diff options
66 files changed, 1929 insertions, 558 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dae718ab1d6..c941fd06b2a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1583,6 +1583,7 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 355 if ARCH_U8500 + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts new file mode 100644 index 00000000000..8a5dff807b4 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -0,0 +1,25 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Globalscale Technologies Dreamplug"; + compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + serial@f1012000 { + compatible = "ns16550a"; + reg = <0xf1012000 0xff>; + reg-shift = <2>; + interrupts = <33>; + clock-frequency = <200000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi new file mode 100644 index 00000000000..771c6bbeb29 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -0,0 +1,6 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "marvell,kirkwood"; +}; + diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 825d2957da0..61f38580997 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -35,6 +35,11 @@ i2c@7000d000 { clock-frequency = <400000>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; }; serial@70006000 { @@ -74,4 +79,25 @@ sdhci@c8000600 { support-8bit; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 79 1>; /* gpio PJ7, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wifi { + label = "wifi-led"; + gpios = <&gpio 24 0>; + linux,default-trigger = "rfkill0"; + }; + }; }; diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index fd5d3041d71..351d6708c3a 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -11,11 +11,14 @@ CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_DEV_INITRD=y # CONFIG_ELF_CORE is not set CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y @@ -27,18 +30,20 @@ CONFIG_MACH_PAZ00=y CONFIG_MACH_TRIMSLICE=y CONFIG_MACH_WARIO=y CONFIG_MACH_VENTANA=y -CONFIG_TEGRA_DEBUG_UARTD=y -CONFIG_ARM_ERRATA_742230=y +CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y -CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_AUTO_ZRELADDR=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -68,7 +73,6 @@ CONFIG_IPV6_MULTIPLE_TABLES=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y -CONFIG_MISC_DEVICES=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y CONFIG_ICS932S401=y @@ -76,6 +80,7 @@ CONFIG_APDS9802ALS=y CONFIG_ISL29003=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y @@ -85,8 +90,7 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y # CONFIG_WLAN is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set +CONFIG_INPUT_EVDEV=y # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set @@ -96,13 +100,15 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_TPS6586X=y CONFIG_SOUND=y CONFIG_SND=y @@ -116,11 +122,13 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y +CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_STORAGE=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y @@ -130,6 +138,11 @@ CONFIG_STAGING=y CONFIG_IIO=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_AK8975=y +CONFIG_MFD_NVEC=y +CONFIG_KEYBOARD_NVEC=y +CONFIG_SERIO_NVEC_PS2=y +CONFIG_TEGRA_IOMMU_GART=y +CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -138,13 +151,12 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y @@ -162,9 +174,8 @@ CONFIG_DEBUG_SG=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_TWOFISH=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CRC_CCITT=y -CONFIG_CRC16=y diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index dfad6538b27..98997c2da26 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -179,7 +179,9 @@ config MACH_SMDKV310 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI @@ -225,7 +227,9 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 @@ -262,11 +266,14 @@ config MACH_NURI select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S3C_DEV_I2C6 select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY @@ -276,6 +283,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_I2C6 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select S5P_SETUP_MIPIPHY @@ -296,7 +304,9 @@ config MACH_ORIGEN select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 select S5P_DEV_FIMD0 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index aa37179d776..191f5c675fe 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -28,6 +28,7 @@ #include <video/platform_lcd.h> #include <media/m5mols.h> +#include <media/s5k6aa.h> #include <media/s5p_fimc.h> #include <media/v4l2-mediabus.h> @@ -75,6 +76,7 @@ enum fixed_regulator_id { FIXED_REG_ID_MAX8903, FIXED_REG_ID_CAM_A28V, FIXED_REG_ID_CAM_12V, + FIXED_REG_ID_CAM_VT_15V, }; static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { @@ -399,6 +401,9 @@ static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ }; +static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = { + REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */ +}; static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ }; @@ -431,7 +436,7 @@ static struct regulator_consumer_supply __initdata max8997_buck1_[] = { REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ }; static struct regulator_consumer_supply __initdata max8997_buck2_[] = { - REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ + REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */ }; static struct regulator_consumer_supply __initdata max8997_buck3_[] = { REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ @@ -546,6 +551,8 @@ static struct regulator_init_data __initdata max8997_ldo6_data = { .enabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer), + .consumer_supplies = nuri_max8997_ldo6_consumer, }; static struct regulator_init_data __initdata max8997_ldo7_data = { @@ -742,7 +749,7 @@ static struct regulator_init_data __initdata max8997_buck2_data = { .constraints = { .name = "VINT_1.1V_C210", .min_uV = 900000, - .max_uV = 1100000, + .max_uV = 1200000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, .always_on = 1, .state_mem = { @@ -957,7 +964,6 @@ static struct max8997_platform_data __initdata nuri_max8997_pdata = { .regulators = nuri_max8997_regulators, .