diff options
103 files changed, 9128 insertions, 1772 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 801829dee74..cf8fd458974 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2057,9 +2057,10 @@ L: linux-kernel@vger.kernel.org S: Maintained NI5010 NETWORK DRIVER -P: Jan-Pascal van Best and Andreas Mohr -M: Jan-Pascal van Best <jvbest@qv3pluto.leidenuniv.nl> -M: Andreas Mohr <100.30936@germany.net> +P: Jan-Pascal van Best +M: janpascal@vanbest.org +P: Andreas Mohr +M: andi@lisas.de L: netdev@vger.kernel.org S: Maintained @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 -SUBLEVEL = 17 -EXTRAVERSION = +SUBLEVEL = 18 +EXTRAVERSION = -rc1 NAME=Crazed Snow-Weasel # *DOCUMENTATION* @@ -528,7 +528,7 @@ export MODLIB ifdef INSTALL_MOD_STRIP ifeq ($(INSTALL_MOD_STRIP),1) -mod_strip_cmd = $STRIP) --strip-debug +mod_strip_cmd = $(STRIP) --strip-debug else mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) endif # INSTALL_MOD_STRIP=1 diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91rm9200/at91rm9200.c index 7e1d072bdd8..0985b1c42c7 100644 --- a/arch/arm/mach-at91rm9200/at91rm9200.c +++ b/arch/arm/mach-at91rm9200/at91rm9200.c @@ -107,3 +107,48 @@ void __init at91rm9200_map_io(void) iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } +/* + * The default interrupt priority levels (0 = lowest, 7 = highest). + */ +static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { + 7, /* Advanced Interrupt Controller (FIQ) */ + 7, /* System Peripherals */ + 0, /* Parallel IO Controller A */ + 0, /* Parallel IO Controller B */ + 0, /* Parallel IO Controller C */ + 0, /* Parallel IO Controller D */ + 6, /* USART 0 */ + 6, /* USART 1 */ + 6, /* USART 2 */ + 6, /* USART 3 */ + 0, /* Multimedia Card Interface */ + 4, /* USB Device Port */ + 0, /* Two-Wire Interface */ + 6, /* Serial Peripheral Interface */ + 5, /* Serial Synchronous Controller 0 */ + 5, /* Serial Synchronous Controller 1 */ + 5, /* Serial Synchronous Controller 2 */ + 0, /* Timer Counter 0 */ + 0, /* Timer Counter 1 */ + 0, /* Timer Counter 2 */ + 0, /* Timer Counter 3 */ + 0, /* Timer Counter 4 */ + 0, /* Timer Counter 5 */ + 3, /* USB Host port */ + 3, /* Ethernet MAC */ + 0, /* Advanced Interrupt Controller (IRQ0) */ + 0, /* Advanced Interrupt Controller (IRQ1) */ + 0, /* Advanced Interrupt Controller (IRQ2) */ + 0, /* Advanced Interrupt Controller (IRQ3) */ + 0, /* Advanced Interrupt Controller (IRQ4) */ + 0, /* Advanced Interrupt Controller (IRQ5) */ + 0 /* Advanced Interrupt Controller (IRQ6) */ +}; + +void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS]) +{ + if (!priority) + priority = at91rm9200_default_irq_priority; + + at91_aic_init(priority); +} diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91rm9200/generic.h index f0d969d7d87..7979d8ab7e0 100644 --- a/arch/arm/mach-at91rm9200/generic.h +++ b/arch/arm/mach-at91rm9200/generic.h @@ -8,13 +8,19 @@ * published by the Free Software Foundation. */ -void at91_gpio_irq_setup(unsigned banks); + /* Interrupts */ +extern void __init at91rm9200_init_irq(unsigned int priority[]); +extern void __init at91_aic_init(unsigned int priority[]); +extern void __init at91_gpio_irq_setup(unsigned banks); + /* Timer */ struct sys_timer; extern struct sys_timer at91rm9200_timer; + /* Memory Map */ extern void __init at91rm9200_map_io(void); + /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); struct device; extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func); diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91rm9200/irq.c index dcd560dbcfb..9b091132041 100644 --- a/arch/arm/mach-at91rm9200/irq.c +++ b/arch/arm/mach-at91rm9200/irq.c @@ -36,58 +36,20 @@ #include "generic.h" -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripheral */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 0, /* Parallel IO Controller D */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 6, /* USART 3 */ - 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface */ - 6, /* Serial Peripheral Interface */ - 5, /* Serial Synchronous Controller */ - 5, /* Serial Synchronous Controller */ - 5, /* Serial Synchronous Controller */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ - 3, /* USB Host port */ - 3, /* Ethernet MAC */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0 /* Advanced Interrupt Controller */ -}; - -static void at91rm9200_mask_irq(unsigned int irq) +static void at91_aic_mask_irq(unsigned int irq) { /* Disable interrupt on AIC */ at91_sys_write(AT91_AIC_IDCR, 1 << irq); } -static void at91rm9200_unmask_irq(unsigned int irq) +static void at91_aic_unmask_irq(unsigned int irq) { /* Enable interrupt on AIC */ at91_sys_write(AT91_AIC_IECR, 1 << irq); } -static int at91rm9200_irq_type(unsigned irq, unsigned type) +static int at91_aic_set_type(unsigned irq, unsigned type) { unsigned int smr, srctype; @@ -122,7 +84,7 @@ static int at91rm9200_irq_type(unsigned irq, unsigned type) static u32 wakeups; static u32 backups; -static int at91rm9200_irq_set_wake(unsigned irq, unsigned value) +static int at91_aic_set_wake(unsigned irq, unsigned value) { if (unlikely(irq >= 32)) return -EINVAL; @@ -149,28 +111,24 @@ void at91_irq_resume(void) } #else -#define at91rm9200_irq_set_wake NULL +#define at91_aic_set_wake NULL #endif -static struct irqchip at91rm9200_irq_chip = { - .ack = at91rm9200_mask_irq, - .mask = at91rm9200_mask_irq, - .unmask = at91rm9200_unmask_irq, - .set_type = at91rm9200_irq_type, - .set_wake = at91rm9200_irq_set_wake, +static struct irqchip at91_aic_chip = { + .ack = at91_aic_mask_irq, + .mask = at91_aic_mask_irq, + .unmask = at91_aic_unmask_irq, + .set_type = at91_aic_set_type, + .set_wake = at91_aic_set_wake, }; /* * Initialize the AIC interrupt controller. */ -void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS]) +void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) { unsigned int i; - /* No priority list specified for this board -> use defaults */ - if (priority == NULL) - priority = at91rm9200_default_irq_priority; - /* * The IVR is used by macro get_irqnr_and_base to read and verify. * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. @@ -178,10 +136,10 @@ void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS]) for (i = 0; i < NR_AIC_IRQS; i++) { /* Put irq number in Source Vector Register: */ at91_sys_write(AT91_AIC_SVR(i), i); - /* Store the Source Mode Register as defined in table above */ + /* Active Low interrupt, with the specified priority */ at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); - set_irq_chip(i, &at91rm9200_irq_chip); + set_irq_chip(i, &at91_aic_chip); set_irq_handler(i, do_level_IRQ); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c index ba91daad64f..3d73c1e9375 100644 --- a/arch/arm/mach-pnx4008/core.c +++ b/arch/arm/mach-pnx4008/core.c @@ -27,7 +27,6 @@ #include <linux/spi/spi.h> #include <asm/hardware.h> -#include <asm/irq.h> #include <asm/io.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -36,7 +35,6 @@ #include <asm/system.h> #include <asm/mach/arch.h> -#include <asm/mach/irq.h> #include <asm/mach/map.h> #include <asm/mach/time.h> diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c index 981aa9dcded..ec01574f88a 100644 --- a/arch/arm/mach-pnx4008/dma.c +++ b/arch/arm/mach-pnx4008/dma.c @@ -23,7 +23,6 @@ #include <linux/clk.h> #include <asm/system.h> -#include <asm/irq.h> #include <asm/hardware.h> #include <asm/dma.h> #include <asm/dma-mapping.h> diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 9b0a8e084e9..3a4bcf3d91f 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -22,8 +22,8 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/device.h> +#include <linux/irq.h> #include <asm/hardware.h> -#include <asm/irq.h> #include <asm/io.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -96,26 +96,24 @@ void __init pnx4008_init_irq(void) { unsigned int i; - /* configure and enable IRQ 0,1,30,31 (cascade interrupts) mask all others */ + /* configure IRQ's */ + for (i = 0; i < NR_IRQS; i++) { + set_irq_flags(i, IRQF_VALID); + set_irq_chip(i, &pnx4008_irq_chip); + pnx4008_set_irq_type(i, pnx4008_irq_type[i]); + } + + /* configure and enable IRQ 0,1,30,31 (cascade interrupts) */ pnx4008_set_irq_type(SUB1_IRQ_N, pnx4008_irq_type[SUB1_IRQ_N]); pnx4008_set_irq_type(SUB2_IRQ_N, pnx4008_irq_type[SUB2_IRQ_N]); pnx4008_set_irq_type(SUB1_FIQ_N, pnx4008_irq_type[SUB1_FIQ_N]); pnx4008_set_irq_type(SUB2_FIQ_N, pnx4008_irq_type[SUB2_FIQ_N]); + /* mask all others */ __raw_writel((1 << SUB2_FIQ_N) | (1 << SUB1_FIQ_N) | (1 << SUB2_IRQ_N) | (1 << SUB1_IRQ_N), INTC_ER(MAIN_BASE_INT)); __raw_writel(0, INTC_ER(SIC1_BASE_INT)); __raw_writel(0, INTC_ER(SIC2_BASE_INT)); - - /* configure all other IRQ's */ - for (i = 0; i < NR_IRQS; i++) { - if (i == SUB2_FIQ_N || i == SUB1_FIQ_N || - i == SUB2_IRQ_N || i == SUB1_IRQ_N) - continue; - set_irq_flags(i, IRQF_VALID); - set_irq_chip(i, &pnx4008_irq_chip); - pnx4008_set_irq_type(i, pnx4008_irq_type[i]); - } } diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c index 888bf6cfba8..756228ddd03 100644 --- a/arch/arm/mach-pnx4008/time.c +++ b/arch/arm/mach-pnx4008/time.c @@ -20,17 +20,15 @@ #include <linux/spinlock.h> #include <linux/module.h> #include <linux/kallsyms.h> +#include <linux/time.h> +#include <linux/timex.h> +#include <linux/irq.h> #include <asm/system.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/leds.h> -#include <asm/irq.h> -#include <asm/mach/irq.h> #include <asm/mach/time.h> - -#include <linux/time.h> -#include <linux/timex.h> #include <asm/errno.h> /*! Note: all timers are UPCOUNTING */ diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 7d31d7cc392..9cecebaa036 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -405,20 +405,22 @@ static void mpic_unmask_irq(unsigned int irq) unsigned int loops = 100000; struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); + unsigned long flags; DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src); + spin_lock_irqsave(&mpic_lock, flags); mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & ~MPIC_VECPRI_MASK); - /* make sure mask gets to controller before we return to user */ do { if (!loops--) { printk(KERN_ERR "mpic_enable_irq timeout\n"); break; } - } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK); + } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK); + spin_unlock_irqrestore(&mpic_lock, flags); } static void mpic_mask_irq(unsigned int irq) @@ -426,9 +428,11 @@ static void mpic_mask_irq(unsigned int irq) unsigned int loops = 100000; struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); + unsigned long flags; DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src); + spin_lock_irqsave(&mpic_lock, flags); mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | MPIC_VECPRI_MASK); @@ -440,6 +444,7 @@ static void mpic_mask_irq(unsigned int irq) break; } } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK)); + spin_unlock_irqrestore(&mpic_lock, flags); } static void mpic_end_irq(unsigned int irq) @@ -624,9 +629,10 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, struct irq_desc *desc = get_irq_desc(virq); struct irq_chip *chip; struct mpic *mpic = h->host_data; - unsigned int vecpri = MPIC_VECPRI_SENSE_LEVEL | + u32 v, vecpri = MPIC_VECPRI_SENSE_LEVEL | MPIC_VECPRI_POLARITY_NEGATIVE; int level; + unsigned long iflags; pr_debug("mpic: map virq %d, hwirq 0x%lx, flags: 0x%x\n", virq, hw, flags); @@ -668,11 +674,21 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, } #endif - /* Reconfigure irq */ - vecpri |= MPIC_VECPRI_MASK | hw | (8 << MPIC_VECPRI_PRIORITY_SHIFT); - mpic_irq_write(hw, MPIC_IRQ_VECTOR_PRI, vecpri); - - pr_debug("mpic: mapping as IRQ\n"); + /* Reconfigure irq. We must preserve the mask bit as we can be called + * while the interrupt is still active (This may change in the future + * but for now, it is the case). + */ + spin_lock_irqsave(&mpic_lock, iflags); + v = mpic_irq_read(hw, MPIC_IRQ_VECTOR_PRI); + vecpri = (v & + ~(MPIC_VECPRI_POLARITY_MASK | MPIC_VECPRI_SENSE_MASK)) | + vecpri; + if (vecpri != v) + mpic_irq_write(hw, MPIC_IRQ_VECTOR_PRI, vecpri); + spin_unlock_irqrestore(&mpic_lock, iflags); + + pr_debug("mpic: mapping as IRQ, vecpri = 0x%08x (was 0x%08x)\n", + vecpri, v); set_irq_chip_data(virq, mpic); set_irq_chip_and_handler(virq, chip, handle_fasteoi_irq); @@ -904,8 +920,8 @@ void __init mpic_init(struct mpic *mpic) /* do senses munging */ if (mpic->senses && i < mpic->senses_count) - vecpri = mpic_flags_to_vecpri(mpic->senses[i], - &level); + vecpri |= mpic_flags_to_vecpri(mpic->senses[i], + &level); else vecpri |= MPIC_VECPRI_SENSE_LEVEL; @@ -955,14 +971,17 @@ void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) void __init mpic_set_serial_int(struct mpic *mpic, int enable) { + unsigned long flags; u32 v; + spin_lock_irqsave(&mpic_lock, flags); v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); if (enable) v |= MPIC_GREG_GLOBAL_CONF_1_SIE; else v &= ~MPIC_GREG_GLOBAL_CONF_1_SIE; mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); + spin_unlock_irqrestore(&mpic_lock, flags); } void mpic_irq_set_priority(unsigned int irq, unsigned int pri) diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index fa484d4f241..99daeee4209 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -1032,7 +1032,9 @@ static void sun4v_vdev_irq_trans_init(struct device_node *dp) static void irq_trans_init(struct device_node *dp) { const char *model; +#ifdef CONFIG_PCI int i; +#endif model = of_get_property(dp, "model", NULL); if (!model) diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 4173de425f0..237524d87ca 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -124,11 +124,6 @@ EXPORT_SYMBOL(__write_lock); EXPORT_SYMBOL(__write_unlock); EXPORT_SYMBOL(__write_trylock); -#if defined(CONFIG_MCOUNT) -extern void _mcount(void); -EXPORT_SYMBOL(_mcount); -#endif - /* CPU online map and active count. */ EXPORT_SYMBOL(cpu_online_map); EXPORT_SYMBOL(phys_cpu_present_map); @@ -136,6 +131,11 @@ EXPORT_SYMBOL(phys_cpu_present_map); EXPORT_SYMBOL(smp_call_function); #endif /* CONFIG_SMP */ +#if defined(CONFIG_MCOUNT) +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif + EXPORT_SYMBOL(sparc64_get_clock_tick); /* semaphores */ diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 8dcbfbffacc..b43de647ba7 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -788,12 +788,15 @@ static int __devinit clock_probe(struct of_device *op, const struct of_device_id if (!regs) return -ENOMEM; +#ifdef CONFIG_PCI if (!strcmp(model, "ds1287") || !strcmp(model, "m5819") || !strcmp(model, "m5819p") || !strcmp(model, "m5823")) { ds1287_regs = (unsigned long) regs; - } else if (model[5] == '0' && model[6] == '2') { + } else +#endif + if (model[5] == '0' && model[6] == '2') { mstk48t02_regs = regs; } else if(model[5] == '0' && model[6] == '8') { mstk48t08_regs = regs; diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index 1959654cbec..d2150baa7e3 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -1836,9 +1836,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (pdev->vendor == PCI_VENDOR_ID_REALTEK && pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) { - printk(KERN_ERR PFX "pci dev %s (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n", - pci_name(pdev), pdev->vendor, pdev->device, pci_rev); - printk(KERN_ERR PFX "Try the \"8139too\" driver instead.\n"); + dev_err(&pdev->dev, + "This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n", + pdev->vendor, pdev->device, pci_rev); + dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n"); return -ENODEV; } @@ -1876,14 +1877,13 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pciaddr = pci_resource_start(pdev, 1); if (!pciaddr) { rc = -EIO; - printk(KERN_ERR PFX "no MMIO resource for pci dev %s\n", - pci_name(pdev)); + dev_err(&pdev->dev, "no MMIO resource\n"); goto err_out_res; } if (pci_resource_len(pdev, 1) < CP_REGS_SIZE) { rc = -EIO; - printk(KERN_ERR PFX "MMIO resource (%llx) too small on pci dev %s\n", - (unsigned long long)pci_resource_len(pdev, 1), pci_name(pdev)); + dev_err(&pdev->dev, "MMIO resource (%llx) too small\n", + (unsigned long long)pci_resource_len(pdev, 1)); goto err_out_res; } @@ -1897,14 +1897,15 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR PFX "No usable DMA configuration, " - "aborting.\n"); + dev_err(&pdev->dev, + "No usable DMA configuration, aborting.\n"); goto err_out_res; } rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); if (rc) { - printk(KERN_ERR PFX "No usable consistent DMA configuration, " - "aborting.\n"); + dev_err(&pdev->dev, + "No usable consistent DMA configuration, " + "aborting.\n"); goto err_out_res; } } @@ -1915,9 +1916,9 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) regs = ioremap(pciaddr, CP_REGS_SIZE); if (!regs) { rc = -EIO; - printk(KERN_ERR PFX "Cannot map PCI MMIO (%llx@%llx) on pci dev %s\n", - (unsigned long long)pci_resource_len(pdev, 1), - (unsigned long long)pciaddr, pci_name(pdev)); + dev_err(&pdev->dev, "Cannot map PCI MMIO (%lx@%lx)\n", + (unsigned long long)pci_resource_len(pdev, 1), + (unsigned long long)pciaddr); goto err_out_res; } dev->base_addr = (unsigned long) regs; @@ -1986,7 +1987,8 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) /* enable busmastering and memory-write-invalidate */ pci_set_master(pdev); - if (cp->wol_enabled) cp_set_d3_state (cp); + if (cp->wol_enabled) + cp_set_d3_state (cp); return 0; @@ -2011,7 +2013,8 @@ static void cp_remove_one (struct pci_dev *pdev) BUG_ON(!dev); unregister_netdev(dev); iounmap(cp->regs); - if (cp->wol_enabled) pci_set_power_state (pdev, PCI_D0); + if (cp->wol_enabled) + pci_set_power_state (pdev, PCI_D0); pci_release_regions(pdev); pci_clear_mwi(pdev); pci_disable_device(pdev); diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 717506b2b13..cd9718512d1 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -768,7 +768,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* dev and priv zeroed in alloc_etherdev */ dev = alloc_etherdev (sizeof (*tp)); if (dev == NULL) { - printk (KERN_ERR PFX "%s: Unable to alloc new net device\n", pci_name(pdev)); + dev_err(&pdev->dev, "Unable to alloc new net device\n"); return -ENOMEM; } SET_MODULE_OWNER(dev); @@ -800,31 +800,31 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, #ifdef USE_IO_OPS /* make sure PCI base addr 0 is PIO */ if (!(pio_flags & IORESOURCE_IO)) { - printk (KERN_ERR PFX "%s: region #0 not a PIO resource, aborting\n", pci_name(pdev)); + dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n"); rc = -ENODEV; goto err_out; } /* check for weird/broken PCI region reporting */ if (pio_len < RTL_MIN_IO_SIZE) { - printk (KERN_ERR PFX "%s: Invalid PCI I/O region size(s), aborting\n", pci_name(pdev)); + dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n"); rc = -ENODEV; goto err_out; } #else /* make sure PCI base addr 1 is MMIO */ if (!(mmio_flags & IORESOURCE_MEM)) { - printk (KERN_ERR PFX "%s: region #1 not an MMIO resource, aborting\n", pci_name(pdev)); + dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n"); rc = -ENODEV; goto err_out; } if (mmio_len < RTL_MIN_IO_SIZE) { - printk (KERN_ERR PFX "%s: Invalid PCI mem region size(s), aborting\n", pci_name(pdev)); + dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n"); rc = -ENODEV; goto err_out; } #endif - rc = pci_request_regions (pdev, "8139too"); + rc = pci_request_regions (pdev, DRV_NAME); if (rc) goto err_out; disable_dev_on_err = 1; @@ -835,7 +835,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, #ifdef USE_IO_OPS ioaddr = ioport_map(pio_start, pio_len); if (!ioaddr) { - printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev)); + dev_err(&pdev->dev, "cannot map PIO, aborting\n"); rc = -EIO; goto err_out; } @@ -846,7 +846,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* ioremap MMIO region */ ioaddr = pci_iomap(pdev, 1, 0); if (ioaddr == NULL) { - printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev)); + dev_err(&pdev->dev, "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out; } @@ -860,8 +860,7 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, /* check for missing/broken hardware */ if (RTL_R32 (TxConfig) == 0xFFFFFFFF) { - printk (KERN_ERR PFX "%s: Chip not responding, ignoring board\n", - pci_name(pdev)); + dev_err(&pdev->dev, "Chip not responding, ignoring board\n"); rc = -EIO; goto err_out; } @@ -875,9 +874,10 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, } /* if unknown chip, assume array element #0, original RTL-8139 in this case */ - printk (KERN_DEBUG PFX "%s: unknown chip version, assuming RTL-8139\n", - pci_name(pdev)); - printk (KERN_DEBUG PFX "%s: TxConfig = 0x%lx\n", pci_name(pdev), RTL_R32 (TxConfig)); + dev_printk (KERN_DEBUG, &pdev->dev, + "unknown chip version, assuming RTL-8139\n"); + dev_printk (KERN_DEBUG, &pdev->dev, + "TxConfig = 0x%lx\n", RTL_R32 (TxConfig)); tp->chipset = 0; match: @@ -954,9 +954,11 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, if (pdev->vendor == PCI_VENDOR_ID_REALTEK && pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) { - printk(KERN_INFO PFX "pci dev %s (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n", - pci_name(pdev), pdev->vendor, pdev->device, pci_rev); - printk(KERN_INFO PFX "Use the \"8139cp\" driver for improved performance and stability.\n"); + dev_info(&pdev->dev, + "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n", + pdev->vendor, pdev->device, pci_rev); + dev_info(&pdev->dev, + "Use the \"8139cp\" driver for improved performance and stability.\n"); } i = rtl8139_init_board (pdev, &dev); diff --git a/drivers/net/b44.c b/drivers/net/b44.c index cd98d31dee8..bea0fc0ede2 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -2120,13 +2120,14 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device, " + dev_err(&pdev->dev, "Cannot enable PCI device, " "aborting.\n"); return err; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "Cannot find proper PCI device " + dev_err(&pdev->dev, + "Cannot find proper PCI device " "base address, aborting.\n"); err = -ENODEV; goto err_out_disable_pdev; @@ -2134,8 +2135,8 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_request_regions(pdev, DRV_MODULE_NAME); if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources, " - "aborting.\n"); + dev_err(&pdev->dev, + "Cannot obtain PCI resources, aborting.\n"); goto err_out_disable_pdev; } @@ -2143,15 +2144,13 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK); if (err) { - printk(KERN_ERR PFX "No usable DMA configuration, " - "aborting.\n"); + dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); goto err_out_free_res; } err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK); if (err) { - printk(KERN_ERR PFX "No usable DMA configuration, " - "aborting.\n"); + dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); goto err_out_free_res; } @@ -2160,7 +2159,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, dev = alloc_etherdev(sizeof(*bp)); if (!dev) { - printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n"); + dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n"); err = -ENOMEM; goto err_out_free_res; } @@ -2181,8 +2180,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, bp->regs = ioremap(b44reg_base, b44reg_len); if (bp->regs == 0UL) { - printk(KERN_ERR PFX "Cannot map device registers, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot map device registers, aborting.\n"); err = -ENOMEM; goto err_out_free_dev; } @@ -2212,8 +2210,8 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = b44_get_invariants(bp); if (err) { - printk(KERN_ERR PFX "Problem fetching invariants of chip, " - "aborting.\n"); + dev_err(&pdev->dev, + "Problem fetching invariants of chip, aborting.\n"); goto err_out_iounmap; } @@ -2233,8 +2231,7 @@ static int __devinit b44_init_one(struct pci_dev *pdev, err = register_netdev(dev); if (err) { - printk(KERN_ERR PFX "Cannot register net device, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); goto err_out_iounmap; } diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4f4db5ae503..64b6a72b4f6 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -5575,20 +5575,20 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) /* enable device (incl. PCI PM wakeup), and bus-mastering */ rc = pci_enable_device(pdev); if (rc) { - printk(KERN_ERR PFX "Cannot enable PCI device, aborting."); + dev_err(&pdev->dev, "Cannot enable PCI device, aborting."); goto err_out; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "Cannot find PCI device base address, " - "aborting.\n"); + dev_err(&pdev->dev, + "Cannot find PCI device base address, aborting.\n"); rc = -ENODEV; goto err_out_disable; } rc = pci_request_regions(pdev, DRV_MODULE_NAME); if (rc) { - printk(KERN_ERR PFX "Cannot obtain PCI resources, aborting.\n"); + dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n"); goto err_out_disable; } @@ -5596,15 +5596,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); if (bp->pm_cap == 0) { - printk(KERN_ERR PFX "Cannot find power management capability, " - "aborting.\n"); + dev_err(&pdev->dev, + "Cannot find power management capability, aborting.\n"); rc = -EIO; goto err_out_release; } bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); if (bp->pcix_cap == 0) { - printk(KERN_ERR PFX "Cannot find PCIX capability, aborting.\n"); + dev_err(&pdev->dev, "Cannot find PCIX capability, aborting.\n"); rc = -EIO; goto err_out_release; } @@ -5612,14 +5612,14 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) { bp->flags |= USING_DAC_FLAG; if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) { - printk(KERN_ERR PFX "pci_set_consistent_dma_mask " - "failed, aborting.\n"); + dev_err(&pdev->dev, + "pci_set_consistent_dma_mask failed, aborting.\n"); rc = -EIO; goto err_out_release; } } else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) { - printk(KERN_ERR PFX "System does not support DMA, aborting.\n"); + dev_err(&pdev->dev, "System does not support DMA, aborting.\n"); rc = -EIO; goto err_out_release; } @@ -5639,7 +5639,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->regview = ioremap_nocache(dev->base_addr, mem_len); if (!bp->regview) { - printk(KERN_ERR PFX "Cannot map register space, aborting.\n"); + dev_err(&pdev->dev, "Cannot map register space, aborting.\n"); rc = -ENOMEM; goto err_out_release; } @@ -5711,8 +5711,8 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) && !(bp->flags & PCIX_FLAG)) { - printk(KERN_ERR PFX "5706 A1 can only be used in a PCIX bus, " - "aborting.\n"); + dev_err(&pdev->dev, + "5706 A1 can only be used in a PCIX bus, aborting.\n"); goto err_out_unmap; } @@ -5733,7 +5733,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != BNX2_DEV_INFO_SIGNATURE_MAGIC) { - printk(KERN_ERR PFX "Firmware not running, aborting.\n"); + dev_err(&pdev->dev, "Firmware not running, aborting.\n"); rc = -ENODEV; goto err_out_unmap; } @@ -5895,7 +5895,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) #endif if ((rc = register_netdev(dev))) { - printk(KERN_ERR PFX "Cannot register net device\n"); + dev_err(&pdev->dev, "Cannot register net device\n"); if (bp->regview) iounmap(bp->regview); pci_release_regions(pdev); diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index d33130f6470..a31544ccb3c 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4887,13 +4887,12 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_enable_device(pdev); if (err) { - printk(KERN_ERR PFX "Cannot enable PCI device, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n"); return err; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX "Cannot find proper PCI device " + dev_err(&pdev->dev, "Cannot find proper PCI device " "base address, aborting.\n"); err = -ENODEV; goto err_out_disable_pdev; @@ -4901,7 +4900,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, dev = alloc_etherdev(sizeof(*cp)); if (!dev) { - printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n"); + dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n"); err = -ENOMEM; goto err_out_disable_pdev; } @@ -4910,8 +4909,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_request_regions(pdev, dev->name); if (err) { - printk(KERN_ERR PFX "Cannot obtain PCI resources, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n"); goto err_out_free_netdev; } pci_set_master(pdev); @@ -4941,7 +4939,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, if (pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, cas_cacheline_size)) { - printk(KERN_ERR PFX "Could not set PCI cache " + dev_err(&pdev->dev, "Could not set PCI cache " "line size\n"); goto err_write_cacheline; } @@ -4955,7 +4953,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); if (err < 0) { - printk(KERN_ERR PFX "Unable to obtain 64-bit DMA " + dev_err(&pdev->dev, "Unable to obtain 64-bit DMA " "for consistent allocations\n"); goto err_out_free_res; } @@ -4963,7 +4961,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, } else { err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (err) { - printk(KERN_ERR PFX "No usable DMA configuration, " + dev_err(&pdev->dev, "No usable DMA configuration, " "aborting.\n"); goto err_out_free_res; } @@ -5023,8 +5021,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, /* give us access to cassini registers */ cp->regs = pci_iomap(pdev, 0, casreg_len); if (cp->regs == 0UL) { - printk(KERN_ERR PFX "Cannot map device registers, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot map device registers, aborting.\n"); goto err_out_free_res; } cp->casreg_len = casreg_len; @@ -5040,8 +5037,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, pci_alloc_consistent(pdev, sizeof(struct cas_init_block), &cp->block_dvma); if (!cp->init_block) { - printk(KERN_ERR PFX "Cannot allocate init block, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot allocate init block, aborting.\n"); goto err_out_iounmap; } @@ -5085,8 +5081,7 @@ static int __devinit cas_init_one(struct pci_dev *pdev, dev->features |= NETIF_F_HIGHDMA; if (register_netdev(dev)) { - printk(KERN_ERR PFX "Cannot register net device, " - "aborting.\n"); + dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); goto err_out_free_consistent; } diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 2038ca7e49c..6ad5796121c 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -703,8 +703,8 @@ static irqreturn_t lance_dma_merr_int(const int irq, void *dev_id, return IRQ_HANDLED; } -static irqreturn_t -lance_interrupt(const int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t lance_interrupt(const int irq, void *dev_id, + struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; struct lance_private *lp = netdev_priv(dev); @@ -1253,7 +1253,7 @@ static int __init dec_lance_init(const int type, const int slot) return 0; err_out_free_dev: - kfree(dev); + free_netdev(dev); err_out: return ret; @@ -1299,6 +1299,7 @@ static void __exit dec_lance_cleanup(void) while (root_lance_dev) { struct net_device *dev = root_lance_dev; struct lance_private *lp = netdev_priv(dev); + unregister_netdev(dev); #ifdef CONFIG_TC if (lp->slot >= 0) diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 4b6ddb70f92..402961e68c8 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -9,49 +9,10 @@ the Free Software Foundation; either version 2 of the License, or (at your option) any later version. */ -/* - Rev Date Description - ========================================================================== - 0.01 2001/05/03 Created DL2000-based linux driver - 0.02 2001/05/21 Added VLAN and hardware checksum support. - 1.00 2001/06/26 Added jumbo frame support. - 1.01 2001/08/21 Added two parameters, rx_coalesce and rx_timeout. - 1.02 2001/10/08 Supported fiber media. - Added flow control parameters. - 1.03 2001/10/12 Changed the default media to 1000mbps_fd for - the fiber devices. - 1.04 2001/11/08 Fixed Tx stopped when tx very busy. - 1.05 2001/11/22 Fixed Tx stopped when unidirectional tx busy. - 1.06 2001/12/13 Fixed disconnect bug at 10Mbps mode. - Fixed tx_full flag incorrect. - Added tx_coalesce paramter. - 1.07 2002/01/03 Fixed miscount of RX frame error. - 1.08 2002/01/17 Fixed the multicast bug. - 1.09 2002/03/07 Move rx-poll-now to re-fill loop. - Added rio_timer() to watch rx buffers. - 1.10 2002/04/16 Fixed miscount of carrier error. - 1.11 2002/05/23 Added ISR schedule scheme - Fixed miscount of rx frame error for DGE-550SX. - Fixed VLAN bug. - 1.12 2002/06/13 Lock tx_coalesce=1 on 10/100Mbps mode. - 1.13 2002/08/13 1. Fix disconnection (many tx:carrier/rx:frame - errs) with some mainboards. - 2. Use definition "DRV_NAME" "DRV_VERSION" - "DRV_RELDATE" for flexibility. - 1.14 2002/08/14 Support ethtool. - 1.15 2002/08/27 Changed the default media to Auto-Negotiation - for the fiber devices. - 1.16 2002/09/04 More power down time for fiber devices auto- - negotiation. - Fix disconnect bug after ifup and ifdown. - 1.17 2002/10/03 Fix RMON statistics overflow. - Always use I/O mapping to access eeprom, - avoid system freezing with some chipsets. -*/ #define DRV_NAME "D-Link DL2000-based linux driver" -#define DRV_VERSION "v1.17b" -#define DRV_RELDATE "2006/03/10" +#define DRV_VERSION "v1.18" +#define DRV_RELDATE "2006/06/27" #include "dl2k.h" #include <linux/dma-mapping.h> diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c index 2ad32754292..e445988c92e 100644 --- a/drivers/net/eepro100.c +++ b/drivers/net/eepro100.c @@ -555,12 +555,12 @@ static int __devinit eepro100_init_one (struct pci_dev *pdev, if (!request_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1), "eepro100")) { - printk (KERN_ERR "eepro100: cannot reserve I/O ports\n"); + dev_err(&pdev->dev, "eepro100: cannot reserve I/O ports\n"); goto err_out_none; } if (!request_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0), "eepro100")) { - printk (KERN_ERR "eepro100: cannot reserve MMIO region\n"); + dev_err(&pdev->dev, "eepro100: cannot reserve MMIO region\n"); goto err_out_free_pio_region; } @@ -573,7 +573,7 @@ static int __devinit eepro100_init_one (struct pci_dev *pdev, ioaddr = pci_iomap(pdev, pci_bar, 0); if (!ioaddr) { - printk (KERN_ERR "eepro100: cannot remap IO\n"); + dev_err(&pdev->dev, "eepro100: cannot remap IO\n"); goto err_out_free_mmio_region; } diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 9f3e09a3d88..a67650ccf08 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -19,62 +19,15 @@ Information and updates available at http://www.scyld.com/network/epic100.html + [this link no longer provides anything useful -jgarzik] --------------------------------------------------------------------- - Linux kernel-specific changes: - - LK1.1.2 (jgarzik): - * Merge becker version 1.09 (4/08/2000) - - LK1.1.3: - * Major bugfix to 1.09 driver (Francis Romieu) - - LK1.1.4 (jgarzik): - * Merge becker test version 1.09 (5/29/2000) - - LK1.1.5: - * Fix locking (jgarzik) - * Limit 83c175 probe to ethernet-class PCI devices (rgooch) - - LK1.1.6: - * Merge becker version 1.11 - * Move pci_enable_device before any PCI BAR len checks - - LK1.1.7: - * { fill me in } - - LK1.1.8: - * ethtool driver info support (jgarzik) - - LK1.1.9: - * ethtool media get/set support (jgarzik) - - LK1.1.10: - * revert MII transceiver init change (jgarzik) - - LK1.1.11: - * implement ETHTOOL_[GS]SET, _NWAY_RST, _[GS]MSGLVL, _GLINK (jgarzik) - * replace some MII-related magic numbers with constants - - LK1.1.12: - * fix power-up sequence - - LK1.1.13: - * revert version 1.1.12, power-up sequence "fix" - - LK1.1.14 (Kryzsztof Halasa): - * fix spurious bad initializations - * pound phy a la SMSC's app note on the subject - - AC1.1.14ac - * fix power up/down for ethtool that broke in 1.11 - */ #define DRV_NAME "epic100" -#define DRV_VERSION "1.11+LK1.1.14+AC1.1.14" -#define DRV_RELDATE "June 2, 2004" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" /* The user-configurable values. These may be modified when a driver module is loaded.*/ @@ -204,19 +157,15 @@ typedef enum { struct epic_chip_info { const char *name; - int io_size; /* Needed for I/O region check or ioremap(). */ int drv_flags; /* Driver use, intended as capability flags. */ }; /* indexed by chip_t */ static const struct epic_chip_info pci_id_tbl[] = { - { "SMSC EPIC/100 83c170", - EPIC_TOTAL_SIZE, TYPE2_INTR | NO_MII | MII_PWRDWN }, - { "SMSC EPIC/100 83c170", - EPIC_TOTAL_SIZE, TYPE2_INTR }, - { "SMSC EPIC/C 83c175", - EPIC_TOTAL_SIZE, TYPE2_INTR | MII_PWRDWN }, + { "SMSC EPIC/100 83c170", TYPE2_INTR | NO_MII | MII_PWRDWN }, + { "SMSC EPIC/100 83c170", TYPE2_INTR }, + { "SMSC EPIC/C 83c175", TYPE2_INTR | MII_PWRDWN }, }; @@ -385,8 +334,8 @@ static int __devinit epic_init_one (struct pci_dev *pdev, goto out; irq = pdev->irq; - if (pci_resource_len(pdev, 0) < pci_id_tbl[chip_idx].io_size) { - printk (KERN_ERR "card %d: no PCI region space\n", card_idx); + if (pci_resource_len(pdev, 0) < EPIC_TOTAL_SIZE) { + dev_err(&pdev->dev, "no PCI region space\n"); ret = -ENODEV; goto err_out_disable; } @@ -401,7 +350,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, dev = alloc_etherdev(sizeof (*ep)); if (!dev) { - printk (KERN_ERR "card %d: no memory for eth device\n", card_idx); + dev_err(&pdev->dev, "no memory for eth device\n"); goto err_out_free_res; } SET_MODULE_OWNER(dev); @@ -413,7 +362,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, ioaddr = pci_resource_start (pdev, 1); ioaddr = (long) ioremap (ioaddr, pci_resource_len (pdev, 1)); if (!ioaddr) { - printk (KERN_ERR DRV_NAME " %d: ioremap failed\n", card_idx); + dev_err(&pdev->dev, "ioremap failed\n"); goto err_out_free_netdev; } #endif @@ -473,8 +422,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, ((u16 *)dev->dev_addr)[i] = le16_to_cpu(inw(ioaddr + LAN0 + i*4)); if (debug > 2) { - printk(KERN_DEBUG DRV_NAME "(%s): EEPROM contents\n", - pci_name(pdev)); + dev_printk(KERN_DEBUG, &pdev->dev, "EEPROM contents:\n"); for (i = 0; i < 64; i++) printk(" %4.4x%s", read_eeprom(ioaddr, i), i % 16 == 15 ? "\n" : ""); @@ -496,21 +444,23 @@ static int __devinit epic_init_one (struct pci_dev *pdev, int mii_status = mdio_read(dev, phy, MII_BMSR); if (mii_status != 0xffff && mii_status != 0x0000) { ep->phys[phy_idx++] = phy; - printk(KERN_INFO DRV_NAME "(%s): MII transceiver #%d control " - "%4.4x status %4.4x.\n", - pci_name(pdev), phy, mdio_read(dev, phy, 0), mii_status); + dev_info(&pdev->dev, + "MII transceiver #%d control " + "%4.4x status %4.4x.\n", + phy, mdio_read(dev, phy, 0), mii_status); } } ep->mii_phy_cnt = phy_idx; if (phy_idx != 0) { phy = ep->phys[0]; ep->mii.advertising = mdio_read(dev, phy, MII_ADVERTISE); - printk(KERN_INFO DRV_NAME "(%s): Autonegotiation advertising %4.4x link " + dev_info(&pdev->dev, + "Autonegotiation advertising %4.4x link " "partner %4.4x.\n", - pci_name(pdev), ep->mii.advertising, mdio_read(dev, phy, 5)); + ep->mii.advertising, mdio_read(dev, phy, 5)); } else if ( ! (ep->chip_flags & NO_MII)) { - printk(KERN_WARNING DRV_NAME "(%s): ***WARNING***: No MII transceiver found!\n", - pci_name(pdev)); + dev_warn(&pdev->dev, + "***WARNING***: No MII transceiver found!\n"); /* Use the known PHY address of the EPII. */ ep->phys[0] = 3; } @@ -525,8 +475,7 @@ static int __devinit epic_init_one (struct pci_dev *pdev, /* The lower four bits are the media type. */ if (duplex) { ep->mii.force_media = ep->mii.full_duplex = 1; - printk(KERN_INFO DRV_NAME "(%s): Forced full duplex operation requested.\n", - pci_name(pdev)); + dev_info(&pdev->dev, "Forced full duplex requested.\n"); } dev->if_port = ep->default_port = option; diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c index c701951dcd6..97d34fee8c1 100644 --- a/drivers/net/fealnx.c +++ b/drivers/net/fealnx.c @@ -124,7 +124,9 @@ MODULE_PARM_DESC(multicast_filter_limit, "fealnx maximum number of filtered mult MODULE_PARM_DESC(options, "fealnx: Bits 0-3: media type, bit 17: full duplex"); MODULE_PARM_DESC(full_duplex, "fealnx full duplex setting(s) (1)"); -#define MIN_REGION_SIZE 136 +enum { + MIN_REGION_SIZE = 136, +}; /* A chip capabilities table, matching the entries in pci_tbl[] above. */ enum chip_capability_flags { @@ -146,14 +148,13 @@ enum phy_type_flags { struct chip_info { char *chip_name; - int io_size; int flags; }; -static const struct chip_info skel_netdrv_tbl[] = { - {"100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR}, - {"100/10M Ethernet PCI Adapter", 136, HAS_CHIP_XCVR}, - {"1000/100/10M Ethernet PCI Adapter", 136, HAS_MII_XCVR}, +static const struct chip_info skel_netdrv_tbl[] __devinitdata = { + { "100/10M Ethernet PCI Adapter", HAS_MII_XCVR }, + { "100/10M Ethernet PCI Adapter", HAS_CHIP_XCVR }, + { "1000/100/10M Ethernet PCI Adapter", HAS_MII_XCVR }, }; /* Offsets to the Command and Status Registers. */ @@ -504,13 +505,14 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, len = pci_resource_len(pdev, bar); if (len < MIN_REGION_SIZE) { - printk(KERN_ERR "%s: region size %ld too small, aborting\n", - boardname, len); + dev_err(&pdev->dev, + "region size %ld too small, aborting\n", len); return -ENODEV; } i = pci_request_regions(pdev, boardname); - if (i) return i; + if (i) + return i; irq = pdev->irq; @@ -576,9 +578,9 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, if (mii_status != 0xffff && mii_status != 0x0000) { np->phys[phy_idx++] = phy; - printk(KERN_INFO - "%s: MII PHY found at address %d, status " - "0x%4.4x.\n", dev->name, phy, mii_status); + dev_info(&pdev->dev, + "MII PHY found at address %d, status " + "0x%4.4x.\n", phy, mii_status); /* get phy type */ { unsigned int data; @@ -601,10 +603,10 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, } np->mii_cnt = phy_idx; - if (phy_idx == 0) { - printk(KERN_WARNING "%s: MII PHY not found -- this device may " - "not operate correctly.\n", dev->name); - } + if (phy_idx == 0) + dev_warn(&pdev->dev, + "MII PHY not found -- this device may " + "not operate correctly.\n"); } else { np->phys[0] = 32; /* 89/6/23 add, (begin) */ @@ -630,7 +632,7 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev, np->mii.full_duplex = full_duplex[card_idx]; if (np->mii.full_duplex) { - printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name); + dev_info(&pdev->dev, "Media type forced to Full Duplex.\n"); /* 89/6/13 add, (begin) */ // if (np->PHYType==MarvellPHY) if ((np->PHYType == MarvellPHY) || (np->PHYType == LevelOnePHY)) { diff --git a/drivers/net/gt96100eth.c b/drivers/net/gt96100eth.c index 49dacc6e35a..2b4db741447 100644 --- a/drivers/net/gt96100eth.c +++ b/drivers/net/gt96100eth.c @@ -699,7 +699,6 @@ static int __init gt96100_probe1(struct pci_dev *pci, int port_num) memset(gp, 0, sizeof(*gp)); // clear it gp->port_num = port_num; - gp->io_size = GT96100_ETH_IO_SIZE; gp->port_offset = port_num * GT96100_ETH_IO_SIZE; gp->phy_addr = phy_addr; gp->chip_rev = chip_rev; @@ -1531,7 +1530,7 @@ static void gt96100_cleanup_module(void) + sizeof(gt96100_td_t) * TX_RING_SIZE, gp->rx_ring); free_netdev(gtif->dev); - release_region(gtif->iobase, gp->io_size); + release_region(gtif->iobase, GT96100_ETH_IO_SIZE); } } } diff --git a/drivers/net/gt96100eth.h b/drivers/net/gt96100eth.h index 2a8331938b8..3b62a87c7d7 100644 --- a/drivers/net/gt96100eth.h +++ b/drivers/net/gt96100eth.h @@ -331,7 +331,6 @@ struct gt96100_private { mib_counters_t mib; struct net_device_stats stats; - int io_size; int port_num; // 0 or 1 int chip_rev; u32 port_offset; @@ -340,7 +339,6 @@ struct gt96100_private { u32 last_psr; // last value of the port status register int options; /* User-settable misc. driver options. */ - int drv_flags; struct timer_list timer; spinlock_t lock; /* Serialise access to device */ }; diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c index 7bcd939c6ed..409c6aab041 100644 --- a/drivers/net/hamachi.c +++ b/drivers/net/hamachi.c @@ -20,22 +20,15 @@ Support and updates available at http://www.scyld.com/network/hamachi.html + [link no longer provides useful info -jgarzik] or http://www.parl.clemson.edu/~keithu/hamachi.html - - - Linux kernel changelog: - - LK1.0.1: - - fix lack of pci_dev<->dev association - - ethtool support (jgarzik) - */ #define DRV_NAME "hamachi" -#define DRV_VERSION "1.01+LK1.0.1" -#define DRV_RELDATE "5/18/2001" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" /* A few user-configurable values. */ @@ -608,7 +601,8 @@ static int __devinit hamachi_init_one (struct pci_dev *pdev, pci_set_master(pdev); i = pci_request_regions(pdev, DRV_NAME); - if (i) return i; + if (i) + return i; irq = pdev->irq; ioaddr = ioremap(base, 0x400); diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 72aad42db7b..f4c8fd373b9 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -188,7 +188,6 @@ struct myri10ge_priv { int vendor_specific_offset; u32 devctl; u16 msi_flags; - u32 pm_state[16]; u32 read_dma; u32 write_dma; u32 read_write_dma; @@ -1289,6 +1288,7 @@ static const char myri10ge_gstrings_stats[][ETH_GSTRING_LEN] = { "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors", "tx_heartbeat_errors", "tx_window_errors", /* device-specific stats */ + "tx_boundary", "WC", "irq", "MSI", "read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs", "serial_number", "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt", @@ -1327,6 +1327,10 @@ myri10ge_get_ethtool_stats(struct net_device *netdev, for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++) data[i] = ((unsigned long *)&mgp->stats)[i]; + data[i++] = (unsigned int)mgp->tx.boundary; + data[i++] = (unsigned int)(mgp->mtrr >= 0); + data[i++] = (unsigned int)mgp->pdev->irq; + data[i++] = (unsigned int)mgp->msi_enabled; data[i++] = (unsigned int)mgp->read_dma; data[i++] = (unsigned int)mgp->write_dma; data[i++] = (unsigned int)mgp->read_write_dma; @@ -2197,8 +2201,6 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu) * any other device, except if forced with myri10ge_ecrc_enable > 1. */ -#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_PCIE 0x005d - static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp) { struct pci_dev *bridge = mgp->pdev->bus->self; @@ -2737,11 +2739,10 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "register_netdev failed: %d\n", status); goto abort_with_irq; } - - printk(KERN_INFO "myri10ge: %s: %s IRQ %d, tx bndry %d, fw %s, WC %s\n", - netdev->name, (mgp->msi_enabled ? "MSI" : "xPIC"), - pdev->irq, mgp->tx.boundary, mgp->fw_name, - (mgp->mtrr >= 0 ? "Enabled" : "Disabled")); + dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n", + (mgp->msi_enabled ? "MSI" : "xPIC"), + pdev->irq, mgp->tx.boundary, mgp->fw_name, + (mgp->mtrr >= 0 ? "Enabled" : "Disabled")); return 0; diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 9df2628be1e..db0475a1102 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -20,120 +20,9 @@ Support information and updates available at http://www.scyld.com/network/netsemi.html + [link no longer provides useful info -jgarzik] - Linux kernel modifications: - - Version 1.0.1: - - Spinlock fixes - - Bug fixes and better intr performance (Tjeerd) - Version 1.0.2: - - Now reads correct MAC address from eeprom - Version 1.0.3: - - Eliminate redundant priv->tx_full flag - - Call netif_start_queue from dev->tx_timeout - - wmb() in start_tx() to flush data - - Update Tx locking - - Clean up PCI enable (davej) - Version 1.0.4: - - Merge Donald Becker's natsemi.c version 1.07 - Version 1.0.5: - - { fill me in } - Version 1.0.6: - * ethtool support (jgarzik) - * Proper initialization of the card (which sometimes - fails to occur and leaves the card in a non-functional - state). (uzi) - - * Some documented register settings to optimize some - of the 100Mbit autodetection circuitry in rev C cards. (uzi) - - * Polling of the PHY intr for stuff like link state - change and auto- negotiation to finally work properly. (uzi) - - * One-liner removal of a duplicate declaration of - netdev_error(). (uzi) - - Version 1.0.7: (Manfred Spraul) - * pci dma - * SMP locking update - * full reset added into tx_timeout - * correct multicast hash generation (both big and little endian) - [copied from a natsemi driver version - from Myrio Corporation, Greg Smith] - * suspend/resume - - version 1.0.8 (Tim Hockin <thockin@sun.com>) - * ETHTOOL_* support - * Wake on lan support (Erik Gilling) - * MXDMA fixes for serverworks - * EEPROM reload - - version 1.0.9 (Manfred Spraul) - * Main change: fix lack of synchronize - netif_close/netif_suspend against a last interrupt - or packet. - * do not enable superflous interrupts (e.g. the - drivers relies on TxDone - TxIntr not needed) - * wait that the hardware has really stopped in close - and suspend. - * workaround for the (at least) gcc-2.95.1 compiler - problem. Also simplifies the code a bit. - * disable_irq() in tx_timeout - needed to protect - against rx interrupts. - * stop the nic before switching into silent rx mode - for wol (required according to docu). - - version 1.0.10: - * use long for ee_addr (various) - * print pointers properly (DaveM) - * include asm/irq.h (?) - - version 1.0.11: - * check and reset if PHY errors appear (Adrian Sun) - * WoL cleanup (Tim Hockin) - * Magic number cleanup (Tim Hockin) - * Don't reload EEPROM on every reset (Tim Hockin) - * Save and restore EEPROM state across reset (Tim Hockin) - * MDIO Cleanup (Tim Hockin) - * Reformat register offsets/bits (jgarzik) - - version 1.0.12: - * ETHTOOL_* further support (Tim Hockin) - - version 1.0.13: - * ETHTOOL_[G]EEPROM support (Tim Hockin) - - version 1.0.13: - * crc cleanup (Matt Domsch <Matt_Domsch@dell.com>) - - version 1.0.14: - * Cleanup some messages and autoneg in ethtool (Tim Hockin) - - version 1.0.15: - * Get rid of cable_magic flag - * use new (National provided) solution for cable magic issue - - version 1.0.16: - * call netdev_rx() for RxErrors (Manfred Spraul) - * formatting and cleanups - * change options and full_duplex arrays to be zero - initialized - * enable only the WoL and PHY interrupts in wol mode - - version 1.0.17: - * only do cable_magic on 83815 and early 83816 (Tim Hockin) - * create a function for rx refill (Manfred Spraul) - * combine drain_ring and init_ring (Manfred Spraul) - * oom handling (Manfred Spraul) - * hands_off instead of playing with netif_device_{de,a}ttach - (Manfred Spraul) - * be sure to write the MAC back to the chip (Manfred Spraul) - * lengthen EEPROM timeout, and always warn about timeouts - (Manfred Spraul) - * comments update (Manfred) - * do the right thing on a phy-reset (Manfred and Tim) - TODO: * big endian support with CFG:BEM instead of cpu_to_le32 */ @@ -165,8 +54,8 @@ #include <asm/uaccess.h> #define DRV_NAME "natsemi" -#define DRV_VERSION "1.07+LK1.0.17" -#define DRV_RELDATE "Sep 27, 2002" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" #define RX_OFFSET 2 diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index fa50eb88940..34bdba9eec7 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -231,12 +231,12 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, irq = pdev->irq; if (!ioaddr || ((pci_resource_flags (pdev, 0) & IORESOURCE_IO) == 0)) { - printk (KERN_ERR PFX "no I/O resource at PCI BAR #0\n"); + dev_err(&pdev->dev, "no I/O resource at PCI BAR #0\n"); return -ENODEV; } if (request_region (ioaddr, NE_IO_EXTENT, DRV_NAME) == NULL) { - printk (KERN_ERR PFX "I/O resource 0x%x @ 0x%lx busy\n", + dev_err(&pdev->dev, "I/O resource 0x%x @ 0x%lx busy\n", NE_IO_EXTENT, ioaddr); return -EBUSY; } @@ -263,7 +263,7 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, /* Allocate net_device, dev->priv; fill in 8390 specific dev fields. */ dev = alloc_ei_netdev(); if (!dev) { - printk (KERN_ERR PFX "cannot allocate ethernet device\n"); + dev_err(&pdev->dev, "cannot allocate ethernet device\n"); goto err_out_free_res; } SET_MODULE_OWNER(dev); @@ -281,7 +281,8 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, while ((inb(ioaddr + EN0_ISR) & ENISR_RESET) == 0) /* Limit wait: '2' avoids jiffy roll-over. */ if (jiffies - reset_start_time > 2) { - printk(KERN_ERR PFX "Card failure (no reset ack).