diff options
47 files changed, 308 insertions, 304 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0f441740c22..d077ef8426d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ + omap4-panda-a4.dtb \ omap4-panda-es.dtb \ omap4-var-som.dtb \ omap4-sdp.dtb \ @@ -131,8 +132,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \ - sun5i-olinuxino.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ + sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index b01c0d745fc..fa04c7b18bc 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -21,17 +21,17 @@ }; soc { - aipi@10000000 { /* aipi */ - + aipi@10000000 { /* aipi1 */ uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; + }; - fec@1002b000 { + aipi@10020000 { /* aipi2 */ + ethernet@1002b000 { status = "okay"; }; }; }; - }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index af50469e34b..53b0ec0c228 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -21,8 +21,7 @@ }; soc { - aipi@10000000 { /* aipi */ - + aipi@10000000 { /* aipi1 */ serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; @@ -38,10 +37,6 @@ status = "okay"; }; - ethernet@1002b000 { - status = "okay"; - }; - i2c@1001d000 { clock-frequency = <400000>; status = "okay"; @@ -60,6 +55,12 @@ }; }; }; + + aipi@10020000 { /* aipi2 */ + ethernet@1002b000 { + status = "okay"; + }; + }; }; nor_flash@c0000000 { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index b8d3905915a..5a82cb5707a 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -55,7 +55,7 @@ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x10000000 0x10000000>; + reg = <0x10000000 0x20000>; ranges; wdog: wdog@10002000 { @@ -211,6 +211,15 @@ status = "disabled"; }; + }; + + aipi@10020000 { /* AIPI2 */ + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10020000 0x20000>; + ranges; + fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 77b84e17c47..9b0d07746cb 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -15,6 +15,6 @@ memory { device_type = "memory"; - reg = <0x80000000 0x84000000>; /* 64 MB */ + reg = <0x80000000 0x4000000>; /* 64 MB */ }; }; diff --git a/arch/arm/boot/dts/sun4i-cubieboard.dts b/arch/arm/boot/dts/sun4i-cubieboard.dts index f4ca126ad99..5cab8254043 100644 --- a/arch/arm/boot/dts/sun4i-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-cubieboard.dts @@ -11,11 +11,11 @@ */ /dts-v1/; -/include/ "sun4i.dtsi" +/include/ "sun4i-a10.dtsi" / { model = "Cubietech Cubieboard"; - compatible = "cubietech,cubieboard", "allwinner,sun4i"; + compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; aliases { serial0 = &uart0; diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts index d6ff889a5d8..498a091a4ea 100644 --- a/arch/arm/boot/dts/sun5i-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts @@ -12,11 +12,11 @@ */ /dts-v1/; -/include/ "sun5i.dtsi" +/include/ "sun5i-a13.dtsi" / { model = "Olimex A13-Olinuxino"; - compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; + compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; chosen { bootargs = "earlyprintk console=ttyS0,115200"; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 7211772edd9..0299915575a 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -41,6 +41,7 @@ #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> +#include <mach/sram.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index 16026c2b1c8..d64274fc576 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr) static inline void putc(int c) { - int i; - - for (i = 0; i < 1000; i++) { - /* Transmit fifo not full? */ - if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) - break; - } + /* Transmit fifo not full? */ + while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF) + ; __raw_writeb(c, PHYS_UART_DATA); } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index dac146df79a..04744f9c120 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -25,7 +25,7 @@ void exynos_init_late(void); #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else -static int exynos_pm_late_initcall(void) { return 0; } +static inline int exynos_pm_late_initcall(void) { return 0; } #endif #ifdef CONFIG_ARCH_EXYNOS4 diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index e8c0473c756..579023f59dc 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, unsigned long rate_ckih1, unsigned long rate_ckih2) { int i; + u32 val; struct device_node *np; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE); @@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, imx_print_silicon_rev("i.MX51", mx51_revision()); clk_disable_unprepare(clk[iim_gate]); + /* + * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no + * longer supported. Set to one for better power saving. + * + * The effect of not setting these bits is that MIPI clocks can't be + * enabled without the IPU clock being enabled aswell. + */ + val = readl(MXC_CCM_CCDR); + val |= 1 << 18; + writel(val, MXC_CCM_CCDR); + + val = readl(MXC_CCM_CLPCR); + val |= 1 << 23; + writel(val, MXC_CCM_CLPCR); + return 0; } diff --git a/arch/arm/plat-mxc/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c index 508404ddd4e..11bd01d402f 100644 --- a/arch/arm/plat-mxc/devices/platform-mx2-emma.c +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mx2_emmaprp_data_entry_single(soc) \ { \ diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index be0f62bf903..41b581fd021 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC config SOC_HAS_REALTIME_COUNTER bool "Real time free running counter" + depends on SOC_OMAP5 + default y config ARCH_OMAP2 bool "TI OMAP2" @@ -79,7 +81,6 @@ config SOC_OMAP5 select ARM_GIC select CPU_V7 select HAVE_SMP - select SOC_HAS_REALTIME_COUNTER select COMMON_CLK comment "OMAP Core Type" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 7b201546834..bb73afc9ac1 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = -1, }; static struct omap_dss_device sdp3430_dvi_device = { diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4be58fd071f..f81a303b87f 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = -1, }; static struct omap_dss_device am3517_evm_dvi_device = { diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c8e37dc0089..b3102c2f4a3 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = CM_T35_DVI_EN_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device cm_t35_dvi_device = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 7667eb74952..12865af25d3 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = 1, }; static struct omap_dss_device devkit8000_dvi_device = { diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 9a3878ec225..3be1311f9e3 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -27,14 +27,12 @@ #include <linux/io.h> #include <linux/input/matrix_keypad.h> #include <linux/mfd/menelaus.h> +#include <linux/omap-dma.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <linux/omap-dma.h> -#include <plat/debug-devices.h> - #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -42,11 +40,9 @@ #include "mux.h" #include "control.h" #include "gpmc.h" +#include "gpmc-smc91x.h" #define H4_FLASH_CS 0 -#define H4_SMC91X_CS 1 - -#define H4_ETHR_GPIO_IRQ 92 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) static const uint32_t board_matrix_keys[] = { @@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void) return 0; } -static inline void __init h4_init_debug(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int muxed, rate; - struct clk *gpmc_fck; - - eth_cs = H4_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 92, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL, +}; +static void __init board_smc91x_init(void) +{ if (is_gpmc_muxed()) - muxed = 0x200; - else - muxed = 0; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, - 0x00011000 | muxed); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } + board_smc91x_data.flags |= GPMC_MUX_ADD_DATA; - udelay(100); + omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT); + gpmc_smc91x_init(&board_smc91x_data); +} - omap_mux_init_gpio(92, 0); - if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) - gpmc_cs_free(eth_cs); +#else -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init h4_init_flash(void) { unsigned long base; @@ -371,6 +327,7 @@ static void __init omap_h4_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); + board_smc91x_init(); omap_display_init(&h4_dss_data); } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 54647d6286b..3985f35aee0 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device omap3_evm_dvi_device = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index d8638b3b4f9..53a6cbcf974 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = DSS_ENABLE_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device omap3_stalker_dvi_device = { diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index aa56c3e5bb3..5789a5e2556 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -40,6 +40,14 @@ #define OMAP4430_MODULEMODE_HWCTRL_SHIFT 0 #define OMAP4430_MODULEMODE_SWCTRL_SHIFT 1 +/* + * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section + * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK + * must be set to 