vendor resource for this bus. + */ +static struct pcibus_bussoft * +sn_get_bussoft_ptr(struct pci_bus *bus) +{ + u64 addr; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_handle handle; + struct pcibus_bussoft *prom_bussoft_ptr; + struct acpi_resource *resource; + acpi_status status; + struct acpi_resource_vendor_typed *vendor; + + + handle = PCI_CONTROLLER(bus)->acpi_handle; + status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS, + &sn_uuid, &buffer); + if (ACPI_FAILURE(status)) { + printk(KERN_ERR "get_acpi_pcibus_ptr: " + "get_acpi_bussoft_info() failed: %d\n", + status); + return NULL; + } + resource = buffer.pointer; + vendor = &resource->data.vendor_typed; + + if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) != + sizeof(struct pcibus_bussoft *)) { + printk(KERN_ERR + "get_acpi_bussoft_ptr: Invalid vendor data " + "length %d\n", vendor->byte_length); + kfree(buffer.pointer); + return NULL; + } + memcpy(&addr, vendor->byte_data, sizeof(struct pcibus_bussoft *)); + prom_bussoft_ptr = __va((struct pcibus_bussoft *) addr); + kfree(buffer.pointer); + + return prom_bussoft_ptr; +} + +/* + * sn_acpi_bus_fixup + */ +void +sn_acpi_bus_fixup(struct pci_bus *bus) +{ + struct pci_dev *pci_dev = NULL; + struct pcibus_bussoft *prom_bussoft_ptr; + extern void sn_common_bus_fixup(struct pci_bus *, + struct pcibus_bussoft *); + + if (!bus->parent) { /* If root bus */ + prom_bussoft_ptr = sn_get_bussoft_ptr(bus); + if (prom_bussoft_ptr == NULL) { + printk(KERN_ERR + "sn_pci_fixup_bus: 0x%04x:0x%02x Unable to " + "obtain prom_bussoft_ptr\n", + pci_domain_nr(bus), bus->number); + return; + } + sn_common_bus_fixup(bus, prom_bussoft_ptr); + } + list_for_each_entry(pci_dev, &bus->devices, bus_list) { + sn_pci_fixup_slot(pci_dev); + } +} + +/* + * sn_acpi_slot_fixup - Perform any SN specific slot fixup. + * At present there does not appear to be + * any generic way to handle a ROM image + * that has been shadowed by the PROM, so + * we pass a pointer to it within the + * pcidev_info structure. + */ + +void +sn_acpi_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info) +{ + void __iomem *addr; + size_t size; + + if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) { + /* + * A valid ROM image exists and has been shadowed by the + * PROM. Setup the pci_dev ROM resource to point to + * the shadowed copy. + */ + size = dev->resource[PCI_ROM_RESOURCE].end - + dev->resource[PCI_ROM_RESOURCE].start; + addr = + ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE], + size); + dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr; + dev->resource[PCI_ROM_RESOURCE].end = + (unsigned long) addr + size; + dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY; + } +} + +static struct acpi_driver acpi_sn_hubdev_driver = { + .name = "SGI HUBDEV Driver", + .ids = "SGIHUB,SGITIO", + .ops = { + .add = sn_hubdev_add, + }, +}; + + +/* + * sn_io_acpi_init - PROM has ACPI support for IO, defining at a minimum the + * nodes and root buses in the DSDT. As a result, bus scanning + * will be initiated by the Linux ACPI code. + */ + +void __init +sn_io_acpi_init(void) +{ + u64 result; + s64 status; + + acpi_bus_register_driver(&acpi_sn_hubdev_driver); + status = sal_ioif_init(&result); + if (status || result) + panic("sal_ioif_init failed: [%lx] %s\n", + status, ia64_sal_strerror(status)); +} diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c new file mode 100644 index 00000000000..d4dd8f4b6b8 --- /dev/null +++ b/arch/ia64/sn/kernel/io_common.c @@ -0,0 +1,613 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. + */ + +#include <linux/bootmem.h> +#include <asm/sn/types.h> +#include <asm/sn/addrs.h> +#include <asm/sn/sn_feature_sets.h> +#include <asm/sn/geo.h> +#include <asm/sn/io.h> +#include <asm/sn/l1.h> +#include <asm/sn/module.h> +#include <asm/sn/pcibr_provider.h> +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/pcidev.h> +#include <asm/sn/simulator.h> +#include <asm/sn/sn_sal.h> +#include <asm/sn/tioca_provider.h> +#include <asm/sn/tioce_provider.h> +#include "xtalk/hubdev.h" +#include "xtalk/xwidgetdev.h" +#include <linux/acpi.h> +#include <asm/sn/sn2/sn_hwperf.h> +#include <asm/sn/acpi.h> + +extern void sn_init_cpei_timer(void); +extern void register_sn_procfs(void); +extern void sn_acpi_bus_fixup(struct pci_bus *); +extern void sn_bus_fixup(struct pci_bus *); +extern void sn_acpi_slot_fixup(struct pci_dev *, struct pcidev_info *); +extern void sn_more_slot_fixup(struct pci_dev *, struct pcidev_info *); +extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64); +extern void sn_io_acpi_init(void); +extern void sn_io_init(void); + + +static struct list_head sn_sysdata_list; + +/* sysdata list struct */ +struct sysdata_el { + struct list_head entry; + void *sysdata; +}; + +int sn_ioif_inited; /* SN I/O infrastructure initialized? */ + +struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ + +/* + * Hooks and struct for unsupported pci providers + */ + +static dma_addr_t +sn_default_pci_map(struct pci_dev *pdev, unsigned long paddr, size_t size, int type) +{ + return 0; +} + +static void +sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction) +{ + return; +} + +static void * +sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller) +{ + return NULL; +} + +static struct sn_pcibus_provider sn_pci_default_provider = { + .dma_map = sn_default_pci_map, + .dma_map_consistent = sn_default_pci_map, + .dma_unmap = sn_default_pci_unmap, + .bus_fixup = sn_default_pci_bus_fixup, +}; + +/* + * Retrieve the DMA Flush List given nasid, widget, and device. + * This list is needed to implement the WAR - Flush DMA data on PIO Reads. + */ +static inline u64 +sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num, + u64 address) +{ + struct ia64_sal_retval ret_stuff; + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + SAL_CALL_NOLOCK(ret_stuff, + (u64) SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST, + (u64) nasid, (u64) widget_num, + (u64) device_num, (u64) address, 0, 0, 0); + return ret_stuff.status; +} + +/* + * Retrieve the pci device information given the bus and device|function number. + */ +static inline u64 +sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, + u64 sn_irq_info) +{ + struct ia64_sal_retval ret_stuff; + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + SAL_CALL_NOLOCK(ret_stuff, + (u64) SN_SAL_IOIF_GET_PCIDEV_INFO, + (u64) segment, (u64) bus_number, (u64) devfn, + (u64) pci_dev, + sn_irq_info, 0, 0); + return ret_stuff.v0; +} + +/* + * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified + * device. + */ +inline struct pcidev_info * +sn_pcidev_info_get(struct pci_dev *dev) +{ + struct pcidev_info *pcidev; + + list_for_each_entry(pcidev, + &(SN_PLATFORM_DATA(dev)->pcidev_info), pdi_list) { + if (pcidev->pdi_linux_pcidev == dev) + return pcidev; + } + return NULL; +} + +/* Older PROM flush WAR + * + * 01/16/06 -- This war will be in place until a new official PROM is released. + * Additionally note that the struct sn_flush_device_war also has to be + * removed from arch/ia64/sn/include/xtalk/hubdev.h + */ +static u8 war_implemented = 0; + +static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device, + struct sn_flush_device_common *common) +{ + struct sn_flush_device_war *war_list; + struct sn_flush_device_war *dev_entry; + struct ia64_sal_retval isrv = {0,0,0,0}; + + if (!war_implemented) { + printk(KERN_WARNING "PROM version < 4.50 -- implementing old " + "PROM flush WAR\n"); + war_implemented = 1; + } + + war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL); + if (!war_list) + BUG(); + + SAL_CALL_NOLOCK(isrv, SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST, + nasid, widget, __pa(war_list), 0, 0, 0 ,0); + if (isrv.status) + panic("sn_device_fixup_war failed: %s\n", + ia64_sal_strerror(isrv.status)); + + dev_entry = war_list + device; + memcpy(common,dev_entry, sizeof(*common)); + kfree(war_list); + + return isrv.status; +} + +/* + * sn_common_hubdev_init() - This routine is called to initialize the HUB data + * structure for each node in the system. + */ +void __init +sn_common_hubdev_init(struct hubdev_info *hubdev) +{ + + struct sn_flush_device_kernel *sn_flush_device_kernel; + struct sn_flush_device_kernel *dev_entry; + s64 status; + int widget, device, size; + + /* Attach the error interrupt handlers */ + if (hubdev->hdi_nasid & 1) /* If TIO */ + ice_error_init(hubdev); + else + hub_error_init(hubdev); + + for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) + hubdev->hdi_xwidget_info[widget].xwi_hubinfo = hubdev; + + if (!hubdev->hdi_flush_nasid_list.widget_p) + return; + + size = (HUB_WIDGET_ID_MAX + 1) * + sizeof(struct sn_flush_device_kernel *); + hubdev->hdi_flush_nasid_list.widget_p = + kzalloc(size, GFP_KERNEL); + if (!hubdev->hdi_flush_nasid_list.widget_p) + BUG(); + + for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) { + size = DEV_PER_WIDGET * + sizeof(struct sn_flush_device_kernel); + sn_flush_device_kernel = kzalloc(size, GFP_KERNEL); + if (!sn_flush_device_kernel) + BUG(); + + dev_entry = sn_flush_device_kernel; + for (device = 0; device < DEV_PER_WIDGET; + device++, dev_entry++) { + size = sizeof(struct sn_flush_device_common); + dev_entry->common = kzalloc(size, GFP_KERNEL); + if (!dev_entry->common) + BUG(); + if (sn_prom_feature_available(PRF_DEVICE_FLUSH_LIST)) + status = sal_get_device_dmaflush_list( + hubdev->hdi_nasid, widget, device, + (u64)(dev_entry->common)); + else + status = sn_device_fixup_war(hubdev->hdi_nasid, + widget, device, + dev_entry->common); + if (status != SALRET_OK) + panic("SAL call failed: %s\n", + ia64_sal_strerror(status)); + + spin_lock_init(&dev_entry->sfdl_flush_lock); + } + + if (sn_flush_device_kernel) + hubdev->hdi_flush_nasid_list.widget_p[widget] = + sn_flush_device_kernel; + } +} + +void sn_pci_unfixup_slot(struct pci_dev *dev) +{ + struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev; + + sn_irq_unfixup(dev); + pci_dev_put(host_pci_dev); + pci_dev_put(dev); +} + +/* + * sn_pci_fixup_slot() - This routine sets up a slot's resources consistent + * with the Linux PCI abstraction layer. Resources + * acquired from our PCI provider include PIO maps + * to BAR space and interrupt objects. + */ +void sn_pci_fixup_slot(struct pci_dev *dev) +{ + int segment = pci_domain_nr(dev->bus); + int status = 0; + struct pcibus_bussoft *bs; + struct pci_bus *host_pci_bus; + struct pci_dev *host_pci_dev; + struct pcidev_info *pcidev_info; + struct sn_irq_info *sn_irq_info; + unsigned int bus_no, devfn; + + pci_dev_get(dev); /* for the sysdata pointer */ + pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); + if (!pcidev_info) + BUG(); /* Cannot afford to run out of memory */ + + sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); + if (!sn_irq_info) + BUG(); /* Cannot afford to run out of memory */ + + /* Call to retrieve pci device information needed by kernel. */ + status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, + dev->devfn, + (u64) __pa(pcidev_info), + (u64) __pa(sn_irq_info)); + if (status) + BUG(); /* Cannot get platform pci device information */ + + /* Add pcidev_info to list in pci_controller.platform_data */ + list_add_tail(&pcidev_info->pdi_list, + &(SN_PLATFORM_DATA(dev->bus)->pcidev_info)); + + if (SN_ACPI_BASE_SUPPORT()) + sn_acpi_slot_fixup(dev, pcidev_info); + else + sn_more_slot_fixup(dev, pcidev_info); + /* + * Using the PROMs values for the PCI host bus, get the Linux + * PCI host_pci_dev struct and set up host bus linkages + */ + + bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff; + devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff; + host_pci_bus = pci_find_bus(segment, bus_no); + host_pci_dev = pci_get_slot(host_pci_bus, devfn); + + pcidev_info->host_pci_dev = host_pci_dev; + pcidev_info->pdi_linux_pcidev = dev; + pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev); + bs = SN_PCIBUS_BUSSOFT(dev->bus); + pcidev_info->pdi_pcibus_info = bs; + + if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) { + SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type]; + } else { + SN_PCIDEV_BUSPROVIDER(dev) = &sn_pci_default_provider; + } + + /* Only set up IRQ stuff if this device has a host bus context */ + if (bs && sn_irq_info->irq_irq) { + pcidev_info->pdi_sn_irq_info = sn_irq_info; + dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq; + sn_irq_fixup(dev, sn_irq_info); + } else { + pcidev_info->pdi_sn_irq_info = NULL; + kfree(sn_irq_info); + } +} + +/* + * sn_common_bus_fixup - Perform platform specific bus fixup. + * Execute the ASIC specific fixup routine + * for this bus. + */ +void +sn_common_bus_fixup(struct pci_bus *bus, + struct pcibus_bussoft *prom_bussoft_ptr) +{ + int cnode; + struct pci_controller *controller; + struct hubdev_info *hubdev_info; + int nasid; + void *provider_soft; + struct sn_pcibus_provider *provider; + struct sn_platform_data *sn_platform_data; + + controller = PCI_CONTROLLER(bus); + /* + * Per-provider fixup. Copies the bus soft structure from prom + * to local area and links SN_PCIBUS_BUSSOFT(). + */ + + if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) { + printk(KERN_WARNING "sn_common_bus_fixup: Unsupported asic type, %d", + prom_bussoft_ptr->bs_asic_type); + return; + } + + if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB) + return; /* no further fixup necessary */ + + provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type]; + if (provider == NULL) + panic("sn_common_bus_fixup: No provider registered for this asic type, %d", + prom_bussoft_ptr->bs_asic_type); + + if (provider->bus_fixup) + provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, + controller); + else + provider_soft = NULL; + + /* + * Generic bus fixup goes here. Don't reference prom_bussoft_ptr + * after this point. + */ + controller->platform_data = kzalloc(sizeof(struct sn_platform_data), + GFP_KERNEL); + if (controller->platform_data == NULL) + BUG(); + sn_platform_data = + (struct sn_platform_data *) controller->platform_data; + sn_platform_data->provider_soft = provider_soft; + INIT_LIST_HEAD(&((struct sn_platform_data *) + controller->platform_data)->pcidev_info); + nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base); + cnode = nasid_to_cnodeid(nasid); + hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); + SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info = + &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]); + + /* + * If the node information we obtained during the fixup phase is + * invalid then set controller->node to -1 (undetermined) + */ + if (controller->node >= num_online_nodes()) { + struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus); + + printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u" + "L_IO=%lx L_MEM=%lx BASE=%lx\n", + b->bs_asic_type, b->bs_xid, b->bs_persist_busnum, + b->bs_legacy_io, b->bs_legacy_mem, b->bs_base); + printk(KERN_WARNING "on node %d but only %d nodes online." + "Association set to undetermined.\n", + controller->node, num_online_nodes()); + controller->node = -1; + } +} + +void sn_bus_store_sysdata(struct pci_dev *dev) +{ + struct sysdata_el *element; + + element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL); + if (!element) { + dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); + return; + } + element->sysdata = SN_PCIDEV_INFO(dev); + list_add(&element->entry, &sn_sysdata_list); +} + +void sn_bus_free_sysdata(void) +{ + struct sysdata_el *element; + struct list_head *list, *safe; + + list_for_each_safe(list, safe, &sn_sysdata_list) { + element = list_entry(list, struct sysdata_el, entry); + list_del(&element->entry); + list_del(&(((struct pcidev_info *) + (element->sysdata))->pdi_list)); + kfree(element->sysdata); + kfree(element); + } + return; +} + +/* + * hubdev_init_node() - Creates the HUB data structure and link them to it's + * own NODE specific data area. + */ +void hubdev_init_node(nodepda_t * npda, cnodeid_t node) +{ + struct hubdev_info *hubdev_info; + int size; + pg_data_t *pg; + + size = sizeof(struct hubdev_info); + + if (node >= num_online_nodes()) /* Headless/memless IO nodes */ + pg = NODE_DATA(0); + else + pg = NODE_DATA(node); + + hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size); + + npda->pdinfo = (void *)hubdev_info; +} + +geoid_t +cnodeid_get_geoid(cnodeid_t cnode) +{ + struct hubdev_info *hubdev; + + hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); + return hubdev->hdi_geoid; +} + +void sn_generate_path(struct pci_bus *pci_bus, char *address) +{ + nasid_t nasid; + cnodeid_t cnode; + geoid_t geoid; + moduleid_t moduleid; + u16 bricktype; + + nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); + cnode = nasid_to_cnodeid(nasid); + geoid = cnodeid_get_geoid(cnode); + moduleid = geo_module(geoid); + + sprintf(address, "module_%c%c%c%c%.2d", + '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)), + '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)), + '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)), + MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid)); + + /* Tollhouse requires slot id to be displayed */ + bricktype = MODULE_GET_BTYPE(moduleid); + if ((bricktype == L1_BRICKTYPE_191010) || + (bricktype == L1_BRICKTYPE_1932)) + sprintf(address, "%s^%d", address, geo_slot(geoid)); +} + +/* + * sn_pci_fixup_bus() - Perform SN specific setup of software structs + * (pcibus_bussoft, pcidev_info) and hardware + * registers, for the specified bus and devices under it. + */ +void __devinit +sn_pci_fixup_bus(struct pci_bus *bus) +{ + + if (SN_ACPI_BASE_SUPPORT()) + sn_acpi_bus_fixup(bus); + else + sn_bus_fixup(bus); +} + +/* + * sn_io_early_init - Perform early IO (and some non-IO) initialization. + * In particular, setup the sn_pci_provider[] array. + * This needs to be done prior to any bus scanning + * (acpi_scan_init()) in the ACPI case, as the SN + * bus fixup code will reference the array. + */ +static int __init +sn_io_early_init(void) +{ + int i; + + if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) + return 0; + + /* + * prime sn_pci_provider[]. Individial provider init routines will + * override their respective default entries. + */ + + for (i = 0; i < PCIIO_ASIC_MAX_TYPES; i++) + sn_pci_provider[i] = &sn_pci_default_provider; + + pcibr_init_provider(); + tioca_init_provider(); + tioce_init_provider(); + + /* + * This is needed to avoid bounce limit checks in the blk layer + */ + ia64_max_iommu_merge_mask = ~PAGE_MASK; + + sn_irq_lh_init(); + INIT_LIST_HEAD(&sn_sysdata_list); + sn_init_cpei_timer(); + +#ifdef CONFIG_PROC_FS + register_sn_procfs(); +#endif + + printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n", + acpi_gbl_DSDT->oem_revision); + if (SN_ACPI_BASE_SUPPORT()) + sn_io_acpi_init(); + else + sn_io_init(); + return 0; +} + +arch_initcall(sn_io_early_init); + +/* + * sn_io_late_init() - Perform any final platform specific IO initialization. + */ + +int __init +sn_io_late_init(void) +{ + struct pci_bus *bus; + struct pcibus_bussoft *bussoft; + cnodeid_t cnode; + nasid_t nasid; + cnodeid_t near_cnode; + + if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) + return 0; + + /* + * Setup closest node in pci_controller->node for + * PIC, TIOCP, TIOCE (TIOCA does it during bus fixup using + * info from the PROM). + */ + bus = NULL; + while ((bus = pci_find_next_bus(bus)) != NULL) { + bussoft = SN_PCIBUS_BUSSOFT(bus); + nasid = NASID_GET(bussoft->bs_base); + cnode = nasid_to_cnodeid(nasid); + if ((bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) || + (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCE)) { + /* TIO PCI Bridge: find nearest node with CPUs */ + int e = sn_hwperf_get_nearest_node(cnode, NULL, + &near_cnode); + if (e < 0) { + near_cnode = (cnodeid_t)-1; /* use any node */ + printk(KERN_WARNING "pcibr_bus_fixup: failed " + "to find near node with CPUs to TIO " + "node %d, err=%d\n", cnode, e); + } + PCI_CONTROLLER(bus)->node = near_cnode; + } else if (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_PIC) { + PCI_CONTROLLER(bus)->node = cnode; + } + } + + sn_ioif_inited = 1; /* SN I/O infrastructure now initialized */ + + return 0; +} + +fs_initcall(sn_io_late_init); + +EXPORT_SYMBOL(sn_pci_fixup_slot); +EXPORT_SYMBOL(sn_pci_unfixup_slot); +EXPORT_SYMBOL(sn_bus_store_sysdata); +EXPORT_SYMBOL(sn_bus_free_sysdata); +EXPORT_SYMBOL(sn_generate_path); + diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index dc09a6a28a3..9ad843e0383 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -3,103 +3,28 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. */ -#include <linux/bootmem.h> -#include <linux/nodemask.h> #include <asm/sn/types.h> #include <asm/sn/addrs.h> -#include <asm/sn/sn_feature_sets.h> -#include <asm/sn/geo.h> #include <asm/sn/io.h> -#include <asm/sn/l1.h> #include <asm/sn/module.h> -#include <asm/sn/pcibr_provider.h> +#include <asm/sn/intr.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> -#include <asm/sn/simulator.h> #include <asm/sn/sn_sal.h> -#include <asm/sn/tioca_provider.h> -#include <asm/sn/tioce_provider.h> #include "xtalk/hubdev.h" -#include "xtalk/xwidgetdev.h" - - -extern void sn_init_cpei_timer(void); -extern void register_sn_procfs(void); - -static struct list_head sn_sysdata_list; - -/* sysdata list struct */ -struct sysdata_el { - struct list_head entry; - void *sysdata; -}; - -struct slab_info { - struct hubdev_info hubdev; -}; - -struct brick { - moduleid_t id; /* Module ID of this module */ - struct slab_info slab_info[MAX_SLABS + 1]; -}; - -int sn_ioif_inited; /* SN I/O infrastructure initialized? */ - -struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */ - -static int max_segment_number; /* Default highest segment number */ -static int max_pcibus_number = 255; /* Default highest pci bus number */ /* - * Hooks and struct for unsupported pci providers + * The code in this file will only be executed when running with + * a PROM that does _not_ have base ACPI IO support. + * (i.e., SN_ACPI_BASE_SUPPORT() == 0) */ -static dma_addr_t -sn_default_pci_map(struct pci_dev *pdev, unsigned long paddr, size_t size, int type) -{ - return 0; -} - -static void -sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction) -{ - return; -} - -static void * -sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller) -{ - return NULL; -} - -static struct sn_pcibus_provider sn_pci_default_provider = { - .dma_map = sn_default_pci_map, - .dma_map_consistent = sn_default_pci_map, - .dma_unmap = sn_default_pci_unmap, - .bus_fixup = sn_default_pci_bus_fixup, -}; - -/* - * Retrieve the DMA Flush List given nasid, widget, and device. - * This list is needed to implement the WAR - Flush DMA data on PIO Reads. - */ -static inline u64 -sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num, - u64 address) -{ - struct ia64_sal_retval ret_stuff; - ret_stuff.status = 0; - ret_stuff.v0 = 0; +static int max_segment_number; /* Default highest segment number */ +static int max_pcibus_number = 255; /* Default highest pci bus number */ - SAL_CALL_NOLOCK(ret_stuff, - (u64) SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST, - (u64) nasid, (u64) widget_num, - (u64) device_num, (u64) address, 0, 0, 