\n"); + dev_err(&pdev->dev, + "Card failure (no reset ack).\n"); goto err_out_free_netdev; } diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c index a68bf474f6e..d4be207d321 100644 --- a/drivers/net/ni5010.c +++ b/drivers/net/ni5010.c @@ -1,17 +1,12 @@ /* ni5010.c: A network driver for the MiCom-Interlan NI5010 ethercard. * - * Copyright 1996,1997 Jan-Pascal van Best and Andreas Mohr. + * Copyright 1996,1997,2006 Jan-Pascal van Best and Andreas Mohr. * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. * * The authors may be reached as: - * jvbest@wi.leidenuniv.nl a.mohr@mailto.de - * or by snail mail as - * Jan-Pascal van Best Andreas Mohr - * Klikspaanweg 58-4 Stauferstr. 6 - * 2324 LZ Leiden D-71272 Renningen - * The Netherlands Germany + * janpascal@vanbest.org andi@lisas.de * * Sources: * Donald Becker's "skeleton.c" @@ -27,8 +22,9 @@ * 970503 v0.93: Fixed auto-irq failure on warm reboot (JB) * 970623 v1.00: First kernel version (AM) * 970814 v1.01: Added detection of onboard receive buffer size (AM) + * 060611 v1.02: slight cleanup: email addresses, driver modernization. * Bugs: - * - None known... + * - not SMP-safe (no locking of I/O accesses) * - Note that you have to patch ifconfig for the new /proc/net/dev * format. It gives incorrect stats otherwise. * @@ -39,7 +35,7 @@ * Complete merge with Andreas' driver * Implement ring buffers (Is this useful? You can't squeeze * too many packet in a 2k buffer!) - * Implement DMA (Again, is this useful? Some docs says DMA is + * Implement DMA (Again, is this useful? Some docs say DMA is * slower than programmed I/O) * * Compile with: @@ -47,7 +43,7 @@ * -DMODULE -c ni5010.c * * Insert with e.g.: - * insmod ni5010.o io=0x300 irq=5 + * insmod ni5010.ko io=0x300 irq=5 */ #include <linux/module.h> @@ -69,15 +65,15 @@ #include "ni5010.h" -static const char *boardname = "NI5010"; -static char *version = - "ni5010.c: v1.00 06/23/97 Jan-Pascal van Best and Andreas Mohr\n"; +static const char boardname[] = "NI5010"; +static char version[] __initdata = + "ni5010.c: v1.02 20060611 Jan-Pascal van Best and Andreas Mohr\n"; /* bufsize_rcv == 0 means autoprobing */ static unsigned int bufsize_rcv; -#define jumpered_interrupts /* IRQ line jumpered on board */ -#undef jumpered_dma /* No DMA used */ +#define JUMPERED_INTERRUPTS /* IRQ line jumpered on board */ +#undef JUMPERED_DMA /* No DMA used */ #undef FULL_IODETECT /* Only detect in portlist */ #ifndef FULL_IODETECT @@ -281,7 +277,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) PRINTK2((KERN_DEBUG "%s: I/O #4 passed!\n", dev->name)); -#ifdef jumpered_interrupts +#ifdef JUMPERED_INTERRUPTS if (dev->irq == 0xff) ; else if (dev->irq < 2) { @@ -305,7 +301,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) } else if (dev->irq == 2) { dev->irq = 9; } -#endif /* jumpered_irq */ +#endif /* JUMPERED_INTERRUPTS */ PRINTK2((KERN_DEBUG "%s: I/O #9 passed!\n", dev->name)); /* DMA is not supported (yet?), so no use detecting it */ @@ -334,7 +330,7 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) outw(0, IE_GP); /* Point GP at start of packet */ outb(0, IE_RBUF); /* set buffer byte 0 to 0 again */ } - printk("// bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); + printk("-> bufsize rcv/xmt=%d/%d\n", bufsize_rcv, NI5010_BUFSIZE); memset(dev->priv, 0, sizeof(struct ni5010_local)); dev->open = ni5010_open; @@ -354,11 +350,9 @@ static int __init ni5010_probe1(struct net_device *dev, int ioaddr) outb(0xff, EDLC_XCLR); /* Kill all pending xmt interrupts */ printk(KERN_INFO "%s: NI5010 found at 0x%x, using IRQ %d", dev->name, ioaddr, dev->irq); - if (dev->dma) printk(" & DMA %d", dev->dma); + if (dev->dma) + printk(" & DMA %d", dev->dma); printk(".\n"); - - printk(KERN_INFO "Join the NI5010 driver development team!\n"); - printk(KERN_INFO "Mail to a.mohr@mailto.de or jvbest@wi.leidenuniv.nl\n"); return 0; out: release_region(dev->base_addr, NI5010_IO_EXTENT); @@ -371,7 +365,7 @@ out: * * This routine should set everything up anew at each open, even * registers that "should" only need to be set once at boot, so that - * there is non-reboot way to recover if something goes wrong. + * there is a non-reboot way to recover if something goes wrong. */ static int ni5010_open(struct net_device *dev) @@ -390,13 +384,13 @@ static int ni5010_open(struct net_device *dev) * Always allocate the DMA channel after the IRQ, * and clean up on failure. */ -#ifdef jumpered_dma +#ifdef JUMPERED_DMA if (request_dma(dev->dma, cardname)) { printk(KERN_WARNING "%s: Cannot get dma %#2x\n", dev->name, dev->dma); free_irq(dev->irq, NULL); return -EAGAIN; } -#endif /* jumpered_dma */ +#endif /* JUMPERED_DMA */ PRINTK3((KERN_DEBUG "%s: passed open() #2\n", dev->name)); /* Reset the hardware here. Don't forget to set the station address. */ @@ -633,7 +627,7 @@ static int ni5010_close(struct net_device *dev) int ioaddr = dev->base_addr; PRINTK2((KERN_DEBUG "%s: entering ni5010_close\n", dev->name)); -#ifdef jumpered_interrupts +#ifdef JUMPERED_INTERRUPTS free_irq(dev->irq, NULL); #endif /* Put card in held-RESET state */ @@ -771,7 +765,7 @@ module_param(irq, int, 0); MODULE_PARM_DESC(io, "ni5010 I/O base address"); MODULE_PARM_DESC(irq, "ni5010 IRQ number"); -int init_module(void) +static int __init ni5010_init_module(void) { PRINTK2((KERN_DEBUG "%s: entering init_module\n", boardname)); /* @@ -792,13 +786,15 @@ int init_module(void) return 0; } -void cleanup_module(void) +static void __exit ni5010_cleanup_module(void) { PRINTK2((KERN_DEBUG "%s: entering cleanup_module\n", boardname)); unregister_netdev(dev_ni5010); release_region(dev_ni5010->base_addr, NI5010_IO_EXTENT); free_netdev(dev_ni5010); } +module_init(ni5010_init_module); +module_exit(ni5010_cleanup_module); #endif /* MODULE */ MODULE_LICENSE("GPL"); diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 70429108c40..0e76859c90a 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -803,7 +803,7 @@ static int ns83820_setup_rx(struct net_device *ndev) writel(dev->IMR_cache, dev->base + IMR); writel(1, dev->base + IER); - spin_unlock_irq(&dev->misc_lock); + spin_unlock(&dev->misc_lock); kick_rx(ndev); @@ -1012,8 +1012,6 @@ static void do_tx_done(struct net_device *ndev) struct ns83820 *dev = PRIV(ndev); u32 cmdsts, tx_done_idx, *desc; - spin_lock_irq(&dev->tx_lock); - dprintk("do_tx_done(%p)\n", ndev); tx_done_idx = dev->tx_done_idx; desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); @@ -1069,7 +1067,6 @@ static void do_tx_done(struct net_device *ndev) netif_start_queue(ndev); netif_wake_queue(ndev); } - spin_unlock_irq(&dev->tx_lock); } static void ns83820_cleanup_tx(struct ns83820 *dev) @@ -1281,11 +1278,13 @@ static struct ethtool_ops ops = { .get_link = ns83820_get_link }; +/* this function is called in irq context from the ISR */ static void ns83820_mib_isr(struct ns83820 *dev) { - spin_lock(&dev->misc_lock); + unsigned long flags; + spin_lock_irqsave(&dev->misc_lock, flags); ns83820_update_stats(dev); - spin_unlock(&dev->misc_lock); + spin_unlock_irqrestore(&dev->misc_lock, flags); } static void ns83820_do_isr(struct net_device *ndev, u32 isr); @@ -1307,6 +1306,8 @@ static irqreturn_t ns83820_irq(int foo, void *data, struct pt_regs *regs) static void ns83820_do_isr(struct net_device *ndev, u32 isr) { struct ns83820 *dev = PRIV(ndev); + unsigned long flags; + #ifdef DEBUG if (isr & ~(ISR_PHY | ISR_RXDESC | ISR_RXEARLY | ISR_RXOK | ISR_RXERR | ISR_TXIDLE | ISR_TXOK | ISR_TXDESC)) Dprintk("odd isr? 0x%08x\n", isr); @@ -1321,10 +1322,10 @@ static void ns83820_do_isr(struct net_device *ndev, u32 isr) if ((ISR_RXDESC | ISR_RXOK) & isr) { prefetch(dev->rx_info.next_rx_desc); - spin_lock_irq(&dev->misc_lock); + spin_lock_irqsave(&dev->misc_lock, flags); dev->IMR_cache &= ~(ISR_RXDESC | ISR_RXOK); writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irq(&dev->misc_lock); + spin_unlock_irqrestore(&dev->misc_lock, flags); tasklet_schedule(&dev->rx_tasklet); //rx_irq(ndev); @@ -1370,16 +1371,18 @@ static void ns83820_do_isr(struct net_device *ndev, u32 isr) * work has accumulated */ if ((ISR_TXDESC | ISR_TXIDLE | ISR_TXOK | ISR_TXERR) & isr) { + spin_lock_irqsave(&dev->tx_lock, flags); do_tx_done(ndev); + spin_unlock_irqrestore(&dev->tx_lock, flags); /* Disable TxOk if there are no outstanding tx packets. */ if ((dev->tx_done_idx == dev->tx_free_idx) && (dev->IMR_cache & ISR_TXOK)) { - spin_lock_irq(&dev->misc_lock); + spin_lock_irqsave(&dev->misc_lock, flags); dev->IMR_cache &= ~ISR_TXOK; writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irq(&dev->misc_lock); + spin_unlock_irqrestore(&dev->misc_lock, flags); } } @@ -1390,10 +1393,10 @@ static void ns83820_do_isr(struct net_device *ndev, u32 isr) * nature are expected, we must enable TxOk. */ if ((ISR_TXIDLE & isr) && (dev->tx_done_idx != dev->tx_free_idx)) { - spin_lock_irq(&dev->misc_lock); + spin_lock_irqsave(&dev->misc_lock, flags); dev->IMR_cache |= ISR_TXOK; writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irq(&dev->misc_lock); + spin_unlock_irqrestore(&dev->misc_lock, flags); } /* MIB interrupt: one of the statistics counters is about to overflow */ @@ -1455,7 +1458,7 @@ static void ns83820_tx_timeout(struct net_device *ndev) u32 tx_done_idx, *desc; unsigned long flags; - local_irq_save(flags); + spin_lock_irqsave(&dev->tx_lock, flags); tx_done_idx = dev->tx_done_idx; desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); @@ -1482,7 +1485,7 @@ static void ns83820_tx_timeout(struct net_device *ndev) ndev->name, tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); - local_irq_restore(flags); + spin_unlock_irqrestore(&dev->tx_lock, flags); } static void ns83820_tx_watch(unsigned long data) @@ -1832,7 +1835,7 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ } else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { using_dac = 0; } else { - printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n"); + dev_warn(&pci_dev->dev, "pci_set_dma_mask failed!\n"); return -ENODEV; } @@ -1855,7 +1858,7 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ err = pci_enable_device(pci_dev); if (err) { - printk(KERN_INFO "ns83820: pci_enable_dev failed: %d\n", err); + dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err); goto out_free; } @@ -1884,8 +1887,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED, DRV_NAME, ndev); if (err) { - printk(KERN_INFO "ns83820: unable to register irq %d\n", - pci_dev->irq); + dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n", + pci_dev->irq, err); goto out_disable; } @@ -1899,7 +1902,7 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ rtnl_lock(); err = dev_alloc_name(ndev, ndev->name); if (err < 0) { - printk(KERN_INFO "ns83820: unable to get netdev name: %d\n", err); + dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err); goto out_free_irq; } diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 3388ee1313e..e0e29396404 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -601,7 +601,7 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* dev zeroed in alloc_etherdev */ dev = alloc_etherdev (sizeof (*tp)); if (dev == NULL) { - printk (KERN_ERR PFX "unable to alloc new ethernet\n"); + dev_err(&pdev->dev, "unable to alloc new ethernet\n"); DPRINTK ("EXIT, returning -ENOMEM\n"); return -ENOMEM; } @@ -631,14 +631,14 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* make sure PCI base addr 0 is PIO */ if (!(pio_flags & IORESOURCE_IO)) { - printk (KERN_ERR PFX "region #0 not a PIO resource, aborting\n"); + dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n"); rc = -ENODEV; goto err_out; } /* make sure PCI base addr 1 is MMIO */ if (!(mmio_flags & IORESOURCE_MEM)) { - printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n"); + dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n"); rc = -ENODEV; goto err_out; } @@ -646,12 +646,12 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* check for weird/broken PCI region reporting */ if ((pio_len < NETDRV_MIN_IO_SIZE) || (mmio_len < NETDRV_MIN_IO_SIZE)) { - printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); + dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n"); rc = -ENODEV; goto err_out; } - rc = pci_request_regions (pdev, "pci-skeleton"); + rc = pci_request_regions (pdev, MODNAME); if (rc) goto err_out; @@ -663,7 +663,7 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, /* ioremap MMIO region */ ioaddr = ioremap (mmio_start, mmio_len); if (ioaddr == NULL) { - printk (KERN_ERR PFX "cannot remap MMIO, aborting\n"); + dev_err(&pdev->dev, "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } @@ -699,9 +699,10 @@ static int __devinit netdrv_init_board (struct pci_dev *pdev, } /* if unknown chip, assume array element #0, original RTL-8139 in this case */ - printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8139\n", - pci_name(pdev)); - printk (KERN_DEBUG PFX "PCI device %s: TxConfig = 0x%lx\n", pci_name(pdev), NETDRV_R32 (TxConfig)); + dev_printk (KERN_DEBUG, &pdev->dev, + "unknown chip version, assuming RTL-8139\n"); + dev_printk (KERN_DEBUG, &pdev->dev, "TxConfig = 0x%lx\n", + NETDRV_R32 (TxConfig)); tp->chipset = 0; match: diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index d768f3d1ac2..4daafe30335 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -58,18 +58,15 @@ static const char *const version = * PCI device identifiers for "new style" Linux PCI Device Drivers */ static struct pci_device_id pcnet32_pci_tbl[] = { - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE_HOME), }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE), }, /* * Adapters that were sold with IBM's RS/6000 or pSeries hardware have * the incorrect vendor id. */ - { PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_NETWORK_ETHERNET << 8, 0xffff00, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_AMD_LANCE), + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), .class_mask = 0xffff00, }, { } /* terminate list */ }; @@ -188,6 +185,23 @@ static int homepna[MAX_UNITS]; #define PCNET32_TOTAL_SIZE 0x20 +#define CSR0 0 +#define CSR0_INIT 0x1 +#define CSR0_START 0x2 +#define CSR0_STOP 0x4 +#define CSR0_TXPOLL 0x8 +#define CSR0_INTEN 0x40 +#define CSR0_IDON 0x0100 +#define CSR0_NORMAL (CSR0_START | CSR0_INTEN) +#define PCNET32_INIT_LOW 1 +#define PCNET32_INIT_HIGH 2 +#define CSR3 3 +#define CSR4 4 +#define CSR5 5 +#define CSR5_SUSPEND 0x0001 +#define CSR15 15 +#define PCNET32_MC_FILTER 8 + /* The PCNET32 Rx and Tx ring descriptors. */ struct pcnet32_rx_head { u32 base; @@ -277,7 +291,6 @@ struct pcnet32_private { u32 phymask; }; -static void pcnet32_probe_vlbus(void); static int pcnet32_probe_pci(struct pci_dev *, const struct pci_device_id *); static int pcnet32_probe1(unsigned long, int, struct pci_dev *); static int pcnet32_open(struct net_device *); @@ -419,6 +432,238 @@ static struct pcnet32_access pcnet32_dwio = { .reset = pcnet32_dwio_reset }; +static void pcnet32_netif_stop(struct net_device *dev) +{ + dev->trans_start = jiffies; + netif_poll_disable(dev); + netif_tx_disable(dev); +} + +static void pcnet32_netif_start(struct net_device *dev) +{ + netif_wake_queue(dev); + netif_poll_enable(dev); +} + +/* + * Allocate space for the new sized tx ring. + * Free old resources + * Save new resources. + * Any failure keeps old resources. + * Must be called with lp->lock held. + */ +static void pcnet32_realloc_tx_ring(struct net_device *dev, + struct pcnet32_private *lp, + unsigned int size) +{ + dma_addr_t new_ring_dma_addr; + dma_addr_t *new_dma_addr_list; + struct pcnet32_tx_head *new_tx_ring; + struct sk_buff **new_skb_list; + + pcnet32_purge_tx_ring(dev); + + new_tx_ring = pci_alloc_consistent(lp->pci_dev, + sizeof(struct pcnet32_tx_head) * + (1 << size), + &new_ring_dma_addr); + if (new_tx_ring == NULL) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Consistent memory allocation failed.\n", + dev->name); + return; + } + memset(new_tx_ring, 0, sizeof(struct pcnet32_tx_head) * (1 << size)); + + new_dma_addr_list = kcalloc((1 << size), sizeof(dma_addr_t), + GFP_ATOMIC); + if (!new_dma_addr_list) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Memory allocation failed.\n", dev->name); + goto free_new_tx_ring; + } + + new_skb_list = kcalloc((1 << size), sizeof(struct sk_buff *), + GFP_ATOMIC); + if (!new_skb_list) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Memory allocation failed.\n", dev->name); + goto free_new_lists; + } + + kfree(lp->tx_skbuff); + kfree(lp->tx_dma_addr); + pci_free_consistent(lp->pci_dev, + sizeof(struct pcnet32_tx_head) * + lp->tx_ring_size, lp->tx_ring, + lp->tx_ring_dma_addr); + + lp->tx_ring_size = (1 << size); + lp->tx_mod_mask = lp->tx_ring_size - 1; + lp->tx_len_bits = (size << 12); + lp->tx_ring = new_tx_ring; + lp->tx_ring_dma_addr = new_ring_dma_addr; + lp->tx_dma_addr = new_dma_addr_list; + lp->tx_skbuff = new_skb_list; + return; + + free_new_lists: + kfree(new_dma_addr_list); + free_new_tx_ring: + pci_free_consistent(lp->pci_dev, + sizeof(struct pcnet32_tx_head) * + (1 << size), + new_tx_ring, + new_ring_dma_addr); + return; +} + +/* + * Allocate space for the new sized rx ring. + * Re-use old receive buffers. + * alloc extra buffers + * free unneeded buffers + * free unneeded buffers + * Save new resources. + * Any failure keeps old resources. + * Must be called with lp->lock held. + */ +static void pcnet32_realloc_rx_ring(struct net_device *dev, + struct pcnet32_private *lp, + unsigned int size) +{ + dma_addr_t new_ring_dma_addr; + dma_addr_t *new_dma_addr_list; + struct pcnet32_rx_head *new_rx_ring; + struct sk_buff **new_skb_list; + int new, overlap; + + new_rx_ring = pci_alloc_consistent(lp->pci_dev, + sizeof(struct pcnet32_rx_head) * + (1 << size), + &new_ring_dma_addr); + if (new_rx_ring == NULL) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Consistent memory allocation failed.\n", + dev->name); + return; + } + memset(new_rx_ring, 0, sizeof(struct pcnet32_rx_head) * (1 << size)); + + new_dma_addr_list = kcalloc((1 << size), sizeof(dma_addr_t), + GFP_ATOMIC); + if (!new_dma_addr_list) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Memory allocation failed.\n", dev->name); + goto free_new_rx_ring; + } + + new_skb_list = kcalloc((1 << size), sizeof(struct sk_buff *), + GFP_ATOMIC); + if (!new_skb_list) { + if (netif_msg_drv(lp)) + printk("\n" KERN_ERR + "%s: Memory allocation failed.\n", dev->name); + goto free_new_lists; + } + + /* first copy the current receive buffers */ + overlap = min(size, lp->rx_ring_size); + for (new = 0; new < overlap; new++) { + new_rx_ring[new] = lp->rx_ring[new]; + new_dma_addr_list[new] = lp->rx_dma_addr[new]; + new_skb_list[new] = lp->rx_skbuff[new]; + } + /* now allocate any new buffers needed */ + for (; new < size; new++ ) { + struct sk_buff *rx_skbuff; + new_skb_list[new] = dev_alloc_skb(PKT_BUF_SZ); + if (!(rx_skbuff = new_skb_list[new])) { + /* keep the original lists and buffers */ + if (netif_msg_drv(lp)) + printk(KERN_ERR + "%s: pcnet32_realloc_rx_ring dev_alloc_skb failed.\n", + dev->name); + goto free_all_new; + } + skb_reserve(rx_skbuff, 2); + + new_dma_addr_list[new] = + pci_map_single(lp->pci_dev, rx_skbuff->data, + PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); + new_rx_ring[new].base = (u32) le32_to_cpu(new_dma_addr_list[new]); + new_rx_ring[new].buf_length = le16_to_cpu(2 - PKT_BUF_SZ); + new_rx_ring[new].status = le16_to_cpu(0x8000); + } + /* and free any unneeded buffers */ + for (; new < lp->rx_ring_size; new++) { + if (lp->rx_skbuff[new]) { + pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[new], + PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); + dev_kfree_skb(lp->rx_skbuff[new]); + } + } + + kfree(lp->rx_skbuff); + kfree(lp->rx_dma_addr); + pci_free_consistent(lp->pci_dev, + sizeof(struct pcnet32_rx_head) * + lp->rx_ring_size, lp->rx_ring, + lp->rx_ring_dma_addr); + + lp->rx_ring_size = (1 << size); + lp->rx_mod_mask = lp->rx_ring_size - 1; + lp->rx_len_bits = (size << 4); + lp->rx_ring = new_rx_ring; + lp->rx_ring_dma_addr = new_ring_dma_addr; + lp->rx_dma_addr = new_dma_addr_list; + lp->rx_skbuff = new_skb_list; + return; + + free_all_new: + for (; --new >= lp->rx_ring_size; ) { + if (new_skb_list[new]) { + pci_unmap_single(lp->pci_dev, new_dma_addr_list[new], + PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); + dev_kfree_skb(new_skb_list[new]); + } + } + kfree(new_skb_list); + free_new_lists: + kfree(new_dma_addr_list); + free_new_rx_ring: + pci_free_consistent(lp->pci_dev, + sizeof(struct pcnet32_rx_head) * + (1 << size), + new_rx_ring, + new_ring_dma_addr); + return; +} + +static void pcnet32_purge_rx_ring(struct net_device *dev) +{ + struct pcnet32_private *lp = dev->priv; + int i; + + /* free all allocated skbuffs */ + for (i = 0; i < lp->rx_ring_size; i++) { + lp->rx_ring[i].status = 0; /* CPU owns buffer */ + wmb(); /* Make sure adapter sees owner change */ + if (lp->rx_skbuff[i]) { + pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], + PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(lp->rx_skbuff[i]); + } + lp->rx_skbuff[i] = NULL; + lp->rx_dma_addr[i] = 0; + } +} + #ifdef CONFIG_NET_POLL_CONTROLLER static void pcnet32_poll_controller(struct net_device *dev) { @@ -519,10 +764,10 @@ static void pcnet32_get_ringparam(struct net_device *dev, { struct pcnet32_private *lp = dev->priv; - ering->tx_max_pending = TX_MAX_RING_SIZE - 1; - ering->tx_pending = lp->tx_ring_size - 1; - ering->rx_max_pending = RX_MAX_RING_SIZE - 1; - ering->rx_pending = lp->rx_ring_size - 1; + ering->tx_max_pending = TX_MAX_RING_SIZE; + ering->tx_pending = lp->tx_ring_size; + ering->rx_max_pending = RX_MAX_RING_SIZE; + ering->rx_pending = lp->rx_ring_size; } static int pcnet32_set_ringparam(struct net_device *dev, @@ -530,56 +775,53 @@ static int pcnet32_set_ringparam(struct net_device *dev, { struct pcnet32_private *lp = dev->priv; unsigned long flags; + unsigned int size; + ulong ioaddr = dev->base_addr; int i; if (ering->rx_mini_pending || ering->rx_jumbo_pending) return -EINVAL; if (netif_running(dev)) - pcnet32_close(dev); + pcnet32_netif_stop(dev); spin_lock_irqsave(&lp->lock, flags); - pcnet32_free_ring(dev); - lp->tx_ring_size = - min(ering->tx_pending, (unsigned int)TX_MAX_RING_SIZE); - lp->rx_ring_size = - min(ering->rx_pending, (unsigned int)RX_MAX_RING_SIZE); + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); /* stop the chip */ + + size = min(ering->tx_pending, (unsigned int)TX_MAX_RING_SIZE); /* set the minimum ring size to 4, to allow the loopback test to work * unchanged. */ for (i = 2; i <= PCNET32_LOG_MAX_TX_BUFFERS; i++) { - if (lp->tx_ring_size <= (1 << i)) + if (size <= (1 << i)) break; } - lp->tx_ring_size = (1 << i); - lp->tx_mod_mask = lp->tx_ring_size - 1; - lp->tx_len_bits = (i << 12); - + if ((1 << i) != lp->tx_ring_size) + pcnet32_realloc_tx_ring(dev, lp, i); + + size = min(ering->rx_pending, (unsigned int)RX_MAX_RING_SIZE); for (i = 2; i <= PCNET32_LOG_MAX_RX_BUFFERS; i++) { - if (lp->rx_ring_size <= (1 << i)) + if (size <= (1 << i)) break; } - lp->rx_ring_size = (1 << i); - lp->rx_mod_mask = lp->rx_ring_size - 1; - lp->rx_len_bits = (i << 4); + if ((1 << i) != lp->rx_ring_size) + pcnet32_realloc_rx_ring(dev, lp, i); + + dev->weight = lp->rx_ring_size / 2; - if (pcnet32_alloc_ring(dev, dev->name)) { - pcnet32_free_ring(dev); - spin_unlock_irqrestore(&lp->lock, flags); - return -ENOMEM; + if (netif_running(dev)) { + pcnet32_netif_start(dev); + pcnet32_restart(dev, CSR0_NORMAL); } spin_unlock_irqrestore(&lp->lock, flags); - if (pcnet32_debug & NETIF_MSG_DRV) - printk(KERN_INFO PFX + if (netif_msg_drv(lp)) + printk(KERN_INFO "%s: Ring Param Settings: RX: %d, TX: %d\n", dev->name, lp->rx_ring_size, lp->tx_ring_size); - if (netif_running(dev)) - pcnet32_open(dev); - return 0; } @@ -633,29 +875,27 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) unsigned long flags; unsigned long ticks; - *data1 = 1; /* status of test, default to fail */ rc = 1; /* default to fail */ if (netif_running(dev)) pcnet32_close(dev); spin_lock_irqsave(&lp->lock, flags); + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); /* stop the chip */ + + numbuffs = min(numbuffs, (int)min(lp->rx_ring_size, lp->tx_ring_size)); /* Reset the PCNET32 */ lp->a.reset(ioaddr); + lp->a.write_csr(ioaddr, CSR4, 0x0915); /* switch pcnet32 to 32bit mode */ lp->a.write_bcr(ioaddr, 20, 2); - lp->init_block.mode = - le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); - lp->init_block.filter[0] = 0; - lp->init_block.filter[1] = 0; - /* purge & init rings but don't actually restart */ pcnet32_restart(dev, 0x0000); - lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */ + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); /* Set STOP bit */ /* Initialize Transmit buffers. */ size = data_len + 15; @@ -697,14 +937,15 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) } } - x = a->read_bcr(ioaddr, 32); /* set internal loopback in BSR32 */ - x = x | 0x0002; - a->write_bcr(ioaddr, 32, x); + x = a->read_bcr(ioaddr, 32); /* set internal loopback in BCR32 */ + a->write_bcr(ioaddr, 32, x | 0x0002); - lp->a.write_csr(ioaddr, 15, 0x0044); /* set int loopback in CSR15 */ + /* set int loopback in CSR15 */ + x = a->read_csr(ioaddr, CSR15) & 0xfffc; + lp->a.write_csr(ioaddr, CSR15, x | 0x0044); teststatus = le16_to_cpu(0x8000); - lp->a.write_csr(ioaddr, 0, 0x0002); /* Set STRT bit */ + lp->a.write_csr(ioaddr, CSR0, CSR0_START); /* Set STRT bit */ /* Check status of descriptors */ for (x = 0; x < numbuffs; x++) { @@ -712,7 +953,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) rmb(); while ((lp->rx_ring[x].status & teststatus) && (ticks < 200)) { spin_unlock_irqrestore(&lp->lock, flags); - mdelay(1); + msleep(1); spin_lock_irqsave(&lp->lock, flags); rmb(); ticks++; @@ -725,7 +966,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) } } - lp->a.write_csr(ioaddr, 0, 0x0004); /* Set STOP bit */ + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); /* Set STOP bit */ wmb(); if (netif_msg_hw(lp) && netif_msg_pktdata(lp)) { printk(KERN_DEBUG "%s: RX loopback packets:\n", dev->name); @@ -758,25 +999,24 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t * data1) } x++; } - if (!rc) { - *data1 = 0; - } clean_up: + *data1 = rc; pcnet32_purge_tx_ring(dev); - x = a->read_csr(ioaddr, 15) & 0xFFFF; - a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */ - x = a->read_bcr(ioaddr, 32); /* reset internal loopback */ - x = x & ~0x0002; - a->write_bcr(ioaddr, 32, x); + x = a->read_csr(ioaddr, CSR15); + a->write_csr(ioaddr, CSR15, (x & ~0x0044)); /* reset bits 6 and 2 */ - spin_unlock_irqrestore(&lp->lock, flags); + x = a->read_bcr(ioaddr, 32); /* reset internal loopback */ + a->write_bcr(ioaddr, 32, (x & ~0x0002)); if (netif_running(dev)) { + spin_unlock_irqrestore(&lp->lock, flags); pcnet32_open(dev); } else { + pcnet32_purge_rx_ring(dev); lp->a.write_bcr(ioaddr, 20, 4); /* return to 16bit mode */ + spin_unlock_irqrestore(&lp->lock, flags); } return (rc); @@ -839,6 +1079,43 @@ static int pcnet32_phys_id(struct net_device *dev, u32 data) return 0; } +/* + * lp->lock must be held. + */ +static int pcnet32_suspend(struct net_device *dev, unsigned long *flags, + int can_sleep) +{ + int csr5; + struct pcnet32_private *lp = dev->priv; + struct pcnet32_access *a = &lp->a; + ulong ioaddr = dev->base_addr; + int ticks; + + /* set SUSPEND (SPND) - CSR5 bit 0 */ + csr5 = a->read_csr(ioaddr, CSR5); + a->write_csr(ioaddr, CSR5, csr5 | CSR5_SUSPEND); + + /* poll waiting for bit to be set */ + ticks = 0; + while (!(a->read_csr(ioaddr, CSR5) & CSR5_SUSPEND)) { + spin_unlock_irqrestore(&lp->lock, *flags); + if (can_sleep) + msleep(1); + else + mdelay(1); + spin_lock_irqsave(&lp->lock, *flags); + ticks++; + if (ticks > 200) { + if (netif_msg_hw(lp)) + printk(KERN_DEBUG + "%s: Error getting into suspend!\n", + dev->name); + return 0; + } + } + return 1; +} + #define PCNET32_REGS_PER_PHY 32 #define PCNET32_MAX_PHYS 32 static int pcnet32_get_regs_len(struct net_device *dev) @@ -857,32 +1134,13 @@ static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, struct pcnet32_private *lp = dev->priv; struct pcnet32_access *a = &lp->a; ulong ioaddr = dev->base_addr; - int ticks; unsigned long flags; spin_lock_irqsave(&lp->lock, flags); - csr0 = a->read_csr(ioaddr, 0); - if (!(csr0 & 0x0004)) { /* If not stopped */ - /* set SUSPEND (SPND) - CSR5 bit 0 */ - a->write_csr(ioaddr, 5, 0x0001); - - /* poll waiting for bit to be set */ - ticks = 0; - while (!(a->read_csr(ioaddr, 5) & 0x0001)) { - spin_unlock_irqrestore(&lp->lock, flags); - mdelay(1); - spin_lock_irqsave(&lp->lock, flags); - ticks++; - if (ticks > 200) { - if (netif_msg_hw(lp)) - printk(KERN_DEBUG - "%s: Error getting into suspend!\n", - dev->name); - break; - } - } - } + csr0 = a->read_csr(ioaddr, CSR0); + if (!(csr0 & CSR0_STOP)) /* If not stopped */ + pcnet32_suspend(dev, &flags, 1); /* read address PROM */ for (i = 0; i < 16; i += 2) @@ -919,9 +1177,12 @@ static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, } } - if (!(csr0 & 0x0004)) { /* If not stopped */ + if (!(csr0 & CSR0_STOP)) { /* If not stopped */ + int csr5; + /* clear SUSPEND (SPND) - CSR5 bit 0 */ - a->write_csr(ioaddr, 5, 0x0000); + csr5 = a->read_csr(ioaddr, CSR5); + a->write_csr(ioaddr, CSR5, csr5 & (~CSR5_SUSPEND)); } spin_unlock_irqrestore(&lp->lock, flags); @@ -952,7 +1213,7 @@ static struct ethtool_ops pcnet32_ethtool_ops = { /* only probes for non-PCI devices, the rest are handled by * pci_register_driver via pcnet32_probe_pci */ -static void __devinit pcnet32_probe_vlbus(void) +static void __devinit pcnet32_probe_vlbus(unsigned int *pcnet32_portlist) { unsigned int *port, ioaddr; @@ -1436,7 +1697,7 @@ static int pcnet32_alloc_ring(struct net_device *dev, char *name) lp->tx_ring_size, &lp->tx_ring_dma_addr); if (lp->tx_ring == NULL) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); @@ -1448,52 +1709,48 @@ static int pcnet32_alloc_ring(struct net_device *dev, char *name) lp->rx_ring_size, &lp->rx_ring_dma_addr); if (lp->rx_ring == NULL) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Consistent memory allocation failed.\n", name); return -ENOMEM; } - lp->tx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->tx_ring_size, + lp->tx_dma_addr = kcalloc(lp->tx_ring_size, sizeof(dma_addr_t), GFP_ATOMIC); if (!lp->tx_dma_addr) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } - memset(lp->tx_dma_addr, 0, sizeof(dma_addr_t) * lp->tx_ring_size); - lp->rx_dma_addr = kmalloc(sizeof(dma_addr_t) * lp->rx_ring_size, + lp->rx_dma_addr = kcalloc(lp->rx_ring_size, sizeof(dma_addr_t), GFP_ATOMIC); if (!lp->rx_dma_addr) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } - memset(lp->rx_dma_addr, 0, sizeof(dma_addr_t) * lp->rx_ring_size); - lp->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->tx_ring_size, + lp->tx_skbuff = kcalloc(lp->tx_ring_size, sizeof(struct sk_buff *), GFP_ATOMIC); if (!lp->tx_skbuff) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } - memset(lp->tx_skbuff, 0, sizeof(struct sk_buff *) * lp->tx_ring_size); - lp->rx_skbuff = kmalloc(sizeof(struct sk_buff *) * lp->rx_ring_size, + lp->rx_skbuff = kcalloc(lp->rx_ring_size, sizeof(struct sk_buff *), GFP_ATOMIC); if (!lp->rx_skbuff) { - if (pcnet32_debug & NETIF_MSG_DRV) + if (netif_msg_drv(lp)) printk("\n" KERN_ERR PFX "%s: Memory allocation failed.\n", name); return -ENOMEM; } - memset(lp->rx_skbuff, 0, sizeof(struct sk_buff *) * lp->rx_ring_size); return 0; } @@ -1757,16 +2014,7 @@ static int pcnet32_open(struct net_device *dev) err_free_ring: /* free any allocated skbuffs */ - for (i = 0; i < lp->rx_ring_size; i++) { - lp->rx_ring[i].status = 0; - if (lp->rx_skbuff[i]) { - pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], - PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); - dev_kfree_skb(lp->rx_skbuff[i]); - } - lp->rx_skbuff[i] = NULL; - lp->rx_dma_addr[i] = 0; - } + pcnet32_purge_rx_ring(dev); /* * Switch back to 16bit mode to avoid problems with dumb @@ -2348,7 +2596,6 @@ static int pcnet32_close(struct net_device *dev) { unsigned long ioaddr = dev->base_addr; struct pcnet32_private *lp = dev->priv; - int i; unsigned long flags; del_timer_sync(&lp->watchdog_timer); @@ -2379,31 +2626,8 @@ static int pcnet32_close(struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); - /* free all allocated skbuffs */ - for (i = 0; i < lp->rx_ring_size; i++) { - lp->rx_ring[i].status = 0; - wmb(); /* Make sure adapter sees owner change */ - if (lp->rx_skbuff[i]) { - pci_unmap_single(lp->pci_dev, lp->rx_dma_addr[i], - PKT_BUF_SZ - 2, PCI_DMA_FROMDEVICE); - dev_kfree_skb(lp->rx_skbuff[i]); - } - lp->rx_skbuff[i] = NULL; - lp->rx_dma_addr[i] = 0; - } - - for (i = 0; i < lp->tx_ring_size; i++) { - lp->tx_ring[i].status = 0; /* CPU owns buffer */ - wmb(); /* Make sure adapter sees owner change */ - if (lp->tx_skbuff[i]) { - pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[i], - lp->tx_skbuff[i]->len, - PCI_DMA_TODEVICE); - dev_kfree_skb(lp->tx_skbuff[i]); - } - lp->tx_skbuff[i] = NULL; - lp->tx_dma_addr[i] = 0; - } + pcnet32_purge_rx_ring(dev); + pcnet32_purge_tx_ring(dev); spin_unlock_irqrestore(&lp->lock, flags); @@ -2433,6 +2657,7 @@ static void pcnet32_load_multicast(struct net_device *dev) volatile struct pcnet32_init_block *ib = &lp->init_block; volatile u16 *mcast_table = (u16 *) & ib->filter; struct dev_mc_list *dmi = dev->mc_list; + unsigned long ioaddr = dev->base_addr; char *addrs; int i; u32 crc; @@ -2441,6 +2666,10 @@ static void pcnet32_load_multicast(struct net_device *dev) if (dev->flags & IFF_ALLMULTI) { ib->filter[0] = 0xffffffff; ib->filter[1] = 0xffffffff; + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER, 0xffff); + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER+1, 0xffff); + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER+2, 0xffff); + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER+3, 0xffff); return; } /* clear the multicast filter */ @@ -2462,6 +2691,9 @@ static void pcnet32_load_multicast(struct net_device *dev) le16_to_cpu(le16_to_cpu(mcast_table[crc >> 4]) | (1 << (crc & 0xf))); } + for (i = 0; i < 4; i++) + lp->a.write_csr(ioaddr, PCNET32_MC_FILTER + i, + le16_to_cpu(mcast_table[i])); return; } @@ -2472,8 +2704,11 @@ static void pcnet32_set_multicast_list(struct net_device *dev) { unsigned long ioaddr = dev->base_addr, flags; struct pcnet32_private *lp = dev->priv; + int csr15, suspended; spin_lock_irqsave(&lp->lock, flags); + suspended = pcnet32_suspend(dev, &flags, 0); + csr15 = lp->a.read_csr(ioaddr, CSR15); if (dev->flags & IFF_PROMISC) { /* Log any net taps. */ if (netif_msg_hw(lp)) @@ -2482,15 +2717,24 @@ static void pcnet32_set_multicast_list(struct net_device *dev) lp->init_block.mode = le16_to_cpu(0x8000 | (lp->options & PCNET32_PORT_PORTSEL) << 7); + lp->a.write_csr(ioaddr, CSR15, csr15 | 0x8000); } else { lp->init_block.mode = le16_to_cpu((lp->options & PCNET32_PORT_PORTSEL) << 7); + lp->a.write_csr(ioaddr, CSR15, csr15 & 0x7fff); pcnet32_load_multicast(dev); } - lp->a.write_csr(ioaddr, 0, 0x0004); /* Temporarily stop the lance. */ - pcnet32_restart(dev, 0x0042); /* Resume normal operation */ - netif_wake_queue(dev); + if (suspended) { + int csr5; + /* clear SUSPEND (SPND) - CSR5 bit 0 */ + csr5 = lp->a.read_csr(ioaddr, CSR5); + lp->a.write_csr(ioaddr, CSR5, csr5 & (~CSR5_SUSPEND)); + } else { + lp->a.write_csr(ioaddr, CSR0, CSR0_STOP); + pcnet32_restart(dev, CSR0_NORMAL); + netif_wake_queue(dev); + } spin_unlock_irqrestore(&lp->lock, flags); } @@ -2730,7 +2974,7 @@ static int __init pcnet32_init_module(void) /* should we find any remaining VLbus devices ? */ if (pcnet32vlb) - pcnet32_probe_vlbus(); + pcnet32_probe_vlbus(pcnet32_portlist); if (cards_found && (pcnet32_debug & NETIF_MSG_PROBE)) printk(KERN_INFO PFX "%d cards_found.\n", cards_found); diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c index 3efb715c28d..ae60e6e4107 100644 --- a/drivers/net/phy/cicada.c +++ b/drivers/net/phy/cicada.c @@ -103,7 +103,22 @@ static int cis820x_config_intr(struct phy_device *phydev) return err; } -/* Cicada 820x */ +/* Cicada 8201, a.k.a Vitesse VSC8201 */ +static struct phy_driver cis8201_driver = { + .phy_id = 0x000fc410, + .name = "Cicada Cis8201", + .phy_id_mask = 0x000ffff0, + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &cis820x_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &cis820x_ack_interrupt, + .config_intr = &cis820x_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +/* Cicada 8204 */ static struct phy_driver cis8204_driver = { .phy_id = 0x000fc440, .name = "Cicada Cis8204", @@ -118,15 +133,30 @@ static struct phy_driver cis8204_driver = { .driver = { .owner = THIS_MODULE,}, }; -static int __init cis8204_init(void) +static int __init cicada_init(void) { - return phy_driver_register(&cis8204_driver); + int ret; + + ret = phy_driver_register(&cis8204_driver); + if (ret) + goto err1; + + ret = phy_driver_register(&cis8201_driver); + if (ret) + goto err2; + return 0; + +err2: + phy_driver_unregister(&cis8204_driver); +err1: + return ret; } -static void __exit cis8204_exit(void) +static void __exit cicada_exit(void) { phy_driver_unregister(&cis8204_driver); + phy_driver_unregister(&cis8201_driver); } -module_init(cis8204_init); -module_exit(cis8204_exit); +module_init(cicada_init); +module_exit(cicada_exit); diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 16a0ef1b136..4c2f575faad 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1406,7 +1406,7 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, dev = alloc_etherdev(sizeof (*tp)); if (dev == NULL) { if (netif_msg_drv(&debug)) - printk(KERN_ERR PFX "unable to alloc new ethernet\n"); + dev_err(&pdev->dev, "unable to alloc new ethernet\n"); goto err_out; } @@ -1418,10 +1418,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* enable device (incl. PCI PM wakeup and hotplug setup) */ rc = pci_enable_device(pdev); if (rc < 0) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX "%s: enable failure\n", - pci_name(pdev)); - } + if (netif_msg_probe(tp)) + dev_err(&pdev->dev, "enable failure\n"); goto err_out_free_dev; } @@ -1437,37 +1435,32 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command); acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK; } else { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX + if (netif_msg_probe(tp)) + dev_err(&pdev->dev, "PowerManagement capability not found.\n"); - } } /* make sure PCI base addr 1 is MMIO */ if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX + if (netif_msg_probe(tp)) + dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n"); - } rc = -ENODEV; goto err_out_mwi; } /* check for weird/broken PCI region reporting */ if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX + if (netif_msg_probe(tp)) + dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n"); - } rc = -ENODEV; goto err_out_mwi; } rc = pci_request_regions(pdev, MODULENAME); if (rc < 0) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX "%s: could not request regions.\n", - pci_name(pdev)); - } + if (netif_msg_probe(tp)) + dev_err(&pdev->dev, "could not request regions.\n"); goto err_out_mwi; } @@ -1480,10 +1473,9 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } else { rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc < 0) { - if (netif_msg_probe(tp)) { - printk(KERN_ERR PFX + if (netif_msg_probe(tp)) + dev_err(&pdev->dev, "DMA configuration failed.\n"); - } goto err_out_free_res; } } @@ -1494,7 +1486,7 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE); if (ioaddr == NULL) { if (netif_msg_probe(tp)) - printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); + dev_err(&pdev->dev, "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } @@ -1526,9 +1518,9 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, if (i < 0) { /* Unknown chip: assume array element #0, original RTL-8169 */ if (netif_msg_probe(tp)) { - printk(KERN_DEBUG PFX "PCI device %s: " + dev_printk(KERN_DEBUG, &pdev->dev, "unknown chip version, assuming %s\n", - pci_name(pdev), rtl_chip_info[0].name); + rtl_chip_info[0].name); } i++; } diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index ed1f59901ff..c0a62b00ffc 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -22,129 +22,13 @@ Support and updates available at http://www.scyld.com/network/starfire.html + [link no longer provides useful info -jgarzik] - ----------------------------------------------------------- - - Linux kernel-specific changes: - - LK1.1.1 (jgarzik): - - Use PCI driver interface - - Fix MOD_xxx races - - softnet fixups - - LK1.1.2 (jgarzik): - - Merge Becker version 0.15 - - LK1.1.3 (Andrew Morton) - - Timer cleanups - - LK1.1.4 (jgarzik): - - Merge Becker version 1.03 - - LK1.2.1 (Ion Badulescu <ionut@cs.columbia.edu>) - - Support hardware Rx/Tx checksumming - - Use the GFP firmware taken from Adaptec's Netware driver - - LK1.2.2 (Ion Badulescu) - - Backported to 2.2.x - - LK1.2.3 (Ion Badulescu) - - Fix the flaky mdio interface - - More compat clean-ups - - LK1.2.4 (Ion Badulescu) - - More 2.2.x initialization fixes - - LK1.2.5 (Ion Badulescu) - - Several fixes from Manfred Spraul - - LK1.2.6 (Ion Badulescu) - - Fixed ifup/ifdown/ifup problem in 2.4.x - - LK1.2.7 (Ion Badulescu) - - Removed unused code - - Made more functions static and __init - - LK1.2.8 (Ion Badulescu) - - Quell bogus error messages, inform about the Tx threshold - - Removed #ifdef CONFIG_PCI, this driver is PCI only - - LK1.2.9 (Ion Badulescu) - - Merged Jeff Garzik's changes from 2.4.4-pre5 - - Added 2.2.x compatibility stuff required by the above changes - - LK1.2.9a (Ion Badulescu) - - More updates from Jeff Garzik - - LK1.3.0 (Ion Badulescu) - - Merged zerocopy support - - LK1.3.1 (Ion Badulescu) - - Added ethtool support - - Added GPIO (media change) interrupt support - - LK1.3.2 (Ion Badulescu) - - Fixed 2.2.x compatibility issues introduced in 1.3.1 - - Fixed ethtool ioctl returning uninitialized memory - - LK1.3.3 (Ion Badulescu) - - Initialize the TxMode register properly - - Don't dereference dev->priv after freeing it - - LK1.3.4 (Ion Badulescu) - - Fixed initialization timing problems - - Fixed interrupt mask definitions - - LK1.3.5 (jgarzik) - - ethtool NWAY_RST, GLINK, [GS]MSGLVL support - - LK1.3.6: - - Sparc64 support and fixes (Ion Badulescu) - - Better stats and error handling (Ion Badulescu) - - Use new pci_set_mwi() PCI API function (jgarzik) - - LK1.3.7 (Ion Badulescu) - - minimal implementation of tx_timeout() - - correctly shutdown the Rx/Tx engines in netdev_close() - - added calls to netif_carrier_on/off - (patch from Stefan Rompf <srompf@isg.de>) - - VLAN support - - LK1.3.8 (Ion Badulescu) - - adjust DMA burst size on sparc64 - - 64-bit support - - reworked zerocopy support for 64-bit buffers - - working and usable interrupt mitigation/latency - - reduced Tx interrupt frequency for lower interrupt overhead - - LK1.3.9 (Ion Badulescu) - - bugfix for mcast filter - - enable the right kind of Tx interrupts (TxDMADone, not TxDone) - - LK1.4.0 (Ion Badulescu) - - NAPI support - - LK1.4.1 (Ion Badulescu) - - flush PCI posting buffers after disabling Rx interrupts - - put the chip to a D3 slumber on driver unload - - added config option to enable/disable NAPI - - LK1.4.2 (Ion Badulescu) - - finally added firmware (GPL'ed by Adaptec) - - removed compatibility code for 2.2.x - - LK1.4.2.1 (Ion Badulescu) - - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM - - added 32-bit padding to outgoing skb's, removed previous workaround - -TODO: - fix forced speed/duplexing code (broken a long time ago, when - somebody converted the driver to use the generic MII code) - - fix VLAN support */ #define DRV_NAME "starfire" -#define DRV_VERSION "1.03+LK1.4.2.1" -#define DRV_RELDATE "October 3, 2005" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "June 27, 2006" #include <linux/module.h> #include <linux/kernel.h> @@ -846,7 +730,6 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, goto err_out_free_netdev; } - /* ioremap is borken in Linux-2.2.x/sparc64 */ base = ioremap(ioaddr, io_size); if (!base) { printk(KERN_ERR DRV_NAME " %d: cannot remap %#x @ %#lx, aborting\n", diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c index 643fceae3db..ac17377b3e9 100644 --- a/drivers/net/sundance.c +++ b/drivers/net/sundance.c @@ -16,91 +16,13 @@ Support and updates available at http://www.scyld.com/network/sundance.html + [link no longer provides useful info -jgarzik] - - Version LK1.01a (jgarzik): - - Replace some MII-related magic numbers with constants - - Version LK1.02 (D-Link): - - Add new board to PCI ID list - - Fix multicast bug - - Version LK1.03 (D-Link): - - New Rx scheme, reduce Rx congestion - - Option to disable flow control - - Version LK1.04 (D-Link): - - Tx timeout recovery - - More support for ethtool. - - Version LK1.04a: - - Remove unused/constant members from struct pci_id_info - (which then allows removal of 'drv_flags' from private struct) - (jgarzik) - - If no phy is found, fail to load that board (jgarzik) - - Always start phy id scan at id 1 to avoid problems (Donald Becker) - - Autodetect where mii_preable_required is needed, - default to not needed. (Donald Becker) - - Version LK1.04b: - - Remove mii_preamble_required module parameter (Donald Becker) - - Add per-interface mii_preamble_required (setting is autodetected) - (Donald Becker) - - Remove unnecessary cast from void pointer (jgarzik) - - Re-align comments in private struct (jgarzik) - - Version LK1.04c (jgarzik): - - Support bitmapped message levels (NETIF_MSG_xxx), and the - two ethtool ioctls that get/set them - - Don't hand-code MII ethtool support, use standard API/lib - - Version LK1.04d: - - Merge from Donald Becker's sundance.c: (Jason Lunz) - * proper support for variably-sized MTUs - * default to PIO, to fix chip bugs - - Add missing unregister_netdev (Jason Lunz) - - Add CONFIG_SUNDANCE_MMIO config option (jgarzik) - - Better rx buf size calculation (Donald Becker) - - Version LK1.05 (D-Link): - - Fix DFE-580TX packet drop issue (for DL10050C) - - Fix reset_tx logic - - Version LK1.06 (D-Link): - - Fix crash while unloading driver - - Versin LK1.06b (D-Link): - - New tx scheme, adaptive tx_coalesce - - Version LK1.07 (D-Link): - - Fix tx bugs in big-endian machines - - Remove unused max_interrupt_work module parameter, the new - NAPI-like rx scheme doesn't need it. - - Remove redundancy get_stats() in intr_handler(), those - I/O access could affect performance in ARM-based system - - Add Linux software VLAN support - - Version LK1.08 (Philippe De Muyter phdm@macqel.be): - - Fix bug of custom mac address - (StationAddr register only accept word write) - - Version LK1.09 (D-Link): - - Fix the flowctrl bug. - - Set Pause bit in MII ANAR if flow control enabled. - - Version LK1.09a (ICPlus): - - Add the delay time in reading the contents of EEPROM - - Version LK1.10 (Philippe De Muyter phdm@macqel.be): - - Make 'unblock interface after Tx underrun' work - - Version LK1.11 (Pedro Alejandro Lopez-Valencia palopezv at gmail.com): - - Add support for IC Plus Corporation IP100A chipset */ #define DRV_NAME "sundance" -#define DRV_VERSION "1.01+LK1.11" -#define DRV_RELDATE "14-Jun-2006" +#define DRV_VERSION "1.1" +#define DRV_RELDATE "27-Jun-2006" /* The user-configurable values. @@ -282,15 +204,15 @@ IVc. Errata #define USE_IO_OPS 1 #endif -static struct pci_device_id sundance_pci_tbl[] = { - {0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0}, - {0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1}, - {0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2}, - {0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3}, - {0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, - {0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5}, - {0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6}, - {0,} +static const struct pci_device_id sundance_pci_tbl[] = { + { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 }, + { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 }, + { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 }, + { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 }, + { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, + { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, + { } }; MODULE_DEVICE_TABLE(pci, sundance_pci_tbl); @@ -301,7 +223,7 @@ enum { struct pci_id_info { const char *name; }; -static const struct pci_id_info pci_id_tbl[] = { +static const struct pci_id_info pci_id_tbl[] __devinitdata = { {"D-Link DFE-550TX FAST Ethernet Adapter"}, {"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"}, {"D-Link DFE-580TX 4 port Server Adapter"}, @@ -309,7 +231,7 @@ static const struct pci_id_info pci_id_tbl[] = { {"D-Link DL10050-based FAST Ethernet Adapter"}, {"Sundance Technology Alta"}, {"IC Plus Corporation IP100A FAST Ethernet Adapter"}, - {NULL,}, /* 0 terminated list. */ + { } /* terminate list. */ }; /* This