196.608 MHz" and hence, the DPLL locked frequency is + * half of this value. + */ +#define OMAP4_DPLL_ABE_DEFFREQ 98304000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -124,6 +132,8 @@ static struct dpll_data dpll_abe_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .m4xen_mask = OMAP4430_DPLL_REGM4XEN_MASK, + .lpmode_mask = OMAP4430_DPLL_LPMODE_EN_MASK, .max_multiplier = 2047, .max_divider = 128, .min_divider = 1, @@ -233,7 +243,7 @@ static struct dpll_data dpll_core_dd = { static const char *dpll_core_ck_parents[] = { - "sys_clkin_ck", + "sys_clkin_ck", "core_hsd_byp_clk_mux_ck" }; static struct clk dpll_core_ck; @@ -286,9 +296,9 @@ DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT, OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL); -DEFINE_CLK_OMAP_HSDIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", - &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, - OMAP4430_CLKSEL_0_1_MASK); +DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, + 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT, + OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL); DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT, @@ -363,8 +373,21 @@ static struct dpll_data dpll_iva_dd = { .min_divider = 1, }; +static const char *dpll_iva_ck_parents[] = { + "sys_clkin_ck", "iva_hsd_byp_clk_mux_ck" +}; + static struct clk dpll_iva_ck; +static const struct clk_ops dpll_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .get_parent = &omap2_init_dpll_parent, +}; + static struct clk_hw_omap dpll_iva_ck_hw = { .hw = { .clk = &dpll_iva_ck, @@ -373,7 +396,7 @@ static struct clk_hw_omap dpll_iva_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops); static const char *dpll_iva_x2_ck_parents[] = { "dpll_iva_ck", @@ -416,6 +439,10 @@ static struct dpll_data dpll_mpu_dd = { .min_divider = 1, }; +static const char *dpll_mpu_ck_parents[] = { + "sys_clkin_ck", "div_mpu_hs_clk" +}; + static struct clk dpll_mpu_ck; static struct clk_hw_omap dpll_mpu_ck_hw = { @@ -426,7 +453,7 @@ static struct clk_hw_omap dpll_mpu_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops); DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2); @@ -464,6 +491,9 @@ static struct dpll_data dpll_per_dd = { .min_divider = 1, }; +static const char *dpll_per_ck_parents[] = { + "sys_clkin_ck", "per_hsd_byp_clk_mux_ck" +}; static struct clk dpll_per_ck; @@ -475,7 +505,7 @@ static struct clk_hw_omap dpll_per_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops); DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0, OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT, @@ -559,6 +589,10 @@ static struct dpll_data dpll_usb_dd = { .min_divider = 1, }; +static const char *dpll_usb_ck_parents[] = { + "sys_clkin_ck", "usb_hs_clk_div_ck" +}; + static struct clk dpll_usb_ck; static struct clk_hw_omap dpll_usb_ck_hw = { @@ -569,7 +603,7 @@ static struct clk_hw_omap dpll_usb_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops); static const char *dpll_usb_clkdcoldo_ck_parents[] = { "dpll_usb_ck", @@ -696,9 +730,13 @@ DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0, OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT, OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL); +static const char *dbgclk_mux_ck_parents[] = { + "sys_clkin_ck" +}; + static struct clk dbgclk_mux_ck; DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL); -DEFINE_STRUCT_CLK(dbgclk_mux_ck, dpll_core_ck_parents, +DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents, dpll_usb_clkdcoldo_ck_ops); /* Leaf clocks controlled by modules */ @@ -1935,10 +1973,10 @@ static struct omap_clk omap44xx_clks[] = { CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("49038000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), }; @@ -1955,6 +1993,7 @@ int __init omap4xxx_clk_init(void) { u32 cpu_clkflg; struct omap_clk *c; + int rc; if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; @@ -1983,5 +2022,18 @@ int __init omap4xxx_clk_init(void) omap2_clk_enable_init_clocks(enable_init_clks, ARRAY_SIZE(enable_init_clks)); + /* + * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power + * state when turning the ABE clock domain. Workaround this by + * locking the ABE DPLL on boot. + */ + if (cpu_is_omap446x()) { + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); + } + return 0; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 9917f793c3b..b40204837bd 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -195,6 +195,10 @@ struct clksel { * @enable_mask: mask of the DPLL mode bitfield in @control_reg * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @last_rounded_m4xen: cache of the last M4X result of + * omap4_dpll_regm4xen_round_rate() + * @last_rounded_lpmode: cache of the last lpmode result of + * omap4_dpll_lpmode_recalc() * @max_multiplier: maximum valid non-bypass multiplier value (actual) * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() * @min_divider: minimum valid non-bypass divider value (actual) @@ -205,6 +209,8 @@ struct clksel { * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg + * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs @@ -233,6 +239,8 @@ struct dpll_data { u32 enable_mask; unsigned long last_rounded_rate; u16 last_rounded_m; + u8 last_rounded_m4xen; + u8 last_rounded_lpmode; u16 max_multiplier; u8 last_rounded_n; u8 min_divider; @@ -245,6 +253,8 @@ struct dpll_data { u32 idlest_mask; u32 dco_mask; u32 sddiv_mask; + u32 lpmode_mask; + u32 m4xen_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 384873580b2..7faf82d4e85 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -998,7 +998,8 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) spin_lock_irqsave(&clkdm->lock, flags); /* corner case: disabling unused clocks */ - if (__clk_get_enable_count(clk) == 0) + if ((__clk_get_enable_count(clk) == 0) && + (atomic_read(&clkdm->usecount) == 0)) goto ccd_exit; if (atomic_read(&clkdm->usecount) == 0) { diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 5c2fd4863b2..2dabb9ecb98 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -16,8 +16,6 @@ #include <linux/init.h> #include <linux/platform_data/dsp-omap.h> -#include <plat/vram.h> - #include "common.h" #include "omap-secure.h" @@ -32,7 +30,6 @@ int __weak omap_secure_ram_reserve_memblock(void) void __init omap_reserve(void) { - omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); omap_barrier_reserve_memblock(); diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index bca7a888570..22590dbe8f1 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -40,6 +40,8 @@ struct omap3_idle_statedata { u32 core_state; }; +static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; + static struct omap3_idle_statedata omap3_idle_data[] = { { .mpu_state = PWRDM_POWER_ON, @@ -71,7 +73,7 @@ static struct omap3_idle_statedata omap3_idle_data[] = { }, }; -static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; +/* Private functions */ static int __omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_driver *drv, @@ -260,11 +262,11 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, return ret; } -DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); +static DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); -struct cpuidle_driver omap3_idle_driver = { - .name = "omap3_idle", - .owner = THIS_MODULE, +static struct cpuidle_driver omap3_idle_driver = { + .name = "omap3_idle", + .owner = THIS_MODULE, .states = { { .enter = omap3_enter_idle_bm, @@ -327,6 +329,8 @@ struct cpuidle_driver omap3_idle_driver = { .safe_state_index = 0, }; +/* Public functions */ + /** * omap3_idle_init - Init routine for OMAP3 idle * diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 288bee6cbb7..d639aef0ded 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -54,6 +54,8 @@ static struct clockdomain *cpu_clkdm[NR_CPUS]; static atomic_t abort_barrier; static bool cpu_done[NR_CPUS]; +/* Private functions */ + /** * omap4_enter_idle_coupled_[simple/coupled] - OMAP4 cpuidle entry functions * @dev: cpuidle device @@ -161,9 +163,19 @@ fail: return index; } -DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); +/* + * For each cpu, setup the broadcast timer because local timers + * stops for the states above C1. + */ +static void omap_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + +static DEFINE_PER_CPU(struct cpuidle_device, omap4_idle_dev); -struct cpuidle_driver omap4_idle_driver = { +static struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, .en_core_tk_irqen = 1, @@ -178,7 +190,7 @@ struct cpuidle_driver omap4_idle_driver = { .desc = "MPUSS ON" }, { - /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ + /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, @@ -200,15 +212,7 @@ struct cpuidle_driver omap4_idle_driver = { .safe_state_index = 0, }; -/* - * For each cpu, setup the broadcast timer because local timers - * stops for the states above C1. - */ -static void omap_setup_broadcast_timer(void *arg) -{ - int cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); -} +/* Public functions */ /** * omap4_idle_init - Init routine for OMAP4 idle diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index fafb28c0dcb..2bb18838cba 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -291,16 +291,13 @@ static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) /* * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly - * @clk: struct clk * of DPLL to set - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * @freqsel: FREQSEL value to set + * @clk: struct clk * of DPLL to set + * @freqsel: FREQSEL value to set * - * Program the DPLL with the supplied M, N values, and wait for the DPLL to - * lock.. Returns -EINVAL upon error, or 0 upon success. + * Program the DPLL with the last M, N values calculated, and wait for + * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success. */ -static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n, - u16 freqsel) +static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) { struct dpll_data *dd = clk->dpll_data; u8 dco, sd_div; @@ -323,23 +320,45 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 m, u8 n, /* Set DPLL multiplier, divider */ v = __raw_readl(dd->mult_div1_reg); v &= ~(dd->mult_mask | dd->div1_mask); - v |= m << __ffs(dd->mult_mask); - v |= (n - 1) << __ffs(dd->div1_mask); + v |= dd->last_rounded_m << __ffs(dd->mult_mask); + v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); /* Configure dco and sd_div for dplls that have these fields */ if (dd->dco_mask) { - _lookup_dco(clk, &dco, m, n); + _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n); v &= ~(dd->dco_mask); v |= dco << __ffs(dd->dco_mask); } if (dd->sddiv_mask) { - _lookup_sddiv(clk, &sd_div, m, n); + _lookup_sddiv(clk, &sd_div, dd->last_rounded_m, + dd->last_rounded_n); v &= ~(dd->sddiv_mask); v |= sd_div << __ffs(dd->sddiv_mask); } __raw_writel(v, dd->mult_div1_reg); + /* Set 4X multiplier and low-power mode */ + if (dd->m4xen_mask || dd->lpmode_mask) { + v = __raw_readl(dd->control_reg); + + if (dd->m4xen_mask) { + if (dd->last_rounded_m4xen) + v |= dd->m4xen_mask; + else + v &= ~dd->m4xen_mask; + } + + if (dd->lpmode_mask) { + if (dd->last_rounded_lpmode) + v |= dd->lpmode_mask; + else + v &= ~dd->lpmode_mask; + } + + __raw_writel(v, dd->control_reg); + } + /* We let the clock framework set the other output dividers later */ /* REVISIT: Set ramp-up delay? */ @@ -492,8 +511,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__, __clk_get_name(hw->clk), rate); - ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, - dd->last_rounded_n, freqsel); + ret = omap3_noncore_dpll_program(clk, freqsel); if (!ret) new_parent = dd->clk_ref; } diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index d3326c474fd..d28b0f72671 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -20,6 +20,15 @@ #include "clock44xx.h" #include "cm-regbits-44xx.h" +/* + * Maximum DPLL input frequency (FINT) and output frequency (FOUT) that + * can supported when using the DPLL low-power mode. Frequencies are + * defined in OMAP4430/60 Public TRM section 3.6.3.3.2 "Enable Control, + * Status, and Low-Power Operation Mode". + */ +#define OMAP4_DPLL_LP_FINT_MAX 1000000 +#define OMAP4_DPLL_LP_FOUT_MAX 100000000 + /* Supported only on OMAP4 */ int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk) { @@ -82,6 +91,31 @@ const struct clk_hw_omap_ops clkhwops_omap4_dpllmx = { }; /** + * omap4_dpll_lpmode_recalc - compute DPLL low-power setting + * @dd: pointer to the dpll data structure + * + * Calculates if low-power mode can be enabled based upon the last + * multiplier and divider values calculated. If low-power mode can be + * enabled, then the bit to enable low-power mode is stored in the + * last_rounded_lpmode variable. This implementation is based upon the + * criteria for enabling low-power mode as described in the OMAP4430/60 + * Public TRM section 3.6.3.3.2 "Enable Control, Status, and Low-Power + * Operation Mode". + */ +static void omap4_dpll_lpmode_recalc(struct dpll_data *dd) +{ + long fint, fout; + + fint = __clk_get_rate(dd->clk_ref) / (dd->last_rounded_n + 1); + fout = fint * dd->last_rounded_m; + + if ((fint < OMAP4_DPLL_LP_FINT_MAX) && (fout < OMAP4_DPLL_LP_FOUT_MAX)) + dd->last_rounded_lpmode = 1; + else + dd->last_rounded_lpmode = 0; +} + +/** * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit * @clk: struct clk * of the DPLL to compute the rate for * @@ -130,7 +164,6 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, unsigned long *parent_rate) { struct clk_hw_omap *clk = to_clk_hw_omap(hw); - u32 v; struct dpll_data *dd; long r; @@ -139,18 +172,31 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, dd = clk->dpll_data; - /* regm4xen adds a multiplier of 4 to DPLL calculations */ - v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK; - - if (v) - target_rate = target_rate / OMAP4430_REGM4XEN_MULT; + dd->last_rounded_m4xen = 0; + /* + * First try to compute the DPLL configuration for + * target rate without using the 4X multiplier. + */ r = omap2_dpll_round_rate(hw, target_rate, NULL); + if (r != ~0) + goto out; + + /* + * If we did not find a valid DPLL configuration, try again, but + * this time see if using the 4X multiplier can help. Enabling the + * 4X multiplier is equivalent to dividing the target rate by 4. + */ + r = omap2_dpll_round_rate(hw, target_rate / OMAP4430_REGM4XEN_MULT, + NULL); if (r == ~0) return r; - if (v) - clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; + dd->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; + dd->last_rounded_m4xen = 1; + +out: + omap4_dpll_lpmode_recalc(dd); - return clk->dpll_data->last_rounded_rate; + return dd->last_rounded_rate; } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 26126343d6a..6a217c98db5 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -135,10 +135,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, old_mode = omap_mux_read(partition, gpio_mux->reg_offset); mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); - if (partition->flags & OMAP_MUX_GPIO_IN_MODE3) - mux_mode |= OMAP_MUX_MODE3; - else - mux_mode |= OMAP_MUX_MODE4; + mux_mode |= partition->gpio; pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__, gpio_mux->muxnames[0], gpio, old_mode, mux_mode); omap_mux_write(partition, mux_mode, gpio_mux->reg_offset); @@ -800,7 +797,7 @@ int __init omap_mux_late_init(void) struct omap_mux *m = &e->mux; u16 mode = omap_mux_read(partition, m->reg_offset); - if (OMAP_MODE_GPIO(mode)) + if (OMAP_MODE_GPIO(partition, mode)) continue; #ifndef CONFIG_DEBUG_FS @@ -1065,7 +1062,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition, } #else /* Skip pins that are not muxed as GPIO by bootloader */ - if (!OMAP_MODE_GPIO(omap_mux_read(partition, + if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition, superset->reg_offset))) { superset++; continue; @@ -1132,6 +1129,7 @@ int __init omap_mux_init(const char *name, u32 flags, partition->name = name; partition->flags = flags; + partition->gpio = flags & OMAP_MUX_MODE7; partition->size = mux_size; partition->phys = mux_pbase; partition->base = ioremap(mux_pbase, mux_size); diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 76f9b3c2f58..fdb22f14021 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -58,7 +58,8 @@ #define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN -#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \ + partition->gpio) #define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ @@ -79,13 +80,20 @@ /* * omap_mux_init flags definition: * + * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control + * register which includes values from 0-7. * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits. * The default value is 16 bits. - * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3. - * The default is mode4. */ -#define OMAP_MUX_REG_8BIT (1 << 0) -#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1) +#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0 +#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1 +#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2 +#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3 +#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4 +#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5 +#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6 +#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7 +#define OMAP_MUX_REG_8BIT (1 << 3) /** * struct omap_board_data - board specific device data @@ -105,6 +113,7 @@ struct omap_board_data { * struct mux_partition - contain partition related information * @name: name of the current partition * @flags: flags specific to this partition + * @gpio: gpio mux mode * @phys: physical address * @size: partition size * @base: virtual address after ioremap @@ -114,6 +123,7 @@ struct omap_board_data { struct omap_mux_partition { const char *name; u32 flags; + u32 gpio; u32 phys; u32 size; void __iomem *base; diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index c47140bbbec..c53609f4629 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) return -EINVAL; } - return omap_mux_init("core", 0, + return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4, OMAP3_CONTROL_PADCONF_MUX_PBASE, OMAP3_CONTROL_PADCONF_MUX_SIZE, omap3_muxmodes, package_subset, board_subset, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 