0); - return ret_stuff.status; -} /* * Retrieve the hub device info structure for the given nasid. @@ -131,93 +56,20 @@ static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address) return ret_stuff.v0; } -/* - * Retrieve the pci device information given the bus and device|function number. - */ -static inline u64 -sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev, - u64 sn_irq_info) -{ - struct ia64_sal_retval ret_stuff; - ret_stuff.status = 0; - ret_stuff.v0 = 0; - - SAL_CALL_NOLOCK(ret_stuff, - (u64) SN_SAL_IOIF_GET_PCIDEV_INFO, - (u64) segment, (u64) bus_number, (u64) devfn, - (u64) pci_dev, - sn_irq_info, 0, 0); - return ret_stuff.v0; -} - -/* - * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified - * device. - */ -inline struct pcidev_info * -sn_pcidev_info_get(struct pci_dev *dev) -{ - struct pcidev_info *pcidev; - - list_for_each_entry(pcidev, - &(SN_PCI_CONTROLLER(dev)->pcidev_info), pdi_list) { - if (pcidev->pdi_linux_pcidev == dev) { - return pcidev; - } - } - return NULL; -} - -/* Older PROM flush WAR - * - * 01/16/06 -- This war will be in place until a new official PROM is released. - * Additionally note that the struct sn_flush_device_war also has to be - * removed from arch/ia64/sn/include/xtalk/hubdev.h - */ -static u8 war_implemented = 0; - -static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device, - struct sn_flush_device_common *common) -{ - struct sn_flush_device_war *war_list; - struct sn_flush_device_war *dev_entry; - struct ia64_sal_retval isrv = {0,0,0,0}; - - if (!war_implemented) { - printk(KERN_WARNING "PROM version < 4.50 -- implementing old " - "PROM flush WAR\n"); - war_implemented = 1; - } - - war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL); - if (!war_list) - BUG(); - - SAL_CALL_NOLOCK(isrv, SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST, - nasid, widget, __pa(war_list), 0, 0, 0 ,0); - if (isrv.status) - panic("sn_device_fixup_war failed: %s\n", - ia64_sal_strerror(isrv.status)); - - dev_entry = war_list + device; - memcpy(common,dev_entry, sizeof(*common)); - kfree(war_list); - - return isrv.status; -} /* - * sn_fixup_ionodes() - This routine initializes the HUB data strcuture for - * each node in the system. + * sn_fixup_ionodes() - This routine initializes the HUB data structure for + * each node in the system. This function is only + * executed when running with a non-ACPI capable PROM. */ static void __init sn_fixup_ionodes(void) { - struct sn_flush_device_kernel *sn_flush_device_kernel; - struct sn_flush_device_kernel *dev_entry; + struct hubdev_info *hubdev; u64 status; u64 nasid; - int i, widget, device, size; + int i; + extern void sn_common_hubdev_init(struct hubdev_info *); /* * Get SGI Specific HUB chipset information. @@ -240,70 +92,47 @@ static void __init sn_fixup_ionodes(void) max_segment_number = hubdev->max_segment_number; max_pcibus_number = hubdev->max_pcibus_number; } + sn_common_hubdev_init(hubdev); + } +} - /* Attach the error interrupt handlers */ - if (nasid & 1) - ice_error_init(hubdev); - else - hub_error_init(hubdev); - - for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) - hubdev->hdi_xwidget_info[widget].xwi_hubinfo = hubdev; - - if (!hubdev->hdi_flush_nasid_list.widget_p) - continue; - - size = (HUB_WIDGET_ID_MAX + 1) * - sizeof(struct sn_flush_device_kernel *); - hubdev->hdi_flush_nasid_list.widget_p = - kzalloc(size, GFP_KERNEL); - if (!hubdev->hdi_flush_nasid_list.widget_p) +/* + * sn_pci_legacy_window_fixup - Create PCI controller windows for + * legacy IO and MEM space. This needs to + * be done here, as the PROM does not have + * ACPI support defining the root buses + * and their resources (_CRS), + */ +static void +sn_legacy_pci_window_fixup(struct pci_controller *controller, + u64 legacy_io, u64 legacy_mem) +{ + controller->window = kcalloc(2, sizeof(struct pci_window), + GFP_KERNEL); + if (controller->window == NULL) BUG(); - - for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) { - size = DEV_PER_WIDGET * - sizeof(struct sn_flush_device_kernel); - sn_flush_device_kernel = kzalloc(size, GFP_KERNEL); - if (!sn_flush_device_kernel) - BUG(); - - dev_entry = sn_flush_device_kernel; - for (device = 0; device < DEV_PER_WIDGET; - device++,dev_entry++) { - size = sizeof(struct sn_flush_device_common); - dev_entry->common = kzalloc(size, GFP_KERNEL); - if (!dev_entry->common) - BUG(); - - if (sn_prom_feature_available( - PRF_DEVICE_FLUSH_LIST)) - status = sal_get_device_dmaflush_list( - nasid, widget, device, - (u64)(dev_entry->common)); - else - status = sn_device_fixup_war(nasid, - widget, device, - dev_entry->common); - if (status != SALRET_OK) - panic("SAL call failed: %s\n", - ia64_sal_strerror(status)); - - spin_lock_init(&dev_entry->sfdl_flush_lock); - } - - if (sn_flush_device_kernel) - hubdev->hdi_flush_nasid_list.widget_p[widget] = - sn_flush_device_kernel; - } - } + controller->window[0].offset = legacy_io; + controller->window[0].resource.name = "legacy_io"; + controller->window[0].resource.flags = IORESOURCE_IO; + controller->window[0].resource.start = legacy_io; + controller->window[0].resource.end = + controller->window[0].resource.start + 0xffff; + controller->window[0].resource.parent = &ioport_resource; + controller->window[1].offset = legacy_mem; + controller->window[1].resource.name = "legacy_mem"; + controller->window[1].resource.flags = IORESOURCE_MEM; + controller->window[1].resource.start = legacy_mem; + controller->window[1].resource.end = + controller->window[1].resource.start + (1024 * 1024) - 1; + controller->window[1].resource.parent = &iomem_resource; + controller->windows = 2; } /* * sn_pci_window_fixup() - Create a pci_window for each device resource. - * Until ACPI support is added, we need this code - * to setup pci_windows for use by - * pcibios_bus_to_resource(), - * pcibios_resource_to_bus(), etc. + * It will setup pci_windows for use by + * pcibios_bus_to_resource(), pcibios_resource_to_bus(), + * etc. */ static void sn_pci_window_fixup(struct pci_dev *dev, unsigned int count, @@ -342,60 +171,22 @@ sn_pci_window_fixup(struct pci_dev *dev, unsigned int count, controller->window = new_window; } -void sn_pci_unfixup_slot(struct pci_dev *dev) -{ - struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev; - - sn_irq_unfixup(dev); - pci_dev_put(host_pci_dev); - pci_dev_put(dev); -} - /* - * sn_pci_fixup_slot() - This routine sets up a slot's resources - * consistent with the Linux PCI abstraction layer. Resources acquired - * from our PCI provider include PIO maps to BAR space and interrupt - * objects. + * sn_more_slot_fixup() - We are not running with an ACPI capable PROM, + * and need to convert the pci_dev->resource + * 'start' and 'end' addresses to mapped addresses, + * and setup the pci_controller->window array entries. */ -void sn_pci_fixup_slot(struct pci_dev *dev) +void +sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info) { unsigned int count = 0; int idx; - int segment = pci_domain_nr(dev->bus); - int status = 0; - struct pcibus_bussoft *bs; - struct pci_bus *host_pci_bus; - struct pci_dev *host_pci_dev; - struct pcidev_info *pcidev_info; s64 pci_addrs[PCI_ROM_RESOURCE + 1]; - struct sn_irq_info *sn_irq_info; - unsigned long size; - unsigned int bus_no, devfn; - - pci_dev_get(dev); /* for the sysdata pointer */ - pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL); - if (!pcidev_info) - BUG(); /* Cannot afford to run out of memory */ - - sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL); - if (!sn_irq_info) - BUG(); /* Cannot afford to run out of memory */ - - /* Call to retrieve pci device information needed by kernel. */ - status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number, - dev->devfn, - (u64) __pa(pcidev_info), - (u64) __pa(sn_irq_info)); - if (status) - BUG(); /* Cannot get platform pci device information */ - - /* Add pcidev_info to list in sn_pci_controller struct */ - list_add_tail(&pcidev_info->pdi_list, - &(SN_PCI_CONTROLLER(dev->bus)->pcidev_info)); + unsigned long addr, end, size, start; /* Copy over PIO Mapped Addresses */ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { - unsigned long start, end, addr; if (!pcidev_info->pdi_pio_mapped_addr[idx]) { pci_addrs[idx] = -1; @@ -419,60 +210,28 @@ void sn_pci_fixup_slot(struct pci_dev *dev) dev->resource[idx].parent = &ioport_resource; else dev->resource[idx].parent = &iomem_resource; + /* If ROM, mark as shadowed in PROM */ + if (idx == PCI_ROM_RESOURCE) + dev->resource[idx].flags |= IORESOURCE_ROM_BIOS_COPY; } /* Create a pci_window in the pci_controller struct for * each device resource. */ if (count > 0) sn_pci_window_fixup(dev, count, pci_addrs); - - /* - * Using the PROMs values for the PCI host bus, get the Linux - * PCI host_pci_dev struct and set up host bus linkages - */ - - bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff; - devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff; - host_pci_bus = pci_find_bus(segment, bus_no); - host_pci_dev = pci_get_slot(host_pci_bus, devfn); - - pcidev_info->host_pci_dev = host_pci_dev; - pcidev_info->pdi_linux_pcidev = dev; - pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev); - bs = SN_PCIBUS_BUSSOFT(dev->bus); - pcidev_info->pdi_pcibus_info = bs; - - if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) { - SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type]; - } else { - SN_PCIDEV_BUSPROVIDER(dev) = &sn_pci_default_provider; - } - - /* Only set up IRQ stuff if this device has a host bus context */ - if (bs && sn_irq_info->irq_irq) { - pcidev_info->pdi_sn_irq_info = sn_irq_info; - dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq; - sn_irq_fixup(dev, sn_irq_info); - } else { - pcidev_info->pdi_sn_irq_info = NULL; - kfree(sn_irq_info); - } } /* * sn_pci_controller_fixup() - This routine sets up a bus's resources - * consistent with the Linux PCI abstraction layer. + * consistent with the Linux PCI abstraction layer. */ -void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) +static void +sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) { - int status; - int nasid, cnode; + s64 status = 0; struct pci_controller *controller; - struct sn_pci_controller *sn_controller; struct pcibus_bussoft *prom_bussoft_ptr; - struct hubdev_info *hubdev_info; - void *provider_soft; - struct sn_pcibus_provider *provider; + status = sal_get_pcibus_info((u64) segment, (u64) busnum, (u64) ia64_tpa(&prom_bussoft_ptr)); @@ -480,261 +239,77 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus) return; /*bus # does not exist */ prom_bussoft_ptr = __va(prom_bussoft_ptr); - /* Allocate a sn_pci_controller, which has a pci_controller struct - * as the first member. - */ - sn_controller = kzalloc(sizeof(struct sn_pci_controller), GFP_KERNEL); - if (!sn_controller) + controller = kzalloc(sizeof(*controller), GFP_KERNEL); + if (!controller) BUG(); - INIT_LIST_HEAD(&sn_controller->pcidev_info); - controller = &sn_controller->pci_controller; controller->segment = segment; - if (bus == NULL) { - bus = pci_scan_bus(busnum, &pci_root_ops, controller); - if (bus == NULL) - goto error_return; /* error, or bus already scanned */ - bus->sysdata = NULL; - } - - if (bus->sysdata) - goto error_return; /* sysdata already alloc'd */ - /* - * Per-provider fixup. Copies the contents from prom to local - * area and links SN_PCIBUS_BUSSOFT(). + * Temporarily save the prom_bussoft_ptr for use by sn_bus_fixup(). + * (platform_data will be overwritten later in sn_common_bus_fixup()) */ + controller->platform_data = prom_bussoft_ptr; - if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) - goto