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, - .buck2_gpiodvs = true, .buck1_voltage[0] = 1350000, /* 1.35V */ .buck1_voltage[1] = 1300000, /* 1.3V */ @@ -1116,7 +1122,30 @@ static void __init nuri_ehci_init(void) } /* CAMERA */ +static struct regulator_consumer_supply cam_vt_cam15_supply = + REGULATOR_SUPPLY("vdd_core", "6-003c"); + +static struct regulator_init_data cam_vt_cam15_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_vt_cam15_supply, +}; + +static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = { + .supply_name = "VT_CAM_1.5V", + .microvolts = 1500000, + .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */ + .enable_high = 1, + .init_data = &cam_vt_cam15_reg_init_data, +}; + +static struct platform_device cam_vt_cam15_fixed_rdev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V, + .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg }, +}; + static struct regulator_consumer_supply cam_vdda_supply[] = { + REGULATOR_SUPPLY("vdda", "6-003c"), REGULATOR_SUPPLY("a_sensor", "0-001f"), }; @@ -1173,6 +1202,21 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = { #define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */ #define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5) +#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0) +#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1) + +static struct s5k6aa_platform_data s5k6aa_pldata = { + .mclk_frequency = 24000000UL, + .gpio_reset = { GPIO_CAM_VT_NRST, 0 }, + .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 }, + .bus_type = V4L2_MBUS_PARALLEL, + .horiz_flip = 1, +}; + +static struct i2c_board_info s5k6aa_board_info = { + I2C_BOARD_INFO("S5K6AA", 0x3c), + .platform_data = &s5k6aa_pldata, +}; static struct m5mols_platform_data m5mols_platdata = { .gpio_reset = GPIO_CAM_MEGA_RST, @@ -1185,6 +1229,13 @@ static struct i2c_board_info m5mols_board_info = { static struct s5p_fimc_isp_info nuri_camera_sensors[] = { { + .flags = V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &s5k6aa_board_info, + .clk_frequency = 24000000UL, + .i2c_bus_num = 6, + }, { .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, .bus_type = FIMC_MIPI_CSI2, @@ -1200,11 +1251,13 @@ static struct s5p_platform_fimc fimc_md_platdata = { }; static struct gpio nuri_camera_gpios[] = { + { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, + { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, }; -static void nuri_camera_init(void) +static void __init nuri_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), &s5p_device_mipi_csis0); @@ -1224,6 +1277,8 @@ static void nuri_camera_init(void) pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__); /* Free GPIOs controlled directly by the sensor drivers. */ + gpio_free(GPIO_CAM_VT_NRST); + gpio_free(GPIO_CAM_VT_NSTBY); gpio_free(GPIO_CAM_MEGA_RST); if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) { @@ -1234,15 +1289,27 @@ static void nuri_camera_init(void) s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4); } +static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = { + .frequency = 400000U, + .sda_delay = 200, + .bus_num = 6, +}; + static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = { .frequency = 400000U, .sda_delay = 200, }; +/* DEVFREQ controlling memory/bus */ +static struct platform_device exynos4_bus_devfreq = { + .name = "exynos4210-busfreq", +}; + static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ &s3c_device_i2c5, /* PMIC should initialize first */ &s3c_device_i2c0, + &s3c_device_i2c6, &emmc_fixed_voltage, &s5p_device_mipi_csis0, &s5p_device_fimc0, @@ -1259,6 +1326,8 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_i2c3, &i2c9_gpio, &s3c_device_adc, + &s5p_device_g2d, + &s5p_device_jpeg, &s3c_device_rtc, &s5p_device_mfc, &s5p_device_mfc_l, @@ -1271,8 +1340,10 @@ static struct platform_device *nuri_devices[] __initdata = { &nuri_backlight_device, &max8903_fixed_reg_dev, &nuri_max8903_device, + &cam_vt_cam15_fixed_rdev, &cam_vdda_fixed_rdev, &cam_8m_12v_fixed_rdev, + &exynos4_bus_devfreq, }; static void __init nuri_map_io(void) @@ -1302,6 +1373,7 @@ static void __init nuri_machine_init(void) i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); + s3c_i2c6_set_platdata(&nuri_i2c6_platdata); s5p_fimd0_set_platdata(&nuri_fb_pdata); diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index b4d032d5c87..878d4c99142 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -20,6 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/mfd/max8997.h> #include <linux/lcd.h> +#include <linux/rfkill-gpio.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -235,6 +236,7 @@ static struct regulator_init_data __initdata max8997_ldo9_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -278,6 +280,7 @@ static struct regulator_init_data __initdata max8997_ldo14_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -293,6 +296,7 @@ static struct regulator_init_data __initdata max8997_ldo17_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -602,6 +606,23 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = { .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +/* Bluetooth rfkill gpio platform data */ +struct rfkill_gpio_platform_data origen_bt_pdata = { + .reset_gpio = EXYNOS4_GPX2(2), + .shutdown_gpio = -1, + .type = RFKILL_TYPE_BLUETOOTH, + .name = "origen-bt", +}; + +/* Bluetooth Platform device */ +static struct platform_device origen_device_bluetooth = { + .name = "rfkill_gpio", + .id = -1, + .dev = { + .platform_data = &origen_bt_pdata, + }, +}; + static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_hsmmc0, @@ -613,9 +634,12 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_fimc_md, &s5p_device_fimd0, + &s5p_device_g2d, &s5p_device_hdmi, &s5p_device_i2c_hdmiphy, + &s5p_device_jpeg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -623,6 +647,7 @@ static struct platform_device *origen_devices[] __initdata = { &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, + &origen_device_bluetooth, }; /* LCD Backlight data */ @@ -636,6 +661,16 @@ static struct platform_pwm_backlight_data origen_bl_data = { .pwm_period_ns = 1000, }; +static void __init origen_bt_setup(void) +{ + gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART"); + /* 4 UART Pins configuration */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2)); + /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */ + s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT); + s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); +} + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -689,6 +724,8 @@ static void __init origen_machine_init(void) platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); |