diff options
| -rw-r--r-- | arch/m68k/include/asm/anchor.h | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/arch/m68k/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h deleted file mode 100644 index 871c0d5cfc3..00000000000 --- a/arch/m68k/include/asm/anchor.h +++ /dev/null @@ -1,112 +0,0 @@ -/****************************************************************************/ - -/* - * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. - * - * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) - */ - -/****************************************************************************/ -#ifndef anchor_h -#define anchor_h -/****************************************************************************/ - -/* - * Define basic addressing info. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#else -#define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ -#define COMEM_IRQ 25 /* IRQ of anchor part */ -#endif - -/****************************************************************************/ - -/* - * 4-byte registers of CO-MEM, so adjust register addresses for - * easy access. Handy macro for word access too. - */ -#define LREG(a) ((a) >> 2) -#define WREG(a) ((a) >> 1) - - -/* - * Define base addresses within CO-MEM Lite register address space. - */ -#define COMEM_I2O 0x0000 /* I2O registers */ -#define COMEM_OPREGS 0x0400 /* Operation registers */ -#define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ -#define COMEM_SHMEM 0x4000 /* Shared memory region */ - -#define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ - - -/* - * Define CO-MEM Registers. - */ -#define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ -#define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ -#define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ -#define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ -#define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ -#define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ -#define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ -#define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ - -#define COMEM_DAHBASE 0x0460 /* Direct access base address */ - -#define COMEM_NVCMD 0x04a0 /* I2C serial command */ -#define COMEM_NVREAD 0x04a4 /* I2C serial read */ -#define COMEM_NVSTAT 0x04a8 /* I2C status */ - -#define COMEM_DMALBASE 0x04b0 /* DMA local base address */ -#define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ -#define COMEM_DMASIZE 0x04b8 /* DMA size */ -#define COMEM_DMACTL 0x04bc /* DMA control */ - -#define COMEM_HCTL 0x04e0 /* Host control */ -#define COMEM_HINT 0x04e4 /* Host interrupt control/status */ -#define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ -#define COMEM_LINT 0x04f4 /* Local interrupt contole status */ -#define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ - -#define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ - - -/* - * Commands and flags for use with Direct Access Register. - */ -#define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ -#define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ -#define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ -#define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ -#define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ -#define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ -#define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ -#define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ - -#define COMEM_DA_ADDR(a) ((a) & 0xffffe000) - -#define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) - - -/* - * The PCI bus will be limited in what slots will actually be used. - * Define valid device numbers for different boards. - */ -#if defined(CONFIG_M5407C3) -#define COMEM_MINDEV 14 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ -#define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ -#else -#define COMEM_MINDEV 0 /* Minimum valid DEVICE */ -#define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ -#endif - -#define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ - - -/****************************************************************************/ -#endif /* anchor_h */ |