driver was written to use PCI memory space, however x86-oriented diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c index b4c0d101a7d..7f414815cc6 100644 --- a/drivers/net/tulip/winbond-840.c +++ b/drivers/net/tulip/winbond-840.c @@ -224,24 +224,21 @@ static const struct pci_device_id w840_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, w840_pci_tbl); +enum { + netdev_res_size = 128, /* size of PCI BAR resource */ +}; + struct pci_id_info { const char *name; - struct match_info { - int pci, pci_mask, subsystem, subsystem_mask; - int revision, revision_mask; /* Only 8 bits. */ - } id; - int io_size; /* Needed for I/O region check or ioremap(). */ - int drv_flags; /* Driver use, intended as capability flags. */ + int drv_flags; /* Driver use, intended as capability flags. */ }; -static struct pci_id_info pci_id_tbl[] = { - {"Winbond W89c840", /* Sometime a Level-One switch card. */ - { 0x08401050, 0xffffffff, 0x81530000, 0xffff0000 }, - 128, CanHaveMII | HasBrokenTx | FDXOnNoMII}, - {"Winbond W89c840", { 0x08401050, 0xffffffff, }, - 128, CanHaveMII | HasBrokenTx}, - {"Compex RL100-ATX", { 0x201111F6, 0xffffffff,}, - 128, CanHaveMII | HasBrokenTx}, - {NULL,}, /* 0 terminated list. */ + +static const struct pci_id_info pci_id_tbl[] __devinitdata = { + { /* Sometime a Level-One switch card. */ + "Winbond W89c840", CanHaveMII | HasBrokenTx | FDXOnNoMII}, + { "Winbond W89c840", CanHaveMII | HasBrokenTx}, + { "Compex RL100-ATX", CanHaveMII | HasBrokenTx}, + { } /* terminate list. */ }; /* This driver was written to use PCI memory space, however some x86 systems @@ -399,7 +396,7 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, #ifdef USE_IO_OPS bar = 0; #endif - ioaddr = pci_iomap(pdev, bar, pci_id_tbl[chip_idx].io_size); + ioaddr = pci_iomap(pdev, bar, netdev_res_size); if (!ioaddr) goto err_out_free_res; diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c index 091ebb7a62f..17ca7dc42e6 100644 --- a/drivers/net/tulip/xircom_tulip_cb.c +++ b/drivers/net/tulip/xircom_tulip_cb.c @@ -10,26 +10,11 @@ 410 Severn Ave., Suite 210 Annapolis MD 21403 - ----------------------------------------------------------- - - Linux kernel-specific changes: - - LK1.0 (Ion Badulescu) - - Major cleanup - - Use 2.4 PCI API - - Support ethtool - - Rewrite perfect filter/hash code - - Use interrupts for media changes - - LK1.1 (Ion Badulescu) - - Disallow negotiation of unsupported full-duplex modes */ #define DRV_NAME "xircom_tulip_cb" -#define DRV_VERSION "0.91+LK1.1" -#define DRV_RELDATE "October 11, 2001" - -#define CARDBUS 1 +#define DRV_VERSION "0.92" +#define DRV_RELDATE "June 27, 2006" /* A few user-configurable values. */ @@ -306,10 +291,10 @@ struct xircom_private { struct xircom_tx_desc tx_ring[TX_RING_SIZE]; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ struct sk_buff* tx_skbuff[TX_RING_SIZE]; -#ifdef CARDBUS + /* The X3201-3 requires 4-byte aligned tx bufs */ struct sk_buff* tx_aligned_skbuff[TX_RING_SIZE]; -#endif + /* The addresses of receive-in-place skbuffs. */ struct sk_buff* rx_skbuff[RX_RING_SIZE]; u16 setup_frame[PKT_SETUP_SZ / sizeof(u16)]; /* Pseudo-Tx frame to init address table. */ @@ -908,10 +893,8 @@ static void xircom_init_ring(struct net_device *dev) tp->tx_skbuff[i] = NULL; tp->tx_ring[i].status = 0; tp->tx_ring[i].buffer2 = virt_to_bus(&tp->tx_ring[i+1]); -#ifdef CARDBUS if (tp->chip_id == X3201_3) tp->tx_aligned_skbuff[i] = dev_alloc_skb(PKT_BUF_SZ); -#endif /* CARDBUS */ } tp->tx_ring[i-1].buffer2 = virt_to_bus(&tp->tx_ring[0]); } @@ -931,12 +914,10 @@ xircom_start_xmit(struct sk_buff *skb, struct net_device *dev) entry = tp->cur_tx % TX_RING_SIZE; tp->tx_skbuff[entry] = skb; -#ifdef CARDBUS if (tp->chip_id == X3201_3) { memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len); tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data); } else -#endif tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data); if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */ diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c index 98b6f3207d3..d3d0ec97031 100644 --- a/drivers/net/via-rhine.c +++ b/drivers/net/via-rhine.c @@ -25,117 +25,13 @@ version. He may or may not be interested in bug reports on this code. You can find his versions at: http://www.scyld.com/network/via-rhine.html - - - Linux kernel version history: - - LK1.1.0: - - Jeff Garzik: softnet 'n stuff - - LK1.1.1: - - Justin Guyett: softnet and locking fixes - - Jeff Garzik: use PCI interface - - LK1.1.2: - - Urban Widmark: minor cleanups, merges from Becker 1.03a/1.04 versions - - LK1.1.3: - - Urban Widmark: use PCI DMA interface (with thanks to the eepro100.c - code) update "Theory of Operation" with - softnet/locking changes - - Dave Miller: PCI DMA and endian fixups - - Jeff Garzik: MOD_xxx race fixes, updated PCI resource allocation - - LK1.1.4: - - Urban Widmark: fix gcc 2.95.2 problem and - remove writel's to fixed address 0x7c - - LK1.1.5: - - Urban Widmark: mdio locking, bounce buffer changes - merges from Beckers 1.05 version - added netif_running_on/off support - - LK1.1.6: - - Urban Widmark: merges from Beckers 1.08b version (VT6102 + mdio) - set netif_running_on/off on startup, del_timer_sync - - LK1.1.7: - - Manfred Spraul: added reset into tx_timeout - - LK1.1.9: - - Urban Widmark: merges from Beckers 1.10 version - (media selection + eeprom reload) - - David Vrabel: merges from D-Link "1.11" version - (disable WOL and PME on startup) - - LK1.1.10: - - Manfred Spraul: use "singlecopy" for unaligned buffers - don't allocate bounce buffers for !ReqTxAlign cards - - LK1.1.11: - - David Woodhouse: Set dev->base_addr before the first time we call - wait_for_reset(). It's a lot happier that way. - Free np->tx_bufs only if we actually allocated it. - - LK1.1.12: - - Martin Eriksson: Allow Memory-Mapped IO to be enabled. - - LK1.1.13 (jgarzik): - - Add ethtool support - - Replace some MII-related magic numbers with constants - - LK1.1.14 (Ivan G.): - - fixes comments for Rhine-III - - removes W_MAX_TIMEOUT (unused) - - adds HasDavicomPhy for Rhine-I (basis: linuxfet driver; my card - is R-I and has Davicom chip, flag is referenced in kernel driver) - - sends chip_id as a parameter to wait_for_reset since np is not - initialized on first call - - changes mmio "else if (chip_id==VT6102)" to "else" so it will work - for Rhine-III's (documentation says same bit is correct) - - transmit frame queue message is off by one - fixed - - adds IntrNormalSummary to "Something Wicked" exclusion list - so normal interrupts will not trigger the message (src: Donald Becker) - (Roger Luethi) - - show confused chip where to continue after Tx error - - location of collision counter is chip specific - - allow selecting backoff algorithm (module parameter) - - LK1.1.15 (jgarzik): - - Use new MII lib helper generic_mii_ioctl - - LK1.1.16 (Roger Luethi) - - Etherleak fix - - Handle Tx buffer underrun - - Fix bugs in full duplex handling - - New reset code uses "force reset" cmd on Rhine-II - - Various clean ups - - LK1.1.17 (Roger Luethi) - - Fix race in via_rhine_start_tx() - - On errors, wait for Tx engine to turn off before scavenging - - Handle Tx descriptor write-back race on Rhine-II - - Force flushing for PCI posted writes - - More reset code changes - - LK1.1.18 (Roger Luethi) - - No filtering multicast in promisc mode (Edward Peng) - - Fix for Rhine-I Tx timeouts - - LK1.1.19 (Roger Luethi) - - Increase Tx threshold for unspecified errors - - LK1.2.0-2.6 (Roger Luethi) - - Massive clean-up - - Rewrite PHY, media handling (remove options, full_duplex, backoff) - - Fix Tx engine race for good - - Craig Brind: Zero padded aligned buffers for short packets. + [link no longer provides useful info -jgarzik] */ #define DRV_NAME "via-rhine" -#define DRV_VERSION "1.2.0-2.6" -#define DRV_RELDATE "June-10-2004" +#define DRV_VERSION "1.4.0" +#define DRV_RELDATE "June-27-2006" /* A few user-configurable values. @@ -356,12 +252,11 @@ enum rhine_quirks { /* Beware of PCI posted writes */ #define IOSYNC do { ioread8(ioaddr + StationAddr); } while (0) -static struct pci_device_id rhine_pci_tbl[] = -{ - {0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT86C100A */ - {0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6102 */ - {0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* 6105{,L,LOM} */ - {0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, /* VT6105M */ +static const struct pci_device_id rhine_pci_tbl[] = { + { 0x1106, 0x3043, PCI_ANY_ID, PCI_ANY_ID, }, /* VT86C100A */ + { 0x1106, 0x3065, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6102 */ + { 0x1106, 0x3106, PCI_ANY_ID, PCI_ANY_ID, }, /* 6105{,L,LOM} */ + { 0x1106, 0x3053, PCI_ANY_ID, PCI_ANY_ID, }, /* VT6105M */ { } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, rhine_pci_tbl); diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index ba2972ba375..f5b0078eb4a 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -229,7 +229,8 @@ static int rx_copybreak = 200; module_param(rx_copybreak, int, 0644); MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); -static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, struct velocity_info_tbl *info); +static void velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, + const struct velocity_info_tbl *info); static int velocity_get_pci_info(struct velocity_info *, struct pci_dev *pdev); static void velocity_print_info(struct velocity_info *vptr); static int velocity_open(struct net_device *dev); @@ -294,9 +295,9 @@ static void velocity_unregister_notifier(void) * Internal board variants. At the moment we have only one */ -static struct velocity_info_tbl chip_info_table[] = { - {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 256, 1, 0x00FFFFFFUL}, - {0, NULL} +static const struct velocity_info_tbl chip_info_table[] __devinitdata = { + {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL}, + { } }; /* @@ -304,10 +305,9 @@ static struct velocity_info_tbl chip_info_table[] = { * device driver. Used for hotplug autoloading. */ -static struct pci_device_id velocity_id_table[] __devinitdata = { - {PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, (unsigned long) chip_info_table}, - {0, } +static const struct pci_device_id velocity_id_table[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) }, + { } }; MODULE_DEVICE_TABLE(pci, velocity_id_table); @@ -341,7 +341,7 @@ static char __devinit *get_chip_name(enum chip_type chip_id) static void __devexit velocity_remove1(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); #ifdef CONFIG_PM unsigned long flags; @@ -686,21 +686,23 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi static int first = 1; struct net_device *dev; int i; - struct velocity_info_tbl *info = (struct velocity_info_tbl *) ent->driver_data; + const struct velocity_info_tbl *info = &chip_info_table[ent->driver_data]; struct velocity_info *vptr; struct mac_regs __iomem * regs; int ret = -ENOMEM; + /* FIXME: this driver, like almost all other ethernet drivers, + * can support more than MAX_UNITS. + */ if (velocity_nics >= MAX_UNITS) { - printk(KERN_NOTICE VELOCITY_NAME ": already found %d NICs.\n", - velocity_nics); + dev_notice(&pdev->dev, "already found %d NICs.\n", + velocity_nics); return -ENODEV; } dev = alloc_etherdev(sizeof(struct velocity_info)); - - if (dev == NULL) { - printk(KERN_ERR VELOCITY_NAME ": allocate net device failed.\n"); + if (!dev) { + dev_err(&pdev->dev, "allocate net device failed.\n"); goto out; } @@ -708,7 +710,7 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); - vptr = dev->priv; + vptr = netdev_priv(dev); if (first) { @@ -731,17 +733,17 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi ret = velocity_get_pci_info(vptr, pdev); if (ret < 0) { - printk(KERN_ERR VELOCITY_NAME ": Failed to find PCI device.\n"); + /* error message already printed */ goto err_disable; } ret = pci_request_regions(pdev, VELOCITY_NAME); if (ret < 0) { - printk(KERN_ERR VELOCITY_NAME ": Failed to find PCI device.\n"); + dev_err(&pdev->dev, "No PCI resources.\n"); goto err_disable; } - regs = ioremap(vptr->memaddr, vptr->io_size); + regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE); if (regs == NULL) { ret = -EIO; goto err_release_res; @@ -859,13 +861,14 @@ static void __devinit velocity_print_info(struct velocity_info *vptr) * discovered. */ -static void __devinit velocity_init_info(struct pci_dev *pdev, struct velocity_info *vptr, struct velocity_info_tbl *info) +static void __devinit velocity_init_info(struct pci_dev *pdev, + struct velocity_info *vptr, + const struct velocity_info_tbl *info) { memset(vptr, 0, sizeof(struct velocity_info)); vptr->pdev = pdev; vptr->chip_id = info->chip_id; - vptr->io_size = info->io_size; vptr->num_txq = info->txqueue; vptr->multicast_limit = MCAM_SIZE; spin_lock_init(&vptr->lock); @@ -883,8 +886,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev, struct velocity_i static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev) { - - if(pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0) + if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0) return -EIO; pci_set_master(pdev); @@ -892,24 +894,20 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc vptr->ioaddr = pci_resource_start(pdev, 0); vptr->memaddr = pci_resource_start(pdev, 1); - if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) - { - printk(KERN_ERR "%s: region #0 is not an I/O resource, aborting.\n", - pci_name(pdev)); + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) { + dev_err(&pdev->dev, + "region #0 is not an I/O resource, aborting.\n"); return -EINVAL; } - if((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) - { - printk(KERN_ERR "%s: region #1 is an I/O resource, aborting.\n", - pci_name(pdev)); + if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) { + dev_err(&pdev->dev, + "region #1 is an I/O resource, aborting.\n"); return -EINVAL; } - if(pci_resource_len(pdev, 1) < 256) - { - printk(KERN_ERR "%s: region #1 is too small.\n", - pci_name(pdev)); + if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) { + dev_err(&pdev->dev, "region #1 is too small.\n"); return -EINVAL; } vptr->pdev = pdev; @@ -1728,7 +1726,7 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_ static int velocity_open(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); int ret; vptr->rx_buf_sz = (dev->mtu <= 1504 ? PKT_BUF_SZ : dev->mtu + 32); @@ -1785,7 +1783,7 @@ err_free_desc_rings: static int velocity_change_mtu(struct net_device *dev, int new_mtu) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); unsigned long flags; int oldmtu = dev->mtu; int ret = 0; @@ -1861,7 +1859,7 @@ static void velocity_shutdown(struct velocity_info *vptr) static int velocity_close(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); netif_stop_queue(dev); velocity_shutdown(vptr); @@ -1894,7 +1892,7 @@ static int velocity_close(struct net_device *dev) static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); int qnum = 0; struct tx_desc *td_ptr; struct velocity_td_info *tdinfo; @@ -2049,7 +2047,7 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs) { struct net_device *dev = dev_instance; - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); u32 isr_status; int max_count = 0; @@ -2104,7 +2102,7 @@ static int velocity_intr(int irq, void *dev_instance, struct pt_regs *regs) static void velocity_set_multi(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; u8 rx_mode; int i; @@ -2153,7 +2151,7 @@ static void velocity_set_multi(struct net_device *dev) static struct net_device_stats *velocity_get_stats(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); /* If the hardware is down, don't touch MII */ if(!netif_running(dev)) @@ -2196,7 +2194,7 @@ static struct net_device_stats *velocity_get_stats(struct net_device *dev) static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); int ret; /* If we are asked for information and the device is power @@ -2825,7 +2823,7 @@ static void enable_flow_control_ability(struct velocity_info *vptr) static int velocity_ethtool_up(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); if (!netif_running(dev)) pci_set_power_state(vptr->pdev, PCI_D0); return 0; @@ -2841,14 +2839,14 @@ static int velocity_ethtool_up(struct net_device *dev) static void velocity_ethtool_down(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); if (!netif_running(dev)) pci_set_power_state(vptr->pdev, PCI_D3hot); } static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; u32 status; status = check_connection_type(vptr->mac_regs); @@ -2873,7 +2871,7 @@ static int velocity_get_settings(struct net_device *dev, struct ethtool_cmd *cmd static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); u32 curr_status; u32 new_status = 0; int ret = 0; @@ -2896,14 +2894,14 @@ static int velocity_set_settings(struct net_device *dev, struct ethtool_cmd *cmd static u32 velocity_get_link(struct net_device *dev) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, ®s->PHYSR0) ? 0 : 1; } static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); strcpy(info->driver, VELOCITY_NAME); strcpy(info->version, VELOCITY_VERSION); strcpy(info->bus_info, pci_name(vptr->pdev)); @@ -2911,7 +2909,7 @@ static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP; wol->wolopts |= WAKE_MAGIC; /* @@ -2927,7 +2925,7 @@ static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_woli static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP))) return -EFAULT; @@ -2992,7 +2990,7 @@ static struct ethtool_ops velocity_ethtool_ops = { static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { - struct velocity_info *vptr = dev->priv; + struct velocity_info *vptr = netdev_priv(dev); struct mac_regs __iomem * regs = vptr->mac_regs; unsigned long flags; struct mii_ioctl_data *miidata = if_mii(ifr); diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h index f1b2640ebdc..496c3d59744 100644 --- a/drivers/net/via-velocity.h +++ b/drivers/net/via-velocity.h @@ -31,6 +31,8 @@ #define VELOCITY_FULL_DRV_NAM "VIA Networking Velocity Family Gigabit Ethernet Adapter Driver" #define VELOCITY_VERSION "1.13" +#define VELOCITY_IO_SIZE 256 + #define PKT_BUF_SZ 1540 #define MAX_UNITS 8 @@ -1191,7 +1193,6 @@ enum chip_type { struct velocity_info_tbl { enum chip_type chip_id; char *name; - int io_size; int txqueue; u32 flags; }; @@ -1751,7 +1752,6 @@ struct velocity_info { struct mac_regs __iomem * mac_regs; unsigned long memaddr; unsigned long ioaddr; - u32 io_size; u8 rev_id; diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index b5328b0ff92..54b8e492ef9 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -134,18 +134,6 @@ config SEALEVEL_4021 The driver will be compiled as a module: the module will be called sealevel. -config SYNCLINK_SYNCPPP - tristate "SyncLink HDLC/SYNCPPP support" - depends on WAN - help - Enables HDLC/SYNCPPP support for the SyncLink WAN driver. - - Normally the SyncLink WAN driver works with the main PPP driver - <file:drivers/net/ppp_generic.c> and pppd program. - HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver - <file:drivers/net/wan/syncppp.c>. The SyncLink WAN driver (in - character devices) must also be enabled. - # Generic HDLC config HDLC tristate "Generic HDLC layer" diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 823c6d5ab90..316ca6869d5 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -28,7 +28,6 @@ obj-$(CONFIG_COSA) += syncppp.o cosa.o obj-$(CONFIG_FARSYNC) += syncppp.o farsync.o obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_LANMEDIA) += syncppp.o -obj-$(CONFIG_SYNCLINK_SYNCPPP) += syncppp.o obj-$(CONFIG_X25_ASY) += x25_asy.o obj-$(CONFIG_LANMEDIA) += lmc/ diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 30ec235e693..fa9d2c4edc9 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -550,6 +550,7 @@ config USB_ZD1201 source "drivers/net/wireless/hostap/Kconfig" source "drivers/net/wireless/bcm43xx/Kconfig" +source "drivers/net/wireless/zd1211rw/Kconfig" # yes, this works even when no drivers are selected config NET_WIRELESS diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index 512603de309..c613af17a15 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_PRISM54) += prism54/ obj-$(CONFIG_HOSTAP) += hostap/ obj-$(CONFIG_BCM43XX) += bcm43xx/ +obj-$(CONFIG_ZD1211RW) += zd1211rw/ # 16-bit wireless PCMCIA client drivers obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index d8f5600578b..e1c5a939bca 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -1885,6 +1885,15 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re spin_lock(&bcm->irq_lock); + /* Only accept IRQs, if we are initialized properly. + * This avoids an RX race while initializing. + * We should probably not enable IRQs before we are initialized + * completely, but some careful work is needed to fix this. I think it + * is best to stay with this cheap workaround for now... . + */ + if (unlikely(bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED)) + goto out; + reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); if (reason == 0xffffffff) { /* irq not for us (shared irq) */ @@ -1906,19 +1915,11 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re bcm43xx_interrupt_ack(bcm, reason); - /* Only accept IRQs, if we are initialized properly. - * This avoids an RX race while initializing. - * We should probably not enable IRQs before we are initialized - * completely, but some careful work is needed to fix this. I think it - * is best to stay with this cheap workaround for now... . - */ - if (likely(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED)) { - /* disable all IRQs. They are enabled again in the bottom half. */ - bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); - /* save the reason code and call our bottom half. */ - bcm->irq_reason = reason; - tasklet_schedule(&bcm->isr_tasklet); - } + /* disable all IRQs. They are enabled again in the bottom half. */ + bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); + /* save the reason code and call our bottom half. */ + bcm->irq_reason = reason; + tasklet_schedule(&bcm->isr_tasklet); out: mmiowb(); @@ -3698,6 +3699,10 @@ static void bcm43xx_ieee80211_set_security(struct net_device *net_dev, secinfo->encrypt = sec->encrypt; dprintk(", .encrypt = %d", sec->encrypt); } + if (sec->flags & SEC_AUTH_MODE) { + secinfo->auth_mode = sec->auth_mode; + dprintk(", .auth_mode = %d\n", sec->auth_mode); + } dprintk("\n"); if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED && !bcm->ieee->host_encrypt) { diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h index 30a202b258b..116493671f8 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h @@ -112,30 +112,6 @@ int bcm43xx_channel_to_freq(struct bcm43xx_private *bcm, return bcm43xx_channel_to_freq_bg(channel); } -/* Lightweight function to check if a channel number is valid. - * Note that this does _NOT_ check for geographical restrictions! - */ -static inline -int bcm43xx_is_valid_channel_a(u8 channel) -{ - return (channel >= IEEE80211_52GHZ_MIN_CHANNEL - && channel <= IEEE80211_52GHZ_MAX_CHANNEL); -} -static inline -int bcm43xx_is_valid_channel_bg(u8 channel) -{ - return (channel >= IEEE80211_24GHZ_MIN_CHANNEL - && channel <= IEEE80211_24GHZ_MAX_CHANNEL); -} -static inline -int bcm43xx_is_valid_channel(struct bcm43xx_private *bcm, - u8 channel) -{ - if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A) - return bcm43xx_is_valid_channel_a(channel); - return bcm43xx_is_valid_channel_bg(channel); -} - void bcm43xx_tsf_read(struct bcm43xx_private *bcm, u64 *tsf); void bcm43xx_tsf_write(struct bcm43xx_private *bcm, u64 tsf); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c index af5c0bff169..bb9c484d7e1 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_radio.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_radio.c @@ -1594,11 +1594,11 @@ int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, u16 r8, tmp; u16 freq; + if (!ieee80211_is_valid_channel(bcm->ieee, channel)) + return -EINVAL; if ((radio->manufact == 0x17F) && (radio->version == 0x2060) && (radio->revision == 1)) { - if (channel > 200) - return -EINVAL; freq = channel2freq_a(channel); r8 = bcm43xx_radio_read16(bcm, 0x0008); @@ -1651,9 +1651,6 @@ int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, TODO(); //TODO: TSSI2dbm workaround bcm43xx_phy_xmitpower(bcm);//FIXME correct? } else { - if ((channel < 1) || (channel > 14)) - return -EINVAL; - if (synthetic_pu_workaround) bcm43xx_synth_pu_workaround(bcm, channel); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c index c35cb3a0777..5c36e29efff 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c @@ -119,7 +119,7 @@ static int bcm43xx_wx_set_channelfreq(struct net_device *net_dev, channel = bcm43xx_freq_to_channel(bcm, data->freq.m); freq = data->freq.m; } - if (!bcm43xx_is_valid_channel(bcm, channel)) + if (!ieee80211_is_valid_channel(bcm->ieee, channel)) goto out_unlock; if (bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED) { //ieee80211softmac_disassoc(softmac, $REASON); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c index d8ece28c079..6dbd855b364 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c @@ -296,11 +296,14 @@ void bcm43xx_generate_txhdr(struct bcm43xx_private *bcm, u16 control = 0; u16 wsec_rate = 0; u16 encrypt_frame; + const u16 ftype = WLAN_FC_GET_TYPE(le16_to_cpu(wireless_header->frame_ctl)); + const int is_mgt = (ftype == IEEE80211_FTYPE_MGMT); /* Now construct the TX header. */ memset(txhdr, 0, sizeof(*txhdr)); - bitrate = bcm->softmac->txrates.default_rate; + bitrate = ieee80211softmac_suggest_txrate(bcm->softmac, + is_multicast_ether_addr(wireless_header->addr1), is_mgt); ofdm_modulation = !(ieee80211_is_cck_rate(bitrate)); fallback_bitrate = bcm43xx_calc_fallback_rate(bitrate); fallback_ofdm_modulation = !(ieee80211_is_cck_rate(fallback_bitrate)); diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 49860fa61c3..6dfa041be66 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -66,10 +66,12 @@ static struct pci_device_id prism2_plx_id_table[] __devinitdata = { PLXDEV(0x10b7, 0x7770, "3Com AirConnect PCI 777A"), PLXDEV(0x111a, 0x1023, "Siemens SpeedStream SS1023"), PLXDEV(0x126c, 0x8030, "Nortel emobility"), + PLXDEV(0x1562, 0x0001, "Symbol LA-4123"), PLXDEV(0x1385, 0x4100, "Netgear MA301"), PLXDEV(0x15e8, 0x0130, "National Datacomm NCP130 (PLX9052)"), PLXDEV(0x15e8, 0x0131, "National Datacomm NCP130 (TMD7160)"), PLXDEV(0x1638, 0x1100, "Eumitcom WL11000"), + PLXDEV(0x16ab, 0x1100, "Global Sun Tech GL24110P"), PLXDEV(0x16ab, 0x1101, "Global Sun Tech GL24110P (?)"), PLXDEV(0x16ab, 0x1102, "Linksys WPC11 with WDT11"), PLXDEV(0x16ab, 0x1103, "Longshine 8031"), diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig new file mode 100644 index 00000000000..66ed55bc546 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/Kconfig @@ -0,0 +1,19 @@ +config ZD1211RW + tristate "ZyDAS ZD1211/ZD1211B USB-wireless support" + depends on USB && IEEE80211 && IEEE80211_SOFTMAC && NET_RADIO && EXPERIMENTAL + select FW_LOADER + ---help--- + This is an experimental driver for the ZyDAS ZD1211/ZD1211B wireless + chip, present in many USB-wireless adapters. + + Device firmware is required alongside this driver. You can download the + firmware distribution from http://zd1211.ath.cx/get-firmware + +config ZD1211RW_DEBUG + bool "ZyDAS ZD1211 debugging" + depends on ZD1211RW + ---help--- + ZD1211 debugging messages. Choosing Y will result in additional debug + messages being saved to your kernel logs, which may help debug any + problems. + diff --git a/drivers/net/wireless/zd1211rw/Makefile b/drivers/net/wireless/zd1211rw/Makefile new file mode 100644 index 00000000000..500314fc74d --- /dev/null +++ b/drivers/net/wireless/zd1211rw/Makefile @@ -0,0 +1,11 @@ +obj-$(CONFIG_ZD1211RW) += zd1211rw.o + +zd1211rw-objs := zd_chip.o zd_ieee80211.o \ + zd_mac.o zd_netdev.o \ + zd_rf_al2230.o zd_rf_rf2959.o \ + zd_rf.o zd_usb.o zd_util.o + +ifeq ($(CONFIG_ZD1211RW_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif + diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c new file mode 100644 index 00000000000..efc9c4bd826 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -0,0 +1,1615 @@ +/* zd_chip.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* This file implements all the hardware specific functions for the ZD1211 + * and ZD1211B chips. Support for the ZD1211B was possible after Timothy + * Legge sent me a ZD1211B device. Thank you Tim. -- Uli + */ + +#include <linux/kernel.h> +#include <linux/errno.h> + +#include "zd_def.h" +#include "zd_chip.h" +#include "zd_ieee80211.h" +#include "zd_mac.h" +#include "zd_rf.h" +#include "zd_util.h" + +void zd_chip_init(struct zd_chip *chip, + struct net_device *netdev, + struct usb_interface *intf) +{ + memset(chip, 0, sizeof(*chip)); + mutex_init(&chip->mutex); + zd_usb_init(&chip->usb, netdev, intf); + zd_rf_init(&chip->rf); +} + +void zd_chip_clear(struct zd_chip *chip) +{ + mutex_lock(&chip->mutex); + zd_usb_clear(&chip->usb); + zd_rf_clear(&chip->rf); + mutex_unlock(&chip->mutex); + mutex_destroy(&chip->mutex); + memset(chip, 0, sizeof(*chip)); +} + +static int scnprint_mac_oui(const u8 *addr, char *buffer, size_t size) +{ + return scnprintf(buffer, size, "%02x-%02x-%02x", + addr[0], addr[1], addr[2]); +} + +/* Prints an identifier line, which will support debugging. */ +static int scnprint_id(struct zd_chip *chip, char *buffer, size_t size) +{ + int i = 0; + + i = scnprintf(buffer, size, "zd1211%s chip ", + chip->is_zd1211b ? "b" : ""); + i += zd_usb_scnprint_id(&chip->usb, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " "); + i += scnprint_mac_oui(chip->e2p_mac, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " "); + i += zd_rf_scnprint_id(&chip->rf, buffer+i, size-i); + i += scnprintf(buffer+i, size-i, " pa%1x %c%c%c", chip->pa_type, + chip->patch_cck_gain ? 'g' : '-', + chip->patch_cr157 ? '7' : '-', + chip->patch_6m_band_edge ? '6' : '-'); + return i; +} + +static void print_id(struct zd_chip *chip) +{ + char buffer[80]; + + scnprint_id(chip, buffer, sizeof(buffer)); + buffer[sizeof(buffer)-1] = 0; + dev_info(zd_chip_dev(chip), "%s\n", buffer); +} + +/* Read a variable number of 32-bit values. Parameter count is not allowed to + * exceed USB_MAX_IOREAD32_COUNT. + */ +int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr, + unsigned int count) +{ + int r; + int i; + zd_addr_t *a16 = (zd_addr_t *)NULL; + u16 *v16; + unsigned int count16; + + if (count > USB_MAX_IOREAD32_COUNT) + return -EINVAL; + + /* Allocate a single memory block for values and addresses. */ + count16 = 2*count; + a16 = (zd_addr_t *)kmalloc(count16 * (sizeof(zd_addr_t) + sizeof(u16)), + GFP_NOFS); + if (!a16) { + dev_dbg_f(zd_chip_dev(chip), + "error ENOMEM in allocation of a16\n"); + r = -ENOMEM; + goto out; + } + v16 = (u16 *)(a16 + count16); + + for (i = 0; i < count; i++) { + int j = 2*i; + /* We read the high word always first. */ + a16[j] = zd_inc_word(addr[i]); + a16[j+1] = addr[i]; + } + + r = zd_ioread16v_locked(chip, v16, a16, count16); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error: zd_ioread16v_locked. Error number %d\n", r); + goto out; + } + + for (i = 0; i < count; i++) { + int j = 2*i; + values[i] = (v16[j] << 16) | v16[j+1]; + } + +out: + kfree((void *)a16); + return r; +} + +int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count) +{ + int i, j, r; + struct zd_ioreq16 *ioreqs16; + unsigned int count16; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + + if (count == 0) + return 0; + if (count > USB_MAX_IOWRITE32_COUNT) + return -EINVAL; + + /* Allocate a single memory block for values and addresses. */ + count16 = 2*count; + ioreqs16 = kmalloc(count16 * sizeof(struct zd_ioreq16), GFP_NOFS); + if (!ioreqs16) { + r = -ENOMEM; + dev_dbg_f(zd_chip_dev(chip), + "error %d in ioreqs16 allocation\n", r); + goto out; + } + + for (i = 0; i < count; i++) { + j = 2*i; + /* We write the high word always first. */ + ioreqs16[j].value = ioreqs[i].value >> 16; + ioreqs16[j].addr = zd_inc_word(ioreqs[i].addr); + ioreqs16[j+1].value = ioreqs[i].value; + ioreqs16[j+1].addr = ioreqs[i].addr; + } + + r = zd_usb_iowrite16v(&chip->usb, ioreqs16, count16); +#ifdef DEBUG + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error %d in zd_usb_write16v\n", r); + } +#endif /* DEBUG */ +out: + kfree(ioreqs16); + return r; +} + +int zd_iowrite16a_locked(struct zd_chip *chip, + const struct zd_ioreq16 *ioreqs, unsigned int count) +{ + int r; + unsigned int i, j, t, max; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + for (i = 0; i < count; i += j + t) { + t = 0; + max = count-i; + if (max > USB_MAX_IOWRITE16_COUNT) + max = USB_MAX_IOWRITE16_COUNT; + for (j = 0; j < max; j++) { + if (!ioreqs[i+j].addr) { + t = 1; + break; + } + } + + r = zd_usb_iowrite16v(&chip->usb, &ioreqs[i], j); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error zd_usb_iowrite16v. Error number %d\n", + r); + return r; + } + } + + return 0; +} + +/* Writes a variable number of 32 bit registers. The functions will split + * that in several USB requests. A split can be forced by inserting an IO + * request with an zero address field. + */ +int zd_iowrite32a_locked(struct zd_chip *chip, + const struct zd_ioreq32 *ioreqs, unsigned int count) +{ + int r; + unsigned int i, j, t, max; + + for (i = 0; i < count; i += j + t) { + t = 0; + max = count-i; + if (max > USB_MAX_IOWRITE32_COUNT) + max = USB_MAX_IOWRITE32_COUNT; + for (j = 0; j < max; j++) { + if (!ioreqs[i+j].addr) { + t = 1; + break; + } + } + + r = _zd_iowrite32v_locked(chip, &ioreqs[i], j); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error _zd_iowrite32v_locked." + " Error number %d\n", r); + return r; + } + } + + return 0; +} + +int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_ioread16_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_ioread32_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_iowrite16_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, value, addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses, + u32 *values, unsigned int count) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_ioread32v_locked(chip, values, addresses, count); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count) +{ + int r; + + ZD_ASSERT(!mutex_is_locked(&chip->mutex)); + mutex_lock(&chip->mutex); + r = zd_iowrite32a_locked(chip, ioreqs, count); + mutex_unlock(&chip->mutex); + return r; +} + +static int read_pod(struct zd_chip *chip, u8 *rf_type) +{ + int r; + u32 value; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &value, E2P_POD); + if (r) + goto error; + dev_dbg_f(zd_chip_dev(chip), "E2P_POD %#010x\n", value); + + /* FIXME: AL2230 handling (Bit 7 in POD) */ + *rf_type = value & 0x0f; + chip->pa_type = (value >> 16) & 0x0f; + chip->patch_cck_gain = (value >> 8) & 0x1; + chip->patch_cr157 = (value >> 13) & 0x1; + chip->patch_6m_band_edge = (value >> 21) & 0x1; + + dev_dbg_f(zd_chip_dev(chip), + "RF %s %#01x PA type %#01x patch CCK %d patch CR157 %d " + "patch 6M %d\n", + zd_rf_name(*rf_type), *rf_type, + chip->pa_type, chip->patch_cck_gain, + chip->patch_cr157, chip->patch_6m_band_edge); + return 0; +error: + *rf_type = 0; + chip->pa_type = 0; + chip->patch_cck_gain = 0; + chip->patch_cr157 = 0; + chip->patch_6m_band_edge = 0; + return r; +} + +static int _read_mac_addr(struct zd_chip *chip, u8 *mac_addr, + const zd_addr_t *addr) +{ + int r; + u32 parts[2]; + + r = zd_ioread32v_locked(chip, parts, (const zd_addr_t *)addr, 2); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error: couldn't read e2p macs. Error number %d\n", r); + return r; + } + + mac_addr[0] = parts[0]; + mac_addr[1] = parts[0] >> 8; + mac_addr[2] = parts[0] >> 16; + mac_addr[3] = parts[0] >> 24; + mac_addr[4] = parts[1]; + mac_addr[5] = parts[1] >> 8; + + return 0; +} + +static int read_e2p_mac_addr(struct zd_chip *chip) +{ + static const zd_addr_t addr[2] = { E2P_MAC_ADDR_P1, E2P_MAC_ADDR_P2 }; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return _read_mac_addr(chip, chip->e2p_mac, (const zd_addr_t *)addr); +} + +/* MAC address: if custom mac addresses are to to be used CR_MAC_ADDR_P1 and + * CR_MAC_ADDR_P2 must be overwritten + */ +void zd_get_e2p_mac_addr(struct zd_chip *chip, u8 *mac_addr) +{ + mutex_lock(&chip->mutex); + memcpy(mac_addr, chip->e2p_mac, ETH_ALEN); + mutex_unlock(&chip->mutex); +} + +static int read_mac_addr(struct zd_chip *chip, u8 *mac_addr) +{ + static const zd_addr_t addr[2] = { CR_MAC_ADDR_P1, CR_MAC_ADDR_P2 }; + return _read_mac_addr(chip, mac_addr, (const zd_addr_t *)addr); +} + +int zd_read_mac_addr(struct zd_chip *chip, u8 *mac_addr) +{ + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + mutex_lock(&chip->mutex); + r = read_mac_addr(chip, mac_addr); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr) +{ + int r; + struct zd_ioreq32 reqs[2] = { + [0] = { .addr = CR_MAC_ADDR_P1 }, + [1] = { .addr = CR_MAC_ADDR_P2 }, + }; + + reqs[0].value = (mac_addr[3] << 24) + | (mac_addr[2] << 16) + | (mac_addr[1] << 8) + | mac_addr[0]; + reqs[1].value = (mac_addr[5] << 8) + | mac_addr[4]; + + dev_dbg_f(zd_chip_dev(chip), + "mac addr " MAC_FMT "\n", MAC_ARG(mac_addr)); + + mutex_lock(&chip->mutex); + r = zd_iowrite32a_locked(chip, reqs, ARRAY_SIZE(reqs)); +#ifdef DEBUG + { + u8 tmp[ETH_ALEN]; + read_mac_addr(chip, tmp); + } +#endif /* DEBUG */ + mutex_unlock(&chip->mutex); + return r; +} + +int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain) +{ + int r; + u32 value; + + mutex_lock(&chip->mutex); + r = zd_ioread32_locked(chip, &value, E2P_SUBID); + mutex_unlock(&chip->mutex); + if (r) + return r; + + *regdomain = value >> 16; + dev_dbg_f(zd_chip_dev(chip), "regdomain: %#04x\n", *regdomain); + + return 0; +} + +static int read_values(struct zd_chip *chip, u8 *values, size_t count, + zd_addr_t e2p_addr, u32 guard) +{ + int r; + int i; + u32 v; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + for (i = 0;;) { + r = zd_ioread32_locked(chip, &v, e2p_addr+i/2); + if (r) + return r; + v -= guard; + if (i+4 < count) { + values[i++] = v; + values[i++] = v >> 8; + values[i++] = v >> 16; + values[i++] = v >> 24; + continue; + } + for (;i < count; i++) + values[i] = v >> (8*(i%3)); + return 0; + } +} + +static int read_pwr_cal_values(struct zd_chip *chip) +{ + return read_values(chip, chip->pwr_cal_values, + E2P_CHANNEL_COUNT, E2P_PWR_CAL_VALUE1, + 0); +} + +static int read_pwr_int_values(struct zd_chip *chip) +{ + return read_values(chip, chip->pwr_int_values, + E2P_CHANNEL_COUNT, E2P_PWR_INT_VALUE1, + E2P_PWR_INT_GUARD); +} + +static int read_ofdm_cal_values(struct zd_chip *chip) +{ + int r; + int i; + static const zd_addr_t addresses[] = { + E2P_36M_CAL_VALUE1, + E2P_48M_CAL_VALUE1, + E2P_54M_CAL_VALUE1, + }; + + for (i = 0; i < 3; i++) { + r = read_values(chip, chip->ofdm_cal_values[i], + E2P_CHANNEL_COUNT, addresses[i], 0); + if (r) + return r; + } + return 0; +} + +static int read_cal_int_tables(struct zd_chip *chip) +{ + int r; + + r = read_pwr_cal_values(chip); + if (r) + return r; + r = read_pwr_int_values(chip); + if (r) + return r; + r = read_ofdm_cal_values(chip); + if (r) + return r; + return 0; +} + +/* phy means physical registers */ +int zd_chip_lock_phy_regs(struct zd_chip *chip) +{ + int r; + u32 tmp; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &tmp, CR_REG1); + if (r) { + dev_err(zd_chip_dev(chip), "error ioread32(CR_REG1): %d\n", r); + return r; + } + + dev_dbg_f(zd_chip_dev(chip), + "CR_REG1: 0x%02x -> 0x%02x\n", tmp, tmp & ~UNLOCK_PHY_REGS); + tmp &= ~UNLOCK_PHY_REGS; + + r = zd_iowrite32_locked(chip, tmp, CR_REG1); + if (r) + dev_err(zd_chip_dev(chip), "error iowrite32(CR_REG1): %d\n", r); + return r; +} + +int zd_chip_unlock_phy_regs(struct zd_chip *chip) +{ + int r; + u32 tmp; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &tmp, CR_REG1); + if (r) { + dev_err(zd_chip_dev(chip), + "error ioread32(CR_REG1): %d\n", r); + return r; + } + + dev_dbg_f(zd_chip_dev(chip), + "CR_REG1: 0x%02x -> 0x%02x\n", tmp, tmp | UNLOCK_PHY_REGS); + tmp |= UNLOCK_PHY_REGS; + + r = zd_iowrite32_locked(chip, tmp, CR_REG1); + if (r) + dev_err(zd_chip_dev(chip), "error iowrite32(CR_REG1): %d\n", r); + return r; +} + +/* CR157 can be optionally patched by the EEPROM */ +static int patch_cr157(struct zd_chip *chip) +{ + int r; + u32 value; + + if (!chip->patch_cr157) + return 0; + + r = zd_ioread32_locked(chip, &value, E2P_PHY_REG); + if (r) + return r; + + dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value >> 8); + return zd_iowrite32_locked(chip, value >> 8, CR157); +} + +/* + * 6M band edge can be optionally overwritten for certain RF's + * Vendor driver says: for FCC regulation, enabled per HWFeature 6M band edge + * bit (for AL2230, AL2230S) + */ +static int patch_6m_band_edge(struct zd_chip *chip, int channel) +{ + struct zd_ioreq16 ioreqs[] = { + { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 }, + { CR47, 0x1e }, + }; + + if (!chip->patch_6m_band_edge || !chip->rf.patch_6m_band_edge) + return 0; + + /* FIXME: Channel 11 is not the edge for all regulatory domains. */ + if (channel == 1 || channel == 11) + ioreqs[0].value = 0x12; + + dev_dbg_f(zd_chip_dev(chip), "patching for channel %d\n", channel); + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211_hw_reset_phy(struct zd_chip *chip) +{ + static const struct zd_ioreq16 ioreqs[] = { + { CR0, 0x0a }, { CR1, 0x06 }, { CR2, 0x26 }, + { CR3, 0x38 }, { CR4, 0x80 }, { CR9, 0xa0 }, + { CR10, 0x81 }, { CR11, 0x00 }, { CR12, 0x7f }, + { CR13, 0x8c }, { CR14, 0x80 }, { CR15, 0x3d }, + { CR16, 0x20 }, { CR17, 0x1e }, { CR18, 0x0a }, + { CR19, 0x48 }, { CR20, 0x0c }, { CR21, 0x0c }, + { CR22, 0x23 }, { CR23, 0x90 }, { CR24, 0x14 }, + { CR25, 0x40 }, { CR26, 0x10 }, { CR27, 0x19 }, + { CR28, 0x7f }, { CR29, 0x80 }, { CR30, 0x4b }, + { CR31, 0x60 }, { CR32, 0x43 }, { CR33, 0x08 }, + { CR34, 0x06 }, { CR35, 0x0a }, { CR36, 0x00 }, + { CR37, 0x00 }, { CR38, 0x38 }, { CR39, 0x0c }, + { CR40, 0x84 }, { CR41, 0x2a }, { CR42, 0x80 }, + { CR43, 0x10 }, { CR44, 0x12 }, { CR46, 0xff }, + { CR47, 0x1E }, { CR48, 0x26 }, { CR49, 0x5b }, + { CR64, 0xd0 }, { CR65, 0x04 }, { CR66, 0x58 }, + { CR67, 0xc9 }, { CR68, 0x88 }, { CR69, 0x41 }, + { CR70, 0x23 }, { CR71, 0x10 }, { CR72, 0xff }, + { CR73, 0x32 }, { CR74, 0x30 }, { CR75, 0x65 }, + { CR76, 0x41 }, { CR77, 0x1b }, { CR78, 0x30 }, + { CR79, 0x68 }, { CR80, 0x64 }, { CR81, 0x64 }, + { CR82, 0x00 }, { CR83, 0x00 }, { CR84, 0x00 }, + { CR85, 0x02 }, { CR86, 0x00 }, { CR87, 0x00 }, + { CR88, 0xff }, { CR89, 0xfc }, { CR90, 0x00 }, + { CR91, 0x00 }, { CR92, 0x00 }, { CR93, 0x08 }, + { CR94, 0x00 }, { CR95, 0x00 }, { CR96, 0xff }, + { CR97, 0xe7 }, { CR98, 0x00 }, { CR99, 0x00 }, + { CR100, 0x00 }, { CR101, 0xae }, { CR102, 0x02 }, + { CR103, 0x00 }, { CR104, 0x03 }, { CR105, 0x65 }, + { CR106, 0x04 }, { CR107, 0x00 }, { CR108, 0x0a }, + { CR109, 0xaa }, { CR110, 0xaa }, { CR111, 0x25 }, + { CR112, 0x25 }, { CR113, 0x00 }, { CR119, 0x1e }, + { CR125, 0x90 }, { CR126, 0x00 }, { CR127, 0x00 }, + { }, + { CR5, 0x00 }, { CR6, 0x00 }, { CR7, 0x00 }, + { CR8, 0x00 }, { CR9, 0x20 }, { CR12, 0xf0 }, + { CR20, 0x0e }, { CR21, 0x0e }, { CR27, 0x10 }, + { CR44, 0x33 }, { CR47, 0x1E }, { CR83, 0x24 }, + { CR84, 0x04 }, { CR85, 0x00 }, { CR86, 0x0C }, + { CR87, 0x12 }, { CR88, 0x0C }, { CR89, 0x00 }, + { CR90, 0x10 }, { CR91, 0x08 }, { CR93, 0x00 }, + { CR94, 0x01 }, { CR95, 0x00 }, { CR96, 0x50 }, + { CR97, 0x37 }, { CR98, 0x35 }, { CR101, 0x13 }, + { CR102, 0x27 }, { CR103, 0x27 }, { CR104, 0x18 }, + { CR105, 0x12 }, { CR109, 0x27 }, { CR110, 0x27 }, + { CR111, 0x27 }, { CR112, 0x27 }, { CR113, 0x27 }, + { CR114, 0x27 }, { CR115, 0x26 }, { CR116, 0x24 }, + { CR117, 0xfc }, { CR118, 0xfa }, { CR120, 0x4f }, + { CR123, 0x27 }, { CR125, 0xaa }, { CR127, 0x03 }, + { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 }, + { CR131, 0x0C }, { CR136, 0xdf }, { CR137, 0x40 }, + { CR138, 0xa0 }, { CR139, 0xb0 }, { CR140, 0x99 }, + { CR141, 0x82 }, { CR142, 0x54 }, { CR143, 0x1c }, + { CR144, 0x6c }, { CR147, 0x07 }, { CR148, 0x4c }, + { CR149, 0x50 }, { CR150, 0x0e }, { CR151, 0x18 }, + { CR160, 0xfe }, { CR161, 0xee }, { CR162, 0xaa }, + { CR163, 0xfa }, { CR164, 0xfa }, { CR165, 0xea }, + { CR166, 0xbe }, { CR167, 0xbe }, { CR168, 0x6a }, + { CR169, 0xba }, { CR170, 0xba }, { CR171, 0xba }, + /* Note: CR204 must lead the CR203 */ + { CR204, 0x7d }, + { }, + { CR203, 0x30 }, + }; + + int r, t; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + goto unlock; + + r = patch_cr157(chip); +unlock: + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + return r; +} + +static int zd1211b_hw_reset_phy(struct zd_chip *chip) +{ + static const struct zd_ioreq16 ioreqs[] = { + { CR0, 0x14 }, { CR1, 0x06 }, { CR2, 0x26 }, + { CR3, 0x38 }, { CR4, 0x80 }, { CR9, 0xe0 }, + { CR10, 0x81 }, + /* power control { { CR11, 1 << 6 }, */ + { CR11, 0x00 }, + { CR12, 0xf0 }, { CR13, 0x8c }, { CR14, 0x80 }, + { CR15, 0x3d }, { CR16, 0x20 }, { CR17, 0x1e }, + { CR18, 0x0a }, { CR19, 0x48 }, + { CR20, 0x10 }, /* Org:0x0E, ComTrend:RalLink AP */ + { CR21, 0x0e }, { CR22, 0x23 }, { CR23, 0x90 }, + { CR24, 0x14 }, { CR25, 0x40 }, { CR26, 0x10 }, + { CR27, 0x10 }, { CR28, 0x7f }, { CR29, 0x80 }, + { CR30, 0x49 }, /* jointly decoder, no ASIC */ + { CR31, 0x60 }, { CR32, 0x43 }, { CR33, 0x08 }, + { CR34, 0x06 }, { CR35, 0x0a }, { CR36, 0x00 }, + { CR37, 0x00 }, { CR38, 0x38 }, { CR39, 0x0c }, + { CR40, 0x84 }, { CR41, 0x2a }, { CR42, 0x80 }, + { CR43, 0x10 }, { CR44, 0x33 }, { CR46, 0xff }, + { CR47, 0x1E }, { CR48, 0x26 }, { CR49, 0x5b }, + { CR64, 0xd0 }, { CR65, 0x04 }, { CR66, 0x58 }, + { CR67, 0xc9 }, { CR68, 0x88 }, { CR69, 0x41 }, + { CR70, 0x23 }, { CR71, 0x10 }, { CR72, 0xff }, + { CR73, 0x32 }, { CR74, 0x30 }, { CR75, 0x65 }, + { CR76, 0x41 }, { CR77, 0x1b }, { CR78, 0x30 }, + { CR79, 0xf0 }, { CR80, 0x64 }, { CR81, 0x64 }, + { CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 }, + { CR85, 0x00 }, { CR86, 0x0c }, { CR87, 0x12 }, + { CR88, 0x0c }, { CR89, 0x00 }, { CR90, 0x58 }, + { CR91, 0x04 }, { CR92, 0x00 }, { CR93, 0x00 }, + { CR94, 0x01 }, + { CR95, 0x20 }, /* ZD1211B */ + { CR96, 0x50 }, { CR97, 0x37 }, { CR98, 0x35 }, + { CR99, 0x00 }, { CR100, 0x01 }, { CR101, 0x13 }, + { CR102, 0x27 }, { CR103, 0x27 }, { CR104, 0x18 }, + { CR105, 0x12 }, { CR106, 0x04 }, { CR107, 0x00 }, + { CR108, 0x0a }, { CR109, 0x27 }, { CR110, 0x27 }, + { CR111, 0x27 }, { CR112, 0x27 }, { CR113, 0x27 }, + { CR114, 0x27 }, { CR115, 0x26 }, { CR116, 0x24 }, + { CR117, 0xfc }, { CR118, 0xfa }, { CR119, 0x1e }, + { CR125, 0x90 }, { CR126, 0x00 }, { CR127, 0x00 }, + { CR128, 0x14 }, { CR129, 0x12 }, { CR130, 0x10 }, + { CR131, 0x0c }, { CR136, 0xdf }, { CR137, 0xa0 }, + { CR138, 0xa8 }, { CR139, 0xb4 }, { CR140, 0x98 }, + { CR141, 0x82 }, { CR142, 0x53 }, { CR143, 0x1c }, + { CR144, 0x6c }, { CR147, 0x07 }, { CR148, 0x40 }, + { CR149, 0x40 }, /* Org:0x50 ComTrend:RalLink AP */ + { CR150, 0x14 }, /* Org:0x0E ComTrend:RalLink AP */ + { CR151, 0x18 }, { CR159, 0x70 }, { CR160, 0xfe }, + { CR161, 0xee }, { CR162, 0xaa }, { CR163, 0xfa }, + { CR164, 0xfa }, { CR165, 0xea }, { CR166, 0xbe }, + { CR167, 0xbe }, { CR168, 0x6a }, { CR169, 0xba }, + { CR170, 0xba }, { CR171, 0xba }, + /* Note: CR204 must lead the CR203 */ + { CR204, 0x7d }, + {}, + { CR203, 0x30 }, + }; + + int r, t; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + goto unlock; + + r = patch_cr157(chip); +unlock: + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + return r; +} + +static int hw_reset_phy(struct zd_chip *chip) +{ + return chip->is_zd1211b ? zd1211b_hw_reset_phy(chip) : + zd1211_hw_reset_phy(chip); +} + +static int zd1211_hw_init_hmac(struct zd_chip *chip) +{ + static const struct zd_ioreq32 ioreqs[] = { + { CR_ACK_TIMEOUT_EXT, 0x20 }, + { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, + { CR_ZD1211_RETRY_MAX, 0x2 }, + { CR_SNIFFER_ON, 0 }, + { CR_RX_FILTER, AP_RX_FILTER }, + { CR_GROUP_HASH_P1, 0x00 }, + { CR_GROUP_HASH_P2, 0x80000000 }, + { CR_REG1, 0xa4 }, + { CR_ADDA_PWR_DWN, 0x7f }, + { CR_BCN_PLCP_CFG, 0x00f00401 }, + { CR_PHY_DELAY, 0x00 }, + { CR_ACK_TIMEOUT_EXT, 0x80 }, + { CR_ADDA_PWR_DWN, 0x00 }, + { CR_ACK_TIME_80211, 0x100 }, + { CR_IFS_VALUE, 0x547c032 }, + { CR_RX_PE_DELAY, 0x70 }, + { CR_PS_CTRL, 0x10000000 }, + { CR_RTS_CTS_RATE, 0x02030203 }, + { CR_RX_THRESHOLD, 0x000c0640 }, + { CR_AFTER_PNP, 0x1 }, + { CR_WEP_PROTECT, 0x114 }, + }; + + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +#ifdef DEBUG + if (r) { + dev_err(zd_chip_dev(chip), + "error in zd_iowrite32a_locked. Error number %d\n", r); + } +#endif /* DEBUG */ + return r; +} + +static int zd1211b_hw_init_hmac(struct zd_chip *chip) +{ + static const struct zd_ioreq32 ioreqs[] = { + { CR_ACK_TIMEOUT_EXT, 0x20 }, + { CR_ADDA_MBIAS_WARMTIME, 0x30000808 }, + { CR_ZD1211B_RETRY_MAX, 0x02020202 }, + { CR_ZD1211B_TX_PWR_CTL4, 0x007f003f }, + { CR_ZD1211B_TX_PWR_CTL3, 0x007f003f }, + { CR_ZD1211B_TX_PWR_CTL2, 0x003f001f }, + { CR_ZD1211B_TX_PWR_CTL1, 0x001f000f }, + { CR_ZD1211B_AIFS_CTL1, 0x00280028 }, + { CR_ZD1211B_AIFS_CTL2, 0x008C003C }, + { CR_ZD1211B_TXOP, 0x01800824 }, + { CR_SNIFFER_ON, 0 }, + { CR_RX_FILTER, AP_RX_FILTER }, + { CR_GROUP_HASH_P1, 0x00 }, + { CR_GROUP_HASH_P2, 0x80000000 }, + { CR_REG1, 0xa4 }, + { CR_ADDA_PWR_DWN, 0x7f }, + { CR_BCN_PLCP_CFG, 0x00f00401 }, + { CR_PHY_DELAY, 0x00 }, + { CR_ACK_TIMEOUT_EXT, 0x80 }, + { CR_ADDA_PWR_DWN, 0x00 }, + { CR_ACK_TIME_80211, 0x100 }, + { CR_IFS_VALUE, 0x547c032 }, + { CR_RX_PE_DELAY, 0x70 }, + { CR_PS_CTRL, 0x10000000 }, + { CR_RTS_CTS_RATE, 0x02030203 }, + { CR_RX_THRESHOLD, 0x000c0640 }, + { CR_AFTER_PNP, 0x1 }, + { CR_WEP_PROTECT, 0x114 }, + }; + + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error in zd_iowrite32a_locked. Error number %d\n", r); + } + return r; +} + +static int hw_init_hmac(struct zd_chip *chip) +{ + return chip->is_zd1211b ? + zd1211b_hw_init_hmac(chip) : zd1211_hw_init_hmac(chip); +} + +struct aw_pt_bi { + u32 atim_wnd_period; + u32 pre_tbtt; + u32 beacon_interval; +}; + +static int get_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s) +{ + int r; + static const zd_addr_t aw_pt_bi_addr[] = + { CR_ATIM_WND_PERIOD, CR_PRE_TBTT, CR_BCN_INTERVAL }; + u32 values[3]; + + r = zd_ioread32v_locked(chip, values, (const zd_addr_t *)aw_pt_bi_addr, + ARRAY_SIZE(aw_pt_bi_addr)); + if (r) { + memset(s, 0, sizeof(*s)); + return r; + } + + s->atim_wnd_period = values[0]; + s->pre_tbtt = values[1]; + s->beacon_interval = values[2]; + dev_dbg_f(zd_chip_dev(chip), "aw %u pt %u bi %u\n", + s->atim_wnd_period, s->pre_tbtt, s->beacon_interval); + return 0; +} + +static int set_aw_pt_bi(struct zd_chip *chip, struct aw_pt_bi *s) +{ + struct zd_ioreq32 reqs[3]; + + if (s->beacon_interval <= 5) + s->beacon_interval = 5; + if (s->pre_tbtt < 4 || s->pre_tbtt >= s->beacon_interval) + s->pre_tbtt = s->beacon_interval - 1; + if (s->atim_wnd_period >= s->pre_tbtt) + s->atim_wnd_period = s->pre_tbtt - 1; + + reqs[0].addr = CR_ATIM_WND_PERIOD; + reqs[0].value = s->atim_wnd_period; + reqs[1].addr = CR_PRE_TBTT; + reqs[1].value = s->pre_tbtt; + reqs[2].addr = CR_BCN_INTERVAL; + reqs[2].value = s->beacon_interval; + + dev_dbg_f(zd_chip_dev(chip), + "aw %u pt %u bi %u\n", s->atim_wnd_period, s->pre_tbtt, + s->beacon_interval); + return zd_iowrite32a_locked(chip, reqs, ARRAY_SIZE(reqs)); +} + + +static int set_beacon_interval(struct zd_chip *chip, u32 interval) +{ + int r; + struct aw_pt_bi s; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = get_aw_pt_bi(chip, &s); + if (r) + return r; + s.beacon_interval = interval; + return set_aw_pt_bi(chip, &s); +} + +int zd_set_beacon_interval(struct zd_chip *chip, u32 interval) +{ + int r; + + mutex_lock(&chip->mutex); + r = set_beacon_interval(chip, interval); + mutex_unlock(&chip->mutex); + return r; +} + +static int hw_init(struct zd_chip *chip) +{ + int r; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = hw_reset_phy(chip); + if (r) + return r; + + r = hw_init_hmac(chip); + if (r) + return r; + r = set_beacon_interval(chip, 100); + if (r) + return r; + return 0; +} + +#ifdef DEBUG +static int dump_cr(struct zd_chip *chip, const zd_addr_t addr, + const char *addr_string) +{ + int r; + u32 value; + + r = zd_ioread32_locked(chip, &value, addr); + if (r) { + dev_dbg_f(zd_chip_dev(chip), + "error reading %s. Error number %d\n", addr_string, r); + return r; + } + + dev_dbg_f(zd_chip_dev(chip), "%s %#010x\n", + addr_string, (unsigned int)value); + return 0; +} + +static int test_init(struct zd_chip *chip) +{ + int r; + + r = dump_cr(chip, CR_AFTER_PNP, "CR_AFTER_PNP"); + if (r) + return r; + r = dump_cr(chip, CR_GPI_EN, "CR_GPI_EN"); + if (r) + return r; + return dump_cr(chip, CR_INTERRUPT, "CR_INTERRUPT"); +} + +static void dump_fw_registers(struct zd_chip *chip) +{ + static const zd_addr_t addr[4] = { + FW_FIRMWARE_VER, FW_USB_SPEED, FW_FIX_TX_RATE, + FW_LINK_STATUS + }; + + int r; + u16 values[4]; + + r = zd_ioread16v_locked(chip, values, (const zd_addr_t*)addr, + ARRAY_SIZE(addr)); + if (r) { + dev_dbg_f(zd_chip_dev(chip), "error %d zd_ioread16v_locked\n", + r); + return; + } + + dev_dbg_f(zd_chip_dev(chip), "FW_FIRMWARE_VER %#06hx\n", values[0]); + dev_dbg_f(zd_chip_dev(chip), "FW_USB_SPEED %#06hx\n", values[1]); + dev_dbg_f(zd_chip_dev(chip), "FW_FIX_TX_RATE %#06hx\n", values[2]); + dev_dbg_f(zd_chip_dev(chip), "FW_LINK_STATUS %#06hx\n", values[3]); +} +#endif /* DEBUG */ + +static int print_fw_version(struct zd_chip *chip) +{ + int r; + u16 version; + + r = zd_ioread16_locked(chip, &version, FW_FIRMWARE_VER); + if (r) + return r; + + dev_info(zd_chip_dev(chip),"firmware version %04hx\n", version); + return 0; +} + +static int set_mandatory_rates(struct zd_chip *chip, enum ieee80211_std std) +{ + u32 rates; + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + /* This sets the mandatory rates, which only depend from the standard + * that the device is supporting. Until further notice we should try + * to support 802.11g also for full speed USB. + */ + switch (std) { + case IEEE80211B: + rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M; + break; + case IEEE80211G: + rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M| + CR_RATE_6M|CR_RATE_12M|CR_RATE_24M; + break; + default: + return -EINVAL; + } + return zd_iowrite32_locked(chip, rates, CR_MANDATORY_RATE_TBL); +} + +int zd_chip_enable_hwint(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, HWINT_ENABLED, CR_INTERRUPT); + mutex_unlock(&chip->mutex); + return r; +} + +static int disable_hwint(struct zd_chip *chip) +{ + return zd_iowrite32_locked(chip, HWINT_DISABLED, CR_INTERRUPT); +} + +int zd_chip_disable_hwint(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = disable_hwint(chip); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_init_hw(struct zd_chip *chip, u8 device_type) +{ + int r; + u8 rf_type; + + dev_dbg_f(zd_chip_dev(chip), "\n"); + + mutex_lock(&chip->mutex); + chip->is_zd1211b = (device_type == DEVICE_ZD1211B) != 0; + +#ifdef DEBUG + r = test_init(chip); + if (r) + goto out; +#endif + r = zd_iowrite32_locked(chip, 1, CR_AFTER_PNP); + if (r) + goto out; + + r = zd_usb_init_hw(&chip->usb); + if (r) + goto out; + + /* GPI is always disabled, also in the other driver. + */ + r = zd_iowrite32_locked(chip, 0, CR_GPI_EN); + if (r) + goto out; + r = zd_iowrite32_locked(chip, CWIN_SIZE, CR_CWMIN_CWMAX); + if (r) + goto out; + /* Currently we support IEEE 802.11g for full and high speed USB. + * It might be discussed, whether we should suppport pure b mode for + * full speed USB. + */ + r = set_mandatory_rates(chip, IEEE80211G); + if (r) + goto out; + /* Disabling interrupts is certainly a smart thing here. + */ + r = disable_hwint(chip); + if (r) + goto out; + r = read_pod(chip, &rf_type); + if (r) + goto out; + r = hw_init(chip); + if (r) + goto out; + r = zd_rf_init_hw(&chip->rf, rf_type); + if (r) + goto out; + + r = print_fw_version(chip); + if (r) + goto out; + +#ifdef DEBUG + dump_fw_registers(chip); + r = test_init(chip); + if (r) + goto out; +#endif /* DEBUG */ + + r = read_e2p_mac_addr(chip); + if (r) + goto out; + + r = read_cal_int_tables(chip); + if (r) + goto out; + + print_id(chip); +out: + mutex_unlock(&chip->mutex); + return r; +} + +static int update_pwr_int(struct zd_chip *chip, u8 channel) +{ + u8 value = chip->pwr_int_values[channel - 1]; + dev_dbg_f(zd_chip_dev(chip), "channel %d pwr_int %#04x\n", + channel, value); + return zd_iowrite32_locked(chip, value, CR31); +} + +static int update_pwr_cal(struct zd_chip *chip, u8 channel) +{ + u8 value = chip->pwr_cal_values[channel-1]; + dev_dbg_f(zd_chip_dev(chip), "channel %d pwr_cal %#04x\n", + channel, value); + return zd_iowrite32_locked(chip, value, CR68); +} + +static int update_ofdm_cal(struct zd_chip *chip, u8 channel) +{ + struct zd_ioreq32 ioreqs[3]; + + ioreqs[0].addr = CR67; + ioreqs[0].value = chip->ofdm_cal_values[OFDM_36M_INDEX][channel-1]; + ioreqs[1].addr = CR66; + ioreqs[1].value = chip->ofdm_cal_values[OFDM_48M_INDEX][channel-1]; + ioreqs[2].addr = CR65; + ioreqs[2].value = chip->ofdm_cal_values[OFDM_54M_INDEX][channel-1]; + + dev_dbg_f(zd_chip_dev(chip), + "channel %d ofdm_cal 36M %#04x 48M %#04x 54M %#04x\n", + channel, ioreqs[0].value, ioreqs[1].value, ioreqs[2].value); + return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int update_channel_integration_and_calibration(struct zd_chip *chip, + u8 channel) +{ + int r; + + r = update_pwr_int(chip, channel); + if (r) + return r; + if (chip->is_zd1211b) { + static const struct zd_ioreq32 ioreqs[] = { + { CR69, 0x28 }, + {}, + { CR69, 0x2a }, + }; + + r = update_ofdm_cal(chip, channel); + if (r) + return r; + r = update_pwr_cal(chip, channel); + if (r) + return r; + r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + } + + return 0; +} + +/* The CCK baseband gain can be optionally patched by the EEPROM */ +static int patch_cck_gain(struct zd_chip *chip) +{ + int r; + u32 value; + + if (!chip->patch_cck_gain) + return 0; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread32_locked(chip, &value, E2P_PHY_REG); + if (r) + return r; + dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value & 0xff); + return zd_iowrite32_locked(chip, value & 0xff, CR47); +} + +int zd_chip_set_channel(struct zd_chip *chip, u8 channel) +{ + int r, t; + + mutex_lock(&chip->mutex); + r = zd_chip_lock_phy_regs(chip); + if (r) + goto out; + r = zd_rf_set_channel(&chip->rf, channel); + if (r) + goto unlock; + r = update_channel_integration_and_calibration(chip, channel); + if (r) + goto unlock; + r = patch_cck_gain(chip); + if (r) + goto unlock; + r = patch_6m_band_edge(chip, channel); + if (r) + goto unlock; + r = zd_iowrite32_locked(chip, 0, CR_CONFIG_PHILIPS); +unlock: + t = zd_chip_unlock_phy_regs(chip); + if (t && !r) + r = t; +out: + mutex_unlock(&chip->mutex); + return r; +} + +u8 zd_chip_get_channel(struct zd_chip *chip) +{ + u8 channel; + + mutex_lock(&chip->mutex); + channel = chip->rf.channel; + mutex_unlock(&chip->mutex); + return channel; +} + +static u16 led_mask(int led) +{ + switch (led) { + case 1: + return LED1; + case 2: + return LED2; + default: + return 0; + } +} + +static int read_led_reg(struct zd_chip *chip, u16 *status) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_ioread16_locked(chip, status, CR_LED); +} + +static int write_led_reg(struct zd_chip *chip, u16 status) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_iowrite16_locked(chip, status, CR_LED); +} + +int zd_chip_led_status(struct zd_chip *chip, int led, enum led_status status) +{ + int r, ret; + u16 mask = led_mask(led); + u16 reg; + + if (!mask) + return -EINVAL; + mutex_lock(&chip->mutex); + r = read_led_reg(chip, ®); + if (r) + return r; + switch (status) { + case LED_STATUS: + return (reg & mask) ? LED_ON : LED_OFF; + case LED_OFF: + reg &= ~mask; + ret = LED_OFF; + break; + case LED_FLIP: + reg ^= mask; + ret = (reg&mask) ? LED_ON : LED_OFF; + break; + case LED_ON: + reg |= mask; + ret = LED_ON; + break; + default: + return -EINVAL; + } + r = write_led_reg(chip, reg); + if (r) { + ret = r; + goto out; + } +out: + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_led_flip(struct zd_chip *chip, int led, + const unsigned int *phases_msecs, unsigned int count) +{ + int i, r; + enum led_status status; + + r = zd_chip_led_status(chip, led, LED_STATUS); + if (r) + return r; + status = r; + for (i = 0; i < count; i++) { + r = zd_chip_led_status(chip, led, LED_FLIP); + if (r < 0) + goto out; + msleep(phases_msecs[i]); + } + +out: + zd_chip_led_status(chip, led, status); + return r; +} + +int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates) +{ + int r; + + if (cr_rates & ~(CR_RATES_80211B|CR_RATES_80211G)) + return -EINVAL; + + mutex_lock(&chip->mutex); + r = zd_iowrite32_locked(chip, cr_rates, CR_BASIC_RATE_TBL); + mutex_unlock(&chip->mutex); + return r; +} + +static int ofdm_qual_db(u8 status_quality, u8 rate, unsigned int size) +{ + static const u16 constants[] = { + 715, 655, 585, 540, 470, 410, 360, 315, + 270, 235, 205, 175, 150, 125, 105, 85, + 65, 50, 40, 25, 15 + }; + + int i; + u32 x; + + /* It seems that their quality parameter is somehow per signal + * and is now transferred per bit. + */ + switch (rate) { + case ZD_OFDM_RATE_6M: + case ZD_OFDM_RATE_12M: + case ZD_OFDM_RATE_24M: + size *= 2; + break; + case ZD_OFDM_RATE_9M: + case ZD_OFDM_RATE_18M: + case ZD_OFDM_RATE_36M: + case ZD_OFDM_RATE_54M: + size *= 4; + size /= 3; + break; + case ZD_OFDM_RATE_48M: + size *= 3; + size /= 2; + break; + default: + return -EINVAL; + } + + x = (10000 * status_quality)/size; + for (i = 0; i < ARRAY_SIZE(constants); i++) { + if (x > constants[i]) + break; + } + + return i; +} + +static unsigned int log10times100(unsigned int x) +{ + static const u8 log10[] = { + 0, + 0, 30, 47, 60, 69, 77, 84, 90, 95, 100, + 104, 107, 111, 114, 117, 120, 123, 125, 127, 130, + 132, 134, 136, 138, 139, 141, 143, 144, 146, 147, + 149, 150, 151, 153, 154, 155, 156, 157, 159, 160, + 161, 162, 163, 164, 165, 166, 167, 168, 169, 169, + 170, 171, 172, 173, 174, 174, 175, 176, 177, 177, + 178, 179, 179, 180, 181, 181, 182, 183, 183, 184, + 185, 185, 186, 186, 187, 188, 188, 189, 189, 190, + 190, 191, 191, 192, 192, 193, 193, 194, 194, 195, + 195, 196, 196, 197, 197, 198, 198, 199, 199, 200, + 200, 200, 201, 201, 202, 202, 202, 203, 203, 204, + 204, 204, 205, 205, 206, 206, 206, 207, 207, 207, + 208, 208, 208, 209, 209, 210, 210, 210, 211, 211, + 211, 212, 212, 212, 213, 213, 213, 213, 214, 214, + 214, 215, 215, 215, 216, 216, 216, 217, 217, 217, + 217, 218, 218, 218, 219, 219, 219, 219, 220, 220, + 220, 220, 221, 221, 221, 222, 222, 222, 222, 223, + 223, 223, 223, 224, 224, 224, 224, + }; + + return x < ARRAY_SIZE(log10) ? log10[x] : 225; +} + +enum { + MAX_CCK_EVM_DB = 45, +}; + +static int cck_evm_db(u8 status_quality) +{ + return (20 * log10times100(status_quality)) / 100; +} + +static int cck_snr_db(u8 status_quality) +{ + int r = MAX_CCK_EVM_DB - cck_evm_db(status_quality); + ZD_ASSERT(r >= 0); + return r; +} + +static int rx_qual_db(const void *rx_frame, unsigned int size, + const struct rx_status *status) +{ + return (status->frame_status&ZD_RX_OFDM) ? + ofdm_qual_db(status->signal_quality_ofdm, + zd_ofdm_plcp_header_rate(rx_frame), + size) : + cck_snr_db(status->signal_quality_cck); +} + +u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, + const struct rx_status *status) +{ + int r = rx_qual_db(rx_frame, size, status); + if (r < 0) + r = 0; + r = (r * 100) / 14; + if (r > 100) + r = 100; + return r; +} + +u8 zd_rx_strength_percent(u8 rssi) +{ + int r = (rssi*100) / 30; + if (r > 100) + r = 100; + return (u8) r; +} + +u16 zd_rx_rate(const void *rx_frame, const struct rx_status *status) +{ + static const u16 ofdm_rates[] = { + [ZD_OFDM_RATE_6M] = 60, + [ZD_OFDM_RATE_9M] = 90, + [ZD_OFDM_RATE_12M] = 120, + [ZD_OFDM_RATE_18M] = 180, + [ZD_OFDM_RATE_24M] = 240, + [ZD_OFDM_RATE_36M] = 360, + [ZD_OFDM_RATE_48M] = 480, + [ZD_OFDM_RATE_54M] = 540, + }; + u16 rate; + if (status->frame_status & ZD_RX_OFDM) { + u8 ofdm_rate = zd_ofdm_plcp_header_rate(rx_frame); + rate = ofdm_rates[ofdm_rate & 0xf]; + } else { + u8 cck_rate = zd_cck_plcp_header_rate(rx_frame); + switch (cck_rate) { + case ZD_CCK_SIGNAL_1M: + rate = 10; + break; + case ZD_CCK_SIGNAL_2M: + rate = 20; + break; + case ZD_CCK_SIGNAL_5M5: + rate = 55; + break; + case ZD_CCK_SIGNAL_11M: + rate = 110; + break; + default: + rate = 0; + } + } + + return rate; +} + +int zd_chip_switch_radio_on(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_switch_radio_on(&chip->rf); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_switch_radio_off(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_switch_radio_off(&chip->rf); + mutex_unlock(&chip->mutex); + return r; +} + +int zd_chip_enable_int(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_usb_enable_int(&chip->usb); + mutex_unlock(&chip->mutex); + return r; +} + +void zd_chip_disable_int(struct zd_chip *chip) +{ + mutex_lock(&chip->mutex); + zd_usb_disable_int(&chip->usb); + mutex_unlock(&chip->mutex); +} + +int zd_chip_enable_rx(struct zd_chip *chip) +{ + int r; + + mutex_lock(&chip->mutex); + r = zd_usb_enable_rx(&chip->usb); + mutex_unlock(&chip->mutex); + return r; +} + +void zd_chip_disable_rx(struct zd_chip *chip) +{ + mutex_lock(&chip->mutex); + zd_usb_disable_rx(&chip->usb); + mutex_unlock(&chip->mutex); +} + +int zd_rfwritev_locked(struct zd_chip *chip, + const u32* values, unsigned int count, u8 bits) +{ + int r; + unsigned int i; + + for (i = 0; i < count; i++) { + r = zd_rfwrite_locked(chip, values[i], bits); + if (r) + return r; + } + + return 0; +} diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h new file mode 100644 index 00000000000..805121093ab --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -0,0 +1,825 @@ +/* zd_chip.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_CHIP_H +#define _ZD_CHIP_H + +#include "zd_types.h" +#include "zd_rf.h" +#include "zd_usb.h" + +/* Header for the Media Access Controller (MAC) and the Baseband Processor + * (BBP). It appears that the ZD1211 wraps the old ZD1205 with USB glue and + * adds a processor for handling the USB protocol. + */ + +/* 8-bit hardware registers */ +#define CR0 CTL_REG(0x0000) +#define CR1 CTL_REG(0x0004) +#define CR2 CTL_REG(0x0008) +#define CR3 CTL_REG(0x000C) + +#define CR5 CTL_REG(0x0010) +/* bit 5: if set short preamble used + * bit 6: filter band - Japan channel 14 on, else off + */ +#define CR6 CTL_REG(0x0014) +#define CR7 CTL_REG(0x0018) +#define CR8 CTL_REG(0x001C) + +#define CR4 CTL_REG(0x0020) + +#define CR9 CTL_REG(0x0024) +/* bit 2: antenna switch (together with CR10) */ +#define CR10 CTL_REG(0x0028) +/* bit 1: antenna switch (together with CR9) + * RF2959 controls with CR11 radion on and off + */ +#define CR11 CTL_REG(0x002C) +/* bit 6: TX power control for OFDM + * RF2959 controls with CR10 radio on and off + */ +#define CR12 CTL_REG(0x0030) +#define CR13 CTL_REG(0x0034) +#define CR14 CTL_REG(0x0038) +#define CR15 CTL_REG(0x003C) +#define CR16 CTL_REG(0x0040) +#define CR17 CTL_REG(0x0044) +#define CR18 CTL_REG(0x0048) +#define CR19 CTL_REG(0x004C) +#define CR20 CTL_REG(0x0050) +#define CR21 CTL_REG(0x0054) +#define CR22 CTL_REG(0x0058) +#define CR23 CTL_REG(0x005C) +#define CR24 CTL_REG(0x0060) /* CCA threshold */ +#define CR25 CTL_REG(0x0064) +#define CR26 CTL_REG(0x0068) +#define CR27 CTL_REG(0x006C) +#define CR28 CTL_REG(0x0070) +#define CR29 CTL_REG(0x0074) +#define CR30 CTL_REG(0x0078) +#define CR31 CTL_REG(0x007C) /* TX power control for RF in CCK mode */ +#define CR32 CTL_REG(0x0080) +#define CR33 CTL_REG(0x0084) +#define CR34 CTL_REG(0x0088) +#define CR35 CTL_REG(0x008C) +#define CR36 CTL_REG(0x0090) +#define CR37 CTL_REG(0x0094) +#define CR38 CTL_REG(0x0098) +#define CR39 CTL_REG(0x009C) +#define CR40 CTL_REG(0x00A0) +#define CR41 CTL_REG(0x00A4) +#define CR42 CTL_REG(0x00A8) +#define CR43 CTL_REG(0x00AC) +#define CR44 CTL_REG(0x00B0) +#define CR45 CTL_REG(0x00B4) +#define CR46 CTL_REG(0x00B8) +#define CR47 CTL_REG(0x00BC) /* CCK baseband gain + * (patch value might be in EEPROM) + */ +#define CR48 CTL_REG(0x00C0) +#define CR49 CTL_REG(0x00C4) +#define CR50 CTL_REG(0x00C8) +#define CR51 CTL_REG(0x00CC) /* TX power control for RF in 6-36M modes */ +#define CR52 CTL_REG(0x00D0) /* TX power control for RF in 48M mode */ +#define CR53 CTL_REG(0x00D4) /* TX power control for RF in 54M mode */ +#define CR54 CTL_REG(0x00D8) +#define CR55 CTL_REG(0x00DC) +#define CR56 CTL_REG(0x00E0) +#define CR57 CTL_REG(0x00E4) +#define CR58 CTL_REG(0x00E8) +#define CR59 CTL_REG(0x00EC) +#define CR60 CTL_REG(0x00F0) +#define CR61 CTL_REG(0x00F4) +#define CR62 CTL_REG(0x00F8) +#define CR63 CTL_REG(0x00FC) +#define CR64 CTL_REG(0x0100) +#define CR65 CTL_REG(0x0104) /* OFDM 54M calibration */ +#define CR66 CTL_REG(0x0108) /* OFDM 48M calibration */ +#define CR67 CTL_REG(0x010C) /* OFDM 36M calibration */ +#define CR68 CTL_REG(0x0110) /* CCK calibration */ +#define CR69 CTL_REG(0x0114) +#define CR70 CTL_REG(0x0118) +#define CR71 CTL_REG(0x011C) +#define CR72 CTL_REG(0x0120) +#define CR73 CTL_REG(0x0124) +#define CR74 CTL_REG(0x0128) +#define CR75 CTL_REG(0x012C) +#define CR76 CTL_REG(0x0130) +#define CR77 CTL_REG(0x0134) +#define CR78 CTL_REG(0x0138) +#define CR79 CTL_REG(0x013C) +#define CR80 CTL_REG(0x0140) +#define CR81 CTL_REG(0x0144) +#define CR82 CTL_REG(0x0148) +#define CR83 CTL_REG(0x014C) +#define CR84 CTL_REG(0x0150) +#define CR85 CTL_REG(0x0154) +#define CR86 CTL_REG(0x0158) +#define CR87 CTL_REG(0x015C) +#define CR88 CTL_REG(0x0160) +#define CR89 CTL_REG(0x0164) +#define CR90 CTL_REG(0x0168) +#define CR91 CTL_REG(0x016C) +#define CR92 CTL_REG(0x0170) +#define CR93 CTL_REG(0x0174) +#define CR94 CTL_REG(0x0178) +#define CR95 CTL_REG(0x017C) +#define CR96 CTL_REG(0x0180) +#define CR97 CTL_REG(0x0184) +#define CR98 CTL_REG(0x0188) +#define CR99 CTL_REG(0x018C) +#define CR100 CTL_REG(0x0190) +#define CR101 CTL_REG(0x0194) +#define CR102 CTL_REG(0x0198) +#define CR103 CTL_REG(0x019C) +#define CR104 CTL_REG(0x01A0) +#define CR105 CTL_REG(0x01A4) +#define CR106 CTL_REG(0x01A8) +#define CR107 CTL_REG(0x01AC) +#define CR108 CTL_REG(0x01B0) +#define CR109 CTL_REG(0x01B4) +#define CR110 CTL_REG(0x01B8) +#define CR111 CTL_REG(0x01BC) +#define CR112 CTL_REG(0x01C0) +#define CR113 CTL_REG(0x01C4) +#define CR114 CTL_REG(0x01C8) +#define CR115 CTL_REG(0x01CC) +#define CR116 CTL_REG(0x01D0) +#define CR117 CTL_REG(0x01D4) +#define CR118 CTL_REG(0x01D8) +#define CR119 CTL_REG(0x01DC) +#define CR120 CTL_REG(0x01E0) +#define CR121 CTL_REG(0x01E4) +#define CR122 CTL_REG(0x01E8) +#define CR123 CTL_REG(0x01EC) +#define CR124 CTL_REG(0x01F0) +#define CR125 CTL_REG(0x01F4) +#define CR126 CTL_REG(0x01F8) +#define CR127 CTL_REG(0x01FC) +#define CR128 CTL_REG(0x0200) +#define CR129 CTL_REG(0x0204) +#define CR130 CTL_REG(0x0208) +#define CR131 CTL_REG(0x020C) +#define CR132 CTL_REG(0x0210) +#define CR133 CTL_REG(0x0214) +#define CR134 CTL_REG(0x0218) +#define CR135 CTL_REG(0x021C) +#define CR136 CTL_REG(0x0220) +#define CR137 CTL_REG(0x0224) +#define CR138 CTL_REG(0x0228) +#define CR139 CTL_REG(0x022C) +#define CR140 CTL_REG(0x0230) +#define CR141 CTL_REG(0x0234) +#define CR142 CTL_REG(0x0238) +#define CR143 CTL_REG(0x023C) +#define CR144 CTL_REG(0x0240) +#define CR145 CTL_REG(0x0244) +#define CR146 CTL_REG(0x0248) +#define CR147 CTL_REG(0x024C) +#define CR148 CTL_REG(0x0250) +#define CR149 CTL_REG(0x0254) +#define CR150 CTL_REG(0x0258) +#define CR151 CTL_REG(0x025C) +#define CR152 CTL_REG(0x0260) +#define CR153 CTL_REG(0x0264) +#define CR154 CTL_REG(0x0268) +#define CR155 CTL_REG(0x026C) +#define CR156 CTL_REG(0x0270) +#define CR157 CTL_REG(0x0274) +#define CR158 CTL_REG(0x0278) +#define CR159 CTL_REG(0x027C) +#define CR160 CTL_REG(0x0280) +#define CR161 CTL_REG(0x0284) +#define CR162 CTL_REG(0x0288) +#define CR163 CTL_REG(0x028C) +#define CR164 CTL_REG(0x0290) +#define CR165 CTL_REG(0x0294) +#define CR166 CTL_REG(0x0298) +#define CR167 CTL_REG(0x029C) +#define CR168 CTL_REG(0x02A0) +#define CR169 CTL_REG(0x02A4) +#define CR170 CTL_REG(0x02A8) +#define CR171 CTL_REG(0x02AC) +#define CR172 CTL_REG(0x02B0) +#define CR173 CTL_REG(0x02B4) +#define CR174 CTL_REG(0x02B8) +#define CR175 CTL_REG(0x02BC) +#define CR176 CTL_REG(0x02C0) +#define CR177 CTL_REG(0x02C4) +#define CR178 CTL_REG(0x02C8) +#define CR179 CTL_REG(0x02CC) +#define CR180 CTL_REG(0x02D0) +#define CR181 CTL_REG(0x02D4) +#define CR182 CTL_REG(0x02D8) +#define CR183 CTL_REG(0x02DC) +#define CR184 CTL_REG(0x02E0) +#define CR185 CTL_REG(0x02E4) +#define CR186 CTL_REG(0x02E8) +#define CR187 CTL_REG(0x02EC) +#define CR188 CTL_REG(0x02F0) +#define CR189 CTL_REG(0x02F4) +#define CR190 CTL_REG(0x02F8) +#define CR191 CTL_REG(0x02FC) +#define CR192 CTL_REG(0x0300) +#define CR193 CTL_REG(0x0304) +#define CR194 CTL_REG(0x0308) +#define CR195 CTL_REG(0x030C) +#define CR196 CTL_REG(0x0310) +#define CR197 CTL_REG(0x0314) +#define CR198 CTL_REG(0x0318) +#define CR199 CTL_REG(0x031C) +#define CR200 CTL_REG(0x0320) +#define CR201 CTL_REG(0x0324) +#define CR202 CTL_REG(0x0328) +#define CR203 CTL_REG(0x032C) /* I2C bus template value & flash control */ +#define CR204 CTL_REG(0x0330) +#define CR205 CTL_REG(0x0334) +#define CR206 CTL_REG(0x0338) +#define CR207 CTL_REG(0x033C) +#define CR208 CTL_REG(0x0340) +#define CR209 CTL_REG(0x0344) +#define CR210 CTL_REG(0x0348) +#define CR211 CTL_REG(0x034C) +#define CR212 CTL_REG(0x0350) +#define CR213 CTL_REG(0x0354) +#define CR214 CTL_REG(0x0358) +#define CR215 CTL_REG(0x035C) +#define CR216 CTL_REG(0x0360) +#define CR217 CTL_REG(0x0364) +#define CR218 CTL_REG(0x0368) +#define CR219 CTL_REG(0x036C) +#define CR220 CTL_REG(0x0370) +#define CR221 CTL_REG(0x0374) +#define CR222 CTL_REG(0x0378) +#define CR223 CTL_REG(0x037C) +#define CR224 CTL_REG(0x0380) +#define CR225 CTL_REG(0x0384) +#define CR226 CTL_REG(0x0388) +#define CR227 CTL_REG(0x038C) +#define CR228 CTL_REG(0x0390) +#define CR229 CTL_REG(0x0394) +#define CR230 CTL_REG(0x0398) +#define CR231 CTL_REG(0x039C) +#define CR232 CTL_REG(0x03A0) +#define CR233 CTL_REG(0x03A4) +#define CR234 CTL_REG(0x03A8) +#define CR235 CTL_REG(0x03AC) +#define CR236 CTL_REG(0x03B0) + +#define CR240 CTL_REG(0x03C0) +/* bit 7: host-controlled RF register writes + * CR241-CR245: for hardware controlled writing of RF bits, not needed for + * USB + */ +#define CR241 CTL_REG(0x03C4) +#define CR242 CTL_REG(0x03C8) +#define CR243 CTL_REG(0x03CC) +#define CR244 CTL_REG(0x03D0) +#define CR245 CTL_REG(0x03D4) + +#define CR251 CTL_REG(0x03EC) /* only used for activation and deactivation of + * Airoha RFs AL2230 and AL7230B + */ +#define CR252 CTL_REG(0x03F0) +#define CR253 CTL_REG(0x03F4) +#define CR254 CTL_REG(0x03F8) +#define CR255 CTL_REG(0x03FC) + +#define CR_MAX_PHY_REG 255 + +/* Taken from the ZYDAS driver, not all of them are relevant for the ZSD1211 + * driver. + */ + +#define CR_RF_IF_CLK CTL_REG(0x0400) +#define CR_RF_IF_DATA CTL_REG(0x0404) +#define CR_PE1_PE2 CTL_REG(0x0408) +#define CR_PE2_DLY CTL_REG(0x040C) +#define CR_LE1 CTL_REG(0x0410) +#define CR_LE2 CTL_REG(0x0414) +/* Seems to enable/disable GPI (General Purpose IO?) */ +#define CR_GPI_EN CTL_REG(0x0418) +#define CR_RADIO_PD CTL_REG(0x042C) +#define CR_RF2948_PD CTL_REG(0x042C) +#define CR_ENABLE_PS_MANUAL_AGC CTL_REG(0x043C) +#define CR_CONFIG_PHILIPS CTL_REG(0x0440) +#define CR_SA2400_SER_AP CTL_REG(0x0444) +#define CR_I2C_WRITE CTL_REG(0x0444) +#define CR_SA2400_SER_RP CTL_REG(0x0448) +#define CR_RADIO_PE CTL_REG(0x0458) +#define CR_RST_BUS_MASTER CTL_REG(0x045C) +#define CR_RFCFG CTL_REG(0x0464) +#define CR_HSTSCHG CTL_REG(0x046C) +#define CR_PHY_ON CTL_REG(0x0474) +#define CR_RX_DELAY CTL_REG(0x0478) +#define CR_RX_PE_DELAY CTL_REG(0x047C) +#define CR_GPIO_1 CTL_REG(0x0490) +#define CR_GPIO_2 CTL_REG(0x0494) +#define CR_EncryBufMux CTL_REG(0x04A8) +#define CR_PS_CTRL CTL_REG(0x0500) +#define CR_ADDA_PWR_DWN CTL_REG(0x0504) +#define CR_ADDA_MBIAS_WARMTIME CTL_REG(0x0508) +#define CR_MAC_PS_STATE CTL_REG(0x050C) + +#define CR_INTERRUPT CTL_REG(0x0510) +#define INT_TX_COMPLETE 0x00000001 +#define INT_RX_COMPLETE 0x00000002 +#define INT_RETRY_FAIL 0x00000004 +#define INT_WAKEUP 0x00000008 +#define INT_DTIM_NOTIFY 0x00000020 +#define INT_CFG_NEXT_BCN 0x00000040 +#define INT_BUS_ABORT 0x00000080 +#define INT_TX_FIFO_READY 0x00000100 +#define INT_UART 0x00000200 +#define INT_TX_COMPLETE_EN 0x00010000 +#define INT_RX_COMPLETE_EN 0x00020000 +#define INT_RETRY_FAIL_EN 0x00040000 +#define INT_WAKEUP_EN 0x00080000 +#define INT_DTIM_NOTIFY_EN 0x00200000 +#define INT_CFG_NEXT_BCN_EN 0x00400000 +#define INT_BUS_ABORT_EN 0x00800000 +#define INT_TX_FIFO_READY_EN 0x01000000 +#define INT_UART_EN 0x02000000 + +#define CR_TSF_LOW_PART CTL_REG(0x0514) +#define CR_TSF_HIGH_PART CTL_REG(0x0518) + +/* Following three values are in time units (1024us) + * Following condition must be met: + * atim < tbtt < bcn + */ +#define CR_ATIM_WND_PERIOD CTL_REG(0x051C) +#define CR_BCN_INTERVAL CTL_REG(0x0520) +#define CR_PRE_TBTT CTL_REG(0x0524) +/* in units of TU(1024us) */ + +/* for UART support */ +#define CR_UART_RBR_THR_DLL CTL_REG(0x0540) +#define CR_UART_DLM_IER CTL_REG(0x0544) +#define CR_UART_IIR_FCR CTL_REG(0x0548) +#define CR_UART_LCR CTL_REG(0x054c) +#define CR_UART_MCR CTL_REG(0x0550) +#define CR_UART_LSR CTL_REG(0x0554) +#define CR_UART_MSR CTL_REG(0x0558) +#define CR_UART_ECR CTL_REG(0x055c) +#define CR_UART_STATUS CTL_REG(0x0560) + +#define CR_PCI_TX_ADDR_P1 CTL_REG(0x0600) +#define CR_PCI_TX_AddR_P2 CTL_REG(0x0604) +#define CR_PCI_RX_AddR_P1 CTL_REG(0x0608) +#define CR_PCI_RX_AddR_P2 CTL_REG(0x060C) + +/* must be overwritten if custom MAC address will be used */ +#define CR_MAC_ADDR_P1 CTL_REG(0x0610) +#define CR_MAC_ADDR_P2 CTL_REG(0x0614) +#define CR_BSSID_P1 CTL_REG(0x0618) +#define CR_BSSID_P2 CTL_REG(0x061C) +#define CR_BCN_PLCP_CFG CTL_REG(0x0620) +#define CR_GROUP_HASH_P1 CTL_REG(0x0624) +#define CR_GROUP_HASH_P2 CTL_REG(0x0628) +#define CR_RX_TIMEOUT CTL_REG(0x062C) + +/* Basic rates supported by the BSS. When producing ACK or CTS messages, the + * device will use a rate in this table that is less than or equal to the rate + * of the incoming frame which prompted the response */ +#define CR_BASIC_RATE_TBL CTL_REG(0x0630) +#define CR_RATE_1M 0x0001 /* 802.11b */ +#define CR_RATE_2M 0x0002 /* 802.11b */ +#define CR_RATE_5_5M 0x0004 /* 802.11b */ +#define CR_RATE_11M 0x0008 /* 802.11b */ +#define CR_RATE_6M 0x0100 /* 802.11g */ +#define CR_RATE_9M 0x0200 /* 802.11g */ +#define CR_RATE_12M 0x0400 /* 802.11g */ +#define CR_RATE_18M 0x0800 /* 802.11g */ +#define CR_RATE_24M 0x1000 /* 802.11g */ +#define CR_RATE_36M 0x2000 /* 802.11g */ +#define CR_RATE_48M 0x4000 /* 802.11g */ +#define CR_RATE_54M 0x8000 /* 802.11g */ +#define CR_RATES_80211G 0xff00 +#define CR_RATES_80211B 0x000f + +/* Mandatory rates required in the BSS. When producing ACK or CTS messages, if + * the device could not find an appropriate rate in CR_BASIC_RATE_TBL, it will + * look for a rate in this table that is less than or equal to the rate of + * the incoming frame. */ +#define CR_MANDATORY_RATE_TBL CTL_REG(0x0634) +#define CR_RTS_CTS_RATE CTL_REG(0x0638) + +#define CR_WEP_PROTECT CTL_REG(0x063C) +#define CR_RX_THRESHOLD CTL_REG(0x0640) + +/* register for controlling the LEDS */ +#define CR_LED CTL_REG(0x0644) +/* masks for controlling LEDs */ +#define LED1 0x0100 +#define LED2 0x0200 + +/* Seems to indicate that the configuration is over. + */ +#define CR_AFTER_PNP CTL_REG(0x0648) +#define CR_ACK_TIME_80211 CTL_REG(0x0658) + +#define CR_RX_OFFSET CTL_REG(0x065c) + +#define CR_PHY_DELAY CTL_REG(0x066C) +#define CR_BCN_FIFO CTL_REG(0x0670) +#define CR_SNIFFER_ON CTL_REG(0x0674) + +#define CR_ENCRYPTION_TYPE CTL_REG(0x0678) +#define NO_WEP 0 +#define WEP64 1 +#define WEP128 5 +#define WEP256 6 +#define ENC_SNIFFER 8 + +#define CR_ZD1211_RETRY_MAX CTL_REG(0x067C) + +#define CR_REG1 CTL_REG(0x0680) +/* Setting the bit UNLOCK_PHY_REGS disallows the write access to physical + * registers, so one could argue it is a LOCK bit. But calling it + * LOCK_PHY_REGS makes it confusing. + */ +#define UNLOCK_PHY_REGS 0x0080 + +#define CR_DEVICE_STATE CTL_REG(0x0684) +#define CR_UNDERRUN_CNT CTL_REG(0x0688) + +#define CR_RX_FILTER CTL_REG(0x068c) +#define RX_FILTER_ASSOC_RESPONSE 0x0002 +#define RX_FILTER_PROBE_RESPONSE 0x0020 +#define RX_FILTER_BEACON 0x0100 +#define RX_FILTER_AUTH 0x0800 +/* Sniff modus sets filter to 0xfffff */ + +#define CR_ACK_TIMEOUT_EXT CTL_REG(0x0690) +#define CR_BCN_FIFO_SEMAPHORE CTL_REG(0x0694) +#define CR_IFS_VALUE CTL_REG(0x0698) +#define CR_RX_TIME_OUT CTL_REG(0x069C) +#define CR_TOTAL_RX_FRM CTL_REG(0x06A0) +#define CR_CRC32_CNT CTL_REG(0x06A4) +#define CR_CRC16_CNT CTL_REG(0x06A8) +#define CR_DECRYPTION_ERR_UNI CTL_REG(0x06AC) +#define CR_RX_FIFO_OVERRUN CTL_REG(0x06B0) + +#define CR_DECRYPTION_ERR_MUL CTL_REG(0x06BC) + +#define CR_NAV_CNT CTL_REG(0x06C4) +#define CR_NAV_CCA CTL_REG(0x06C8) +#define CR_RETRY_CNT CTL_REG(0x06CC) + +#define CR_READ_TCB_ADDR CTL_REG(0x06E8) +#define CR_READ_RFD_ADDR CTL_REG(0x06EC) +#define CR_CWMIN_CWMAX CTL_REG(0x06F0) +#define CR_TOTAL_TX_FRM CTL_REG(0x06F4) + +/* CAM: Continuous Access Mode (power management) */ +#define CR_CAM_MODE CTL_REG(0x0700) +#define CR_CAM_ROLL_TB_LOW CTL_REG(0x0704) +#define CR_CAM_ROLL_TB_HIGH CTL_REG(0x0708) +#define CR_CAM_ADDRESS CTL_REG(0x070C) +#define CR_CAM_DATA CTL_REG(0x0710) + +#define CR_ROMDIR CTL_REG(0x0714) + +#define CR_DECRY_ERR_FLG_LOW CTL_REG(0x0714) +#define CR_DECRY_ERR_FLG_HIGH CTL_REG(0x0718) + +#define CR_WEPKEY0 CTL_REG(0x0720) +#define CR_WEPKEY1 CTL_REG(0x0724) +#define CR_WEPKEY2 CTL_REG(0x0728) +#define CR_WEPKEY3 CTL_REG(0x072C) +#define CR_WEPKEY4 CTL_REG(0x0730) +#define CR_WEPKEY5 CTL_REG(0x0734) +#define CR_WEPKEY6 CTL_REG(0x0738) +#define CR_WEPKEY7 CTL_REG(0x073C) +#define CR_WEPKEY8 CTL_REG(0x0740) +#define CR_WEPKEY9 CTL_REG(0x0744) +#define CR_WEPKEY10 CTL_REG(0x0748) +#define CR_WEPKEY11 CTL_REG(0x074C) +#define CR_WEPKEY12 CTL_REG(0x0750) +#define CR_WEPKEY13 CTL_REG(0x0754) +#define CR_WEPKEY14 CTL_REG(0x0758) +#define CR_WEPKEY15 CTL_REG(0x075c) +#define CR_TKIP_MODE CTL_REG(0x0760) + +#define CR_EEPROM_PROTECT0 CTL_REG(0x0758) +#define CR_EEPROM_PROTECT1 CTL_REG(0x075C) + +#define CR_DBG_FIFO_RD CTL_REG(0x0800) +#define CR_DBG_SELECT CTL_REG(0x0804) +#define CR_FIFO_Length CTL_REG(0x0808) + + +#define CR_RSSI_MGC CTL_REG(0x0810) + +#define CR_PON CTL_REG(0x0818) +#define CR_RX_ON CTL_REG(0x081C) +#define CR_TX_ON CTL_REG(0x0820) +#define CR_CHIP_EN CTL_REG(0x0824) +#define CR_LO_SW CTL_REG(0x0828) +#define CR_TXRX_SW CTL_REG(0x082C) +#define CR_S_MD CTL_REG(0x0830) + +#define CR_USB_DEBUG_PORT CTL_REG(0x0888) + +#define CR_ZD1211B_TX_PWR_CTL1 CTL_REG(0x0b00) +#define CR_ZD1211B_TX_PWR_CTL2 CTL_REG(0x0b04) +#define CR_ZD1211B_TX_PWR_CTL3 CTL_REG(0x0b08) +#define CR_ZD1211B_TX_PWR_CTL4 CTL_REG(0x0b0c) +#define CR_ZD1211B_AIFS_CTL1 CTL_REG(0x0b10) +#define CR_ZD1211B_AIFS_CTL2 CTL_REG(0x0b14) +#define CR_ZD1211B_TXOP CTL_REG(0x0b20) +#define CR_ZD1211B_RETRY_MAX CTL_REG(0x0b28) + +#define AP_RX_FILTER 0x0400feff +#define STA_RX_FILTER 0x0000ffff + +#define CWIN_SIZE 0x007f043f + + +#define HWINT_ENABLED 0x004f0000 +#define HWINT_DISABLED 0 + +#define E2P_PWR_INT_GUARD 8 +#define E2P_CHANNEL_COUNT 14 + +/* If you compare this addresses with the ZYDAS orignal driver, please notify + * that we use word mapping for the EEPROM. + */ + +/* + * Upper 16 bit contains the regulatory domain. + */ +#define E2P_SUBID E2P_REG(0x00) +#define E2P_POD E2P_REG(0x02) +#define E2P_MAC_ADDR_P1 E2P_REG(0x04) +#define E2P_MAC_ADDR_P2 E2P_REG(0x06) +#define E2P_PWR_CAL_VALUE1 E2P_REG(0x08) +#define E2P_PWR_CAL_VALUE2 E2P_REG(0x0a) +#define E2P_PWR_CAL_VALUE3 E2P_REG(0x0c) +#define E2P_PWR_CAL_VALUE4 E2P_REG(0x0e) +#define E2P_PWR_INT_VALUE1 E2P_REG(0x10) +#define E2P_PWR_INT_VALUE2 E2P_REG(0x12) +#define E2P_PWR_INT_VALUE3 E2P_REG(0x14) +#define E2P_PWR_INT_VALUE4 E2P_REG(0x16) + +/* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30) + * also only 11 channels. */ +#define E2P_ALLOWED_CHANNEL E2P_REG(0x18) + +#define E2P_PHY_REG E2P_REG(0x1a) +#define E2P_DEVICE_VER E2P_REG(0x20) +#define E2P_36M_CAL_VALUE1 E2P_REG(0x28) +#define E2P_36M_CAL_VALUE2 E2P_REG(0x2a) +#define E2P_36M_CAL_VALUE3 E2P_REG(0x2c) +#define E2P_36M_CAL_VALUE4 E2P_REG(0x2e) +#define E2P_11A_INT_VALUE1 E2P_REG(0x30) +#define E2P_11A_INT_VALUE2 E2P_REG(0x32) +#define E2P_11A_INT_VALUE3 E2P_REG(0x34) +#define E2P_11A_INT_VALUE4 E2P_REG(0x36) +#define E2P_48M_CAL_VALUE1 E2P_REG(0x38) +#define E2P_48M_CAL_VALUE2 E2P_REG(0x3a) +#define E2P_48M_CAL_VALUE3 E2P_REG(0x3c) +#define E2P_48M_CAL_VALUE4 E2P_REG(0x3e) +#define E2P_48M_INT_VALUE1 E2P_REG(0x40) +#define E2P_48M_INT_VALUE2 E2P_REG(0x42) +#define E2P_48M_INT_VALUE3 E2P_REG(0x44) +#define E2P_48M_INT_VALUE4 E2P_REG(0x46) +#define E2P_54M_CAL_VALUE1 E2P_REG(0x48) /* ??? */ +#define E2P_54M_CAL_VALUE2 E2P_REG(0x4a) +#define E2P_54M_CAL_VALUE3 E2P_REG(0x4c) +#define E2P_54M_CAL_VALUE4 E2P_REG(0x4e) +#define E2P_54M_INT_VALUE1 E2P_REG(0x50) +#define E2P_54M_INT_VALUE2 E2P_REG(0x52) +#define E2P_54M_INT_VALUE3 E2P_REG(0x54) +#define E2P_54M_INT_VALUE4 E2P_REG(0x56) + +/* All 16 bit values */ +#define FW_FIRMWARE_VER FW_REG(0) +/* non-zero if USB high speed connection */ +#define FW_USB_SPEED FW_REG(1) +#define FW_FIX_TX_RATE FW_REG(2) +/* Seems to be able to control LEDs over the firmware */ +#define FW_LINK_STATUS FW_REG(3) +#define FW_SOFT_RESET FW_REG(4) +#define FW_FLASH_CHK FW_REG(5) + +enum { + CR_BASE_OFFSET = 0x9000, + FW_START_OFFSET = 0xee00, + FW_BASE_ADDR_OFFSET = FW_START_OFFSET + 0x1d, + EEPROM_START_OFFSET = 0xf800, + EEPROM_SIZE = 0x800, /* words */ + LOAD_CODE_SIZE = 0xe, /* words */ + LOAD_VECT_SIZE = 0x10000 - 0xfff7, /* words */ + EEPROM_REGS_OFFSET = LOAD_CODE_SIZE + LOAD_VECT_SIZE, + E2P_BASE_OFFSET = EEPROM_START_OFFSET + + EEPROM_REGS_OFFSET, +}; + +#define FW_REG_TABLE_ADDR USB_ADDR(FW_START_OFFSET + 0x1d) + +enum { + /* indices for ofdm_cal_values */ + OFDM_36M_INDEX = 0, + OFDM_48M_INDEX = 1, + OFDM_54M_INDEX = 2, +}; + +struct zd_chip { + struct zd_usb usb; + struct zd_rf rf; + struct mutex mutex; + u8 e2p_mac[ETH_ALEN]; + /* EepSetPoint in the vendor driver */ + u8 pwr_cal_values[E2P_CHANNEL_COUNT]; + /* integration values in the vendor driver */ + u8 pwr_int_values[E2P_CHANNEL_COUNT]; + /* SetPointOFDM in the vendor driver */ + u8 ofdm_cal_values[3][E2P_CHANNEL_COUNT]; + u8 pa_type:4, patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1, + is_zd1211b:1; +}; + +static inline struct zd_chip *zd_usb_to_chip(struct zd_usb *usb) +{ + return container_of(usb, struct zd_chip, usb); +} + +static inline struct zd_chip *zd_rf_to_chip(struct zd_rf *rf) +{ + return container_of(rf, struct zd_chip, rf); +} + +#define zd_chip_dev(chip) (&(chip)->usb.intf->dev) + +void zd_chip_init(struct zd_chip *chip, + struct net_device *netdev, + struct usb_interface *intf); +void zd_chip_clear(struct zd_chip *chip); +int zd_chip_init_hw(struct zd_chip *chip, u8 device_type); +int zd_chip_reset(struct zd_chip *chip); + +static inline int zd_ioread16v_locked(struct zd_chip *chip, u16 *values, + const zd_addr_t *addresses, + unsigned int count) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_ioread16v(&chip->usb, values, addresses, count); +} + +static inline int zd_ioread16_locked(struct zd_chip *chip, u16 *value, + const zd_addr_t addr) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_ioread16(&chip->usb, value, addr); +} + +int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, + const zd_addr_t *addresses, unsigned int count); + +static inline int zd_ioread32_locked(struct zd_chip *chip, u32 *value, + const zd_addr_t addr) +{ + return zd_ioread32v_locked(chip, value, (const zd_addr_t *)&addr, 1); +} + +static inline int zd_iowrite16_locked(struct zd_chip *chip, u16 value, + zd_addr_t addr) +{ + struct zd_ioreq16 ioreq; + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + ioreq.addr = addr; + ioreq.value = value; + + return zd_usb_iowrite16v(&chip->usb, &ioreq, 1); +} + +int zd_iowrite16a_locked(struct zd_chip *chip, + const struct zd_ioreq16 *ioreqs, unsigned int count); + +int _zd_iowrite32v_locked(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count); + +static inline int zd_iowrite32_locked(struct zd_chip *chip, u32 value, + zd_addr_t addr) +{ + struct zd_ioreq32 ioreq; + + ioreq.addr = addr; + ioreq.value = value; + + return _zd_iowrite32v_locked(chip, &ioreq, 1); +} + +int zd_iowrite32a_locked(struct zd_chip *chip, + const struct zd_ioreq32 *ioreqs, unsigned int count); + +static inline int zd_rfwrite_locked(struct zd_chip *chip, u32 value, u8 bits) +{ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + return zd_usb_rfwrite(&chip->usb, value, bits); +} + +int zd_rfwritev_locked(struct zd_chip *chip, + const u32* values, unsigned int count, u8 bits); + +/* Locking functions for reading and writing registers. + * The different parameters are intentional. + */ +int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value); +int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value); +int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value); +int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value); +int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses, + u32 *values, unsigned int count); +int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, + unsigned int count); + +int zd_chip_set_channel(struct zd_chip *chip, u8 channel); +static inline u8 _zd_chip_get_channel(struct zd_chip *chip) +{ + return chip->rf.channel; +} +u8 zd_chip_get_channel(struct zd_chip *chip); +int zd_read_regdomain(struct zd_chip *chip, u8 *regdomain); +void zd_get_e2p_mac_addr(struct zd_chip *chip, u8 *mac_addr); +int zd_read_mac_addr(struct zd_chip *chip, u8 *mac_addr); +int zd_write_mac_addr(struct zd_chip *chip, const u8 *mac_addr); +int zd_chip_switch_radio_on(struct zd_chip *chip); +int zd_chip_switch_radio_off(struct zd_chip *chip); +int zd_chip_enable_int(struct zd_chip *chip); +void zd_chip_disable_int(struct zd_chip *chip); +int zd_chip_enable_rx(struct zd_chip *chip); +void zd_chip_disable_rx(struct zd_chip *chip); +int zd_chip_enable_hwint(struct zd_chip *chip); +int zd_chip_disable_hwint(struct zd_chip *chip); + +static inline int zd_get_encryption_type(struct zd_chip *chip, u32 *type) +{ + return zd_ioread32(chip, CR_ENCRYPTION_TYPE, type); +} + +static inline int zd_set_encryption_type(struct zd_chip *chip, u32 type) +{ + return zd_iowrite32(chip, CR_ENCRYPTION_TYPE, type); +} + +static inline int zd_chip_get_basic_rates(struct zd_chip *chip, u16 *cr_rates) +{ + return zd_ioread16(chip, CR_BASIC_RATE_TBL, cr_rates); +} + +int zd_chip_set_basic_rates(struct zd_chip *chip, u16 cr_rates); + +static inline int zd_chip_set_rx_filter(struct zd_chip *chip, u32 filter) +{ + return zd_iowrite32(chip, CR_RX_FILTER, filter); +} + +int zd_chip_lock_phy_regs(struct zd_chip *chip); +int zd_chip_unlock_phy_regs(struct zd_chip *chip); + +enum led_status { + LED_OFF = 0, + LED_ON = 1, + LED_FLIP = 2, + LED_STATUS = 3, +}; + +int zd_chip_led_status(struct zd_chip *chip, int led, enum led_status status); +int zd_chip_led_flip(struct zd_chip *chip, int led, + const unsigned int *phases_msecs, unsigned int count); + +int zd_set_beacon_interval(struct zd_chip *chip, u32 interval); + +static inline int zd_get_beacon_interval(struct zd_chip *chip, u32 *interval) +{ + return zd_ioread32(chip, CR_BCN_INTERVAL, interval); +} + +struct rx_status; + +u8 zd_rx_qual_percent(const void *rx_frame, unsigned int size, + const struct rx_status *status); +u8 zd_rx_strength_percent(u8 rssi); + +u16 zd_rx_rate(const void *rx_frame, const struct rx_status *status); + +#endif /* _ZD_CHIP_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_def.h b/drivers/net/wireless/zd1211rw/zd_def.h new file mode 100644 index 00000000000..465906812fc --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_def.h @@ -0,0 +1,48 @@ +/* zd_def.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_DEF_H +#define _ZD_DEF_H + +#include <linux/kernel.h> +#include <linux/stringify.h> +#include <linux/device.h> +#include <linux/kernel.h> + +#define dev_printk_f(level, dev, fmt, args...) \ + dev_printk(level, dev, "%s() " fmt, __func__, ##args) + +#ifdef DEBUG +# define dev_dbg_f(dev, fmt, args...) \ + dev_printk_f(KERN_DEBUG, dev, fmt, ## args) +#else +# define dev_dbg_f(dev, fmt, args...) do { (void)(dev); } while (0) +#endif /* DEBUG */ + +#ifdef DEBUG +# define ZD_ASSERT(x) \ +do { \ + if (!(x)) { \ + pr_debug("%s:%d ASSERT %s VIOLATED!\n", \ + __FILE__, __LINE__, __stringify(x)); \ + } \ +} while (0) +#else +# define ZD_ASSERT(x) do { } while (0) +#endif + +#endif /* _ZD_DEF_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.c b/drivers/net/wireless/zd1211rw/zd_ieee80211.c new file mode 100644 index 00000000000..66905f7b61f --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.c @@ -0,0 +1,191 @@ +/* zd_ieee80211.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * A lot of this code is generic and should be moved into the upper layers + * at some point. + */ + +#include <linux/errno.h> +#include <linux/wireless.h> +#include <linux/kernel.h> +#include <net/ieee80211.h> + +#include "zd_def.h" +#include "zd_ieee80211.h" +#include "zd_mac.h" + +static const struct channel_range channel_ranges[] = { + [0] = { 0, 0}, + [ZD_REGDOMAIN_FCC] = { 1, 12}, + [ZD_REGDOMAIN_IC] = { 1, 12}, + [ZD_REGDOMAIN_ETSI] = { 1, 14}, + [ZD_REGDOMAIN_JAPAN] = { 1, 14}, + [ZD_REGDOMAIN_SPAIN] = { 1, 14}, + [ZD_REGDOMAIN_FRANCE] = { 1, 14}, + [ZD_REGDOMAIN_JAPAN_ADD] = {14, 15}, +}; + +const struct channel_range *zd_channel_range(u8 regdomain) +{ + if (regdomain >= ARRAY_SIZE(channel_ranges)) + regdomain = 0; + return &channel_ranges[regdomain]; +} + +int zd_regdomain_supports_channel(u8 regdomain, u8 channel) +{ + const struct channel_range *range = zd_channel_range(regdomain); + return range->start <= channel && channel < range->end; +} + +int zd_regdomain_supported(u8 regdomain) +{ + const struct channel_range *range = zd_channel_range(regdomain); + return range->start != 0; +} + +/* Stores channel frequencies in MHz. */ +static const u16 channel_frequencies[] = { + 2412, 2417, 2422, 2427, 2432, 2437, 2442, 2447, + 2452, 2457, 2462, 2467, 2472, 2484, +}; + +#define NUM_CHANNELS ARRAY_SIZE(channel_frequencies) + +static int compute_freq(struct iw_freq *freq, u32 mhz, u32 hz) +{ + u32 factor; + + freq->e = 0; + if (mhz >= 1000000000U) { + pr_debug("zd1211 mhz %u to large\n", mhz); + freq->m = 0; + return -EINVAL; + } + + factor = 1000; + while (mhz >= factor) { + + freq->e += 1; + factor *= 10; + } + + factor /= 1000U; + freq->m = mhz * (1000000U/factor) + hz/factor; + + return 0; +} + +int zd_channel_to_freq(struct iw_freq *freq, u8 channel) +{ + if (channel > NUM_CHANNELS) { + freq->m = 0; + freq->e = 0; + return -EINVAL; + } + if (!channel) { + freq->m = 0; + freq->e = 0; + return -EINVAL; + } + return compute_freq(freq, channel_frequencies[channel-1], 0); +} + +static int freq_to_mhz(const struct iw_freq *freq) +{ + u32 factor; + int e; + + /* Such high frequencies are not supported. */ + if (freq->e > 6) + return -EINVAL; + + factor = 1; + for (e = freq->e; e > 0; --e) { + factor *= 10; + } + factor = 1000000U / factor; + + if (freq->m % factor) { + return -EINVAL; + } + + return freq->m / factor; +} + +int zd_find_channel(u8 *channel, const struct iw_freq *freq) +{ + int i, r; + u32 mhz; + + if (!(freq->flags & IW_FREQ_FIXED)) + return 0; + + if (freq->m < 1000) { + if (freq->m > NUM_CHANNELS || freq->m == 0) + return -EINVAL; + *channel = freq->m; + return 1; + } + + r = freq_to_mhz(freq); + if (r < 0) + return r; + mhz = r; + + for (i = 0; i < NUM_CHANNELS; i++) { + if (mhz == channel_frequencies[i]) { + *channel = i+1; + return 1; + } + } + + return -EINVAL; +} + +int zd_geo_init(struct ieee80211_device *ieee, u8 regdomain) +{ + struct ieee80211_geo geo; + const struct channel_range *range; + int i; + u8 channel; + + dev_dbg(zd_mac_dev(zd_netdev_mac(ieee->dev)), + "regdomain %#04x\n", regdomain); + + range = zd_channel_range(regdomain); + if (range->start == 0) { + dev_err(zd_mac_dev(zd_netdev_mac(ieee->dev)), + "zd1211 regdomain %#04x not supported\n", + regdomain); + return -EINVAL; + } + + memset(&geo, 0, sizeof(geo)); + + for (i = 0, channel = range->start; channel < range->end; channel++) { + struct ieee80211_channel *chan = &geo.bg[i++]; + chan->freq = channel_frequencies[channel - 1]; + chan->channel = channel; + } + + geo.bg_channels = i; + memcpy(geo.name, "XX ", 4); + ieee80211_set_geo(ieee, &geo); + return 0; +} diff --git a/drivers/net/wireless/zd1211rw/zd_ieee80211.h b/drivers/net/wireless/zd1211rw/zd_ieee80211.h new file mode 100644 index 00000000000..36329890dfe --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_ieee80211.h @@ -0,0 +1,85 @@ +#ifndef _ZD_IEEE80211_H +#define _ZD_IEEE80211_H + +#include <net/ieee80211.h> +#include "zd_types.h" + +/* Additional definitions from the standards. + */ + +#define ZD_REGDOMAIN_FCC 0x10 +#define ZD_REGDOMAIN_IC 0x20 +#define ZD_REGDOMAIN_ETSI 0x30 +#define ZD_REGDOMAIN_SPAIN 0x31 +#define ZD_REGDOMAIN_FRANCE 0x32 +#define ZD_REGDOMAIN_JAPAN_ADD 0x40 +#define ZD_REGDOMAIN_JAPAN 0x41 + +enum { + MIN_CHANNEL24 = 1, + MAX_CHANNEL24 = 14, +}; + +struct channel_range { + u8 start; + u8 end; /* exclusive (channel must be less than end) */ +}; + +struct iw_freq; + +int zd_geo_init(struct ieee80211_device *ieee, u8 regdomain); + +const struct channel_range *zd_channel_range(u8 regdomain); +int zd_regdomain_supports_channel(u8 regdomain, u8 channel); +int zd_regdomain_supported(u8 regdomain); + +/* for 2.4 GHz band */ +int zd_channel_to_freq(struct iw_freq *freq, u8 channel); +int zd_find_channel(u8 *channel, const struct iw_freq *freq); + +#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80 + +struct ofdm_plcp_header { + u8 prefix[3]; + __le16 service; +} __attribute__((packed)); + +static inline u8 zd_ofdm_plcp_header_rate( + const struct ofdm_plcp_header *header) +{ + return header->prefix[0] & 0xf; +} + +#define ZD_OFDM_RATE_6M 0xb +#define ZD_OFDM_RATE_9M 0xf +#define ZD_OFDM_RATE_12M 0xa +#define ZD_OFDM_RATE_18M 0xe +#define ZD_OFDM_RATE_24M 0x9 +#define ZD_OFDM_RATE_36M 0xd +#define ZD_OFDM_RATE_48M 0x8 +#define ZD_OFDM_RATE_54M 0xc + +struct cck_plcp_header { + u8 signal; + u8 service; + __le16 length; + __le16 crc16; +} __attribute__((packed)); + +static inline u8 zd_cck_plcp_header_rate(const struct cck_plcp_header *header) +{ + return header->signal; +} + +#define ZD_CCK_SIGNAL_1M 0x0a +#define ZD_CCK_SIGNAL_2M 0x14 +#define ZD_CCK_SIGNAL_5M5 0x37 +#define ZD_CCK_SIGNAL_11M 0x6e + +enum ieee80211_std { + IEEE80211B = 0x01, + IEEE80211A = 0x02, + IEEE80211G = 0x04, +}; + +#endif /* _ZD_IEEE80211_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c new file mode 100644 index 00000000000..3bdc54d128d --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -0,0 +1,1057 @@ +/* zd_mac.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/wireless.h> +#include <linux/usb.h> +#include <linux/jiffies.h> +#include <net/ieee80211_radiotap.h> + +#include "zd_def.h" +#include "zd_chip.h" +#include "zd_mac.h" +#include "zd_ieee80211.h" +#include "zd_netdev.h" +#include "zd_rf.h" +#include "zd_util.h" + +static void ieee_init(struct ieee80211_device *ieee); +static void softmac_init(struct ieee80211softmac_device *sm); + +int zd_mac_init(struct zd_mac *mac, + struct net_device *netdev, + struct usb_interface *intf) +{ + struct ieee80211_device *ieee = zd_netdev_ieee80211(netdev); + + memset(mac, 0, sizeof(*mac)); + spin_lock_init(&mac->lock); + mac->netdev = netdev; + + ieee_init(ieee); + softmac_init(ieee80211_priv(netdev)); + zd_chip_init(&mac->chip, netdev, intf); + return 0; +} + +static int reset_channel(struct zd_mac *mac) +{ + int r; + unsigned long flags; + const struct channel_range *range; + + spin_lock_irqsave(&mac->lock, flags); + range = zd_channel_range(mac->regdomain); + if (!range->start) { + r = -EINVAL; + goto out; + } + mac->requested_channel = range->start; + r = 0; +out: + spin_unlock_irqrestore(&mac->lock, flags); + return r; +} + +int zd_mac_init_hw(struct zd_mac *mac, u8 device_type) +{ + int r; + struct zd_chip *chip = &mac->chip; + u8 addr[ETH_ALEN]; + u8 default_regdomain; + + r = zd_chip_enable_int(chip); + if (r) + goto out; + r = zd_chip_init_hw(chip, device_type); + if (r) + goto disable_int; + + zd_get_e2p_mac_addr(chip, addr); + r = zd_write_mac_addr(chip, addr); + if (r) + goto disable_int; + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&mac->lock); + memcpy(mac->netdev->dev_addr, addr, ETH_ALEN); + spin_unlock_irq(&mac->lock); + + r = zd_read_regdomain(chip, &default_regdomain); + if (r) + goto disable_int; + if (!zd_regdomain_supported(default_regdomain)) { + dev_dbg_f(zd_mac_dev(mac), + "Regulatory Domain %#04x is not supported.