error_return; /* unsupported asic type */ - - if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB) - goto error_return; /* no further fixup necessary */ - - provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type]; - if (provider == NULL) - goto error_return; /* no provider registerd for this asic */ + bus = pci_scan_bus(busnum, &pci_root_ops, controller); + if (bus == NULL) + goto error_return; /* error, or bus already scanned */ bus->sysdata = controller; - if (provider->bus_fixup) - provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller); - else - provider_soft = NULL; - - if (provider_soft == NULL) { - /* fixup failed or not applicable */ - bus->sysdata = NULL; - goto error_return; - } - - /* - * Setup pci_windows for legacy IO and MEM space. - * (Temporary until ACPI support is in place.) - */ - controller->window = kcalloc(2, sizeof(struct pci_window), GFP_KERNEL); - if (controller->window == NULL) - BUG(); - controller->window[0].offset = prom_bussoft_ptr->bs_legacy_io; - controller->window[0].resource.name = "legacy_io"; - controller->window[0].resource.flags = IORESOURCE_IO; - controller->window[0].resource.start = prom_bussoft_ptr->bs_legacy_io; - controller->window[0].resource.end = - controller->window[0].resource.start + 0xffff; - controller->window[0].resource.parent = &ioport_resource; - controller->window[1].offset = prom_bussoft_ptr->bs_legacy_mem; - controller->window[1].resource.name = "legacy_mem"; - controller->window[1].resource.flags = IORESOURCE_MEM; - controller->window[1].resource.start = prom_bussoft_ptr->bs_legacy_mem; - controller->window[1].resource.end = - controller->window[1].resource.start + (1024 * 1024) - 1; - controller->window[1].resource.parent = &iomem_resource; - controller->windows = 2; - - /* - * Generic bus fixup goes here. Don't reference prom_bussoft_ptr - * after this point. - */ - - PCI_CONTROLLER(bus)->platform_data = provider_soft; - nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base); - cnode = nasid_to_cnodeid(nasid); - hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); - SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info = - &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]); - /* - * If the node information we obtained during the fixup phase is invalid - * then set controller->node to -1 (undetermined) - */ - if (controller->node >= num_online_nodes()) { - struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus); - - printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u" - "L_IO=%lx L_MEM=%lx BASE=%lx\n", - b->bs_asic_type, b->bs_xid, b->bs_persist_busnum, - b->bs_legacy_io, b->bs_legacy_mem, b->bs_base); - printk(KERN_WARNING "on node %d but only %d nodes online." - "Association set to undetermined.\n", - controller->node, num_online_nodes()); - controller->node = -1; - } return; error_return: - kfree(sn_controller); + kfree(controller); return; } -void sn_bus_store_sysdata(struct pci_dev *dev) +/* + * sn_bus_fixup + */ +void +sn_bus_fixup(struct pci_bus *bus) { - struct sysdata_el *element; - - element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL); - if (!element) { - dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); - return; - } - element->sysdata = SN_PCIDEV_INFO(dev); - list_add(&element->entry, &sn_sysdata_list); -} + struct pci_dev *pci_dev = NULL; + struct pcibus_bussoft *prom_bussoft_ptr; + extern void sn_common_bus_fixup(struct pci_bus *, + struct pcibus_bussoft *); + + + if (!bus->parent) { /* If root bus */ + prom_bussoft_ptr = PCI_CONTROLLER(bus)->platform_data; + if (prom_bussoft_ptr == NULL) { + printk(KERN_ERR + "sn_bus_fixup: 0x%04x:0x%02x Unable to " + "obtain prom_bussoft_ptr\n", + pci_domain_nr(bus), bus->number); + return; + } + sn_common_bus_fixup(bus, prom_bussoft_ptr); + sn_legacy_pci_window_fixup(PCI_CONTROLLER(bus), + prom_bussoft_ptr->bs_legacy_io, + prom_bussoft_ptr->bs_legacy_mem); + } + list_for_each_entry(pci_dev, &bus->devices, bus_list) { + sn_pci_fixup_slot(pci_dev); + } -void sn_bus_free_sysdata(void) -{ - struct sysdata_el *element; - struct list_head *list, *safe; - - list_for_each_safe(list, safe, &sn_sysdata_list) { - element = list_entry(list, struct sysdata_el, entry); - list_del(&element->entry); - list_del(&(((struct pcidev_info *) - (element->sysdata))->pdi_list)); - kfree(element->sysdata); - kfree(element); - } - return; } /* - * Ugly hack to get PCI setup until we have a proper ACPI namespace. + * sn_io_init - PROM does not have ACPI support to define nodes or root buses, + * so we need to do things the hard way, including initiating the + * bus scanning ourselves. */ -#define PCI_BUSES_TO_SCAN 256 - -static int __init sn_pci_init(void) +void __init sn_io_init(void) { int i, j; - struct pci_dev *pci_dev = NULL; - - if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM()) - return 0; - - /* - * prime sn_pci_provider[]. Individial provider init routines will - * override their respective default entries. - */ - - for (i = 0; i < PCIIO_ASIC_MAX_TYPES; i++) - sn_pci_provider[i] = &sn_pci_default_provider; - pcibr_init_provider(); - tioca_init_provider(); - tioce_init_provider(); - - /* - * This is needed to avoid bounce limit checks in the blk layer - */ - ia64_max_iommu_merge_mask = ~PAGE_MASK; sn_fixup_ionodes(); - sn_irq_lh_init(); - INIT_LIST_HEAD(&sn_sysdata_list); - sn_init_cpei_timer(); - -#ifdef CONFIG_PROC_FS - register_sn_procfs(); -#endif /* busses are not known yet ... */ for (i = 0; i <= max_segment_number; i++) for (j = 0; j <= max_pcibus_number; j++) sn_pci_controller_fixup(i, j, NULL); - - /* - * Generic Linux PCI Layer has created the pci_bus and pci_dev - * structures - time for us to add our SN PLatform specific - * information. - */ - - while ((pci_dev = - pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL) - sn_pci_fixup_slot(pci_dev); - - sn_ioif_inited = 1; /* sn I/O infrastructure now initialized */ - - return 0; -} - -/* - * hubdev_init_node() - Creates the HUB data structure and link them to it's - * own NODE specific data area. - */ -void hubdev_init_node(nodepda_t * npda, cnodeid_t node) -{ - struct hubdev_info *hubdev_info; - int size; - pg_data_t *pg; - - size = sizeof(struct hubdev_info); - - if (node >= num_online_nodes()) /* Headless/memless IO nodes */ - pg = NODE_DATA(0); - else - pg = NODE_DATA(node); - - hubdev_info = (struct hubdev_info *)alloc_bootmem_node(pg, size); - - npda->pdinfo = (void *)hubdev_info; } - -geoid_t -cnodeid_get_geoid(cnodeid_t cnode) -{ - struct hubdev_info *hubdev; - - hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo); - return hubdev->hdi_geoid; -} - -void sn_generate_path(struct pci_bus *pci_bus, char *address) -{ - nasid_t nasid; - cnodeid_t cnode; - geoid_t geoid; - moduleid_t moduleid; - u16 bricktype; - - nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base); - cnode = nasid_to_cnodeid(nasid); - geoid = cnodeid_get_geoid(cnode); - moduleid = geo_module(geoid); - - sprintf(address, "module_%c%c%c%c%.2d", - '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)), - '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)), - '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)), - MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid)); - - /* Tollhouse requires slot id to be displayed */ - bricktype = MODULE_GET_BTYPE(moduleid); - if ((bricktype == L1_BRICKTYPE_191010) || - (bricktype == L1_BRICKTYPE_1932)) - sprintf(address, "%s^%d", address, geo_slot(geoid)); -} - -subsys_initcall(sn_pci_init); -EXPORT_SYMBOL(sn_pci_fixup_slot); -EXPORT_SYMBOL(sn_pci_unfixup_slot); -EXPORT_SYMBOL(sn_pci_controller_fixup); -EXPORT_SYMBOL(sn_bus_store_sysdata); -EXPORT_SYMBOL(sn_bus_free_sysdata); -EXPORT_SYMBOL(sn_generate_path); diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c index 7ce3cdad627..4aa4f301d56 100644 --- a/arch/ia64/sn/kernel/iomv.c +++ b/arch/ia64/sn/kernel/iomv.c @@ -3,10 +3,11 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2000-2003 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2000-2003, 2006 Silicon Graphics, Inc. All rights reserved. */ #include <linux/module.h> +#include <linux/acpi.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/vga.h> @@ -15,6 +16,7 @@ #include <asm/sn/pda.h> #include <asm/sn/sn_cpuid.h> #include <asm/sn/shub_mmr.h> +#include <asm/sn/acpi.h> #define IS_LEGACY_VGA_IOPORT(p) \ (((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df)) @@ -31,11 +33,14 @@ void *sn_io_addr(unsigned long port) { if (!IS_RUNNING_ON_SIMULATOR()) { if (IS_LEGACY_VGA_IOPORT(port)) - port += vga_console_iobase; + return (__ia64_mk_io_addr(port)); /* On sn2, legacy I/O ports don't point at anything */ if (port < (64 * 1024)) return NULL; - return ((void *)(port | __IA64_UNCACHED_OFFSET)); + if (SN_ACPI_BASE_SUPPORT()) + return (__ia64_mk_io_addr(port)); + else + return ((void *)(port | __IA64_UNCACHED_OFFSET)); } else { /* but the simulator uses them... */ unsigned long addr; diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 7a2d824c5ce..1d009f93244 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -388,6 +388,14 @@ void __init sn_setup(char **cmdline_p) ia64_sn_plat_set_error_handling_features(); // obsolete ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV); ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES); + /* + * Note: The calls to notify the PROM of ACPI and PCI Segment + * support must be done prior to acpi_load_tables(), as + * an ACPI capable PROM will rebuild the DSDT as result + * of the call. + */ + ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE); + ia64_sn_set_os_feature(OSF_ACPI_ENABLE); #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) @@ -413,6 +421,16 @@ void __init sn_setup(char **cmdline_p) if (! vga_console_membase) sn_scan_pcdp(); + /* + * Setup legacy IO space. + * vga_console_iobase maps to PCI IO Space address 0 on the + * bus containing the VGA console. + */ + if (vga_console_iobase) { + io_space[0].mmio_base = vga_console_iobase; + io_space[0].sparse = 0; + } + if (vga_console_membase) { /* usable vga ... make tty0 the preferred default console */ if (!strstr(*cmdline_p, "console=")) diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index feaf1a6e810..493380b2c05 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -552,7 +552,7 @@ static void __exit tiocx_exit(void) bus_unregister(&tiocx_bus_type); } -subsys_initcall(tiocx_init); +fs_initcall(tiocx_init); module_exit(tiocx_exit); /************************************************************************ diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c index 27dd7df0f44..6846dc9b432 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2001-2004, 2006 Silicon Graphics, Inc. All rights reserved. */ #include <linux/interrupt.h> @@ -109,7 +109,6 @@ void * pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { int nasid, cnode, j; - cnodeid_t near_cnode; struct hubdev_info *hubdev_info; struct pcibus_info *soft; struct sn_flush_device_kernel *sn_flush_device_kernel; @@ -186,20 +185,6 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont return NULL; } - if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) { - /* TIO PCI Bridge: find nearest node with CPUs */ - int e = sn_hwperf_get_nearest_node(cnode, NULL, &near_cnode); - - if (e < 0) { - near_cnode = (cnodeid_t)-1; /* use any node */ - printk(KERN_WARNING "pcibr_bus_fixup: failed to find " - "near node with CPUs to TIO node %d, err=%d\n", - cnode, e); - } - controller->node = near_cnode; - } - else - controller->node = cnode; return soft; } diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 46e16dcf597..35f854fb612 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -15,7 +15,6 @@ #include <asm/sn/pcidev.