diff options
| -rw-r--r-- | drivers/ssb/driver_pcicore.c | 29 |
1 files changed, 0 insertions, 29 deletions
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index f1dcd7969a5..0e8d3522461 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -246,20 +246,12 @@ static struct pci_controller ssb_pcicore_controller = { .pci_ops = &ssb_pcicore_pciops, .io_resource = &ssb_pcicore_io_resource, .mem_resource = &ssb_pcicore_mem_resource, - .mem_offset = 0x24000000, }; -static u32 ssb_pcicore_pcibus_iobase = 0x100; -static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; - /* This function is called when doing a pci_enable_device(). * We must first check if the device is a device on the PCI-core bridge. */ int ssb_pcicore_plat_dev_init(struct pci_dev *d) { - struct resource *res; - int pos, size; - u32 *base; - if (d->bus->ops != &ssb_pcicore_pciops) { /* This is not a device on the PCI-core bridge. */ return -ENODEV; @@ -268,27 +260,6 @@ int ssb_pcicore_plat_dev_init(struct pci_dev *d) ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", pci_name(d)); - /* Fix up resource bases */ - for (pos = 0; pos < 6; pos++) { - res = &d->resource[pos]; - if (res->flags & IORESOURCE_IO) - base = &ssb_pcicore_pcibus_iobase; - else - base = &ssb_pcicore_pcibus_membase; - res->flags |= IORESOURCE_PCI_FIXED; - if (res->end) { - size = res->end - res->start + 1; - if (*base & (size - 1)) - *base = (*base + size) & ~(size - 1); - res->start = *base; - res->end = res->start + size - 1; - *base += size; - pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); - } - /* Fix up PCI bridge BAR0 only */ - if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) - break; - } /* Fix up interrupt lines */ d->irq = ssb_mips_irq(extpci_core->dev) + 2; pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); |