diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-sc18is602.txt | 23 | ||||
| -rw-r--r-- | Documentation/spi/spi-sc18is602 | 36 | ||||
| -rw-r--r-- | drivers/spi/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/spi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-sc18is602.c | 364 | ||||
| -rw-r--r-- | include/linux/platform_data/sc18is602.h | 19 |
6 files changed, 449 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-sc18is602.txt b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt new file mode 100644 index 00000000000..02f9033270a --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt @@ -0,0 +1,23 @@ +NXP SC18IS602/SCIS603 + +Required properties: + - compatible : Should be one of + "nxp,sc18is602" + "nxp,sc18is602b" + "nxp,sc18is603" + - reg: I2C bus address + +Optional properties: + - clock-frequency : external oscillator clock frequency. If not + specified, the SC18IS602 default frequency (7372000) will be used. + +The clock-frequency property is relevant and needed only if the chip has an +external oscillator (SC18IS603). + +Example: + + sc18is603@28 { + compatible = "nxp,sc18is603"; + reg = <0x28>; + clock-frequency = <14744000>; + } diff --git a/Documentation/spi/spi-sc18is602 b/Documentation/spi/spi-sc18is602 new file mode 100644 index 00000000000..a45702865a3 --- /dev/null +++ b/Documentation/spi/spi-sc18is602 @@ -0,0 +1,36 @@ +Kernel driver spi-sc18is602 +=========================== + +Supported chips: + * NXP SI18IS602/602B/603 + Datasheet: http://www.nxp.com/documents/data_sheet/SC18IS602_602B_603.pdf + +Author: + Guenter Roeck <linux@roeck-us.net> + + +Description +----------- + +This driver provides connects a NXP SC18IS602/603 I2C-bus to SPI bridge to the +kernel's SPI core subsystem. + +The driver does not probe for supported chips, since the SI18IS602/603 does not +support Chip ID registers. You will have to instantiate the devices explicitly. +Please see Documentation/i2c/instantiating-devices for details. + + +Usage Notes +----------- + +This driver requires the I2C adapter driver to support raw I2C messages. I2C +adapter drivers which can only handle the SMBus protocol are not supported. + +The maximum SPI message size supported by SC18IS602/603 is 200 bytes. Attempts +to initiate longer transfers will fail with -EINVAL. EEPROM read operations and +similar large accesses have to be split into multiple chunks of no more than +200 bytes per SPI message (128 bytes of data per message is recommended). This +means that programs such as "cp" or "od", which automatically use large block +sizes to access a device, can not be used directly to read data from EEPROM. +Programs such as dd, where the block size can be specified, should be used +instead. diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 5f84b5563c2..920bb4d22d4 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -325,6 +325,12 @@ config SPI_S3C64XX help SPI driver for Samsung S3C64XX and newer SoCs. +config SPI_SC18IS602 + tristate "NXP SC18IS602/602B/603 I2C to SPI bridge" + depends on I2C + help + SPI driver for NXP SC18IS602/602B/603 I2C to SPI bridge. + config SPI_SH_MSIOF tristate "SuperH MSIOF SPI controller" depends on SUPERH && HAVE_CLK diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 3920dcf4c74..7559c984db7 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o spi-s3c24xx-hw-y := spi-s3c24xx.o spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o +obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o obj-$(CONFIG_SPI_SH) += spi-sh.o obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o diff --git a/drivers/spi/spi-sc18is602.c b/drivers/spi/spi-sc18is602.c new file mode 100644 index 00000000000..dd9896423f0 --- /dev/null +++ b/drivers/spi/spi-sc18is602.c @@ -0,0 +1,364 @@ +/* + * NXP SC18IS602/603 SPI driver + * + * Copyright (C) Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/platform_data/sc18is602.h> + +enum chips { sc18is602, sc18is602b, sc18is603 }; + +#define SC18IS602_BUFSIZ 