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/tioce_provider.h> -#include <asm/sn/sn2/sn_hwperf.h> /* * 1/26/2006 @@ -990,8 +989,6 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) static void * tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) { - int my_nasid; - cnodeid_t my_cnode, mem_cnode; struct tioce_common *tioce_common; struct tioce_kernel *tioce_kern; struct tioce __iomem *tioce_mmr; @@ -1035,21 +1032,6 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont tioce_common->ce_pcibus.bs_persist_segment, tioce_common->ce_pcibus.bs_persist_busnum); - /* - * identify closest nasid for memory allocations - */ - - my_nasid = NASID_GET(tioce_common->ce_pcibus.bs_base); - my_cnode = nasid_to_cnodeid(my_nasid); - - if (sn_hwperf_get_nearest_node(my_cnode, &mem_cnode, NULL) < 0) { - printk(KERN_WARNING "tioce_bus_fixup: failed to find " - "closest node with MEM to TIO node %d\n", my_cnode); - mem_cnode = (cnodeid_t)-1; /* use any node */ - } - - controller->node = mem_cnode; - return tioce_common; } diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 9923adc5248..257dc906846 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -48,7 +48,6 @@ static struct pci_controller *u3_ht; static int has_second_ohare; #endif /* CONFIG_PPC64 */ -extern u8 pci_cache_line_size; extern int pcibios_assign_bus_offset; struct device_node *k2_skiplist[2]; diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index e02f01b644a..dfc41cd4bb5 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -646,13 +646,4 @@ int pci_domain_nr(struct pci_bus *pbus) } EXPORT_SYMBOL(pci_domain_nr); -int pcibios_prep_mwi(struct pci_dev *dev) -{ - /* We set correct PCI_CACHE_LINE_SIZE register values for every - * device probed on this platform. So there is nothing to check - * and this always succeeds. - */ - return 0; -} - #endif /* !(CONFIG_PCI) */ diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 510816c16da..04bee524e31 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -125,6 +125,7 @@ config I2C_I801 ICH7 ESB2 ICH8 + ICH9 This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index bbb2fbee836..c7be2fdbd86 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -33,6 +33,7 @@ ICH7 27DA ESB2 269B ICH8 283E + ICH9 2930 This driver supports several versions of Intel's I/O Controller Hubs (ICH). For SMBus support, they are similar to the PIIX4 and are part of Intel's '810' and other chipsets. @@ -457,6 +458,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) }, { 0, } }; diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c index 62f1ac08332..8287f95c8c4 100644 --- a/drivers/message/i2o/pci.c +++ b/drivers/message/i2o/pci.c @@ -320,7 +320,6 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, struct i2o_controller *c; int rc; struct pci_dev *i960 = NULL; - int enabled = pdev->is_enabled; printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n"); @@ -330,12 +329,11 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, return -ENODEV; } - if (!enabled) - if ((rc = pci_enable_device(pdev))) { - printk(KERN_WARNING "i2o: couldn't enable device %s\n", - pci_name(pdev)); - return rc; - } + if ((rc = pci_enable_device(pdev))) { + printk(KERN_WARNING "i2o: couldn't enable device %s\n", + pci_name(pdev)); + return rc; + } if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "i2o: no suitable DMA found for %s\n", @@ -442,8 +440,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, i2o_iop_free(c); disable: - if (!enabled) - pci_disable_device(pdev); + pci_disable_device(pdev); return rc; } diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 3cfb0a3575e..f1dd81a1d59 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -19,7 +19,7 @@ config PCI_MSI config PCI_MULTITHREAD_PROBE bool "PCI Multi-threaded probe (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL && BROKEN + depends on PCI && EXPERIMENTAL help Say Y here if you want the PCI core to spawn a new thread for every PCI device that is probed. This can cause a huge diff --git a/drivers/pci/access.c b/drivers/pci/access.c index ea16805a153..73a58c73d52 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -1,6 +1,7 @@ #include <linux/pci.h> #include <linux/module.h> #include <linux/ioport.h> +#include <linux/wait.h> #include "pci.h" @@ -63,30 +64,42 @@ EXPORT_SYMBOL(pci_bus_write_config_byte); EXPORT_SYMBOL(pci_bus_write_config_word); EXPORT_SYMBOL(pci_bus_write_config_dword); -static u32 pci_user_cached_config(struct pci_dev *dev, int pos) -{ - u32 data; +/* + * The following routines are to prevent the user from accessing PCI config + * space when it's unsafe to do so. Some devices require this during BIST and + * we're required to prevent it during D-state transitions. + * + * We have a bit per device to indicate it's blocked and a global wait queue + * for callers to sleep on until devices are unblocked. + */ +static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait); - data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])]; - data >>= (pos % sizeof(dev->saved_config_space[0])) * 8; - return data; +static noinline void pci_wait_ucfg(struct pci_dev *dev) +{ + DECLARE_WAITQUEUE(wait, current); + + __add_wait_queue(&pci_ucfg_wait, &wait); + do { + set_current_state(TASK_UNINTERRUPTIBLE); + spin_unlock_irq(&pci_lock); + schedule(); + spin_lock_irq(&pci_lock); + } while (dev->block_ucfg_access); + __remove_wait_queue(&pci_ucfg_wait, &wait); } #define PCI_USER_READ_CONFIG(size,type) \ int pci_user_read_config_##size \ (struct pci_dev *dev, int pos, type *val) \ { \ - unsigned long flags; \ int ret = 0; \ u32 data = -1; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ - spin_lock_irqsave(&pci_lock, flags); \ - if (likely(!dev->block_ucfg_access)) \ - ret = dev->bus->ops->read(dev->bus, dev->devfn, \ + spin_lock_irq(&pci_lock); \ + if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ + ret = dev->bus->ops->read(dev->bus, dev->devfn, \ pos, sizeof(type), &data); \ - else if (pos < sizeof(dev->saved_config_space)) \ - data = pci_user_cached_config(dev, pos); \ - spin_unlock_irqrestore(&pci_lock, flags); \ + spin_unlock_irq(&pci_lock); \ *val = (type)data; \ return ret; \ } @@ -95,14 +108,13 @@ int pci_user_read_config_##size \ int pci_user_write_config_##size \ (struct pci_dev *dev, int pos, type val) \ { \ - unsigned long flags; \ int ret = -EIO; \ if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \ - spin_lock_irqsave(&pci_lock, flags); \ - if (likely(!dev->block_ucfg_access)) \ - ret = dev->bus->ops->write(dev->bus, dev->devfn, \ + spin_lock_irq(&pci_lock); \ + if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \ + ret = dev->bus->ops->write(dev->bus, dev->devfn, \ pos, sizeof(type), val); \ - spin_unlock_irqrestore(&pci_lock, flags); \ + spin_unlock_irq(&pci_lock); \ return ret; \ } @@ -117,21 +129,23 @@ PCI_USER_WRITE_CONFIG(dword, u32) * pci_block_user_cfg_access - Block userspace PCI config reads/writes * @dev: pci device struct * - * This function blocks any userspace PCI config accesses from occurring. - * When blocked, any writes will be bit bucketed and reads will return the - * data saved using pci_save_state for the first 64 bytes of config - * space and return 0xff for all other config reads. - **/ + * When user access is blocked, any reads or writes to config space will + * sleep until access is unblocked again. We don't allow nesting of + * block/unblock calls. + */ void pci_block_user_cfg_access(struct pci_dev *dev) { unsigned long flags; + int was_blocked; - pci_save_state(dev); - - /* spinlock to synchronize with anyone reading config space now */ spin_lock_irqsave(&pci_lock, flags); + was_blocked = dev->block_ucfg_access; dev->block_ucfg_access = 1; spin_unlock_irqrestore(&pci_lock, flags); + + /* If we BUG() inside the pci_lock, we're guaranteed to hose + * the machine */ + BUG_ON(was_blocked); } EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); @@ -140,14 +154,19 @@ EXPORT_SYMBOL_GPL(pci_block_user_cfg_access); * @dev: pci device struct * * This function allows userspace PCI config accesses to resume. - **/ + */ void pci_unblock_user_cfg_access(struct pci_dev *dev) { unsigned long flags; - /* spinlock to synchronize with anyone reading saved config space */ spin_lock_irqsave(&pci_lock, flags); + + /* This indicates a problem in the caller, but we don't need + * to kill them, unlike a double-block above. */ + WARN_ON(!dev->block_ucfg_access); + dev->block_ucfg_access = 0; + wake_up_all(&pci_ucfg_wait); spin_unlock_irqrestore(&pci_lock, flags); } EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access); diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 59c5b242d86..ddbadd95387 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -62,10 +62,10 @@ struct acpiphp_slot; struct slot { struct hotplug_slot *hotplug_slot; struct acpiphp_slot *acpi_slot; + struct hotplug_slot_info info; + char name[SLOT_NAME_SIZE]; }; - - /** * struct acpiphp_bridge - PCI bridge information * diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index c57d9d5ce84..40c79b03c7e 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -303,25 +303,15 @@ static int __init init_acpi(void) /* read initial number of slots */ if (!retval) { num_slots = acpiphp_get_num_slots(); - if (num_slots == 0) + if (num_slots == 0) { + acpiphp_glue_exit(); retval = -ENODEV; + } } return retval; } - -/** - * make_slot_name - make a slot name that appears in pcihpfs - * @slot: slot to name - * - */ -static void make_slot_name(struct slot *slot) -{ - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%u", - slot->acpi_slot->sun); -} - /** * release_slot - free up the memory used by a slot * @hotplug_slot: slot to free @@ -332,8 +322,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); - kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); kfree(slot); } @@ -342,26 +330,19 @@ static void release_slot(struct hotplug_slot *hotplug_slot) int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) { struct slot *slot; - struct hotplug_slot *hotplug_slot; - struct hotplug_slot_info *hotplug_slot_info; int retval = -ENOMEM; slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) goto error; - slot->hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL); + slot->hotplug_slot = kzalloc(sizeof(*slot->hotplug_slot), GFP_KERNEL); if (!slot->hotplug_slot) goto error_slot; - slot->hotplug_slot->info = kzalloc(sizeof(*hotplug_slot_info), - GFP_KERNEL); - if (!slot->hotplug_slot->info) - goto error_hpslot; + slot->hotplug_slot->info = &slot->info; - slot->hotplug_slot->name = kzalloc(SLOT_NAME_SIZE, GFP_KERNEL); - if (!slot->hotplug_slot->name) - goto error_info; + slot->hotplug_slot->name = slot->name; slot->hotplug_slot->private = slot; slot->hotplug_slot->release = &release_slot; @@ -376,21 +357,17 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - make_slot_name(slot); + snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot); if (retval) { err("pci_hp_register failed with error %d\n", retval); - goto error_name; + goto error_hpslot; } info("Slot [%s] registered\n", slot->hotplug_slot->name); return 0; -error_name: - kfree(slot->hotplug_slot->name); -error_info: - kfree(slot->hotplug_slot->info); error_hpslot: kfree(slot->hotplug_slot); error_slot: diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 16167b01626..0b9d0db1590 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -1693,14 +1693,10 @@ void __exit acpiphp_glue_exit(void) */ int __init acpiphp_get_num_slots(void) { - struct list_head *node; struct acpiphp_bridge *bridge; - int num_slots; - - num_slots = 0; + int num_slots = 0; - list_for_each (node, &bridge_list) { - bridge = (struct acpiphp_bridge *)node; + list_for_each_entry (bridge, &bridge_list, list) { dbg("Bus %04x:%02x has %d slot%s\n", pci_domain_nr(bridge->pci_bus), bridge->pci_bus->number, bridge->nr_slots, diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c index d87a9e3eaee..d8f05d7a3c7 100644 --- a/drivers/pci/hotplug/ibmphp_pci.c +++ b/drivers/pci/hotplug/ibmphp_pci.c @@ -1371,12 +1371,12 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function) } bus = ibmphp_find_res_bus (sec_number); - debug ("bus->busno is %x\n", bus->busno); - debug ("sec_number is %x\n", sec_number); if (!bus) { err ("cannot find Bus structure for the bridged device\n"); return -EINVAL; } + debug("bus->busno is %x\n", bus->busno); + debug("sec_number is %x\n", sec_number); ibmphp_remove_bus (bus, busno); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index f93e81e2d2c..f13f31323e8 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -521,14 +521,9 @@ static void __exit unload_pciehpd(void) } -static int hpdriver_context = 0; - static void pciehp_remove (struct pcie_device *device) { - printk("%s ENTRY\n", __FUNCTION__); - printk("%s -> Call free_irq for irq = %d\n", - __FUNCTION__, device->irq); - free_irq(device->irq, &hpdriver_context); + /* XXX - Needs to be adapted to device driver model */ } #ifdef CONFIG_PM diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 1c551c697c3..6d3f580f266 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -718,8 +718,6 @@ static void hpc_release_ctlr(struct controller *ctrl) if (php_ctlr->irq) { free_irq(php_ctlr->irq, ctrl); php_ctlr->irq = 0; - if (!pcie_mch_quirk) - pci_disable_msi(php_ctlr->pci_dev); } } if (php_ctlr->pci_dev) diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index 46825fee3ae..72383467a0d 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -63,7 +63,7 @@ static struct device_node *find_php_slot_pci_node(char *drc_name, char *type; int rc; - while ((np = of_find_node_by_type(np, "pci"))) { + while ((np = of_find_node_by_name(np, "pci"))) { rc = rpaphp_get_drc_props(np, NULL, &name, &type, NULL); if (rc == 0) if (!strcmp(drc_name, name) && !strcmp(drc_type, type)) diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c index 141486df235..71a2cb8baa4 100644 --- a/drivers/pci/hotplug/rpaphp_core.c +++ b/drivers/pci/hotplug/rpaphp_core.c @@ -356,7 +356,7 @@ static int __init rpaphp_init(void) info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); init_MUTEX(&rpaphp_sem); - while ((dn = of_find_node_by_type(dn, "pci"))) + while ((dn = of_find_node_by_name(dn, "pci"))) rpaphp_add_slot(dn); return 0; diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index b62ad31a973..5d188c55838 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -205,21 +205,6 @@ static struct hotplug_slot * sn_hp_destroy(void) return bss_hotplug_slot; } -static void sn_bus_alloc_data(struct pci_dev *dev) -{ - struct pci_bus *subordinate_bus; - struct pci_dev *child; - - sn_pci_fixup_slot(dev); - - /* Recursively sets up the sn_irq_info structs */ - if (dev->subordinate) { - subordinate_bus = dev->subordinate; - list_for_each_entry(child, &subordinate_bus->devices, bus_list) - sn_bus_alloc_data(child); - } -} - static void sn_bus_free_data(struct pci_dev *dev) { struct pci_bus *subordinate_bus; @@ -337,6 +322,11 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot, return rc; } +/* + * Power up and configure the slot via a SAL call to PROM. + * Scan slot (and any children), do any platform specific fixup, + * and find device driver. + */ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) { struct slot *slot = bss_hotplug_slot->private; @@ -345,6 +335,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) int func, num_funcs; int new_ppb = 0; int rc; + void pcibios_fixup_device_resources(struct pci_dev *); /* Serialize the Linux PCI infrastructure */ mutex_lock(&sn_hotplug_mutex); @@ -367,9 +358,6 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) return -ENODEV; } - sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus), - slot->pci_bus->number, - slot->pci_bus); /* * Map SN resources for all functions on the card * to the Linux PCI interface and tell the drivers @@ -380,6 +368,13 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) PCI_DEVFN(slot->device_num + 1, PCI_FUNC(func))); if (dev) { + /* Need to do slot fixup on PPB before fixup of children + * (PPB's pcidev_info needs to be in pcidev_info list + * before child's SN_PCIDEV_INFO() call to setup + * pdi_host_pcidev_info). + */ + pcibios_fixup_device_resources(dev); + sn_pci_fixup_slot(dev); if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { unsigned char sec_bus; pci_read_config_byte(dev, PCI_SECONDARY_BUS, @@ -387,12 +382,8 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot) new_bus = pci_add_new_bus(dev->bus, dev, sec_bus); pci_scan_child_bus(new_bus); - sn_pci_controller_fixup(pci_domain_nr(new_bus), - new_bus->number, - new_bus); new_ppb = 1; } - sn_bus_alloc_data(dev); pci_dev_put(dev); } } diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h index f0cca1772f9..3898f523714 100644 --- a/drivers/pci/msi.h +++ b/drivers/pci/msi.h @@ -6,14 +6,6 @@ #ifndef MSI_H #define MSI_H -/* - * MSI-X Address Register - */ -#define PCI_MSIX_FLAGS_QSIZE 0x7FF -#define PCI_MSIX_FLAGS_ENABLE (1 << 15) -#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) -#define PCI_MSIX_FLAGS_BITMASK (1 << 0) - #define PCI_MSIX_ENTRY_SIZE 16 #define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0 #define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4 diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index bb7456c1dba..a064f36a080 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -36,6 +36,7 @@ acpi_query_osc ( struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *out_obj; u32 osc_dw0; + acpi_status *ret_status = (acpi_status *)retval; /* Setting up input parameters */ @@ -56,6 +57,7 @@ acpi_query_osc ( if (ACPI_FAILURE (status)) { printk(KERN_DEBUG "Evaluate _OSC Set fails. Status = 0x%04x\n", status); + *ret_status = status; return status; } out_obj = output.pointer; @@ -90,6 +92,7 @@ acpi_query_osc ( query_osc_out: kfree(output.pointer); + *ret_status = status; return status; } @@ -166,6 +169,7 @@ run_osc_out: acpi_status pci_osc_support_set(u32 flags) { u32 temp; + acpi_status retval; if (!(flags & OSC_SUPPORT_MASKS)) { return AE_TYPE; @@ -179,9 +183,13 @@ acpi_status pci_osc_support_set(u32 flags) acpi_get_devices ( PCI_ROOT_HID_STRING, acpi_query_osc, ctrlset_buf, - NULL ); + (void **) &retval ); ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE; ctrlset_buf[OSC_CONTROL_TYPE] = temp; + if (ACPI_FAILURE(retval)) { + /* no osc support at all */ + ctrlset_buf[OSC_SUPPORT_TYPE] = 0; + } return AE_OK; } EXPORT_SYMBOL(pci_osc_support_set); diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 194f1d21d3d..e5ae3a0c13b 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -329,8 +329,8 @@ static int pci_default_resume(struct pci_dev *pci_dev) /* restore the PCI config space */ pci_restore_state(pci_dev); /* if the device was enabled before suspend, reenable */ - if (pci_dev->is_enabled) - retval = pci_enable_device(pci_dev); + if (atomic_read(&pci_dev->enable_cnt)) + retval = __pci_enable_device(pci_dev); /* if the device was busmaster before the suspend, make it busmaster again */ if (pci_dev->is_busmaster) pci_set_master(pci_dev); @@ -445,9 +445,12 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner) /* register with core */ error = driver_register(&drv->driver); + if (error) + return error; - if (!error) - error = pci_create_newid_file(drv); + error = pci_create_newid_file(drv); + if (error) + driver_unregister(&drv->driver); return error; } diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index f952bfea48a..7a94076752d 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -42,7 +42,6 @@ pci_config_attr(subsystem_vendor, "0x%04x\n"); pci_config_attr(subsystem_device, "0x%04x\n"); pci_config_attr(class, "0x%06x\n"); pci_config_attr(irq, "%u\n"); -pci_config_attr(is_enabled, "%u\n"); static ssize_t broken_parity_status_show(struct device *dev, struct device_attribute *attr, @@ -112,26 +111,36 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8), (u8)(pci_dev->class)); } -static ssize_t -is_enabled_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) + +static ssize_t is_enabled_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) { + ssize_t result = -EINVAL; struct pci_dev *pdev = to_pci_dev(dev); - int retval = 0; /* this can crash the machine when done on the "wrong" device */ if (!capable(CAP_SYS_ADMIN)) return count; - if (*buf == '0') - pci_disable_device(pdev); + if (*buf == '0') { + if (atomic_read(&pdev->enable_cnt) != 0) + pci_disable_device(pdev); + else + result = -EIO; + } else if (*buf == '1') + result = pci_enable_device(pdev); + + return result < 0 ? result : count; +} - if (*buf == '1') - retval = pci_enable_device(pdev); +static ssize_t is_enabled_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct pci_dev *pdev; - if (retval) - return retval; - return count; + pdev = to_pci_dev (dev); + return sprintf (buf, "%u\n", atomic_read(&pdev->enable_cnt)); } static ssize_t diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a544997399b..5a14b73cf3a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -490,6 +490,47 @@ static void pci_restore_pcie_state(struct pci_dev *dev) kfree(save_state); } + +static int pci_save_pcix_state(struct pci_dev *dev) +{ + int pos, i = 0; + struct pci_cap_saved_state *save_state; + u16 *cap; + + pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (pos <= 0) + return 0; + + save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL); + if (!save_state) { + dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n"); + return -ENOMEM; + } + cap = (u16 *)&save_state->data[0]; + + pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]); + pci_add_saved_cap(dev, save_state); + return 0; +} + +static void pci_restore_pcix_state(struct pci_dev *dev) +{ + int i = 0, pos; + struct pci_cap_saved_state *save_state; + u16 *cap; + + save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX); + pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); + if (!save_state || pos <= 0) + return; + cap = (u16 *)&save_state->data[0]; + + pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]); + pci_remove_saved_cap(save_state); + kfree(save_state); +} + + /** * pci_save_state - save the PCI configuration space of a device before suspending * @dev: - PCI device that we're dealing with @@ -507,6 +548,8 @@ pci_save_state(struct pci_dev *dev) return i; if ((i = pci_save_pcie_state(dev)) != 0) return i; + if ((i = pci_save_pcix_state(dev)) != 0) + return i; return 0; } @@ -538,6 +581,7 @@ pci_restore_state(struct pci_dev *dev) dev->saved_config_space[i]); } } + pci_restore_pcix_state(dev); pci_restore_msi_state(dev); pci_restore_msix_state(dev); return 0; @@ -568,30 +612,51 @@ pci_enable_device_bars(struct pci_dev *dev, int bars) } /** - * pci_enable_device - Initialize device before it's used by a driver. + * __pci_enable_device - Initialize device before it's used by a driver. * @dev: PCI device to be initialized * * Initialize device before it's used by a driver. Ask low-level code * to enable I/O and memory. Wake up the device if it was suspended. * Beware, this function can fail. + * + * Note this function is a backend and is not supposed to be called by + * normal code, use