93d102535c8..04fdbc4c499 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,8 +27,7 @@ #include <linux/pm_runtime.h> #include <linux/console.h> #include <linux/omap-dma.h> - -#include <plat/omap-serial.h> +#include <linux/platform_data/serial-omap.h> #include "common.h" #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 7016637b531..06e14154362 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -190,7 +190,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, * kernel registering these devices remove them dynamically from the device * tree on boot. */ -void __init omap_dmtimer_init(void) +static void __init omap_dmtimer_init(void) { struct device_node *np; @@ -210,7 +210,7 @@ void __init omap_dmtimer_init(void) * * Get the timer errata flags that are specific to the OMAP device being used. */ -u32 __init omap_dm_timer_get_errata(void) +static u32 __init omap_dm_timer_get_errata(void) { if (cpu_is_omap24xx()) return 0; @@ -392,7 +392,7 @@ static struct of_device_id omap_counter_match[] __initdata = { }; /* Setup free-running counter for clocksource */ -static int __init omap2_sync32k_clocksource_init(void) +static int __init __maybe_unused omap2_sync32k_clocksource_init(void) { int ret; struct device_node *np = NULL; diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index d1dbe125b34..2e44e8a2288 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) if (cpu_is_omap34xx()) { setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); + + if (omap_rev() <= OMAP3430_REV_ES2_1) + usbhs_data.single_ulpi_bypass = true; + } else if (cpu_is_omap44xx()) { setup_4430ehci_io_mux(pdata->port_mode); setup_4430ohci_io_mux(pdata->port_mode); diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index 0816562725f..d54cfc54b9f 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -104,7 +104,7 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = { static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { /* name parent rate enabled */ { "clk_m", NULL, 0, true }, - { "pll_p", "clk_m", 408000000, true }, + { "pll_p", "pll_ref", 408000000, true }, { "pll_p_out1", "pll_p", 9600000, true }, { "pll_p_out4", "pll_p", 102000000, true }, { "sclk", "pll_p_out4", 102000000, true }, diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index efc000e32e1..d7147779f8e 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -2045,9 +2045,7 @@ struct clk_ops tegra30_periph_clk_ops = { static int tegra30_dsib_clk_set_parent(struct clk_hw *hw, u8 index) { struct clk *d = clk_get_sys(NULL, "pll_d"); - /* The DSIB parent selection bit is in PLLD base - register - can not do direct r-m-w, must be - protected by PLLD lock */ + /* The DSIB parent selection bit is in PLLD base register */ tegra_clk_cfg_ex( d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, index); diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 8b204ae6900..4ce77cdc31c 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -27,7 +27,6 @@ #include <linux/mtd/nand.h> #include <linux/mtd/fsmc.h> #include <linux/pinctrl/machine.h> -#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/dma-mapping.h> #include <linux/platform_data/clk-u300.h> @@ -1553,39 +1552,6 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = { pin_highz_conf), }; -struct u300_mux_hog { - struct device *dev; - struct pinctrl *p; -}; - -static struct u300_mux_hog u300_mux_hogs[] = { - { - .dev = &uart0_device.dev, - }, - { - .dev = &mmcsd_device.dev, - }, -}; - -static int __init u300_pinctrl_fetch(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) { - struct pinctrl *p; - - p = pinctrl_get_select_default(u300_mux_hogs[i].dev); - if (IS_ERR(p)) { - pr_err("u300: could not get pinmux hog for dev %s\n", - dev_name(u300_mux_hogs[i].dev)); - continue; - } - u300_mux_hogs[i].p = p; - } - return 0; -} -subsys_initcall(u300_pinctrl_fetch); - /* * Notice that AMBA devices are initialized before platform devices. * diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 4b24c999265..a5e05f6e256 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -8,6 +8,7 @@ #ifndef __DEVICES_DB8500_H #define __DEVICES_DB8500_H +#include <linux/platform_data/usb-musb-ux500.h> #include <mach/irqs.h> #include "devices-common.h" diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 8d885848600..9d9aa2f5512 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -11,7 +11,6 @@ obj- := # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o -obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c deleted file mode 100644 index a609e216181..00000000000 --- a/arch/arm/plat-omap/debug-devices.