diff options
101 files changed, 9670 insertions, 668 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f47cf9af3bc..1b7e5c2e90e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -93,15 +93,49 @@ choice prompt "ARM system type" default ARCH_VERSATILE +config ARCH_AAEC2000 + bool "Agilent AAEC-2000 based" + select ARM_AMBA + help + This enables support for systems based on the Agilent AAEC-2000 + +config ARCH_INTEGRATOR + bool "ARM Ltd. Integrator family" + select ARM_AMBA + select ICST525 + help + Support for ARM's Integrator platform. + +config ARCH_REALVIEW + bool "ARM Ltd. RealView family" + select ARM_AMBA + select ICST307 + help + This enables support for ARM Ltd RealView boards. + +config ARCH_VERSATILE + bool "ARM Ltd. Versatile family" + select ARM_AMBA + select ARM_VIC + select ICST307 + help + This enables support for ARM Ltd Versatile board. + +config ARCH_AT91RM9200 + bool "Atmel AT91RM9200" + help + Say Y here if you intend to run this kernel on an Atmel + AT91RM9200-based board. + config ARCH_CLPS7500 - bool "Cirrus-CL-PS7500FE" + bool "Cirrus CL-PS7500FE" select TIMER_ACORN select ISA help Support for the Cirrus Logic PS7500FE system-on-a-chip. config ARCH_CLPS711X - bool "CLPS711x/EP721x-based" + bool "Cirrus Logic CLPS711x/EP721x-based" help Support for Cirrus Logic 711x/721x based boards. @@ -135,12 +169,22 @@ config ARCH_FOOTBRIDGE Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -config ARCH_INTEGRATOR - bool "Integrator" - select ARM_AMBA - select ICST525 +config ARCH_NETX + bool "Hilscher NetX based" + select ARM_VIC help - Support for ARM's Integrator platform. + This enables support for systems based on the Hilscher NetX Soc + +config ARCH_H720X + bool "Hynix HMS720x-based" + select ISA_DMA_API + help + This enables support for systems based on the Hynix HMS720x + +config ARCH_IMX + bool "IMX" + help + Support for Motorola's i.MX family of processors (MX1, MXL). config ARCH_IOP3XX bool "IOP3xx-based" @@ -178,6 +222,11 @@ config ARCH_L7200 If you have any questions or comments about the Linux kernel port to this board, send e-mail to <sjhill@cotw.com>. +config ARCH_PNX4008 + bool "Philips Nexperia PNX4008 Mobile" + help + This enables support for Philips PNX4008 mobile platform. + config ARCH_PXA bool "PXA2xx-based" select ARCH_MTD_XIP @@ -232,49 +281,6 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_VERSATILE - bool "Versatile" - select ARM_AMBA - select ARM_VIC - select ICST307 - help - This enables support for ARM Ltd Versatile board. - -config ARCH_REALVIEW - bool "RealView" - select ARM_AMBA - select ICST307 - help - This enables support for ARM Ltd RealView boards. - -config ARCH_IMX - bool "IMX" - help - Support for Motorola's i.MX family of processors (MX1, MXL). - -config ARCH_H720X - bool "Hynix-HMS720x-based" - select ISA_DMA_API - help - This enables support for systems based on the Hynix HMS720x - -config ARCH_AAEC2000 - bool "Agilent AAEC-2000 based" - select ARM_AMBA - help - This enables support for systems based on the Agilent AAEC-2000 - -config ARCH_AT91RM9200 - bool "AT91RM9200" - help - Say Y here if you intend to run this kernel on an Atmel - AT91RM9200-based board. - -config ARCH_PNX4008 - bool "Philips Nexperia PNX4008 Mobile" - help - This enables support for Philips PNX4008 mobile platform. - endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -319,6 +325,8 @@ source "arch/arm/mach-realview/Kconfig" source "arch/arm/mach-at91rm9200/Kconfig" +source "arch/arm/mach-netx/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6c97aa70d3b..282b14e2f46 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -117,6 +117,7 @@ endif machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200 machine-$(CONFIG_ARCH_EP93XX) := ep93xx machine-$(CONFIG_ARCH_PNX4008) := pnx4008 + machine-$(CONFIG_ARCH_NETX) := netx ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/compressed/head-at91rm9200.S b/arch/arm/boot/compressed/head-at91rm9200.S index 2119ea62b54..57a3b163b2c 100644 --- a/arch/arm/boot/compressed/head-at91rm9200.S +++ b/arch/arm/boot/compressed/head-at91rm9200.S @@ -49,6 +49,18 @@ cmp r7, r3 beq 99f + @ Embest