pci_enable_device() instead. */ int -pci_enable_device(struct pci_dev *dev) +__pci_enable_device(struct pci_dev *dev) { int err; - if (dev->is_enabled) - return 0; - err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1); if (err) return err; pci_fixup_device(pci_fixup_enable, dev); - dev->is_enabled = 1; return 0; } /** + * pci_enable_device - Initialize device before it's used by a driver. + * @dev: PCI device to be initialized + * + * Initialize device before it's used by a driver. Ask low-level code + * to enable I/O and memory. Wake up the device if it was suspended. + * Beware, this function can fail. + * + * Note we don't actually enable the device many times if we call + * this function repeatedly (we just increment the count). + */ +int pci_enable_device(struct pci_dev *dev) +{ + int result; + if (atomic_add_return(1, &dev->enable_cnt) > 1) + return 0; /* already enabled */ + result = __pci_enable_device(dev); + if (result < 0) + atomic_dec(&dev->enable_cnt); + return result; +} + +/** * pcibios_disable_device - disable arch specific PCI resources for device dev * @dev: the PCI device to disable * @@ -607,12 +672,18 @@ void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {} * * Signal to the system that the PCI device is not in use by the system * anymore. This only involves disabling PCI bus-mastering, if active. + * + * Note we don't actually disable the device until all callers of + * pci_device_enable() have called pci_device_disable(). */ void pci_disable_device(struct pci_dev *dev) { u16 pci_command; + if (atomic_sub_return(1, &dev->enable_cnt) != 0) + return; + if (dev->msi_enabled) disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI), PCI_CAP_ID_MSI); @@ -628,7 +699,6 @@ pci_disable_device(struct pci_dev *dev) dev->is_busmaster = 0; pcibios_disable_device(dev); - dev->is_enabled = 0; } /** @@ -831,22 +901,38 @@ pci_set_master(struct pci_dev *dev) pcibios_set_master(dev); } -#ifndef HAVE_ARCH_PCI_MWI +#ifdef PCI_DISABLE_MWI +int pci_set_mwi(struct pci_dev *dev) +{ + return 0; +} + +void pci_clear_mwi(struct pci_dev *dev) +{ +} + +#else + +#ifndef PCI_CACHE_LINE_BYTES +#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES +#endif + /* This can be overridden by arch code. */ -u8 pci_cache_line_size = L1_CACHE_BYTES >> 2; +/* Don't forget this is measured in 32-bit words, not bytes */ +u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4; /** - * pci_generic_prep_mwi - helper function for pci_set_mwi - * @dev: the PCI device for which MWI is enabled + * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed + * @dev: the PCI device for which MWI is to be enabled * - * Helper function for generic implementation of pcibios_prep_mwi - * function. Originally copied from drivers/net/acenic.c. + * Helper function for pci_set_mwi. + * Originally copied from drivers/net/acenic.c. * Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>. * * RETURNS: An appropriate -ERRNO error value on error, or zero for success. */ static int -pci_generic_prep_mwi(struct pci_dev *dev) +pci_set_cacheline_size(struct pci_dev *dev) { u8 cacheline_size; @@ -872,7 +958,6 @@ pci_generic_prep_mwi(struct pci_dev *dev) return -EINVAL; } -#endif /* !HAVE_ARCH_PCI_MWI */ /** * pci_set_mwi - enables memory-write-invalidate PCI transaction @@ -890,12 +975,7 @@ pci_set_mwi(struct pci_dev *dev) int rc; u16 cmd; -#ifdef HAVE_ARCH_PCI_MWI - rc = pcibios_prep_mwi(dev); -#else - rc = pci_generic_prep_mwi(dev); -#endif - + rc = pci_set_cacheline_size(dev); if (rc) return rc; @@ -926,6 +1006,7 @@ pci_clear_mwi(struct pci_dev *dev) pci_write_config_word(dev, PCI_COMMAND, cmd); } } +#endif /* ! PCI_DISABLE_MWI */ /** * pci_intx - enables/disables PCI INTx for device dev diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 6bf327db5c5..398852f526a 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -1,5 +1,6 @@ /* Functions internal to the PCI core code */ +extern int __must_check __pci_enable_device(struct pci_dev *); extern int pci_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size); extern int pci_create_sysfs_dev_files(struct pci_dev *pdev); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e159d660449..0eeac60042b 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -679,6 +679,33 @@ static int pci_setup_device(struct pci_dev * dev) pci_read_bases(dev, 6, PCI_ROM_ADDRESS); pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor); pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device); + + /* + * Do the ugly legacy mode stuff here rather than broken chip + * quirk code. Legacy mode ATA controllers have fixed + * addresses. These are not always echoed in BAR0-3, and + * BAR0-3 in a few cases contain junk! + */ + if (class == PCI_CLASS_STORAGE_IDE) { + u8 progif; + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 1) == 0) { + dev->resource[0].start = 0x1F0; + dev->resource[0].end = 0x1F7; + dev->resource[0].flags = IORESOURCE_IO; + dev->resource[1].start = 0x3F6; + dev->resource[1].end = 0x3F6; + dev->resource[1].flags = IORESOURCE_IO; + } + if ((progif & 4) == 0) { + dev->resource[2].start = 0x170; + dev->resource[2].end = 0x177; + dev->resource[2].flags = IORESOURCE_IO; + dev->resource[3].start = 0x376; + dev->resource[3].end = 0x376; + dev->resource[3].flags = IORESOURCE_IO; + } + } break; case PCI_HEADER_TYPE_BRIDGE: /* bridge header */ diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5b448381169..9ca9b9bf616 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -797,56 +797,6 @@ static void __init quirk_mediagx_master(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master ); /* - * As per PCI spec, ignore base address registers 0-3 of the IDE controllers - * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and - * secondary channels respectively). If the device reports Compatible mode - * but does use BAR0-3 for address decoding, we assume that firmware has - * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374). - * Exceptions (if they exist) must be handled in chip/architecture specific - * fixups. - * - * Note: for non x86 people. You may need an arch specific quirk to handle - * moving IDE devices to native mode as well. Some plug in card devices power - * up in compatible mode and assume the BIOS will adjust them. - * - * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as - * we do now ? We don't want is pci_enable_device to come along - * and assign new resources. Both approaches work for that. - */ -static void __devinit quirk_ide_bases(struct pci_dev *dev) -{ - struct resource *res; - int first_bar = 2, last_bar = 0; - - if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - - res = &dev->resource[0]; - - /* primary channel: ProgIf bit 0, BAR0, BAR1 */ - if (!(dev->class & 1) && (res[0].flags || res[1].flags)) { - res[0].start = res[0].end = res[0].flags = 0; - res[1].start = res[1].end = res[1].flags = 0; - first_bar = 0; - last_bar = 1; - } - - /* secondary channel: ProgIf bit 2, BAR2, BAR3 */ - if (!(dev->class & 4) && (res[2].flags || res[3].flags)) { - res[2].start = res[2].end = res[2].flags = 0; - res[3].start = res[3].end = res[3].flags = 0; - last_bar = 3; - } - - if (!last_bar) - return; - - printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n", - first_bar, last_bar, pci_name(dev)); -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases); - -/* * Ensure C0 rev restreaming is off. This is normally done by * the BIOS but in the odd case it is not the results are corruption * hence the presence of a Linux check @@ -880,11 +830,10 @@ static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) prog &= ~5; pdev->class &= ~5; pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); - /* need to re-assign BARs for compat mode */ - quirk_ide_bases(pdev); + /* PCI layer will sort out resources */ } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide ); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide ); /* * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same @@ -900,11 +849,9 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev) prog &= ~5; pdev->class &= ~5; pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); - /* need to re-assign BARs for compat mode */ - quirk_ide_bases(pdev); } } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index e1dcefc69bb..d087e081771 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -81,7 +81,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) start = (loff_t)0xC0000; *size = 0x20000; /* cover C000:0 through E000:0 */ } else { - if (res->flags & IORESOURCE_ROM_COPY) { + if (res->flags & + (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) { *size = pci_resource_len(pdev, PCI_ROM_RESOURCE); return (void __iomem *)(unsigned long) pci_resource_start(pdev, PCI_ROM_RESOURCE); @@ -165,7 +166,8 @@ void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size) if (!rom) return NULL; - if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW)) + if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW | + IORESOURCE_ROM_BIOS_COPY)) return rom; res->start = (unsigned long)kmalloc(*size, GFP_KERNEL); @@ -191,7 +193,7 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom) { struct resource *res = &pdev->resource[PCI_ROM_RESOURCE]; - if (res->flags & IORESOURCE_ROM_COPY) + if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) return; iounmap(rom); @@ -215,6 +217,7 @@ void pci_remove_rom(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr); if (!(res->flags & (IORESOURCE_ROM_ENABLE | IORESOURCE_ROM_SHADOW | + IORESOURCE_ROM_BIOS_COPY | IORESOURCE_ROM_COPY))) pci_disable_rom(pdev); } diff --git a/include/asm-ia64/io.h b/include/asm-ia64/io.h index 855c30af72a..6311e168cd3 100644 --- a/include/asm-ia64/io.h +++ b/include/asm-ia64/io.h @@ -32,7 +32,7 @@ */ #define IO_SPACE_LIMIT 0xffffffffffffffffUL -#define MAX_IO_SPACES_BITS 4 +#define MAX_IO_SPACES_BITS 8 #define MAX_IO_SPACES (1UL << MAX_IO_SPACES_BITS) #define IO_SPACE_BITS 24 #define IO_SPACE_SIZE (1UL << IO_SPACE_BITS) diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h index 7ffbddf5306..8f784f8e45b 100644 --- a/include/asm-ia64/machvec.h +++ b/include/asm-ia64/machvec.h @@ -36,6 +36,7 @@ typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val, typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val, u8 size); typedef void ia64_mv_migrate_t(struct task_struct * task); +typedef void ia64_mv_pci_fixup_bus_t (struct pci_bus *); /* DMA-mapping interface: */ typedef void ia64_mv_dma_init (void); @@ -95,6 +96,11 @@ machvec_noop_task (struct task_struct *task) { } +static inline void +machvec_noop_bus (struct pci_bus *bus) +{ +} + extern void machvec_setup (char **); extern void machvec_timer_interrupt (int, void *); extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int); @@ -159,6 +165,7 @@ extern void machvec_tlb_migrate_finish (struct mm_struct *); # define platform_migrate ia64_mv.migrate # define platform_setup_msi_irq ia64_mv.setup_msi_irq # define platform_teardown_msi_irq ia64_mv.teardown_msi_irq +# define platform_pci_fixup_bus ia64_mv.pci_fixup_bus # endif /* __attribute__((__aligned__(16))) is required to make size of the @@ -210,6 +217,7 @@ struct ia64_machine_vector { ia64_mv_migrate_t *migrate; ia64_mv_setup_msi_irq_t *setup_msi_irq; ia64_mv_teardown_msi_irq_t *teardown_msi_irq; + ia64_mv_pci_fixup_bus_t *pci_fixup_bus; } __attribute__((__aligned__(16))); /* align attrib? see above comment */ #define MACHVEC_INIT(name) \ @@ -257,6 +265,7 @@ struct ia64_machine_vector { platform_migrate, \ platform_setup_msi_irq, \ platform_teardown_msi_irq, \ + platform_pci_fixup_bus, \ } extern struct