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/arch/arm/plat-omap/debug-devices.c - * - * Copyright (C) 2005 Nokia Corporation - * Modified from mach-omap2/board-h4.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/smc91x.h> - -#include <plat/debug-devices.h> - -/* Many OMAP development platforms reuse the same "debug board"; these - * platforms include H2, H3, H4, and Perseus2. - */ - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource led_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device led_device = { - .name = "omap_dbg_led", - .id = -1, - .num_resources = ARRAY_SIZE(led_resources), - .resource = led_resources, -}; - -static struct platform_device *debug_devices[] __initdata = { - &smc91x_device, - &led_device, - /* ps2 kbd + mouse ports */ - /* 4 extra uarts */ - /* 6 input dip switches */ - /* 8 output pins */ -}; - -int __init debug_card_init(u32 addr, unsigned gpio) -{ - int status; - - smc91x_resources[0].start = addr + 0x300; - smc91x_resources[0].end = addr + 0x30f; - - smc91x_resources[1].start = gpio_to_irq(gpio); - smc91x_resources[1].end = gpio_to_irq(gpio); - - status = gpio_request(gpio, "SMC91x irq"); - if (status < 0) { - printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio); - return status; - } - gpio_direction_input(gpio); - - led_resources[0].start = addr; - led_resources[0].end = addr + SZ_4K - 1; - - return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices)); -} diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h deleted file mode 100644 index 8fc4287222d..00000000000 --- a/arch/arm/plat-omap/include/plat/debug-devices.h +++ /dev/null @@ -1,2 +0,0 @@ -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c index bd5de08ad6f..0576a7dd32a 100644 --- a/drivers/amba/tegra-ahb.c +++ b/drivers/amba/tegra-ahb.c @@ -157,6 +157,7 @@ int tegra_ahb_enable_smmu(struct device_node *dn) EXPORT_SYMBOL(tegra_ahb_enable_smmu); #endif +#ifdef CONFIG_PM_SLEEP static int tegra_ahb_suspend(struct device *dev) { int i; @@ -176,6 +177,7 @@ static int tegra_ahb_resume(struct device *dev) gizmo_writel(ahb, ahb->ctx[i], tegra_ahb_gizmo[i]); return 0; } +#endif static UNIVERSAL_DEV_PM_OPS(tegra_ahb_pm, tegra_ahb_suspend, diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 770a0d01e0b..05164d7f054 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,7 +25,6 @@ #include <linux/dma-mapping.h> #include <linux/spinlock.h> #include <linux/gpio.h> -#include <plat/cpu.h> #include <linux/platform_device.h> #include <linux/platform_data/usb-omap.h> #include <linux/pm_runtime.h> @@ -384,7 +383,7 @@ static void omap_usbhs_init(struct device *dev) reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; /* Bypass the TLL module for PHY mode operation */ - if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { + if (pdata->single_ulpi_bypass) { dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); if (is_ehci_phy_mode(pdata->port_mode[0]) || is_ehci_phy_mode(pdata->port_mode[1]) || diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 23f797eb7a2..57d6b29c039 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -41,8 +41,7 @@ #include <linux/of.h> #include <linux/gpio.h> #include <linux/pinctrl/consumer.h> - -#include <plat/omap-serial.h> +#include <linux/platform_data/serial-omap.h> #define OMAP_MAX_HSUART_PORTS 6 diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/include/linux/platform_data/serial-omap.h index ff9b0aab528..ff9b0aab528 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/include/linux/platform_data/serial-omap.h diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h index 8570bcfe631..ef65b67c56c 100644 --- a/include/linux/platform_data/usb-omap.h +++ b/include/linux/platform_data/usb-omap.h @@ -59,6 +59,9 @@ struct usbhs_omap_platform_data { struct ehci_hcd_omap_platform_data *ehci_data; struct ohci_hcd_omap_platform_data *ohci_data; + + /* OMAP3 <= ES2.1 have a single ulpi bypass control bit */ + unsigned single_ulpi_bypass:1; }; /*-------------------------------------------------------------------------*/ diff --git a/include/video/omap-panel-tfp410.h b/include/video/omap-panel-tfp410.h index 68c31d79c57..aef35e48bc7 100644 --- a/include/video/omap-panel-tfp410.h +++ b/include/video/omap-panel-tfp410.h @@ -28,7 +28,7 @@ struct omap_dss_device; * @power_down_gpio: gpio number for PD pin (or -1 if not available) */ struct tfp410_platform_data { - u16 i2c_bus_num; + int i2c_bus_num; int power_down_gpio; }; |