\n", + default_regdomain); + r = -EINVAL; + goto disable_int; + } + spin_lock_irq(&mac->lock); + mac->regdomain = mac->default_regdomain = default_regdomain; + spin_unlock_irq(&mac->lock); + r = reset_channel(mac); + if (r) + goto disable_int; + + r = zd_set_encryption_type(chip, NO_WEP); + if (r) + goto disable_int; + + r = zd_geo_init(zd_mac_to_ieee80211(mac), mac->regdomain); + if (r) + goto disable_int; + + r = 0; +disable_int: + zd_chip_disable_int(chip); +out: + return r; +} + +void zd_mac_clear(struct zd_mac *mac) +{ + /* Aquire the lock. */ + spin_lock(&mac->lock); + spin_unlock(&mac->lock); + zd_chip_clear(&mac->chip); + memset(mac, 0, sizeof(*mac)); +} + +static int reset_mode(struct zd_mac *mac) +{ + struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + struct zd_ioreq32 ioreqs[3] = { + { CR_RX_FILTER, RX_FILTER_BEACON|RX_FILTER_PROBE_RESPONSE| + RX_FILTER_AUTH|RX_FILTER_ASSOC_RESPONSE }, + { CR_SNIFFER_ON, 0U }, + { CR_ENCRYPTION_TYPE, NO_WEP }, + }; + + if (ieee->iw_mode == IW_MODE_MONITOR) { + ioreqs[0].value = 0xffffffff; + ioreqs[1].value = 0x1; + ioreqs[2].value = ENC_SNIFFER; + } + + return zd_iowrite32a(&mac->chip, ioreqs, 3); +} + +int zd_mac_open(struct net_device *netdev) +{ + struct zd_mac *mac = zd_netdev_mac(netdev); + struct zd_chip *chip = &mac->chip; + int r; + + r = zd_chip_enable_int(chip); + if (r < 0) + goto out; + + r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G); + if (r < 0) + goto disable_int; + r = reset_mode(mac); + if (r) + goto disable_int; + r = zd_chip_switch_radio_on(chip); + if (r < 0) + goto disable_int; + r = zd_chip_set_channel(chip, mac->requested_channel); + if (r < 0) + goto disable_radio; + r = zd_chip_enable_rx(chip); + if (r < 0) + goto disable_radio; + r = zd_chip_enable_hwint(chip); + if (r < 0) + goto disable_rx; + + ieee80211softmac_start(netdev); + return 0; +disable_rx: + zd_chip_disable_rx(chip); +disable_radio: + zd_chip_switch_radio_off(chip); +disable_int: + zd_chip_disable_int(chip); +out: + return r; +} + +int zd_mac_stop(struct net_device *netdev) +{ + struct zd_mac *mac = zd_netdev_mac(netdev); + struct zd_chip *chip = &mac->chip; + + netif_stop_queue(netdev); + + /* + * The order here deliberately is a little different from the open() + * method, since we need to make sure there is no opportunity for RX + * frames to be processed by softmac after we have stopped it. + */ + + zd_chip_disable_rx(chip); + ieee80211softmac_stop(netdev); + + zd_chip_disable_hwint(chip); + zd_chip_switch_radio_off(chip); + zd_chip_disable_int(chip); + + return 0; +} + +int zd_mac_set_mac_address(struct net_device *netdev, void *p) +{ + int r; + unsigned long flags; + struct sockaddr *addr = p; + struct zd_mac *mac = zd_netdev_mac(netdev); + struct zd_chip *chip = &mac->chip; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + dev_dbg_f(zd_mac_dev(mac), + "Setting MAC to " MAC_FMT "\n", MAC_ARG(addr->sa_data)); + + r = zd_write_mac_addr(chip, addr->sa_data); + if (r) + return r; + + spin_lock_irqsave(&mac->lock, flags); + memcpy(netdev->dev_addr, addr->sa_data, ETH_ALEN); + spin_unlock_irqrestore(&mac->lock, flags); + + return 0; +} + +int zd_mac_set_regdomain(struct zd_mac *mac, u8 regdomain) +{ + int r; + u8 channel; + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&mac->lock); + if (regdomain == 0) { + regdomain = mac->default_regdomain; + } + if (!zd_regdomain_supported(regdomain)) { + spin_unlock_irq(&mac->lock); + return -EINVAL; + } + mac->regdomain = regdomain; + channel = mac->requested_channel; + spin_unlock_irq(&mac->lock); + + r = zd_geo_init(zd_mac_to_ieee80211(mac), regdomain); + if (r) + return r; + if (!zd_regdomain_supports_channel(regdomain, channel)) { + r = reset_channel(mac); + if (r) + return r; + } + + return 0; +} + +u8 zd_mac_get_regdomain(struct zd_mac *mac) +{ + unsigned long flags; + u8 regdomain; + + spin_lock_irqsave(&mac->lock, flags); + regdomain = mac->regdomain; + spin_unlock_irqrestore(&mac->lock, flags); + return regdomain; +} + +static void set_channel(struct net_device *netdev, u8 channel) +{ + struct zd_mac *mac = zd_netdev_mac(netdev); + + dev_dbg_f(zd_mac_dev(mac), "channel %d\n", channel); + + zd_chip_set_channel(&mac->chip, channel); +} + +/* TODO: Should not work in Managed mode. */ +int zd_mac_request_channel(struct zd_mac *mac, u8 channel) +{ + unsigned long lock_flags; + struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + + if (ieee->iw_mode == IW_MODE_INFRA) + return -EPERM; + + spin_lock_irqsave(&mac->lock, lock_flags); + if (!zd_regdomain_supports_channel(mac->regdomain, channel)) { + spin_unlock_irqrestore(&mac->lock, lock_flags); + return -EINVAL; + } + mac->requested_channel = channel; + spin_unlock_irqrestore(&mac->lock, lock_flags); + if (netif_running(mac->netdev)) + return zd_chip_set_channel(&mac->chip, channel); + else + return 0; +} + +int zd_mac_get_channel(struct zd_mac *mac, u8 *channel, u8 *flags) +{ + struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + + *channel = zd_chip_get_channel(&mac->chip); + if (ieee->iw_mode != IW_MODE_INFRA) { + spin_lock_irq(&mac->lock); + *flags = *channel == mac->requested_channel ? + MAC_FIXED_CHANNEL : 0; + spin_unlock(&mac->lock); + } else { + *flags = 0; + } + dev_dbg_f(zd_mac_dev(mac), "channel %u flags %u\n", *channel, *flags); + return 0; +} + +/* If wrong rate is given, we are falling back to the slowest rate: 1MBit/s */ +static u8 cs_typed_rate(u8 cs_rate) +{ + static const u8 typed_rates[16] = { + [ZD_CS_CCK_RATE_1M] = ZD_CS_CCK|ZD_CS_CCK_RATE_1M, + [ZD_CS_CCK_RATE_2M] = ZD_CS_CCK|ZD_CS_CCK_RATE_2M, + [ZD_CS_CCK_RATE_5_5M] = ZD_CS_CCK|ZD_CS_CCK_RATE_5_5M, + [ZD_CS_CCK_RATE_11M] = ZD_CS_CCK|ZD_CS_CCK_RATE_11M, + [ZD_OFDM_RATE_6M] = ZD_CS_OFDM|ZD_OFDM_RATE_6M, + [ZD_OFDM_RATE_9M] = ZD_CS_OFDM|ZD_OFDM_RATE_9M, + [ZD_OFDM_RATE_12M] = ZD_CS_OFDM|ZD_OFDM_RATE_12M, + [ZD_OFDM_RATE_18M] = ZD_CS_OFDM|ZD_OFDM_RATE_18M, + [ZD_OFDM_RATE_24M] = ZD_CS_OFDM|ZD_OFDM_RATE_24M, + [ZD_OFDM_RATE_36M] = ZD_CS_OFDM|ZD_OFDM_RATE_36M, + [ZD_OFDM_RATE_48M] = ZD_CS_OFDM|ZD_OFDM_RATE_48M, + [ZD_OFDM_RATE_54M] = ZD_CS_OFDM|ZD_OFDM_RATE_54M, + }; + + ZD_ASSERT(ZD_CS_RATE_MASK == 0x0f); + return typed_rates[cs_rate & ZD_CS_RATE_MASK]; +} + +/* Fallback to lowest rate, if rate is unknown. */ +static u8 rate_to_cs_rate(u8 rate) +{ + switch (rate) { + case IEEE80211_CCK_RATE_2MB: + return ZD_CS_CCK_RATE_2M; + case IEEE80211_CCK_RATE_5MB: + return ZD_CS_CCK_RATE_5_5M; + case IEEE80211_CCK_RATE_11MB: + return ZD_CS_CCK_RATE_11M; + case IEEE80211_OFDM_RATE_6MB: + return ZD_OFDM_RATE_6M; + case IEEE80211_OFDM_RATE_9MB: + return ZD_OFDM_RATE_9M; + case IEEE80211_OFDM_RATE_12MB: + return ZD_OFDM_RATE_12M; + case IEEE80211_OFDM_RATE_18MB: + return ZD_OFDM_RATE_18M; + case IEEE80211_OFDM_RATE_24MB: + return ZD_OFDM_RATE_24M; + case IEEE80211_OFDM_RATE_36MB: + return ZD_OFDM_RATE_36M; + case IEEE80211_OFDM_RATE_48MB: + return ZD_OFDM_RATE_48M; + case IEEE80211_OFDM_RATE_54MB: + return ZD_OFDM_RATE_54M; + } + return ZD_CS_CCK_RATE_1M; +} + +int zd_mac_set_mode(struct zd_mac *mac, u32 mode) +{ + struct ieee80211_device *ieee; + + switch (mode) { + case IW_MODE_AUTO: + case IW_MODE_ADHOC: + case IW_MODE_INFRA: + mac->netdev->type = ARPHRD_ETHER; + break; + case IW_MODE_MONITOR: + mac->netdev->type = ARPHRD_IEEE80211_RADIOTAP; + break; + default: + dev_dbg_f(zd_mac_dev(mac), "wrong mode %u\n", mode); + return -EINVAL; + } + + ieee = zd_mac_to_ieee80211(mac); + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&ieee->lock); + ieee->iw_mode = mode; + spin_unlock_irq(&ieee->lock); + + if (netif_running(mac->netdev)) + return reset_mode(mac); + + return 0; +} + +int zd_mac_get_mode(struct zd_mac *mac, u32 *mode) +{ + unsigned long flags; + struct ieee80211_device *ieee; + + ieee = zd_mac_to_ieee80211(mac); + spin_lock_irqsave(&ieee->lock, flags); + *mode = ieee->iw_mode; + spin_unlock_irqrestore(&ieee->lock, flags); + return 0; +} + +int zd_mac_get_range(struct zd_mac *mac, struct iw_range *range) +{ + int i; + const struct channel_range *channel_range; + u8 regdomain; + + memset(range, 0, sizeof(*range)); + + /* FIXME: Not so important and depends on the mode. For 802.11g + * usually this value is used. It seems to be that Bit/s number is + * given here. + */ + range->throughput = 27 * 1000 * 1000; + + range->max_qual.qual = 100; + range->max_qual.level = 100; + + /* FIXME: Needs still to be tuned. */ + range->avg_qual.qual = 71; + range->avg_qual.level = 80; + + /* FIXME: depends on standard? */ + range->min_rts = 256; + range->max_rts = 2346; + + range->min_frag = MIN_FRAG_THRESHOLD; + range->max_frag = MAX_FRAG_THRESHOLD; + + range->max_encoding_tokens = WEP_KEYS; + range->num_encoding_sizes = 2; + range->encoding_size[0] = 5; + range->encoding_size[1] = WEP_KEY_LEN; + + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 20; + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&mac->lock); + regdomain = mac->regdomain; + spin_unlock_irq(&mac->lock); + channel_range = zd_channel_range(regdomain); + + range->num_channels = channel_range->end - channel_range->start; + range->old_num_channels = range->num_channels; + range->num_frequency = range->num_channels; + range->old_num_frequency = range->num_frequency; + + for (i = 0; i < range->num_frequency; i++) { + struct iw_freq *freq = &range->freq[i]; + freq->i = channel_range->start + i; + zd_channel_to_freq(freq, freq->i); + } + + return 0; +} + +static int zd_calc_tx_length_us(u8 *service, u8 cs_rate, u16 tx_length) +{ + static const u8 rate_divisor[] = { + [ZD_CS_CCK_RATE_1M] = 1, + [ZD_CS_CCK_RATE_2M] = 2, + [ZD_CS_CCK_RATE_5_5M] = 11, /* bits must be doubled */ + [ZD_CS_CCK_RATE_11M] = 11, + [ZD_OFDM_RATE_6M] = 6, + [ZD_OFDM_RATE_9M] = 9, + [ZD_OFDM_RATE_12M] = 12, + [ZD_OFDM_RATE_18M] = 18, + [ZD_OFDM_RATE_24M] = 24, + [ZD_OFDM_RATE_36M] = 36, + [ZD_OFDM_RATE_48M] = 48, + [ZD_OFDM_RATE_54M] = 54, + }; + + u32 bits = (u32)tx_length * 8; + u32 divisor; + + divisor = rate_divisor[cs_rate]; + if (divisor == 0) + return -EINVAL; + + switch (cs_rate) { + case ZD_CS_CCK_RATE_5_5M: + bits = (2*bits) + 10; /* round up to the next integer */ + break; + case ZD_CS_CCK_RATE_11M: + if (service) { + u32 t = bits % 11; + *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION; + if (0 < t && t <= 3) { + *service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION; + } + } + bits += 10; /* round up to the next integer */ + break; + } + + return bits/divisor; +} + +enum { + R2M_SHORT_PREAMBLE = 0x01, + R2M_11A = 0x02, +}; + +static u8 cs_rate_to_modulation(u8 cs_rate, int flags) +{ + u8 modulation; + + modulation = cs_typed_rate(cs_rate); + if (flags & R2M_SHORT_PREAMBLE) { + switch (ZD_CS_RATE(modulation)) { + case ZD_CS_CCK_RATE_2M: + case ZD_CS_CCK_RATE_5_5M: + case ZD_CS_CCK_RATE_11M: + modulation |= ZD_CS_CCK_PREA_SHORT; + return modulation; + } + } + if (flags & R2M_11A) { + if (ZD_CS_TYPE(modulation) == ZD_CS_OFDM) + modulation |= ZD_CS_OFDM_MODE_11A; + } + return modulation; +} + +static void cs_set_modulation(struct zd_mac *mac, struct zd_ctrlset *cs, + struct ieee80211_hdr_4addr *hdr) +{ + struct ieee80211softmac_device *softmac = ieee80211_priv(mac->netdev); + u16 ftype = WLAN_FC_GET_TYPE(le16_to_cpu(hdr->frame_ctl)); + u8 rate, cs_rate; + int is_mgt = (ftype == IEEE80211_FTYPE_MGMT) != 0; + + /* FIXME: 802.11a? short preamble? */ + rate = ieee80211softmac_suggest_txrate(softmac, + is_multicast_ether_addr(hdr->addr1), is_mgt); + + cs_rate = rate_to_cs_rate(rate); + cs->modulation = cs_rate_to_modulation(cs_rate, 0); +} + +static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, + struct ieee80211_hdr_4addr *header) +{ + unsigned int tx_length = le16_to_cpu(cs->tx_length); + u16 fctl = le16_to_cpu(header->frame_ctl); + u16 ftype = WLAN_FC_GET_TYPE(fctl); + u16 stype = WLAN_FC_GET_STYPE(fctl); + + /* + * CONTROL: + * - start at 0x00 + * - if fragment 0, enable bit 0 + * - if backoff needed, enable bit 0 + * - if burst (backoff not needed) disable bit 0 + * - if multicast, enable bit 1 + * - if PS-POLL frame, enable bit 2 + * - if in INDEPENDENT_BSS mode and zd1205_DestPowerSave, then enable + * bit 4 (FIXME: wtf) + * - if frag_len > RTS threshold, set bit 5 as long if it isnt + * multicast or mgt + * - if bit 5 is set, and we are in OFDM mode, unset bit 5 and set bit + * 7 + */ + + cs->control = 0; + + /* First fragment */ + if (WLAN_GET_SEQ_FRAG(le16_to_cpu(header->seq_ctl)) == 0) + cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; + + /* Multicast */ + if (is_multicast_ether_addr(header->addr1)) + cs->control |= ZD_CS_MULTICAST; + + /* PS-POLL */ + if (stype == IEEE80211_STYPE_PSPOLL) + cs->control |= ZD_CS_PS_POLL_FRAME; + + if (!is_multicast_ether_addr(header->addr1) && + ftype != IEEE80211_FTYPE_MGMT && + tx_length > zd_netdev_ieee80211(mac->netdev)->rts) + { + /* FIXME: check the logic */ + if (ZD_CS_TYPE(cs->modulation) == ZD_CS_OFDM) { + /* 802.11g */ + cs->control |= ZD_CS_SELF_CTS; + } else { /* 802.11b */ + cs->control |= ZD_CS_RTS; + } + } + + /* FIXME: Management frame? */ +} + +static int fill_ctrlset(struct zd_mac *mac, + struct ieee80211_txb *txb, + int frag_num) +{ + int r; + struct sk_buff *skb = txb->fragments[frag_num]; + struct ieee80211_hdr_4addr *hdr = + (struct ieee80211_hdr_4addr *) skb->data; + unsigned int frag_len = skb->len + IEEE80211_FCS_LEN; + unsigned int next_frag_len; + unsigned int packet_length; + struct zd_ctrlset *cs = (struct zd_ctrlset *) + skb_push(skb, sizeof(struct zd_ctrlset)); + + if (frag_num+1 < txb->nr_frags) { + next_frag_len = txb->fragments[frag_num+1]->len + + IEEE80211_FCS_LEN; + } else { + next_frag_len = 0; + } + ZD_ASSERT(frag_len <= 0xffff); + ZD_ASSERT(next_frag_len <= 0xffff); + + cs_set_modulation(mac, cs, hdr); + + cs->tx_length = cpu_to_le16(frag_len); + + cs_set_control(mac, cs, hdr); + + packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; + ZD_ASSERT(packet_length <= 0xffff); + /* ZD1211B: Computing the length difference this way, gives us + * flexibility to compute the packet length. + */ + cs->packet_length = cpu_to_le16(mac->chip.is_zd1211b ? + packet_length - frag_len : packet_length); + + /* + * CURRENT LENGTH: + * - transmit frame length in microseconds + * - seems to be derived from frame length + * - see Cal_Us_Service() in zdinlinef.h + * - if macp->bTxBurstEnable is enabled, then multiply by 4 + * - bTxBurstEnable is never set in the vendor driver + * + * SERVICE: + * - "for PLCP configuration" + * - always 0 except in some situations at 802.11b 11M + * - see line 53 of zdinlinef.h + */ + cs->service = 0; + r = zd_calc_tx_length_us(&cs->service, ZD_CS_RATE(cs->modulation), + le16_to_cpu(cs->tx_length)); + if (r < 0) + return r; + cs->current_length = cpu_to_le16(r); + + if (next_frag_len == 0) { + cs->next_frame_length = 0; + } else { + r = zd_calc_tx_length_us(NULL, ZD_CS_RATE(cs->modulation), + next_frag_len); + if (r < 0) + return r; + cs->next_frame_length = cpu_to_le16(r); + } + + return 0; +} + +static int zd_mac_tx(struct zd_mac *mac, struct ieee80211_txb *txb, int pri) +{ + int i, r; + + for (i = 0; i < txb->nr_frags; i++) { + struct sk_buff *skb = txb->fragments[i]; + + r = fill_ctrlset(mac, txb, i); + if (r) + return r; + r = zd_usb_tx(&mac->chip.usb, skb->data, skb->len); + if (r) + return r; + } + + /* FIXME: shouldn't this be handled by the upper layers? */ + mac->netdev->trans_start = jiffies; + + ieee80211_txb_free(txb); + return 0; +} + +struct zd_rt_hdr { + struct ieee80211_radiotap_header rt_hdr; + u8 rt_flags; + u16 rt_channel; + u16 rt_chbitmask; + u16 rt_rate; +}; + +static void fill_rt_header(void *buffer, struct zd_mac *mac, + const struct ieee80211_rx_stats *stats, + const struct rx_status *status) +{ + struct zd_rt_hdr *hdr = buffer; + + hdr->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION; + hdr->rt_hdr.it_pad = 0; + hdr->rt_hdr.it_len = cpu_to_le16(sizeof(struct zd_rt_hdr)); + hdr->rt_hdr.it_present = cpu_to_le32((1 << IEEE80211_RADIOTAP_FLAGS) | + (1 << IEEE80211_RADIOTAP_CHANNEL) | + (1 << IEEE80211_RADIOTAP_RATE)); + + hdr->rt_flags = 0; + if (status->decryption_type & (ZD_RX_WEP64|ZD_RX_WEP128|ZD_RX_WEP256)) + hdr->rt_flags |= IEEE80211_RADIOTAP_F_WEP; + + /* FIXME: 802.11a */ + hdr->rt_channel = cpu_to_le16(ieee80211chan2mhz( + _zd_chip_get_channel(&mac->chip))); + hdr->rt_chbitmask = cpu_to_le16(IEEE80211_CHAN_2GHZ | + ((status->frame_status & ZD_RX_FRAME_MODULATION_MASK) == + ZD_RX_OFDM ? IEEE80211_CHAN_OFDM : IEEE80211_CHAN_CCK)); + + hdr->rt_rate = stats->rate / 5; +} + +/* Returns 1 if the data packet is for us and 0 otherwise. */ +static int is_data_packet_for_us(struct ieee80211_device *ieee, + struct ieee80211_hdr_4addr *hdr) +{ + struct net_device *netdev = ieee->dev; + u16 fc = le16_to_cpu(hdr->frame_ctl); + + ZD_ASSERT(WLAN_FC_GET_TYPE(fc) == IEEE80211_FTYPE_DATA); + + switch (ieee->iw_mode) { + case IW_MODE_ADHOC: + if ((fc & (IEEE80211_FCTL_TODS|IEEE80211_FCTL_FROMDS)) != 0 || + memcmp(hdr->addr3, ieee->bssid, ETH_ALEN) != 0) + return 0; + break; + case IW_MODE_AUTO: + case IW_MODE_INFRA: + if ((fc & (IEEE80211_FCTL_TODS|IEEE80211_FCTL_FROMDS)) != + IEEE80211_FCTL_FROMDS || + memcmp(hdr->addr2, ieee->bssid, ETH_ALEN) != 0) + return 0; + break; + default: + ZD_ASSERT(ieee->iw_mode != IW_MODE_MONITOR); + return 0; + } + + return memcmp(hdr->addr1, netdev->dev_addr, ETH_ALEN) == 0 || + is_multicast_ether_addr(hdr->addr1) || + (netdev->flags & IFF_PROMISC); +} + +/* Filters receiving packets. If it returns 1 send it to ieee80211_rx, if 0 + * return. If an error is detected -EINVAL is returned. ieee80211_rx_mgt() is + * called here. + * + * It has been based on ieee80211_rx_any. + */ +static int filter_rx(struct ieee80211_device *ieee, + const u8 *buffer, unsigned int length, + struct ieee80211_rx_stats *stats) +{ + struct ieee80211_hdr_4addr *hdr; + u16 fc; + + if (ieee->iw_mode == IW_MODE_MONITOR) + return 1; + + hdr = (struct ieee80211_hdr_4addr *)buffer; + fc = le16_to_cpu(hdr->frame_ctl); + if ((fc & IEEE80211_FCTL_VERS) != 0) + return -EINVAL; + + switch (WLAN_FC_GET_TYPE(fc)) { + case IEEE80211_FTYPE_MGMT: + if (length < sizeof(struct ieee80211_hdr_3addr)) + return -EINVAL; + ieee80211_rx_mgt(ieee, hdr, stats); + return 0; + case IEEE80211_FTYPE_CTL: + /* Ignore invalid short buffers */ + return 0; + case IEEE80211_FTYPE_DATA: + if (length < sizeof(struct ieee80211_hdr_3addr)) + return -EINVAL; + return is_data_packet_for_us(ieee, hdr); + } + + return -EINVAL; +} + +static void update_qual_rssi(struct zd_mac *mac, u8 qual_percent, u8 rssi) +{ + unsigned long flags; + + spin_lock_irqsave(&mac->lock, flags); + mac->qual_average = (7 * mac->qual_average + qual_percent) / 8; + mac->rssi_average = (7 * mac->rssi_average + rssi) / 8; + spin_unlock_irqrestore(&mac->lock, flags); +} + +static int fill_rx_stats(struct ieee80211_rx_stats *stats, + const struct rx_status **pstatus, + struct zd_mac *mac, + const u8 *buffer, unsigned int length) +{ + const struct rx_status *status; + + *pstatus = status = zd_tail(buffer, length, sizeof(struct rx_status)); + if (status->frame_status & ZD_RX_ERROR) { + /* FIXME: update? */ + return -EINVAL; + } + memset(stats, 0, sizeof(struct ieee80211_rx_stats)); + stats->len = length - (ZD_PLCP_HEADER_SIZE + IEEE80211_FCS_LEN + + + sizeof(struct rx_status)); + /* FIXME: 802.11a */ + stats->freq = IEEE80211_24GHZ_BAND; + stats->received_channel = _zd_chip_get_channel(&mac->chip); + stats->rssi = zd_rx_strength_percent(status->signal_strength); + stats->signal = zd_rx_qual_percent(buffer, + length - sizeof(struct rx_status), + status); + stats->mask = IEEE80211_STATMASK_RSSI | IEEE80211_STATMASK_SIGNAL; + stats->rate = zd_rx_rate(buffer, status); + if (stats->rate) + stats->mask |= IEEE80211_STATMASK_RATE; + + update_qual_rssi(mac, stats->signal, stats->rssi); + return 0; +} + +int zd_mac_rx(struct zd_mac *mac, const u8 *buffer, unsigned int length) +{ + int r; + struct ieee80211_device *ieee = zd_mac_to_ieee80211(mac); + struct ieee80211_rx_stats stats; + const struct rx_status *status; + struct sk_buff *skb; + + if (length < ZD_PLCP_HEADER_SIZE + IEEE80211_1ADDR_LEN + + IEEE80211_FCS_LEN + sizeof(struct rx_status)) + return -EINVAL; + + r = fill_rx_stats(&stats, &status, mac, buffer, length); + if (r) + return r; + + length -= ZD_PLCP_HEADER_SIZE+IEEE80211_FCS_LEN+ + sizeof(struct rx_status); + buffer += ZD_PLCP_HEADER_SIZE; + + r = filter_rx(ieee, buffer, length, &stats); + if (r <= 0) + return r; + + skb = dev_alloc_skb(sizeof(struct zd_rt_hdr) + length); + if (!skb) + return -ENOMEM; + if (ieee->iw_mode == IW_MODE_MONITOR) + fill_rt_header(skb_put(skb, sizeof(struct zd_rt_hdr)), mac, + &stats, status); + memcpy(skb_put(skb, length), buffer, length); + + r = ieee80211_rx(ieee, skb, &stats); + if (!r) { + ZD_ASSERT(in_irq()); + dev_kfree_skb_irq(skb); + } + return 0; +} + +static int netdev_tx(struct ieee80211_txb *txb, struct net_device *netdev, + int pri) +{ + return zd_mac_tx(zd_netdev_mac(netdev), txb, pri); +} + +static void set_security(struct net_device *netdev, + struct ieee80211_security *sec) +{ + struct ieee80211_device *ieee = zd_netdev_ieee80211(netdev); + struct ieee80211_security *secinfo = &ieee->sec; + int keyidx; + + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), "\n"); + + for (keyidx = 0; keyidx<WEP_KEYS; keyidx++) + if (sec->flags & (1<<keyidx)) { + secinfo->encode_alg[keyidx] = sec->encode_alg[keyidx]; + secinfo->key_sizes[keyidx] = sec->key_sizes[keyidx]; + memcpy(secinfo->keys[keyidx], sec->keys[keyidx], + SCM_KEY_LEN); + } + + if (sec->flags & SEC_ACTIVE_KEY) { + secinfo->active_key = sec->active_key; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .active_key = %d\n", sec->active_key); + } + if (sec->flags & SEC_UNICAST_GROUP) { + secinfo->unicast_uses_group = sec->unicast_uses_group; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .unicast_uses_group = %d\n", + sec->unicast_uses_group); + } + if (sec->flags & SEC_LEVEL) { + secinfo->level = sec->level; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .level = %d\n", sec->level); + } + if (sec->flags & SEC_ENABLED) { + secinfo->enabled = sec->enabled; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .enabled = %d\n", sec->enabled); + } + if (sec->flags & SEC_ENCRYPT) { + secinfo->encrypt = sec->encrypt; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .encrypt = %d\n", sec->encrypt); + } + if (sec->flags & SEC_AUTH_MODE) { + secinfo->auth_mode = sec->auth_mode; + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), + " .auth_mode = %d\n", sec->auth_mode); + } +} + +static void ieee_init(struct ieee80211_device *ieee) +{ + ieee->mode = IEEE_B | IEEE_G; + ieee->freq_band = IEEE80211_24GHZ_BAND; + ieee->modulation = IEEE80211_OFDM_MODULATION | IEEE80211_CCK_MODULATION; + ieee->tx_headroom = sizeof(struct zd_ctrlset); + ieee->set_security = set_security; + ieee->hard_start_xmit = netdev_tx; + + /* Software encryption/decryption for now */ + ieee->host_build_iv = 0; + ieee->host_encrypt = 1; + ieee->host_decrypt = 1; + + /* FIXME: default to managed mode, until ieee80211 and zd1211rw can + * correctly support AUTO */ + ieee->iw_mode = IW_MODE_INFRA; +} + +static void softmac_init(struct ieee80211softmac_device *sm) +{ + sm->set_channel = set_channel; +} + +struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev) +{ + struct zd_mac *mac = zd_netdev_mac(ndev); + struct iw_statistics *iw_stats = &mac->iw_stats; + + memset(iw_stats, 0, sizeof(struct iw_statistics)); + /* We are not setting the status, because ieee->state is not updated + * at all and this driver doesn't track authentication state. + */ + spin_lock_irq(&mac->lock); + iw_stats->qual.qual = mac->qual_average; + iw_stats->qual.level = mac->rssi_average; + iw_stats->qual.updated = IW_QUAL_QUAL_UPDATED|IW_QUAL_LEVEL_UPDATED| + IW_QUAL_NOISE_INVALID; + spin_unlock_irq(&mac->lock); + /* TODO: update counter */ + return iw_stats; +} + +#ifdef DEBUG +static const char* decryption_types[] = { + [ZD_RX_NO_WEP] = "none", + [ZD_RX_WEP64] = "WEP64", + [ZD_RX_TKIP] = "TKIP", + [ZD_RX_AES] = "AES", + [ZD_RX_WEP128] = "WEP128", + [ZD_RX_WEP256] = "WEP256", +}; + +static const char *decryption_type_string(u8 type) +{ + const char *s; + + if (type < ARRAY_SIZE(decryption_types)) { + s = decryption_types[type]; + } else { + s = NULL; + } + return s ? s : "unknown"; +} + +static int is_ofdm(u8 frame_status) +{ + return (frame_status & ZD_RX_OFDM); +} + +void zd_dump_rx_status(const struct rx_status *status) +{ + const char* modulation; + u8 quality; + + if (is_ofdm(status->frame_status)) { + modulation = "ofdm"; + quality = status->signal_quality_ofdm; + } else { + modulation = "cck"; + quality = status->signal_quality_cck; + } + pr_debug("rx status %s strength %#04x qual %#04x decryption %s\n", + modulation, status->signal_strength, quality, + decryption_type_string(status->decryption_type)); + if (status->frame_status & ZD_RX_ERROR) { + pr_debug("rx error %s%s%s%s%s%s\n", + (status->frame_status & ZD_RX_TIMEOUT_ERROR) ? + "timeout " : "", + (status->frame_status & ZD_RX_FIFO_OVERRUN_ERROR) ? + "fifo " : "", + (status->frame_status & ZD_RX_DECRYPTION_ERROR) ? + "decryption " : "", + (status->frame_status & ZD_RX_CRC32_ERROR) ? + "crc32 " : "", + (status->frame_status & ZD_RX_NO_ADDR1_MATCH_ERROR) ? + "addr1 " : "", + (status->frame_status & ZD_RX_CRC16_ERROR) ? + "crc16" : ""); + } +} +#endif /* DEBUG */ diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h new file mode 100644 index 00000000000..71e382c589e --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_mac.h @@ -0,0 +1,190 @@ +/* zd_mac.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_MAC_H +#define _ZD_MAC_H + +#include <linux/wireless.h> +#include <linux/kernel.h> +#include <net/ieee80211.h> +#include <net/ieee80211softmac.h> + +#include "zd_chip.h" +#include "zd_netdev.h" + +struct zd_ctrlset { + u8 modulation; + __le16 tx_length; + u8 control; + /* stores only the difference to tx_length on ZD1211B */ + __le16 packet_length; + __le16 current_length; + u8 service; + __le16 next_frame_length; +} __attribute__((packed)); + +#define ZD_CS_RESERVED_SIZE 25 + +/* zd_crtlset field modulation */ +#define ZD_CS_RATE_MASK 0x0f +#define ZD_CS_TYPE_MASK 0x10 +#define ZD_CS_RATE(modulation) ((modulation) & ZD_CS_RATE_MASK) +#define ZD_CS_TYPE(modulation) ((modulation) & ZD_CS_TYPE_MASK) + +#define ZD_CS_CCK 0x00 +#define ZD_CS_OFDM 0x10 + +#define ZD_CS_CCK_RATE_1M 0x00 +#define ZD_CS_CCK_RATE_2M 0x01 +#define ZD_CS_CCK_RATE_5_5M 0x02 +#define ZD_CS_CCK_RATE_11M 0x03 +/* The rates for OFDM are encoded as in the PLCP header. Use ZD_OFDM_RATE_*. + */ + +/* bit 5 is preamble (when in CCK mode), or a/g selection (when in OFDM mode) */ +#define ZD_CS_CCK_PREA_LONG 0x00 +#define ZD_CS_CCK_PREA_SHORT 0x20 +#define ZD_CS_OFDM_MODE_11G 0x00 +#define ZD_CS_OFDM_MODE_11A 0x20 + +/* zd_ctrlset control field */ +#define ZD_CS_NEED_RANDOM_BACKOFF 0x01 +#define ZD_CS_MULTICAST 0x02 + +#define ZD_CS_FRAME_TYPE_MASK 0x0c +#define ZD_CS_DATA_FRAME 0x00 +#define ZD_CS_PS_POLL_FRAME 0x04 +#define ZD_CS_MANAGEMENT_FRAME 0x08 +#define ZD_CS_NO_SEQUENCE_CTL_FRAME 0x0c + +#define ZD_CS_WAKE_DESTINATION 0x10 +#define ZD_CS_RTS 0x20 +#define ZD_CS_ENCRYPT 0x40 +#define ZD_CS_SELF_CTS 0x80 + +/* Incoming frames are prepended by a PLCP header */ +#define ZD_PLCP_HEADER_SIZE 5 + +struct rx_length_info { + __le16 length[3]; + __le16 tag; +} __attribute__((packed)); + +#define RX_LENGTH_INFO_TAG 0x697e + +struct rx_status { + /* rssi */ + u8 signal_strength; + u8 signal_quality_cck; + u8 signal_quality_ofdm; + u8 decryption_type; + u8 frame_status; +} __attribute__((packed)); + +/* rx_status field decryption_type */ +#define ZD_RX_NO_WEP 0 +#define ZD_RX_WEP64 1 +#define ZD_RX_TKIP 2 +#define ZD_RX_AES 4 +#define ZD_RX_WEP128 5 +#define ZD_RX_WEP256 6 + +/* rx_status field frame_status */ +#define ZD_RX_FRAME_MODULATION_MASK 0x01 +#define ZD_RX_CCK 0x00 +#define ZD_RX_OFDM 0x01 + +#define ZD_RX_TIMEOUT_ERROR 0x02 +#define ZD_RX_FIFO_OVERRUN_ERROR 0x04 +#define ZD_RX_DECRYPTION_ERROR 0x08 +#define ZD_RX_CRC32_ERROR 0x10 +#define ZD_RX_NO_ADDR1_MATCH_ERROR 0x20 +#define ZD_RX_CRC16_ERROR 0x40 +#define ZD_RX_ERROR 0x80 + +enum mac_flags { + MAC_FIXED_CHANNEL = 0x01, +}; + +struct zd_mac { + struct net_device *netdev; + struct zd_chip chip; + spinlock_t lock; + /* Unlocked reading possible */ + struct iw_statistics iw_stats; + u8 qual_average; + u8 rssi_average; + u8 regdomain; + u8 default_regdomain; + u8 requested_channel; +}; + +static inline struct ieee80211_device *zd_mac_to_ieee80211(struct zd_mac *mac) +{ + return zd_netdev_ieee80211(mac->netdev); +} + +static inline struct zd_mac *zd_netdev_mac(struct net_device *netdev) +{ + return ieee80211softmac_priv(netdev); +} + +static inline struct zd_mac *zd_chip_to_mac(struct zd_chip *chip) +{ + return container_of(chip, struct zd_mac, chip); +} + +static inline struct zd_mac *zd_usb_to_mac(struct zd_usb *usb) +{ + return zd_chip_to_mac(zd_usb_to_chip(usb)); +} + +#define zd_mac_dev(mac) (zd_chip_dev(&(mac)->chip)) + +int zd_mac_init(struct zd_mac *mac, + struct net_device *netdev, + struct usb_interface *intf); +void zd_mac_clear(struct zd_mac *mac); + +int zd_mac_init_hw(struct zd_mac *mac, u8 device_type); + +int zd_mac_open(struct net_device *netdev); +int zd_mac_stop(struct net_device *netdev); +int zd_mac_set_mac_address(struct net_device *dev, void *p); + +int zd_mac_rx(struct zd_mac *mac, const u8 *buffer, unsigned int length); + +int zd_mac_set_regdomain(struct zd_mac *zd_mac, u8 regdomain); +u8 zd_mac_get_regdomain(struct zd_mac *zd_mac); + +int zd_mac_request_channel(struct zd_mac *mac, u8 channel); +int zd_mac_get_channel(struct zd_mac *mac, u8 *channel, u8 *flags); + +int zd_mac_set_mode(struct zd_mac *mac, u32 mode); +int zd_mac_get_mode(struct zd_mac *mac, u32 *mode); + +int zd_mac_get_range(struct zd_mac *mac, struct iw_range *range); + +struct iw_statistics *zd_mac_get_wireless_stats(struct net_device *ndev); + +#ifdef DEBUG +void zd_dump_rx_status(const struct rx_status *status); +#else +#define zd_dump_rx_status(status) +#endif /* DEBUG */ + +#endif /* _ZD_MAC_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_netdev.c b/drivers/net/wireless/zd1211rw/zd_netdev.c new file mode 100644 index 00000000000..9df232c2c86 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_netdev.c @@ -0,0 +1,267 @@ +/* zd_netdev.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <net/ieee80211.h> +#include <net/ieee80211softmac.h> +#include <net/ieee80211softmac_wx.h> +#include <net/iw_handler.h> + +#include "zd_def.h" +#include "zd_netdev.h" +#include "zd_mac.h" +#include "zd_ieee80211.h" + +/* Region 0 means reset regdomain to default. */ +static int zd_set_regdomain(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + const u8 *regdomain = (u8 *)req; + return zd_mac_set_regdomain(zd_netdev_mac(netdev), *regdomain); +} + +static int zd_get_regdomain(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + u8 *regdomain = (u8 *)req; + if (!regdomain) + return -EINVAL; + *regdomain = zd_mac_get_regdomain(zd_netdev_mac(netdev)); + return 0; +} + +static const struct iw_priv_args zd_priv_args[] = { + { + .cmd = ZD_PRIV_SET_REGDOMAIN, + .set_args = IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, + .name = "set_regdomain", + }, + { + .cmd = ZD_PRIV_GET_REGDOMAIN, + .get_args = IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, + .name = "get_regdomain", + }, +}; + +#define PRIV_OFFSET(x) [(x)-SIOCIWFIRSTPRIV] + +static const iw_handler zd_priv_handler[] = { + PRIV_OFFSET(ZD_PRIV_SET_REGDOMAIN) = zd_set_regdomain, + PRIV_OFFSET(ZD_PRIV_GET_REGDOMAIN) = zd_get_regdomain, +}; + +static int iw_get_name(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + /* FIXME: check whether 802.11a will also supported, add also + * zd1211B, if we support it. + */ + strlcpy(req->name, "802.11g zd1211", IFNAMSIZ); + return 0; +} + +static int iw_set_freq(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + int r; + struct zd_mac *mac = zd_netdev_mac(netdev); + struct iw_freq *freq = &req->freq; + u8 channel; + + r = zd_find_channel(&channel, freq); + if (r < 0) + return r; + r = zd_mac_request_channel(mac, channel); + return r; +} + +static int iw_get_freq(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + int r; + struct zd_mac *mac = zd_netdev_mac(netdev); + struct iw_freq *freq = &req->freq; + u8 channel; + u8 flags; + + r = zd_mac_get_channel(mac, &channel, &flags); + if (r) + return r; + + freq->flags = (flags & MAC_FIXED_CHANNEL) ? + IW_FREQ_FIXED : IW_FREQ_AUTO; + dev_dbg_f(zd_mac_dev(mac), "channel %s\n", + (flags & MAC_FIXED_CHANNEL) ? "fixed" : "auto"); + return zd_channel_to_freq(freq, channel); +} + +static int iw_set_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + return zd_mac_set_mode(zd_netdev_mac(netdev), req->mode); +} + +static int iw_get_mode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + return zd_mac_get_mode(zd_netdev_mac(netdev), &req->mode); +} + +static int iw_get_range(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *req, char *extra) +{ + struct iw_range *range = (struct iw_range *)extra; + + dev_dbg_f(zd_mac_dev(zd_netdev_mac(netdev)), "\n"); + req->data.length = sizeof(*range); + return zd_mac_get_range(zd_netdev_mac(netdev), range); +} + +static int iw_set_encode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *data, + char *extra) +{ + return ieee80211_wx_set_encode(zd_netdev_ieee80211(netdev), info, + data, extra); +} + +static int iw_get_encode(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *data, + char *extra) +{ + return ieee80211_wx_get_encode(zd_netdev_ieee80211(netdev), info, + data, extra); +} + +static int iw_set_encodeext(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *data, + char *extra) +{ + return ieee80211_wx_set_encodeext(zd_netdev_ieee80211(netdev), info, + data, extra); +} + +static int iw_get_encodeext(struct net_device *netdev, + struct iw_request_info *info, + union iwreq_data *data, + char *extra) +{ + return ieee80211_wx_get_encodeext(zd_netdev_ieee80211(netdev), info, + data, extra); +} + +#define WX(x) [(x)-SIOCIWFIRST] + +static const iw_handler zd_standard_iw_handlers[] = { + WX(SIOCGIWNAME) = iw_get_name, + WX(SIOCSIWFREQ) = iw_set_freq, + WX(SIOCGIWFREQ) = iw_get_freq, + WX(SIOCSIWMODE) = iw_set_mode, + WX(SIOCGIWMODE) = iw_get_mode, + WX(SIOCGIWRANGE) = iw_get_range, + WX(SIOCSIWENCODE) = iw_set_encode, + WX(SIOCGIWENCODE) = iw_get_encode, + WX(SIOCSIWENCODEEXT) = iw_set_encodeext, + WX(SIOCGIWENCODEEXT) = iw_get_encodeext, + WX(SIOCSIWAUTH) = ieee80211_wx_set_auth, + WX(SIOCGIWAUTH) = ieee80211_wx_get_auth, + WX(SIOCSIWSCAN) = ieee80211softmac_wx_trigger_scan, + WX(SIOCGIWSCAN) = ieee80211softmac_wx_get_scan_results, + WX(SIOCSIWESSID) = ieee80211softmac_wx_set_essid, + WX(SIOCGIWESSID) = ieee80211softmac_wx_get_essid, + WX(SIOCSIWAP) = ieee80211softmac_wx_set_wap, + WX(SIOCGIWAP) = ieee80211softmac_wx_get_wap, + WX(SIOCSIWRATE) = ieee80211softmac_wx_set_rate, + WX(SIOCGIWRATE) = ieee80211softmac_wx_get_rate, + WX(SIOCSIWGENIE) = ieee80211softmac_wx_set_genie, + WX(SIOCGIWGENIE) = ieee80211softmac_wx_get_genie, + WX(SIOCSIWMLME) = ieee80211softmac_wx_set_mlme, +}; + +static const struct iw_handler_def iw_handler_def = { + .standard = zd_standard_iw_handlers, + .num_standard = ARRAY_SIZE(zd_standard_iw_handlers), + .private = zd_priv_handler, + .num_private = ARRAY_SIZE(zd_priv_handler), + .private_args = zd_priv_args, + .num_private_args = ARRAY_SIZE(zd_priv_args), + .get_wireless_stats = zd_mac_get_wireless_stats, +}; + +struct net_device *zd_netdev_alloc(struct usb_interface *intf) +{ + int r; + struct net_device *netdev; + struct zd_mac *mac; + + netdev = alloc_ieee80211softmac(sizeof(struct zd_mac)); + if (!netdev) { + dev_dbg_f(&intf->dev, "out of memory\n"); + return NULL; + } + + mac = zd_netdev_mac(netdev); + r = zd_mac_init(mac, netdev, intf); + if (r) { + usb_set_intfdata(intf, NULL); + free_ieee80211(netdev); + return NULL; + } + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &intf->dev); + + dev_dbg_f(&intf->dev, "netdev->flags %#06hx\n", netdev->flags); + dev_dbg_f(&intf->dev, "netdev->features %#010lx\n", netdev->features); + + netdev->open = zd_mac_open; + netdev->stop = zd_mac_stop; + /* netdev->get_stats = */ + /* netdev->set_multicast_list = */ + netdev->set_mac_address = zd_mac_set_mac_address; + netdev->wireless_handlers = &iw_handler_def; + /* netdev->ethtool_ops = */ + + return netdev; +} + +void zd_netdev_free(struct net_device *netdev) +{ + if (!netdev) + return; + + zd_mac_clear(zd_netdev_mac(netdev)); + free_ieee80211(netdev); +} + +void zd_netdev_disconnect(struct net_device *netdev) +{ + unregister_netdev(netdev); +} diff --git a/drivers/net/wireless/zd1211rw/zd_netdev.h b/drivers/net/wireless/zd1211rw/zd_netdev.h new file mode 100644 index 00000000000..374a957073c --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_netdev.h @@ -0,0 +1,45 @@ +/* zd_netdev.h: Header for net device related functions. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_NETDEV_H +#define _ZD_NETDEV_H + +#include <linux/usb.h> +#include <linux/netdevice.h> +#include <net/ieee80211.h> + +#define ZD_PRIV_SET_REGDOMAIN (SIOCIWFIRSTPRIV) +#define ZD_PRIV_GET_REGDOMAIN (SIOCIWFIRSTPRIV+1) + +static inline struct ieee80211_device *zd_netdev_ieee80211( + struct net_device *ndev) +{ + return netdev_priv(ndev); +} + +static inline struct net_device *zd_ieee80211_to_netdev( + struct ieee80211_device *ieee) +{ + return ieee->dev; +} + +struct net_device *zd_netdev_alloc(struct usb_interface *intf); +void zd_netdev_free(struct net_device *netdev); + +void zd_netdev_disconnect(struct net_device *netdev); + +#endif /* _ZD_NETDEV_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_rf.c b/drivers/net/wireless/zd1211rw/zd_rf.c new file mode 100644 index 00000000000..d3770d2c61b --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_rf.c @@ -0,0 +1,151 @@ +/* zd_rf.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/errno.h> +#include <linux/string.h> + +#include "zd_def.h" +#include "zd_rf.h" +#include "zd_ieee80211.h" +#include "zd_chip.h" + +static const char *rfs[] = { + [0] = "unknown RF0", + [1] = "unknown RF1", + [UW2451_RF] = "UW2451_RF", + [UCHIP_RF] = "UCHIP_RF", + [AL2230_RF] = "AL2230_RF", + [AL7230B_RF] = "AL7230B_RF", + [THETA_RF] = "THETA_RF", + [AL2210_RF] = "AL2210_RF", + [MAXIM_NEW_RF] = "MAXIM_NEW_RF", + [UW2453_RF] = "UW2453_RF", + [AL2230S_RF] = "AL2230S_RF", + [RALINK_RF] = "RALINK_RF", + [INTERSIL_RF] = "INTERSIL_RF", + [RF2959_RF] = "RF2959_RF", + [MAXIM_NEW2_RF] = "MAXIM_NEW2_RF", + [PHILIPS_RF] = "PHILIPS_RF", +}; + +const char *zd_rf_name(u8 type) +{ + if (type & 0xf0) + type = 0; + return rfs[type]; +} + +void zd_rf_init(struct zd_rf *rf) +{ + memset(rf, 0, sizeof(*rf)); +} + +void zd_rf_clear(struct zd_rf *rf) +{ + memset(rf, 0, sizeof(*rf)); +} + +int zd_rf_init_hw(struct zd_rf *rf, u8 type) +{ + int r, t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + switch (type) { + case RF2959_RF: + r = zd_rf_init_rf2959(rf); + if (r) + return r; + break; + case AL2230_RF: + r = zd_rf_init_al2230(rf); + if (r) + return r; + break; + default: + dev_err(zd_chip_dev(chip), + "RF %s %#x is not supported\n", zd_rf_name(type), type); + rf->type = 0; + return -ENODEV; + } + + rf->type = type; + + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->init_hw(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} + +int zd_rf_scnprint_id(struct zd_rf *rf, char *buffer, size_t size) +{ + return scnprintf(buffer, size, "%s", zd_rf_name(rf->type)); +} + +int zd_rf_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + + ZD_ASSERT(mutex_is_locked(&zd_rf_to_chip(rf)->mutex)); + if (channel < MIN_CHANNEL24) + return -EINVAL; + if (channel > MAX_CHANNEL24) + return -EINVAL; + dev_dbg_f(zd_chip_dev(zd_rf_to_chip(rf)), "channel: %d\n", channel); + + r = rf->set_channel(rf, channel); + if (r >= 0) + rf->channel = channel; + return r; +} + +int zd_switch_radio_on(struct zd_rf *rf) +{ + int r, t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->switch_radio_on(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} + +int zd_switch_radio_off(struct zd_rf *rf) +{ + int r, t; + struct zd_chip *chip = zd_rf_to_chip(rf); + + /* TODO: move phy regs handling to zd_chip */ + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_chip_lock_phy_regs(chip); + if (r) + return r; + t = rf->switch_radio_off(rf); + r = zd_chip_unlock_phy_regs(chip); + if (t) + r = t; + return r; +} diff --git a/drivers/net/wireless/zd1211rw/zd_rf.h b/drivers/net/wireless/zd1211rw/zd_rf.h new file mode 100644 index 00000000000..ea30f693fcc --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_rf.h @@ -0,0 +1,82 @@ +/* zd_rf.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_RF_H +#define _ZD_RF_H + +#include "zd_types.h" + +#define UW2451_RF 0x2 +#define UCHIP_RF 0x3 +#define AL2230_RF 0x4 +#define AL7230B_RF 0x5 /* a,b,g */ +#define THETA_RF 0x6 +#define AL2210_RF 0x7 +#define MAXIM_NEW_RF 0x8 +#define UW2453_RF 0x9 +#define AL2230S_RF 0xa +#define RALINK_RF 0xb +#define INTERSIL_RF 0xc +#define RF2959_RF 0xd +#define MAXIM_NEW2_RF 0xe +#define PHILIPS_RF 0xf + +#define RF_CHANNEL(ch) [(ch)-1] + +/* Provides functions of the RF transceiver. */ + +enum { + RF_REG_BITS = 6, + RF_VALUE_BITS = 18, + RF_RV_BITS = RF_REG_BITS + RF_VALUE_BITS, +}; + +struct zd_rf { + u8 type; + + u8 channel; + /* + * Whether this RF should patch the 6M band edge + * (assuming E2P_POD agrees) + */ + u8 patch_6m_band_edge:1; + + /* RF-specific functions */ + int (*init_hw)(struct zd_rf *rf); + int (*set_channel)(struct zd_rf *rf, u8 channel); + int (*switch_radio_on)(struct zd_rf *rf); + int (*switch_radio_off)(struct zd_rf *rf); +}; + +const char *zd_rf_name(u8 type); +void zd_rf_init(struct zd_rf *rf); +void zd_rf_clear(struct zd_rf *rf); +int zd_rf_init_hw(struct zd_rf *rf, u8 type); + +int zd_rf_scnprint_id(struct zd_rf *rf, char *buffer, size_t size); + +int zd_rf_set_channel(struct zd_rf *rf, u8 channel); + +int zd_switch_radio_on(struct zd_rf *rf); +int zd_switch_radio_off(struct zd_rf *rf); + +/* Functions for individual RF chips */ + +int zd_rf_init_rf2959(struct zd_rf *rf); +int zd_rf_init_al2230(struct zd_rf *rf); + +#endif /* _ZD_RF_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c new file mode 100644 index 00000000000..0948b25f660 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c @@ -0,0 +1,308 @@ +/* zd_rf_al2230.c: Functions for the AL2230 RF controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> + +#include "zd_rf.h" +#include "zd_usb.h" +#include "zd_chip.h" + +static const u32 al2230_table[][3] = { + RF_CHANNEL( 1) = { 0x03f790, 0x033331, 0x00000d, }, + RF_CHANNEL( 2) = { 0x03f790, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 3) = { 0x03e790, 0x033331, 0x00000d, }, + RF_CHANNEL( 4) = { 0x03e790, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 5) = { 0x03f7a0, 0x033331, 0x00000d, }, + RF_CHANNEL( 6) = { 0x03f7a0, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 7) = { 0x03e7a0, 0x033331, 0x00000d, }, + RF_CHANNEL( 8) = { 0x03e7a0, 0x0b3331, 0x00000d, }, + RF_CHANNEL( 9) = { 0x03f7b0, 0x033331, 0x00000d, }, + RF_CHANNEL(10) = { 0x03f7b0, 0x0b3331, 0x00000d, }, + RF_CHANNEL(11) = { 0x03e7b0, 0x033331, 0x00000d, }, + RF_CHANNEL(12) = { 0x03e7b0, 0x0b3331, 0x00000d, }, + RF_CHANNEL(13) = { 0x03f7c0, 0x033331, 0x00000d, }, + RF_CHANNEL(14) = { 0x03e7c0, 0x066661, 0x00000d, }, +}; + +static int zd1211_al2230_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs[] = { + { CR15, 0x20 }, { CR23, 0x40 }, { CR24, 0x20 }, + { CR26, 0x11 }, { CR28, 0x3e }, { CR29, 0x00 }, + { CR44, 0x33 }, { CR106, 0x2a }, { CR107, 0x1a }, + { CR109, 0x09 }, { CR110, 0x27 }, { CR111, 0x2b }, + { CR112, 0x2b }, { CR119, 0x0a }, { CR10, 0x89 }, + /* for newest (3rd cut) AL2300 */ + { CR17, 0x28 }, + { CR26, 0x93 }, { CR34, 0x30 }, + /* for newest (3rd cut) AL2300 */ + { CR35, 0x3e }, + { CR41, 0x24 }, { CR44, 0x32 }, + /* for newest (3rd cut) AL2300 */ + { CR46, 0x96 }, + { CR47, 0x1e }, { CR79, 0x58 }, { CR80, 0x30 }, + { CR81, 0x30 }, { CR87, 0x0a }, { CR89, 0x04 }, + { CR92, 0x0a }, { CR99, 0x28 }, { CR100, 0x00 }, + { CR101, 0x13 }, { CR102, 0x27 }, { CR106, 0x24 }, + { CR107, 0x2a }, { CR109, 0x09 }, { CR110, 0x13 }, + { CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 }, + { CR114, 0x27 }, + /* for newest (3rd cut) AL2300 */ + { CR115, 0x24 }, + { CR116, 0x24 }, { CR117, 0xf4 }, { CR118, 0xfc }, + { CR119, 0x10 }, { CR120, 0x4f }, { CR121, 0x77 }, + { CR122, 0xe0 }, { CR137, 0x88 }, { CR252, 0xff }, + { CR253, 0xff }, + + /* These following happen separately in the vendor driver */ + { }, + + /* shdnb(PLL_ON)=0 */ + { CR251, 0x2f }, + /* shdnb(PLL_ON)=1 */ + { CR251, 0x3f }, + { CR138, 0x28 }, { CR203, 0x06 }, + }; + + static const u32 rv[] = { + /* Channel 1 */ + 0x03f790, + 0x033331, + 0x00000d, + + 0x0b3331, + 0x03b812, + 0x00fff3, + 0x000da4, + 0x0f4dc5, /* fix freq shift, 0x04edc5 */ + 0x0805b6, + 0x011687, + 0x000688, + 0x0403b9, /* external control TX power (CR31) */ + 0x00dbba, + 0x00099b, + 0x0bdffc, + 0x00000d, + 0x00500f, + + /* These writes happen separately in the vendor driver */ + 0x00d00f, + 0x004c0f, + 0x00540f, + 0x00700f, + 0x00500f, + }; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + r = zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS); + if (r) + return r; + + return 0; +} + +static int zd1211b_al2230_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs1[] = { + { CR10, 0x89 }, { CR15, 0x20 }, + { CR17, 0x2B }, /* for newest(3rd cut) AL2230 */ + { CR23, 0x40 }, { CR24, 0x20 }, { CR26, 0x93 }, + { CR28, 0x3e }, { CR29, 0x00 }, + { CR33, 0x28 }, /* 5621 */ + { CR34, 0x30 }, + { CR35, 0x3e }, /* for newest(3rd cut) AL2230 */ + { CR41, 0x24 }, { CR44, 0x32 }, + { CR46, 0x99 }, /* for newest(3rd cut) AL2230 */ + { CR47, 0x1e }, + + /* ZD1211B 05.06.10 */ + { CR48, 0x00 }, { CR49, 0x00 }, { CR51, 0x01 }, + { CR52, 0x80 }, { CR53, 0x7e }, { CR65, 0x00 }, + { CR66, 0x00 }, { CR67, 0x00 }, { CR68, 0x00 }, + { CR69, 0x28 }, + + { CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 }, + { CR87, 0x0a }, { CR89, 0x04 }, + { CR91, 0x00 }, /* 5621 */ + { CR92, 0x0a }, + { CR98, 0x8d }, /* 4804, for 1212 new algorithm */ + { CR99, 0x00 }, /* 5621 */ + { CR101, 0x13 }, { CR102, 0x27 }, + { CR106, 0x24 }, /* for newest(3rd cut) AL2230 */ + { CR107, 0x2a }, + { CR109, 0x13 }, /* 4804, for 1212 new algorithm */ + { CR110, 0x1f }, /* 4804, for 1212 new algorithm */ + { CR111, 0x1f }, { CR112, 0x1f }, { CR113, 0x27 }, + { CR114, 0x27 }, + { CR115, 0x26 }, /* 24->26 at 4902 for newest(3rd cut) AL2230 */ + { CR116, 0x24 }, + { CR117, 0xfa }, /* for 1211b */ + { CR118, 0xfa }, /* for 1211b */ + { CR119, 0x10 }, + { CR120, 0x4f }, + { CR121, 0x6c }, /* for 1211b */ + { CR122, 0xfc }, /* E0->FC at 4902 */ + { CR123, 0x57 }, /* 5623 */ + { CR125, 0xad }, /* 4804, for 1212 new algorithm */ + { CR126, 0x6c }, /* 5614 */ + { CR127, 0x03 }, /* 4804, for 1212 new algorithm */ + { CR137, 0x50 }, /* 5614 */ + { CR138, 0xa8 }, + { CR144, 0xac }, /* 5621 */ + { CR150, 0x0d }, { CR252, 0x00 }, { CR253, 0x00 }, + }; + + static const u32 rv1[] = { + /* channel 1 */ + 0x03f790, + 0x033331, + 0x00000d, + + 0x0b3331, + 0x03b812, + 0x00fff3, + 0x0005a4, + 0x0f4dc5, /* fix freq shift 0x044dc5 */ + 0x0805b6, + 0x0146c7, + 0x000688, + 0x0403b9, /* External control TX power (CR31) */ + 0x00dbba, + 0x00099b, + 0x0bdffc, + 0x00000d, + 0x00580f, + }; + + static const struct zd_ioreq16 ioreqs2[] = { + { CR47, 0x1e }, { CR_RFCFG, 0x03 }, + }; + + static const u32 rv2[] = { + 0x00880f, + 0x00080f, + }; + + static const struct zd_ioreq16 ioreqs3[] = { + { CR_RFCFG, 0x00 }, { CR47, 0x1e }, { CR251, 0x7f }, + }; + + static const u32 rv3[] = { + 0x00d80f, + 0x00780f, + 0x00580f, + }; + + static const struct zd_ioreq16 ioreqs4[] = { + { CR138, 0x28 }, { CR203, 0x06 }, + }; + + r = zd_iowrite16a_locked(chip, ioreqs1, ARRAY_SIZE(ioreqs1)); + if (r) + return r; + r = zd_rfwritev_locked(chip, rv1, ARRAY_SIZE(rv1), RF_RV_BITS); + if (r) + return r; + r = zd_iowrite16a_locked(chip, ioreqs2, ARRAY_SIZE(ioreqs2)); + if (r) + return r; + r = zd_rfwritev_locked(chip, rv2, ARRAY_SIZE(rv2), RF_RV_BITS); + if (r) + return r; + r = zd_iowrite16a_locked(chip, ioreqs3, ARRAY_SIZE(ioreqs3)); + if (r) + return r; + r = zd_rfwritev_locked(chip, rv3, ARRAY_SIZE(rv3), RF_RV_BITS); + if (r) + return r; + return zd_iowrite16a_locked(chip, ioreqs4, ARRAY_SIZE(ioreqs4)); +} + +static int al2230_set_channel(struct zd_rf *rf, u8 channel) +{ + int r; + const u32 *rv = al2230_table[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { CR138, 0x28 }, + { CR203, 0x06 }, + }; + + r = zd_rfwritev_locked(chip, rv, 3, RF_RV_BITS); + if (r) + return r; + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211_al2230_switch_radio_on(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { CR11, 0x00 }, + { CR251, 0x3f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int zd1211b_al2230_switch_radio_on(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { CR11, 0x00 }, + { CR251, 0x7f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int al2230_switch_radio_off(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + static const struct zd_ioreq16 ioreqs[] = { + { CR11, 0x04 }, + { CR251, 0x2f }, + }; + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +int zd_rf_init_al2230(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + + rf->set_channel = al2230_set_channel; + rf->switch_radio_off = al2230_switch_radio_off; + if (chip->is_zd1211b) { + rf->init_hw = zd1211b_al2230_init_hw; + rf->switch_radio_on = zd1211b_al2230_switch_radio_on; + } else { + rf->init_hw = zd1211_al2230_init_hw; + rf->switch_radio_on = zd1211_al2230_switch_radio_on; + } + rf->patch_6m_band_edge = 1; + return 0; +} diff --git a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c new file mode 100644 index 00000000000..58247271cc2 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c @@ -0,0 +1,279 @@ +/* zd_rf_rfmd.c: Functions for the RFMD RF controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> + +#include "zd_rf.h" +#include "zd_usb.h" +#include "zd_chip.h" + +static u32 