200 +#define SC18IS602_CLOCK 7372000 + +#define SC18IS602_MODE_CPHA BIT(2) +#define SC18IS602_MODE_CPOL BIT(3) +#define SC18IS602_MODE_LSB_FIRST BIT(5) +#define SC18IS602_MODE_CLOCK_DIV_4 0x0 +#define SC18IS602_MODE_CLOCK_DIV_16 0x1 +#define SC18IS602_MODE_CLOCK_DIV_64 0x2 +#define SC18IS602_MODE_CLOCK_DIV_128 0x3 + +struct sc18is602 { + struct spi_master *master; + struct device *dev; + u8 ctrl; + u32 freq; + u32 speed; + + /* I2C data */ + struct i2c_client *client; + enum chips id; + u8 buffer[SC18IS602_BUFSIZ + 1]; + int tlen; /* Data queued for tx in buffer */ + int rindex; /* Receive data index in buffer */ +}; + +static int sc18is602_wait_ready(struct sc18is602 *hw, int len) +{ + int i, err; + int usecs = 1000000 * len / hw->speed + 1; + u8 dummy[1]; + + for (i = 0; i < 10; i++) { + err = i2c_master_recv(hw->client, dummy, 1); + if (err >= 0) + return 0; + usleep_range(usecs, usecs * 2); + } + return -ETIMEDOUT; +} + +static int sc18is602_txrx(struct sc18is602 *hw, struct spi_message *msg, + struct spi_transfer *t, bool do_transfer) +{ + unsigned int len = t->len; + int ret; + + if (hw->tlen == 0) { + /* First byte (I2C command) is chip select */ + hw->buffer[0] = 1 << msg->spi->chip_select; + hw->tlen = 1; + hw->rindex = 0; + } + /* + * We can not immediately send data to the chip, since each I2C message + * resembles a full SPI message (from CS active to CS inactive). + * Enqueue messages up to the first read or until do_transfer is true. + */ + if (t->tx_buf) { + memcpy(&hw->buffer[hw->tlen], t->tx_buf, len); + hw->tlen += len; + if (t->rx_buf) + do_transfer = true; + else + hw->rindex = hw->tlen - 1; + } else if (t->rx_buf) { + /* + * For receive-only transfers we still need to perform a dummy + * write to receive data from the SPI chip. + * Read data starts at the end of transmit data (minus 1 to + * account for CS). + */ + hw->rindex = hw->tlen - 1; + memset(&hw->buffer[hw->tlen], 0, len); + hw->tlen += len; + do_transfer = true; + } + + if (do_transfer && hw->tlen > 1) { + ret = sc18is602_wait_ready(hw, SC18IS602_BUFSIZ); + if (ret < 0) + return ret; + ret = i2c_master_send(hw->client, hw->buffer, hw->tlen); + if (ret < 0) + return ret; + if (ret != hw->tlen) + return -EIO; + + if (t->rx_buf) { + int rlen = hw->rindex + len; + + ret = sc18is602_wait_ready(hw, hw->tlen); + if (ret < 0) + return ret; + ret = i2c_master_recv(hw->client, hw->buffer, rlen); + if (ret < 0) + return ret; + if (ret != rlen) + return -EIO; + memcpy(t->rx_buf, &hw->buffer[hw->rindex], len); + } + hw->tlen = 0; + } + return len; +} + +static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode) +{ + u8 ctrl = 0; + int ret; + + if (mode & SPI_CPHA) + ctrl |= SC18IS602_MODE_CPHA; + if (mode & SPI_CPOL) + ctrl |= SC18IS602_MODE_CPOL; + if (mode & SPI_LSB_FIRST) + ctrl |= SC18IS602_MODE_LSB_FIRST; + + /* Find the closest clock speed */ + if (hz >= hw->freq / 4) { + ctrl |= SC18IS602_MODE_CLOCK_DIV_4; + hw->speed = hw->freq / 4; + } else if (hz >= hw->freq / 16) { + ctrl |= SC18IS602_MODE_CLOCK_DIV_16; + hw->speed = hw->freq / 16; + } else if (hz >= hw->freq / 64) { + ctrl |= SC18IS602_MODE_CLOCK_DIV_64; + hw->speed = hw->freq / 64; + } else { + ctrl |= SC18IS602_MODE_CLOCK_DIV_128; + hw->speed = hw->freq / 128; + } + + /* + * Don't do anything if the control value did not change. The initial + * value of 0xff for hw->ctrl ensures that the correct mode will be set + * with the first call to this function. + */ + if (ctrl == hw->ctrl) + return 0; + + ret = i2c_smbus_write_byte_data(hw->client, 0xf0, ctrl); + if (ret < 0) + return ret; + + hw->ctrl = ctrl; + + return 0; +} + +static int sc18is602_check_transfer(struct spi_device *spi, + struct spi_transfer *t, int tlen) +{ + int bpw; + uint32_t hz; + + if (t && t->len + tlen > SC18IS602_BUFSIZ) + return -EINVAL; + + bpw = spi->bits_per_word; + if (t && t->bits_per_word) + bpw = t->bits_per_word; + if (bpw != 8) + return -EINVAL; + + hz = spi->max_speed_hz; + if (t && t->speed_hz) + hz = t->speed_hz; + if (hz == 0) + return -EINVAL; + + return 0; +} + +static int sc18is602_transfer_one(struct spi_master *master, + struct spi_message *m) +{ + struct sc18is602 *hw = spi_master_get_devdata(master); + struct spi_device *spi = m->spi; + struct spi_transfer *t; + int status = 0; + + /* SC18IS602 does not support CS2 */ + if (hw->id == sc18is602 && spi->chip_select == 2) { + status = -ENXIO; + goto error; + } + + hw->tlen = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + u32 hz = t->speed_hz ? : spi->max_speed_hz; + bool do_transfer; + + status = sc18is602_check_transfer(spi, t, hw->tlen); + if (status < 0) + break; + + status = sc18is602_setup_transfer(hw, hz, spi->mode); + if (status < 0) + break; + + do_transfer = t->cs_change || list_is_last(&t->transfer_list, + &m->transfers); + + if (t->len) { + status = sc18is602_txrx(hw, m, t, do_transfer); + if (status < 0) + break; + m->actual_length += status; + } + status = 0; + + if (t->delay_usecs) + udelay(t->delay_usecs); + } +error: + m->status = status; + spi_finalize_current_message(master); + + return status; +} + +static int sc18is602_setup(struct spi_device *spi) +{ + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + if (spi->mode & ~(SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST)) + return -EINVAL; + + return sc18is602_check_transfer(spi, NULL, 0); +} + +static int sc18is602_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device_node *np = dev->of_node; + struct sc18is602_platform_data *pdata = dev_get_platdata(dev); + struct sc18is602 *hw; + struct spi_master *master; + int error; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -ENODEV; + + master = spi_alloc_master(dev, sizeof(struct sc18is602)); + if (!master) + return -ENOMEM; + + hw = spi_master_get_devdata(master); + i2c_set_clientdata(client, hw); + + hw->master = master; + hw->client = client; + hw->dev = dev; + hw->ctrl = 0xff; + + hw->id = id->driver_data; + + switch (hw->id) { + case sc18is602: + case sc18is602b: + master->num_chipselect = 4; + hw->freq = SC18IS602_CLOCK; + break; + case sc18is603: + master->num_chipselect = 2; + if (pdata) { + hw->freq = pdata->clock_frequency; + } else { + const __be32 *val; + int len; + + val = of_get_property(np, "clock-frequency", &len); + if (val && len >= sizeof(__be32)) + hw->freq = be32_to_cpup(val); + } + if (!hw->freq) + hw->freq = SC18IS602_CLOCK; + break; + } + master->bus_num = client->adapter->nr; + master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; + master->setup = sc18is602_setup; + master->transfer_one_message = sc18is602_transfer_one; + master->dev.of_node = np; + + error = spi_register_master(master); + if (error) + goto error_reg; + + return 0; + +error_reg: + spi_master_put(master); + return error; +} + +static int sc18is602_remove(struct i2c_client *client) +{ + struct sc18is602 *hw = i2c_get_clientdata(client); + struct spi_master *master = hw->master; + + spi_unregister_master(master); + + return 0; +} + +static const struct i2c_device_id sc18is602_id[] = { + { "sc18is602", sc18is602 }, + { "sc18is602b", sc18is602b }, + { "sc18is603", sc18is603 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sc18is602_id); + +static struct i2c_driver sc18is602_driver = { + .driver = { + .name = "sc18is602", + }, + .probe = sc18is602_probe, + .remove = sc18is602_remove, + .id_table = sc18is602_id, +}; + +module_i2c_driver(sc18is602_driver); + +MODULE_DESCRIPTION("SC18IC602/603 SPI Master Driver"); +MODULE_AUTHOR("Guenter Roeck"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h new file mode 100644 index 00000000000..997b0663415 --- /dev/null +++ b/include/linux/platform_data/sc18is602.h @@ -0,0 +1,19 @@ +/* + * Platform data for NXP SC18IS602/603 + * + * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/spi/sc18is602 file. + */ + +/** + * struct sc18is602_platform_data - sc18is602 info + * @clock_frequency SC18IS603 oscillator frequency + */ +struct sc18is602_platform_data { + u32 clock_frequency; +}; |