ia64_machine_vector ia64_mv; @@ -416,5 +425,8 @@ extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size #ifndef platform_teardown_msi_irq # define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL) #endif +#ifndef platform_pci_fixup_bus +# define platform_pci_fixup_bus machvec_noop_bus +#endif #endif /* _ASM_IA64_MACHVEC_H */ diff --git a/include/asm-ia64/machvec_sn2.h b/include/asm-ia64/machvec_sn2.h index c54b165b1c1..83325f6db03 100644 --- a/include/asm-ia64/machvec_sn2.h +++ b/include/asm-ia64/machvec_sn2.h @@ -69,6 +69,7 @@ extern ia64_mv_dma_supported sn_dma_supported; extern ia64_mv_migrate_t sn_migrate; extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq; extern ia64_mv_teardown_msi_irq_t sn_teardown_msi_irq; +extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus; /* @@ -127,6 +128,7 @@ extern ia64_mv_teardown_msi_irq_t sn_teardown_msi_irq; #define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL) #define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL) #endif +#define platform_pci_fixup_bus sn_pci_fixup_bus #include <asm/sn/io.h> diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h index ef616fd4cb1..825eb7d882e 100644 --- a/include/asm-ia64/pci.h +++ b/include/asm-ia64/pci.h @@ -26,16 +26,18 @@ void pcibios_config_init(void); struct pci_dev; /* - * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct correspondence - * between device bus addresses and CPU physical addresses. Platforms with a hardware I/O - * MMU _must_ turn this off to suppress the bounce buffer handling code in the block and - * network device layers. Platforms with separate bus address spaces _must_ turn this off - * and provide a device DMA mapping implementation that takes care of the necessary + * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct + * correspondence between device bus addresses and CPU physical addresses. + * Platforms with a hardware I/O MMU _must_ turn this off to suppress the + * bounce buffer handling code in the block and network device layers. + * Platforms with separate bus address spaces _must_ turn this off and provide + * a device DMA mapping implementation that takes care of the necessary * address translation. * - * For now, the ia64 platforms which may have separate/multiple bus address spaces all - * have I/O MMUs which support the merging of physically discontiguous buffers, so we can - * use that as the sole factor to determine the setting of PCI_DMA_BUS_IS_PHYS. + * For now, the ia64 platforms which may have separate/multiple bus address + * spaces all have I/O MMUs which support the merging of physically + * discontiguous buffers, so we can use that as the sole factor to determine + * the setting of PCI_DMA_BUS_IS_PHYS. */ extern unsigned long ia64_max_iommu_merge_mask; #define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL) @@ -52,9 +54,6 @@ pcibios_penalize_isa_irq (int irq, int active) /* We don't do dynamic PCI IRQ allocation */ } -#define HAVE_ARCH_PCI_MWI 1 -extern int pcibios_prep_mwi (struct pci_dev *); - #include <asm-generic/pci-dma-compat.h> /* pci_unmap_{single,page} is not a nop, thus... */ diff --git a/include/asm-ia64/sn/acpi.h b/include/asm-ia64/sn/acpi.h new file mode 100644 index 00000000000..2850a7ef5e7 --- /dev/null +++ b/include/asm-ia64/sn/acpi.h @@ -0,0 +1,16 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef _ASM_IA64_SN_ACPI_H +#define _ASM_IA64_SN_ACPI_H + +#include "acpi/acglobal.h" + +#define SN_ACPI_BASE_SUPPORT() (acpi_gbl_DSDT->oem_revision >= 0x20101) + +#endif /* _ASM_IA64_SN_ACPI_H */ diff --git a/include/asm-ia64/sn/pcidev.h b/include/asm-ia64/sn/pcidev.h index eac3561574b..9fe89a93d88 100644 --- a/include/asm-ia64/sn/pcidev.h +++ b/include/asm-ia64/sn/pcidev.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_IA64_SN_PCI_PCIDEV_H #define _ASM_IA64_SN_PCI_PCIDEV_H @@ -12,31 +12,29 @@ /* * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to - * the pcidev_info structs for all devices under a controller, we extend the - * definition of pci_controller, via sn_pci_controller, to include a list - * of pcidev_info. + * the pcidev_info structs for all devices under a controller, we keep a + * list of pcidev_info under pci_controller->platform_data. */ -struct sn_pci_controller { - struct pci_controller pci_controller; +struct sn_platform_data { + void *provider_soft; struct list_head pcidev_info; }; -#define SN_PCI_CONTROLLER(dev) ((struct sn_pci_controller *) dev->sysdata) +#define SN_PLATFORM_DATA(busdev) \ + ((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data)) #define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev) -#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \ - (struct pcibus_info *)((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data)) /* * Given a pci_bus, return the sn pcibus_bussoft struct. Note that * this only works for root busses, not for busses represented by PPB's. */ #define SN_PCIBUS_BUSSOFT(pci_bus) \ - ((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data)) + ((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) #define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \ - (struct pcibus_info *)((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data)) + ((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) /* * Given a struct pci_dev, return the sn pcibus_bussoft struct. Note * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due @@ -72,8 +70,6 @@ extern void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info); extern void sn_irq_unfixup(struct pci_dev *pci_dev); extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *); -extern void sn_pci_controller_fixup(int segment, int busnum, - struct pci_bus *bus); extern void sn_bus_store_sysdata(struct pci_dev *dev); extern void sn_bus_free_sysdata(void); extern void sn_generate_path(struct pci_bus *pci_bus, char *address); diff --git a/include/asm-ia64/sn/sn_feature_sets.h b/include/asm-ia64/sn/sn_feature_sets.h index 30dcfa442e5..bfdc36273ed 100644 --- a/include/asm-ia64/sn/sn_feature_sets.h +++ b/include/asm-ia64/sn/sn_feature_sets.h @@ -44,8 +44,14 @@ extern int sn_prom_feature_available(int id); * Once enabled, a feature cannot be disabled. * * By default, features are disabled unless explicitly enabled. + * + * These defines must be kept in sync with the corresponding + * PROM definitions in feature_sets.h. */ #define OSF_MCA_SLV_TO_OS_INIT_SLV 0 #define OSF_FEAT_LOG_SBES 1 +#define OSF_ACPI_ENABLE 2 +#define OSF_PCISEGMENT_ENABLE 3 + #endif /* _ASM_IA64_SN_FEATURE_SETS_H */ diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h index ba826b3f75b..be5d83ad7cb 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/include/asm-ia64/sn/sn_sal.h @@ -77,6 +77,7 @@ #define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated #define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a +#define SN_SAL_IOIF_INIT 0x0200005f #define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060 #define SN_SAL_BTE_RECOVER 0x02000061 #define SN_SAL_RESERVED_DO_NOT_USE 0x02000062 diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h index 46afd29b904..721c97f09b2 100644 --- a/include/asm-powerpc/pci.h +++ b/include/asm-powerpc/pci.h @@ -62,19 +62,13 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) } #ifdef CONFIG_PPC64 -#define HAVE_ARCH_PCI_MWI 1 -static inline int pcibios_prep_mwi(struct pci_dev *dev) -{ - /* - * We would like to avoid touching the cacheline size or MWI bit - * but we cant do that with the current pcibios_prep_mwi - * interface. pSeries firmware sets the cacheline size (which is not - * the cpu cacheline size in all cases) and hardware treats MWI - * the same as memory write. So we dont touch the cacheline size - * here and allow the generic code to set the MWI bit. - */ - return 0; -} + +/* + * We want to avoid touching the cacheline size or MWI bit. + * pSeries firmware sets the cacheline size (which is not the cpu cacheline + * size in all cases) and hardware treats MWI the same as memory write. + */ +#define PCI_DISABLE_MWI extern struct dma_mapping_ops pci_dma_ops; diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h index e1ea67bc32f..ca6560288ae 100644 --- a/include/asm-sparc64/pci.h +++ b/include/asm-sparc64/pci.h @@ -18,6 +18,8 @@ #define PCI_IRQ_NONE 0xffffffff +#define PCI_CACHE_LINE_BYTES 64 + static inline void pcibios_set_master(struct pci_dev *dev) { /* No special bus mastering setup handling */ @@ -291,10 +293,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); -/* Platform specific MWI support. */ -#define HAVE_ARCH_PCI_MWI -extern int pcibios_prep_mwi(struct pci_dev *dev); - extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res); diff --git a/include/linux/ioport.h b/include/linux/ioport.h index d42c8339907..cf8696d4a13 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -89,6 +89,7 @@ struct resource_list { #define IORESOURCE_ROM_ENABLE (1<<0) /* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */ #define IORESOURCE_ROM_SHADOW (1<<1) /* ROM is copy at C000:0 */ #define IORESOURCE_ROM_COPY (1<<2) /* ROM is alloc'd copy, resource field overlaid */ +#define IORESOURCE_ROM_BIOS_COPY (1<<3) /* ROM is BIOS copy, resource field overlaid */ /* PC/ISA/whatever - the normal PC address spaces: IO and memory */ extern struct resource ioport_resource; diff --git a/include/linux/pci.h b/include/linux/pci.h index 09be0f81b27..01c707261f9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -51,6 +51,7 @@ #include <linux/list.h> #include <linux/compiler.h> #include <linux/errno.h> +#include <asm/atomic.h> #include <linux/device.h> /* File state for mmap()s on /proc/bus/pci/X/Y */ @@ -159,7 +160,6 @@ struct pci_dev { unsigned int transparent:1; /* Transparent PCI bridge */ unsigned int multifunction:1;/* Part of multi-function device */ /* keep track of device state */ - unsigned int is_enabled:1; /* pci_enable_device has been called */ unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ unsigned int no_d1d2:1; /* only allow d0 or d3 */ @@ -167,6 +167,7 @@ struct pci_dev { unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; unsigned int msix_enabled:1; + atomic_t enable_cnt; /* pci_enable_device has been called */ u32 saved_config_space[16]; /* config space saved at suspend time */ struct hlist_head saved_cap_space; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index fa4e1d79978..e060a763794 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2211,6 +2211,13 @@ #define PCI_DEVICE_ID_INTEL_ICH8_4 0x2815 #define PCI_DEVICE_ID_INTEL_ICH8_5 0x283e #define PCI_DEVICE_ID_INTEL_ICH8_6 0x2850 +#define PCI_DEVICE_ID_INTEL_ICH9_0 0x2910 +#define PCI_DEVICE_ID_INTEL_ICH9_1 0x2911 +#define PCI_DEVICE_ID_INTEL_ICH9_2 0x2912 +#define PCI_DEVICE_ID_INTEL_ICH9_3 0x2913 +#define PCI_DEVICE_ID_INTEL_ICH9_4 0x2914 +#define PCI_DEVICE_ID_INTEL_ICH9_5 0x2915 +#define PCI_DEVICE_ID_INTEL_ICH9_6 0x2930 #define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340 #define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 #define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index c321316f1bc..064b1dc71c2 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -292,6 +292,12 @@ #define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ #define PCI_MSI_MASK_BIT 16 /* Mask bits register */ +/* MSI-X registers (these are at offset PCI_MSI_FLAGS) */ +#define PCI_MSIX_FLAGS_QSIZE 0x7FF +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) +#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) +#define PCI_MSIX_FLAGS_BITMASK (1 << 0) + /* CompactPCI Hotswap Register */ #define PCI_CHSWP_CSR 2 /* Control and Status Register */ |