diff options
-rw-r--r-- | drivers/firewire/Makefile | 1 | ||||
-rw-r--r-- | drivers/firewire/init_ohci1394_dma.c (renamed from drivers/ieee1394/init_ohci1394_dma.c) | 76 | ||||
-rw-r--r-- | drivers/ieee1394/Makefile | 2 |
3 files changed, 51 insertions, 28 deletions
diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile index 3c6a7fb20aa..e3870d5c43d 100644 --- a/drivers/firewire/Makefile +++ b/drivers/firewire/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o obj-$(CONFIG_FIREWIRE_NET) += firewire-net.o obj-$(CONFIG_FIREWIRE_NOSY) += nosy.o +obj-$(CONFIG_PROVIDE_OHCI1394_DMA_INIT) += init_ohci1394_dma.o diff --git a/drivers/ieee1394/init_ohci1394_dma.c b/drivers/firewire/init_ohci1394_dma.c index ddaab6eb8ac..a9a347adb35 100644 --- a/drivers/ieee1394/init_ohci1394_dma.c +++ b/drivers/firewire/init_ohci1394_dma.c @@ -32,23 +32,41 @@ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#include <linux/interrupt.h> /* for ohci1394.h */ #include <linux/delay.h> +#include <linux/io.h> +#include <linux/kernel.h> #include <linux/pci.h> /* for PCI defines */ -#include <linux/init_ohci1394_dma.h> +#include <linux/string.h> + #include <asm/pci-direct.h> /* for direct PCI config space access */ #include <asm/fixmap.h> -#include "ieee1394_types.h" -#include "ohci1394.h" +#include <linux/init_ohci1394_dma.h> +#include "ohci.h" int __initdata init_ohci1394_dma_early; +struct ohci { + void __iomem *registers; +}; + +static inline void reg_write(const struct ohci *ohci, int offset, u32 data) +{ + writel(data, ohci->registers + offset); +} + +static inline u32 reg_read(const struct ohci *ohci, int offset) +{ + return readl(ohci->registers + offset); +} + +#define OHCI_LOOP_COUNT 100 /* Number of loops for reg read waits */ + /* Reads a PHY register of an OHCI-1394 controller */ -static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr) +static inline u8 __init get_phy_reg(struct ohci *ohci, u8 addr) { int i; - quadlet_t r; + u32 r; reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000); @@ -63,22 +81,22 @@ static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr) } /* Writes to a PHY register of an OHCI-1394 controller */ -static inline void __init set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data) +static inline void __init set_phy_reg(struct ohci *ohci, u8 addr, u8 data) { int i; reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000); for (i = 0; i < OHCI_LOOP_COUNT; i++) { - u32 r = reg_read(ohci, OHCI1394_PhyControl); - if (!(r & 0x00004000)) + if (!(reg_read(ohci, OHCI1394_PhyControl) & 0x00004000)) break; mdelay(1); } } /* Resets an OHCI-1394 controller (for sane state before initialization) */ -static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) { +static inline void __init init_ohci1394_soft_reset(struct ohci *ohci) +{ int i; reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); @@ -91,10 +109,14 @@ static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) { } } +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf +#define OHCI1394_MAX_AT_RESP_RETRIES 0x2 +#define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 + /* Basic OHCI-1394 register and port inititalization */ -static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci) +static inline void __init init_ohci1394_initialize(struct ohci *ohci) { - quadlet_t bus_options; + u32 bus_options; int num_ports, i; /* Put some defaults to these undefined bus options */ @@ -116,7 +138,7 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci) /* enable phys */ reg_write(ohci, OHCI1394_LinkControlSet, - OHCI1394_LinkControl_RcvPhyPkt); + OHCI1394_LinkControl_rcvPhyPkt); /* Don't accept phy packets into AR request context */ reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400); @@ -128,7 +150,7 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci) reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); /* Accept asyncronous transfer requests from all nodes for now */ - reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000); + reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000); /* Specify asyncronous transfer retries */ reg_write(ohci, OHCI1394_ATRetries, @@ -137,7 +159,8 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci) (OHCI1394_MAX_PHYS_RESP_RETRIES<<8)); /* We don't want hardware swapping */ - reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap); + reg_write(ohci, OHCI1394_HCControlClear, + OHCI1394_HCControl_noByteSwapData); /* Enable link */ reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable); @@ -164,11 +187,11 @@ static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci) * has to be enabled after each bus reset when needed. We resort * to polling here because on early boot, we have no interrupts. */ -static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci) +static inline void __init init_ohci1394_wait_for_busresets(struct ohci *ohci) { int i, events; - for (i=0; i < 9; i++) { + for (i = 0; i < 9; i++) { mdelay(200); events = reg_read(ohci, OHCI1394_IntEventSet); if (events & OHCI1394_busReset) @@ -182,18 +205,18 @@ static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci) * This enables remote DMA access over IEEE1394 from every host for the low * 4GB of address space. DMA accesses above 4GB are not available currently. */ -static inline void __init init_ohci1394_enable_physical_dma(struct ti_ohci *hci) +static inline void __init init_ohci1394_enable_physical_dma(struct ohci *ohci) { - reg_write(hci, OHCI1394_PhyReqFilterHiSet, 0xffffffff); - reg_write(hci, OHCI1394_PhyReqFilterLoSet, 0xffffffff); - reg_write(hci, OHCI1394_PhyUpperBound, 0xffff0000); + reg_write(ohci, OHCI1394_PhyReqFilterHiSet, 0xffffffff); + reg_write(ohci, OHCI1394_PhyReqFilterLoSet, 0xffffffff); + reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000); } /** * init_ohci1394_reset_and_init_dma - init controller and enable DMA * This initializes the given controller and enables physical DMA engine in it. */ -static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci) +static inline void __init init_ohci1394_reset_and_init_dma(struct ohci *ohci) { /* Start off with a soft reset, clears everything to a sane state. */ init_ohci1394_soft_reset(ohci); @@ -225,7 +248,7 @@ static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci) static inline void __init init_ohci1394_controller(int num, int slot, int func) { unsigned long ohci_base; - struct ti_ohci ohci; + struct ohci ohci; printk(KERN_INFO "init_ohci1394_dma: initializing OHCI-1394" " at %02x:%02x.%x\n", num, slot, func); @@ -235,7 +258,7 @@ static inline void __init init_ohci1394_controller(int num, int slot, int func) set_fixmap_nocache(FIX_OHCI1394_BASE, ohci_base); - ohci.registers = (void *)fix_to_virt(FIX_OHCI1394_BASE); + ohci.registers = (void __iomem *)fix_to_virt(FIX_OHCI1394_BASE); init_ohci1394_reset_and_init_dma(&ohci); } @@ -247,6 +270,7 @@ static inline void __init init_ohci1394_controller(int num, int slot, int func) void __init init_ohci1394_dma_on_all_controllers(void) { int num, slot, func; + u32 class; if (!early_pci_allowed()) return; @@ -255,9 +279,9 @@ void __init init_ohci1394_dma_on_all_controllers(void) for (num = 0; num < 32; num++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { - u32 class = read_pci_config(num,slot,func, + class = read_pci_config(num, slot, func, PCI_CLASS_REVISION); - if ((class == 0xffffffff)) + if (class == 0xffffffff) continue; /* No device at this func */ if (class>>8 != PCI_CLASS_SERIAL_FIREWIRE_OHCI) diff --git a/drivers/ieee1394/Makefile b/drivers/ieee1394/Makefile index 1f8153b5750..427b86b8776 100644 --- a/drivers/ieee1394/Makefile +++ b/drivers/ieee1394/Makefile @@ -14,5 +14,3 @@ obj-$(CONFIG_IEEE1394_RAWIO) += raw1394.o obj-$(CONFIG_IEEE1394_SBP2) += sbp2.o obj-$(CONFIG_IEEE1394_DV1394) += dv1394.o obj-$(CONFIG_IEEE1394_ETH1394) += eth1394.o - -obj-$(CONFIG_PROVIDE_OHCI1394_DMA_INIT) += init_ohci1394_dma.o |