rf2959_table[][2] = { + RF_CHANNEL( 1) = { 0x181979, 0x1e6666 }, + RF_CHANNEL( 2) = { 0x181989, 0x1e6666 }, + RF_CHANNEL( 3) = { 0x181999, 0x1e6666 }, + RF_CHANNEL( 4) = { 0x1819a9, 0x1e6666 }, + RF_CHANNEL( 5) = { 0x1819b9, 0x1e6666 }, + RF_CHANNEL( 6) = { 0x1819c9, 0x1e6666 }, + RF_CHANNEL( 7) = { 0x1819d9, 0x1e6666 }, + RF_CHANNEL( 8) = { 0x1819e9, 0x1e6666 }, + RF_CHANNEL( 9) = { 0x1819f9, 0x1e6666 }, + RF_CHANNEL(10) = { 0x181a09, 0x1e6666 }, + RF_CHANNEL(11) = { 0x181a19, 0x1e6666 }, + RF_CHANNEL(12) = { 0x181a29, 0x1e6666 }, + RF_CHANNEL(13) = { 0x181a39, 0x1e6666 }, + RF_CHANNEL(14) = { 0x181a60, 0x1c0000 }, +}; + +#if 0 +static int bits(u32 rw, int from, int to) +{ + rw &= ~(0xffffffffU << (to+1)); + rw >>= from; + return rw; +} + +static int bit(u32 rw, int bit) +{ + return bits(rw, bit, bit); +} + +static void dump_regwrite(u32 rw) +{ + int reg = bits(rw, 18, 22); + int rw_flag = bits(rw, 23, 23); + PDEBUG("rf2959 %#010x reg %d rw %d", rw, reg, rw_flag); + + switch (reg) { + case 0: + PDEBUG("reg0 CFG1 ref_sel %d hybernate %d rf_vco_reg_en %d" + " if_vco_reg_en %d if_vga_en %d", + bits(rw, 14, 15), bit(rw, 3), bit(rw, 2), bit(rw, 1), + bit(rw, 0)); + break; + case 1: + PDEBUG("reg1 IFPLL1 pll_en1 %d kv_en1 %d vtc_en1 %d lpf1 %d" + " cpl1 %d pdp1 %d autocal_en1 %d ld_en1 %d ifloopr %d" + " ifloopc %d dac1 %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14), + bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10), + bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0, 3)); + break; + case 2: + PDEBUG("reg2 IFPLL2 n1 %d num1 %d", + bits(rw, 6, 17), bits(rw, 0, 5)); + break; + case 3: + PDEBUG("reg3 IFPLL3 num %d", bits(rw, 0, 17)); + break; + case 4: + PDEBUG("reg4 IFPLL4 dn1 %#04x ct_def1 %d kv_def1 %d", + bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3)); + break; + case 5: + PDEBUG("reg5 RFPLL1 pll_en %d kv_en %d vtc_en %d lpf %d cpl %d" + " pdp %d autocal_en %d ld_en %d rfloopr %d rfloopc %d" + " dac %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), bit(rw, 14), + bit(rw, 13), bit(rw, 12), bit(rw, 11), bit(rw, 10), + bits(rw, 7, 9), bits(rw, 4, 6), bits(rw, 0,3)); + break; + case 6: + PDEBUG("reg6 RFPLL2 n %d num %d", + bits(rw, 6, 17), bits(rw, 0, 5)); + break; + case 7: + PDEBUG("reg7 RFPLL3 num2 %d", bits(rw, 0, 17)); + break; + case 8: + PDEBUG("reg8 RFPLL4 dn %#06x ct_def %d kv_def %d", + bits(rw, 8, 16), bits(rw, 4, 7), bits(rw, 0, 3)); + break; + case 9: + PDEBUG("reg9 CAL1 tvco %d tlock %d m_ct_value %d ld_window %d", + bits(rw, 13, 17), bits(rw, 8, 12), bits(rw, 3, 7), + bits(rw, 0, 2)); + break; + case 10: + PDEBUG("reg10 TXRX1 rxdcfbbyps %d pcontrol %d txvgc %d" + " rxlpfbw %d txlpfbw %d txdiffmode %d txenmode %d" + " intbiasen %d tybypass %d", + bit(rw, 17), bits(rw, 15, 16), bits(rw, 10, 14), + bits(rw, 7, 9), bits(rw, 4, 6), bit(rw, 3), bit(rw, 2), + bit(rw, 1), bit(rw, 0)); + break; + case 11: + PDEBUG("reg11 PCNT1 mid_bias %d p_desired %d pc_offset %d" + " tx_delay %d", + bits(rw, 15, 17), bits(rw, 9, 14), bits(rw, 3, 8), + bits(rw, 0, 2)); + break; + case 12: + PDEBUG("reg12 PCNT2 max_power %d mid_power %d min_power %d", + bits(rw, 12, 17), bits(rw, 6, 11), bits(rw, 0, 5)); + break; + case 13: + PDEBUG("reg13 VCOT1 rfpll vco comp %d ifpll vco comp %d" + " lobias %d if_biasbuf %d if_biasvco %d rf_biasbuf %d" + " rf_biasvco %d", + bit(rw, 17), bit(rw, 16), bit(rw, 15), + bits(rw, 8, 9), bits(rw, 5, 7), bits(rw, 3, 4), + bits(rw, 0, 2)); + break; + case 14: + PDEBUG("reg14 IQCAL rx_acal %d rx_pcal %d" + " tx_acal %d tx_pcal %d", + bits(rw, 13, 17), bits(rw, 9, 12), bits(rw, 4, 8), + bits(rw, 0, 3)); + break; + } +} +#endif /* 0 */ + +static int rf2959_init_hw(struct zd_rf *rf) +{ + int r; + struct zd_chip *chip = zd_rf_to_chip(rf); + + static const struct zd_ioreq16 ioreqs[] = { + { CR2, 0x1E }, { CR9, 0x20 }, { CR10, 0x89 }, + { CR11, 0x00 }, { CR15, 0xD0 }, { CR17, 0x68 }, + { CR19, 0x4a }, { CR20, 0x0c }, { CR21, 0x0E }, + { CR23, 0x48 }, + /* normal size for cca threshold */ + { CR24, 0x14 }, + /* { CR24, 0x20 }, */ + { CR26, 0x90 }, { CR27, 0x30 }, { CR29, 0x20 }, + { CR31, 0xb2 }, { CR32, 0x43 }, { CR33, 0x28 }, + { CR38, 0x30 }, { CR34, 0x0f }, { CR35, 0xF0 }, + { CR41, 0x2a }, { CR46, 0x7F }, { CR47, 0x1E }, + { CR51, 0xc5 }, { CR52, 0xc5 }, { CR53, 0xc5 }, + { CR79, 0x58 }, { CR80, 0x30 }, { CR81, 0x30 }, + { CR82, 0x00 }, { CR83, 0x24 }, { CR84, 0x04 }, + { CR85, 0x00 }, { CR86, 0x10 }, { CR87, 0x2A }, + { CR88, 0x10 }, { CR89, 0x24 }, { CR90, 0x18 }, + /* { CR91, 0x18 }, */ + /* should solve continous CTS frame problems */ + { CR91, 0x00 }, + { CR92, 0x0a }, { CR93, 0x00 }, { CR94, 0x01 }, + { CR95, 0x00 }, { CR96, 0x40 }, { CR97, 0x37 }, + { CR98, 0x05 }, { CR99, 0x28 }, { CR100, 0x00 }, + { CR101, 0x13 }, { CR102, 0x27 }, { CR103, 0x27 }, + { CR104, 0x18 }, { CR105, 0x12 }, + /* normal size */ + { CR106, 0x1a }, + /* { CR106, 0x22 }, */ + { CR107, 0x24 }, { CR108, 0x0a }, { CR109, 0x13 }, + { CR110, 0x2F }, { CR111, 0x27 }, { CR112, 0x27 }, + { CR113, 0x27 }, { CR114, 0x27 }, { CR115, 0x40 }, + { CR116, 0x40 }, { CR117, 0xF0 }, { CR118, 0xF0 }, + { CR119, 0x16 }, + /* no TX continuation */ + { CR122, 0x00 }, + /* { CR122, 0xff }, */ + { CR127, 0x03 }, { CR131, 0x08 }, { CR138, 0x28 }, + { CR148, 0x44 }, { CR150, 0x10 }, { CR169, 0xBB }, + { CR170, 0xBB }, + }; + + static const u32 rv[] = { + 0x000007, /* REG0(CFG1) */ + 0x07dd43, /* REG1(IFPLL1) */ + 0x080959, /* REG2(IFPLL2) */ + 0x0e6666, + 0x116a57, /* REG4 */ + 0x17dd43, /* REG5 */ + 0x1819f9, /* REG6 */ + 0x1e6666, + 0x214554, + 0x25e7fa, + 0x27fffa, + /* The Zydas driver somehow forgets to set this value. It's + * only set for Japan. We are using internal power control + * for now. + */ + 0x294128, /* internal power */ + /* 0x28252c, */ /* External control TX power */ + /* CR31_CCK, CR51_6-36M, CR52_48M, CR53_54M */ + 0x2c0000, + 0x300000, + 0x340000, /* REG13(0xD) */ + 0x381e0f, /* REG14(0xE) */ + /* Bogus, RF2959's data sheet doesn't know register 27, which is + * actually referenced here. The commented 0x11 is 17. + */ + 0x6c180f, /* REG27(0x11) */ + }; + + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) + return r; + + return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS); +} + +static int rf2959_set_channel(struct zd_rf *rf, u8 channel) +{ + int i, r; + u32 *rv = rf2959_table[channel-1]; + struct zd_chip *chip = zd_rf_to_chip(rf); + + for (i = 0; i < 2; i++) { + r = zd_rfwrite_locked(chip, rv[i], RF_RV_BITS); + if (r) + return r; + } + return 0; +} + +static int rf2959_switch_radio_on(struct zd_rf *rf) +{ + static const struct zd_ioreq16 ioreqs[] = { + { CR10, 0x89 }, + { CR11, 0x00 }, + }; + struct zd_chip *chip = zd_rf_to_chip(rf); + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +static int rf2959_switch_radio_off(struct zd_rf *rf) +{ + static const struct zd_ioreq16 ioreqs[] = { + { CR10, 0x15 }, + { CR11, 0x81 }, + }; + struct zd_chip *chip = zd_rf_to_chip(rf); + + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); +} + +int zd_rf_init_rf2959(struct zd_rf *rf) +{ + struct zd_chip *chip = zd_rf_to_chip(rf); + + if (chip->is_zd1211b) { + dev_err(zd_chip_dev(chip), + "RF2959 is currently not supported for ZD1211B" + " devices\n"); + return -ENODEV; + } + rf->init_hw = rf2959_init_hw; + rf->set_channel = rf2959_set_channel; + rf->switch_radio_on = rf2959_switch_radio_on; + rf->switch_radio_off = rf2959_switch_radio_off; + return 0; +} diff --git a/drivers/net/wireless/zd1211rw/zd_types.h b/drivers/net/wireless/zd1211rw/zd_types.h new file mode 100644 index 00000000000..0155a1584ed --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_types.h @@ -0,0 +1,71 @@ +/* zd_types.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_TYPES_H +#define _ZD_TYPES_H + +#include <linux/types.h> + +/* We have three register spaces mapped into the overall USB address space of + * 64K words (16-bit values). There is the control register space of + * double-word registers, the eeprom register space and the firmware register + * space. The control register space is byte mapped, the others are word + * mapped. + * + * For that reason, we are using byte offsets for control registers and word + * offsets for everything else. + */ + +typedef u32 __nocast zd_addr_t; + +enum { + ADDR_BASE_MASK = 0xff000000, + ADDR_OFFSET_MASK = 0x0000ffff, + ADDR_ZERO_MASK = 0x00ff0000, + NULL_BASE = 0x00000000, + USB_BASE = 0x01000000, + CR_BASE = 0x02000000, + CR_MAX_OFFSET = 0x0b30, + E2P_BASE = 0x03000000, + E2P_MAX_OFFSET = 0x007e, + FW_BASE = 0x04000000, + FW_MAX_OFFSET = 0x0005, +}; + +#define ZD_ADDR_BASE(addr) ((u32)(addr) & ADDR_BASE_MASK) +#define ZD_OFFSET(addr) ((u32)(addr) & ADDR_OFFSET_MASK) + +#define ZD_ADDR(base, offset) \ + ((zd_addr_t)(((base) & ADDR_BASE_MASK) | ((offset) & ADDR_OFFSET_MASK))) + +#define ZD_NULL_ADDR ((zd_addr_t)0) +#define USB_REG(offset) ZD_ADDR(USB_BASE, offset) /* word addressing */ +#define CTL_REG(offset) ZD_ADDR(CR_BASE, offset) /* byte addressing */ +#define E2P_REG(offset) ZD_ADDR(E2P_BASE, offset) /* word addressing */ +#define FW_REG(offset) ZD_ADDR(FW_BASE, offset) /* word addressing */ + +static inline zd_addr_t zd_inc_word(zd_addr_t addr) +{ + u32 base = ZD_ADDR_BASE(addr); + u32 offset = ZD_OFFSET(addr); + + offset += base == CR_BASE ? 2 : 1; + + return base | offset; +} + +#endif /* _ZD_TYPES_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c new file mode 100644 index 00000000000..ce1cb2c6aa8 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -0,0 +1,1316 @@ +/* zd_usb.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <asm/unaligned.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/skbuff.h> +#include <linux/usb.h> +#include <net/ieee80211.h> + +#include "zd_def.h" +#include "zd_netdev.h" +#include "zd_mac.h" +#include "zd_usb.h" +#include "zd_util.h" + +static struct usb_device_id usb_ids[] = { + /* ZD1211 */ + { USB_DEVICE(0x0ace, 0x1211), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x07b8, 0x6001), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x126f, 0xa006), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x6891, 0xa727), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x0df6, 0x9071), .driver_info = DEVICE_ZD1211 }, + { USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 }, + /* ZD1211B */ + { USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B }, + {} +}; + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("USB driver for devices with the ZD1211 chip."); +MODULE_AUTHOR("Ulrich Kunitz"); +MODULE_AUTHOR("Daniel Drake"); +MODULE_VERSION("1.0"); +MODULE_DEVICE_TABLE(usb, usb_ids); + +#define FW_ZD1211_PREFIX "zd1211/zd1211_" +#define FW_ZD1211B_PREFIX "zd1211/zd1211b_" + +/* register address handling */ + +#ifdef DEBUG +static int check_addr(struct zd_usb *usb, zd_addr_t addr) +{ + u32 base = ZD_ADDR_BASE(addr); + u32 offset = ZD_OFFSET(addr); + + if ((u32)addr & ADDR_ZERO_MASK) + goto invalid_address; + switch (base) { + case USB_BASE: + break; + case CR_BASE: + if (offset > CR_MAX_OFFSET) { + dev_dbg(zd_usb_dev(usb), + "CR offset %#010x larger than" + " CR_MAX_OFFSET %#10x\n", + offset, CR_MAX_OFFSET); + goto invalid_address; + } + if (offset & 1) { + dev_dbg(zd_usb_dev(usb), + "CR offset %#010x is not a multiple of 2\n", + offset); + goto invalid_address; + } + break; + case E2P_BASE: + if (offset > E2P_MAX_OFFSET) { + dev_dbg(zd_usb_dev(usb), + "E2P offset %#010x larger than" + " E2P_MAX_OFFSET %#010x\n", + offset, E2P_MAX_OFFSET); + goto invalid_address; + } + break; + case FW_BASE: + if (!usb->fw_base_offset) { + dev_dbg(zd_usb_dev(usb), + "ERROR: fw base offset has not been set\n"); + return -EAGAIN; + } + if (offset > FW_MAX_OFFSET) { + dev_dbg(zd_usb_dev(usb), + "FW offset %#10x is larger than" + " FW_MAX_OFFSET %#010x\n", + offset, FW_MAX_OFFSET); + goto invalid_address; + } + break; + default: + dev_dbg(zd_usb_dev(usb), + "address has unsupported base %#010x\n", addr); + goto invalid_address; + } + + return 0; +invalid_address: + dev_dbg(zd_usb_dev(usb), + "ERROR: invalid address: %#010x\n", addr); + return -EINVAL; +} +#endif /* DEBUG */ + +static u16 usb_addr(struct zd_usb *usb, zd_addr_t addr) +{ + u32 base; + u16 offset; + + base = ZD_ADDR_BASE(addr); + offset = ZD_OFFSET(addr); + + ZD_ASSERT(check_addr(usb, addr) == 0); + + switch (base) { + case CR_BASE: + offset += CR_BASE_OFFSET; + break; + case E2P_BASE: + offset += E2P_BASE_OFFSET; + break; + case FW_BASE: + offset += usb->fw_base_offset; + break; + } + + return offset; +} + +/* USB device initialization */ + +static int request_fw_file( + const struct firmware **fw, const char *name, struct device *device) +{ + int r; + + dev_dbg_f(device, "fw name %s\n", name); + + r = request_firmware(fw, name, device); + if (r) + dev_err(device, + "Could not load firmware file %s. Error number %d\n", + name, r); + return r; +} + +static inline u16 get_bcdDevice(const struct usb_device *udev) +{ + return le16_to_cpu(udev->descriptor.bcdDevice); +} + +enum upload_code_flags { + REBOOT = 1, +}; + +/* Ensures that MAX_TRANSFER_SIZE is even. */ +#define MAX_TRANSFER_SIZE (USB_MAX_TRANSFER_SIZE & ~1) + +static int upload_code(struct usb_device *udev, + const u8 *data, size_t size, u16 code_offset, int flags) +{ + u8 *p; + int r; + + /* USB request blocks need "kmalloced" buffers. + */ + p = kmalloc(MAX_TRANSFER_SIZE, GFP_KERNEL); + if (!p) { + dev_err(&udev->dev, "out of memory\n"); + r = -ENOMEM; + goto error; + } + + size &= ~1; + while (size > 0) { + size_t transfer_size = size <= MAX_TRANSFER_SIZE ? + size : MAX_TRANSFER_SIZE; + + dev_dbg_f(&udev->dev, "transfer size %zu\n", transfer_size); + + memcpy(p, data, transfer_size); + r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + USB_REQ_FIRMWARE_DOWNLOAD, + USB_DIR_OUT | USB_TYPE_VENDOR, + code_offset, 0, p, transfer_size, 1000 /* ms */); + if (r < 0) { + dev_err(&udev->dev, + "USB control request for firmware upload" + " failed. Error number %d\n", r); + goto error; + } + transfer_size = r & ~1; + + size -= transfer_size; + data += transfer_size; + code_offset += transfer_size/sizeof(u16); + } + + if (flags & REBOOT) { + u8 ret; + + r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + USB_REQ_FIRMWARE_CONFIRM, + USB_DIR_IN | USB_TYPE_VENDOR, + 0, 0, &ret, sizeof(ret), 5000 /* ms */); + if (r != sizeof(ret)) { + dev_err(&udev->dev, + "control request firmeware confirmation failed." + " Return value %d\n", r); + if (r >= 0) + r = -ENODEV; + goto error; + } + if (ret & 0x80) { + dev_err(&udev->dev, + "Internal error while downloading." + " Firmware confirm return value %#04x\n", + (unsigned int)ret); + r = -ENODEV; + goto error; + } + dev_dbg_f(&udev->dev, "firmware confirm return value %#04x\n", + (unsigned int)ret); + } + + r = 0; +error: + kfree(p); + return r; +} + +static u16 get_word(const void *data, u16 offset) +{ + const __le16 *p = data; + return le16_to_cpu(p[offset]); +} + +static char *get_fw_name(char *buffer, size_t size, u8 device_type, + const char* postfix) +{ + scnprintf(buffer, size, "%s%s", + device_type == DEVICE_ZD1211B ? + FW_ZD1211B_PREFIX : FW_ZD1211_PREFIX, + postfix); + return buffer; +} + +static int upload_firmware(struct usb_device *udev, u8 device_type) +{ + int r; + u16 fw_bcdDevice; + u16 bcdDevice; + const struct firmware *ub_fw = NULL; + const struct firmware *uph_fw = NULL; + char fw_name[128]; + + bcdDevice = get_bcdDevice(udev); + + r = request_fw_file(&ub_fw, + get_fw_name(fw_name, sizeof(fw_name), device_type, "ub"), + &udev->dev); + if (r) + goto error; + + fw_bcdDevice = get_word(ub_fw->data, EEPROM_REGS_OFFSET); + + /* FIXME: do we have any reason to perform the kludge that the vendor + * driver does when there is a version mismatch? (their driver uploads + * different firmwares and stuff) + */ + if (fw_bcdDevice != bcdDevice) { + dev_info(&udev->dev, + "firmware device id %#06x and actual device id " + "%#06x differ, continuing anyway\n", + fw_bcdDevice, bcdDevice); + } else { + dev_dbg_f(&udev->dev, + "firmware device id %#06x is equal to the " + "actual device id\n", fw_bcdDevice); + } + + + r = request_fw_file(&uph_fw, + get_fw_name(fw_name, sizeof(fw_name), device_type, "uphr"), + &udev->dev); + if (r) + goto error; + + r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START_OFFSET, + REBOOT); + if (r) { + dev_err(&udev->dev, + "Could not upload firmware code uph. Error number %d\n", + r); + } + + /* FALL-THROUGH */ +error: + release_firmware(ub_fw); + release_firmware(uph_fw); + return r; +} + +static void disable_read_regs_int(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + ZD_ASSERT(in_interrupt()); + spin_lock(&intr->lock); + intr->read_regs_enabled = 0; + spin_unlock(&intr->lock); +} + +#define urb_dev(urb) (&(urb)->dev->dev) + +static inline void handle_regs_int(struct urb *urb) +{ + struct zd_usb *usb = urb->context; + struct zd_usb_interrupt *intr = &usb->intr; + int len; + + ZD_ASSERT(in_interrupt()); + spin_lock(&intr->lock); + + if (intr->read_regs_enabled) { + intr->read_regs.length = len = urb->actual_length; + + if (len > sizeof(intr->read_regs.buffer)) + len = sizeof(intr->read_regs.buffer); + memcpy(intr->read_regs.buffer, urb->transfer_buffer, len); + intr->read_regs_enabled = 0; + complete(&intr->read_regs.completion); + goto out; + } + + dev_dbg_f(urb_dev(urb), "regs interrupt ignored\n"); +out: + spin_unlock(&intr->lock); +} + +static inline void handle_retry_failed_int(struct urb *urb) +{ + dev_dbg_f(urb_dev(urb), "retry failed interrupt\n"); +} + + +static void int_urb_complete(struct urb *urb, struct pt_regs *pt_regs) +{ + int r; + struct usb_int_header *hdr; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + goto kfree; + case -EPIPE: + usb_clear_halt(urb->dev, EP_INT_IN); + /* FALL-THROUGH */ + default: + goto resubmit; + } + + if (urb->actual_length < sizeof(hdr)) { + dev_dbg_f(urb_dev(urb), "error: urb %p to small\n", urb); + goto resubmit; + } + + hdr = urb->transfer_buffer; + if (hdr->type != USB_INT_TYPE) { + dev_dbg_f(urb_dev(urb), "error: urb %p wrong type\n", urb); + goto resubmit; + } + + switch (hdr->id) { + case USB_INT_ID_REGS: + handle_regs_int(urb); + break; + case USB_INT_ID_RETRY_FAILED: + handle_retry_failed_int(urb); + break; + default: + dev_dbg_f(urb_dev(urb), "error: urb %p unknown id %x\n", urb, + (unsigned int)hdr->id); + goto resubmit; + } + +resubmit: + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) { + dev_dbg_f(urb_dev(urb), "resubmit urb %p\n", urb); + goto kfree; + } + return; +kfree: + kfree(urb->transfer_buffer); +} + +static inline int int_urb_interval(struct usb_device *udev) +{ + switch (udev->speed) { + case USB_SPEED_HIGH: + return 4; + case USB_SPEED_LOW: + return 10; + case USB_SPEED_FULL: + default: + return 1; + } +} + +static inline int usb_int_enabled(struct zd_usb *usb) +{ + unsigned long flags; + struct zd_usb_interrupt *intr = &usb->intr; + struct urb *urb; + + spin_lock_irqsave(&intr->lock, flags); + urb = intr->urb; + spin_unlock_irqrestore(&intr->lock, flags); + return urb != NULL; +} + +int zd_usb_enable_int(struct zd_usb *usb) +{ + int r; + struct usb_device *udev; + struct zd_usb_interrupt *intr = &usb->intr; + void *transfer_buffer = NULL; + struct urb *urb; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + urb = usb_alloc_urb(0, GFP_NOFS); + if (!urb) { + r = -ENOMEM; + goto out; + } + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&intr->lock); + if (intr->urb) { + spin_unlock_irq(&intr->lock); + r = 0; + goto error_free_urb; + } + intr->urb = urb; + spin_unlock_irq(&intr->lock); + + /* TODO: make it a DMA buffer */ + r = -ENOMEM; + transfer_buffer = kmalloc(USB_MAX_EP_INT_BUFFER, GFP_NOFS); + if (!transfer_buffer) { + dev_dbg_f(zd_usb_dev(usb), + "couldn't allocate transfer_buffer\n"); + goto error_set_urb_null; + } + + udev = zd_usb_to_usbdev(usb); + usb_fill_int_urb(urb, udev, usb_rcvintpipe(udev, EP_INT_IN), + transfer_buffer, USB_MAX_EP_INT_BUFFER, + int_urb_complete, usb, + intr->interval); + + dev_dbg_f(zd_usb_dev(usb), "submit urb %p\n", intr->urb); + r = usb_submit_urb(urb, GFP_NOFS); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "Couldn't submit urb. Error number %d\n", r); + goto error; + } + + return 0; +error: + kfree(transfer_buffer); +error_set_urb_null: + spin_lock_irq(&intr->lock); + intr->urb = NULL; + spin_unlock_irq(&intr->lock); +error_free_urb: + usb_free_urb(urb); +out: + return r; +} + +void zd_usb_disable_int(struct zd_usb *usb) +{ + unsigned long flags; + struct zd_usb_interrupt *intr = &usb->intr; + struct urb *urb; + + spin_lock_irqsave(&intr->lock, flags); + urb = intr->urb; + if (!urb) { + spin_unlock_irqrestore(&intr->lock, flags); + return; + } + intr->urb = NULL; + spin_unlock_irqrestore(&intr->lock, flags); + + usb_kill_urb(urb); + dev_dbg_f(zd_usb_dev(usb), "urb %p killed\n", urb); + usb_free_urb(urb); +} + +static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer, + unsigned int length) +{ + int i; + struct zd_mac *mac = zd_usb_to_mac(usb); + const struct rx_length_info *length_info; + + if (length < sizeof(struct rx_length_info)) { + /* It's not a complete packet anyhow. */ + return; + } + length_info = (struct rx_length_info *) + (buffer + length - sizeof(struct rx_length_info)); + + /* It might be that three frames are merged into a single URB + * transaction. We have to check for the length info tag. + * + * While testing we discovered that length_info might be unaligned, + * because if USB transactions are merged, the last packet will not + * be padded. Unaligned access might also happen if the length_info + * structure is not present. + */ + if (get_unaligned(&length_info->tag) == RX_LENGTH_INFO_TAG) { + unsigned int l, k, n; + for (i = 0, l = 0;; i++) { + k = le16_to_cpu(get_unaligned( + &length_info->length[i])); + n = l+k; + if (n > length) + return; + zd_mac_rx(mac, buffer+l, k); + if (i >= 2) + return; + l = (n+3) & ~3; + } + } else { + zd_mac_rx(mac, buffer, length); + } +} + +static void rx_urb_complete(struct urb *urb, struct pt_regs *pt_regs) +{ + struct zd_usb *usb; + struct zd_usb_rx *rx; + const u8 *buffer; + unsigned int length; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + return; + case -EPIPE: + usb_clear_halt(urb->dev, EP_DATA_IN); + /* FALL-THROUGH */ + default: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + goto resubmit; + } + + buffer = urb->transfer_buffer; + length = urb->actual_length; + usb = urb->context; + rx = &usb->rx; + + if (length%rx->usb_packet_size > rx->usb_packet_size-4) { + /* If there is an old first fragment, we don't care. */ + dev_dbg_f(urb_dev(urb), "*** first fragment ***\n"); + ZD_ASSERT(length <= ARRAY_SIZE(rx->fragment)); + spin_lock(&rx->lock); + memcpy(rx->fragment, buffer, length); + rx->fragment_length = length; + spin_unlock(&rx->lock); + goto resubmit; + } + + spin_lock(&rx->lock); + if (rx->fragment_length > 0) { + /* We are on a second fragment, we believe */ + ZD_ASSERT(length + rx->fragment_length <= + ARRAY_SIZE(rx->fragment)); + dev_dbg_f(urb_dev(urb), "*** second fragment ***\n"); + memcpy(rx->fragment+rx->fragment_length, buffer, length); + handle_rx_packet(usb, rx->fragment, + rx->fragment_length + length); + rx->fragment_length = 0; + spin_unlock(&rx->lock); + } else { + spin_unlock(&rx->lock); + handle_rx_packet(usb, buffer, length); + } + +resubmit: + usb_submit_urb(urb, GFP_ATOMIC); +} + +struct urb *alloc_urb(struct zd_usb *usb) +{ + struct usb_device *udev = zd_usb_to_usbdev(usb); + struct urb *urb; + void *buffer; + + urb = usb_alloc_urb(0, GFP_NOFS); + if (!urb) + return NULL; + buffer = usb_buffer_alloc(udev, USB_MAX_RX_SIZE, GFP_NOFS, + &urb->transfer_dma); + if (!buffer) { + usb_free_urb(urb); + return NULL; + } + + usb_fill_bulk_urb(urb, udev, usb_rcvbulkpipe(udev, EP_DATA_IN), + buffer, USB_MAX_RX_SIZE, + rx_urb_complete, usb); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + return urb; +} + +void free_urb(struct urb *urb) +{ + if (!urb) + return; + usb_buffer_free(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + usb_free_urb(urb); +} + +int zd_usb_enable_rx(struct zd_usb *usb) +{ + int i, r; + struct zd_usb_rx *rx = &usb->rx; + struct urb **urbs; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + r = -ENOMEM; + urbs = kcalloc(URBS_COUNT, sizeof(struct urb *), GFP_NOFS); + if (!urbs) + goto error; + for (i = 0; i < URBS_COUNT; i++) { + urbs[i] = alloc_urb(usb); + if (!urbs[i]) + goto error; + } + + ZD_ASSERT(!irqs_disabled()); + spin_lock_irq(&rx->lock); + if (rx->urbs) { + spin_unlock_irq(&rx->lock); + r = 0; + goto error; + } + rx->urbs = urbs; + rx->urbs_count = URBS_COUNT; + spin_unlock_irq(&rx->lock); + + for (i = 0; i < URBS_COUNT; i++) { + r = usb_submit_urb(urbs[i], GFP_NOFS); + if (r) + goto error_submit; + } + + return 0; +error_submit: + for (i = 0; i < URBS_COUNT; i++) { + usb_kill_urb(urbs[i]); + } + spin_lock_irq(&rx->lock); + rx->urbs = NULL; + rx->urbs_count = 0; + spin_unlock_irq(&rx->lock); +error: + if (urbs) { + for (i = 0; i < URBS_COUNT; i++) + free_urb(urbs[i]); + } + return r; +} + +void zd_usb_disable_rx(struct zd_usb *usb) +{ + int i; + unsigned long flags; + struct urb **urbs; + unsigned int count; + struct zd_usb_rx *rx = &usb->rx; + + spin_lock_irqsave(&rx->lock, flags); + urbs = rx->urbs; + count = rx->urbs_count; + spin_unlock_irqrestore(&rx->lock, flags); + if (!urbs) + return; + + for (i = 0; i < count; i++) { + usb_kill_urb(urbs[i]); + free_urb(urbs[i]); + } + kfree(urbs); + + spin_lock_irqsave(&rx->lock, flags); + rx->urbs = NULL; + rx->urbs_count = 0; + spin_unlock_irqrestore(&rx->lock, flags); +} + +static void tx_urb_complete(struct urb *urb, struct pt_regs *pt_regs) +{ + int r; + + switch (urb->status) { + case 0: + break; + case -ESHUTDOWN: + case -EINVAL: + case -ENODEV: + case -ENOENT: + case -ECONNRESET: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + break; + case -EPIPE: + usb_clear_halt(urb->dev, EP_DATA_OUT); + /* FALL-THROUGH */ + default: + dev_dbg_f(urb_dev(urb), "urb %p error %d\n", urb, urb->status); + goto resubmit; + } +free_urb: + usb_buffer_free(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + usb_free_urb(urb); + return; +resubmit: + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) { + dev_dbg_f(urb_dev(urb), "error resubmit urb %p %d\n", urb, r); + goto free_urb; + } +} + +/* Puts the frame on the USB endpoint. It doesn't wait for + * completion. The frame must contain the control set. + */ +int zd_usb_tx(struct zd_usb *usb, const u8 *frame, unsigned int length) +{ + int r; + struct usb_device *udev = zd_usb_to_usbdev(usb); + struct urb *urb; + void *buffer; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + r = -ENOMEM; + goto out; + } + + buffer = usb_buffer_alloc(zd_usb_to_usbdev(usb), length, GFP_ATOMIC, + &urb->transfer_dma); + if (!buffer) { + r = -ENOMEM; + goto error_free_urb; + } + memcpy(buffer, frame, length); + + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_DATA_OUT), + buffer, length, tx_urb_complete, NULL); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + r = usb_submit_urb(urb, GFP_ATOMIC); + if (r) + goto error; + return 0; +error: + usb_buffer_free(zd_usb_to_usbdev(usb), length, buffer, + urb->transfer_dma); +error_free_urb: + usb_free_urb(urb); +out: + return r; +} + +static inline void init_usb_interrupt(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + spin_lock_init(&intr->lock); + intr->interval = int_urb_interval(zd_usb_to_usbdev(usb)); + init_completion(&intr->read_regs.completion); + intr->read_regs.cr_int_addr = cpu_to_le16(usb_addr(usb, CR_INTERRUPT)); +} + +static inline void init_usb_rx(struct zd_usb *usb) +{ + struct zd_usb_rx *rx = &usb->rx; + spin_lock_init(&rx->lock); + if (interface_to_usbdev(usb->intf)->speed == USB_SPEED_HIGH) { + rx->usb_packet_size = 512; + } else { + rx->usb_packet_size = 64; + } + ZD_ASSERT(rx->fragment_length == 0); +} + +static inline void init_usb_tx(struct zd_usb *usb) +{ + /* FIXME: at this point we will allocate a fixed number of urb's for + * use in a cyclic scheme */ +} + +void zd_usb_init(struct zd_usb *usb, struct net_device *netdev, + struct usb_interface *intf) +{ + memset(usb, 0, sizeof(*usb)); + usb->intf = usb_get_intf(intf); + usb_set_intfdata(usb->intf, netdev); + init_usb_interrupt(usb); + init_usb_tx(usb); + init_usb_rx(usb); +} + +int zd_usb_init_hw(struct zd_usb *usb) +{ + int r; + struct zd_chip *chip = zd_usb_to_chip(usb); + + ZD_ASSERT(mutex_is_locked(&chip->mutex)); + r = zd_ioread16_locked(chip, &usb->fw_base_offset, + USB_REG((u16)FW_BASE_ADDR_OFFSET)); + if (r) + return r; + dev_dbg_f(zd_usb_dev(usb), "fw_base_offset: %#06hx\n", + usb->fw_base_offset); + + return 0; +} + +void zd_usb_clear(struct zd_usb *usb) +{ + usb_set_intfdata(usb->intf, NULL); + usb_put_intf(usb->intf); + memset(usb, 0, sizeof(*usb)); + /* FIXME: usb_interrupt, usb_tx, usb_rx? */ +} + +static const char *speed(enum usb_device_speed speed) +{ + switch (speed) { + case USB_SPEED_LOW: + return "low"; + case USB_SPEED_FULL: + return "full"; + case USB_SPEED_HIGH: + return "high"; + default: + return "unknown speed"; + } +} + +static int scnprint_id(struct usb_device *udev, char *buffer, size_t size) +{ + return scnprintf(buffer, size, "%04hx:%04hx v%04hx %s", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + get_bcdDevice(udev), + speed(udev->speed)); +} + +int zd_usb_scnprint_id(struct zd_usb *usb, char *buffer, size_t size) +{ + struct usb_device *udev = interface_to_usbdev(usb->intf); + return scnprint_id(udev, buffer, size); +} + +#ifdef DEBUG +static void print_id(struct usb_device *udev) +{ + char buffer[40]; + + scnprint_id(udev, buffer, sizeof(buffer)); + buffer[sizeof(buffer)-1] = 0; + dev_dbg_f(&udev->dev, "%s\n", buffer); +} +#else +#define print_id(udev) do { } while (0) +#endif + +static int probe(struct usb_interface *intf, const struct usb_device_id *id) +{ + int r; + struct usb_device *udev = interface_to_usbdev(intf); + struct net_device *netdev = NULL; + + print_id(udev); + + switch (udev->speed) { + case USB_SPEED_LOW: + case USB_SPEED_FULL: + case USB_SPEED_HIGH: + break; + default: + dev_dbg_f(&intf->dev, "Unknown USB speed\n"); + r = -ENODEV; + goto error; + } + + netdev = zd_netdev_alloc(intf); + if (netdev == NULL) { + r = -ENOMEM; + goto error; + } + + r = upload_firmware(udev, id->driver_info); + if (r) { + dev_err(&intf->dev, + "couldn't load firmware. Error number %d\n", r); + goto error; + } + + r = usb_reset_configuration(udev); + if (r) { + dev_dbg_f(&intf->dev, + "couldn't reset configuration. Error number %d\n", r); + goto error; + } + + /* At this point the interrupt endpoint is not generally enabled. We + * save the USB bandwidth until the network device is opened. But + * notify that the initialization of the MAC will require the + * interrupts to be temporary enabled. + */ + r = zd_mac_init_hw(zd_netdev_mac(netdev), id->driver_info); + if (r) { + dev_dbg_f(&intf->dev, + "couldn't initialize mac. Error number %d\n", r); + goto error; + } + + r = register_netdev(netdev); + if (r) { + dev_dbg_f(&intf->dev, + "couldn't register netdev. Error number %d\n", r); + goto error; + } + + dev_dbg_f(&intf->dev, "successful\n"); + dev_info(&intf->dev,"%s\n", netdev->name); + return 0; +error: + usb_reset_device(interface_to_usbdev(intf)); + zd_netdev_free(netdev); + return r; +} + +static void disconnect(struct usb_interface *intf) +{ + struct net_device *netdev = zd_intf_to_netdev(intf); + struct zd_mac *mac = zd_netdev_mac(netdev); + struct zd_usb *usb = &mac->chip.usb; + + dev_dbg_f(zd_usb_dev(usb), "\n"); + + zd_netdev_disconnect(netdev); + + /* Just in case something has gone wrong! */ + zd_usb_disable_rx(usb); + zd_usb_disable_int(usb); + + /* If the disconnect has been caused by a removal of the + * driver module, the reset allows reloading of the driver. If the + * reset will not be executed here, the upload of the firmware in the + * probe function caused by the reloading of the driver will fail. + */ + usb_reset_device(interface_to_usbdev(intf)); + + /* If somebody still waits on this lock now, this is an error. */ + zd_netdev_free(netdev); + dev_dbg(&intf->dev, "disconnected\n"); +} + +static struct usb_driver driver = { + .name = "zd1211rw", + .id_table = usb_ids, + .probe = probe, + .disconnect = disconnect, +}; + +static int __init usb_init(void) +{ + int r; + + pr_debug("usb_init()\n"); + + r = usb_register(&driver); + if (r) { + printk(KERN_ERR "usb_register() failed. Error number %d\n", r); + return r; + } + + pr_debug("zd1211rw initialized\n"); + return 0; +} + +static void __exit usb_exit(void) +{ + pr_debug("usb_exit()\n"); + usb_deregister(&driver); +} + +module_init(usb_init); +module_exit(usb_exit); + +static int usb_int_regs_length(unsigned int count) +{ + return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data); +} + +static void prepare_read_regs_int(struct zd_usb *usb) +{ + struct zd_usb_interrupt *intr = &usb->intr; + + spin_lock(&intr->lock); + intr->read_regs_enabled = 1; + INIT_COMPLETION(intr->read_regs.completion); + spin_unlock(&intr->lock); +} + +static int get_results(struct zd_usb *usb, u16 *values, + struct usb_req_read_regs *req, unsigned int count) +{ + int r; + int i; + struct zd_usb_interrupt *intr = &usb->intr; + struct read_regs_int *rr = &intr->read_regs; + struct usb_int_regs *regs = (struct usb_int_regs *)rr->buffer; + + spin_lock(&intr->lock); + + r = -EIO; + /* The created block size seems to be larger than expected. + * However results appear to be correct. + */ + if (rr->length < usb_int_regs_length(count)) { + dev_dbg_f(zd_usb_dev(usb), + "error: actual length %d less than expected %d\n", + rr->length, usb_int_regs_length(count)); + goto error_unlock; + } + if (rr->length > sizeof(rr->buffer)) { + dev_dbg_f(zd_usb_dev(usb), + "error: actual length %d exceeds buffer size %zu\n", + rr->length, sizeof(rr->buffer)); + goto error_unlock; + } + + for (i = 0; i < count; i++) { + struct reg_data *rd = ®s->regs[i]; + if (rd->addr != req->addr[i]) { + dev_dbg_f(zd_usb_dev(usb), + "rd[%d] addr %#06hx expected %#06hx\n", i, + le16_to_cpu(rd->addr), + le16_to_cpu(req->addr[i])); + goto error_unlock; + } + values[i] = le16_to_cpu(rd->value); + } + + r = 0; +error_unlock: + spin_unlock(&intr->lock); + return r; +} + +int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, + const zd_addr_t *addresses, unsigned int count) +{ + int r; + int i, req_len, actual_req_len; + struct usb_device *udev; + struct usb_req_read_regs *req = NULL; + unsigned long timeout; + + if (count < 1) { + dev_dbg_f(zd_usb_dev(usb), "error: count is zero\n"); + return -EINVAL; + } + if (count > USB_MAX_IOREAD16_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: count %u exceeds possible max %u\n", + count, USB_MAX_IOREAD16_COUNT); + return -EINVAL; + } + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + if (!usb_int_enabled(usb)) { + dev_dbg_f(zd_usb_dev(usb), + "error: usb interrupt not enabled\n"); + return -EWOULDBLOCK; + } + + req_len = sizeof(struct usb_req_read_regs) + count * sizeof(__le16); + req = kmalloc(req_len, GFP_NOFS); + if (!req) + return -ENOMEM; + req->id = cpu_to_le16(USB_REQ_READ_REGS); + for (i = 0; i < count; i++) + req->addr[i] = cpu_to_le16(usb_addr(usb, addresses[i])); + + udev = zd_usb_to_usbdev(usb); + prepare_read_regs_int(usb); + r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, &actual_req_len, 1000 /* ms */); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in usb_bulk_msg(). Error number %d\n", r); + goto error; + } + if (req_len != actual_req_len) { + dev_dbg_f(zd_usb_dev(usb), "error in usb_bulk_msg()\n" + " req_len %d != actual_req_len %d\n", + req_len, actual_req_len); + r = -EIO; + goto error; + } + + timeout = wait_for_completion_timeout(&usb->intr.read_regs.completion, + msecs_to_jiffies(1000)); + if (!timeout) { + disable_read_regs_int(usb); + dev_dbg_f(zd_usb_dev(usb), "read timed out\n"); + r = -ETIMEDOUT; + goto error; + } + + r = get_results(usb, values, req, count); +error: + kfree(req); + return r; +} + +int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, + unsigned int count) +{ + int r; + struct usb_device *udev; + struct usb_req_write_regs *req = NULL; + int i, req_len, actual_req_len; + + if (count == 0) + return 0; + if (count > USB_MAX_IOWRITE16_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: count %u exceeds possible max %u\n", + count, USB_MAX_IOWRITE16_COUNT); + return -EINVAL; + } + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + + req_len = sizeof(struct usb_req_write_regs) + + count * sizeof(struct reg_data); + req = kmalloc(req_len, GFP_NOFS); + if (!req) + return -ENOMEM; + + req->id = cpu_to_le16(USB_REQ_WRITE_REGS); + for (i = 0; i < count; i++) { + struct reg_data *rw = &req->reg_writes[i]; + rw->addr = cpu_to_le16(usb_addr(usb, ioreqs[i].addr)); + rw->value = cpu_to_le16(ioreqs[i].value); + } + + udev = zd_usb_to_usbdev(usb); + r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, &actual_req_len, 1000 /* ms */); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in usb_bulk_msg(). Error number %d\n", r); + goto error; + } + if (req_len != actual_req_len) { + dev_dbg_f(zd_usb_dev(usb), + "error in usb_bulk_msg()" + " req_len %d != actual_req_len %d\n", + req_len, actual_req_len); + r = -EIO; + goto error; + } + + /* FALL-THROUGH with r == 0 */ +error: + kfree(req); + return r; +} + +int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits) +{ + int r; + struct usb_device *udev; + struct usb_req_rfwrite *req = NULL; + int i, req_len, actual_req_len; + u16 bit_value_template; + + if (in_atomic()) { + dev_dbg_f(zd_usb_dev(usb), + "error: io in atomic context not supported\n"); + return -EWOULDBLOCK; + } + if (bits < USB_MIN_RFWRITE_BIT_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: bits %d are smaller than" + " USB_MIN_RFWRITE_BIT_COUNT %d\n", + bits, USB_MIN_RFWRITE_BIT_COUNT); + return -EINVAL; + } + if (bits > USB_MAX_RFWRITE_BIT_COUNT) { + dev_dbg_f(zd_usb_dev(usb), + "error: bits %d exceed USB_MAX_RFWRITE_BIT_COUNT %d\n", + bits, USB_MAX_RFWRITE_BIT_COUNT); + return -EINVAL; + } +#ifdef DEBUG + if (value & (~0UL << bits)) { + dev_dbg_f(zd_usb_dev(usb), + "error: value %#09x has bits >= %d set\n", + value, bits); + return -EINVAL; + } +#endif /* DEBUG */ + + dev_dbg_f(zd_usb_dev(usb), "value %#09x bits %d\n", value, bits); + + r = zd_usb_ioread16(usb, &bit_value_template, CR203); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error %d: Couldn't read CR203\n", r); + goto out; + } + bit_value_template &= ~(RF_IF_LE|RF_CLK|RF_DATA); + + req_len = sizeof(struct usb_req_rfwrite) + bits * sizeof(__le16); + req = kmalloc(req_len, GFP_NOFS); + if (!req) + return -ENOMEM; + + req->id = cpu_to_le16(USB_REQ_WRITE_RF); + /* 1: 3683a, but not used in ZYDAS driver */ + req->value = cpu_to_le16(2); + req->bits = cpu_to_le16(bits); + + for (i = 0; i < bits; i++) { + u16 bv = bit_value_template; + if (value & (1 << (bits-1-i))) + bv |= RF_DATA; + req->bit_values[i] = cpu_to_le16(bv); + } + + udev = zd_usb_to_usbdev(usb); + r = usb_bulk_msg(udev, usb_sndbulkpipe(udev, EP_REGS_OUT), + req, req_len, &actual_req_len, 1000 /* ms */); + if (r) { + dev_dbg_f(zd_usb_dev(usb), + "error in usb_bulk_msg(). Error number %d\n", r); + goto out; + } + if (req_len != actual_req_len) { + dev_dbg_f(zd_usb_dev(usb), "error in usb_bulk_msg()" + " req_len %d != actual_req_len %d\n", + req_len, actual_req_len); + r = -EIO; + goto out; + } + + /* FALL-THROUGH with r == 0 */ +out: + kfree(req); + return r; +} diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h new file mode 100644 index 00000000000..d6420283bd5 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_usb.h @@ -0,0 +1,240 @@ +/* zd_usb.h: Header for USB interface implemented by ZD1211 chip + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_USB_H +#define _ZD_USB_H + +#include <linux/completion.h> +#include <linux/netdevice.h> +#include <linux/spinlock.h> +#include <linux/skbuff.h> +#include <linux/usb.h> + +#include "zd_def.h" +#include "zd_types.h" + +enum devicetype { + DEVICE_ZD1211 = 0, + DEVICE_ZD1211B = 1, +}; + +enum endpoints { + EP_CTRL = 0, + EP_DATA_OUT = 1, + EP_DATA_IN = 2, + EP_INT_IN = 3, + EP_REGS_OUT = 4, +}; + +enum { + USB_MAX_TRANSFER_SIZE = 4096, /* bytes */ + /* FIXME: The original driver uses this value. We have to check, + * whether the MAX_TRANSFER_SIZE is sufficient and this needs only be + * used if one combined frame is split over two USB transactions. + */ + USB_MAX_RX_SIZE = 4800, /* bytes */ + USB_MAX_IOWRITE16_COUNT = 15, + USB_MAX_IOWRITE32_COUNT = USB_MAX_IOWRITE16_COUNT/2, + USB_MAX_IOREAD16_COUNT = 15, + USB_MAX_IOREAD32_COUNT = USB_MAX_IOREAD16_COUNT/2, + USB_MIN_RFWRITE_BIT_COUNT = 16, + USB_MAX_RFWRITE_BIT_COUNT = 28, + USB_MAX_EP_INT_BUFFER = 64, + USB_ZD1211B_BCD_DEVICE = 0x4810, +}; + +enum control_requests { + USB_REQ_WRITE_REGS = 0x21, + USB_REQ_READ_REGS = 0x22, + USB_REQ_WRITE_RF = 0x23, + USB_REQ_PROG_FLASH = 0x24, + USB_REQ_EEPROM_START = 0x0128, /* ? request is a byte */ + USB_REQ_EEPROM_MID = 0x28, + USB_REQ_EEPROM_END = 0x0228, /* ? request is a byte */ + USB_REQ_FIRMWARE_DOWNLOAD = 0x30, + USB_REQ_FIRMWARE_CONFIRM = 0x31, + USB_REQ_FIRMWARE_READ_DATA = 0x32, +}; + +struct usb_req_read_regs { + __le16 id; + __le16 addr[0]; +} __attribute__((packed)); + +struct reg_data { + __le16 addr; + __le16 value; +} __attribute__((packed)); + +struct usb_req_write_regs { + __le16 id; + struct reg_data reg_writes[0]; +} __attribute__((packed)); + +enum { + RF_IF_LE = 0x02, + RF_CLK = 0x04, + RF_DATA = 0x08, +}; + +struct usb_req_rfwrite { + __le16 id; + __le16 value; + /* 1: 3683a */ + /* 2: other (default) */ + __le16 bits; + /* RF2595: 24 */ + __le16 bit_values[0]; + /* (CR203 & ~(RF_IF_LE | RF_CLK | RF_DATA)) | (bit ? RF_DATA : 0) */ +} __attribute__((packed)); + +/* USB interrupt */ + +enum usb_int_id { + USB_INT_TYPE = 0x01, + USB_INT_ID_REGS = 0x90, + USB_INT_ID_RETRY_FAILED = 0xa0, +}; + +enum usb_int_flags { + USB_INT_READ_REGS_EN = 0x01, +}; + +struct usb_int_header { + u8 type; /* must always be 1 */ + u8 id; +} __attribute__((packed)); + +struct usb_int_regs { + struct usb_int_header hdr; + struct reg_data regs[0]; +} __attribute__((packed)); + +struct usb_int_retry_fail { + struct usb_int_header hdr; + u8 new_rate; + u8 _dummy; + u8 addr[ETH_ALEN]; + u8 ibss_wakeup_dest; +} __attribute__((packed)); + +struct read_regs_int { + struct completion completion; + /* Stores the USB int structure and contains the USB address of the + * first requested register before request. + */ + u8 buffer[USB_MAX_EP_INT_BUFFER]; + int length; + __le16 cr_int_addr; +}; + +struct zd_ioreq16 { + zd_addr_t addr; + u16 value; +}; + +struct zd_ioreq32 { + zd_addr_t addr; + u32 value; +}; + +struct zd_usb_interrupt { + struct read_regs_int read_regs; + spinlock_t lock; + struct urb *urb; + int interval; + u8 read_regs_enabled:1; +}; + +static inline struct usb_int_regs *get_read_regs(struct zd_usb_interrupt *intr) +{ + return (struct usb_int_regs *)intr->read_regs.buffer; +} + +#define URBS_COUNT 5 + +struct zd_usb_rx { + spinlock_t lock; + u8 fragment[2*USB_MAX_RX_SIZE]; + unsigned int fragment_length; + unsigned int usb_packet_size; + struct urb **urbs; + int urbs_count; +}; + +struct zd_usb_tx { + spinlock_t lock; +}; + +/* Contains the usb parts. The structure doesn't require a lock, because intf + * and fw_base_offset, will not be changed after initialization. + */ +struct zd_usb { + struct zd_usb_interrupt intr; + struct zd_usb_rx rx; + struct zd_usb_tx tx; + struct usb_interface *intf; + u16 fw_base_offset; +}; + +#define zd_usb_dev(usb) (&usb->intf->dev) + +static inline struct usb_device *zd_usb_to_usbdev(struct zd_usb *usb) +{ + return interface_to_usbdev(usb->intf); +} + +static inline struct net_device *zd_intf_to_netdev(struct usb_interface *intf) +{ + return usb_get_intfdata(intf); +} + +static inline struct net_device *zd_usb_to_netdev(struct zd_usb *usb) +{ + return zd_intf_to_netdev(usb->intf); +} + +void zd_usb_init(struct zd_usb *usb, struct net_device *netdev, + struct usb_interface *intf); +int zd_usb_init_hw(struct zd_usb *usb); +void zd_usb_clear(struct zd_usb *usb); + +int zd_usb_scnprint_id(struct zd_usb *usb, char *buffer, size_t size); + +int zd_usb_enable_int(struct zd_usb *usb); +void zd_usb_disable_int(struct zd_usb *usb); + +int zd_usb_enable_rx(struct zd_usb *usb); +void zd_usb_disable_rx(struct zd_usb *usb); + +int zd_usb_tx(struct zd_usb *usb, const u8 *frame, unsigned int length); + +int zd_usb_ioread16v(struct zd_usb *usb, u16 *values, + const zd_addr_t *addresses, unsigned int count); + +static inline int zd_usb_ioread16(struct zd_usb *usb, u16 *value, + const zd_addr_t addr) +{ + return zd_usb_ioread16v(usb, value, (const zd_addr_t *)&addr, 1); +} + +int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, + unsigned int count); + +int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits); + +#endif /* _ZD_USB_H */ diff --git a/drivers/net/wireless/zd1211rw/zd_util.c b/drivers/net/wireless/zd1211rw/zd_util.c new file mode 100644 index 00000000000..d20036c15d1 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_util.c @@ -0,0 +1,82 @@ +/* zd_util.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Utility program + */ + +#include "zd_def.h" +#include "zd_util.h" + +#ifdef DEBUG +static char hex(u8 v) +{ + v &= 0xf; + return (v < 10 ? '0' : 'a' - 10) + v; +} + +static char hex_print(u8 c) +{ + return (0x20 <= c && c < 0x7f) ? c : '.'; +} + +static void dump_line(const u8 *bytes, size_t size) +{ + char c; + size_t i; + + size = size <= 8 ? size : 8; + printk(KERN_DEBUG "zd1211 %p ", bytes); + for (i = 0; i < 8; i++) { + switch (i) { + case 1: + case 5: + c = '.'; + break; + case 3: + c = ':'; + break; + default: + c = ' '; + } + if (i < size) { + printk("%c%c%c", hex(bytes[i] >> 4), hex(bytes[i]), c); + } else { + printk(" %c", c); + } + } + + for (i = 0; i < size; i++) + printk("%c", hex_print(bytes[i])); + printk("\n"); +} + +void zd_hexdump(const void *bytes, size_t size) +{ + size_t i = 0; + + do { + dump_line((u8 *)bytes + i, size-i); + i += 8; + } while (i < size); +} +#endif /* DEBUG */ + +void *zd_tail(const void *buffer, size_t buffer_size, size_t tail_size) +{ + if (buffer_size < tail_size) + return NULL; + return (u8 *)buffer + (buffer_size - tail_size); +} diff --git a/drivers/net/wireless/zd1211rw/zd_util.h b/drivers/net/wireless/zd1211rw/zd_util.h new file mode 100644 index 00000000000..ce26f7adea9 --- /dev/null +++ b/drivers/net/wireless/zd1211rw/zd_util.h @@ -0,0 +1,29 @@ +/* zd_util.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ZD_UTIL_H +#define _ZD_UTIL_H + +void *zd_tail(const void *buffer, size_t buffer_size, size_t tail_size); + +#ifdef DEBUG +void zd_hexdump(const void *bytes, size_t size); +#else +#define zd_hexdump(bytes, size) +#endif /* DEBUG */ + +#endif /* _ZD_UTIL_H */ diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c index bbbf7e274a2..8459a18254a 100644 --- a/drivers/net/yellowfin.c +++ b/drivers/net/yellowfin.c @@ -19,37 +19,13 @@ Support and updates available at http://www.scyld.com/network/yellowfin.html + [link no longer provides useful info -jgarzik] - - Linux kernel changelog: - ----------------------- - - LK1.1.1 (jgarzik): Port to 2.4 kernel - - LK1.1.2 (jgarzik): - * Merge in becker version 1.05 - - LK1.1.3 (jgarzik): - * Various cleanups - * Update yellowfin_timer to correctly calculate duplex. - (suggested by Manfred Spraul) - - LK1.1.4 (val@nmt.edu): - * Fix three endian-ness bugs - * Support dual function SYM53C885E ethernet chip - - LK1.1.5 (val@nmt.edu): - * Fix forced full-duplex bug I introduced - - LK1.1.6 (val@nmt.edu): - * Only print warning on truly "oversized" packets - * Fix theoretical bug on gigabit cards - return to 1.1.3 behavior - */ #define DRV_NAME "yellowfin" -#define DRV_VERSION "1.05+LK1.1.6" -#define DRV_RELDATE "Feb 11, 2002" +#define DRV_VERSION "2.0" +#define DRV_RELDATE "Jun 27, 2006" #define PFX DRV_NAME ": " @@ -239,8 +215,11 @@ enum capability_flags { HasMACAddrBug=32, /* Only on early revs. */ DontUseEeprom=64, /* Don't read the MAC from the EEPROm. */ }; + /* The PCI I/O space extent. */ -#define YELLOWFIN_SIZE 0x100 +enum { + YELLOWFIN_SIZE = 0x100, +}; struct pci_id_info { const char *name; @@ -248,16 +227,14 @@ struct pci_id_info { int pci, pci_mask, subsystem, subsystem_mask; int revision, revision_mask; /* Only 8 bits. */ } id; - int io_size; /* Needed for I/O region check or ioremap(). */ int drv_flags; /* Driver use, intended as capability flags. */ }; static const struct pci_id_info pci_id_tbl[] = { {"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff}, - YELLOWFIN_SIZE, FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom}, {"Symbios SYM83C885", { 0x07011000, 0xffffffff}, - YELLOWFIN_SIZE, HasMII | DontUseEeprom }, + HasMII | DontUseEeprom }, { } }; diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index 15f6cd4279b..77e7202a0eb 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -1052,7 +1052,7 @@ static void ahci_thaw(struct ata_port *ap) static void ahci_error_handler(struct ata_port *ap) { - if (!