ATEB9200 : 923 + mov r3, #(MACH_TYPE_ATEB9200 & 0xff) + orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00) + cmp r7, r3 + beq 99f + + @ Sperry-Sun KAFA : 662 + mov r3, #(MACH_TYPE_KAFA & 0xff) + orr r3, r3, #(MACH_TYPE_KAFA & 0xff00) + cmp r7, r3 + beq 99f + @ Unknown board, use the AT91RM9200DK board @ mov r7, #MACH_TYPE_AT91RM9200 mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 3cd8c9ee451..045e37e0733 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -49,13 +49,6 @@ #define SHARPSL_CHARGE_CO_CHECK_TIME 5 /* 5 msec */ #define SHARPSL_CHARGE_RETRY_CNT 1 /* eqv. 10 min */ -#define SHARPSL_CHARGE_ON_VOLT 0x99 /* 2.9V */ -#define SHARPSL_CHARGE_ON_TEMP 0xe0 /* 2.9V */ -#define SHARPSL_CHARGE_ON_ACIN_HIGH 0x9b /* 6V */ -#define SHARPSL_CHARGE_ON_ACIN_LOW 0x34 /* 2V */ -#define SHARPSL_FATAL_ACIN_VOLT 182 /* 3.45V */ -#define SHARPSL_FATAL_NOACIN_VOLT 170 /* 3.40V */ - /* * Prototypes */ @@ -82,12 +75,13 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger); static int get_percentage(int voltage) { int i = sharpsl_pm.machinfo->bat_levels - 1; + int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0; struct battery_thresh *thresh; if (sharpsl_pm.charge_mode == CHRG_ON) - thresh=sharpsl_pm.machinfo->bat_levels_acin; + thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_acin_bl : sharpsl_pm.machinfo->bat_levels_acin; else - thresh=sharpsl_pm.machinfo->bat_levels_noac; + thresh = bl_status ? sharpsl_pm.machinfo->bat_levels_noac_bl : sharpsl_pm.machinfo->bat_levels_noac; while (i > 0 && (voltage > thresh[i].voltage)) i--; @@ -131,7 +125,7 @@ static void sharpsl_battery_thread(void *private_) sharpsl_pm.battstat.ac_status = (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN) ? APM_AC_ONLINE : APM_AC_OFFLINE); /* Corgi cannot confirm when battery fully charged so periodically kick! */ - if (machine_is_corgi() && (sharpsl_pm.charge_mode == CHRG_ON) + if (!sharpsl_pm.machinfo->batfull_irq && (sharpsl_pm.charge_mode == CHRG_ON) && time_after(jiffies, sharpsl_pm.charge_start_time + SHARPSL_CHARGE_ON_TIME_INTERVAL)) schedule_work(&toggle_charger); @@ -166,11 +160,11 @@ static void sharpsl_battery_thread(void *private_) && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) { if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) { - corgibl_limit_intensity(1); + sharpsl_pm.machinfo->backlight_limit(1); sharpsl_pm.flags |= SHARPSL_BL_LIMIT; } } else if (sharpsl_pm.flags & SHARPSL_BL_LIMIT) { - corgibl_limit_intensity(0); + sharpsl_pm.machinfo->backlight_limit(0); sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; } @@ -418,7 +412,7 @@ static int sharpsl_check_battery_temp(void) val = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val); - if (val > SHARPSL_CHARGE_ON_TEMP) + if (val > sharpsl_pm.machinfo->charge_on_temp) return -1; return 0; @@ -450,7 +444,7 @@ static int sharpsl_check_battery_voltage(void) val = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "Battery Voltage: %d\n", val); - if (val < SHARPSL_CHARGE_ON_VOLT) + if (val < sharpsl_pm.machinfo->charge_on_volt) return -1; return 0; @@ -468,7 +462,7 @@ static int sharpsl_ac_check(void) temp = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp); - if ((temp > SHARPSL_CHARGE_ON_ACIN_HIGH) || (temp < SHARPSL_CHARGE_ON_ACIN_LOW)) { + if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) { dev_err(sharpsl_pm.dev, "Error: AC check failed.\n"); return -1; } @@ -627,8 +621,8 @@ static int sharpsl_fatal_check(void) temp = get_select_val(buff); dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); - if ((acin && (temp < SHARPSL_FATAL_ACIN_VOLT)) || - (!acin && (temp < SHARPSL_FATAL_NOACIN_VOLT))) + if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || + (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) return -1; return 0; } diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig new file mode 100644 index 00000000000..69c39e09874 --- /dev/null +++ b/arch/arm/configs/ateb9200_defconfig @@ -0,0 +1,1312 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.17-rc3 +# Sun May 7 16:53:18 2006 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_VECTORS_BASE=0xffff0000 |