(ap->flags & ATA_FLAG_FROZEN)) { + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { /* restart engine */ ahci_stop_engine(ap); ahci_start_engine(ap); @@ -1323,6 +1323,17 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* JMicron-specific fixup: make sure we're in AHCI mode */ + /* This is protected from races with ata_jmicron by the pci probe + locking */ + if (pdev->vendor == PCI_VENDOR_ID_JMICRON) { + /* AHCI enable, AHCI on function 0 */ + pci_write_config_byte(pdev, 0x41, 0xa1); + /* Function 1 is the PATA controller */ + if (PCI_FUNC(pdev->devfn)) + return -ENODEV; + } + rc = pci_enable_device(pdev); if (rc) return rc; @@ -1378,10 +1389,6 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (have_msi) hpriv->flags |= AHCI_FLAG_MSI; - /* JMicron-specific fixup: make sure we're in AHCI mode */ - if (pdev->vendor == 0x197b) - pci_write_config_byte(pdev, 0x41, 0xa1); - /* initialize adapter */ rc = ahci_host_init(probe_ent); if (rc) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 1c960ac1617..386e5f21e19 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,9 +61,9 @@ #include "libata.h" /* debounce timing parameters in msecs { interval, duration, timeout } */ -const unsigned long sata_deb_timing_boot[] = { 5, 100, 2000 }; -const unsigned long sata_deb_timing_eh[] = { 25, 500, 2000 }; -const unsigned long sata_deb_timing_before_fsrst[] = { 100, 2000, 5000 }; +const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; +const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 }; +const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 }; static unsigned int ata_dev_init_params(struct ata_device *dev, u16 heads, u16 sectors); @@ -907,7 +907,7 @@ void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, { int rc; - if (ap->flags & ATA_FLAG_FLUSH_PORT_TASK) + if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK) return; PREPARE_WORK(&ap->port_task, fn, data); @@ -938,7 +938,7 @@ void ata_port_flush_task(struct ata_port *ap) DPRINTK("ENTER\n"); spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_FLUSH_PORT_TASK; + ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK; spin_unlock_irqrestore(ap->lock, flags); DPRINTK("flush #1\n"); @@ -957,7 +957,7 @@ void ata_port_flush_task(struct ata_port *ap) } spin_lock_irqsave(ap->lock, flags); - ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; + ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK; spin_unlock_irqrestore(ap->lock, flags); if (ata_msg_ctl(ap)) @@ -1009,7 +1009,7 @@ unsigned ata_exec_internal(struct ata_device *dev, spin_lock_irqsave(ap->lock, flags); /* no internal command while frozen */ - if (ap->flags & ATA_FLAG_FROZEN) { + if (ap->pflags & ATA_PFLAG_FROZEN) { spin_unlock_irqrestore(ap->lock, flags); return AC_ERR_SYSTEM; } @@ -1325,6 +1325,19 @@ static void ata_dev_config_ncq(struct ata_device *dev, snprintf(desc, desc_sz, "NCQ (depth %d/%d)", hdepth, ddepth); } +static void ata_set_port_max_cmd_len(struct ata_port *ap) +{ + int i; + + if (ap->host) { + ap->host->max_cmd_len = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->host->max_cmd_len = max_t(unsigned int, + ap->host->max_cmd_len, + ap->device[i].cdb_len); + } +} + /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure @@ -1344,7 +1357,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) struct ata_port *ap = dev->ap; const u16 *id = dev->id; unsigned int xfer_mask; - int i, rc; + int rc; if (!ata_dev_enabled(dev) && ata_msg_info(ap)) { ata_dev_printk(dev, KERN_INFO, @@ -1404,7 +1417,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); /* print device info to dmesg */ - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "ATA-%d, " "max %s, %Lu sectors: %s %s\n", ata_id_major_version(id), @@ -1427,7 +1440,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) } /* print device info to dmesg */ - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "ATA-%d, " "max %s, %Lu sectors: CHS %u/%u/%u\n", ata_id_major_version(id), @@ -1439,7 +1452,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info) if (dev->id[59] & 0x100) { dev->multi_count = dev->id[59] & 0xff; - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "ata%u: dev %u multi count %u\n", ap->id, dev->devno, dev->multi_count); @@ -1468,21 +1481,17 @@ int ata_dev_configure(struct ata_device *dev, int print_info) } /* print device info to dmesg */ - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n", ata_mode_string(xfer_mask), cdb_intr_string); } - ap->host->max_cmd_len = 0; - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->host->max_cmd_len = max_t(unsigned int, - ap->host->max_cmd_len, - ap->device[i].cdb_len); + ata_set_port_max_cmd_len(ap); /* limit bridge transfers to udma5, 200 sectors */ if (ata_dev_knobble(dev)) { - if (ata_msg_info(ap)) + if (ata_msg_drv(ap) && print_info) ata_dev_printk(dev, KERN_INFO, "applying bridge limits\n"); dev->udma_mask &= ATA_UDMA5; @@ -2137,7 +2146,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) * return error code and failing device on failure. */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - if (ata_dev_enabled(&ap->device[i])) { + if (ata_dev_ready(&ap->device[i])) { ap->ops->set_mode(ap); break; } @@ -2203,7 +2212,8 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) for (i = 0; i < ATA_MAX_DEVICES; i++) { dev = &ap->device[i]; - if (!ata_dev_enabled(dev)) + /* don't udpate suspended devices' xfer mode */ + if (!ata_dev_ready(dev)) continue; rc = ata_dev_set_mode(dev); @@ -2579,7 +2589,7 @@ static void ata_wait_spinup(struct ata_port *ap) /* first, debounce phy if SATA */ if (ap->cbl == ATA_CBL_SATA) { - rc = sata_phy_debounce(ap, sata_deb_timing_eh); + rc = sata_phy_debounce(ap, sata_deb_timing_hotplug); /* if debounced successfully and offline, no need to wait */ if ((rc == 0 || rc == -EOPNOTSUPP) && ata_port_offline(ap)) @@ -2615,16 +2625,17 @@ static void ata_wait_spinup(struct ata_port *ap) int ata_std_prereset(struct ata_port *ap) { struct ata_eh_context *ehc = &ap->eh_context; - const unsigned long *timing; + const unsigned long *timing = sata_ehc_deb_timing(ehc); int rc; - /* hotplug? */ - if (ehc->i.flags & ATA_EHI_HOTPLUGGED) { - if (ap->flags & ATA_FLAG_HRST_TO_RESUME) - ehc->i.action |= ATA_EH_HARDRESET; - if (ap->flags & ATA_FLAG_SKIP_D2H_BSY) - ata_wait_spinup(ap); - } + /* handle link resume & hotplug spinup */ + if ((ehc->i.flags & ATA_EHI_RESUME_LINK) && + (ap->flags & ATA_FLAG_HRST_TO_RESUME)) + ehc->i.action |= ATA_EH_HARDRESET; + + if ((ehc->i.flags & ATA_EHI_HOTPLUGGED) && + (ap->flags & ATA_FLAG_SKIP_D2H_BSY)) + ata_wait_spinup(ap); /* if we're about to do hardreset, nothing more to do */ if (ehc->i.action & ATA_EH_HARDRESET) @@ -2632,11 +2643,6 @@ int ata_std_prereset(struct ata_port *ap) /* if SATA, resume phy */ if (ap->cbl == ATA_CBL_SATA) { - if (ap->flags & ATA_FLAG_LOADING) - timing = sata_deb_timing_boot; - else - timing = sata_deb_timing_eh; - rc = sata_phy_resume(ap, timing); if (rc && rc != -EOPNOTSUPP) { /* phy resume failed */ @@ -2724,6 +2730,8 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) */ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) { + struct ata_eh_context *ehc = &ap->eh_context; + const unsigned long *timing = sata_ehc_deb_timing(ehc); u32 scontrol; int rc; @@ -2761,7 +2769,7 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) msleep(1); /* bring phy back */ - sata_phy_resume(ap, sata_deb_timing_eh); + sata_phy_resume(ap, timing); /* TODO: phy layer with polling, timeouts, etc. */ if (ata_port_offline(ap)) { @@ -4285,7 +4293,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) unsigned int i; /* no command while frozen */ - if (unlikely(ap->flags & ATA_FLAG_FROZEN)) + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; /* the last tag is reserved for internal command. */ @@ -4407,7 +4415,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) * taken care of. */ if (ap->ops->error_handler) { - WARN_ON(ap->flags & ATA_FLAG_FROZEN); + WARN_ON(ap->pflags & ATA_PFLAG_FROZEN); if (unlikely(qc->err_mask)) qc->flags |= ATA_QCFLAG_FAILED; @@ -5001,86 +5009,120 @@ int ata_flush_cache(struct ata_device *dev) return 0; } -static int ata_standby_drive(struct ata_device *dev) +static int ata_host_set_request_pm(struct ata_host_set *host_set, + pm_message_t mesg, unsigned int action, + unsigned int ehi_flags, int wait) { - unsigned int err_mask; + unsigned long flags; + int i, rc; - err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to standby drive " - "(err_mask=0x%x)\n", err_mask); - return -EIO; - } + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; - return 0; -} + /* Previous resume operation might still be in + * progress. Wait for PM_PENDING to clear. + */ + if (ap->pflags & ATA_PFLAG_PM_PENDING) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + } -static int ata_start_drive(struct ata_device *dev) -{ - unsigned int err_mask; + /* request PM ops to EH */ + spin_lock_irqsave(ap->lock, flags); - err_mask = ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE); - if (err_mask) { - ata_dev_printk(dev, KERN_ERR, "failed to start drive " - "(err_mask=0x%x)\n", err_mask); - return -EIO; + ap->pm_mesg = mesg; + if (wait) { + rc = 0; + ap->pm_result = &rc; + } + + ap->pflags |= ATA_PFLAG_PM_PENDING; + ap->eh_info.action |= action; + ap->eh_info.flags |= ehi_flags; + + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait and check result */ + if (wait) { + ata_port_wait_eh(ap); + WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); + if (rc) + return rc; + } } return 0; } /** - * ata_device_resume - wakeup a previously suspended devices - * @dev: the device to resume + * ata_host_set_suspend - suspend host_set + * @host_set: host_set to suspend + * @mesg: PM message * - * Kick the drive back into action, by sending it an idle immediate - * command and making sure its transfer mode matches between drive - * and host. + * Suspend @host_set. Actual operation is performed by EH. This + * function requests EH to perform PM operations and waits for EH + * to finish. * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno on failure. */ -int ata_device_resume(struct ata_device *dev) +int ata_host_set_suspend(struct ata_host_set *host_set, pm_message_t mesg) { - struct ata_port *ap = dev->ap; + int i, j, rc; - if (ap->flags & ATA_FLAG_SUSPENDED) { - struct ata_device *failed_dev; + rc = ata_host_set_request_pm(host_set, mesg, 0, ATA_EHI_QUIET, 1); + if (rc) + goto fail; - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); - ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000); + /* EH is quiescent now. Fail if we have any ready device. + * This happens if hotplug occurs between completion of device + * suspension and here. + */ + for (i = 0; i < host_set->n_ports; i++) { + struct ata_port *ap = host_set->ports[i]; - ap->flags &= ~ATA_FLAG_SUSPENDED; - while (ata_set_mode(ap, &failed_dev)) - ata_dev_disable(failed_dev); + for (j = 0; j < ATA_MAX_DEVICES; j++) { + struct ata_device *dev = &ap->device[j]; + + if (ata_dev_ready(dev)) { + ata_port_printk(ap, KERN_WARNING, + "suspend failed, device %d " + "still active\n", dev->devno); + rc = -EBUSY; + goto fail; + } + } } - if (!ata_dev_enabled(dev)) - return 0; - if (dev->class == ATA_DEV_ATA) - ata_start_drive(dev); + host_set->dev->power.power_state = mesg; return 0; + + fail: + ata_host_set_resume(host_set); + return rc; } /** - * ata_device_suspend - prepare a device for suspend - * @dev: the device to suspend - * @state: target power management state + * ata_host_set_resume - resume host_set + * @host_set: host_set to resume + * + * Resume @host_set. Actual operation is performed by EH. This + * function requests EH to perform PM operations and returns. + * Note that all resume operations are performed parallely. * - * Flush the cache on the drive, if appropriate, then issue a - * standbynow command. + * LOCKING: + * Kernel thread context (may sleep). */ -int ata_device_suspend(struct ata_device *dev, pm_message_t state) +void ata_host_set_resume(struct ata_host_set *host_set) { - struct ata_port *ap = dev->ap; - - if (!ata_dev_enabled(dev)) - return 0; - if (dev->class == ATA_DEV_ATA) - ata_flush_cache(dev); - - if (state.event != PM_EVENT_FREEZE) - ata_standby_drive(dev); - ap->flags |= ATA_FLAG_SUSPENDED; - return 0; + ata_host_set_request_pm(host_set, PMSG_ON, ATA_EH_SOFTRESET, + ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); + host_set->dev->power.power_state = PMSG_ON; } /** @@ -5440,6 +5482,7 @@ int ata_device_add(const struct ata_probe_ent *ent) } if (ap->ops->error_handler) { + struct ata_eh_info *ehi = &ap->eh_info; unsigned long flags; ata_port_probe(ap); @@ -5447,10 +5490,11 @@ int ata_device_add(const struct ata_probe_ent *ent) /* kick EH for boot probing */ spin_lock_irqsave(ap->lock, flags); - ap->eh_info.probe_mask = (1 << ATA_MAX_DEVICES) - 1; - ap->eh_info.action |= ATA_EH_SOFTRESET; + ehi->probe_mask = (1 << ATA_MAX_DEVICES) - 1; + ehi->action |= ATA_EH_SOFTRESET; + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; - ap->flags |= ATA_FLAG_LOADING; + ap->pflags |= ATA_PFLAG_LOADING; ata_port_schedule_eh(ap); spin_unlock_irqrestore(ap->lock, flags); @@ -5518,7 +5562,7 @@ void ata_port_detach(struct ata_port *ap) /* tell EH we're leaving & flush EH */ spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_UNLOADING; + ap->pflags |= ATA_PFLAG_UNLOADING; spin_unlock_irqrestore(ap->lock, flags); ata_port_wait_eh(ap); @@ -5723,20 +5767,55 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) return (tmp == bits->val) ? 1 : 0; } -int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) +void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state) { pci_save_state(pdev); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - return 0; + + if (state.event == PM_EVENT_SUSPEND) { + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + } } -int ata_pci_device_resume(struct pci_dev *pdev) +void ata_pci_device_do_resume(struct pci_dev *pdev) { pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); pci_enable_device(pdev); pci_set_master(pdev); +} + +int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + int rc = 0; + + rc = ata_host_set_suspend(host_set, state); + if (rc) + return rc; + + if (host_set->next) { + rc = ata_host_set_suspend(host_set->next, state); + if (rc) { + ata_host_set_resume(host_set); + return rc; + } + } + + ata_pci_device_do_suspend(pdev, state); + + return 0; +} + +int ata_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + + ata_pci_device_do_resume(pdev); + ata_host_set_resume(host_set); + if (host_set->next) + ata_host_set_resume(host_set->next); + return 0; } #endif /* CONFIG_PCI */ @@ -5842,9 +5921,9 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, * Do not depend on ABI/API stability. */ -EXPORT_SYMBOL_GPL(sata_deb_timing_boot); -EXPORT_SYMBOL_GPL(sata_deb_timing_eh); -EXPORT_SYMBOL_GPL(sata_deb_timing_before_fsrst); +EXPORT_SYMBOL_GPL(sata_deb_timing_normal); +EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug); +EXPORT_SYMBOL_GPL(sata_deb_timing_long); EXPORT_SYMBOL_GPL(ata_std_bios_param); EXPORT_SYMBOL_GPL(ata_std_ports); EXPORT_SYMBOL_GPL(ata_device_add); @@ -5916,6 +5995,8 @@ EXPORT_SYMBOL_GPL(sata_scr_write); EXPORT_SYMBOL_GPL(sata_scr_write_flush); EXPORT_SYMBOL_GPL(ata_port_online); EXPORT_SYMBOL_GPL(ata_port_offline); +EXPORT_SYMBOL_GPL(ata_host_set_suspend); +EXPORT_SYMBOL_GPL(ata_host_set_resume); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); @@ -5930,14 +6011,14 @@ EXPORT_SYMBOL_GPL(ata_pci_host_stop); EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); +EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); EXPORT_SYMBOL_GPL(ata_pci_device_suspend); EXPORT_SYMBOL_GPL(ata_pci_device_resume); EXPORT_SYMBOL_GPL(ata_pci_default_filter); EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ -EXPORT_SYMBOL_GPL(ata_device_suspend); -EXPORT_SYMBOL_GPL(ata_device_resume); EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); EXPORT_SYMBOL_GPL(ata_scsi_device_resume); diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c index bf5a72aca8a..4b6aa30f4d6 100644 --- a/drivers/scsi/libata-eh.c +++ b/drivers/scsi/libata-eh.c @@ -47,6 +47,8 @@ static void __ata_port_freeze(struct ata_port *ap); static void ata_eh_finish(struct ata_port *ap); +static void ata_eh_handle_port_suspend(struct ata_port *ap); +static void ata_eh_handle_port_resume(struct ata_port *ap); static void ata_ering_record(struct ata_ering *ering, int is_io, unsigned int err_mask) @@ -190,7 +192,6 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd) void ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap = ata_shost_to_port(host); - spinlock_t *ap_lock = ap->lock; int i, repeat_cnt = ATA_EH_MAX_REPEAT; unsigned long flags; @@ -217,7 +218,7 @@ void ata_scsi_error(struct Scsi_Host *host) struct scsi_cmnd *scmd, *tmp; int nr_timedout = 0; - spin_lock_irqsave(ap_lock, flags); + spin_lock_irqsave(ap->lock, flags); list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) { struct ata_queued_cmd *qc; @@ -256,43 +257,49 @@ void ata_scsi_error(struct Scsi_Host *host) if (nr_timedout) __ata_port_freeze(ap); - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } else - spin_unlock_wait(ap_lock); + spin_unlock_wait(ap->lock); repeat: /* invoke error handler */ if (ap->ops->error_handler) { + /* process port resume request */ + ata_eh_handle_port_resume(ap); + /* fetch & clear EH info */ - spin_lock_irqsave(ap_lock, flags); + spin_lock_irqsave(ap->lock, flags); memset(&ap->eh_context, 0, sizeof(ap->eh_context)); ap->eh_context.i = ap->eh_info; memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - ap->flags |= ATA_FLAG_EH_IN_PROGRESS; - ap->flags &= ~ATA_FLAG_EH_PENDING; + ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; + ap->pflags &= ~ATA_PFLAG_EH_PENDING; - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); - /* invoke EH. if unloading, just finish failed qcs */ - if (!(ap->flags & ATA_FLAG_UNLOADING)) + /* invoke EH, skip if unloading or suspended */ + if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED))) ap->ops->error_handler(ap); else ata_eh_finish(ap); + /* process port suspend request */ + ata_eh_handle_port_suspend(ap); + /* Exception might have happend after ->error_handler * recovered the port but before this point. Repeat * EH in such case. */ - spin_lock_irqsave(ap_lock, flags); + spin_lock_irqsave(ap->lock, flags); - if (ap->flags & ATA_FLAG_EH_PENDING) { + if (ap->pflags & ATA_PFLAG_EH_PENDING) { if (--repeat_cnt) { ata_port_printk(ap, KERN_INFO, "EH pending after completion, " "repeating EH (cnt=%d)\n", repeat_cnt); - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); goto repeat; } ata_port_printk(ap, KERN_ERR, "EH pending after %d " @@ -302,14 +309,14 @@ void ata_scsi_error(struct Scsi_Host *host) /* this run is complete, make sure EH info is clear */ memset(&ap->eh_info, 0, sizeof(ap->eh_info)); - /* Clear host_eh_scheduled while holding ap_lock such + /* Clear host_eh_scheduled while holding ap->lock such * that if exception occurs after this point but * before EH completion, SCSI midlayer will * re-initiate EH. */ host->host_eh_scheduled = 0; - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); } else { WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL); ap->ops->eng_timeout(ap); @@ -321,24 +328,23 @@ void ata_scsi_error(struct Scsi_Host *host) scsi_eh_flush_done_q(&ap->eh_done_q); /* clean up */ - spin_lock_irqsave(ap_lock, flags); + spin_lock_irqsave(ap->lock, flags); - if (ap->flags & ATA_FLAG_LOADING) { - ap->flags &= ~ATA_FLAG_LOADING; - } else { - if (ap->flags & ATA_FLAG_SCSI_HOTPLUG) - queue_work(ata_aux_wq, &ap->hotplug_task); - if (ap->flags & ATA_FLAG_RECOVERED) - ata_port_printk(ap, KERN_INFO, "EH complete\n"); - } + if (ap->pflags & ATA_PFLAG_LOADING) + ap->pflags &= ~ATA_PFLAG_LOADING; + else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) + queue_work(ata_aux_wq, &ap->hotplug_task); + + if (ap->pflags & ATA_PFLAG_RECOVERED) + ata_port_printk(ap, KERN_INFO, "EH complete\n"); - ap->flags &= ~(ATA_FLAG_SCSI_HOTPLUG | ATA_FLAG_RECOVERED); + ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED); /* tell wait_eh that we're done */ - ap->flags &= ~ATA_FLAG_EH_IN_PROGRESS; + ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS; wake_up_all(&ap->eh_wait_q); - spin_unlock_irqrestore(ap_lock, flags); + spin_unlock_irqrestore(ap->lock, flags); DPRINTK("EXIT\n"); } @@ -360,7 +366,7 @@ void ata_port_wait_eh(struct ata_port *ap) retry: spin_lock_irqsave(ap->lock, flags); - while (ap->flags & (ATA_FLAG_EH_PENDING | ATA_FLAG_EH_IN_PROGRESS)) { + while (ap->pflags & (ATA_PFLAG_EH_PENDING | ATA_PFLAG_EH_IN_PROGRESS)) { prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE); spin_unlock_irqrestore(ap->lock, flags); schedule(); @@ -489,7 +495,7 @@ void ata_qc_schedule_eh(struct ata_queued_cmd *qc) WARN_ON(!ap->ops->error_handler); qc->flags |= ATA_QCFLAG_FAILED; - qc->ap->flags |= ATA_FLAG_EH_PENDING; + qc->ap->pflags |= ATA_PFLAG_EH_PENDING; /* The following will fail if timeout has already expired. * ata_scsi_error() takes care of such scmds on EH entry. @@ -513,7 +519,7 @@ void ata_port_schedule_eh(struct ata_port *ap) { WARN_ON(!ap->ops->error_handler); - ap->flags |= ATA_FLAG_EH_PENDING; + ap->pflags |= ATA_PFLAG_EH_PENDING; scsi_schedule_eh(ap->host); DPRINTK("port EH scheduled\n"); @@ -578,7 +584,7 @@ static void __ata_port_freeze(struct ata_port *ap) if (ap->ops->freeze) ap->ops->freeze(ap); - ap->flags |= ATA_FLAG_FROZEN; + ap->pflags |= ATA_PFLAG_FROZEN; DPRINTK("ata%u port frozen\n", ap->id); } @@ -646,7 +652,7 @@ void ata_eh_thaw_port(struct ata_port *ap) spin_lock_irqsave(ap->lock, flags); - ap->flags &= ~ATA_FLAG_FROZEN; + ap->pflags &= ~ATA_PFLAG_FROZEN; if (ap->ops->thaw) ap->ops->thaw(ap); @@ -731,7 +737,7 @@ static void ata_eh_detach_dev(struct ata_device *dev) if (ata_scsi_offline_dev(dev)) { dev->flags |= ATA_DFLAG_DETACHED; - ap->flags |= ATA_FLAG_SCSI_HOTPLUG; + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; } /* clear per-dev EH actions */ @@ -760,8 +766,12 @@ static void ata_eh_about_to_do(struct ata_port *ap, struct ata_device *dev, unsigned long flags; spin_lock_irqsave(ap->lock, flags); + ata_eh_clear_action(dev, &ap->eh_info, action); - ap->flags |= ATA_FLAG_RECOVERED; + + if (!(ap->eh_context.i.flags & ATA_EHI_QUIET)) + ap->pflags |= ATA_PFLAG_RECOVERED; + spin_unlock_irqrestore(ap->lock, flags); } @@ -1027,7 +1037,7 @@ static void ata_eh_analyze_ncq_error(struct ata_port *ap) int tag, rc; /* if frozen, we can't do much */ - if (ap->flags & ATA_FLAG_FROZEN) + if (ap->pflags & ATA_PFLAG_FROZEN) return; /* is it NCQ device error? */ @@ -1275,6 +1285,9 @@ static void ata_eh_autopsy(struct ata_port *ap) DPRINTK("ENTER\n"); + if (ehc->i.flags & ATA_EHI_NO_AUTOPSY) + return; + /* obtain and analyze SError */ rc = sata_scr_read(ap, SCR_ERROR, &serror); if (rc == 0) { @@ -1327,7 +1340,7 @@ static void ata_eh_autopsy(struct ata_port *ap) } /* enforce default EH actions */ - if (ap->flags & ATA_FLAG_FROZEN || + if (ap->pflags & ATA_PFLAG_FROZEN || all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT)) action |= ATA_EH_SOFTRESET; else if (all_err_mask) @@ -1346,7 +1359,7 @@ static void ata_eh_autopsy(struct ata_port *ap) /* record autopsy result */ ehc->i.dev = failed_dev; - ehc->i.action = action; + ehc->i.action |= action; DPRINTK("EXIT\n"); } @@ -1385,7 +1398,7 @@ static void ata_eh_report(struct ata_port *ap) return; frozen = ""; - if (ap->flags & ATA_FLAG_FROZEN) + if (ap->pflags & ATA_PFLAG_FROZEN) frozen = " frozen"; if (ehc->i.dev) { @@ -1465,7 +1478,7 @@ static int ata_eh_reset(struct ata_port *ap, int classify, struct ata_eh_context *ehc = &ap->eh_context; unsigned int *classes = ehc->classes; int tries = ATA_EH_RESET_TRIES; - int verbose = !(ap->flags & ATA_FLAG_LOADING); + int verbose = !(ehc->i.flags & ATA_EHI_QUIET); unsigned int action; ata_reset_fn_t reset; int i, did_followup_srst, rc; @@ -1605,7 +1618,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, dev = &ap->device[i]; action = ata_eh_dev_action(dev); - if (action & ATA_EH_REVALIDATE && ata_dev_enabled(dev)) { + if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) { if (ata_port_offline(ap)) { rc = -EIO; break; @@ -1636,7 +1649,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, } spin_lock_irqsave(ap->lock, flags); - ap->flags |= ATA_FLAG_SCSI_HOTPLUG; + ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; spin_unlock_irqrestore(ap->lock, flags); } } @@ -1648,6 +1661,164 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap, return rc; } +/** + * ata_eh_suspend - handle suspend EH action + * @ap: target host port + * @r_failed_dev: result parameter to indicate failing device + * + * Handle suspend EH action. Disk devices are spinned down and + * other types of devices are just marked suspended. Once + * suspended, no EH action to the device is allowed until it is + * resumed. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + struct ata_device *dev; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned long flags; + unsigned int action, err_mask; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND)) + continue; + + WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED); + + ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND); + + if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { + /* flush cache */ + rc = ata_flush_cache(dev); + if (rc) + break; + + /* spin down */ + err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to " + "spin down (err_mask=0x%x)\n", + err_mask); + rc = -EIO; + break; + } + } + + spin_lock_irqsave(ap->lock, flags); + dev->flags |= ATA_DFLAG_SUSPENDED; + spin_unlock_irqrestore(ap->lock, flags); + + ata_eh_done(ap, dev, ATA_EH_SUSPEND); + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return 0; +} + +/** + * ata_eh_prep_resume - prep for resume EH action + * @ap: target host port + * + * Clear SUSPENDED in preparation for scheduled resume actions. + * This allows other parts of EH to access the devices being + * resumed. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_prep_resume(struct ata_port *ap) +{ + struct ata_device *dev; + unsigned long flags; + int i; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int action; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) + continue; + + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_SUSPENDED; + spin_unlock_irqrestore(ap->lock, flags); + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_eh_resume - handle resume EH action + * @ap: target host port + * @r_failed_dev: result parameter to indicate failing device + * + * Handle resume EH action. Target devices are already reset and + * revalidated. Spinning up is the only operation left. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev) +{ + struct ata_device *dev; + int i, rc = 0; + + DPRINTK("ENTER\n"); + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + unsigned int action, err_mask; + + dev = &ap->device[i]; + action = ata_eh_dev_action(dev); + + if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME)) + continue; + + ata_eh_about_to_do(ap, dev, ATA_EH_RESUME); + + if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) { + err_mask = ata_do_simple_cmd(dev, + ATA_CMD_IDLEIMMEDIATE); + if (err_mask) { + ata_dev_printk(dev, KERN_ERR, "failed to " + "spin up (err_mask=0x%x)\n", + err_mask); + rc = -EIO; + break; + } + } + + ata_eh_done(ap, dev, ATA_EH_RESUME); + } + + if (rc) + *r_failed_dev = dev; + + DPRINTK("EXIT\n"); + return 0; +} + static int ata_port_nr_enabled(struct ata_port *ap) { int i, cnt = 0; @@ -1673,7 +1844,19 @@ static int ata_eh_skip_recovery(struct ata_port *ap) struct ata_eh_context *ehc = &ap->eh_context; int i; - if (ap->flags & ATA_FLAG_FROZEN || ata_port_nr_enabled(ap)) + /* skip if all possible devices are suspended */ + for (i = 0; i < ata_port_max_devices(ap); i++) { + struct ata_device *dev = &ap->device[i]; + + if (ata_dev_absent(dev) || ata_dev_ready(dev)) + break; + } + + if (i == ata_port_max_devices(ap)) + return 1; + + /* always thaw frozen port and recover failed devices */ + if (ap->pflags & ATA_PFLAG_FROZEN || ata_port_nr_enabled(ap)) return 0; /* skip if class codes for all vacant slots are ATA_DEV_NONE */ @@ -1744,9 +1927,12 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, rc = 0; /* if UNLOADING, finish immediately */ - if (ap->flags & ATA_FLAG_UNLOADING) + if (ap->pflags & ATA_PFLAG_UNLOADING) goto out; + /* prep for resume */ + ata_eh_prep_resume(ap); + /* skip EH if possible. */ if (ata_eh_skip_recovery(ap)) ehc->i.action = 0; @@ -1774,6 +1960,11 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, if (rc) goto dev_fail; + /* resume devices */ + rc = ata_eh_resume(ap, &dev); + if (rc) + goto dev_fail; + /* configure transfer mode if the port has been reset */ if (ehc->i.flags & ATA_EHI_DID_RESET) { rc = ata_set_mode(ap, &dev); @@ -1783,6 +1974,11 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, } } + /* suspend devices */ + rc = ata_eh_suspend(ap, &dev); + if (rc) + goto dev_fail; + goto out; dev_fail: @@ -1908,11 +2104,124 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - if (!(ap->flags & ATA_FLAG_LOADING)) { - ata_eh_autopsy(ap); - ata_eh_report(ap); - } - + ata_eh_autopsy(ap); + ata_eh_report(ap); ata_eh_recover(ap, prereset, softreset, hardreset, postreset); ata_eh_finish(ap); } + +/** + * ata_eh_handle_port_suspend - perform port suspend operation + * @ap: port to suspend + * + * Suspend @ap. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_handle_port_suspend(struct ata_port *ap) +{ + unsigned long flags; + int rc = 0; + + /* are we suspending? */ + spin_lock_irqsave(ap->lock, flags); + if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || + ap->pm_mesg.event == PM_EVENT_ON) { + spin_unlock_irqrestore(ap->lock, flags); + return; + } + spin_unlock_irqrestore(ap->lock, flags); + + WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED); + + /* suspend */ + ata_eh_freeze_port(ap); + + if (ap->ops->port_suspend) + rc = ap->ops->port_suspend(ap, ap->pm_mesg); + + /* report result */ + spin_lock_irqsave(ap->lock, flags); + + ap->pflags &= ~ATA_PFLAG_PM_PENDING; + if (rc == 0) + ap->pflags |= ATA_PFLAG_SUSPENDED; + else + ata_port_schedule_eh(ap); + + if (ap->pm_result) { + *ap->pm_result = rc; + ap->pm_result = NULL; + } + + spin_unlock_irqrestore(ap->lock, flags); + + return; +} + +/** + * ata_eh_handle_port_resume - perform port resume operation + * @ap: port to resume + * + * Resume @ap. + * + * This function also waits upto one second until all devices + * hanging off this port requests resume EH action. This is to + * prevent invoking EH and thus reset multiple times on resume. + * + * On DPM resume, where some of devices might not be resumed + * together, this may delay port resume upto one second, but such + * DPM resumes are rare and 1 sec delay isn't too bad. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_eh_handle_port_resume(struct ata_port *ap) +{ + unsigned long timeout; + unsigned long flags; + int i, rc = 0; + + /* are we resuming? */ + spin_lock_irqsave(ap->lock, flags); + if (!(ap->pflags & ATA_PFLAG_PM_PENDING) || + ap->pm_mesg.event != PM_EVENT_ON) { + spin_unlock_irqrestore(ap->lock, flags); + return; + } + spin_unlock_irqrestore(ap->lock, flags); + + /* spurious? */ + if (!(ap->pflags & ATA_PFLAG_SUSPENDED)) + goto done; + + if (ap->ops->port_resume) + rc = ap->ops->port_resume(ap); + + /* give devices time to request EH */ + timeout = jiffies + HZ; /* 1s max */ + while (1) { + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned int action = ata_eh_dev_action(dev); + + if ((dev->flags & ATA_DFLAG_SUSPENDED) && + !(action & ATA_EH_RESUME)) + break; + } + + if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout)) + break; + msleep(10); + } + + done: + spin_lock_irqsave(ap->lock, flags); + ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED); + if (ap->pm_result) { + *ap->pm_result = rc; + ap->pm_result = NULL; + } + spin_unlock_irqrestore(ap->lock, flags); +} diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 2915bca691e..7ced41ecde8 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -397,20 +397,129 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) } } -int ata_scsi_device_resume(struct scsi_device *sdev) +/** + * ata_scsi_device_suspend - suspend ATA device associated with sdev + * @sdev: the SCSI device to suspend + * @state: target power management state + * + * Request suspend EH action on the ATA device associated with + * @sdev and wait for the operation to complete. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) { struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + unsigned long flags; + unsigned int action; + int rc = 0; + + if (!dev) + goto out; + + spin_lock_irqsave(ap->lock, flags); + + /* wait for the previous resume to complete */ + while (dev->flags & ATA_DFLAG_SUSPENDED) { + spin_unlock_irqrestore(ap->lock, flags); + ata_port_wait_eh(ap); + spin_lock_irqsave(ap->lock, flags); + } + + /* if @sdev is already detached, nothing to do */ + if (sdev->sdev_state == SDEV_OFFLINE || + sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) + goto out_unlock; + + /* request suspend */ + action = ATA_EH_SUSPEND; + if (state.event != PM_EVENT_SUSPEND) + action |= ATA_EH_PM_FREEZE; + ap->eh_info.dev_action[dev->devno] |= action; + ap->eh_info.flags |= ATA_EHI_QUIET; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait for EH to do the job */ + ata_port_wait_eh(ap); + + spin_lock_irqsave(ap->lock, flags); + + /* If @sdev is still attached but the associated ATA device + * isn't suspended, the operation failed. + */ + if (sdev->sdev_state != SDEV_OFFLINE && + sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL && + !(dev->flags & ATA_DFLAG_SUSPENDED)) + rc = -EIO; - return ata_device_resume(dev); + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + out: + if (rc == 0) + sdev->sdev_gendev.power.power_state = state; + return rc; } -int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state) +/** + * ata_scsi_device_resume - resume ATA device associated with sdev + * @sdev: the SCSI device to resume + * + * Request resume EH action on the ATA device associated with + * @sdev and return immediately. This enables parallel + * wakeup/spinup of devices. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0. + */ +int ata_scsi_device_resume(struct scsi_device *sdev) { struct ata_port *ap = ata_shost_to_port(sdev->host); - struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + struct ata_eh_info *ehi = &ap->eh_info; + unsigned long flags; + unsigned int action; + + if (!dev) + goto out; + + spin_lock_irqsave(ap->lock, flags); + + /* if @sdev is already detached, nothing to do */ + if (sdev->sdev_state == SDEV_OFFLINE || + sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) + goto out_unlock; - return ata_device_suspend(dev, state); + /* request resume */ + action = ATA_EH_RESUME; + if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND) + __ata_ehi_hotplugged(ehi); + else + action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET; + ehi->dev_action[dev->devno] |= action; + + /* We don't want autopsy and verbose EH messages. Disable + * those if we're the only device on this link. + */ + if (ata_port_max_devices(ap) == 1) + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + + ata_port_schedule_eh(ap); + + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + out: + sdev->sdev_gendev.power.power_state = PMSG_ON; + return 0; } /** @@ -2930,7 +3039,7 @@ void ata_scsi_hotplug(void *data) struct ata_port *ap = data; int i; - if (ap->flags & ATA_FLAG_UNLOADING) { + if (ap->pflags & ATA_PFLAG_UNLOADING) { DPRINTK("ENTER/EXIT - unloading\n"); return; } @@ -3011,6 +3120,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, if (dev) { ap->eh_info.probe_mask |= 1 << dev->devno; ap->eh_info.action |= ATA_EH_SOFTRESET; + ap->eh_info.flags |= ATA_EHI_RESUME_LINK; } else rc = -EINVAL; } diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index 7aabb45c35e..d0a85073ebf 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -109,6 +109,7 @@ enum { }; static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); +static int sil_pci_device_resume(struct pci_dev *pdev); static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); @@ -160,6 +161,8 @@ static struct pci_driver sil_pci_driver = { .id_table = sil_pci_tbl, .probe = sil_init_one, .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = sil_pci_device_resume, }; static struct scsi_host_template sil_sht = { @@ -178,6 +181,8 @@ static struct scsi_host_template sil_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, }; static const struct ata_port_operations sil_ops = { @@ -370,7 +375,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2) * during hardreset makes controllers with broken SIEN * repeat probing needlessly. */ - if (!(ap->flags & ATA_FLAG_FROZEN)) { + if (!(ap->pflags & ATA_PFLAG_FROZEN)) { ata_ehi_hotplugged(&ap->eh_info); ap->eh_info.serror |= serror; } @@ -561,6 +566,52 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) } } +static void sil_init_controller(struct pci_dev *pdev, + int n_ports, unsigned long host_flags, + void __iomem *mmio_base) +{ + u8 cls; + u32 tmp; + int i; + + /* Initialize FIFO PCI bus arbitration */ + cls = sil_get_device_cache_line(pdev); + if (cls) { + cls >>= 3; + cls++; /* cls = (line_size/8)+1 */ + for (i = 0; i < n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); + } else + dev_printk(KERN_WARNING, &pdev->dev, + "cache line size not set. Driver may not function\n"); + + /* Apply R_ERR on DMA activate FIS errata workaround */ + if (host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { + int cnt; + + for (i = 0, cnt = 0; i < n_ports; i++) { + tmp = readl(mmio_base + sil_port[i].sfis_cfg); + if ((tmp & 0x3) != 0x01) + continue; + if (!cnt) + dev_printk(KERN_INFO, &pdev->dev, + "Applying R_ERR on DMA activate " + "FIS errata fix\n"); + writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); + cnt++; + } + } + + if (n_ports == 4) { + /* flip the magic "make 4 ports work" bit */ + tmp = readl(mmio_base + sil_port[2].bmdma); + if ((tmp & SIL_INTR_STEERING) == 0) + writel(tmp | SIL_INTR_STEERING, + mmio_base + sil_port[2].bmdma); + } +} + static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -570,8 +621,6 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) int rc; unsigned int i; int pci_dev_busy = 0; - u32 tmp; - u8 cls; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -630,42 +679,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ata_std_ports(&probe_ent->port[i]); } - /* Initialize FIFO PCI bus arbitration */ - cls = sil_get_device_cache_line(pdev); - if (cls) { - cls >>= 3; - cls++; /* cls = (line_size/8)+1 */ - for (i = 0; i < probe_ent->n_ports; i++) - writew(cls << 8 | cls, - mmio_base + sil_port[i].fifo_cfg); - } else - dev_printk(KERN_WARNING, &pdev->dev, - "cache line size not set. Driver may not function\n"); - - /* Apply R_ERR on DMA activate FIS errata workaround */ - if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) { - int cnt; - - for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) { - tmp = readl(mmio_base + sil_port[i].sfis_cfg); - if ((tmp & 0x3) != 0x01) - continue; - if (!cnt) - dev_printk(KERN_INFO, &pdev->dev, - "Applying R_ERR on DMA activate " - "FIS errata fix\n"); - writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); - cnt++; - } - } - - if (ent->driver_data == sil_3114) { - /* flip the magic "make 4 ports work" bit */ - tmp = readl(mmio_base + sil_port[2].bmdma); - if ((tmp & SIL_INTR_STEERING) == 0) - writel(tmp | SIL_INTR_STEERING, - mmio_base + sil_port[2].bmdma); - } + sil_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + mmio_base); pci_set_master(pdev); @@ -685,6 +700,18 @@ err_out: return rc; } +static int sil_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + + ata_pci_device_do_resume(pdev); + sil_init_controller(pdev, host_set->n_ports, host_set->ports[0]->flags, + host_set->mmio_base); + ata_host_set_resume(host_set); + + return 0; +} + static int __init sil_init(void) { return pci_module_init(&sil_pci_driver); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 07a1c6a8a41..2e0f4a4076a 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -92,6 +92,7 @@ enum { HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */ HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */ HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */ + HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */ /* * Port registers @@ -338,6 +339,7 @@ static int sil24_port_start(struct ata_port *ap); static void sil24_port_stop(struct ata_port *ap); static void sil24_host_stop(struct ata_host_set *host_set); static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int sil24_pci_device_resume(struct pci_dev *pdev); static const struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, @@ -353,6 +355,8 @@ static struct pci_driver sil24_pci_driver = { .id_table = sil24_pci_tbl, .probe = sil24_init_one, .remove = ata_pci_remove_one, /* safe? */ + .suspend = ata_pci_device_suspend, + .resume = sil24_pci_device_resume, }; static struct scsi_host_template sil24_sht = { @@ -372,6 +376,8 @@ static struct scsi_host_template sil24_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, }; static const struct ata_port_operations sil24_ops = { @@ -607,7 +613,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class) /* SStatus oscillates between zero and valid status after * DEV_RST, debounce it. */ - rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst); + rc = sata_phy_debounce(ap, sata_deb_timing_long); if (rc) { reason = "PHY debouncing failed"; goto err; @@ -988,6 +994,64 @@ static void sil24_host_stop(struct ata_host_set *host_set) kfree(hpriv); } +static void sil24_init_controller(struct pci_dev *pdev, int n_ports, + unsigned long host_flags, + void __iomem *host_base, + void __iomem *port_base) +{ + u32 tmp; + int i; + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* clear global reset & mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + /* init ports */ + for (i = 0; i < n_ports; i++) { + void __iomem *port = port_base + i * PORT_REGS_SIZE; + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + tmp = ata_wait_register(port + PORT_CTRL_STAT, + PORT_CS_PORT_RST, + PORT_CS_PORT_RST, 10, 100); + if (tmp & PORT_CS_PORT_RST) + dev_printk(KERN_ERR, &pdev->dev, + "failed to clear port RST\n"); + } + + /* Configure IRQ WoC */ + if (host_flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); + else + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* Zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* Always use 64bit activation */ + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); + + /* Clear port multiplier enable and resume bits */ + writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); +} + static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; @@ -1076,9 +1140,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } - /* GPIO off */ - writel(0, host_base + HOST_FLASH_CMD); - /* Apply workaround for completion IRQ loss on PCI-X errata */ if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) { tmp = readl(host_base + HOST_CTRL); @@ -1090,56 +1151,18 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC; } - /* clear global reset & mask interrupts during initialization */ - writel(0, host_base + HOST_CTRL); - for (i = 0; i < probe_ent->n_ports; i++) { - void __iomem *port = port_base + i * PORT_REGS_SIZE; - unsigned long portu = (unsigned long)port; + unsigned long portu = + (unsigned long)port_base + i * PORT_REGS_SIZE; probe_ent->port[i].cmd_addr = portu; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); - - /* Initial PHY setting */ - writel(0x20c, port + PORT_PHY_CFG); - - /* Clear port RST */ - tmp = readl(port + PORT_CTRL_STAT); - if (tmp & PORT_CS_PORT_RST) { - writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); - tmp = ata_wait_register(port + PORT_CTRL_STAT, - PORT_CS_PORT_RST, - PORT_CS_PORT_RST, 10, 100); - if (tmp & PORT_CS_PORT_RST) - dev_printk(KERN_ERR, &pdev->dev, - "failed to clear port RST\n"); - } - - /* Configure IRQ WoC */ - if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT); - else - writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); - - /* Zero error counters. */ - writel(0x8000, port + PORT_DECODE_ERR_THRESH); - writel(0x8000, port + PORT_CRC_ERR_THRESH); - writel(0x8000, port + PORT_HSHK_ERR_THRESH); - writel(0x0000, port + PORT_DECODE_ERR_CNT); - writel(0x0000, port + PORT_CRC_ERR_CNT); - writel(0x0000, port + PORT_HSHK_ERR_CNT); - - /* Always use 64bit activation */ - writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR); - - /* Clear port multiplier enable and resume bits */ - writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); } - /* Turn on interrupts */ - writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); + sil24_init_controller(pdev, probe_ent->n_ports, probe_ent->host_flags, + host_base, port_base); pci_set_master(pdev); @@ -1162,6 +1185,25 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } +static int sil24_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host_set *host_set = dev_get_drvdata(&pdev->dev); + struct sil24_host_priv *hpriv = host_set->private_data; + + ata_pci_device_do_resume(pdev); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) + writel(HOST_CTRL_GLOBAL_RST, hpriv->host_base + HOST_CTRL); + + sil24_init_controller(pdev, host_set->n_ports, + host_set->ports[0]->flags, + hpriv->host_base, hpriv->port_base); + + ata_host_set_resume(host_set); + + return 0; +} + static int __init sil24_init(void) { return pci_module_init(&sil24_pci_driver); diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 916fe6fba75..ad37871594f 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -297,7 +297,7 @@ static const struct ata_port_operations vsc_sata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_mmio_data_xfer, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, diff --git a/drivers/serial/at91_serial.c b/drivers/serial/at91_serial.c index a7d664383da..54c6b2adf7b 100644 --- a/drivers/serial/at91_serial.c +++ b/drivers/serial/at91_serial.c @@ -41,6 +41,7 @@ #include <asm/mach/serial_at91.h> #include <asm/arch/board.h> #include <asm/arch/system.h> +#include <asm/arch/gpio.h> #if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -140,9 +141,9 @@ static void at91_set_mctrl(struct uart_port *port, u_int mctrl) */ if (port->mapbase == AT91_BASE_US0) { if (mctrl & TIOCM_RTS) - at91_sys_write(AT91_PIOA + PIO_CODR, AT91_PA21_RTS0); + at91_set_gpio_value(AT91_PIN_PA21, 0); else - at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0); + at91_set_gpio_value(AT91_PIN_PA21, 1); } } diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c index 5980c45998c..89ba0df14c2 100644 --- a/fs/lockd/clntproc.c +++ b/fs/lockd/clntproc.c @@ -454,7 +454,7 @@ static void nlmclnt_locks_init_private(struct file_lock *fl, struct nlm_host *ho fl->fl_ops = &nlmclnt_lock_ops; } -static void do_vfs_lock(struct file_lock *fl) +static int do_vfs_lock(struct file_lock *fl) { int res = 0; switch (fl->fl_flags & (FL_POSIX|FL_FLOCK)) { @@ -467,9 +467,7 @@ static void do_vfs_lock(struct file_lock *fl) default: BUG(); } - if (res < 0) - printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", - __FUNCTION__); + return res; } /* @@ -498,6 +496,7 @@ nlmclnt_lock(struct nlm_rqst *req, struct file_lock *fl) struct nlm_host *host = req->a_host; struct nlm_res *resp = &req->a_res; struct nlm_wait *block = NULL; + unsigned char fl_flags = fl->fl_flags; int status = -ENOLCK; if (!host->h_monitored && nsm_monitor(host) < 0) { @@ -505,6 +504,10 @@ nlmclnt_lock(struct nlm_rqst *req, struct file_lock *fl) host->h_name); goto out; } + fl->fl_flags |= FL_ACCESS; + status = do_vfs_lock(fl); + if (status < 0) + goto out; block = nlmclnt_prepare_block(host, fl); again: @@ -539,9 +542,10 @@ again: up_read(&host->h_rwsem); goto again; } - fl->fl_flags |= FL_SLEEP; /* Ensure the resulting lock will get added to granted list */ - do_vfs_lock(fl); + fl->fl_flags = fl_flags | FL_SLEEP; + if (do_vfs_lock(fl) < 0) + printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", __FUNCTION__); up_read(&host->h_rwsem); } status = nlm_stat_to_errno(resp->status); @@ -552,6 +556,7 @@ out_unblock: nlmclnt_cancel(host, req->a_args.block, fl); out: nlm_release_call(req); + fl->fl_flags = fl_flags; return status; } @@ -606,15 +611,19 @@ nlmclnt_unlock(struct nlm_rqst *req, struct file_lock *fl) { struct nlm_host *host = req->a_host; struct nlm_res *resp = &req->a_res; - int status; + int status = 0; /* * Note: the server is supposed to either grant us the unlock * request, or to deny it with NLM_LCK_DENIED_GRACE_PERIOD. In either * case, we want to unlock. */ + fl->fl_flags |= FL_EXISTS; down_read(&host->h_rwsem); - do_vfs_lock(fl); + if (do_vfs_lock(fl) == -ENOENT) { + up_read(&host->h_rwsem); + goto out; + } up_read(&host->h_rwsem); if (req->a_flags & RPC_TASK_ASYNC) @@ -624,7 +633,6 @@ nlmclnt_unlock(struct nlm_rqst *req, struct file_lock *fl) if (status < 0) goto out; - status = 0; if (resp->status == NLM_LCK_GRANTED) goto out; diff --git a/fs/locks.c b/fs/locks.c index 1ad29c9b625..b0b41a64e10 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -725,6 +725,10 @@ next_task: /* Try to create a FLOCK lock on filp. We always insert new FLOCK locks * at the head of the list, but that's secret knowledge known only to * flock_lock_file and posix_lock_file. + * + * Note that if called with an FL_EXISTS argument, the caller may determine + * whether or not a lock was successfully freed by testing the return + * value for -ENOENT. */ static int flock_lock_file(struct file *filp, struct file_lock *request) { @@ -735,6 +739,8 @@ static int flock_lock_file(struct file *filp, struct file_lock *request) int found = 0; lock_kernel(); + if (request->fl_flags & FL_ACCESS) + goto find_conflict; for_each_lock(inode, before) { struct file_lock *fl = *before; if (IS_POSIX(fl)) @@ -750,8 +756,11 @@ static int flock_lock_file(struct file *filp, struct file_lock *request) break; } - if (request->fl_type == F_UNLCK) + if (request->fl_type == F_UNLCK) { + if ((request->fl_flags & FL_EXISTS) && !found) + error = -ENOENT; goto out; + } error = -ENOMEM; new_fl = locks_alloc_lock(); @@ -764,6 +773,7 @@ static int flock_lock_file(struct file *filp, struct file_lock *request) if (found) cond_resched(); +find_conflict: for_each_lock(inode, before) { struct file_lock *fl = *before; if (IS_POSIX(fl)) @@ -777,6 +787,8 @@ static int flock_lock_file(struct file *filp, struct file_lock *request) locks_insert_block(fl, request); goto out; } + if (request->fl_flags & FL_ACCESS) + goto out; locks_copy_lock(new_fl, request); locks_insert_lock(&inode->i_flock, new_fl); new_fl = NULL; @@ -948,8 +960,11 @@ static int __posix_lock_file_conf(struct inode *inode, struct file_lock *request error = 0; if (!added) { - if (request->fl_type == F_UNLCK) + if (request->fl_type == F_UNLCK) { + if (request->fl_flags & FL_EXISTS) + error = -ENOENT; goto out; + } if (!new_fl) { error = -ENOLCK; @@ -996,6 +1011,10 @@ static int __posix_lock_file_conf(struct inode *inode, struct file_lock *request * Add a POSIX style lock to a file. * We merge adjacent & overlapping locks whenever possible. * POSIX locks are sorted by owner task, then by starting address + * + * Note that if called with an FL_EXISTS argument, the caller may determine + * whether or not a lock was successfully freed by testing the return + * value for -ENOENT. */ int posix_lock_file(struct file *filp, struct file_lock *fl) { diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 3ddda6f7ecc..e7ffb4deb3e 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -690,7 +690,9 @@ int nfs_lookup_verify_inode(struct inode *inode, struct nameidata *nd) goto out_force; /* This is an open(2) */ if (nfs_lookup_check_intent(nd, LOOKUP_OPEN) != 0 && - !(server->flags & NFS_MOUNT_NOCTO)) + !(server->flags & NFS_MOUNT_NOCTO) && + (S_ISREG(inode->i_mode) || + S_ISDIR(inode->i_mode))) goto out_force; } return nfs_revalidate_inode(server, inode); diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 4cdd1b499e3..fecd3b095de 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -67,25 +67,19 @@ struct nfs_direct_req { struct kref kref; /* release manager */ /* I/O parameters */ - struct list_head list, /* nfs_read/write_data structs */ - rewrite_list; /* saved nfs_write_data structs */ struct nfs_open_context *ctx; /* file open context info */ struct kiocb * iocb; /* controlling i/o request */ struct inode * inode; /* target file of i/o */ - unsigned long user_addr; /* location of user's buffer */ - size_t user_count; /* total bytes to move */ - loff_t pos; /* starting offset in file */ - struct page ** pages; /* pages in our buffer */ - unsigned int npages; /* count of pages */ /* completion state */ + atomic_t io_count; /* i/os we're waiting for */ spinlock_t lock; /* protect completion state */ - int outstanding; /* i/os we're waiting for */ ssize_t count, /* bytes actually processed */ error; /* any reported error */ struct completion completion; /* wait for i/o completion */ /* commit state */ + struct list_head rewrite_list; /* saved nfs_write_data structs */ struct nfs_write_data * commit_data; /* special write_data for commits */ int flags; #define NFS_ODIRECT_DO_COMMIT (1) /* an unstable reply was received */ @@ -93,8 +87,37 @@ struct nfs_direct_req { struct nfs_writeverf verf; /* unstable write verifier */ }; -static void nfs_direct_write_schedule(struct nfs_direct_req *dreq, int sync); static void nfs_direct_write_complete(struct nfs_direct_req *dreq, struct inode *inode); +static const struct rpc_call_ops nfs_write_direct_ops; + +static inline void get_dreq(struct nfs_direct_req *dreq) +{ + atomic_inc(&dreq->io_count); +} + +static inline int put_dreq(struct nfs_direct_req *dreq) +{ + return atomic_dec_and_test(&dreq->io_count); +} + +/* + * "size" is never larger than rsize or wsize. + */ +static inline int nfs_direct_count_pages(unsigned long user_addr, size_t size) +{ + int page_count; + + page_count = (user_addr + size + PAGE_SIZE - 1) >> PAGE_SHIFT; + page_count -= user_addr >> PAGE_SHIFT; + BUG_ON(page_count < 0); + + return page_count; +} + +static inline unsigned int nfs_max_pages(unsigned int size) +{ + return (size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; +} /** * nfs_direct_IO - NFS address space operation for direct I/O @@ -118,50 +141,21 @@ ssize_t nfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_ return -EINVAL; } -static void nfs_free_user_pages(struct page **pages, int npages, int do_dirty) +static void nfs_direct_dirty_pages(struct page **pages, int npages) { int i; for (i = 0; i < npages; i++) { struct page *page = pages[i]; - if (do_dirty && !PageCompound(page)) + if (!PageCompound(page)) set_page_dirty_lock(page); - page_cache_release(page); } - kfree(pages); } -static inline int nfs_get_user_pages(int rw, unsigned long user_addr, size_t size, struct page ***pages) +static void nfs_direct_release_pages(struct page **pages, int npages) { - int result = -ENOMEM; - unsigned long page_count; - size_t array_size; - - page_count = (user_addr + size + PAGE_SIZE - 1) >> PAGE_SHIFT; - page_count -= user_addr >> PAGE_SHIFT; - - array_size = (page_count * sizeof(struct page *)); - *pages = kmalloc(array_size, GFP_KERNEL); - if (*pages) { - down_read(¤t->mm->mmap_sem); - result = get_user_pages(current, current->mm, user_addr, - page_count, (rw == READ), 0, - *pages, NULL); - up_read(¤t->mm->mmap_sem); - if (result != page_count) { - /* - * If we got fewer pages than expected from - * get_user_pages(), the user buffer runs off the - * end of a mapping; return EFAULT. - */ - if (result >= 0) { - nfs_free_user_pages(*pages, result, 0); - result = -EFAULT; - } else - kfree(*pages); - *pages = NULL; - } - } - return result; + int i; + for (i = 0; i < npages; i++) + page_cache_release(pages[i]); } static inline struct nfs_direct_req *nfs_direct_req_alloc(void) @@ -173,13 +167,13 @@ static inline struct nfs_direct_req *nfs_direct_req_alloc(void) return NULL; kref_init(&dreq->kref); + kref_get(&dreq->kref); init_completion(&dreq->completion); - INIT_LIST_HEAD(&dreq->list); INIT_LIST_HEAD(&dreq->rewrite_list); dreq->iocb = NULL; dreq->ctx = NULL; spin_lock_init(&dreq->lock); - dreq->outstanding = 0; + atomic_set(&dreq->io_count, 0); dreq->count = 0; dreq->error = 0; dreq->flags = 0; @@ -220,18 +214,11 @@ out: } /* - * We must hold a reference to all the pages in this direct read request - * until the RPCs complete. This could be long *after* we are woken up in - * nfs_direct_wait (for instance, if someone hits ^C on a slow server). - * - * In addition, synchronous I/O uses a stack-allocated iocb. Thus we - * can't trust the iocb is still valid here if this is a synchronous - * request. If the waiter is woken prematurely, the iocb is long gone. + * Synchronous I/O uses a stack-allocated iocb. Thus we can't trust + * the iocb is still valid here if this is a synchronous request. */ static void nfs_direct_complete(struct nfs_direct_req *dreq) { - nfs_free_user_pages(dreq->pages, dreq->npages, 1); - if (dreq->iocb) { long res = (long) dreq->error; if (!res) @@ -244,48 +231,10 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) } /* - * Note we also set the number of requests we have in the dreq when we are - * done. This prevents races with I/O completion so we will always wait - * until all requests have been dispatched and completed. + * We must hold a reference to all the pages in this direct read request + * until the RPCs complete. This could be long *after* we are woken up in + * nfs_direct_wait (for instance, if someone hits ^C on a slow server). */ -static struct nfs_direct_req *nfs_direct_read_alloc(size_t nbytes, size_t rsize) -{ - struct list_head *list; - struct nfs_direct_req *dreq; - unsigned int rpages = (rsize + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; - - dreq = nfs_direct_req_alloc(); - if (!dreq) - return NULL; - - list = &dreq->list; - for(;;) { - struct nfs_read_data *data = nfs_readdata_alloc(rpages); - - if (unlikely(!data)) { - while (!list_empty(list)) { - data = list_entry(list->next, - struct nfs_read_data, pages); - list_del(&data->pages); - nfs_readdata_free(data); - } - kref_put(&dreq->kref, nfs_direct_req_release); - return NULL; - } - - INIT_LIST_HEAD(&data->pages); - list_add(&data->pages, list); - - data->req = (struct nfs_page *) dreq; - dreq->outstanding++; - if (nbytes <= rsize) - break; - nbytes -= rsize; - } - kref_get(&dreq->kref); - return dreq; -} - static void nfs_direct_read_result(struct rpc_task *task, void *calldata) { struct nfs_read_data *data = calldata; @@ -294,6 +243,9 @@ static void nfs_direct_read_result(struct rpc_task *task, void *calldata) if (nfs_readpage_result(task, data) != 0) return; + nfs_direct_dirty_pages(data->pagevec, data->npages); + nfs_direct_release_pages(data->pagevec, data->npages); + spin_lock(&dreq->lock); if (likely(task->tk_status >= 0)) @@ -301,13 +253,10 @@ static void nfs_direct_read_result(struct rpc_task *task, void *calldata) else dreq->error = task->tk_status; - if (--dreq->outstanding) { - spin_unlock(&dreq->lock); - return; - } - spin_unlock(&dreq->lock); - nfs_direct_complete(dreq); + + if (put_dreq(dreq)) + nfs_direct_complete(dreq); } static const struct rpc_call_ops nfs_read_direct_ops = { @@ -316,41 +265,60 @@ static const struct rpc_call_ops nfs_read_direct_ops = { }; /* - * For each nfs_read_data struct that was allocated on the list, dispatch - * an NFS READ operation + * For each rsize'd chunk of the user's buffer, dispatch an NFS READ + * operation. If nfs_readdata_alloc() or get_user_pages() fails, + * bail and stop sending more reads. Read length accounting is + * handled automatically by nfs_direct_read_result(). Otherwise, if + * no requests have been sent, just return an error. */ -static void nfs_direct_read_schedule(struct nfs_direct_req *dreq) +static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned long user_addr, size_t count, loff_t pos) { struct nfs_open_context *ctx = dreq->ctx; struct inode *inode = ctx->dentry->d_inode; - struct list_head *list = &dreq->list; - struct page **pages = dreq->pages; - size_t count = dreq->user_count; - loff_t pos = dreq->pos; size_t rsize = NFS_SERVER(inode)->rsize; - unsigned int curpage, pgbase; + unsigned int rpages = nfs_max_pages(rsize); + unsigned int pgbase; + int result; + ssize_t started = 0; + + get_dreq(dreq); - curpage = 0; - pgbase = dreq->user_addr & ~PAGE_MASK; + pgbase = user_addr & ~PAGE_MASK; do { struct nfs_read_data *data; size_t bytes; + result = -ENOMEM; + data = nfs_readdata_alloc(rpages); + if (unlikely(!data)) + break; + bytes = rsize; if (count < rsize) bytes = count; - BUG_ON(list_empty(list)); - data = list_entry(list->next, struct nfs_read_data, pages); - list_del_init(&data->pages); + data->npages = nfs_direct_count_pages(user_addr, bytes); + down_read(¤t->mm->mmap_sem); + result = get_user_pages(current, current->mm, user_addr, + data->npages, 1, 0, data->pagevec, NULL); + up_read(¤t->mm->mmap_sem); + if (unlikely(result < data->npages)) { + if (result > 0) + nfs_direct_release_pages(data->pagevec, result); + nfs_readdata_release(data); + break; + } + + get_dreq(dreq); + data->req = (struct nfs_page *) dreq; data->inode = inode; data->cred = ctx->cred; data->args.fh = NFS_FH(inode); data->args.context = ctx; data->args.offset = pos; data->args.pgbase = pgbase; - data->args.pages = &pages[curpage]; + data->args.pages = data->pagevec; data->args.count = bytes; data->res.fattr = &data->fattr; data->res.eof = 0; @@ -373,33 +341,35 @@ static void nfs_direct_read_schedule(struct nfs_direct_req *dreq) bytes, (unsigned long long)data->args.offset); + started += bytes; + user_addr += bytes; pos += bytes; pgbase += bytes; - curpage += pgbase >> PAGE_SHIFT; pgbase &= ~PAGE_MASK; count -= bytes; } while (count != 0); - BUG_ON(!list_empty(list)); + + if (put_dreq(dreq)) + nfs_direct_complete(dreq); + + if (started) + return 0; + return result < 0 ? (ssize_t) result : -EFAULT; } -static ssize_t nfs_direct_read(struct kiocb *iocb, unsigned long user_addr, size_t count, loff_t pos, struct page **pages, unsigned int nr_pages) +static ssize_t nfs_direct_read(struct kiocb *iocb, unsigned long user_addr, size_t count, loff_t pos) { - ssize_t result; + ssize_t result = 0; sigset_t oldset; struct inode *inode = iocb->ki_filp->f_mapping->host; struct rpc_clnt *clnt = NFS_CLIENT(inode); struct nfs_direct_req *dreq; - dreq = nfs_direct_read_alloc(count, NFS_SERVER(inode)->rsize); + dreq = nfs_direct_req_alloc(); if (!dreq) return -ENOMEM; - dreq->user_addr = user_addr; - dreq->user_count = count; - dreq->pos = pos; - dreq->pages = pages; - dreq->npages = nr_pages; dreq->inode = inode; dreq->ctx = get_nfs_open_context((struct nfs_open_context *)iocb->ki_filp->private_data); if (!is_sync_kiocb(iocb)) @@ -407,8 +377,9 @@ static ssize_t nfs_direct_read(struct kiocb *iocb, unsigned long user_addr, size nfs_add_stats(inode, NFSIOS_DIRECTREADBYTES, count); rpc_clnt_sigmask(clnt, &oldset); - nfs_direct_read_schedule(dreq); - result = nfs_direct_wait(dreq); + result = nfs_direct_read_schedule(dreq, user_addr, count, pos); + if (!result) + result = nfs_direct_wait(dreq); rpc_clnt_sigunmask(clnt, &oldset); return result; @@ -416,10 +387,10 @@ static ssize_t nfs_direct_read(struct kiocb *iocb, unsigned long user_addr, size static void nfs_direct_free_writedata(struct nfs_direct_req *dreq) { - list_splice_init(&dreq->rewrite_list, &dreq->list); - while (!list_empty(&dreq->list)) { - struct nfs_write_data *data = list_entry(dreq->list.next, struct nfs_write_data, pages); + while (!list_empty(&dreq->rewrite_list)) { + struct nfs_write_data *data = list_entry(dreq->rewrite_list.next, struct nfs_write_data, pages); list_del(&data->pages); + nfs_direct_release_pages(data->pagevec, data->npages); nfs_writedata_release(data); } } @@ -427,14 +398,51 @@ static void nfs_direct_free_writedata(struct nfs_direct_req *dreq) #if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4) static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) { - struct list_head *pos; + struct inode *inode = dreq->inode; + struct list_head *p; + struct nfs_write_data *data; - list_splice_init(&dreq->rewrite_list, &dreq->list); - list_for_each(pos, &dreq->list) - dreq->outstanding++; dreq->count = 0; + get_dreq(dreq); + + list_for_each(p, &dreq->rewrite_list) { + data = list_entry(p, struct nfs_write_data, pages); + + get_dreq(dreq); + + /* + * Reset data->res. + */ + nfs_fattr_init(&data->fattr); + data->res.count = data->args.count; + memset(&data->verf, 0, sizeof(data->verf)); + + /* + * Reuse data->task; data->args should not have changed + * since the original request was sent. + */ + rpc_init_task(&data->task, NFS_CLIENT(inode), RPC_TASK_ASYNC, + &nfs_write_direct_ops, data); + NFS_PROTO(inode)->write_setup(data, FLUSH_STABLE); + + data->task.tk_priority = RPC_PRIORITY_NORMAL; + data->task.tk_cookie = (unsigned long) inode; + + /* + * We're called via an RPC callback, so BKL is already held. + */ + rpc_execute(&data->task); + + dprintk("NFS: %5u rescheduled direct write call (req %s/%Ld, %u bytes @ offset %Lu)\n", + data->task.tk_pid, + inode->i_sb->s_id, + (long long)NFS_FILEID(inode), + data->args.count, + (unsigned long long)data->args.offset); + } - nfs_direct_write_schedule(dreq, FLUSH_STABLE); + if (put_dreq(dreq)) + nfs_direct_write_complete(dreq, inode); } static void nfs_direct_commit_result(struct rpc_task *task, void *calldata) @@ -471,8 +479,8 @@ static void nfs_direct_commit_schedule(struct nfs_direct_req *dreq) data->cred = dreq->ctx->cred; data->args.fh = NFS_FH(data->inode); - data->args.offset = dreq->pos; - data->args.count = dreq->user_count; + data->args.offset = 0; + data->args.count = 0; data->res.count = 0; data->res.fattr = &data->fattr; data->res.verf = &data->verf; @@ -534,47 +542,6 @@ static void nfs_direct_write_complete(struct nfs_direct_req *dreq, struct inode } #endif -static struct nfs_direct_req *nfs_direct_write_alloc(size_t nbytes, size_t wsize) -{ - struct list_head *list; - struct nfs_direct_req *dreq; - unsigned int wpages = (wsize + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; - - dreq = nfs_direct_req_alloc(); - if (!dreq) - return NULL; - - list = &dreq->list; - for(;;) { - struct nfs_write_data *data = nfs_writedata_alloc(wpages); - - if (unlikely(!data)) { - while (!list_empty(list)) { - data = list_entry(list->next, - struct nfs_write_data, pages); - list_del(&data->pages); - nfs_writedata_free(data); - } - kref_put(&dreq->kref, nfs_direct_req_release); - return NULL; - } - - INIT_LIST_HEAD(&data->pages); - list_add(&data->pages, list); - - data->req = (struct nfs_page *) dreq; - dreq->outstanding++; - if (nbytes <= wsize) - break; - nbytes -= wsize; - } - - nfs_alloc_commit_data(dreq); - - kref_get(&dreq->kref); - return dreq; -} - static void nfs_direct_write_result(struct rpc_task *task, void *calldata) { struct nfs_write_data *data = calldata; @@ -604,8 +571,6 @@ static void nfs_direct_write_result(struct rpc_task *task, void *calldata) } } } - /* In case we have to resend */ - data->args.stable = NFS_FILE_SYNC; spin_unlock(&dreq->lock); } @@ -619,14 +584,8 @@ static void nfs_direct_write_release(void *calldata) struct nfs_write_data *data = calldata; struct nfs_direct_req *dreq = (struct nfs_direct_req *) data->req; - spin_lock(&dreq->lock); - if (--dreq->outstanding) { - spin_unlock(&dreq->lock); - return; - } - spin_unlock(&dreq->lock); - - nfs_direct_write_complete(dreq, data->inode); + if (put_dreq(dreq)) + nfs_direct_write_complete(dreq, data->inode); } static const struct rpc_call_ops nfs_write_direct_ops = { @@ -635,41 +594,62 @@ static const struct rpc_call_ops nfs_write_direct_ops = { }; /* - * For each nfs_write_data struct that was allocated on the list, dispatch - * an NFS WRITE operation + * For each wsize'd chunk of the user's buffer, dispatch an NFS WRITE + * operation. If nfs_writedata_alloc() or get_user_pages() fails, + * bail and stop sending more writes. Write length accounting is + * handled automatically by nfs_direct_write_result(). Otherwise, if + * no requests have been sent, just return an error. */ -static void nfs_direct_write_schedule(struct nfs_direct_req *dreq, int sync) +static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned long user_addr, size_t count, loff_t pos, int sync) { struct nfs_open_context *ctx = dreq->ctx; struct inode *inode = ctx->dentry->d_inode; - struct list_head *list = &dreq->list; - struct page **pages = dreq->pages; - size_t count = dreq->user_count; - loff_t pos = dreq->pos; size_t wsize = NFS_SERVER(inode)->wsize; - unsigned int curpage, pgbase; + unsigned int wpages = nfs_max_pages(wsize); + unsigned int pgbase; + int result; + ssize_t started = 0; - curpage = 0; - pgbase = dreq->user_addr & ~PAGE_MASK; + get_dreq(dreq); + + pgbase = user_addr & ~PAGE_MASK; do { struct nfs_write_data *data; size_t bytes; + result = -ENOMEM; + data = nfs_writedata_alloc(wpages); + if (unlikely(!data)) + break; + bytes = wsize; if (count < wsize) bytes = count; - BUG_ON(list_empty(list)); - data = list_entry(list->next, struct nfs_write_data, pages); + data->npages = nfs_direct_count_pages(user_addr, bytes); + down_read(¤t->mm->mmap_sem); + result = get_user_pages(current, current->mm, user_addr, + data->npages, 0, 0, data->pagevec, NULL); + up_read(¤t->mm->mmap_sem); + if (unlikely(result < data->npages)) { + if (result > 0) + nfs_direct_release_pages(data->pagevec, result); + nfs_writedata_release(data); + break; + } + + get_dreq(dreq); + list_move_tail(&data->pages, &dreq->rewrite_list); + data->req = (struct nfs_page *) dreq; data->inode = inode; data->cred = ctx->cred; data->args.fh = NFS_FH(inode); data->args.context = ctx; data->args.offset = pos; data->args.pgbase = pgbase; - data->args.pages = &pages[curpage]; + data->args.pages = data->pagevec; data->args.count = bytes; data->res.fattr = &data->fattr; data->res.count = bytes; @@ -693,19 +673,26 @@ static void nfs_direct_write_schedule(struct nfs_direct_req *dreq, int sync) bytes, (unsigned long long)data->args.offset); + started += bytes; + user_addr += bytes; pos += bytes; pgbase += bytes; - curpage += pgbase >> PAGE_SHIFT; pgbase &= ~PAGE_MASK; count -= bytes; } while (count != 0); - BUG_ON(!list_empty(list)); + + if (put_dreq(dreq)) + nfs_direct_write_complete(dreq, inode); + + if (started) + return 0; + return result < 0 ? (ssize_t) result : -EFAULT; } -static ssize_t nfs_direct_write(struct kiocb *iocb, unsigned long user_addr, size_t count, loff_t pos, struct page **pages, int nr_pages) +static ssize_t nfs_direct_write(struct kiocb *iocb, unsigned long user_addr, size_t count, loff_t pos) { - ssize_t result; + ssize_t result = 0; sigset_t oldset; struct inode *inode = iocb->ki_filp->f_mapping->host; struct rpc_clnt *clnt = NFS_CLIENT(inode); @@ -713,17 +700,14 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, unsigned long user_addr, siz size_t wsize = NFS_SERVER(inode)->wsize; int sync = 0; - dreq = nfs_direct_write_alloc(count, wsize); + dreq = nfs_direct_req_alloc(); if (!dreq) return -ENOMEM; + nfs_alloc_commit_data(dreq); + if (dreq->commit_data == NULL || count < wsize) sync = FLUSH_STABLE; - dreq->user_addr = user_addr; - dreq->user_count = count; - dreq->pos = pos; - dreq->pages = pages; - dreq->npages = nr_pages; dreq->inode = inode; dreq->ctx = get_nfs_open_context((struct nfs_open_context *)iocb->ki_filp->private_data); if (!is_sync_kiocb(iocb)) @@ -734,8 +718,9 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, unsigned long user_addr, siz nfs_begin_data_update(inode); rpc_clnt_sigmask(clnt, &oldset); - nfs_direct_write_schedule(dreq, sync); - result = nfs_direct_wait(dreq); + result = nfs_direct_write_schedule(dreq, user_addr, count, pos, sync); + if (!result) + result = nfs_direct_wait(dreq); rpc_clnt_sigunmask(clnt, &oldset); return result; @@ -765,8 +750,6 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, unsigned long user_addr, siz ssize_t nfs_file_direct_read(struct kiocb *iocb, char __user *buf, size_t count, loff_t pos) { ssize_t retval = -EINVAL; - int page_count; - struct page **pages; struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; @@ -788,14 +771,7 @@ ssize_t nfs_file_direct_read(struct kiocb *iocb, char __user *buf, size_t count, if (retval) goto out; - retval = nfs_get_user_pages(READ, (unsigned long) buf, - count, &pages); - if (retval < 0) - goto out; - page_count = retval; - - retval = nfs_direct_read(iocb, (unsigned long) buf, count, pos, - pages, page_count); + retval = nfs_direct_read(iocb, (unsigned long) buf, count, pos); if (retval > 0) iocb->ki_pos = pos + retval; @@ -831,8 +807,6 @@ out: ssize_t nfs_file_direct_write(struct kiocb *iocb, const char __user *buf, size_t count, loff_t pos) { ssize_t retval; - int page_count; - struct page **pages; struct file *file = iocb->ki_filp; struct address_space *mapping = file->f_mapping; @@ -860,14 +834,7 @@ ssize_t nfs_file_direct_write(struct kiocb *iocb, const char __user *buf, size_t if (retval) goto out; - retval = nfs_get_user_pages(WRITE, (unsigned long) buf, - count, &pages); - if (retval < 0) - goto out; - page_count = retval; - - retval = nfs_direct_write(iocb, (unsigned long) buf, count, - pos, pages, page_count); + retval = nfs_direct_write(iocb, (unsigned long) buf, count, pos); /* * XXX: nfs_end_data_update() already ensures this file's diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index b4916b09219..e6ee97f19d8 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3144,9 +3144,6 @@ static int do_vfs_lock(struct file *file, struct file_lock *fl) default: BUG(); } - if (res < 0) - printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", - __FUNCTION__); return res; } @@ -3258,8 +3255,6 @@ static struct rpc_task *nfs4_do_unlck(struct file_lock *fl, return ERR_PTR(-ENOMEM); } - /* Unlock _before_ we do the RPC call */ - do_vfs_lock(fl->fl_file, fl); return rpc_run_task(NFS_CLIENT(lsp->ls_state->inode), RPC_TASK_ASYNC, &nfs4_locku_ops, data); } @@ -3270,30 +3265,28 @@ static int nfs4_proc_unlck(struct nfs4_state *state, int cmd, struct file_lock * struct rpc_task *task; int status = 0; - /* Is this a delegated lock? */ - if (test_bit(NFS_DELEGATED_STATE, &state->flags)) - goto out_unlock; - /* Is this open_owner holding any locks on the server? */ - if (test_bit(LK_STATE_IN_USE, &state->flags) == 0) - goto out_unlock; - status = nfs4_set_lock_state(state, request); + /* Unlock _before_ we do the RPC call */ + request->fl_flags |= FL_EXISTS; + if (do_vfs_lock(request->fl_file, request) == -ENOENT) + goto out; if (status != 0) - goto out_unlock; + goto out; + /* Is this a delegated lock? */ + if (test_bit(NFS_DELEGATED_STATE, &state->flags)) + goto out; lsp = request->fl_u.nfs4_fl.owner; - status = -ENOMEM; seqid = nfs_alloc_seqid(&lsp->ls_seqid); + status = -ENOMEM; if (seqid == NULL) - goto out_unlock; + goto out; task = nfs4_do_unlck(request, request->fl_file->private_data, lsp, seqid); status = PTR_ERR(task); if (IS_ERR(task)) - goto out_unlock; + goto out; status = nfs4_wait_for_completion_rpc_task(task); rpc_release_task(task); - return status; -out_unlock: - do_vfs_lock(request->fl_file, request); +out: return status; } @@ -3461,10 +3454,10 @@ static int nfs4_lock_reclaim(struct nfs4_state *state, struct file_lock *request struct nfs4_exception exception = { }; int err; - /* Cache the lock if possible... */ - if (test_bit(NFS_DELEGATED_STATE, &state->flags)) - return 0; do { + /* Cache the lock if possible... */ + if (test_bit(NFS_DELEGATED_STATE, &state->flags) != 0) + return 0; err = _nfs4_do_setlk(state, F_SETLK, request, 1); if (err != -NFS4ERR_DELAY) break; @@ -3483,6 +3476,8 @@ static int nfs4_lock_expired(struct nfs4_state *state, struct file_lock *request if (err != 0) return err; do { + if (test_bit(NFS_DELEGATED_STATE, &state->flags) != 0) + return 0; err = _nfs4_do_setlk(state, F_SETLK, request, 0); if (err != -NFS4ERR_DELAY) break; @@ -3494,29 +3489,42 @@ static int nfs4_lock_expired(struct nfs4_state *state, struct file_lock *request static int _nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock *request) { struct nfs4_client *clp = state->owner->so_client; + unsigned char fl_flags = request->fl_flags; int status; /* Is this a delegated open? */ - if (NFS_I(state->inode)->delegation_state != 0) { - /* Yes: cache locks! */ - status = do_vfs_lock(request->fl_file, request); - /* ...but avoid races with delegation recall... */ - if (status < 0 || test_bit(NFS_DELEGATED_STATE, &state->flags)) - return status; - } - down_read(&clp->cl_sem); status = nfs4_set_lock_state(state, request); if (status != 0) goto out; + request->fl_flags |= FL_ACCESS; + status = do_vfs_lock(request->fl_file, request); + if (status < 0) + goto out; + down_read(&clp->cl_sem); + if (test_bit(NFS_DELEGATED_STATE, &state->flags)) { + struct nfs_inode *nfsi = NFS_I(state->inode); + /* Yes: cache locks! */ + down_read(&nfsi->rwsem); + /* ...but avoid races with delegation recall... */ + if (test_bit(NFS_DELEGATED_STATE, &state->flags)) { + request->fl_flags = fl_flags & ~FL_SLEEP; + status = do_vfs_lock(request->fl_file, request); + up_read(&nfsi->rwsem); + goto out_unlock; + } + up_read(&nfsi->rwsem); + } status = _nfs4_do_setlk(state, cmd, request, 0); if (status != 0) - goto out; + goto out_unlock; /* Note: we always want to sleep here! */ - request->fl_flags |= FL_SLEEP; + request->fl_flags = fl_flags | FL_SLEEP; if (do_vfs_lock(request->fl_file, request) < 0) printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", __FUNCTION__); -out: +out_unlock: up_read(&clp->cl_sem); +out: + request->fl_flags = fl_flags; return status; } diff --git a/fs/nfs/write.c b/fs/nfs/write.c index bca5734ca9f..86bac6a5008 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -578,7 +578,7 @@ static int nfs_wait_on_requests(struct inode *inode, unsigned long idx_start, un return ret; } -static void nfs_cancel_requests(struct list_head *head) +static void nfs_cancel_dirty_list(struct list_head *head) { struct nfs_page *req; while(!list_empty(head)) { @@ -589,6 +589,19 @@ static void nfs_cancel_requests(struct list_head *head) } } +static void nfs_cancel_commit_list(struct list_head *head) +{ + struct nfs_page *req; + + while(!list_empty(head)) { + req = nfs_list_entry(head->next); + nfs_list_remove_request(req); + nfs_inode_remove_request(req); + nfs_clear_page_writeback(req); + dec_zone_page_state(req->wb_page, NR_UNSTABLE_NFS); + } +} + /* * nfs_scan_dirty - Scan an inode for dirty requests * @inode: NFS inode to scan @@ -1381,6 +1394,7 @@ nfs_commit_list(struct inode *inode, struct list_head *head, int how) nfs_list_remove_request(req); nfs_mark_request_commit(req); nfs_clear_page_writeback(req); + dec_zone_page_state(req->wb_page, NR_UNSTABLE_NFS); } return -ENOMEM; } @@ -1499,7 +1513,7 @@ int nfs_sync_inode_wait(struct inode *inode, unsigned long idx_start, if (pages != 0) { spin_unlock(&nfsi->req_lock); if (how & FLUSH_INVALIDATE) - nfs_cancel_requests(&head); + nfs_cancel_dirty_list(&head); else ret = nfs_flush_list(inode, &head, pages, how); spin_lock(&nfsi->req_lock); @@ -1512,7 +1526,7 @@ int nfs_sync_inode_wait(struct inode *inode, unsigned long idx_start, break; if (how & FLUSH_INVALIDATE) { spin_unlock(&nfsi->req_lock); - nfs_cancel_requests(&head); + nfs_cancel_commit_list(&head); spin_lock(&nfsi->req_lock); continue; } diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h index 2dc93b174a8..f63842c2c09 100644 --- a/include/asm-arm/arch-at91rm9200/irqs.h +++ b/include/asm-arm/arch-at91rm9200/irqs.h @@ -39,12 +39,4 @@ */ #define NR_IRQS (NR_AIC_IRQS + (4 * 32)) - -#ifndef __ASSEMBLY__ -/* - * Initialize the IRQ controller. - */ -extern void at91rm9200_init_irq(unsigned int priority[]); -#endif - #endif diff --git a/include/asm-powerpc/cputime.h b/include/asm-powerpc/cputime.h index a21185d4788..31080448520 100644 --- a/include/asm-powerpc/cputime.h +++ b/include/asm-powerpc/cputime.h @@ -43,6 +43,7 @@ typedef u64 cputime64_t; #define cputime64_zero ((cputime64_t)0) #define cputime64_add(__a, __b) ((__a) + (__b)) +#define cputime64_sub(__a, __b) ((__a) - (__b)) #define cputime_to_cputime64(__ct) (__ct) #ifdef __KERNEL__ @@ -74,6 +75,23 @@ static inline cputime_t jiffies_to_cputime(const unsigned long jif) return ct; } +static inline cputime64_t jiffies64_to_cputime64(const u64 jif) +{ + cputime_t ct; + u64 sec; + + /* have to be a little careful about overflow */ + ct = jif % HZ; + sec = jif / HZ; + if (ct) { + ct *= tb_ticks_per_sec; + do_div(ct, HZ); + } + if (sec) + ct += (cputime_t) sec * tb_ticks_per_sec; + return ct; +} + static inline u64 cputime64_to_jiffies64(const cputime_t ct) { return mulhdu(ct, __cputime_jiffies_factor); diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h index 0f5b89c9323..27c46fbeebd 100644 --- a/include/asm-sparc64/dma-mapping.h +++ b/include/asm-sparc64/dma-mapping.h @@ -160,6 +160,20 @@ static inline void dma_free_coherent(struct device *dev, size_t size, BUG(); } +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG(); +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) +{ + BUG(); +} + #endif /* PCI */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 8f3ab56765a..b04eab2cc66 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -716,6 +716,7 @@ extern spinlock_t files_lock; #define FL_POSIX 1 #define FL_FLOCK 2 #define FL_ACCESS 8 /* not trying to lock, just looking */ +#define FL_EXISTS 16 /* when unlocking, test for existence */ #define FL_LEASE 32 /* lease held on this file */ #define FL_CLOSE 64 /* unlock on close */ #define FL_SLEEP 128 /* A blocking lock */ diff --git a/include/linux/libata.h b/include/linux/libata.h index f4284bf8975..6cc497a2b6d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -131,6 +131,7 @@ enum { ATA_DFLAG_CFG_MASK = (1 << 8) - 1, ATA_DFLAG_PIO = (1 << 8), /* device currently in PIO mode */ + ATA_DFLAG_SUSPENDED = (1 << 9), /* device suspended */ ATA_DFLAG_INIT_MASK = (1 << 16) - 1, ATA_DFLAG_DETACH = (1 << 16), @@ -160,22 +161,28 @@ enum { ATA_FLAG_HRST_TO_RESUME = (1 << 11), /* hardreset to resume phy */ ATA_FLAG_SKIP_D2H_BSY = (1 << 12), /* can't wait for the first D2H * Register FIS clearing BSY */ - ATA_FLAG_DEBUGMSG = (1 << 13), - ATA_FLAG_FLUSH_PORT_TASK = (1 << 14), /* flush port task */ - ATA_FLAG_EH_PENDING = (1 << 15), /* EH pending */ - ATA_FLAG_EH_IN_PROGRESS = (1 << 16), /* EH in progress */ - ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */ - ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */ - ATA_FLAG_LOADING = (1 << 19), /* boot/loading probe */ - ATA_FLAG_UNLOADING = (1 << 20), /* module is unloading */ - ATA_FLAG_SCSI_HOTPLUG = (1 << 21), /* SCSI hotplug scheduled */ + /* The following flag belongs to ap->pflags but is kept in + * ap->flags because it's referenced in many LLDs and will be + * removed in not-too-distant future. + */ + ATA_FLAG_DISABLED = (1 << 23), /* port is disabled, ignore it */ + + /* bits 24:31 of ap->flags are reserved for LLD specific flags */ - ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */ - ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */ + /* struct ata_port pflags */ + ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ + ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ + ATA_PFLAG_FROZEN = (1 << 2), /* port is frozen */ + ATA_PFLAG_RECOVERED = (1 << 3), /* recovery action performed */ + ATA_PFLAG_LOADING = (1 << 4), /* boot/loading probe */ + ATA_PFLAG_UNLOADING = (1 << 5), /* module is unloading */ + ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */ - /* bits 24:31 of ap->flags are reserved for LLDD specific flags */ + ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */ + ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */ + ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ @@ -248,12 +255,19 @@ enum { ATA_EH_REVALIDATE = (1 << 0), ATA_EH_SOFTRESET = (1 << 1), ATA_EH_HARDRESET = (1 << 2), + ATA_EH_SUSPEND = (1 << 3), + ATA_EH_RESUME = (1 << 4), + ATA_EH_PM_FREEZE = (1 << 5), ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET, - ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE, + ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE | ATA_EH_SUSPEND | + ATA_EH_RESUME | ATA_EH_PM_FREEZE, /* ata_eh_info->flags */ ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */ + ATA_EHI_RESUME_LINK = (1 << 1), /* need to resume link */ + ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */ + ATA_EHI_QUIET = (1 << 3), /* be quiet */ ATA_EHI_DID_RESET = (1 << 16), /* already reset this port */ @@ -486,6 +500,7 @@ struct ata_port { const struct ata_port_operations *ops; spinlock_t *lock; unsigned long flags; /* ATA_FLAG_xxx */ + unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int id; /* unique id req'd by scsi midlyr */ unsigned int port_no; /* unique port #; from zero */ unsigned int hard_port_no; /* hardware port #; from zero */ @@ -535,6 +550,9 @@ struct ata_port { struct list_head eh_done_q; wait_queue_head_t eh_wait_q; + pm_message_t pm_mesg; + int *pm_result; + void *private_data; u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */ @@ -589,6 +607,9 @@ struct ata_port_operations { void (*scr_write) (struct ata_port *ap, unsigned int sc_reg, u32 val); + int (*port_suspend) (struct ata_port *ap, pm_message_t mesg); + int (*port_resume) (struct ata_port *ap); + int (*port_start) (struct ata_port *ap); void (*port_stop) (struct ata_port *ap); @@ -622,9 +643,18 @@ struct ata_timing { #define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) -extern const unsigned long sata_deb_timing_boot[]; -extern const unsigned long sata_deb_timing_eh[]; -extern const unsigned long sata_deb_timing_before_fsrst[]; +extern const unsigned long sata_deb_timing_normal[]; +extern const unsigned long sata_deb_timing_hotplug[]; +extern const unsigned long sata_deb_timing_long[]; + +static inline const unsigned long * +sata_ehc_deb_timing(struct ata_eh_context *ehc) +{ + if (ehc->i.flags & ATA_EHI_HOTPLUGGED) + return sata_deb_timing_hotplug; + else + return sata_deb_timing_normal; +} extern void ata_port_probe(struct ata_port *); extern void __sata_phy_reset(struct ata_port *ap); @@ -644,6 +674,8 @@ extern void ata_std_ports(struct ata_ioports *ioaddr); extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports); extern void ata_pci_remove_one (struct pci_dev *pdev); +extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t state); +extern void ata_pci_device_do_resume(struct pci_dev *pdev); extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state); extern int ata_pci_device_resume(struct pci_dev *pdev); extern int ata_pci_clear_simplex(struct pci_dev *pdev); @@ -664,8 +696,9 @@ extern int ata_port_online(struct ata_port *ap); extern int ata_port_offline(struct ata_port *ap); extern int ata_scsi_device_resume(struct scsi_device *); extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state); -extern int ata_device_resume(struct ata_device *); -extern int ata_device_suspend(struct ata_device *, pm_message_t state); +extern int ata_host_set_suspend(struct ata_host_set *host_set, + pm_message_t mesg); +extern void ata_host_set_resume(struct ata_host_set *host_set); extern int ata_ratelimit(void); extern unsigned int ata_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, @@ -825,19 +858,24 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset, (ehi)->desc_len = 0; \ } while (0) -static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) +static inline void __ata_ehi_hotplugged(struct ata_eh_info *ehi) { if (ehi->flags & ATA_EHI_HOTPLUGGED) return; - ehi->flags |= ATA_EHI_HOTPLUGGED; + ehi->flags |= ATA_EHI_HOTPLUGGED | ATA_EHI_RESUME_LINK; ehi->hotplug_timestamp = jiffies; - ehi->err_mask |= AC_ERR_ATA_BUS; ehi->action |= ATA_EH_SOFTRESET; ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1; } +static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) +{ + __ata_ehi_hotplugged(ehi); + ehi->err_mask |= AC_ERR_ATA_BUS; +} + /* * qc helpers */ @@ -921,6 +959,11 @@ static inline unsigned int ata_dev_absent(const struct ata_device *dev) return ata_class_absent(dev->class); } +static inline unsigned int ata_dev_ready(const struct ata_device *dev) +{ + return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED); +} + /* * port helpers */ diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 7c7320fa51a..2d3fb6416d9 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -729,6 +729,7 @@ struct nfs_read_data { struct list_head pages; /* Coalesced read requests */ struct nfs_page *req; /* multi ops per nfs_page */ struct page **pagevec; + unsigned int npages; /* active pages in pagevec */ struct nfs_readargs args; struct nfs_readres res; #ifdef CONFIG_NFS_V4 @@ -747,6 +748,7 @@ struct nfs_write_data { struct list_head pages; /* Coalesced requests we wish to flush */ struct nfs_page *req; /* multi ops per nfs_page */ struct page **pagevec; + unsigned int npages; /* active pages in pagevec */ struct nfs_writeargs args; /* argument struct */ struct nfs_writeres res; /* result struct */ #ifdef CONFIG_NFS_V4 diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 685081c0134..c09396d2c77 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2019,6 +2019,13 @@ #define PCI_VENDOR_ID_TDI 0x192E #define PCI_DEVICE_ID_TDI_EHCI 0x0101 +#define PCI_VENDOR_ID_JMICRON 0x197B +#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360 +#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361 +#define PCI_DEVICE_ID_JMICRON_JMB363 0x2363 +#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365 +#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 +#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 diff --git a/include/net/ieee80211softmac.h b/include/net/ieee80211softmac.h index 7a483ab4022..00ad810eb88 100644 --- a/include/net/ieee80211softmac.h +++ b/include/net/ieee80211softmac.h @@ -104,6 +104,7 @@ struct ieee80211softmac_assoc_info { */ u8 static_essid:1, associating:1, + assoc_wait:1, bssvalid:1, bssfixed:1; diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c index 47ccf159372..72d4d4e04d4 100644 --- a/net/ieee80211/ieee80211_rx.c +++ b/net/ieee80211/ieee80211_rx.c @@ -368,6 +368,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, /* Put this code here so that we avoid duplicating it in all * Rx paths. - Jean II */ +#ifdef CONFIG_WIRELESS_EXT #ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */ /* If spy monitoring on */ if (ieee->spy_data.spy_number > 0) { @@ -396,15 +397,16 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb, wireless_spy_update(ieee->dev, hdr->addr2, &wstats); } #endif /* IW_WIRELESS_SPY */ +#endif /* CONFIG_WIRELESS_EXT */ #ifdef NOT_YET hostap_update_rx_stats(local->ap, hdr, rx_stats); #endif if (ieee->iw_mode == IW_MODE_MONITOR) { - ieee80211_monitor_rx(ieee, skb, rx_stats); stats->rx_packets++; stats->rx_bytes += skb->len; + ieee80211_monitor_rx(ieee, skb, rx_stats); return 1; } diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index de148ae594f..bf042139c7a 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -562,10 +562,13 @@ int ieee80211_tx_frame(struct ieee80211_device *ieee, struct net_device_stats *stats = &ieee->stats; struct sk_buff *skb_frag; int priority = -1; + int fraglen = total_len; + int headroom = ieee->tx_headroom; + struct ieee80211_crypt_data *crypt = ieee->crypt[ieee->tx_keyidx]; spin_lock_irqsave(&ieee->lock, flags); - if (encrypt_mpdu && !ieee->sec.encrypt) + if (encrypt_mpdu && (!ieee->sec.encrypt || !crypt)) encrypt_mpdu = 0; /* If there is no driver handler to take the TXB, dont' bother @@ -581,20 +584,24 @@ int ieee80211_tx_frame(struct ieee80211_device *ieee, goto success; } - if (encrypt_mpdu) + if (encrypt_mpdu) { frame->frame_ctl |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); + fraglen += crypt->ops->extra_mpdu_prefix_len + + crypt->ops->extra_mpdu_postfix_len; + headroom += crypt->ops->extra_mpdu_prefix_len; + } /* When we allocate the TXB we allocate enough space for the reserve * and full fragment bytes (bytes_per_frag doesn't include prefix, * postfix, header, FCS, etc.) */ - txb = ieee80211_alloc_txb(1, total_len, ieee->tx_headroom, GFP_ATOMIC); + txb = ieee80211_alloc_txb(1, fraglen, headroom, GFP_ATOMIC); if (unlikely(!txb)) { printk(KERN_WARNING "%s: Could not allocate TXB\n", ieee->dev->name); goto failed; } txb->encrypted = 0; - txb->payload_size = total_len; + txb->payload_size = fraglen; skb_frag = txb->fragments[0]; diff --git a/net/ieee80211/softmac/ieee80211softmac_assoc.c b/net/ieee80211/softmac/ieee80211softmac_assoc.c index 5e9a90651d0..44215ce64d4 100644 --- a/net/ieee80211/softmac/ieee80211softmac_assoc.c +++ b/net/ieee80211/softmac/ieee80211softmac_assoc.c @@ -47,9 +47,7 @@ ieee80211softmac_assoc(struct ieee80211softmac_device *mac, struct ieee80211soft dprintk(KERN_INFO PFX "sent association request!\n"); - /* Change the state to associating */ spin_lock_irqsave(&mac->lock, flags); - mac->associnfo.associating = 1; mac->associated = 0; /* just to make sure */ /* Set a timer for timeout */ @@ -63,6 +61,7 @@ void ieee80211softmac_assoc_timeout(void *d) { struct ieee80211softmac_device *mac = (struct ieee80211softmac_device *)d; + struct ieee80211softmac_network *n; unsigned long flags; spin_lock_irqsave(&mac->lock, flags); @@ -75,11 +74,12 @@ ieee80211softmac_assoc_timeout(void *d) mac->associnfo.associating = 0; mac->associnfo.bssvalid = 0; mac->associated = 0; + + n = ieee80211softmac_get_network_by_bssid_locked(mac, mac->associnfo.bssid); spin_unlock_irqrestore(&mac->lock, flags); dprintk(KERN_INFO PFX "assoc request timed out!\n"); - /* FIXME: we need to know the network here. that requires a bit of restructuring */ - ieee80211softmac_call_events(mac, IEEE80211SOFTMAC_EVENT_ASSOCIATE_TIMEOUT, NULL); + ieee80211softmac_call_events(mac, IEEE80211SOFTMAC_EVENT_ASSOCIATE_TIMEOUT, n); } void @@ -203,6 +203,10 @@ ieee80211softmac_assoc_work(void *d) if (mac->associated) ieee80211softmac_send_disassoc_req(mac, WLAN_REASON_DISASSOC_STA_HAS_LEFT); + spin_lock_irqsave(&mac->lock, flags); + mac->associnfo.associating = 1; + spin_unlock_irqrestore(&mac->lock, flags); + /* try to find the requested network in our list, if we found one already */ if (bssvalid || mac->associnfo.bssfixed) found = ieee80211softmac_get_network_by_bssid(mac, mac->associnfo.bssid); @@ -295,19 +299,32 @@ ieee80211softmac_assoc_work(void *d) memcpy(mac->associnfo.associate_essid.data, found->essid.data, IW_ESSID_MAX_SIZE + 1); /* we found a network! authenticate (if necessary) and associate to it. */ - if (!found->authenticated) { + if (found->authenticating) { + dprintk(KERN_INFO PFX "Already requested authentication, waiting...\n"); + if(!mac->associnfo.assoc_wait) { + mac->associnfo.assoc_wait = 1; + ieee80211softmac_notify_internal(mac, IEEE80211SOFTMAC_EVENT_ANY, found, ieee80211softmac_assoc_notify_auth, NULL, GFP_KERNEL); + } + return; + } + if (!found->authenticated && !found->authenticating) { /* This relies on the fact that _auth_req only queues the work, * otherwise adding the notification would be racy. */ if (!ieee80211softmac_auth_req(mac, found)) { - dprintk(KERN_INFO PFX "cannot associate without being authenticated, requested authentication\n"); - ieee80211softmac_notify_internal(mac, IEEE80211SOFTMAC_EVENT_ANY, found, ieee80211softmac_assoc_notify_auth, NULL, GFP_KERNEL); + if(!mac->associnfo.assoc_wait) { + dprintk(KERN_INFO PFX "Cannot associate without being authenticated, requested authentication\n"); + mac->associnfo.assoc_wait = 1; + ieee80211softmac_notify_internal(mac, IEEE80211SOFTMAC_EVENT_ANY, found, ieee80211softmac_assoc_notify_auth, NULL, GFP_KERNEL); + } } else { printkl(KERN_WARNING PFX "Not authenticated, but requesting authentication failed. Giving up to associate\n"); + mac->associnfo.assoc_wait = 0; ieee80211softmac_call_events(mac, IEEE80211SOFTMAC_EVENT_ASSOCIATE_FAILED, found); } return; } /* finally! now we can start associating */ + mac->associnfo.assoc_wait = 0; ieee80211softmac_assoc(mac, found); } diff --git a/net/ieee80211/softmac/ieee80211softmac_auth.c b/net/ieee80211/softmac/ieee80211softmac_auth.c index 90b8484e509..ebc33ca6e69 100644 --- a/net/ieee80211/softmac/ieee80211softmac_auth.c +++ b/net/ieee80211/softmac/ieee80211softmac_auth.c @@ -36,8 +36,9 @@ ieee80211softmac_auth_req(struct ieee80211softmac_device *mac, struct ieee80211softmac_auth_queue_item *auth; unsigned long flags; - if (net->authenticating) + if (net->authenticating || net->authenticated) return 0; + net->authenticating = 1; /* Add the network if it's not already added */ ieee80211softmac_add_network(mac, net); @@ -92,7 +93,6 @@ ieee80211softmac_auth_queue(void *data) return; } net->authenticated = 0; - net->authenticating = 1; /* add a timeout call so we eventually give up waiting for an auth reply */ schedule_delayed_work(&auth->work, IEEE80211SOFTMAC_AUTH_TIMEOUT); auth->retry--; diff --git a/net/ieee80211/softmac/ieee80211softmac_io.c b/net/ieee80211/softmac/ieee80211softmac_io.c index 09541611e48..8cc8b20f5cd 100644 --- a/net/ieee80211/softmac/ieee80211softmac_io.c +++ b/net/ieee80211/softmac/ieee80211softmac_io.c @@ -229,6 +229,9 @@ ieee80211softmac_assoc_req(struct ieee80211_assoc_request **pkt, return 0; ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_ASSOC_REQ, net->bssid, net->bssid); + /* Fill in the capabilities */ + (*pkt)->capability = ieee80211softmac_capabilities(mac, net); + /* Fill in Listen Interval (?) */ (*pkt)->listen_interval = cpu_to_le16(10); diff --git a/net/ieee80211/softmac/ieee80211softmac_wx.c b/net/ieee80211/softmac/ieee80211softmac_wx.c index 0e65ff4e33f..75320b6842a 100644 --- a/net/ieee80211/softmac/ieee80211softmac_wx.c +++ b/net/ieee80211/softmac/ieee80211softmac_wx.c @@ -70,12 +70,44 @@ ieee80211softmac_wx_set_essid(struct net_device *net_dev, char *extra) { struct ieee80211softmac_device *sm = ieee80211_priv(net_dev); + struct ieee80211softmac_network *n; + struct ieee80211softmac_auth_queue_item *authptr; int length = 0; unsigned long flags; - + + /* Check if we're already associating to this or another network + * If it's another network, cancel and start over with our new network + * If it's our network, ignore the change, we're already doing it! + */ + if((sm->associnfo.associating || sm->associated) && + (data->essid.flags && data->essid.length && extra)) { + /* Get the associating network */ + n = ieee80211softmac_get_network_by_bssid(sm, sm->associnfo.bssid); + if(n && n->essid.len == (data->essid.length - 1) && + !memcmp(n->essid.data, extra, n->essid.len)) { + dprintk(KERN_INFO PFX "Already associating or associated to "MAC_FMT"\n", + MAC_ARG(sm->associnfo.bssid)); + return 0; + } else { + dprintk(KERN_INFO PFX "Canceling existing associate request!\n"); + spin_lock_irqsave(&sm->lock,flags); + /* Cancel assoc work */ + cancel_delayed_work(&sm->associnfo.work); + /* We don't have to do this, but it's a little cleaner */ + list_for_each_entry(authptr, &sm->auth_queue, list) + cancel_delayed_work(&authptr->work); + sm->associnfo.bssvalid = 0; + sm->associnfo.bssfixed = 0; + spin_unlock_irqrestore(&sm->lock,flags); + flush_scheduled_work(); + } + } + + spin_lock_irqsave(&sm->lock, flags); - + sm->associnfo.static_essid = 0; + sm->associnfo.assoc_wait = 0; if (data->essid.flags && data->essid.length && extra /*required?*/) { length = min(data->essid.length - 1, IW_ESSID_MAX_SIZE); diff --git a/net/sched/act_api.c b/net/sched/act_api.c index 5b9397b3323..599423cc9d0 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -250,15 +250,17 @@ tcf_action_dump(struct sk_buff *skb, struct tc_action *act, int bind, int ref) RTA_PUT(skb, a->order, 0, NULL); err = tcf_action_dump_1(skb, a, bind, ref); if (err < 0) - goto rtattr_failure; + goto errout; r->rta_len = skb->tail - (u8*)r; } return 0; rtattr_failure: + err = -EINVAL; +errout: skb_trim(skb, b - skb->data); - return -err; + return err; } struct tc_action *tcf_action_init_1(struct rtattr *rta, struct rtattr *est, @@ -305,6 +307,7 @@ struct tc_action *tcf_action_init_1(struct rtattr *rta, struct rtattr *est, goto err_mod; } #endif + *err = -ENOENT; goto err_out; } @@ -776,7 +779,7 @@ replay: return ret; } -static char * +static struct rtattr * find_dump_kind(struct nlmsghdr *n) { struct rtattr *tb1, *tb2[TCA_ACT_MAX+1]; @@ -804,7 +807,7 @@ find_dump_kind(struct nlmsghdr *n) return NULL; kind = tb2[TCA_ACT_KIND-1]; - return (char *) RTA_DATA(kind); + return kind; } static int @@ -817,16 +820,15 @@ tc_dump_action(struct sk_buff *skb, struct netlink_callback *cb) struct tc_action a; int ret = 0; struct tcamsg *t = (struct tcamsg *) NLMSG_DATA(cb->nlh); - char *kind = find_dump_kind(cb->nlh); + struct rtattr *kind = find_dump_kind(cb->nlh); if (kind == NULL) { printk("tc_dump_action: action bad kind\n"); return 0; } - a_o = tc_lookup_action_n(kind); + a_o = tc_lookup_action(kind); if (a_o == NULL) { - printk("failed to find %s\n", kind); return 0; } @@ -834,7 +836,7 @@ tc_dump_action(struct sk_buff *skb, struct netlink_callback *cb) a.ops = a_o; if (a_o->walk == NULL) { - printk("tc_dump_action: %s !capable of dumping table\n", kind); + printk("tc_dump_action: %s !capable of dumping table\n", a_o->kind); goto rtattr_failure; } diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index 49174f0d0a3..6ac45103a27 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -191,7 +191,6 @@ _shift_data_right_pages(struct page **pages, size_t pgto_base, do { /* Are any pointers crossing a page boundary? */ if (pgto_base == 0) { - flush_dcache_page(*pgto); pgto_base = PAGE_CACHE_SIZE; pgto--; } @@ -211,11 +210,11 @@ _shift_data_right_pages(struct page **pages, size_t pgto_base, vto = kmap_atomic(*pgto, KM_USER0); vfrom = kmap_atomic(*pgfrom, KM_USER1); memmove(vto + pgto_base, vfrom + pgfrom_base, copy); + flush_dcache_page(*pgto); kunmap_atomic(vfrom, KM_USER1); kunmap_atomic(vto, KM_USER0); } while ((len -= copy) != 0); - flush_dcache_page(*pgto); } /* |